Trend Micro Trend Micro ServerProtect For ServerProtect For

LinuxLinux

System Requirements

• Hardware(For 1.3 , 1.25, 1.2)– Intel™ Pentium™ II processor (or higher) or AMD™ Athlon™ processor– • 128MB RAM or more– • 25MB of available disk space for the /opt directory– • 8MB of available disk space for the /tmp directory

• Supported distributions and kernels– Red Hat Enterprise Linux (AS, ES, WS) 2.1 1.25

• Note : ServerProtect in kernel-independent mode is the mode supported for thesedistributions. Therefore, only manual and scheduled scanning is available.

– Red Hat Enterprise Linux (AS, ES, WS) 3.0 1.3• 2.4.21-4.EL smp• 2.4.21-4.EL up• 2.4.21-9.0.1.EL smp• 2.4.21-9.0.1.EL up• Note :For other kernels and distributions, refer to the following Web site for additional

information: www.trendmicro.com/en/products/file-server/sp-linux/use/kernel.htm

– SUSE LINUX Enterprise Server 1.2• SUSE LINUX Enterprise Server 8 for z/Linux - 2.4.19-3suse

• IBM S/390– IBM S/390 Multiprise 3000 Enterprise Server (MP3000) 7060– IBM Parallel Enterprise Server G5 (G5) 9672 – IBM Parallel Enterprise Server G6 (G6) 9672 –

• IBM zSeries– - IBM eServer zSeries 800 (z800) 2066 – - IBM eServer zSeries 900 (z900) 2064

– Turbolinux 10 Server • 2.6.8-1 up• 2.6.8-1 smp

– Asianux 1.0 • 2.4.21-9.30AX up • 2.4.21-9.30AX smp

– Miracle Linux 2.1 • 2.4.9-31.22ml up• 2.4.9-31.22ml smp

• Supported Web browsers for ServerProtect Web console– Microsoft™ Internet Explorer 5.5 with Service Pack 2 or higher

– • Mozilla 1.4 or higher

– Note: Install Sun Micro™ Java™ 2 Runtime Environment 1.4.2_01 when using

Mozilla to access ServerProtect Web console. Otherwise, product registration

and access to the ServerProtect online help will not work.

– Note : The libgcc-3.2.2-5.i586.rpm (or above) package should be installed.

Otherwise, accessing the ServerProtect Web console via a Mozilla browser

will not work.

• Supported XWindow graphical desktop environments for simple GUI console– KDE 2.2.2-2 or higher

InstallInstall

解開 splx-redhat-v13.gztar –zxvf splx-redhat-v13.gz

解開 splx-redhat-v13.gz可以看到下列檔案

SPLX_1.3_GSG_RedHat.pdfSPLX_1.3_README_Redhat.txt

SProtectLinux-1.3.RedHat.i686.binMD5SUM

執行安裝程式./Sprotectlinux1.3.RedHat.i686.bin

License AgreementLicense Agreement

Active ProductActive Product

可以用 Ctrl + D 放棄啟動可以繼續安裝

使用 uname –a 找出Kernel 的版本

下載適當的 Kernel Hook

將下載的 Kernel Hook解壓，複製到

/opt/TrendMicro/SProtectLinux/SPLX.module/

將 splx的服務重新啟動#Service splx restart

Install CompleteInstall Complete

http://FQDN:14942

Verifying Installation

• After completing the installation, verify that ServerProtect is running optimally.

• To verify ServerProtect is running optimally, type the following at the command line:– /etc/init.d/splx status– The output should show all running processes, for example:– splxmod module is running...– vsapiapp (pid 3854 3852 3851 3850 3849 3840) is running...

– entity (pid 3845 3844) is running...– ServerProtect for Linux core is running– splxhttpd (pid 3869 3868 3867 3866 3865 3864) is running...

– ServerProtect for Linux httpd is running

• If a service appears as "stopped", review the installation process.

Removing ServerProtect

• To remove ServerProtect:– Type the following at the command line:

•rpm -e SProtectLinux

Configuration

不需密碼可直接登入

Real-Time Scan

Scheduled Scan

Manual Scan

Exclusion List

Quarantine Directory

Backup Director

Recipents

Alert Settings

Update

Log

Administration

Registration

Thanks