*'Trans Energy,"

..Trans Energy,"

RADIANT CEILING PANELS TYPICAL APPLICATIONS

• OUTSIDE GLASS CORRIDORS • ENCLOSED WALKWAYS

• BUILDING RESTORATION

Trans Energy panels can heat glass corridors.

Trans Energy radiant panels were chosen for this restored train station to achieve an architectural blend with the existing structure .

Trans Energy panels heat this 350,000 square foot energy award winning office building.

Flexibil ity of design with Trans Energy heaters permits full use of rloor space.

A continuous row of ceiling panels offsets window wall heat loss in this cafeteria.

2

..Trans Energy"

RP SERIES RADIANT CEILING PANELS

• UNIQUE CRYSTALLINE SURFACE • T-BAR, SURFACE OR RECESS MOUNTING

• 2'X2' OR 2'X4' STANDARD -CUSTOM SIZES AVAILABLE • TEGULAR SYSTEM OPTION

• SILKSCREEN OR CUSTOM COLOR TO BLEND WITH CEILING

APPLICATIONS

OFFICE BUILDING entryways, enclosed

walkways and perimeter heat with vari­

able air volume systems.

INSTITUTIONAL classrooms, cafeterias

and swimming pool areas.

HOSPITAL hydrotherapy, nurseries, burn

and trauma areas.

RESIDENTIAL bathrooms, above floor to

ceiling windows and sliding doors, other

cold spot areas.

For complete or supplemental heating in

commercial, residential and institutional

structures - in new or remodeled con­

struction ... whenever the utility and

comfort of radiant ceiling heating is

desired.

Clean, gentle, comfortable heat that is

ideal for offsetting perimeter heat loss ...

saving substantial energy over other sys­

tems by heating people and objects

rather than all the air in a room or build­

ing.

People are comfortable at lower room

temperatures with a radiant system than

with convection or forced-air systems ...

comfortable in the 60's rather than in the

70's. And lower thermostat settings save

on energy bills each year.

A simple system, easy to install, easy to

control room by room without wasting

energy needlessly heating unoccupied

spaces.

Trans Energy panels allow full usage of

wall and floor space. No noise. No mov­

ing parts. No maintenance. No ceiling,

walls or drapes to clean. No dried out air.

3

METAL: Extruded Aluminum. Decorative Frame:

0.62" thick, 3" deep.

STANDARD FEATURES CUTAWAY DRAWING OF A HEATING PANEL

24 GAUGE STEEL BACK OF UNIT

~i~~~~~~I[ MIN. 1 INCH, 1 POUND DENSITY HIGH TEMPERATURE FIBERGLASS INSULATION (

ELECTRIC HEATING ELEMENT (GRAPHIT E)

OIEELECTRIC INSULATION

.1Ii~iiji~iijjiiiiiiiii_.~.- 22 GAUGE STEEL FRONT OF UNIT

CRYSTALLINE SURFACE

METAL: Back - 24 Gauge Galvanized or Aluminized Steel. Front - 22 Gauge Galvanized or Aluminized Steel. Sides - Overlapping Front and Back

SELECTION CHART CATALOG NO I VOLTS I WATTS I DtM(lN.)

RP2501 RP2508 RP2502 RP2507 RP2503

120 208 240 277 347

250

24 RP3101 120 RP3108 208 X RP3102 240 310 24 RP3107 277 RP2103 347 X

1RP3751 RP3758

120 208

RP3752 240 375 RP3757 277 RP3753 347 RP5001 RP5008 RP5002 RP5007 RP5003

120 208 240 277 347

500

24

X

48

X

1

RP6251 RP6258 RP6252 RP6257 RP6253

120 208 240 277 347

625

RP7501 120 RP7508 208 RP7502 240 750 RP7507 277 RP7503 347

CRYSTALLINE SURFACE - Trans Energy's unique crystalline surface greatly enhances the radiant characteristics of the heating panel.

Trans Energy's radiant output is in the 8-10 micron wavelength, This is ideal for comfort, Human skin will absorb 99% of the radiant energy in these wavelengths. Humans them ­selves radiate heat predominately in that micron range, Without Trans Energy's crys­talline surface a panel will be less radiant, operate at higher temperature and produce energy at shorter wavelengths.

WIRE: Internal - 200°C, 14 Gauge, Teflon insulated. Exlernal - Pig Tails with 48" of 1/2" flexible conduit and connector for J-Box.

ELEMENT: Graphite based, uniform temperature distribution over entire panel suriace.

INSULATION: Minimum 1 inch, 1 pound density, high temperature fiber­glass.

SURFACE: All ceiling and wall mounted radiant panels are coated with radiant unique crystalline suriace,

ELEMENT - Our graphite based heating element assures uniform temperatures and long life. Trans Energy has been using graphite heating elements since 1969 and has proven their superior reliability,

WIRING: For connection to the main power supply, the heater is completely prewired, with the lead wires housed in a 48-inch length of flexible metal conduit and connec­tor for J-80x mounting . Appropriate wiring diagrams appear on the back of the panel.

WIRING DIAGRAMS: HEATERS MUST BE

PROPERLY GROUNDED

A W G GAR

120 VOlT, 2-WlR£ 2"0 VOLT. 2·W~E HEATER HEATER

208 VOLT. 2 WIRE 277 VOlT. 2-WIRE SUPPLY LINE VOlTAGE SUPPt.Y

THERMOSTAT"­ORSWITCH

(NOT INClUDED ­SEE CATALOG)

/.

B W G8 8 G 277 VOlT, 2-WIRE 208 VOlT, 2-WIAE

HEATERHEATER

3047 VOLT. 2-W1RE LIM: VOlTAGE SUPPLY THERMOSTAT' ORSW!TCH

(NOT INCLUDED­seE CATALOG)

BLUE W G

347 VOLT, 2-WIRE HEATER

@. l®lISTEOI Certified

File # E21609 File # LR40928

ACCESSORIES PRODUCT I DESCRtPTION

MBSF2424 Surface Mounting Frame for

24" x 24" Panels

MBSF2448 Surface Mounting Frame for

24" x 48" Panels

MBRF2424 Recess Mounting Frame for

24" x 24" Panels

MBRF2448 Recess Mounting Frame for

24" x 48" Panels

SURFACE MOUNTING KIT

FRAME CONSTRUCTION FOR SURFACE MOUNT PANELS

WOOD : Heaters can be framed In wood

Consult your Trans Energy factory representative for specifics.

RECESS MOUNTING KIT

END FRAME

SIDE FRAME

FRAME CONSTRUCTtON FOR RECESSED PANELS

METAL : Extruded aluminum , Inverted " T", " r .125 thick by 1,432 by 1.875" high.

CERTIFICATION AND SAFETY FIRE RATING - Trans Energy panels do not have a fire rating per se, but con­struction is of fire retardant materials, Panels normally are treated as like fix­tures. If necessary, acoustical tile can be placed on top of the panels .

HAZARDOUS AREAS - Trans Energy panels do not have a hazardous rating.

""­

" ­

4

----------------

CUSTOM FEATURES

1. CUSTOM SIZE PANELS While a wide variety of panel sizes are listed as standard, the factory produces thousands of panels each year of varying widths and lengths to order.

SELECTION CHART CATALOG INUMBER

WIDTH (IN.) I LENGTH I(IN.)

TO DETERMINE MAX WATTS. ~qULTlPLY

MBTH**@@# 10-13

14-17

18-21

22-28

10-96

14-96

18-96

22-61

LENGTH OF PANEL LESS 2" BY 6.62

LENGTH OF PANEL LESS 2" BY 9.94

LENGTH OF PANEL LESS 2" BY 13.25

LENGTH OF PANEL LESS 2" BY 16.30

MBRM**@@# 22-28 62-96 LENGTH OF PANEL LESS 2" BY 13.58

Width of panel NOTE: Other wattage combinations@@ Lenglh of panel available, consult factory.

Voltage Designation: 1 =120; 8 =208; 2 =240; 7 =277

2. CUSTOM SIZE FRAMES

ACCESSORIES

."mmmiil~.Suriace Mounting Frame

Recess Mountin Frame

** Width of Heater (10" to 28")

@@Lenglh of Heater (10" to 96")

3. TEGULAR (Revealed edge) Tegular systems may utilize a standard grid

with a one-inch cross-T or a "fine-line" grid

with a 5/8" cross-To The acoustical tile is

notched to hang below the grid creating the

revealed edge. Our Tegular panels are

built with a support angle on all four sides to allow the panel front to drop flush with

the finished ceiling .

TEGUlAR (Revealed Edge) SYSTEM

TEGULAR CEILING TILE

T·BARGRID T·BAR GRID TEGULAR CEILINGTILE

FINELINE TEGUlAR SYSTEM

EARTHQUAKE cups i RADIANT "'" CEILING PANEL

" ~ u....:),J".~'--"-J LJ...-"-"--"'-...../..... I

T·BAR GRID T·BAR GRID c~,i~NUG~~E

Tegular and Fineline Tegular panels are

supplied standard with earthquake clips

installed for support chain .

4. CONCEALED SPLINE SYSTEMS

These systems utilize ceiling tiles notched

to hide the T-bar grid. Our panels will be

treated in a manner similar to the lights in

such a system. We will build a custom

recessed frame and panel to fit inside the

grid opening. The recessed frame will be

suspended independently of the T-bar grid. The result is a flush-mounted panel with an

exposed trim finishing off the adjacent tiles

and supporting the panel.

5. SILKSCREENING Radiant heating panels can be silkscreened

to provide an architectural blend with lead­

ing acoustical files. For T-bar, concealed spline and tegular ceiling systems.

6. CUSTOM COLOR Panels can be painted an color desired with high temperature acrylic paints without

affecting panel performance.

Radiant energy is emitted from panels in

the 8-10 micron wavelength range. One of

the principal characteristics of this wave­

length is that it is not color selective as are

shorter wavelengths. Consequently, the

surface color of the panel is unimportant to

heating efficiency and can be considered

solely in the light of aesthetics.

7. PANEL FRONTS FOR A CONTINUOUS CEILING LINE

To provide a continuous ceiling line around

the perimeter of a building, the factory can provide panel fronts to be interspersed

between the functioning heating panels. Field-trimmable filler panels also are avail­

able.

8. SEAL TIGHT FLEXIBLE CONDUIT and CONNECTORS

Ceiling panels come with 1/2" Greenfield

flexible conduit and straight connectors as

standard equipment. Seal tight connectors

and conduit can be substituted at the facto­

ry if panels are to be used in high moisture

areas or if required by local electrical

codes.

9. FACTORY SILICONE SEALED PANELS FOR USE IN HIGH MOISTURE

AREAS - Exterior moisture and condensa­

tion do not affect panel performance, but

water inside the unit can cause the panel to

fail. Panels being used in shower rooms

and swimming pool areas should be totally

sealed with silicone at the factory before shipment. If there is a chance of moisture

above the ceiling, then seal tight conduit

and seal tight connectors also should be

used .

10. LONGER FLEXIBLE CONDUIT We will replace the standard 48" Greenfield

with up to 11 ' of 1/2" flexible conduit.

11. CONTROLS PIE switches are available factory prewired

to heaters. 20 amps @ 120V, 208V, 240V

and 277V.

12. EARTHQUAKE CLIPS If T-bar panels are to be suspended, the

factory can supply Earthquake clips with a hole for support chains.

13. HEAVIER DUTY PANELS For special installations the factory can use heavier gauge steel in the construction of

the panels.

14. STAINLESS STEEL CONSTRUCTION

PANELS FOR CHLORINE STORAGE AREAS - Special stainless steel panels are

available for chlorine storage areas.

Panels will be equipped with seal tight con­

nectors and silicone sealed.

15. MODULAR WIRING SYSTEMS For specific jobs, the factory can substitute

modular connectors for the straight con­

nectors and pig tails that are standard

equipment.

5

~Trans Energy,.

HPRH SERIES INFRARED HEATER, FOR BURN AND TRAUMA PATIENTS

• RECESS CEILING MOUNTED • WALL MOUNTED HEAT DECK CONTROL PANEL

• PATIENT LEVEL SENSOR PROBE

Hypothermia is a primary concern when

treating burn and trauma patients.

The HPRH radiant heating system pro­vides gentle warmth to the patient without affecting the surrounding area

temperatu res.

A heat deck is recess mounted in the ceiling above the patient's bed, out of

the way until it is needed.

Operated from a wall-mounted con­

trol panel, the heat deck is easily

lowered and raised.

The heat deck's three radiant heat­ing panels are energized from the

control panel either individually, or in combination, to provide heat to the

patient's head, torso, or lower

extremities.

With a temperature probe located at

patient level, the solid state tempera­

ture controller is manually set to the desired temperature and then auto­

matically regulated.

SELECTION CHART

HEATER ASSEMBLY

MODEL I I I HEATER ITOTAL IMOUNTING NO. VOLTS PH WAns AMPS HEIGHT

HPRH135010B B

HPRH1350109 120 1350 13.7 9

HPRH1350110 10

ACCESSORIES MODEL NO. DESCRIPTIONI

HPRHCP1 Controt Panel - Wall Mounted ­120 VAC

HPRHP1 Patient Temperature Probe

i®LlSTEOi FILE # E'155071

HEALTH CARE CEILING PANEL APPLICATIONS

Radiant panels provide draft-free

warmth in:

Nurseries

Baby X-Ray stations

Early Recovery

Isolation rooms

Examination rooms

Patient bathrooms

Administration areas

Neonatal areas

Hydrotherapy areas

Infant intensive care units

Infant intensive care units

Hydrotherapy areas

6

CATALOG NUMBER I VOLTS" I WATTS I BTU/HR. I ELEMENT TYPE CATALOG NUMBERS

IR26MS17-20B IR26MS-17-240/4BO IR26MS-17-277

208' 240/480'

277' 1700 5800 METAL SHEATH

IR""26

IR26QT-20-20B IR26QT-20-240/4BO IR26QT-20-277

208 240/480'

277 2000 6824 QUARTZ TUBE

IR26QL-32-20B IR26QL-32-240/4BO IR26QL-32-277

208 240/480*

277 3200 10918 QUARTZ LAMP

IR35MS-30-20B IR35MS-30-240/4BO IR35MS-30-277

208 240/480*

277

3000 10236 METAL SHEATH

IR'*'*35

IR35QT-30-20B IR35QT-30-240/4BO IR35QT-30-277

208 240/480*

277

3000 10236 QUARTZ TUBE

IR35QL-50-4BO 480* 5000 17060 QUARTZ LAMP

IR4BMS-40-20B IR4BMS-40-240/4BO IR4BMS-40-277

208 240/480'

277

4000 13648 METAL SHEATH IR*"'48

..Trans Energy,"

IR SERIES ELECTRIC INFRARED HEATERS

• 1600 TO 5000 WATTS • CHAIN OR CONDUIT MOUNT

• OPTIONAL SURFACE MOUNTING KIT • INDOOR I OUTDOOR MODEL • PIGTAIL LEADS • ONE ELEMENT OR TWO ELEMENT MODELS

• METAL SHEATH, QUARTZ TUBE AND QUARTZ LAMP ELEMENTS

APPLICATIONS SELECTION CHART (Double Element Fixture) - Select Elements Below Trans Energy IR Series infrared heaters can be used for spot or localized area heating or total heating. The very nature of infrared radiation permits the heaters to be used in areas where convection or fan-forced heaters would be completely ineffective.

I USE WITH FIXTURE

CATALOG NUMBER I REFLECTOR ANGLE (DEGREE)

IR30S26 30 SYM

IR60S26 60 SYM

IR90S26 90 SYM

IR30AS26 30 ASYM

IR60AS26 60 ASYM

IR30S35 30 SYM

IR60S35 60 SYM

IR90S35 90 SYM

IR30AS35 30 ASYM

IR60AS35 60 ASYM

IR30S48 30 SYM

IR60S48 60 SYM

IR90S48 90 SYM

IR30AS48 30 ASYM

IR60AS48 60 ASYM

TWO ELEMENT HEATER DIMENSIONS: IR""26 - 4"H x 10"W x 26-1 /4"L IR··..35 - 4"H x 10"W x 35-1 /4"L IW"'48 - 4"H x 10"W x 48-1 /4"L

I® LISTED c®1

SELECTION CHART (Elements) *Also Available in Stainless Steel

ONE ELEMENT HEATER DIMENSIONS: IR16 -3-5/8"H x 5-3/4"W x 25-1/2"L I R25 -3-5/8"H x 5-3/4"W x 34-1 /2"L

I® LISTEDIFILE # E21609

* Two elements wired In senes ** Single phase 60 Hz

SURFACE MOUNTING KITS - For IR Double Element Heaters CATALOG NUMBER USE WITH FIXTURE CATALOG NUMBERS

IRHSMK-26 IR****26

IRSMK-35 IR****35

IRSMK-48 IR****4B

LIMITATIONS RADIANT HEATERS SINGLE ELEMENT HEATER -Includes Element Heater must be operated with elements in I WATTS I BTUIHR. IELEMENT TYPE

IREFLECTOR ANGLE CATALOG NUMBER I VOLTS I DEGREE) horizontal plane. May be mounted end to

208IR16-91 S-20Bend. Minimum 36" between heaters side by 240 1600 5460 OL 90SYMIR16-91 S-240side. Minimum clearance between heater 277IR16-91 S-277

and combustible surfaces: top 5"; 480 2500 8530 OL 90 SYMIR25-91 S-4BOend/sides: 24"; bottom: 72".

7

..Trans Energy~

MRP SERIES STAINLESS STEEL FIXTURE INDUSTRIAL INFRARED HEATERS

• INDOOR I OUTDOOR MODEL • QUARTZ LAMPS

• 3200 OR 5000 WATTS • SPOT OR TOTAL HEATING

• OPTIONAL ACCESSORY WI RE GUARD AVAILABLE

YRN SERIES OVERHEAD INFRARED HEATERS • WASHDOWN

• METAL SHEATH ELEMENT

i®LlSTEu l FILE # E21609

APPLICATIONS Designed for heavy duty spot or total heating applications. Warehouses, loading docks, waste water treatment plants, water treat­ment plants, snow melting.

Quartz Infrared Lamps, equipped with pig-tail leads for more positive connection on rugged applications where physical abuse is a problem.

Lamps included with each heater.

Minimum Mounting Height: 10Ft.

ACCESSORIES DIMENSIONS: 3200W - 3-5/8 H x 10-5/8 W x 25-1 /2 L 5000W - 3-5/8 H x 1 0-5/8 W x 34-1 /2 L

SELECTION CHART

I

CATALOG NUMBER WAns

I IREFLECTOR I ELEMENT VOLTS PHASE ANGLE TYPE

MRP326S8

MRP326S2

MRP326S7 3 ,200

208

240/480

277

1 60° Sym Quartz

Lamp

MRP506S4 5,000 480 1 60° Sym

APPLICATIONS For permanent mounting in areas where low mounting heights or low watt density patterns are required.

Min. Mounting Height: 8 Ft. i® LI STED I FILE # E21609

SELECTION CHART

YRN10ll 1,000

YRN1511 1,500 120

YRN1521 1,500 90° Symm

YRN2021 2,000 240

YRN2521 2,500

ACCESSORIES

Metal

Sheath

CATALOG OTY WIRE GUARDS NUMBER REOUIRED FOR CRN SERIES

NWG05 For use wilh YRN2521 1 3

For use with YRN1011NWG10 2 For use wilh YRN2021

NWG15 For use with YRN1511 & YRN1521

CONTROL PANELS CONTROLS FOR METAL SHEATH INFRARED HEATERS A PACKAG ED PRE-WIRED COMBINATION

THERMOSTAT CYCLING CONTROLLERS OF: CONTROLLER , TRANSFORMER AND

FOR AREA TEMPERATURE CONTROL FOR PERCENTAGE CONTROL OF ONE OR CONTACTOR .

MORE HEATERS.

:8 ~ I,

SELECTION CHART SELECTION CHART SELECTION CHART

8

..Trans Energym

XRM SERIES HEAVY DUTY, INDUSTRIAL INFRARED HEATERS

• METAL SHEATH ELEMENT

• WASH DOWN

• OPTIONAL ACCESSORY WIRE GUARD AVAILABLE

CONTROLS FOR METAL SHEATH INFRARED HEATERS

4,5 KW

6KW

13,5 KW

SHOWN WITH ACCESSORY SCREEN

SELECTION CHART

APPLICATIONS

Designed for heavy duty spot heating applications. Warehouses, loading docks and assembly lines.

Heavy duty metal sheath heating ele­ments.

For spot heating hang individually or in groups.

Gasketed terminal box UL Listed for dust-tight and weather-proof applica­tions.

Heater can be washed down AFTER BEING DISCONNECTED.

Optional wire guard available for all units.

Permanently installed - Hang like light fixtures.

Minimum Mounting Height: 4,500 watt units 12' 6,000 watt units 12'

13,500 watt units 14'

l®lISTED I FILE # E21609

ACCESSORIES

CONTROL PANELS A PACKAGED PRE-WIRED COMBINATION

OF: CONTROLLER, TRANSFORMER AND

CONTACTOR ,

:8

SELECTION CHART

CYCLING CONTROLLERS FOR PERCENTAGE CONTROL OF ONE OR

MORE HEATERS,

SELECTION CHART

3PHC2 3 PH 3PHC4 3 PH 24

PH

THERMOSTAT FOR AREA TEMPERATURE CONTROL

XRM4521 240 XRM4541

4,500 480

CATALOG I OTY I WIRE GUARDS NUMBER REOUIRED FOR BRM SERIES

MWG45 For use with XRM4500 Series

MWG60 For use with XRM6000 Series XRM6023 240 3* Metal

6,000 480 90 0 Sym MWG135 For use with XRM 13500 Series

XRM6043 3 Sheath

XRM13523 13,500 240 3

SELECTION CHART

XRM13543 480

*Field convertible to single phase.

9

..Trans Energy,.

WRL SERIES ROLLAROUND INFRARED HEATERS

• PORTABLE • SAFETY SCREEN STANDARD

• WASHDOWN• INDOOR I OUTDOOR USE

• OPTIONAL ACCESSORY CORD SETS AVAILABLE

APPLICATIONS

Economical answer to warm workmen, heat

loading docks or thaw equipment where per­

manent installed heaters are not practical.

Portable - Mounted on two wheeled carts for

ease of movement to hard to heat spots.

Heavy duty metal sheath heating elements.

Weatherproof for indoor or outdoor use.

Heater can be washed down

AFTER BEING DISCONNECTED.

Safety Screen standard .

25 ft. optional accessory cord sets available.

COVERAGE

WRL4500 Series - 30 deg. arc within 10 It. WRL6000 Series - 45 deg. arc within 12 It.

Provide heat for workmen WRL 13500 Series - 45 deg. arc within 20 It. and thawing equipment

SELECTION CHART ACCESSORIES

Help thaw frozen equipment

4,500 480

WRL6023 240 3*

WRL6043 6,000 480 3

90' Sym

WRL13543 13,500 480 3

Metal

Sheath For use with WRL6023,

LC425 25 WRL6043 & WRL 13543

*Field convertible to single phase.

10

..Trans Energy,.

MeH SERIES COVE HEATERS

• "SUNSHINE" TYPE HEATING • COMFORT AT LOWERTEMPERATURES

• DUAL FUNCTION HEATING • CONVENIENT WALL MOUNTING - NEAR CEILING

• INDIVIDUAL ROOM CONTROL • COLOR COORDINATED OFF-WHITE FINISH

• HIGH EFFICIENCY VITREOUS ENAMEL RADIATING SURFACE

APPLICATIONS Trans Energy MCH Series Cove Heaters can fulfill the requirements of virtually any type residential or commercial heating situation. Individual room control, ease of installation and out-of-the-way mounting make it equally desir­able for total or supplemental comfort heating.

DIMENSIONS TOP VIEW

,[+" »Ii II " " "Ii WALL } " Ii II " )j " 5~~2'71S ' REAR VIEW

CEIUNG LINE

1. MOUNTING BRACKET

_2·1/4" __ __ C>

SLOTTEO KNOCK-OuTS '------ -3'· 10132' --------<

CE ILI NG./ lJL.U /~ .r. oJ. _ /.LJ,. .!.L..il_ ~

MINI MUM ClEARANCES: • 2 I • .,' MIN 10 DAY WALL CEIUNG ' 4-1i7 M I ~j TO LAY ·INOR VINYL CflllNG

I'mptASl lC MOlDH~G

HEATEflS TO BE MOUNTED AT LEAST SIX (6) FEET FROM THE FLOOR.

I@ LlSTEol FILE # E21609

INDIVIDUAL ROOM CONTROL - The finite control available with electric heat permits indi­vidual room or zone control for greater economy; why heat the entire house when you are using only one or two rooms? This applies equally well for whole house heating or supple­mental heating. COMFORT AT LOWER TEMPERATURES -In non-radiant types of heating systems, it is nec­essary to warm and circulate air in order to keep the temperature in a room at a comfort­able level. The warmer air, in turn, warms the furniture and people in the room. With radiant heating, furniture and people are heated direct­ly. The surrounding air eventually becomes warm, but the comfort level is not dependent upon the air temperature. Room temperature can be lowered 3 to 5 degrees while still main­taining the same comfort level. Furniture, walls, floors, etc., absorb some of the energy and act as a heat bank, releasing some of the warmth back into the room during the "off' peri­od of the normal "on-off' cycle of the cove heaters . HIGH EFFICIENCY RADIATING SURFACE­The extruded aluminum front panel is coated with a lifetime vitreous enamel which has one of the highest levels for radiating heat energy of any known substance, radiating a majority of its heat energy from the front surface. The remaining energy is "wiped off" the element and back frame by a convection flow behind and over the top of the heater which circulates warm air into the room , under furniture, etc. COLOR COORDINATED - Heaters are an off­white color to compliment any interior wall design. CONVENIENT WALL MOUNTING - NEAR CEILING - The MCH cove heater mounts on any wall surface, near the ceiling where its dual function heating can be fully utilized. Radiant heat energy is directed downward, warming people and objects near the floor, as well as the floor itself. Room air gains heat from these objects and rises toward the ceiling. The back side of the cove heater acts as a convector heater, pulling the cooler air from the floor area, behind and over the heater, thus helping to circulate and mix the air in the room until it reaches an equilibrium temperature. The out­of-the -way mounting also permits complete freedom of furniture placement in a room, because the heaters will not be subjected to blockage, which reduces the efficiency of floor or low-wall-mounted heaters.

SELEC,.ION CHART

MCH-4512 120 3.7

MCH-4508 208 450 1536 2.2

MCH-4524 240 1.9

MCH-6012 120 5.0

MCH-6008 208 2.9

MCH-6024 240 600 2048 2.5

MCH-6027 277 2.2

MCH-7512 120 6.2

MCH-7508 208 3.6

MCH-7524 240 750 2560 3.1

MCH-7527 277 2.7

MCH-9012 120 7.5

MCH-900B 208 4.3

MCH-9024 240 900 3072 3.7

MCH-9027 277 3.2

MCH-10512 120 8.8

MCH-10508 208 5.0

MCH-10524 240 1050 3584 4.4

MCH-10527 277 3.8

MCH-12012 120 10.0

MCH·12008 208 5.8

MCH·12024 240 1200 4096 5.0

MCH-12027 277 4.3

MCH·1500B 208 7.2

MCH·15024 240 1500 5102 6.2

MCH·15027 277 5.4

MCH-1800B 208 8.7

MCH-18024 240 1800 6143 7.5

MCH-18027 277 6.5

ACCESSORIES

34

47

59

71

83

94

1181/4

132

11

Trans Energy Systems

1480 Renaissance Drive Suite 210

Park Ridge, Illinois 60068 847-699-9595

info@transenergysystems.com www.transenergysystems.com