Training Schedule2018Measurement Solutions Systems and Service Schools

TechnipFMC13460 Lockwood Rd.Bldg. S01Houston, Texas 77044 USAP: +1 281.591.4200

USA Operation1602 Wagner Ave.Erie, PA 16510 USAP: +1 814.898.5000

© TechnipFMC 2018

FMSM025 Issue/Rev. 0.2 (1/18)

3

Welcome

Welcome to TechnipFMC

We believe in supporting our clients and ensuring their ongoing business successes. TechnipFMC provides comprehensive training for customers worldwide. Our training schools reflect the experience and knowledge gained working nearly 100 years in the oil and gas industry.

The courses are taught by the same measurement specialists that design, engineer and service our equipment. We offer you and your employees a superior training environment that will assist you with safe, reliable and efficient system operation. The training workshops use our demonstration equipment and simulators to provide an in-depth, hands-on experience. Our training courses offer students valuable knowledge and practical expertise that allow students to autonomously install, parameterize, maintain and repair your system.

TechnipFMC also offers customized courses either at your place of business, a TechnipFMC training location, or a location of your choice. We look forward to sharing our knowledge and experience with you at our training seminars.

If you require other training services, please do not hesitate to contact us.

At a Glance

` AccuLoad® III Page 3 April 3-6, 2018 Houston, TX USA June 12-15, 2018 Erie, PA USA

` AccuLoad® III Load Rack Page 5 March 13-16, 2018 Erie, PA USA September 11-14, 2018 Houston, TX USA October 9-12, 2018 Erie, PA USA

` Liquid Measurement Fundamentals Page 7 April 10-13, 2018 Houston, TX USA November 13-16, 2018 Bakersfield, CA USA

` General Measurement 101 Page 9 July 17-20, 2018 Erie, PA USA TechnipFMC Liquid Metering Technologies Page 11 August 7-10, 2018 Erie, PA USA

` Fiscal Gas Measurement Page 13 August 14-17, 2018 Houston, TX USA

Contents

`

`

`

`

`

`

1 TechnipFMC Training Schedule 2018 2

Smith Meter® AccuLoad III®

3 TechnipFMC Training Schedule 2018 4

Dates and locations April 3-6, 2018 – Houston, TX USA June 12-15, 2018 – Erie, PA USA

Prerequisites Basic metering knowledge and familiarity with load rack/batching operations.

Overview This course combines theory, hands-on training and live demonstrations that provide an understanding of how AccuLoad® electronic load controllers interface into the load rack metering system.

Topics covered• General operation

• Programming function

• Installation guidelines

• Service and diagnostics

• Communication functions

• Security features

• Additive injector interface

• Auto proving for provers

• Blending methods and programming (SEQ, ratio and hybrid)

• Pulse transmitters

• AccuMate® software application

• Smith Meter® AccuLoad® IV overview, hardware and features

Tuesday 0800 - 1600

Wednesday 0800 - 1600

Thursday 0800 - 1600

Friday 0800 - 1100

Schedule

Order Form

Click here for

5 TechnipFMC Training Schedule 2018 6

Smith Meter® AccuLoad® III Load RackDates and locations March 13-16, 2018 – Erie, PA USA September 11-14, 2018 – Houston, TX USA October 9-12, 2018 – Erie, PA USA

Overview This course combines theory, hands-on training and flow demonstrations that students can readily use in the field to install, operate, calibrate, maintain and troubleshoot TechnipFMC’s load rack products.

Topics covered• General operation

• Programming function

• Installation guidelines

• Smith Meter® PD and Prime4 meters

• Meter service

• Pulse transmitters

• Load rack accessories

• Smith Meter® 210 digital control valves

• Turbine meters for load rack service

• Also provided is an overview of the Smith Meter® AccuLoad® III including installation, operation, programming, blending, service and metered injectors

• Smith Meter® AccuLoad® IV overview, hardware and features

Tuesday 0800 - 1600

Wednesday 0800 - 1600

Thursday 0800 - 1600

Friday 0800 - 1100

Schedule

Order Form

Click here for

7 TechnipFMC Training Schedule 2018 8

Liquid MeasurementFundamentalsDates and locations April 10-13, 2018 – Houston, TX USA November 13-16, 2018 – Bakersfield, CA USA

Overview This course combines theory and practical training to teach skills that students can immediately use in the field verifying accuracies, monitoring process conditions and troubleshooting errors in measurement.

Topics covered• Fluid dynamics

• Metering technologies

• General metering system design

• Prover design and troubleshooting

• Typical control systems

• Basic flow computer design

• Oil sampling techniques

• Liquid flow calculations

• Measurement uncertainties

Tuesday 0800 - 1600

Wednesday 0800 - 1600

Thursday 0800 - 1600

Friday 0800 - 1100

Schedule

Order Form

Click here for

9 TechnipFMC Training Schedule 2018 10

General Measurement 101Dates and locations July 17-20, 2018 – Erie, PA USA

Overview This course covers the basic knowledge for engineers and technicians just entering the oil and gas industry.

Topics covered• Flow theory

• Units of measure

• Field transmitters

• Typical control systems

• Basics of product sampling

• Measurement uncertainties

Tuesday 0800 - 1600

Wednesday 0800 - 1600

Thursday 0800 - 1600

Friday 0800 - 1100

Schedule

Order Form

Click here for

11 TechnipFMC Training Schedule 2018 12

TechnipFMC Liquid Metering TechnologiesDates and locations August 7-10, 2018 – Erie, PA USA

Overview This course combines theory and hands-on training to teach skills that students can immediately use in the field to install, operate, calibrate, maintain and troubleshoot TechnipFMC Measurement Solutions metering products.

Topics covered• Smith Meter® PD meters

• Conventional turbine meters

• Multiple viscosity turbine meters

• Pipeline accessories

• PD stack accessories

• Introduction to AccuLoad® and microFlow.net™

• Coriolis meters

• Ultrasonic meters

• Proving and proving methods

Tuesday 0800 - 1600

Wednesday 0800 - 1600

Thursday 0800 - 1600

Friday 0800 - 1100

Schedule

Order Form

Click here for

13 TechnipFMC Training Schedule 2018 14

Fiscal GasMeasurementDates and locations August 14-17, 2018 – Houston, TX USA

Overview This course combines theory and practical training to teach skills that students can immediately use in the field verifying accuracies, monitoring process conditions and troubleshooting errors in measurement.

Topics covered• Fluid dynamics

• Metering technologies

• Gas calculations

• Typical control systems

• Field analytical equipment

• Basic flow computer design

• Measurement uncertainties

Tuesday 0800 - 1600

Wednesday 0800 - 1600

Thursday 0800 - 1600

Friday 0800 - 1100

Schedule

Order Form

Click here for