Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5...
Transcript of Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5...
![Page 1: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/1.jpg)
Training Manual 00141915 Aug 2000
2.5-1
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Y
Z
XMonte Carlo
Response Surface
Probabilistic Design: Bringing FEA closer to REALITY!
2.5 Probabilistic Design
Exploring randomness and scatter reveals a simple truth: It’s a part of reality - everywhere!
![Page 2: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/2.jpg)
Training Manual 00141915 Aug 2000
2.5-2
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
Introduction
• Probabilistic Design takes into account uncertainties (scatter) in input data and performs multiple runs to calculate scatter in output data.
– Recognises the fact that input parameters do vary despite the best intentions.
– Predicts variation in design performance.
– Allows design for reliability.
![Page 3: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/3.jpg)
Training Manual 00141915 Aug 2000
2.5-3
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
… Introduction
InputInputInputInput ANSYSANSYSANSYSANSYS OutputOutputOutputOutput
• Material properties• Geometry• Boundary Conditions
• Deformation• Stresses, strains• Fatigue, creep,...
It’s a reality that input parameters are subjected to scatter => automatically the
output parameters are uncertain as well!!
![Page 4: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/4.jpg)
Training Manual 00141915 Aug 2000
2.5-4
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
ANSYS PDSANSYS PDSANSYS PDSANSYS PDS
Probabilistic Design
… Introduction
• Typical questions answered with probabilistic design:
– How large is the scatter of the output parameters?
– What is the probability that output parameters do not fulfil design criteria (failure probability)?
– How much does the scatter of the input parameters contribute to the scatter of the output (sensitivities)?
![Page 5: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/5.jpg)
Training Manual 00141915 Aug 2000
2.5-5
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Random InputVariables
Random OutputParameters
Finite-ElementModel
Material• Strength• Material
Properties
BC's• Gaps• Fixation
Geometry/Tolerances
Loads• Thermal• Structural
• LCF lifetime• Creep lifetime• Corrosion lifetime• Fracture mechanical lifetime• …
Probabilistic Design
… Introduction
• The goal is to design more reliable products by estimating a component's lifetime.
![Page 6: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/6.jpg)
Training Manual 00141915 Aug 2000
2.5-6
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
… Introduction
• Probabilistic Design System (PDS) is useful in several industries and applications, e.g:
– Aerospace
– Gas Turbines (Rotating Machinery)
– Automotive (Power Train)
![Page 7: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/7.jpg)
Training Manual 00141915 Aug 2000
2.5-7
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
… Introduction
Deterministic Analysis
• Only provides a YES/NO answer.
• Safety margins are piled up “blindly” (worst material, maximum load, … worst case). Leads to costly over-design.
• Only “as planned,” “as is,” or the worst design.
• Sensitivities do not take interactions between input variables into account (second order cross terms).
Probabilistic Analysis
• Provides a probability and reliability (design for reliability).
• Takes uncertainties into account in a realistic fashion.
– Closer to reality– Over-design is avoided
• “Tolerance stack-up” taken into account
• Range/width of scatter is “built-in” into probabilistic sensitivities.
• Inherently takes into account interactions between input variables.
![Page 8: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/8.jpg)
Training Manual 00141915 Aug 2000
2.5-8
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
PDS Features
• Works with any ANSYS model.
– Static, dynamic, linear, non-linear, thermal, Structural, Electro-magnetic, CFD …
• Allows large number random input and output parameters (max. total = input plus output is 5000).
• Ten statistical distributions for input parameters.
• Random input parameters can be correlated.
• Probabilistic methods:
– Monte Carlo - Direct & Latin Hypercube Sampling
– Response Surface - Central Composite & Box-Behnken Designs
![Page 9: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/9.jpg)
Training Manual 00141915 Aug 2000
2.5-9
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
… PDS Features
• Comprehensive probabilistic results, e.g:
– Convergence plots
– Histogram
– Probabilities
– Scatter plots
– Sensitivities
• State-of-the art statistical procedures to analyze and visualize probabilistic results
• Use of distributed, parallel computing techniques for drastically reduced wall clock time of the analysis
![Page 10: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/10.jpg)
Training Manual 00141915 Aug 2000
2.5-10
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
GUI for PDS
• PDS menus are organized according to sequence of use, similar to design optimization menu:
– Start by creating a loop file of any analysis
– Define the problem
– Specify methods and run options
– Fit response surfaces
– Postprocessing
– Database handling
![Page 11: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/11.jpg)
Training Manual 00141915 Aug 2000
2.5-11
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
PDS Results
• Different types of results displays are available to answer typical PDS questions:
– Statistics, histogram, sample diagrams• These plots can be used to answer the question "How large is
the scatter of the output parameters?"
– Cumulative distribution function, probabilities• "What is the probability that output parameters do not fulfil
design criteria (failure probability)?"
– Sensitivities, scatter diagram, response surface• "How much does the scatter of the input parameters
contribute to the scatter of the output?"
![Page 12: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/12.jpg)
Training Manual 00141915 Aug 2000
2.5-12
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Simulation Value Sample Plot:
Probabilistic Design
Probabilistic Results
![Page 13: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/13.jpg)
Training Manual 00141915 Aug 2000
2.5-13
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Mean Value Sample Plot
Probabilistic Design
Probabilistic Results
![Page 14: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/14.jpg)
Training Manual 00141915 Aug 2000
2.5-14
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Standard Deviation Sample Plot:
Probabilistic Design
Probabilistic Results
![Page 15: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/15.jpg)
Training Manual 00141915 Aug 2000
2.5-15
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Histogram Plot:
Probabilistic Design
Probabilistic Results
For random input variables For random output parameters
![Page 16: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/16.jpg)
Training Manual 00141915 Aug 2000
2.5-16
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Cumulative Distribution Function:
Probabilistic Design
Probabilistic Results
![Page 17: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/17.jpg)
Training Manual 00141915 Aug 2000
2.5-17
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Sensitivities:
Probabilistic Design
Probabilistic Results
Note:Sensitivity plot for• Spearman rank
order correlation coefficient
• Linear correlation coefficient
• Single parameter Sensitivity study
![Page 18: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/18.jpg)
Training Manual 00141915 Aug 2000
2.5-18
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7
Scatter Plot:
Probabilistic Design
Probabilistic Results
![Page 19: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/19.jpg)
Training Manual 00141915 Aug 2000
2.5-19
NEW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7N
EW
FEA
TU
RES 5
.7Probabilistic Design
Summary
• Probabilistic Design is a new feature at ANSYS 5.7
• An easy-to-use tool for realistic prediction of reliability
• Based on widely accepted Monte Carlo simulation technique and Response Surface methods
• Allows for parallel / distributed processing of jobs
![Page 20: Training Manual 001419 15 Aug 2000 2.5-1 Probabilistic Design: Bringing FEA closer to REALITY! 2.5 Probabilistic Design Exploring randomness and scatter.](https://reader030.fdocuments.us/reader030/viewer/2022032723/56649cfa5503460f949cbe5b/html5/thumbnails/20.jpg)