Training Catalogue 2012
Transcript of Training Catalogue 2012
-
7/30/2019 Training Catalogue 2012
1/76
Training Coursescatalogue >> 2012
-
7/30/2019 Training Catalogue 2012
2/76
2
Using this catalogueThis catalogue oers more than just an overview o Schneider Electrics scheduled automation trainingcourses and workshops; it also contains valuable inormation and suggestions on:
Recommended learning paths Minimum prerequisite knowledge
Objectives o each course Topics covered Intended audience Length o course
In addition, each o our courses and workshops are grouped into categories and include a traininglegend to provide a quick visual overview o the essential skills and knowledge targeted or each courseincluding the type, structure, level and ocus o each training course.
Indicates a required module o our PlantStruxureTM
certication program that provides expertiseacrossthe breadth o Schneider Electric solutions
Indicates a required module or our SCADACertication program; recognising those withextensive advanced experience integratingSchneider Electric SCADA solutions
Specialised workshops delivered by ourtechnical and solution specialists (availableon request)
Course structure broken down into percentage practical and theory
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
Course complexity or competency level. We recommend that youundertake the necessary prerequisite courses prior to attending
Course objective and ocus. Larger arrows indicate primary ocus,while smaller arrows indicate that some time will be spent exploringthis aspect during the course
PlantStruxureTM (SoCollaborative)
PlantStruxureTM is a collaborative system that allowsindustrial and inrastructure companies to meet theirautomation needs and at the same time deliver on growingenergy management requirements
Saety andSystem Tools
Networks andcommunication
Control
Sotware andvisualisation
Course type
Course structure and level
Course focus
MachineStruxureTM (SoMachine)
MachineStruxureTM is a preerred architecturalimplementation that has been tested, validated anddocumented to provide fexibility and optimisation using asingle sotware solution or our hardware control platorms
Saety andSystem Tools
Networks andcommunication
Control
Sotware andvisualisation
Course ocuses on Electrical Energy andPower concepts
Course ocuses on topics relevant to theBuilding industry
Scheduled, in-class, instructor-led training
courses, conducted at one o our trainingacilities (capital cities and key regional centres)
ASQA Accredited Course in collaborationwith SkillsTech as RTO or assessment andCerticate o Attainment
Indicates a module based on a mature productthat is typically only scheduled On Demand
-
7/30/2019 Training Catalogue 2012
3/76
3
IndexSchneider Electric and Education 4
Automation Training Services 5
Curriculum Map 6
A Complete Range of Training Services 10Instructor-led Training, Workshops, Custom On-site Training, Sel-PacedTraining, Online Training, Academic Program, Educational Equipment,Training Partners
Software and Visualisation Courses 14Ampla Perormance, Ampla Advanced Conguration and System Design,Cicode Programming, CitectHistorian/ Vijeo Historian Conguration,CitectSCADA/ Vijeo Citect Conguration, CitectSCADA/ Vijeo CitectCustomisation and Design, CitectSCADA/ Vijeo Citect Upgrade, MDTAutoSave Administrator Training, Vijeo Designer Sotware (HMI): An
Introduction to Human Machine Interace, Vijeo Designer Sotware (HMI):Advanced Human Machine Interace, Web Designer and ETG3000Gateway Services
Networks and Communication Courses 26Advantys Congurator STB Distributed I/O, CitectSCADA/ Vijeo CitectArchitecture and Redundancy, CitectSCADA/ Vijeo Citect Diagnostics andTroubleshooting, CT1 - Ethernet Basics, CT2 - Network Inrastructure, CN1- ConneXium Product Conguration (TCSESM and TCSESM-E), ConneXiumWiFi Switches, High Availability Ethernet Networking and Redundancy,Industrial Communication, Industrial Communication ASi or Legacy,Introduction to Instrumentation and Process Control (HART)
Safety and System Tools Courses 38Application o Standard Libraries, Saety Fundamentals, Quantum SIL3Saety Implementation, Saety PLC Programming (Preventa XPS-MF), UnityApplication Generator (UAG) Sotware
PLC Courses 44Advantys Congurator STB Distributed I/O, Concept Maintenance, ConceptProgramming, Introduction to Instrumentation and Process Control (HART),PL7 Pro Programming and Maintenance, SoMachine Conguration, QuantumEthernet Remote I/O, Unity Pro Programming, 984 Ladder Logic - Level 1, 984Ladder Logic - Level 2, LL984 Editor or Unity or Quantum and M340 PLCs
Telemetry Courses 56
ClearSCADA Conguration, ClearSCADA Advanced Conguration,ClearSCADA Create and Congure Crystal Reports, E Series RTUConguration and Programming, Trio Radio Modem Product Conguration,Understanding DNP3 Protocol, DNP3 and Telemetry Fundamentals withM340 RTU
Drives, Motor Control and Power Quality Courses 64Correcting Harmonics and Power Quality Disturbances, HVAC Drive Systems,Intelligent Motor Control Centres (iMCC - TeSysT/U), Variable Speed DrivesCommunication, PowerLogic SCADA, Practical Aspects to Motor Control andDrives, SoMachine Conguration
Further information 72
Certied Education Centres, General Terms and Conditions or Training, CourseBooking Form
-
7/30/2019 Training Catalogue 2012
4/76
Vijeo Citectservers
Engineering
ERP System
High Availability
Ethernet
Infrastructure Process Safety
Modicon STBDistributed IO
Altivar VariableSpeed Drive
Tesys TMotor Starter
ModiconController
Magelis HMIPlant Floor
Remote IO
TeSyS UMotorProtection
Powerlogic PM800Power Meter
MotorSys IPMCC
Smart instrumentation
ModiconHot-StandbyController
Remote IO
Modicon STBDistributed IO
PreventaSafetyController
Modicon M258Logic ControllerCANopen
Tesys TMotor Starter
LexiumIntegratedServo Drive
Modicon TMDistributed IO
LexiumServo Drive
Altivar VariableSpeed Drive
ProcessMachine
MachineHMI
SoCollaborativeSoftware
Operating & MonitoringSoCollaborative
SoftwareSoCollaborative
SoftwareSoCollaborative
Software
MESSoCollaborative
Software
BatchSoCollaborative
Software
Historian & ReportingSoCollaborative
Software
SoCollaborativeEngineeringSoftware
ControlUnityPro
VisualisationVijeoCitect
Web servicesWeb Designer
System DesignUAG/sg2
CommunicationOPCFactoryServer
or
DrivesController
DrivesController
MotionController
HMIController
Modicon
ModiconQuantum SIL3Safety Controller
Remote Site
Remote IO
Smart instrumentation
4
Schneider Electric and
Education
Together, we build a future for young peopleOur background in the industrial and commercial sectors and our close collaboration with theeducational world (teachers, students, school boards, school inspectors) show our willingness to sharea global vision o techniques and technologies in the rapidly evolving world o electricity with technical,secondary and higher education.
Our social responsibilityWe are committed to advancing the successul integration and training o young people. These actionsare undertaken in many countries in which Schneider Electric is present and then relayed throughout theworld, principally through its oundation.
Training solutionsSchneider Electrics training solutions are continually evolving to ensure that they consistently deliveroutstanding results. To make it easier or you, our automation training curriculum is now aligned to thePlantStruxureTM topography, with courses covering sotware and visualisation, control, networks andcommunications and saety and system tools.
-
7/30/2019 Training Catalogue 2012
5/76
Automation Training
Services
Today, automation expertise is usually gained over years ofexperience on the job, with a significant time lag from hire date
to useful productivity. However, acquiring the necessary technical
skills through training ensures self-sufficiency; with many flow-on
benefits, including: reduced downtime, increased safety and
productivity and improved bottom line.
Improving and educating our uture workorce is everyones responsibility. At Schneider Electric weare committed to providing you with comprehensive knowledge o our products through high quality,interactive education that can immediately be applied in your workplace or institution.
Schneider Electrics instructor-led courses are designed to empower your engineering and technicalworkorce with new skills. Automation Training courses and programs provide hands-on experience,leaving students eeling condent enough to design and congure their own systems and applicationsusing Schneider Electric products and solutions.
Schneider Electrics educational methodology has been proven eective through thousands ohours o instruction. Feedback received rom customers conrms our success and drives continuousdevelopment o our training curriculum. With a team o qualied in-house product trainers in each state,backed up by technical and solution specialists with domain knowledge expertise, Schneider Electricseducational program delivers the training solutions required in your business.
Our training services include online, standard in-class and customised training sessions. SchneiderElectric courses are designed to teach undamental, theoretical and practical knowledge aboutour products, systems and the application o technology. There is a strong emphasis on increasingyour productivity and helping you better manage your liecycle costs, enabling you to maintain yourcompetitive advantage.
We oer a broad curriculum that can be tailored to meet your specic requirements. This allows us toadapt training according to your existing projects and create manuals specic to your needs. Whetherits alignment with your shit requirements, expansion projects or legacy migration strategies, SchneiderElectric has the educational services you require.
For more inormation on Automation Training courses or schedules call 1300 369 233or visit:
www.schneider-electric.com.au/training
5
-
7/30/2019 Training Catalogue 2012
6/76
MDT
Admin istra torTraining
2 days
Vijeo
DesignerIntroduction
1 day
Software and Visualisation Network & Com
Pre-Sales
Qualication
Introduction to Industrial
System Design Engineer System Design Engineer
IT Admin/BusinessSystems Engineer
IT Admin/BSE.
Plant Operator
Maintenance Engineer Maintenance Engineer
3 days
Vijeo
DesignerAdvanced
1 day
PlantStruxure certification courses
SCADA certification courses
SCADA
Conguration
CicodeProgramming
2 days
SCADA
Customisationand Design
2 days
CitectSCADA/ Vijeo Citect Overview (online)
SCADA
Archi tecture andRedundancy
2 days
SCADA
Diagnostics andTroubleshooting
1 day
Historian
3 days
Ampla
Perormance
2 days
Ampla
AdvancedPerormance
2 days
MES certification courses
Safety certification courses
Industry trainingAutomation and control learning path
6
-
7/30/2019 Training Catalogue 2012
7/76
Practical
Aspects toMotor Control
and Drives
2 days
IMCC HVAC Comms Harmonics
1 day add-on
cation
Network (online)
System Design Engineer
PlantOperator
Maint.Engineer
Maintenance Engineer
Saety
Fundamentals
2 days
Control Safety and System Tools
UAG
3 days
Introduction toInstrumentation
and ProcessControl (HART)
2 days
Unity Pro
Programming(with/without
hardware)
3/4 days
Industrial
Communication
3 days
High Availability
EthernetNetworking and
Redundancy
3 days
ConneXium
WiFi Switches
1 day add-on
Quantum
Ethernet RIO Advantys
Congurator
1 day add-on
LL984 editoror Unity or
Quantum andM430 PLCs
1 day add-on
Introduction to IndustrialAutomation (online)
Quantum
SIL3 SaetyImplementation
3 days
Discover
Motor Control
SaetyEssentials
(online)
7
-
7/30/2019 Training Catalogue 2012
8/76
Safety certification courses
Practical
Aspects toMotor Control
and Drives
2 days
HMI
System Design Engineer
Maintenance Engineer
Control Safety and System Tools
Low End
Control (LEC)Conguration- Twido/Zelio -
3 days
SoMachine
Conguration
3 days
Vijeo
DesignerIntroduction
1 day
Vijeo
DesignerAdvanced
1 day
SoHVAC
Parameterisation
2 days
TVDA:
Hoisting Packaging Conveying
Custom
Original Equipment Manufacturer (OEM)
ContractorContractor
IMC TVDA:
Pumping Hoisting Lits
Custom
Telemetry (TRSS) certification courses
Introduction to IndustrialAutomation (online)
Discover
Motor Control
Saety
Fundamentals
2 days
Saety PLC(PreventaXPS-MF)
3 days
SaetyEssentials
(online)
8
Industry trainingTraining learning path for OEMs
-
7/30/2019 Training Catalogue 2012
9/76
System Design Engineer
Maintenance Engineer
Plant Operator
IT Admin/Business Systems Engineer
Trio Radios
Wireless RadioModems
2/3 days*
AccutechWireless
Instrumentation
custom*
M340 RTU
ModuleConguration(Unity Pre-req)
1 day*
IEC-61131-3
SCADAPackRTU
Conguration
3 days*
ClearSCADAAdvanced(OLE / SQL)
2 days*
Crystal Reports
Create andCongure
2 days*
RTUsSCADA Connectivity
Maint.Engineer
PlantOperator
IT Admin/BSE.
DNP-3 Protocol
Introduction toDNP-3
2 day*
ClearSCADA
Conguration
4 days*
9
Learning path for Telemetry
-
7/30/2019 Training Catalogue 2012
10/76
0
A Complete Range
of Training Services
Schneider Electric Australia offers a suite of Educational Servicesdesigned for end users, engineers, system integrators, equipment
manufacturers, panel builders and educational establishments.
Our courses and programs provide you with hands-on experience,
leaving you feeling confident enough to design and configure your
own systems and applications using Schneider Electric products
and solutions.
Instructor-led Training
Schneider Electrics Educational Services provides multi-levelcourses or end users, engineers and system integrators.All authorised courses have a limited number o attendeesto ensure participating students get the most out o eachcourse and access to an experienced Instructor. Each studentis allocated with a PC which is pre-congured with relevantapplications and other sotware needed throughout the course.
WorkshopsWe also oer a number o specialised workshops delivered byour technical and solution specialists. These workshops canbe delivered at one o our local oces or on-site. Due to the
specialist nature o these workshops they are availableon request.
Custom On-site TrainingOur Schneider Electric Certied Instructors can deliver any oour listed courses on-site at your acility. In addition, we alsooer Site Specic Courses where you can include modulesrelevant to your organisation rom any o our existing trainingcourses. For certication purposes, an exam invigilationservice can also be provided on-site. You should discuss yourrequirements with your local Educational Services Managerand see how this might best be accomplished.
Self-Paced TrainingThe SCADA curriculum o instructor-led courses is alsoavailable as Sel-Paced Education Kits. This means you canstudy the material in your own time and at your own pace.These kits include all the materials you would receive i youattended an instructor-led course. The manuals are easy toollow and include exercises throughout to ensure you becomeamiliar with the practical application o SCADA solutions.
Online TrainingOur online education modules are designed to provide
students with the entry level undamentals required or ourbroader industrial automation topics. These ree modules actas both a primer or urther instructor-led In-Class TrainingCourses, as well as developing knowledge and expertise oranyone involved in the liecycle support o Schneider Electricsautomation and control equipment.
Academic Program
The Academic Program is designed to enable universities,technical colleges and tertiary training centers the ability toget the most out o their sotware investment. This is achievedby providing students and aculties with access to the industrialautomation sotware and courseware or a nominal ee. Thisprogram provides support or the registered aculty, which isa 12 hours a day, 5 days a week technical support service.Signicant benets or the institution, the instructor and thestudent makes this program exceptional value.
Educational EquipmentTo support our Academic Program, we oer a complete
catalogue o Schneider Electric Educational Equipment.For more inormation or to obtain a copy o theEducational Equipment catalogue contact your local oce
on 1300 369 233 or visit
www.schneider-electric.com.au/training.
Training PartnersDelivering on our promise to make energy sae, reliable,ecient, productive and green, Schneider Electric leveragetraining partners to provide your sta with experientialworkshops that support our automation training curriculum.Training partners include the ollowing:
Hirschmann via RMIT University Edith Cowan University SkillsTech Australia SolidQ Security Inrastructure Solutions University o Sydney School o Chemical
and Biomolecular Engineering
-
7/30/2019 Training Catalogue 2012
11/76
11
Certified Training ProgramsIt can be dicult to compare the skills o one person to another, particularly when hiring new sta.Whilst university degrees indicate what an applicant is capable o, it does not measure an applicantsskills with regards to designing and implementing industrial applications.
Schneider Electrics certication programs address this issue. Much like any educational environment,participants in our certication programs will attend classes, study, sit exams and progressively earnrecognition in key components o industrial automation.
We currently oer two types o certication:
SCADA certificationProvides a structured ramework ensuring engineers have extensive experienceintegrating Schneider Electric SCADA solutions using CitectSCADA or Vijeo Citect.
PlantStruxureTM certificationCerties technical experts in a wide range o subjects covering the breadth o our evolvingPlantStruxure oer; including networking and architecture, PLC and SCADA platorms,as well as Schneider Electric engineering tools.
SCADA Certification ProgramThe SCADA certication program distinguishes and recognises engineers who have demonstratedtheir advanced expertise in the integration o Schneider Electrics SCADA sotware solutions.
At the heart o the CEP are the SCE (SCADA Certied Engineer) exams, which provide a means otesting experienced systems engineers. They encompass tests or both CitectSCADA/ Vijeo Citectknowledge as well as a range o related topics, such as PLC communications, Microsot WindowsOS and networking.
The CitectSCADA Certied Proessional (CSCP) and Vijeo Citect Certied Proessional (VCCP)qualications are introductory certications which can be achieved as the rst stage o the ull CEPqualication. The CSCP will be awarded to those CEP candidates who achieve a pass on the currentversion conguration exam.
To obtain certication, students must pass the exam or each o the corresponding modules o theSCADA Certied Engineer Program (CEP):
Module 1: Conguration Module 2: Cicode
Module 3:Architecture and Redundancy Module 4: Customisation and Design Module 5: Diagnostics and Troubleshooting
The SCADA certication program is open to all customers, end users and partners.
1
2
3
4
5
Networks andArchitecture
Unity Pro andPAC Platform
SCADA Engineering Tools(UAG or sg2)
PlantStruxureTM
Certified Engineer
Level of expertise
SCADA
Certified
Engineer
Completed
eduCational
ServiCeS
Thisisto certify that
Fiona Straton
hassuccessfully completedthe
Citect SCADA/VijeoCitect
Configuration Training Course
AuthorisedBy
Lyle vanderVeer
National SupportandTraining Manager
On a successful pass of
either the CitectSCADA or
Vijeo Citect configuration
exam, students receive
a pass certificate and
the introductory CSCP
qualification.
-
7/30/2019 Training Catalogue 2012
12/76
12
PlantStruxure Certification ProgramThe PlantStruxure CEP (Certied Engineer Program) distinguishes and recognises engineers skilledin the integration o Schneider Electric technology based automation projects.
With the certication, Schneider Electric acknowledges to the market that the PlantStruxure CertiedEngineer masters the Schneider Electric system oer/ technology. The engineer should thereore becapable, to implement a given solution/application in the best possible way using Schneider Electrictechnology. Currently, the PlantStruxure Certied Engineer Program is available only to employees
o active Schneider Electric Alliance partners.
The PlantStruxure certication is issued to engineers who have successully demonstrated theirexpertise by passing an exam or each o the our key modules:
Module 1: Schneider Electric Architectures and Networking Module 2: Unity Pro and PAC Platorms Module 3:Vijeo Citect - SCADA Platorm Module 4: Engineering Tools Module 5: Connexium (external Prometric exam or RPL* rom Hirschmann)
Modules 1 through 3 are mandatory and passing grades on each module are required to be eligible orcertication. Module 4 contains two sub modules - one or UAG and one or sg2. A passing grade ononly one o these two modules is sucient to be eligible or certication. A candidate can choose to
take either one or both o these. No additional credit is given to candidates passing both sub modules.Module 5 is a planned Industrial Ethernet extension to the PlantStruxure CEP in 2012, and will bemandatory or both new and existing PlantStruxure certied engineers, requiring an external exam.
The PlantStruxure CEP is exclusively accessible to Schneider Electric Alliance partners.
Module 1
Module 2
Module 3
Module 4a
Module 4b
or
Architectures and Networking
Unity Pro and PAC Platforms
Vijeo Citect - SCADA Platform
UAG (Unity Application Generator)
sg2
Engineering Tools
Schneider Electric PlantStruxureTM
Certified Engineer Program Launched in 2010 (Wave 1)
Module 1
Schneider Electric PlantStruxureTM
Certified Engineer Program planned for 2012 (Wave 2)
Architectures and Networking
Module 2 Unity Pro and PAC Platforms
Module 3 Vijeo Citect - SCADA Platform
Module 4 UAG (Unity Application Generator)
Module 5 Connexium CT1, CT2 and CN1
* RPL - recognition or prior learning
What is the PlantStruxure
Certification Program?
The PlantStruxure
Certification Program
is designed to test anengineers knowledge
of Schneider Electrics
preferred systems and
architectures. The
PlantStruxure Certified
Engineer (PCE) status is
awarded to engineers who
pass four exams designed
specifically to test this
knowledge.
-
7/30/2019 Training Catalogue 2012
13/76
Industrial Ethernet Certication: Reer Courses CT1, CT2 and CN1 to be added in 2012.
Modicon PLCs and Unity
ERIO and Advantys IOs
Vijeo Citect SCADA
Magelis HMI
Altivar Drives
Tesys Motor Starter
Sg2 Engineering Soft
UAG Engineering Soft
1 2 3 4 5
5
4
3
2
1
Expert
Advanced
Competent
Basic
Novice
3
3
3
3
2
2
1
1
13
PlantStruxure Certification ProgramThe PlantStruxure CEP is at the heart o the Schneider Electric Alliance Partnership Policy:Maintaining a minimum number o PlantStruxure Certied Engineers is one o the prerequisites or aSchneider Electric Alliance Partner Company to reach the PlantStruxure Certied Alliance Partner Status.
As an employee o an Alliance Partner please contact your local Schneider Electric Alliance PartnerManager to sign up or a certication exam or or any question related to the PlantStruxure exam or theSchneider Electric Alliance Program.
Recommended competency prole or Alliance Partner employees planning to register or thePlantStruxure CEP exams:
In 2012, we plan to train, examine, and promote extended competency in the ollowing areas:
Telemetry and Remote SCADA Solutions: TRSS exams with RPL oered to ormer CMI Partners
Energy Management Information Systems: EMIS exams based on PowerLogic SCADA withRPL required or IEC-61850 protocol and IED conguration
Manufacturing Execution Systems: MES exams based on Ampla, Vijeo Historian with RPLrequired or SQL and SSRS
Safety Systems: Attendance at our Saety PLC Courses or Certied Functional Saety Proessionals;
1. Machine Functional Saety: RPL required or IEC-62061 / ISO-13849 and Sistema (SaetyFundamentals Course)
2. Process Functional Saety: RPL required or Certied Functional Saety Engineers (ISA-S84 orTUV), IEC-61508 / IEC-61511, SIL Calculation
PSX Certified Engineers Alliance Certified Partner (#) Advanced PSX Certifications
PSX CerticationCore Knowledge
Engineering Tools (UAG/sg2)
PLC & RIO Legacy*
SCADA HMI*
Networking Drives*
PlantStructure CertiedAlliance integration
partner with
TRSScertied
EMIScertied
MEScertied
Safetycertied
PlantStructure Certified Alliance partner
* Optional competencies - not certied
-
7/30/2019 Training Catalogue 2012
14/76
Software and
Visualisation
Courses
10
Software and
Visualisation
Courses
14
-
7/30/2019 Training Catalogue 2012
15/76
Ampla PerformanceTwo-day Instructor-led Course
Course DescriptionThe Ampla Perormance training program introduces new Ampla users to thebasic concepts and methods involved in conguring and using Ampla Studioand Production Analyst to model perormance.
An additional one-day case study is optional.
DurationTwo-day instructor-led course, with lunch provided.
Audience
IT Admin and Business System Engineers who use Ampla
Precursors It is essential that students are amiliar with Microsot
Windows operating systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
Ampla Performance Course Outline
Day 1 of 2
The rst day introduces participants to theramework o Ampla and covers the ollowingtopics:
Design Speciications Managing Projects Hierarchies Security
Reporting Points Production Module
Day 2 of 2
On the second day, participants congure aperormance solution or the case study introducedon day one. This entails the ollowing topics:
Downtime Module Metrics Module Production Analyst Web Client
Part number: SAUTR1208
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
15
-
7/30/2019 Training Catalogue 2012
16/76
Ampla AdvancedConfiguration and System DesignTwo-day Instructor-led Course
Course DescriptionThe Ampla Advanced Conguration training program introduces heavy-dutyAmpla users (those responsible or conguration, integration and troubleshooting,or example) to the most important conguration tasks they are likely to need in theirday-to-day work. Each topic is discussed in the context o practical scenarios, withhands-on examples built in wherever this is easible.
DurationTwo-day instructor-led course, with lunch provided.
Audience Experienced Ampla usersAmpla ConigurersAmpla Integrators
Precursors Students must have attended the Ampla Perormance
(SAUTR1208) course It is essential that students are amiliar with Microsot
Windows operating systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
Ampla Advanced Configuration Course Outline
Day 1 of 2
The rst day introduces participants to Amplaconguration concepts and techniques relatingto ISA95 modelling standards. Specic topicscovered on this day include:
Models Templates Master Data Synchronisation
Day 2 of 2
The second day introduces participants to theollowing advanced conguration techniques:
Web Services Reporting Stores Procedure Code Items Diagnostics
16
Part number: SAUTR1209
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
17/76
Cicode ProgrammingTwo-day Instructor-led Course
Course DescriptionLearn basic programming techniques using the Cicode programming language in thishands-on interactive course. The course is aimed at users who have had no programmingexperience. It is also useul or experienced users who wish to become amiliar with Cicode.
DurationTwo-day instructor-led course, with lunch provided.
Audience Programmers and non-programmers who want to become amiliar
with the Cicode language
CitectSCADA/ Vijeo Citect System Integrators and DesignersTechnical users who develop and maintain their installed
CitectSCADA or Vijeo Citect and control systems
Precursors Students must be amiliar with Microsot Windows operating
systems It is also recommended that students attend the CitectSCADA/ Vijeo
Citect Coniguration (SAUTR1201) course prior to attending this course,or have a good working knowledge o CitectSCADA/ Vijeo Citect
A general understanding o PLC communication is recommended
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
Cicode Programming Course Outline
Day 1 of 2
Day One provides an introduction to Cicode anddemonstrates how Cicode may be used:
Introduction to Cicode Variable operators used in Cicode The Cicode Editor Writing simple unctions Converting and ormatting Cicode variables
Include iles
Day 2 of 2
Day Two introduces urther Cicode programmingtechniques:
Structure programming techniques Conditional executors Return unctions Arrays Debugging
17
Part number: SAUTR1203
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
18/76
CitectHistorian/ VijeoHistorian ConfigurationThree-day Instructor-led Course
Course DescriptionCitectHistorian/ Vijeo Historian takes inormation gathered rom your SCADA system andmakes it available or display in industry standard applications. This course is designed orengineers who wish to congure and maintain a Historian project and managers who wishto analyse the data in the client tools.
DurationThree-day instructor-led course, with lunch provided.
Audience People who want detailed knowledge on how to set up and use
CitectHistorian/ Vijeo Historian Managers who require knowledge o how to use CitectHistorian/
Vijeo Historian client tools to access data CitectSCADA/ Vijeo Citect System Integrators and Designers
Precursors Solid experience in both Microsot Windows operating system
and CitectSCADA/ Vijeo Citect is required
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
CitectHistorian/ Vijeo Historian Course Outline
Day 1 of 3
Day One provides an introduction toCitectHistorian/ Vijeo Historian and itsvarious components including handson technical training:
Data sources Historian at a glance
Historian status Publish inormation Backill manager
Day 2 of 3
Day Two extends on the topicso day one and ocuses on:
Project management Tasks Events Excel client
Web client
Day 3 of 3
Day Three extends the techniquesstudied in the rst two days to includereporting:
Integrity checker Historian interpolation Process Analyst
Reports deployment manager Energy reports Case study
18
Part number: SAUTR1207
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
19/76
CitectSCADA/ Vijeo CitectConfigurationThree-day Instructor-led Course
Course DescriptionGain insight into CitectSCADA/ Vijeo Citect project design and become amiliar withconguration techniques. This interactive course includes practice with plant control,data collection, trending and reporting.
DurationThree-day instructor-led course, with lunch provided.
AudienceThose who want to become amiliar with CitectSCADA/ Vijeo
Citect project development techniques
CitectSCADA/ Vijeo Citect users, including engineering sta,maintenance sta and plant supervisors
Technical users who maintain and improve their installedCitectSCADA/ Vijeo Citect and control systems
Managers who want more than a basic understanding oCitectSCADA/ Vijeo Citect
CitectSCADA/ Vijeo Citect System Integrators and Designers
Precursors It is essential that students are amiliar with Microsot Windows operating systems Experience in PLC control system design and/or programming is desirable
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
CitectSCADA/ Vijeo Citect Configuration Course Outline
Day 1 of 3
Day One involves introduction to thevarious components o CitectSCADA/Vijeo Citect, project design,communications and graphics:
Citect coniguration environment Managing projects
Tab style projects Include projects Setting up communications Graphics
Day 2 of 3
Day Two implements variousareas o the CitectSCADA/ VijeoCitect project design, includingcontrols and alarms:
Operator input Genies and popup pages
Events Alarms
Day 3 of 3
Day Three continues with the projectdesign elements o CitectSCADA/Vijeo Citect and introduces methods oreporting and monitoring the system:
Trends via the Process Analyst Page management
Reports Accumulators Security
19
Part number: SAUTR1201
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
20/76
CitectSCADA/ Vijeo CitectCustomisation and DesignTwo-day Instructor-led Course
Course DescriptionThis interactive course will give you insight into the principles behind customisingCitectSCADA/ Vijeo Citect using custom templates, genies and popup pages. You will beusing dierent programming environments, including Cicode and VBA. In addition, you willlearn about exchanging data between CitectSCADA/ Vijeo Citect and other applicationssuch as Microsot Access and Excel.
DurationTwo-day instructor-led course, with lunch provided.
Audience
Advanced Programmers CitectSCADA/ Vijeo Citect System Integrators and Designers
Precursors Students must be amiliar with Microsot Windows operating
systems Students should also have attended the CitectSCADA/ Vijeo
Citect Coniguration course and either a Cicode Programmingor CitectSCADA/ Vijeo Citect Architecture and Redundancycourse or have at least six months experience in CitectSCADA/Vijeo Citect design and programming
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
CitectSCADA/ Vijeo Citect Customisation and Design Course Outline
Day 1 of 2
Day One ocuses on the details o creating customisedpages in your CitectSCADA/ Vijeo Citect project:
Custom templates Complex genies Genie orms Smart popup pages
Day 2 of 2
Day Two extends the material rom Day Oneto improve the operation and managemento graphics pages and incorporates some othe most commonly used advanced eaturesincluding connecting to other applications:
Cicode Forms CitectSCADA and ODBC
ActiveX integration
20
Part number: SAUTR1214
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
21/76
CitectSCADA/ Vijeo CitectUpgradeOne-day Instructor-led Course (On Demand)
Course DescriptionReceive an update on CitectSCADA/ Vijeo Citect project design andconguration techniques, including how to implement an upgrade andview the latest product eatures.
DurationOne-day (on demand) instructor-led course, with lunch provided.
AudienceThose who need to know about new product eatures in the
latest version o CitectSCADA/ Vijeo Citect
CitectSCADA/ Vijeo Citect System Integrators and DesignersTechnical users o existing CitectSCADA/ Vijeo Citect systems
Precursors Students must be amiliar with Microsot Windows operating
systemsAt least two years experience in CitectSCADA/ Vijeo Citect
design is requiredThis course is primarily intended or persons with strong
experience in CitectSCADA V6.x
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
CitectSCADA Upgrade Course Outline
This course initially looks at how to install the latest versions o CitectSCADA/ Vijeo Citect and considers any issueswith upgrading projects. Most o the time is then spent investigating the eatures o the new version and how to makebest use o them:
How to prepare or an upgrade System requirements How to upgrade the project Installing multiple versions o CitectSCADA/ Vijeo Citect Templates
Graphics Enhancements Tag Extensions Server-Side Online Changes
21
Part number: SAUTR1213
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
22/76
MDT AutoSaveAdministrator TrainingTwo-day On Demand Workshop
Course DescriptionThe AutoSave application is a change management system to which automatesprocesses and procedures or real time modications o both hardware device suchas Programmable Process Controllers (PLCs) and sotware applications such as VijeoCitect SCADA. The MDT AutoSave Administration workshop provides students withpractical experience when implementing the AutoSave tool; including installation,conguration and application.
DurationTwo-day workshop, with lunch provided.
AudienceThis programs is aimed at both system administrators and
engineers responsible or the liecycle support andmanagement o AutoSave implementation
Precursors Essential that attendee have a sound working knowledge o
Microsot XP operating system Its is also desirable to have amiliar knowledge o Microsot Windows server
environments (Windows 2003 or Windows 2008); PLCs and SCADA devices
Collaborative Automation
by
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
MDT AutoSave Administrator Training Course Outline
Day 1 of 2
Day One covers general conguration and installationprocedures; including:
MDT AutoSave overview MS Server Environment
Overview o MS Server environmentsand available architectures
Overview o IIS and SQL Server MS licensing requirements or AutoSave
Installation, process and procedures Installation o application, server and client. Conigurations o server and client
Security/ Access Developing access to the system. Adding and
coniguring users and levels and access. Setting up system architecture ( olders/containers)
Day 2 of 2
Day Two Device extends the topics covered in Day One toinclude:
Devices and Wires Installation and Coniguration o Devices Devices and Wires implementation and application
Plug-In implementation and application Universal Plug-In Unity (PLC) Plug-In
Vijeo Citect Plug-In
22
Part number: SAUTR1210
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
23/76
Vijeo Designer Software (HMI)An introduction to Human Machine InterfaceOne-day Instructor-led Course
Course Description
This course will provide an overview o the Vijeo Designer sotware and introduce
the various components and operations available to you. We will discuss installation,conguration and implementation o HMI process alarms and data logging.
Participants are required to bring their own laptop to the training.A trial version o the Vijeo Designer sotware will be provided.
DurationOne-day Instructor-led training course with lunch provided.
AudienceThis course is intended or trades personnel, technicians
and engineers who require a working knowledgeo the Vijeo Designer programming environment, HMIrange and connectivity
Precursors General understanding o Programmable Logic Controller (PLC)
terminology and good PC knowledge are desirable but not necessary
Intermediate AdvancedBasic
Solutions FundamentalsProduct
70%30%
Practical Theory
Vijeo Designer Software: Introduction to HMI Course Outline
Whether machine manuacturer, operator or user, Vijeo Designer makes things easy or you at all stages o yourHMI application lie cycles. Learn how to build a complete project:
HMI and PLC connectivity Vijeo Designer application development Install, run and navigate Vijeo Designer component Oline testing using the simulator Managing HMI remotely Trending and logging data Understand hardware capability
Build an application starting with basic and simple eatures; progressing to more advanced levels Setup, connect and download the project using Ethernet or USB cable Setup basic trending and data logging
23
Part number: SAUTR1401
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
24/76
Vijeo Designer Software (HMI)Advanced Human Machine InterfaceOne-day On Demand Workshop
Course DescriptionThis progressive course will urther develop your understanding o the Vijeo Designersotware and introduce the various components and operations available to you. We willdiscuss advanced topics including scripting, data logging and resources. Participants arerequired to bring their own laptop to the training.
A trial version o Vijeo Designer sotware will be provided.
DurationOne-day workshop, with lunch provided.
AudienceThis course is intended or engineers and technicians who require an
in-depth knowledge o the Vijeo Designer programming environment,particularly in the areas o advanced unctions (such as scripting,data logging and resources)
PrecursorsVijeo Designer Sotware (HMI): Introduction to Human
Machine Interace course (SAUTR1401)A good understanding o PLC terminology and PC knowledge
Intermediate AdvancedBasic
Solutions FundamentalsProduct
70%30%
Practical Theory
Vijeo Designer Software: Advanced (HMI) Course Outline
Whether machine manuacturer, operator or user, Vijeo Designer makes things easy or youat all stages o your HMI application liecycles. Learn the concepts and implementation o:
Scripting Advanced communications Exporting and importing data or re-use Using resources Advanced security
Trending and data logging Generation o data with oice tools Intelligent Data Service data gathering
24
Part number: SAUTR1405
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
25/76
Web Designer and ETG3000Gateway ServicesOne-day On Demand Workshop
Course DescriptionConguration, web and HMI unctions and services using Web Designer, this sotwaretool enables you to congure web pages and web services embedded within theFactoryCast HMI and Gateway modules.
DurationOne-day workshop, with lunch provided.
AudienceThis workshop is designed or maintenance and design
engineers and OEMs, setting up remote access to PLC
and end devices, using embedded web services
Precursors General knowledge o PLC and web terminologies Knowledge o Schneider Electric industrial automation
protocols and Ethernet services
Intermediate AdvancedBasic
Solutions FundamentalsProduct
50%50%
Practical Theory
Web Designer and ETG3000 Gateway Services Course Outline
This course is designed to assist students in becoming procient with Web Designer. Topics include:
Discuss the eatures o the ETG3xxx Product line Overview o dierent possible architectures available using ETG3xxx products Transparent gateway, remote programming/setup or maintenance o devices application Embedded Web server Remote Diagnostics, monitoring and control o Ethernet and serial devices Data acquisition and data processing using ETG3xxx Graphic monitoring and user Web pages using ETG3xxx
Local data logging and remote database connectivity Calculation using arithmetic and logic scripting Unity Application browser via HMI Factory Cast module Alarming and Reporting via email
25
Part number: SAUTR1402
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
26/76
Networks and
Communication
Courses
26
-
7/30/2019 Training Catalogue 2012
27/76
Advantys Configurator STBDistributed I/OOne-day Optional Add-on Workshop
Course DescriptionThe objective o this course is to gain the knowledge and become expert withAdvantys STB distributed I/O, learn the technical eatures and possibilities o anAdvantys STB solution.
This course may be combined with Industrial Communication (SAUTR1102)to create a our-day workshop.
DurationOne-day optional add-on workshop to the Unity Pro Programmingcourse (SAUTR1003), with lunch provided.
Audience Product Application Engineers and Technical Service Engineers
maintaining Advantys on-site Technical support engineer level 1 in automation ield
supporting Advantys STB and PLC
Precursors Good knowledge o the Advantys STB oer Good knowledge o coniguring I/O scanning on a Schneider Electric
PLC with Ethernet TCP/IP
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
Advantys STB Distributed I/O Course Outline
This course is designed to assist students in becoming procient with Advantys STB Distributed I/O.Topics covered include:
STB as a complete product integration solution Discover the entire range o the dierent modules and extensions Coniguration and debugging a complete island on Ethernet TCP/IP network Importing and exporting variables rom Advantys to Unity Pro Connecting TeSys U in Advantys island
Assembly Rules and Restrictions CANopen Extension and enhanced products Run-Time Parameters and PKW Diagnostics and Feedback Relex Actions
27
Part number: SAUTR1404
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
28/76
CitectSCADA/ Vijeo CitectArchitecture and RedundancyTwo-day Instructor-led Course
Course DescriptionThis newly updated course replaces CitectSCADA/ Vijeo Citect Networking. Gainadvanced networking skills and knowledge, including how CitectSCADA/ Vijeo Citectuses a network, redundancy and distributed servers. Learn more about connecting toCitectSCADA/ Vijeo Citect remotely through the Web Client.
DurationTwo-day instructor-led course, with lunch provided.
Audience Network administrators who need to understand how
CitectSCADA/ Vijeo Citect is conigured on their network CitectSCADA/ Vijeo Citect System Integrators and DesignersTechnical users who maintain and improve their installed
CitectSCADA/ Vijeo Citect and control systems
Precursors Students must be amiliar with Microsot Windows operating systems It is also recommended that students have attended a CitectSCADA/
Vijeo Citect Coniguration (SAUTR1201) course or have at leastsix months experience in CitectSCADA/ Vijeo Citect design
Intermediate AdvancedBasic
Solutions FundamentalsProduct
20%80%
Practical Theory
CitectSCADA/ Vijeo Citect Architecture and Redundancy Course Outline
Day 1 of 2
Day One ocuses on the details o networkingin CitectSCADA/ Vijeo Citect and theimplementation o a ully networked andredundant system:
Clustering Distributed processing Runtime system management
Online changes Coniguring a global display client
Day 2 of 2
Day Two incorporates some o the most commonlyused advanced eatures o CitectSCADA/ VijeoCitect, including remote communications:
CitectSCADA/ Vijeo Citect redundancy Web Client System security
Part number: SAUTR1109
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
28
-
7/30/2019 Training Catalogue 2012
29/76
CitectSCADA/ Vijeo CitectDiagnostics and TroubleshootingOne-day Instructor-led Course
Course DescriptionThe Diagnostics and Troubleshooting course provides engineers with the skills andknowledge to help monitor the perormance and health o their SCADA system,troubleshoot subtle problems both within a project and the interconnection betweennetworked computers.
DurationOne-day Instructor-led course, with lunch provided.
Audience Engineers who are responsible or the design and maintenance
o a SCADA network Network administrators who need to understand how SCADA
is conigured on their network CitectSCADA/ Vijeo Citect System Integrators and Designers Technical users who maintain and troubleshoot installed
SCADA and control systems
Precursors Students must be amiliar with Microsot Windows Operating Systems This advanced course assumes students have attended SCADA Coniguration
(SAUTR1201) and Architecture and Redundancy (SAUTR1109)
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
CitectSCADA/ Vijeo Citect Diagnostics and Troubleshooting Course Outline
Our SCADA sotware has been designed with fexibility in mind and our customers successully use theirSCADA sotware to handle large amounts o data, tags, alarms, reports, etc. This new course investigatesthe methods and tools available to system designers to help monitor the perormance and health o theirSCADA system:
Cicode and the Citect Kernel Network management and the Kernel Publish subscribe model o communications System perormance management
Tag extensions System proile tools Communication analysis
29
Part number: SAUTR1108
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
30/76
CT1 Ethernet BasicsTwo-day Instructor-led Course
Course DescriptionThis course will introduce participants to the undamentals o Industrial EthernetNetworks. At the end o this course participants will have a sound understandingo Ethernet and how it is deployed in an Industrial Network.
Participants should also attend the CT2 Industrial Networking course or urtherdetails on Ethernet undamentals and additional topics on Industrial Ethernet networks.
DurationTwo-day Instructor-led course, with lunch provided.
AudienceThis course is aimed at engineering and technical sta involvedin supporting modern Ethernet based industrial control systems
Anyone wanting to understand the basic principals o IndustrialEthernet Networks
Precursors No previous knowledge o the subject is required Students must be amiliar with Microsot Windows Operating Systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
CT1 - Ethernet Basics Course Outline
Day 1 of 2
Day One introduces the undamentals oIndustrial Ethernet Networks including:
Ethernet standardisation bodies Physical network components
Cables - copper/ibre Power over Ethernet Intro Ethernet Frame and message types
Day 2 of 2
Day Two continues with an overview o otherphysical network components including:
Hubs, Switches and Media Converters Speeds - 10/100/1GB and Hal Full Duplex Network Topologies - bus, star, ring, mesh Network Traic Control Network Management
Part number: SAUTR1111
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
30
-
7/30/2019 Training Catalogue 2012
31/76
CT2 Network InfrastructureThree-day Instructor-led course
Course DescriptionThis course will build on the undamentals and principles presented in theCT1 Ethernet Basics (SAUTR1111). It will provide theoretical and practicalknowledge on TCP/IP, static routing, multicasting, Quality o Service (QOS), etc.The emphasis will be on deploying these principles in an Industrial Ethernet Network.
DurationThree-day Instructor-led course, with lunch provided.
Audience This course is aimed at engineering and technical sta involved
in supporting modern Ethernet based industrial control systems
Precursors Students must be amiliar with Industrial Ethernet Networks.
Previous completion o the CT1 Ethernet Basics (SAUTR1111)course is highly recommended
Students must be amiliar with Microsot Windows Operating Systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
CT2 - Network Infrastructure Course Outline
Day 1 of 3
Day One introduces studentsto the undamentals o networkinrastructure, including:
IP - Internet protocol IP Communications
ILAN IRouted Network
UDP and TCP
Day 2 of 3
Day Two ocuses on the variousinrastructure applications including:
SNTP PTP DHCP SNMP
Day 3 of 3
Day Three explores variousdeployment options including:
Multicasting IGMP and GMRP
Quality o Service (QOS) Industrial Protocols
Modbus TCP/Ethernet IP
Security
31
Part number: SAUTR1112
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
32/76
CN1 ConneXium ProductConfiguration (TCSESM and TCSESM-E)Two-day Instructor-led Course
Course DescriptionParticipants will receive in-depth knowledge on the ConneXium Managed Switches,including installation, commissioning and supervision. This training course is boththeoretical and practical. The necessary knowledge about unctions and deploymentpossibilities o the switches is taught in individual theory blocks. Each block is ollowedby practical exercises designed to amiliarize participants with the devices through rsthand experience.
DurationTwo-day Instructor-led course, with lunch provided.
AudienceThis course is aimed at engineering and technical sta involvedin supporting modern Ethernet based industrial control systems
Precursors Students must be amiliar with Industrial Ethernet Networks.
Previous completion o the CT1 Ethernet Basics (SAUTR1111) andCT2 Industrial Networking (SAUTR1112) courses is highly recommended
Students must be amiliar with Microsot Windows Operating Systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
CN1 - ConneXium Product Configuration Course Outline
Day 1 of 2
Day One introduces the ConneXium product,including:
Overview o ConneXiumManaged Switch Products
Device properties e.g. orm actor,temperature ranges, certiications
Firmware and coniguration management Switching
Port coniguration Multicast control VLANs
Day 1 of 2
Day Two introduces urther advanced topicsincluding:
Redundancy HIPER Ring, Rapid Spanning
Tree, DRS Dual Ring RSTP Diagnostics
Port Mirroring, device status, event log Security
Port Security, authentication Advanced
DHCP relay, command line interace
Part number: SAUTR1113
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
32
-
7/30/2019 Training Catalogue 2012
33/76
ConneXium WiFi SwitchesOne-day Optional Add-on Course
Course DescriptionThe objective o this course is to provide students with an understanding o theprinciples o wireless communication including how to congure the ConneXium WiFiswitches in an industrial environment.
DurationOne-day optional add-on course to the High Availability Ethernet Networkingand Redundancy course (SAUTR1103). Lunch provided.
Audience This course is aimed at engineering and technical sta involved in supporting
modern Ethernet based industrial control systems
Precursors Students should be amiliar with basic networking terminology and
Microsot Windows Students are required to have completed Unity Pro Programming
(SAUTR1003) and High Availability Ethernet Networkingand Redundancy course (SAUTR1103)
Students should be competent with industrial automation concepts Understanding o collaborative automation control system concepts
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
ConneXium WiFi Switches Course Outline
This course is designed to teach students how to conigure ConneXium WiFi switches in anindustrial environment. Topics include:
Wireless Data Communications Standards and Uses Untethered device/network access (roaming clients) Replace standard cabling to reduce installation costs Installations where standard cabling is not possible Seamless Wired and Wireless Wireless Technologies within the Wireless LAN StandardsTerms, Deinitions and Acronyms
33
Part number: SAUTR1114
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
34/76
High Availability EthernetNetworking and RedundancyTwo-day On Demand Workshop
Course DescriptionThe objective o this course is to provide students with a working knowledge o industrialnetworking both in theory and implementation. At the end o this course, students will havean understanding o the range o Schneider Electric Ethernet based network solutionsincluding communications, network architecture structures, network redundancy, highavailability and implementation methods associated with automation control systems. Ahands-on practical session allows students to implement validated network architecturesand apply a range o sotware tools to diagnose network status.
DurationTwo-day on demand workshop, with lunch provided.
Audience This course is aimed at engineering and technical sta
involved in supporting modern Ethernet based industrialcontrol systems
Precursors Students should be amiliar with basic networking
terminology and Microsot Windows Students are required to have completed Unity Pro
Programming (SAUTR1003) course Students should be competent with industrial automation concepts Understanding o collaborative automation control system concepts
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
High Availability Ethernet Networking and Redundancy Course Outline
Day 1 of 2
Day One introduces students to industrial networkingconcepts including:
Deining industry terms Ethernet theory Introduction to Transceivers, Switches and Routers ConneXium switches/sotware Topologies, OSI-layers, IP Addressing, TCP/IP
properties, IP address and subnetting, packets,
Port Mirroring Redundancy, Hyper Ring, RSTP, Link
Redundancy, Link Aggregation, MRP Traic control including Restricting Broadcast QoS VLANS Multicasting Introduction to industrial communication protocols
Day 2 of 2
Day Two ocuses on network building blocksand industrial application architectures:
Network Management includingmangers and agents and SNMP
Network architecture, options,design and implementation
Networking architecture or PAC/PLC andwindows based client/server structure
Industrial control network redundancy Overview to network security - issues Media selection criteria Cabling overviewTypes, application, terminationTroubleshooting principles and tools Overview o DRS switch unctionality
Part number: SAUTR1103
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
34
-
7/30/2019 Training Catalogue 2012
35/76
Industrial Communication(Modbus, CANopen, Profibus, EthernetIP)Three-day Instructor-led Course (On Demand)
Course Description
The objective o this course is to provide students with an understanding o the keycommunication eldbuses and networks in the industrial market; including: Modbus,Probus, CANopen, Ethernet TCP/IP (CIP/ Modbus), FDT/DTM.
This course can be combined with the Advantys STB Distributed I/O (SAUTR1404)add-on course to create a our-day course.
DurationThree-day on demand workshop, with lunch provided.
Audience This course is optimised to suit Project, Design, Commissioning
or Maintenance Engineers; or anyone who needs to implementindustrial communication networks
Precursors Knowledge o industrial communication principles Ability to conigure a PLC using Unity Pro
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
Industrial Communication Course Outline
Day 1 of 3
Day One introduces principles o industrialcommunications including:
What is communication Mandatory communication items Industrial communicationThe OSI model Choice and positioning o networksTopologies
Layers Modbus Programming communication
with Unity PLCs BMXNOM0200 coniguration
Day 2 of 3
Day Two extends the material romday one to include:
Ethernet Modbus TCP/IP Basic Ethernet principles Networking with Windows Protocols IP address classes Troubleshooting TCP/IP
Network design Ethernet Modbus TCP
coniguration with Unity Pro FDT/DTM I/O scanning with Unity Pro CANopen coniguration
with Unity Pro
Day 3 of 3
Day Three continues to extend theconcepts covered in the previousdays by including:
Proibus Hardware setup PRM sotware Unity Pro DTM coniguration PRM coniguration
Fieldbus discovery Device Proibus parameters Online diagnostics DVP1 acyclic requests Ethernet/ IP coniguration with
Unity Pro and NOC0401 Explicit messaging (requests) Local slaves
35
Part number: SAUTR1102
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
36/76
Industrial CommunicationASi or LegacyOne-day Optional Add-on Workshop
Course Description
The objective o this course is to design, troubleshoot and commission a systemusing the technical eatures o one o the ollowing networks:
Actuator Sensor interace (ASi) Modbus Plus (MB+) FIP
The course involves a lot o hands on experience with equipment to gain an intellectualand practical based knowledge o the system. This course is ideal or engineers involvedin migrations rom some o the legacy networks like FIP and MB+ as well as existinginstallations which have machine based networks in them.
DurationOne-day optional add-on workshop to the Industrial Communication(Modbus, CANopen, Probus, EthernetIP) course (SAUTR1102).Lunch provided.
Audience These optional workshops are optimised to suit Maintenance
Technicians; or anyone who needs to implement industrialcommunication networks
Precursors
Participants must have a good working knowledge o PLCs andcommunications as well as experience in using Unity. This coursemust be accompanied by the Industrial Communication(SAUTR1102) to orm a our-day course
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
Industrial Communication ASi or Legacy Course Outline
Day 1 of 3
AS-interace Content:
Introduction to ASi ASi wiring principles The ASi protocol in depth ASi Sae ASi system design Programming ASi with the M340
ASi master module using theB+W ASi ethernet gateway
Troubleshooting ASi
Day 2 of 3
Modbus Plus (MB+) Content:
Modbus Plus hardware Network topology Peer Cop Modbus Plus status Master block Local and remote statistics MPBSTAT Network bridging Distributive control
Day 3 of 3
FIPIO Content:
Fipio network dynamics Fipio hardware and assembly Network cable and installation Conigure network devices Network status Fipio network debug Unity Pro or PL7 Pro sotware tools
36
Part number: SAUTR1110
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
37/76
37
Introduction to Instrumentationand Process Control (HART)Three-day On Demand Workshop
Course Description
This practical instrumentation course will provide attendees with a basic backgroundand the role o instrumentation in maintaining a stable and controlled process. Thecourse is designed to provide maximum hands-on in order to provide attendeeswith practical experience in areas o instrument calibration, signal interpretation andcontrol loop tuning.
DurationThree-day on demand workshop, with lunch provided.
Audience
This course is intended or technicians, electricians and electrical,mechanical and process engineers involved in plant maintenance
Precursors It is essential that students are amiliar with Microsot Windows
operating systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
60%40%
Practical Theory
Introduction to Instrumentation and Process Control Course Outline
Day 1 of 3
Day One introduces processcontrol concepts, instrumentation andtheory, including:
Basic measurement theory Understanding process dynamics
including, how and why wecalibrate instruments
Instrument signals, Analog and Digital
Overview o signal conditioning Control elements - Variable
Speed Drives and Valves Process control overview, general
terminology and types o control True Colour
Day 2 of 3
Day Two builds on the conceptscovered in Day One, including:
Understanding P, PI and PIDcontrol. The eect o usinggain, integral and derivativetime on the control output
Overview o cascade andeed orward control
Calibration o measuringelement and a controlelement (Valve + I/P)
Tuning methodsThe role o modeling
and simulation Coniguring process controllers
or PID control
Day 3 of 3
Day Three continues to extend theconcepts introduced on Days One andTwo, including:
Understanding and designinginstrumentation architecturesbased on the HARTcommunication protocol
Implementing HART-based
ield devices with our hostsystem interace
Connecting to HART dataand inormation sitting in aHART enabled device
Introduction to asset managementtools and calibration techniques
Part number: SAUTR1104
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
38/76
Safety and
System Tools
Courses
38
-
7/30/2019 Training Catalogue 2012
39/76
Application of Standard LibrariesOne-day On Demand Workshop
Course DescriptionThis course is aimed at developing an understanding o validated Plant Solutions librariesavailable across existing engineering and visualisation products. This workshop objectiveis to provide practical experience in the use o our libraries to provide all basic, advancedand customised control unctions, as well as the interaces or ecient monitoring andoperation o the plant. Libraries standardise the communication and conguration odevices and unctional elements within the plant.
DurationOne-day workshop, with lunch provided.
Audience This course is aimed at PlantStruxure Certiied engineers
who intend to implement our TVDA based process controlsolutions with speciic application library requirements
Precursors Attendees are expected to have a good knowledge o
Citect SCADA/ Vijeo Citect and Unity Pro engineering systems Students must be amiliar with Microsot Windows operating systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
60%40%
Practical Theory
Application of Standard Libraries Course Outline
This one day workshop is customised to meet your individual requirements. The course isstructured to include a combination o the ollowing platorms and associated libraries:
Unity Pro
Fuzzy control library Flow control library HVAC library
Predictive control libraryTeSys library
Unity Pro/ UAG/ Plant Solutions / Vijeo Citect
Enhance process library Unity Pro/ sg2/ UAG/ Plant Solutions / Vijeo Citect
Device and process library
39
Part number: SAUTR1303
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
40/76
Safety FundamentalsTwo-day Instructor-led Course (On Demand)
Course DescriptionThe objective o this course is to explore and explain the benets, requirements and obligationssurrounding plant process and unctional machine saety requirements. The workshop includesa combination o class room instruction ollowed by hands-on experience with tutorials andexamples. Real lie scenarios will be used in classroom discussion and debate, students areencouraged to bring documentation that can be used and shared with the class.
DurationTwo-day instructor-led course, with lunch provided.
Audience
This course is designed to suit Systems Integrators, OEMsor anyone who needs to design, implement or maintain saetyin and around Plant and Machinery
Precursors Students should complete the online Fundamentals o Saety
course and have at least six months experience with saetycontrol systems and understand general automationprogramming and engineering principles
Intermediate AdvancedBasic
Solutions FundamentalsProduct
70%30%
Practical Theory
Safety Fundamentals Course Outline
Day 1 of 2
Day One provides an overview saety undamentals,then covers the ollowing topics:
Liecycle Risk management or Plant and Machine(AS/NZS 4360:2004 Risk management)
National OHS Strategy 2002-2012 (Sae Design) Principles o Sae Design The deinition o Reasonably Practicable Reliability vs. Probability
Saety System Principles - Hierarchy o Control Introducing Functional (ISO13849-1) and
Qualitative (AS4024) Machine Saety Standards Saety Integrity Levels, Categories and
Perormance Levels. Selecting theappropriate method or your installation
Day 2 of 2
Day two extends the undamentals covered on dayone to include:
Detailed comparison o AS4024 and ISO13849-1 Measuring compliance against each standardTrue to lie examples o managing, assessing and
achieving compliance o a typical automatedcontrol system
Prepared scenario allowing students
to assess, design and validate a saetysystem, while applying legal and regulatoryramework, reasonably practicable concepts,hierarchy o control and standards
SISTEMA Workshop Guided exampleso how to use sotware evaluation toolor unctional saety on machines
40
Part number: SAUTR1011
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
41/76
Quantum SIL3 SafetyImplementationTwo-day On Demand Workshop
Course DescriptionThe objective o this workshop is to be able to implement a unctional saetyapplication using the TUV unction blocks and certied Quantum SIL3 hardware.
Participants are required to bring their own laptop, with Unity Pro already installedto the training.
DurationCustom two-day on demand workshop, with lunch provided.
Audience
This course is intended or end-users or systemintegrator project technical teams responsible orimplementing Quantum SIL3 projects
Precursors You should have a working knowledge o Unity Knowledge o Saety Norms is a plus but not mandatory Students should have attended Unity Pro Programming
Course (SAUTR1002/3) and High Availability EthernetNetworking and Redundancy (SAUTR1103)
Student should also have attended Saety Fundamentalscourse (SAUTR1011)
Intermediate AdvancedBasic
Solutions FundamentalsProduct
50%50%
Practical Theory
Quantum SIL3 Safety Implementation Course Outline
Day 1 of 2
Day One provides an introduction to unctionalsaety including:
Saety CPU Project and Architectures Hands on labs including:
Starting a project Maintenance mode Saety mode Application protection
Communication with UMA
Day 2 of 2
Day two extends the undamentals coveredon Day One to include:
Saety I/O modules Hands on labs including:
High-availability blocks Quantum Saety Hot Stand-by System, Hands-on Labs (S_HSBY_SWAP)
41
Part number: SAUTR1010
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
42/76
Safety PLC Programming(Preventa XPS-MF)Three-day Instructor-led Course (On Demand)
Course DescriptionThis course provides students with an understanding o the dierence between a normaland a Saety PLC (both Hardware and Sotware) and be able to create a simple applicationunder XPSMFWIN. Learn how to allocate XPS resources to projects and congure saetyrelated unctions; set up, connect and download projects via Sae Ethernet; diagnose andtroubleshoot the online XPS PLC.
DurationThree-day instructor-led course, with lunch provided.
Audience
Project and Design Engineers who design, write, commission anddocument Saety PLC user application programs
Precursors Good understanding o PLCs and industrial automation concepts. Knowledge o Saety Norms and considerations is a plus but
not mandatory Competency in the Microsot Windows environments Students should have completed High Availability Ethernet
Networking and Redundancy (SAUTR1103) and MachineSaety Essentials (SAUTR1011)
Intermediate AdvancedBasic
Solutions FundamentalsProduct
60%40%
Practical Theory
Safety PLC Programming (Preventa XPS-MF) Course Outline
Day 1 of 3
Day One ocuses on the undamentalso PLCs including terminology andprogramming:
Introduction to unctional saety IEC Terms Programming Principles
and Terminology The XPSMF Saety PLC Family
Day 2 of 3
Day Two extends the material romDay One to include XPSMF Sotwareimplementation:
Saety Inputs andOutputs cards
Sae and Non SaeCommunications
Understand security and
consistency checks Usage o unction blocks Line monitoring unction
Day 3 of 3
Day Three incorporates the skillslearned into the programming anddocumentation o saety projects:
Analog inputs management Sae Ethernet communication:
Remote I/O PLC to PLC
Modbus TCP/IP communication
42
Part number: SAUTR1005
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
43/76
Unity Application Generator(UAG) SoftwareThree-day On Demand Workshop
Course DescriptionThis course covers all steps how to realise and operate an automation control system(PLC & SCADA) using the related SW tools. UAG workshop provides hands-on basictraining on how to design and create a collaborative process control system basedupon Unity Pro and Vijeo Citect.
DurationThree-day workshop, with lunch provided.
Audience System Integrators, Project and Design Engineers who design
and implement Process Control and Automation Systems
Precursors Students should have attended Unity Pro Programming Course
(SAUTR1002/3) and High Availability Ethernet Networking andRedundancy (SAUTR1103) as well as SCADA ConigurationSAUTR1201
Intermediate AdvancedBasic
Solutions FundamentalsProduct
50%50%
Practical Theory
Unity Application Generator (UAG) Course Outline
Day 1 of 2
Day One provides anintroduction to the UAG systemapproach, including:
System setup Customising UAG to
enorce site standards System requirements Physical model
Topological model Generating HMI
Day 2 of 3
Building on the undamentalsintroduced on Day One, thesecond day ocuses on:
Vijeo Citect coniguration Fieldbus PLC channels PLC-PLC communication Net Partner
Generation DFB Unity Pro DFB Concept Structured data
Day 3 of 3
Day Three ties up the inormationpresented in the rst two days andapplies the techniques to aspecic project. Topics include:
SCoD EditorVijeo Citect graphics design Worklow to build an application Case study
43
Part number: SAUTR1301
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
44/76
PLC
Courses
44
-
7/30/2019 Training Catalogue 2012
45/76
Advantys Configurator STBDistributed I/OOne-day Optional Add-on Workshop
Course DescriptionThe objective o this course is to gain the knowledge and become expert withAdvantys STB distributed I/O, learn the technical eatures and possibilities o anAdvantys STB solution.
This course may be combined with Industrial Communication (SAUTR1102)to create a our-day workshop.
DurationOne-day optional add-on workshop to the Unity Pro Programmingcourse (SAUTR1003), with lunch provided.
AudienceThis course is designed to suit Systems Integrators, OEMs or anyone who
needs to design, implement or maintain Advantys STB Distributed I/O
Precursors Good knowledge o the Advantys STB oer Good knowledge o coniguring I/O scanning on a Schneider Electric
PLC with Ethernet TCP/IP
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
Advantys STB Distributed I/O Course Outline
This course is designed to assist students in becoming procient with Advantys STB Distributed I/O.Topics covered include:
STB as a complete product integration solution Discover the entire range o the dierent modules and extensions Coniguration and debugging a complete island on Ethernet TCP/IP network Importing and exporting variables rom Advantys to Unity Pro Connecting TeSys U in Advantys island
Assembly Rules and Restrictions CANopen Extension and enhanced products Run-Time Parameters and PKW Diagnostics and Feedback Relex Actions
45
Part number: SAUTR1404
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
46/76
Concept Maintenance(with Quantum/Momentum PLC Hardware)Three-day Instructor-led Course (On Demand)
Course DescriptionThis course aims to provide participants with the knowledge to successully maintain plantand systems controlled by Quantum/ Momentum PLCs which use Concept programmingsotware. All ve IEC programming languages: Sequential Function Chart (SFC), FunctionBlock Diagram (FBD), Ladder Diagram (LD), Structured Text (ST) and Instruction List (IL)are covered. Using Derived Function Blocks (DFB) and Derived Data Types (DDT) are alsoincluded. Peer-to-peer communications, along with I/O Scanning and global data base arealso covered, as are basic troubleshooting procedures.
DurationThree-day (on demand) instructor-led course, with lunch provided.
Audience Electrical maintenance personnel Programming engineers
Precursors Basic understanding o PLCs is required Competency in using Microsot Windows
Intermediate AdvancedBasic
Solutions FundamentalsProduct
40%60%
Practical Theory
Concept Maintenance Course Outline
Day 1 of 3
Day One ocuses on PLC hardwareand an introduction to Concept:
Setting up and wiring Quantum/Momentum PLC hardware
Introduction to basic Conceptprocedures and to theConcept PLC Simulators
The Project Browserand Preerences
Day 2 of 3
Day Two extends the material romDay One to include:
Variables Editor and ReerenceData Editor (RDE) templates
Animating, editing andsaving programs
Searching and replacing objects Programming using Sequential
Function Chart (SFC) language PLC Coniguration screens PLC communication overview Connecting Concept to
Quantum/ Momentum PLCs Download and upload projects Online diagnostics and
troubleshooting
Day 3 of 3
Day Three combines the skillsacquired during Days One andTwo and includes:
Function Block Diagram(FBD) scanning
Using Derived FunctionBlocks (DFB) and DerivedData Types (DDT)
IEC Ladder Diagram(LD) programming
Introduction to StructuredText (ST) and to InstructionList (IL) programming
Archiving and exportingConcept projects
46
Part number: SAUTR1007
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
47/76
Concept Programming(with Quantum/Momentum PLC Hardware)Four-day Instructor-led Course (On Demand)
Course DescriptionThis course aims to provide participants with the knowledge to successully design,congure, install, connect, program, commission and document Quantum/ MomentumPLC projects. The implications o IEC61131 are covered, as are all ve IEC programminglanguages: Sequential Function Chart (SFC), Function Block Diagram (FBD), LadderDiagram (LD), Structured Text (ST) and Instruction List (IL). The course also includescreating and using Derived Function Blocks (DFB) and Derived Data Types (DDT); pluspeer-to-peer communications, along with I/O scanning and global data base.
DurationFour-day (on demand) instructor-led course, with lunch provided.
Audience Project/ design/ programming engineers Electrical maintenance personnel
Precursors A sound understanding o PLCs is required Competency in using Microsot Windows
Intermediate AdvancedBasic
Solutions FundamentalsProduct
50%50%
Practical Theory
Concept Programming Course Outline
Day 1 of 4
PLC hardware and an introduction to Conceptincluding:
Selection, layout, installation, wiringand coniguring Quantum andMomentum PLC hardware
Overview o the IEC61131 standard Introduction to basic Concept procedures
and the Concept PLC Simulators
Day 2 of 4
The Variables Editor, Reerence Data Editor
templates and the Project BrowserAnimation editing and saving programs Searching and replacing objects Programming using the Sequential
Function Chart (SFC) language
Day 3 of 4
Coniguring digital and analogue I/O racks,Ethernet, peer-to-peer communications,I/O scanning and the global data base
Using media to connect Conceptto selected PLCs
Download and upload Concept projects Update PLC modules with
Concepts ExecLoader Online diagnostics and troubleshooting
Day 4 of 4
Function Block Diagram (FBD) scanning
Derived Function Blocks (DFB) and Macros Creating and using Derived Data Types (DDT) IEC Ladder Diagram (LD) and non-IEC
984 Ladder Logic programming Introduction to Structured Text (ST) and
Instruction List (IL) programming Printing, archiving and exporting projects
47
Part number: SAUTR1006
Easy ways to registerWeb: www.schneider-electric.com.au/trainingEmail: [email protected]
-
7/30/2019 Training Catalogue 2012
48/76
Introduction to Instrumentationand Process Control (HART)Three-day On Demand Workshop
Course DescriptionThis practical instrumentation course will provide attendees with a basic background andthe role o instrumentation in maintaining a stable and controlled process. The courseis designed to provide maximum hands-on in order to provide attendees with practicalexperience in areas o instrument calibration, signal interpretation and control loop tuning.
DurationThree-day on demand workshop, with lunch provided.
Audience This course is intended or technicians, electricians and
electrical, mechanical and process engineers involved inplant maintenance
Precursors It is essential that students are amiliar with Microsot
Windows operating systems
Intermediate AdvancedBasic
Solutions FundamentalsProduct
60%40%
Practical Theory
Introduction to Instrumentation and Process Control Course Outline
Day 1 of 3
Day One introduces processcontrol concepts, instrumentation andtheory, including:
Basic measurement theory Understanding process
dynamics including, how andwhy we calibrate instruments
Instrument signals,Analog and Digital
Overview o signalconditioning
Control elements - Variable
Speed Drives and Valves Process control overview, general
terminology and types o controlTrue Colour
Day 2 of 3
Day Two builds on the conceptscovered in Day One, including:
Understanding P, PI and PIDcontrol. The eect o usinggain, integral and derivativetime on the control output
Overview o cascade andeed orward control
Calibration o measuringelement and a controlelement (Valve + I/P)
Tuning methods
The role o modeling and simulation Coniguring processcontrollers or PID control
Day 3 of 3
Day Three continues to extend theconcepts introduced on Days Oneand Two, including:
Understanding and designinginstrumentation architecturesbased on the HARTcommunication protocol
Implementing HART-basedield devices with ourhost system interace
Connecting to HART dataand inormation sitting in a
HART enabl