BEAD SHOP ZÁSADA 468 25 Zásada+420 488 117 743 beadshop@preciosa.com 50°41‘49 N, 15°15‘55 E

GLASS SHOP DESNÁKrkonošská, 468 61 Desná+420 488 117 525glassshop@preciosa.com50°45‘41 N, 15°19‘7 E

preciosa-ornela.comfacebook.com/PreciosaOrnela May 2016 © PRECIOSA ORNELA, a.s.

Traditional Czech Beads

preciosa-ornela.com © PRECIOSA ORNELA, a.s.

PRECIOSA ORNELA introduces beads and seed beadsfrom the PRECIOSA Traditional Czech BeadsTM brand.

DESIGN BY HELENA CHMELÍKOVÁ

SaKuraACCESSORIES MADE fROM PRECIOSA ChilliTM AND PRECIOSA TwinTM

Greeting Card You can glue the flowers onto decorative paper using a glue gun. Or, to sew them onto the paper, use a needle to make a series of two holes (one pair for each flower). Thread the holes from the back. Then thread one end through a T bead. Add 1 R8 bead. Thread the other end on the other side through a T bead. thread through the two holes again. Knot the thread and cut off the excess thread.

Decorative Branch Cut approx. 15 cm of binding wire. Bend in half. Add 1 R bead and place it in the bend. Add 1 R8 on each end, then add a flower. Bend the wires adn place the flower on the branch. Wind each end of wire around the branch once. Twist the wires several times under the flower.

Traditional Czech Beads

PRECIOSA RocaillesART No.: 331 19 001SIZE: 8/0, 10/0, 11/0

PRECIOSA TwinTM

ART No.: 117 01 323SIZE: 2.5 x 5 mm

PRECIOSA ChilliTM

ART No.: 111 01 357SIZE: 4 x 11 mm

document name: project-sakura.pdf May 2016 © preciosa-ornela.com

ACCESSORIES MADE fROM PRECIOSA ChilliTM AND PRECIOSA TwinTMACCESSORIES MADE fROM PRECIOSA ChilliTM AND PRECIOSA TwinTM

SaKuraSaKuraTraditional Czech Beads Traditional Czech Beads

PRECIOSA Rocaille (R8) 331 19 001; 8/0; quantity according to the selected itemWhite 46102

for Headband:headband wire; binding wire 0.30 mmFor Bracelet: 16 mm rivet; elastic (e.g. Opelon)For Card:decorative paper sheet; glue gunfor Branch:binding wire 0.30 mmNylon fishing line 0.20 mmfine needleScissorsflat-nosed pliers and cutting pliers

Difficulty:

Procedure:

Cherry Blossom Step 1Pass your needle through one hole of a T bead. Add 1 Ch bead using the dimpled hole closer to the bead’s center. Thread the other Ch hole from the back side. Pass your thread through the second T hole. Pass through the edge hole on Ch again, this time in its dimple. On the back, pass through the hole closer center as well. Turn the T bead so that its hole is level with the Ch hole. Pass through same hole in T as you did at the beginning, but in the opposite direction. Pick up 2 R beads.

Step 2Repeat STEP 1 four more times.

Step 3 Pass through the hole of the first T bead. Create a circle from the T and R beads. Pass through the second hole on the first T bead. Pass through the second holes on the remaining T beads as well. Pull the thread tightly, knot, and hide the thread’s ends into the surrounding beadwork.

Headband To make a headband you need 16 flowers. Place the binding wire onto the headband. Wrap the wires around each other approx. four times. Pass the binding wire through the bottom center of a flower. Add 1 R8 and 1 R. Return back through the R8 with the wire and tighten with the help of your flat-nosed pliers. Wind the wire around the headbands three times, and then add another flower. Continue this process until you have added allthe flowers. Wrap the end of the binding wire

The elongated, whimsical shape of the PRECIOSA Chilli™ complements our popular line of two-hole beads, both of which have the same hole spacing. Try this how-to guide and create a delicate cluster of blossoms reminiscent of a blooming sakura (cherry) tree. Choose from a wide range of PRECIOSA Traditional Czech Beads™ colors and make a delightful combination of flowers using two-hole beads, PRECIOSA Twin™ or PRECIOSA rocaille.

Materials and tools:

PRECIOSA ChilliTM (Ch) 111 01 357; 4 x 11 mm; warm pastel shades; 5 pcs for one flowerWhite 02010/25E01Cream 02010/25039Skin Tone 02010/29563Pinkish-Orange 02010/25007Pink 02010/25008Lilac 02010/29561

PRECIOSA TwinTM (T) 117 01 323; 2.5 x 5 mm; warm pastel shades; 5 pcs for one flowerWhite 02010/29571Skin Tone 02010/29563Pinkish-Orange02010/29560

PRECIOSA Rocaille (R) 331 19 001; 11/0 or 10/0; warm pastel shades; 10 pcs for one flower + more depending on item you are makingWhite 46102Cream 46112Skin Tone 37389Pink 37398Purple 37325Salmon 09351

around the headband several times between the binding wire and flowers.

Bracelet Use as many flowers as you need for the length of your bracelet. Using a rivet add 1 R8, a flower and then another R8. form loop with the rivet. Hold the end of the rivet with the flat-nosed pliers and wrap it around the plier tip. Thread the elastic through the rivet loops. In between each flower add 6 R8 seed beads. Knot the elastic’s ends together several times and cut off the remaining ends.

1. krok - začátek

1. krok - boční pohled šití Chilli a Twin

start side view of Chilli a Twin stitching

1. krok - pohled od zadní části Chilli

view from the back sideof the Chilli bead

view from the tipof the Chilli bead

end of the thread

3. krok