Get the big picture of your electricity useDo you really know how your facility is using energy? A monitoring and targeting (M&T) system can help you see exactly where and how electricity is being used throughout your building, in real time, so you can optimize your processes and systems while better managing your consumption.

TRACK YOUR ENERGY USE – GET RESULTS

GET FUNDING OF UP TO $75,000

Every business can benefit from a better understanding of its energy consumption. Use the data to understand which factors impact your costs. Then, use these insights to drive energy savings.

Track, uncover, act:

• Uncover hidden savings opportunities

• Detect energy waste, so you can fix problems right away

• Get real-time feedback, so you can track, adjust and test any changes

HYDRO ONE / ENERGY INNOVATORS

Monitoring and Targeting (M&T)

Many types of buildings can benefit from M&T, including:

• Industrial and manufacturing facilities

• Commercial buildings

• Municipal buildings

• Apartment complexes

• Hospitals and healthcare facilities

• Schools, colleges and universities

• Greenhouses and other agricultural buildings

• Hotels and motels

Subject to additional terms and conditions found at www.HydroOne.com/Business. Subject to change without notice. Save on Energy is powered by the Independent Electricity System Operator and brought to you by Hydro One Networks Inc. OMOfficial Mark of the Independent Electricity System Operator. Used under licence. The Hydro One & Design trademark is owned by Hydro One Inc. “Partners in Powerful Communities” is an Official Mark owned by Hydro One Networks Inc.

1-866-650-4709 SaveOnEnergy@HydroOne.comHydroOne.com/MandT

FPO

HYDRO ONE / ENERGY INNOVATORS

Monitoring and Targeting (M&T)

A process of continuous improvement

WHO IS THIS PROGRAM FOR?

Savings are everywhere – you just need to know where to find them. Here’s how an M&T system works:

MONITOR YOUR USAGECollect data by installing electricity meters on equipment that uses electricity. The more data points you add, the more insights you’ll uncover.

ANALYZE YOUR DATAGet real-time feedback, in easy to read graphs and charts, that can help alert you to any energy waste, trends or unusual patterns in energy consumption. Benchmark your consumption and then set performance targets.

ADJUST AND TEST PROCESSESUse the insights from your data to implement changes, solve problems or adjust processes. Test against performance targets to measure success.

FINE-TUNE AND OPTIMIZEThe advantage of tracking electricity usage in real-time is that you can continually make adjustments to refine and optimize your energy performance.

GET FUNDING FOR M&T

80%Get up to $75,000 (up to 80% of project costs) under the Process and Systems program.

Get up to 50% of project costs for savings achieved over 12 months under the Retrofit Program. Get $0.10/kWh.

up toup to

pRoJECt CoStS

pRoJECt CoStS50% or

1

2

3

4

HIRE AN ON-SITE ENERGY MANAGER

Hire a dedicated person to oversee your M&T system and get funding of up to $150,000 per year through the Energy Manager Program.