TR SERIES LŌDRIL LAD SERIES - … · Its telescoping kelly bars allow you to drill to depths of 90...
Transcript of TR SERIES LŌDRIL LAD SERIES - … · Its telescoping kelly bars allow you to drill to depths of 90...
1
TR SERIESLŌDRILLAD SERIESAERA
Foundation Drilling Equipment Manufacturing
3
ABOUT THE COMPANY ...................................................................................................................... 4
TR SERIES ...................................................................................................................................... 6
LŌDRIL ........................................................................................................................................ 12
LAD SERIES .................................................................................................................................. 18
AERA ........................................................................................................................................... 22
TABLE OF CONTENTS
5
IT ALL STARTS WITH THE FOUNDATION At Bay Shore Systems, we give customers around the world the extra advantage for
extreme and conventional foundation drilling. Since 1978, we’ve custom built tough,
reliable equipment for specialty drilling contractors, utilities and transmission line
companies, and general contractors—and 99 percent of our drills are still in use today.
Our commitmentIf you ask us, there’s no “average job” in construction and excavation. Each one is a new challenge, so it’s not enough to design and manufacture one-size-fits-all products. That’s why we build to your job. Your situation. Your timeframe.
24/7 Service If there’s a problem, our industry-leading service team will help you fix it, 24 hours a day. We’re proud of the fact that 95 percent of all service issues are resolved within 24 hours. Plus, your Product Support Sales Representative is dedicated to making your equipment run as profitably for you as possible by helping you make the right maintenance and service decisions.
Sigalarm authorized distributorTo help you get the most out of your rig, we’re proud to be an authorized distributor for SigalarmTM. It’s a solid state electronic safety system for detecting proximity to energized high-voltage overhead power lines, with both audible and visual warning signals that alert the operator and ground personnel.
95% OF ALL SERVICE ISSUES ARE RESOLVED WITHIN 24 HOURS
7
THE TR SERIES DRILL RIGS BRING POWER, DEPTH AND MORE FLEXIBILITY TO YOUR FLEETEngineered for high performance, reliability and productivity, the powerful TR Series
drills to depths of 100 feet (30 meters) and can be mounted to a truck, track or
excavator depending on the needs of your fleet.
It features comfortable, easy operation and a fully integrated kelly winch. And it’s 100 percent hydraulic with no torque converter and no transmission bringing you consistent operation from hole to hole. Some TR models come with separate side tilt and mast tilt functions to help set your rig quickly and precisely, while others have auto-level function to improve production. Look to TR for:
+ Rock drilling + Battered or raked holes
+ Typical foundation drilling + Power line and utility foundations
Truck mounted: Reduces environmental impact and costs by using truck’s engine. Leads to better visibility and reduced noise. Ease of movement from site to site with a truck base.
Track mounted: Highly efficient, with no outriggers to pull up and reset on every hole. Compact size for one load transport.
Excavator mounted: Full range and pivot of an excavator plus extra reach to get over a hole with a boom.
HYDRAULIC TORQUE UP TO AN UNSTOPPABLE 200,000 FT-LBS (270 KN-M) PLUS DRILLING DEPTHS OF UP TO 100 FEET (30 METERS)
TRUCK MOUNTED TRACK MOUNTED BOOM MOUNTED ALL TERRAIN TRACK MOUNTED
8
TR SERIES SPECS Units TR20 TR40 TR60 TR80 TR110 TR150 TR200
Rotary torque (max)ft-lbs
kN-m
21,500*
30
43,000
60
66,000
90
80,000
110
110,000
150
150,000
200
200,000
270
Kelly line winch pull (first layer, max)
lbs
kN
12,000
53
25,000*
110*
30,000*
130*
30,000*
130*
30,000
130
40,000
180
50,000*
220*
Hole diameter 1in
mm
48
1,200
84
2,100
108
2,700
132
3,300
144
3,600
168
4,200
168
4,200
Drill speed range (LHS) RPM 40/80/140* 40/80/140* 30/60/100 30/60/100 10/45/100 10/30/100 10/30/100
Hole depth (max) 2ft
m
60
18
80
24
80
24
80
24
100
30
80
24
80
24
Truck GVRW x 1000lbs
kg
50
23
60
27–
79
35
110
50– –
Truck GVW x 1000lbs
kg
45
20
50
23–
66
30
92
42– –
Excavator weight class x 1000 3lbs
kg
35-50
15-22
40-65
18-29
50-95
24-45
65-95
29-45
75-100
35-45
100
45
100-145
45-65
Truck mount PTO power (max)HP
kW
200
150
200
150–
245
180
275
205– –
HPU engine power (max)HP
kW
180*
135*
250*
158*
250
158
250
158
300
220
350
260
400
300
*With upgrade1Dependent on ground conditions, tooling and operation2Dependent on configuration 3Excavator modifications may be required or anticipated
Need more options? We’ll custom engineer the right rig for you.
TR Series upgrades
+ Square kelly bar upgrades, with a choice of three grades of material + Kelly winch upgrade to a larger winch for maximum hoisting + Add a service winch to make tool changes quick and convenient + Round, self-locking kellys to increase crowd force in hard drilling conditions
+ Reaction jack in combination with round, self-locking kellys to handle tough rock
+ Power line detector that sounds when you’re close to live overhead lines + Boom modification to maximize the size of the TR you can put on a smaller excavator
+ Telescoping boom to work out further beyond the tracks or increase crowd force and flexibility
+ Quick disconnect to easily remove the TR from the excavator
FIND THE TR SERIES RIG THAT’S RIGHT FOR YOU
9
“ OUR NEW TR RIG IS THE PERFECT COMBINATION OF POWER AND VERSATILITY. TRANSPORT AND SETUP IS EFFICIENT AND ECONOMICAL. PAIRED WITH BAY SHORE’S IMMEDIATE AND ALWAYS AVAILABLE TECHNICAL SUPPORT, IT’S TOUGH TO BEAT.” Andy Shorten, Greg Bair Track Hoe Service
13
LOW OVERHEAD DRILLING
THE LŌDRIL GETS YOU THE JOBS YOUR COMPETITORS CAN’T GET The LōDril® is a versatile, powerful excavator-mounted foundation drill for traditional
and extreme jobs.
Its telescoping kelly bars allow you to drill to depths of 90 feet (27 meters) under severe overhead restrictions with a very low profile attachment—even in the most unfriendly conditions. We’ll build your LōDril to the specific requirements of your job—but it’ll take you far beyond that. We’ve built more than 600 LōDrils, and 99 percent of them are still in use today, including the first one! Whether you purchase a new excavator or mount it on an existing one in your fleet, your LōDril will be engineered for the base machine that makes the most sense for you. Look to LōDril for extreme projects like:
+ Inside buildings + Large diameter holes + On slopes
+ On uneven or rough terrain + Over casing + Over obstacles
+ Under bridges + Under power lines
HYDRAULIC TORQUE UP TO 65,000 FT-LBS (95 KN-M) PLUS DRILLING DEPTHS OF UP TO 90 FEET (27 METERS)
ON SLOPE DRILLING DRILLING WITH CASING LONG AUGER DRILLING
OVER OBSTACLE DRILLING UNLEVEL TERRAIN DRILLING
14
LōDril upgrades
+ Kelly bar upgrades, with a choice of three grades of material + Kelly winch upgrade to a larger winch for maximum hoisting + Add a service winch to make tool changes quick and convenient + Round, self-locking kellys to increase crowd force in hard drilling conditions
+ Reaction jack in combination with round, self-locking kellys to handle tough rock
+ Power line detector that sounds when you’re close to live overhead lines + Boom modification to maximize the size of the LōDril you can put on a smaller excavator
+ Telescoping boom to work out further beyond the tracks or increase crowd force and flexibility
+ Quick disconnect to easily remove the LōDril from the excavator
LŌDRIL SPECS Units DH15 DH20 DH30 DH40 DH60
Rotary torque (max) 1ft-lbs
kN-m
15,000
20
21,500
30
30,000
40
43,000
60
66,000
90
Kelly winch line pull (first layer, max)
lbs
kN
8,000
35
12,000
53
18,000
80
25,000*
110*
30,000*
130*
Hole diameter 2in
mm
36
900
48
1,200
60
1,500
84
2,100
108
2,700
Drill speed range (LHS) 3 RPM 30/60/100 30/60/100 40/100/140* 30/60/100 30/60/100
Hole depth (max) 4ft
m
80
24
80
24
80
24
80
24
90
27
Attachment height 4ft
m
9-21
2.7-6.4
10-21
3.0-6.4
16-26
4.9-8.0
14-26
4.3-8.0
17-32
5.2-9.8
Excavator weight class x 1000 5lbs
kg
16-35
7-15
35-50
15-22
50-65
22-29
50-65
22-29
70-95
32-43
FIND THE LŌDRIL RIG THAT’S RIGHT FOR YOU
Need more options? We’ll custom engineer the right rig for you.
*With upgrade1Running torque at low drill speed2Dependent on ground conditions, tooling and operation3Dependent on excavator4LōDril configuration specific5Excavator modifications may be required
15
“ IF YOU WANT TO BE WOWED, THEN YOU NEED TO ADD A LŌDRIL TO YOUR FLEET.” Gene E. Sheedy, President, Midwest Drilling Foundations & Engineering, Inc.
19
THE LAD SERIES DRILLS GET YOU INTO TIGHT SPOTS—AND OUT AGAINThe LAD Series was specially designed to bring deep-drilling capabilities to severely
restricted-access jobs.
With attachment heights as short as 6.5 feet (2 meters), these small rigs can drill to depths of 70 feet (21 meters), combined with a wide torque range allowing you to make quick work of tough soil conditions. The LAD Series’ drilling speeds crush the competition’s, maintaining high torque ratings at higher drill speeds, significantly increasing your daily production. Compared with some other limited-access drills on the market, the LAD Series beats them on rotary torque and headroom clearance, too. Look to the LAD Series when the job isn’t easy:
+ Residential foundations + Elevator shafts + Engineered landscape projects
+ Substations + Power lines + Inside buildings
DRILL SPEEDS UP TO 100 RPM, PLUS DRILLING DEPTHS OF UP TO 70 FEET (21 METERS)
20
LAD SERIES SPECS Units LAD50 LAD80 LAD100 LAD250 LAD400
Rotary torque (max)ft-lbs
kN-m
5,000
7
8,000
11
10,000
14
25,000
34
40,000
54
Kelly winch line pull (first layer, max)
lbs
kN
5,000
22
5,000
22
8,000
35
12,000
53
18,000
80
Hole diameter 1in
mm
32
750
36
900
42
1,050
54
1,370
84
2,100
Drill speed range (LHS) RPM 20/60/100 30/60/100 30/60/100 30/60/100 30/60/100
Hole depth (max) 2ft
m
40
12
50
15
70
21
50
15
60
18
Attachment height 2ft
m
8
2.4
6.5
2
8
2.4
9.5
2.9
11
3.4
Excavator weight class x 1000 3lbs
kg
12-16
5.5-7
16-29
7-13
18-31
8-15
31-50
15-22
40-65
18-29
FIND THE LAD SERIES RIG THAT’S RIGHT FOR YOU
Need more options? We’ll custom engineer the right rig for you.
1Dependent on ground conditions, tooling and operation2Dependent on configuration3Excavator modifications may be required or anticipated
21
“ WE HAVE PUT THE LAD100 IN THE TIGHTEST SPACES AND THROUGH THE MOST TREACHEROUS TERRAIN ... THIS RIG HAS COME OUT ON TOP EVERY TIME AND PROVEN ITSELF TO BE THE MOST WIDELY USED AND PROFITABLE RIG WE OWN.” Mike Duffey, Kindness General Contractors, Inc.
23
ONE FLEXIBLE, POWERFUL RIG. MANY APPLICATIONS.The AERA (Articulated Earth Retention Attachment) is an excavator-mounted drilling
rig that will outperform other rigs on everything from wide open spaces to obstacles
to slopes.
Whether you need a long-stroke, single-pass machine, or a short-stroke rig to replace your conventional crawler, the AERA’s unsurpassed mast articulation, in-cab controls for comfort and endless customization options mean productivity and profits for the long haul. The AERA’s versatility can help you tackle a wide variety of profitable projects. Quick between holes and efficient over the hole, the AERA will make you raise your hand for jobs you’ve overlooked in the past. The AERA performs when tackling:
+ Micropiles + Jet grouting + Seismic retrofit
+ Tiebacks + Wick drains + Slope stabilization
+ Soil nails + Geothermal
ROTARY SPEED UP TO 100 RPM PLUS MINIMUM BENCH AS LOW AS 12 FEET (3.5 METERS)
SIDE VIEW TOP VIEWFRONT VIEW
24FIND THE AERA RIG THAT’S RIGHT FOR YOU
AERA SMALL BORE SPECS
Units 1008 1420 1430 1440
Strokeft 8 20 30 40
m 2.5 6 9 12
Minimum benchft 8 11 11 12
m 2.5 3 3 3.5
Feed system*
Type Cylinder Motor Motor Motor
Crowdlbs 6,600 12,000 12,000 12,000
kN 30 50 50 50
Pullbacklbs 6,600 12,000 12,000 12,000
kN 30 50 50 50
Mast scopeft 2 4 4 4
mm 600 1,200 1,200 1,200
Operating dimensions
Dim Aft 17.9 31.3 41.3 51.3
mm 5,455 9,590 12,590 15,635
Dim Bft 11.7 12.5 12.5 13.2
mm 3,565 3,810 3,810 4,025
Dim C degrees 210 210 210 210
Dim D degrees 95 95 95 95
Dim Eft 7.2 9.1 9.1 9.1
mm 2,195 2,775 2,775 2,775
Transport specs
Heightft 10.5 11.5 11.5 11.5
mm 3,200 3,505 3,505 3,505
Lengthft 23.7 35.5 45.5 55.5
mm 7,225 10,820 13,870 16,915
Widthft 8.5 8.5 10.5 11.1
mm 2,590 2,590 3,200 3,385
Weightlbs 35,000 58,000 62,000 66,000
kg 15,900 26,400 28,200 30,000
Excavator class
Weightlbs 20,000 30,000 40,000 40,000
kg 9,100 13,600 20,000 20,000
PowerHP 80 125 140 150
kW 59 57 64 68
25
*Specifications may be limited by excavator engine power
AERA upgrades
+ Rotary head, percussion head or double-head configuration options + Add a rotary off hole slide or rotary off axis swing to make tool installation a breeze
+ Service winch to easily handle tooling + Wide range of clamps, including blocking, breakout and pullback clamps + Inclination/stroke indicator for accurate read-outs so you’ll always produce the appropriate hole
+ Boom modifications to maximize the size of the AERA + Telescoping boom to enhance flexibility + Water pumps to flush or control dust from tooling + Hydraulic chuck for jet grouting + Rod changer to increase the depth capacity + Dual feed system for full mast lower and upper rotary feed control
Need more options? We’ll custom engineer the right rig for you.
AERA SMALL BORE ROTARY SPECS
ROTARY HEAD MODEL Units HS8 HS10 HS12 HS14 HS18
Torque (max)ft-lbs
kN-m
8,000
11
10,000
14
12,000
16
14,000
19
18,000
24
Pressure (max)psi
bar
2,900
200
4,400
300
2,400
165
3,200
220
3,500
240
Speed (max) RPM 100 100 40 60 60
Weightlbs
kg
450
205
600
270
265
120
1,000
455
1,100
500
26
“ WE HAD A PROBLEM WITH OUR RIG ON ITS MAIDEN VOYAGE: WE UNDERESTIMATED THE PRODUCTION OF THE AERA 1440. WE HAD TO MAN UP TO KEEP UP—THIS WAS A GOOD PROBLEM TO HAVE.” Kim Coffey, Beaty Construction, Inc.
28
Send us an emailSales: [email protected] service: [email protected]
Stop by for a visitBay Shore Systems, Inc.14206 North Ohio StreetRathdrum, ID 83858bayshoresystems.com
Give us a callToll free (888) 569-3745 Local (208) 687-3311Fax (208) 687-4153New Zealand/Australia +61 408 805 757
24/7 service Toll free (888) 569-3745Local (208) 687-3311After hours (208) 446-4691
US Offices: Dallas, TX | Miami, FL | Atlanta, GA | Boston, MA | Rathdrum, ID (headquarters)
International Office: Sydney, Australia