TPC FZE - PROCESS PACKAGES - Technical Parts · PDF fileBIOCIDE INJECTION UNITS ... TPC FZE -...

TPC FZE - PROCESS PACKAGES P.O. Box : 1275, Jebel Ali, Dubai, United Arab Emirates

Tel : +971 4 8132750, Fax : +971 4 8864125E-mail : [email protected]

Dear Customer,

TPC FZE - a part of Bhatia Brothers Group of Companies was established more than four

decades ago. It has been serving the dynamic, vibrant and aggressive needs of the Oil &

Gas, Water, Power and Marine Industries in the region.

In the last four decades, TPC FZE has transformed into an "ONE STOP SOLUTION"

provider with a huge clientele to its credit spanning all across the Middle East, Africa and

the Indian Sub-continent.

We, at the Process Packages Division of TPC FZE are dedicated to serve the Oil & Gas

Industry with world class products and packages.

A work force of more than 100 employees with Sales, Engineering, Design & Drafting skills,

a massive multi-million dollar inventory of piping and instrumentation bulk material and an

ASME "U" stamp qualified workshop within the Group provides us the competitive

advantage to stay ahead of our competitors.

TPC FZE together with its Principals is here in the market to meet and exceed your

expectations. Do offer us an opportunity to work with you.

ELECTRICAL CHEMICAL INJECTION PACKAGES

• API 675 plunger, control volume pumps with high accuracy

and head multiplexing capability, flow rates from 0.04 – 83

LPH & process pressure up to 9000 PSIG.

• Diaphragm pumps with high particle tolerance and low

pulsation, flow rates 0.04 – 8403 LPH, process pressure up

to 2500 PSIG.

• Flow rate adjustment through eccentric stroke length

reducer OR through VFD.

• Can be provided with a PLC & flow ratio controllers, with

Local chemical flow meters.

• Ability to measure low chemical flow rates ( min. 1.0 - 1.5

• Full system is ATEX approved & suitable for hazardous

• Can be provided with process analyzers like PH, ORP,

Conductivity and Chlorine analyzer.

• Chemical tanks as per ASME VIII

INTRODUCTION

Dear Customer,

TPC FZE - a part of Bhatia Brothers Group of Companies was established more than four

decades ago. It has been serving the dynamic, vibrant and aggressive needs of the Oil &

Gas, Water, Power and Marine Industries in the region.

In the last four decades, TPC FZE has transformed into an "ONE STOP SOLUTION"

provider with a huge clientele to its credit spanning all across the Middle East, Africa and

the Indian Sub-continent.

We, at the Process Packages Division of TPC FZE are dedicated to serve the Oil & Gas

Industry with world class products and packages.

A work force of more than 100 employees with Sales, Engineering, Design & Drafting skills,

a massive multi-million dollar inventory of piping and instrumentation bulk material and an

ASME "U" stamp qualified workshop within the Group provides us the competitive

advantage to stay ahead of our competitors.

TPC FZE together with its Principals is here in the market to meet and exceed your

expectations. Do offer us an opportunity to work with you.

ELECTRICAL CHEMICAL INJECTION PACKAGES

• API 675 plunger, control volume pumps with high accuracy

and head multiplexing capability, flow rates from 0.04 – 83

LPH & process pressure up to 9000 PSIG.

• Diaphragm pumps with high particle tolerance and low

pulsation, flow rates 0.04 – 8403 LPH, process pressure up

to 2500 PSIG.

• Flow rate adjustment through eccentric stroke length

reducer OR through VFD.

• Can be provided with a PLC & flow ratio controllers, with

Local chemical flow meters.

• Ability to measure low chemical flow rates ( min. 1.0 - 1.5

• Full system is ATEX approved & suitable for hazardous

• Can be provided with process analyzers like PH, ORP,

Conductivity and Chlorine analyzer.

• Chemical tanks as per ASME VIII

INTRODUCTION

• Pneumatically powered & gas driven positive displacement reciprocating injection pumps.

• Flow rates from 0.02 to 1800 LPH & process pressure up to 20,000 PSIG.

• Different configuration for the pumps on chemical injection packages

• Chemical tanks up to 10,000 lit in different material of construction & types depend on the chemical specifications.

• Single & Double acting pumps

• ATEX certified for the complete system.

• Manual and automated flow control.

• Multi-point injection systems

• Chemical loading / unloading diaphragm pumps.

BIOCIDE INJECTION UNITS

• Biocide units for chemical conditioning of cooling water systems.

• Conductivity & turbidity control through conductivity analyzer and permanent bleed system of water.

• Chlorine injection, automatically controlled, through a dosing pump or a BROMINATOR.

• Automatic PH control.

• Containerized & insulated panels with temperature control.

• Hydraulic test units up to 40,000 PSIG, with high pressure fittings & valves.

• Portable units for remote area.

• Gas test units

• Double acting high flow & high pressure, hydraulic test pumps & chemical injection pumps. Can give flow rate of 200 LPH @ 12,000 PSIG.

• Coming with mechanical or electronic, pressure or temperature chart recorders.

• GAS booster units for different applications.

• Power packages for hydraulic oil.

HYDRAULIC PRESSURE TESTING UNITS PNEUMATIC & GAS DRIVEN INJECTION PACKAGES

• System utilized external solar panels to charge high performance batteries, which energies as DC motors on the pumps or on the air compressor.

• 50 to 120 Watt PV panel (may be remotely mounted)

• Weather proof enclosures

• Flow rates between 0.4 and 6.3 G / day up to 1500 psig.

• Continuously working, 24 hr / day

SOLAR SYSTEM WITH ELECTRICAL & PNEUMATIC PUMPS

• Pneumatically powered & gas driven positive displacement reciprocating injection pumps.

• Flow rates from 0.02 to 1800 LPH & process pressure up to 20,000 PSIG.

• Different configuration for the pumps on chemical injection packages

• Chemical tanks up to 10,000 lit in different material of construction & types depend on the chemical specifications.

• Single & Double acting pumps

• ATEX certified for the complete system.

• Manual and automated flow control.

• Multi-point injection systems

• Chemical loading / unloading diaphragm pumps.

BIOCIDE INJECTION UNITS

• Biocide units for chemical conditioning of cooling water systems.

• Conductivity & turbidity control through conductivity analyzer and permanent bleed system of water.

• Chlorine injection, automatically controlled, through a dosing pump or a BROMINATOR.

• Automatic PH control.

• Containerized & insulated panels with temperature control.

• Hydraulic test units up to 40,000 PSIG, with high pressure fittings & valves.

• Portable units for remote area.

• Gas test units

• Double acting high flow & high pressure, hydraulic test pumps & chemical injection pumps. Can give flow rate of 200 LPH @ 12,000 PSIG.

• Coming with mechanical or electronic, pressure or temperature chart recorders.

• GAS booster units for different applications.

• Power packages for hydraulic oil.

HYDRAULIC PRESSURE TESTING UNITS PNEUMATIC & GAS DRIVEN INJECTION PACKAGES

• System utilized external solar panels to charge high performance batteries, which energies as DC motors on the pumps or on the air compressor.

• 50 to 120 Watt PV panel (may be remotely mounted)

• Weather proof enclosures

• Flow rates between 0.4 and 6.3 G / day up to 1500 psig.

• Continuously working, 24 hr / day

SOLAR SYSTEM WITH ELECTRICAL & PNEUMATIC PUMPS

METERING SKIDS WELL HEAD CONTROL PANELS (WHCP)

• Hydraulic & pneumatic control panels for the well head & down-hole valves.

• Control systems that meet all International standards and codes.

• System pressure up to 20,000 PSIG.

• Electrically OR hydraulically controlled.

• Portable units OR modular multi well control panels.

• PLC based systems

DRUG REDUCING / POLYMERS INJECTION SKID

• Pneumatically & electrically driven injection pumps.

• Ability to inject the high viscosity agent / polymer in a range of 500 – 2000 cP.

• Using either pneumatic (double diaphragm) & electrical (with variable speed driver) booster pump.

• Can give DRA Flow rate of 200 LPH @ 5400 PSIG.

FUEL GAS CONDITIONING SKIDS

These units are designed to deliver clean & treated natural or

associated fuel gas to the gas turbines.

The fuel gas is super heated above the hydrocarbon and

water dew point.

The system includes:

• Gas filters

• Electrical or steam heaters

• Dew point analyzing system

• Control panels

• PLC systems

• All the required instruments for safe operation

TPC FZE / C&J provides integrated measurement solutions

tailored to specific projects or applications. Ultrasonic Meters for

clean gas & liquid metering, Multiphase Metering & Mass

Metering for high viscous oil.

Offers a compact manifold design combining production & test

manifold in one unit.

The Multi Port Selector manifold will greatly reduce the size of

pipe manifolds arrangement & simplify the control requirement.

MULTI PORT SELECTOR VALVE SKIDS