TPA Traditional HD Panel
-
Upload
tpa-portable-roadways -
Category
Documents
-
view
215 -
download
0
description
Transcript of TPA Traditional HD Panel
Available for Hire NATIONWIDE Hire Desk: 0870 240 2381 TPA Product Profile
HD Panel
Ready to get you access to anywhere... TPA’s commitment to the research and development of its products has resulted in the best portable roadway systems on the market today.
Our unique captive nut design links the panels together in a secure fashion, which is a vital consideration if the installation is taking place at a remote or vulnerable site. The reduction of slips, trips and falls is imperative for some clients, particularly at events and festivals.
Designed To Look After Your Contract.• 3m Wide load bearing temporary access roadway & walkway for all ground conditions• Structurally designed box sections for maximum strength & durability• Rapid deployment - quick and easy to install
Unrivalled Application & Capability• Large Stockholding of traditional aluminium panel systems• Suitable for a vast spectrum of ground conditions and access requirements• Strength by design ensures suitability for a diverse weight range
Hea
vy D
uty
Pane
lSuitable for:
Portable Roadway HD Panel
InnovativeThe box section has two sides, 1) low profile side (pedestrian friendly) and 2) high profile side (giving high mechanical grip).
ProtectiveThe HD Panel is primarily used to provide a 3.0 metre wide load bearing temporary access road for all ground conditions. Its load distribution properties allow the heaviest vehicle to travel on the softest ground safely.
ConstructionThe width and configuration of the HD panel temporary road is variable depending on site conditions / allowable bearing pressure and the total load to be carried.
QuickA system of 50 liner meters can be fitted by 2 people in 1 to 2 hours.
Specifications HighlightsDimensions• Product Dimensions (Width x Length): 3000mm x 2450mm (+/- 2mm)
Square Meter• 7.35mtr sq
Box Section Properties• Width of section = 260mm • Depth of section = 52mm
Weight• 270kg per panel
Material• 6063 T6 Grade Aluminium• Limiting stress for bending and overall yielding=160 n/mm2• Limiting stress for local capacity of the section in tension or compression = 175 n/mm2• Limiting stress in shear = 95 n/mm2
Load Bearing Capacity• 250 tonne point load• 1000 tonne gross train weight over ground 2% CBR
Temperature Range• -5OC to 50OC • 22OF to 120OF
Fire Requirements• See separate Fire Test Report
Colour• Bare Aluminium
Installation Time• 50 linear metres can be installed in 1-2 hours per crew
© 2015 TPA Portable Roadways LimitedAll Rights reserved
Specifications are subject to change without noticeTrademarks are the property of TPA Portable Roadways Limited or their respective owners.
Issue date 02/07/2015
Version 1.4
W: www.tpa-ltd.co.uk T: 0870 240 2381 E: [email protected]