Totem VDRTotem VDR

Following IMO regulations and SOLAS requirements for VDR, certain classes of vessels are required to install VDR units by July 2002.

Totem VDR meets and exceeds IMO Performance standard A.861 (20), IEC 61996, IEC 60945 and IEC 61162-1.

Totem VDR is approved by DNV.

Totem VDR (Cont.)Totem VDR (Cont.)

Totem VDR consists of:

• Protective Memory Capsule (PMC) mounted on deck, where it can be easily retrieved by divers or ROV’s following an incident. Totem PMC rugged design exceeded IEC 60945 requirements for marine going equipment

• Main Unit cabinet, placed inside the ship’s bridge, containing a computer (PC), a monitor and UPS (Un- interrupted Power Supply).

• Replay software, which enables the retrieval and the display of all recorded data is included as a standard feature of the Totem VDR system.

Totem VDR Block DiagramTotem VDR Block DiagramSystem Overview

VDR on board of a New Building

The VDR Protective Memory CapsuleThe VDR Protective Memory Capsule

• Contains 2Gb flash disk, Ultrasonic location beacon, 2 handles, and 1 cable connection socket.

• Stores data of the last 12 hours on a final recording medium inside the PMC.

• Special storage capsule protects the final recording medium.

• Designed to withstand the extreme shock, heavy impact, high pressure and heat, which could be associated with a maritime incident. • Easy installation on deck by 2 simple 300mm welding.

• Cabinet contains Main Unit computer (PC), 15” monitor, keyboard, mouse and UPS (Uninterrupted Power Supply).

• PC contains CD-W for saving data on a CD (e.g. saving non catastrophic events).

• UPS backup provides at least 2 hours continuous recording following a blackout.

• Keyboard is locked inside the cabinet - only authorized personal using a password can operate it.

• Lower portion of cabinet, reserved for cables and terminals, provides easy installation and maintenance.

VDR - Main Unit CabinetVDR - Main Unit Cabinet

Totem VDR – System HighlightsTotem VDR – System Highlights

• Eight (8) independent single audio channels, NO MIXING of Audio channels.

• Main Unit’s PC is connected through Ethernet cable to the Totem PMC.

• Integral CD-W (CD writer) in PC for saving of non- catastrophic data.

• PC monitor displays status of recorded items at all times (Redundant IBS – Integrated Bridge System – information).

• Redundancy – data stored on both hard disk (of PC) and on final recording medium (inside the PMC).

VDR-Recording InputsVDR-Recording Inputs

The following items are recorded (as per IMO Resolution .861(20):

Date and Time Main Alarms (IMO Mandatory Bridge Alarms)

Ship’s Position Rudder Order and Response

Speed Engine Order and Response

Heading Hull Openings (Doors) Status

Bridge Audio Watertight and Fire Doors Status

Communication Audio Acceleration and Hull Stresses (if available)

Radar Data – post display selection Wind Speed and Direction

Echo Sounder

Totem VDR - Main ScreenTotem VDR - Main ScreenRedundant IBS

Information

Save Non-Catastrophic Events ScreenSave Non-Catastrophic Events Screen

Data saving and deletion is possible

at any time

Data can be saved on a CD or on the computer’s hard

drive

System Configuration ScreenSystem Configuration Screen

Displays system configuration as entered during

installation

Alarms Screen Alarms Screen

VDR PasswordVDR Password

Menu options are restricted to authorized persons only, requiring

a username and a password

Always on top

Totem VDR AdvantagesTotem VDR Advantages

• Novel design allows for affordable cost.

• Open architecture design based on PC technology easily adapted to suit any type of vessel.

• Fast installation on new buildings or retrofit, based on product simplicity and Totem Plus experience in Automation and Monitoring Systems.

• Easy setup during installation.

• Faster annual inspection then most VDR’s in the market.

Totem VDR Advantages (Cont.)Totem VDR Advantages (Cont.)

• Data can be saved for much longer periods than the mandatory 12 hours on the PC’s hard disk (suitable for owners use).

• Easy expansion of binary or analog inputs – built in Siemens S7 PLC (14 binary inputs included as standard).

• Replay software module for both ship and office is included as standard.

• The PMC is manufactured by Totem Plus eliminating the need to rely on a third party and insures conforming to the highest standards without compromising.

• The replay software enables retrieval and display of all

recorded data.

• Current data (e.g. non-catastrophic data) can be saved in a

file and displayed on a dedicated PC onboard (or sent to the

head office).

• The stored data can be analyzed for incident investigation

and performance monitoring, for crew training and

analysis of ship’s operation.

• Data can be displayed on most major Electronic Chart

Display units (ECDIS).

Replay and Analysis SoftwareReplay and Analysis Software

Replay software – Main ScreenReplay software – Main Screen

Enables the selection of saved

data type to be replayed

individually or simultaneously

Replay of Recorded Radar PicturesReplay of Recorded Radar Pictures

Radar pictures in the saved file can be advanced manually

or automatically (fast forward)

Navigation information in a tabular formNavigation information in a tabular form

Information in the saved

navigation files is presented in

tables

Replay of Recorded AudioReplay of Recorded Audio

Saved Audio files can be replayed using any

MP3 media player program or the built-

in Voice Replay program

Multiple Information ScreenMultiple Information Screen

View Radar pictures, listen to the Audio

channels and view the navigational information

simultaneously. The recorded times are

automatically synchronized

Totem Plus at a glanceTotem Plus at a glance

Totem Plus goal is to create modern, reliable and affordable systems.

It has been developing ship automation and marine computerized applications

since 1994 and was one of the pioneers in integrating several systems into one

control system.

The Unique array of products developed by Totem Plus leads to easy

integration of several systems into one control system.

Totem Plus supports a global network of representatives and a considerable

installation base.

Quality assurance is under the assessment of DNV’s - ISO 9001.

Totem Plus Products at a glanceTotem Plus Products at a glance

Additional products:

1. Engine Alarm, Monitoring and Control Systems. (IMACS)

2. Loading programs (stress and stability) and Emergency

Response programs. (LoadMate)

3. Integrated Tank Gauging systems with its unique built in

loading program. (TankMate)

4. Dry Dock Organizer and automatic specification report

generator. (DDO)

Thank you Please contact us with any technical or commercial questions at:

Totem Plus

29 Sokolov St.

POB 164 Herzliya 46100,

ISRAEL

Phone: + 972-9-9572458

Fax: + 972-9-9562018www.TotemPlus.com

Rua Voluntários da Pátria 190/402Rio de Janeiro – RJCEP 22270-010Tel.: (21) 9982-6015Fax: (21) 2535-8289www.autosense.com.brcomercial@autosense.com.br