TORCHES & CONSUMABLES PLASMA CUTTING...LTE-150 EASY FIT – Suitable for CEBORA® P150 & CP160 Part...
Transcript of TORCHES & CONSUMABLES PLASMA CUTTING...LTE-150 EASY FIT – Suitable for CEBORA® P150 & CP160 Part...
PLASMA CUTTING
TORCHES & CONSUM
ABLES6
Sourced in Europe by a world leading plasma cutting manufacturer.
Sophisticated CNC machines allow for very accurate tolerances and high standards of quality control.
Torch packages and heads are individually tested to ensure maximum reliability.
WHY OUR PLASMATORCHES?
DISCLAIMERWe are in no way connected to or affiliated with any of the manufacturers referred to in the PLASMA section of this catalogue.
None of the equipment listed in this PLASMA section originates from the manufacturer with whose products it is compatible.
In this PLASMA section, the use of:
(i) original equipment manufacturer’s part numbers and/or
(ii) any manufacturer’s registered or unregistered trade marks is solely to indicate that the intended purpose of the equipment in question is to act as a spare part and/or accessory for the relevant original equipment.
LTE EASY FIT TORCHES 220
SWP PLASMA TORCHES 221-227
CEBORA COMPATIBLE TORCHES AND CONSUMABLES 228-235
TRAFIMET COMPATIBLE TORCHES AND CONSUMABLES 236-247
LINCOLN COMPATIBLE TORCHES AND CONSUMABLES 248-251
BINZEL COMPATIBLE CONSUMABLES 252
TELWIN COMPATIBLE CONSUMABLES 253
THERMADYNE COMPATIBLE TORCHES AND CONSUMABLES 254-258
HYPERTHERM COMPATIBLE CONSUMABLES 259-265
ESAB / L-TEC COMPATIBLE CONSUMABLES 266
PARWELD COMPATIBLE CONSUMABLES 267
SAF COMPATIBLE CONSUMABLES 268
MILLER COMPATIBLE CONSUMABLES 269-270
CONNECTORS 271
CIRCLE CUTTING KITS & ADJUSTMENTS 272
6CONTENTS
LTE TORCHES – EASY FIT
LTE-120 EASY FIT – Suitable for LINCOLN® T100
Part No. Description
01201E LTE-120H Hand Torch Head, c/w handle and parts
01400E LTE-120M Machine Torch Head, c/w positioning tube and parts
09781FX Lead Assembly, 6m (20 ft) Coaxial Cable (central connector)
05285FX Extension, 6m (20 ft), complete with Coaxial Cable
For detailed consumables breakdown – see page 250-251
LTE-150 EASY FIT – Suitable for CEBORA® P150 & CP160
Part No. Description
02001E LTE-150H Hand Torch Head, c/w handle and parts
04300E LTE-150M Machine Torch Head, c/w positioning tube and parts
09781FX-C Lead Assembly, 6m (20 ft) Coaxial Cable (central connector)
05285FX Extension, 6m (20 ft), complete with Coaxial Cable
For detailed consumables breakdown – see page 234-235
LTE-81 EASY FIT – Suitable for TRAFIMET®A80 &A81
Part No. Description
06802E LTE-120H Hand Torch Head, c/w handle and parts
06811E LTE-120M Machine Torch Head, c/w positioning tube and parts
09781FX-T Lead Assembly, 6m (20 ft) Coaxial Cable (central connector)
05285FX Extension, 6m (20 ft), complete with Coaxial Cable
For detailed consumables breakdown – see page 238-239
220
LTE-120 EASY FIT – Suitable for TRAFIMET®A90 &A101
Part No. Description
06001E LTE-101H Hand Torch Head, c/w handle and parts
06600E LTE-101M Machine Torch Head, c/w positioning tube and parts
09781FX-T Lead Assembly, 6m (20 ft) Coaxial Cable (central connector)
05285FX Extension, 6m (20 ft), complete with Coaxial Cable
For detailed consumables breakdown – see page 240-241
LTE-141 EASY FIT – Suitable for TRAFIMET®A140 &A141
Part No. Description
06201E LTE-141H Hand Torch Head, c/w handle and parts
06400E LTE-141M Machine Torch Head, c/w positioning tube and parts
09781FX-T Lead Assembly, 6m (20 ft) Coaxial Cable (central connector)
05285FX Extension, 6m (20 ft), complete with Coaxial Cable
For detailed consumables breakdown – see page 242-243
LTE-151 EASY FIT – Suitable for TRAFIMET® R135 &A151
Part No. Description
06901E LTE-151H Hand Torch Head, c/w handle and parts
06910E LTE-151M Machine Torch Head, c/w positioning tube and parts
09781FX-T Lead Assembly, 6m (20 ft) Coaxial Cable (central connector)
05285FX Extension, 6m (20 ft), complete with Coaxial Cable
For detailed consumables breakdown – see page 246-247
PLAS
MA
CUTT
ING
CUT 40 / CUT 40C SWP PLASMA TORCH
221
Air Flow: 90 lpm x Rating: 40A @ 60% duty cycle x Cutting Capacity: 10mm max (most materials)Gas: Single
CUT 40 TORCH PACKAGEPart No. Description
PC4006 Hand Torch c/w 6m Cables 1/4" BSP External Connection
CUT 40C TORCH PACKAGEPart No. Description
PA165 Hand Torch c/w 4m Cables 1/4" BSP External Connection
CONSUMABLES
MAIN CONSUMABLES
Item Part No. Description Qty
1 S2501 Torch Head 1
2 PE106 Swirl Ring 1
3 PR105 Electrode 5
4 PD102 Tip 1.0mm 5
5 PR110 Electrode 5
6 PD116-06 Tip 0.65mm 5
PD116-08 Tip 0.8mm 5
7 PR106 Extended Electrode 5
8 PD103-09 Extended Tip 0.9mm 5
9 PC116 Nozzle Retaining Cap 1
10 S2504 Handle Only – No Switch 1
11 PC7016 Switch 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
12 PC4060 6m Complete Cable Assembly – 1/4" BSP 1
13 PC4001 2 Pin Plug 1
2
3
4
5
8
7
12
11
10
6
9
Cut 40 Termination
13
1
12
CABLE FITTING 1/4"
Cut 40C Termination
PLASMA
CUTTING
CUT 40B & DIGI-CUT 40M DV SWP PLASMA TORCH
222
Air Flow: 120 lpm x Rating: 50A @ 60% duty cycle x Cutting Capacity: 12mm max (most materials)Gas: Single
CUT 40B & DIGI CUT 40M DV TORCH PACKAGEPart No. Description
C1574 Hand Torch c/w 6m Cables Central Connection
CONSUMABLES
MAIN CONSUMABLES
Item Part No. Description Qty
1 C1352 Torch Head 1
2 C3160067 O-Ring – Torch Head 10
3 C1521 Hafnium Electrode 5
4 C1510 Swirl Ring 1
5 C1304 Cutting Tip 1.0mm – Flat 5
6 C1305 Cutting Tip 1.0mm – Conical 5
7 C5.710.121 Nozzle Retaining Cap 1
8 C1518 Extended Hafnium Electrode 5
9 C1370 Extended Tip 1.0 – Flat 5
10 C1306 Extended Tip 1.0 – Conical 5
11 P5011 Shield Cup for Extended Tips 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
12 C1356 Ergo Handle c/w Switch 1
13 C1344 6m Cable Assembly 1/8" 1
14 C534 Central Connector c/w 6 Pins 1
For detailed breakdown of C534 Central Connector – see page 271
4
5
6
7
8
9
10
11
1
122
3
14
CABLE FITTING CENTRAL
Cut 40B Termination
13
PLAS
MA
CUTT
ING
STEALTH DIGI-CUT 40 PFC & DIGI-CUT 60 SWP PLASMA TORCH
223
Air Flow: 110 lpm x Rating: 60A @ 80% duty cycle x Cutting Capacity: Production cut 25mm Steel, 20mm Aluminium x Gas:Air/N2
CUT 70 & DIGI CUT 40 PFC/60 TORCH PACKAGEPart No. Description
PC7100H Hand Torch c/w 6m Cable Central Connector
CONSUMABLES
MAIN CONSUMABLES
Item Part No. Description Qty
1 PC7000 Torch Head 70 degree 1
2 PC7001 O-Ring – Torch Head 5
3 PC7002 Gas Distributor 1
4 PC7003 Electrode – Standard 5
5 PC7004 Tip Contact Cutting – 10-20A 5
PC7005 Tip Contact Cutting – 20-30A 5
6 PC7006 Tip Contact Cutting – 30-40A 5
7 PC7007 Flat Tip Cutting – 40-50A 5
PC7008 Flat Tip Cutting – 50-60A 5
8 PC7009 Extended Electrode 5
9 PC7010 Extended Contact Cutting Tip – 10-20A 5
PC7011 Extended Contact Cutting Tip – 20-30A 5
10 PC7012 Extended Contact Cutting Tip – 30-40A 5
11 PC7013 Nozzle Retaining Cap 1
12 PC7015 Double Pointed Spacer 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
13 PC7016 Switch 1
14 PC7017 Handle c/w Switch 1
15 PC7018 Wrench for Electrodes 1
16 PC7019 6m Cable Assembly 1
17 C534 Central Connector c/w 6 Pins 1
For detailed breakdown of C534 Central Connector – see page 271
4
3
5
6
7
8
9
10
11
12
15
1
2
13
14
17
16
CABLE FITTING CENTRAL
PLASMA
CUTTING
STEALTH DIGI-CUT 100 CNC SWP PLASMA TORCH
224
13
20
18
6
5
57
8
12
169
13
10
14
17
15
11 19
4
3 4
2
Air Flow: 210 lpm x Rating: 100A @ 60% duty cycle x Cutting Capacity: Production Cut 30mm Steel,25mm Stainless Steel, 20mm Aluminium x Gas: Air/N2
Part No. Description
PC7200H Hand Torch c/w 6m Cable Central Fitting
PC7201 Hand Torch c/w 12m Cable Central Fitting
21
20
CABLE FITTING CENTRAL
DIGI CUT 100 CNC TORCH PACKAGE
Part No. Description
PC7202 Machine Torch c/w 6m Cable Central Fitting
PC7203 Machine Torch c/w 12m Cable Central Fitting
PLAS
MA
CUTT
ING
STEALTH DIGI-CUT 100 CNC SWP PLASMA TORCH
225
CONSUMABLES
MAIN CONSUMABLES
Item Part No. Description Qty
1 09700 Torch Head – Hand 1
2 09710 Torch Head – Machine 1
3 09700.48 Cooling Tube 5
4 51190.41 O-Ring – Torch Head Hand and Machine 10
5 60025 Gas Distributor 30-70A 2
60026 Gas Distributor 80-100A and Gouging 2
6 52556 Electrode Standard 5
7 52556L Electrode Extended 5
8 51245.09 Tip Contact Cutting 0.9 – 30-40A 10
51246.10 Tip Cutting 1.0 – 40-50A 10
51246.11 Tip Cutting 1.1 – 50-60A 10
51246.12 Tip Cutting 1.2 – 60-70A 10
51248.14 Tip Cutting 1.4 – 80-90A 10
51248.15 Tip Cutting 1.5 – 30-40A 10
9 60500 Retaining Cap – 30-70A 1
60501 Retaining Cap – 80-100A 1
10 60444 Double Pointed Spacer 1
11 60368 Wrench for Electrode 1
12 51276.10 Tip Contact Cutting 1.0 – 40-50A 10
51276.11 Tip Contact Cutting 1.1 – 50-60A 10
51276.12 Tip Contact Cutting 1.2 – 60-70A 10
51278.14 Tip Contact Cutting 1.4 – 80-90A 10
51278.15 Tip Contact Cutting 1.5 – 100A 10
51278G.22 Tip Gouging 100A 10
13 60502 Shield Cup Body 1
14 60504 Shield Cap Hand – 40-70A 5
15 60505 Shield Cap Hand – 80-100A 5
60508 Shield Cap Gouging 5
16 51276L.10 Extended Shielded Tip 1.0 – 40-50A 5
51276L.11 Extended Shielded Tip 1.1 – 50-60A 5
51276L.12 Extended Shielded Tip 1.2 – 60-70A 5
51278L.14 Extended Shielded Tip 1.4 – 80-90A 5
51278L.15 Extended Shielded Tip 1.5 – 100A 5
17 60504L Extended Shielded Cap 40-70A 1
60505L Extended Shielded Cap 80-100A 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
18 09705 Handle Assembly – Hand Torch 1
19 07218 Positioning Tube – Machine Torch 1
07219 Positioning Tube c/w Rack – Machine Torch 1
20 09781CX Cable Assy 6m – Hand Torch 1
09786CX Cable Assy 12m – Hand Torch 1
09791CX Cable Assy 6m – Machine Torch 1
09796CX Cable Assy 12m – Machine Torch 1
21 C534 Central Connector c/w 6 pins 1
For detailed breakdown of C534 Central Connector – see page 271
PLASMA
CUTTING
EL 120 SWP PLASMA TORCH
226
RPT Single Gas - 30-120A @ 100% Duty Cycle
EL 120 TORCH PACKAGE – NON HFPart No. Description
09000 Hand Torch Package 6m – 9/16" Fitting – non HF
09001 Hand Torch Package 6m – Central Connection – non HF
09010 Hand Torch Package 12m – 9/16" Fitting – non HF
09011 Hand Torch Package 12m – Central Connection – non HF
5
6
7
8
9
4
10
11
1213
14
15
16
12
3
17
18
EL 120 TORCH PACKAGE – HFPart No. Description
09000HF Hand Torch Package 6m – 9/16" Fitting – HF
09001HF Hand Torch Package 6m – Central Connection – HF
09010HF Hand Torch Package 12m – 9/16" Fitting – HF
09011HF Hand Torch Package 12m – Central Connection – HF
19
CABLE FITTING CENTRAL
18
CABLE FITTING 9/16" UNF
18
PLAS
MA
CUTT
ING
EL 120 SWP PLASMA TORCH
CONSUMABLES
227
Item Part No. Description Qty
1 07920 Torch Head 1
2 07300.60 O-Ring Torch Head – Black Nitrile 10
3 07920.60 O-Ring Torch Head – Red Silicone 10
4 07924 Insulator – HF 1
5 07923 Start Cartridge 1
6 52600 Electrode – Air / N2 5
7 52603 Extended Electrode – Air / N2 5
8 60060 Gas Distributor – 30-60A 2
60061 Gas Distributor – 60-120A 2
9 51470 Tip – Cutting – 30A 10
51471 Tip – Cutting – 40A 10
51472 Tip – Cutting – 50-60A 10
51474 Tip – Cutting – 60A 10
51475 Tip – Cutting – 70A 10
51476 Tip – Cutting – 80A 10
51477 Tip – Cutting – 90-100A 10
51478 Tip – Cutting – 120A 10
10 51490 Extended Tip – Cutting – 30A 10
51491 Extended Tip – Cutting – 40A 10
51492 Extended Tip – Cutting – 50–60A 10
51493 Extended Tip – Cutting – 60A 10
51494 Extended Tip – Cutting – 70A 10
51495 Extended Tip – Cutting – 80A 10
51496 Extended Tip – Cutting – 90-100A 10
51497 Extended Tip – Cutting – 120A 10
Item Part No. Description Qty
11 60442 Coil Spring 5
12 60480 Shield Cup 30-60A 1
60481 Shield Cup 60-120A 1
13 60444 Double Pointed Spacer 2
14 60482 Shield Cup Extended Consumables – 30-60A 1
60483 Shield Cup Extended Consumables – 60-120A 1
15 60490 Shield Cap for 60482 Cup – 30-60A 1
16 60491 Shield Cap for 60482 Cup – 60-120A 1
17 07106E Handle c/w Switch 1
18 09080 Cable Assembly 6m – 9/16" 1
09085 Cable Assembly 12m – 9/16" 1
19 C534 Central Connector c/w 6 pins 1
For detailed breakdown of C534 Central Connector – see page 271
PLASMA
CUTTING
CEBORA COMPATIBLE CONSUMABLES
CONSUMABLES
228
CP40
Item Part No. Description Qty
1 C1359 Torch Head 1
2 C1516 Electrode 5
3 C1507 Swirl Ring 1
Item Part No. Description Qty
1 C1355 Hand Torch Head 1
2 P1519 Handle c/w Switch – Hand Torch 1
3 C1357 Machine Torch – Head 1
4 C1815 Machine Torch – Handle 1
5 C1842 Tip 1.0mm – 20-50A 5
C1843 Tip 1.3mm – 40-90A 5
C1844 Tip 1.6mm – 80-120A 5
C1845 Tip 1.8mm – 110-150A 5
2345 1
Item Part No. Description Qty
4 C1290 Tip – 0.7mm 5
5 C1906 Nozzle Retaining Cap 1
CP-200
1
2
3
4
567
Part No. Description
C1232 Hand Torch c/w 6m Cables Central Connection – 7 Pin
C1232.10 Hand Torch c/w 12m Cables Central Connection – 7 Pin
CP200 TORCH PACKAGE
Part No. Description
C1234 Mach Torch c/w 6m Shielded Cables Central Connection – 7 Pin
C1234.10 Mach Torch c/w 12m Shielded Cables Central Connection – 7 Pin
Item Part No. Description Qty
6 C1905 Nozzle Holder 1
7 C1386 Stand Off Spring 5
PLAS
MA
CUTT
ING
PROF 35HF & PROF 50 CEBORA COMPATIBLE
229
Air Flow: 120 lpm x Rating: 50A @ 60% duty cycle x Cutting Capacity: 12mm max (most materials) Gas: Single
PROF 35HF & PROF 50 TORCH PACKAGE – STANDARDPart No. Description
C1526 Hand Torch c/w 6m Cables 1/8" BSP Connection
C1574 Hand Torch c/w 6m Cables Central Connection
For Central Connection illustration – see page 271
LT TORCH PACKAGE – LTPart No. Description
C1526LT Hand Torch c/w 6m Cables 1/8" BSP Connection
C1574LT Hand Torch c/w 6m Cables Central Connection
For Central Connection illustration – see page 271
CONSUMABLES
MAIN CONSUMABLES
Item Part No. Description Qty
1 C1352 Torch Head – Standard 1
C1352LT LT Torch Head c/w Handle 1
2 C3160067 O-Ring – Torch Head 10
3 C1521 Hafnium Electrode 5
4 C1510 Swirl Ring 1
5 C1304 Cutting Tip 1.0mm – Flat 5
6 C1305 Cutting Tip 1.0mm – Conical 5
7 C5.710.121 Nozzle Retaining Cap 1
8 C1518 Extended Hafnium Electrode 5
9 C1370 Extended Tip 1.0 – Flat 5
10 C1306 Extended Tip 1.0 – Conical 5
11 P5011 Shield Cup for Extended Tips 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
12 C1356 Ergo Handle c/w Switch 1
13 C1344 6m Complete Cable Assembly 1/8" BSP 1
4
5
6
7
8
9
10
11
1
122
13
3
LT TORCH
PLASMA
CUTTING
PROF 70 CEBORA COMPATIBLE
230
Air Flow: 180 lpm x Rating: 70A @ 60% duty cycle x Cutting Capacity: 20mm max (most materials)Gas: Single
Part No. Description
C1564 Hand Torch c/w 6m Cables – 1/8" BSP Connection
C1573 Hand Torch c/w 6m Cables – Central Connection
C1573.20 Hand Torch c/w 12m Cables – Central Connection
C1564LT Hand Torch c/w 6m Cables – 1/8" BSP Connection
C1573LT Hand Torch c/w 6m Cables – Central Connection
C1573.20LT Hand Torch c/w 12m Cables – Central Connection
1819
1821
20
4
5
6
7
8
9
10
11
12 13
14
17
1
15
16
3
18
3 2
CABLE FITTING 1/8" BSP CABLE FITTING CENTRAL
22
PLAS
MA
CUTT
ING
PROF 70 TORCH PACKAGES
Part No. Description
C1563 Machine Torch c/w 6m Cables – 1/8" BSP Connection
C1566 Machine Torch c/w 6m Cables – Central Connection
C1566.20 Machine Torch c/w 12m Cables – Central Connection
PROF 70 CEBORA COMPATIBLE
CONSUMABLES
231
MAIN CONSUMABLES
Item Part No. Description Qty
1 C1351 Torch Head – Hand 1
C1351LT LT Torch Head – c/w Handle 1
2 C1349 Torch Head – Machine 1
3 C3160067 O-Ring – Torch Head 10
4 C3065204 Diffuser 1
5 C1402 Electrode 5
6 C1510 Swirl Ring 1
7 C1309 Tip 0.9mm – 35A 5
C1396 Tip 1.0mm – 50A 5
C1308 Tip 1.2mm – 70A 5
8 C1305 Cutting Tip 1.0mm – Conical 5
9 C1368 Extended Hafnium Electrode 5
C1403 Extended Electrode 5
10 C1366 Extended Tip 0.9mm – 35A 5
C1395 Extended Tip 1.0mm – 50A 5
C1395/L Extended Tip 1.2mm – 70A 5
11 C5.710.171 Nozzle Retaining Cap 1
12 C1397 Spacer Spring 5
13 C1405 Double Pointed Spacer 1
14 P7015 Spacer for Contact Cutting Extended Consumables 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
15 C1356 Ergo Handle c/w Switch 1
16 C3055623 Handle Machine Torch 1
17 C3045012 Wrench for Electrode / Diffuser 1
18 C1344 6m Complete Cable Assembly 1/8" BSP Hand Torch
1
C1344.20 12m Complete Cable Assembly 1/8" BSP Hand Torch
1
C1346 6m Complete Cable Assembly 1/88" BSP Machine Torch
1
C1346.20 12m Complete Cable Assembly 1/8" BSP Machine Torch
1
19 C534 Central Connector c/w 6 Pins 1
20 C537 Adaptor Body Only 1
21 C539 Plastic Locking Ring 1
22 C540 Adaptor Housing 1
For detailed breakdown of C534 Central Connector – see page 271
15
LT TORCH PROF 70
PLASMA
CUTTING
CP90/91 CEBORA COMPATIBLE
232
Air Flow: 160 lpm x Rating: 90A @ 60% duty cycle x Cutting Capacity: 30mm max (most materials)Gas: Single
Part No. Description
C1215 Hand Torch c/w 6m Cables – 1/8" BSP Connection
C1214 Hand Torch c/w 6m Cables – Central Connection
C1214.20 Hand Torch c/w 12m Cables – Central Connection
C1215LT Hand Torch c/w 6m Cables – 1/8" BSP Connection
C1214LT Hand Torch c/w 6m Cables – Central Connection
C1214.20LT Hand Torch c/w 12m Cables – Central Connection
16
1518
17
15
CABLE FITTING 1/8" BSP CABLE FITTING CENTRAL
19
PLAS
MA
CUTT
ING
CP90/91 TORCH PACKAGES
Part No. Description
C1218 Machine Torch c/w 6m Cables – 1/8" BSP Connection
C1218.20 Machine Torch c/w 12m Cables – Central Connection
4
5
6
7
8
9
10
14
11
13
3 2
3
1
CP90/91 CEBORA COMPATIBLE
CONSUMABLES
233
MAIN CONSUMABLES
Item Part No. Description Qty
1 C1358 Torch Head – Hand 1
C1358LT LT Torch Head c/w Handle 1
2 C1348 Torch Head – Machine 1
3 C3160067 O-Ring – Torch Head 10
4 C0109042 Diffuser 1
5 C1368 Hafnium Electrode 5
6 C1510 Swirl Ring 1
7* C1847SP Tip 1.0mm – 20-50A 5
8* C1848SP Tip 1.2mm – 50-70A 5
C1849SP Tip 1.3mm – 70-90A 5
* Only Use Items 7 & 8 with C1901SP below
9 C1901SP Nozzle Retaining Cap 1
10 C1945SP Shield c/w Spacer for Contact Cutting 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
11 C1356 Ergo Handle c/w Switch 1
12 P1519 Handle c/w Switch – Old Style 1
13 C3055623 Handle – Machine Torch 1
14 C3045012 Wrench for Electrode / Diffuser 1
15 C1344 6m Complete Cable Assembly 1/8" BSP Hand Torch
1
CP9002 6m Complete Cable Assembly Central Connector Hand Torch
1
CP9003 12m Complete Cable Assembly Central Connector Hand Torch
1
CP9004 6m Complete Cable Assembly Central Connector Machine Torch
1
CP9005 12m Complete Cable Assembly Central Connector Machine Torch
1
16 C534 Central Connector c/w 6 Pins 1
17 C537 Adaptor Body Only 1
18 C539 Plastic Locking Ring 1
19 C540 Adaptor Housing 1
For detailed breakdown of C534 Central Connector – see page 271
16
LT TORCH PROF 70
PLASMA
CUTTING
P150/P160 CEBORA COMPATIBLE
234
Air Flow: 220 lpm x Rating: 150A @ 60% duty cycle x Cutting Capacity: 35mm max (most materials)Gas: Single
P150 TORCH PACKAGESPart No. Description
C1571 Hand Torch c/w 6m Cables – 1/8" BSP Connection
C1525 Hand Torch c/w 12m Cables – 1/8" BSP Connection
C1576 Hand Torch c/w 6m Cables – Central Connection
C1578 Hand Torch c/w 12m Cables – Central Connection
C1529 Machine Torch c/w 6m Cables – 1/8" BSP Connection
C1532 Machine Torch c/w 12m Cables – 1/8" BSP Connection
C1577 Machine Torch c/w 6m Cables – Central Connection
C1579 Machine Torch c/w 12m Cables – Central Connection
C1571LT Hand Torch c/w 6m Cables – 1/8" BSP Connection
C1525LT Hand Torch c/w 12m Cables – 1/8" BSP Connection
C1576LT Hand Torch c/w 6m Cables – Central Connection
C1578LT Hand Torch c/w 12m Cables – Central Connection
LT TORCH
P160 TORCH PACKAGESPart No. Description
C1226 Hand Torch c/w 6m Cables – Central Connection
C226.20 Hand Torch c/w 12m Cables – Central Connection
C1228 Machine Torch c/w 6m Cables – Central Connection
C1228.20 Machine Torch c/w 12m Cables – Central Connection
4
6
7
8
9 10
11
12
13
14
15
16
17
18
19
20 21
22
23
24
2526
27
28
29
33
34
30
32
1
3
5 2
3
PLAS
MA
CUTT
ING
P150/P160 CEBORA COMPATIBLE
CONSUMABLES
235
SECONDARY CONSUMABLES
Item Part No. Description Qty
28 C1406 Gouging Spacer 1
29 C1509 Extractor for Swirl Ring 1
30 C1356 Ergo Handle c/w Switch 1
31 P1519 Handle c/w Switch – Old Style 1
32 C3055623 Handle Machine Torch 1
33 C3045012 Wrench for Electrode / Diffuser 1
34 P1521 6m Complete Cable Assembly – 1/8" BSP Hand Torch
1
P1522 12m Complete Cable Assembly – 1/8" BSPHand Torch
1
P1520 6m Complete Cable Assembly – 1/8" BSP Machine Torch
1
P1523 12m Complete Cable Assembly – 1/8" BSPMachine Torch
1
35 C534 Central Connector c/w 6 Pins 1
36 C537 Adaptor Body Only 1
37 C539 Plastic Locking Ring 1
38 C540 Adaptor Housing 1
For detailed breakdown of C534 Central Connector – see page 271
35
3437
36
CABLE FITTING CENTRAL
38
MAIN CONSUMABLES
Item Part No. Description Qty
1 C1353 Torch Head – Hand 1
C1353LT LT Torch Head c/w Handle 1
2 C1354 Torch Head – Machine 1
3 C1398 O-Ring – Torch Head 10
4 C1378 Diffuser 1
5 P1501 Front Insulator – Vespel 1
6 C1376 Hafnium Electrode 5
7 C1377 Swirl Ring Vespel 1
8 C1371 Cutting Tip – 1.1mm 10
C1372 Cutting Tip – 1.35mm 10
C1373 Cutting Tip – 1.6mm 10
C1374 Cutting Tip – 1.8mm 10
C1375 Gouging Tip – 3.0mm 10
9 C1389 Nozzle Retaining Cap 1
10 C1390 Contact Cutting Tip – 1.35mm 10
C1392 Contact Cutting Tip – 1.8mm 10
11 P1502 Extended Diffuser 1
12 C1517 Extended Electrode 5
13 C1369 Extended Contact Cutting Tip – Max 50A 5
14 P1503 Extended Tip – 1.35mm – 90A 5
P1504 Extended Tip – 1.6mm – 120A 5
P1505 Extended Tip – 1.8mm – 150A 5
15 C1393 Contact Nozzle Retaining Cap 1
P1506 Contact Nozzle Retaining Cap – Long Life 1
16 P1507 Spring Holder Protection Nut 1
17 P1508 Spacer Springs for P1507 5
18 P1509 Gouging Spacer 1
19 P1510 Spacer for Contact Cutting – HandUse with Items 15 & 8
5
P1511 Spacer for Contact Cutting – HandUse with Items 15 & 10
5
C1394 Spacer for Contact Cutting – HandUse with Items 15 & 10
5
20 P1512 Spacer for Contact Cutting – MachineUse with Items 15 & 8
1
21 P1513 Spacer for Contact Cutting – Hand 50A 1
22 P1514 Spacer for Contact Cutting – Hand Above 50A 1
23 P1515 Spacer for Extended Tips – High Amp 1
24 P1516 Locking Nut 1
25 C1386 Stand Off Spring 5
26 C1408 Double Pointed Spacer 1
27 C1409 Crown Spacer 1
34
CABLE FITTING 1/8" BSP
P150 / 160
PLASMA
CUTTING
TRAFIMET COMPATIBLE CONSUMABLES
236
A53 & S54
3
5
1
2
4 6
7
8 9
Item Part No. Description Qty
1 PR105 Electrode 5
2 PR106 Extended Electrode 5
3 PE106 Swirl Ring 1
4 PD102 Tip – 1.0mm 5
5 PD103-09 Extended Tip – 0.9mm 5
6 PC105 Nozzle Retaining Cap – A53 1
Item Part No. Description Qty
7 PC115 Nozzle Retaining Cap – S54 1
8 CV33 Crown Spacer 1
9 CV28 Spacer Spring 5
S75
Item Part No. Description Qty
1 PC114 Outside Nozzle 2
2 CV33 Crown Spacer 2
3 CV28 Spacer Spring 10
4 CV76 Insulator – Outside Nozzle 10
5 PE112 Swirl Ring / Diffuser 2
Item Part No. Description Qty
6 PR119 Electrode – Long 10
7 PR117 Electrode – Short 10
8 PD118-10 Tip 1.0 – Long 10
9 PD114-10 Tip 1.0 – Standard 10
PD114-12 Tip 1.2 – Standard 10
12
3
5
4
6
7
8
9
PLAS
MA
CUTT
ING
S25/25K/30/35K / S45 TRAFIMET COMPATIBLE
237
14
13
CABLE FITTING CENTRAL
Air Flow: 90 lpm x Rating: 40A @ 60% duty cycle x Cutting Capacity: 10mm max (most materials)Gas: Single
S25/25K/30/35K TORCH PACKAGESPart No. Description
PA370 Hand Torch 4m Cables – Type A
PA375 Hand Torch 4m Cables – Type B
PA376 Hand Torch 4m Cables – Type B
S45 TORCH PACKAGESPart No. Description
PA167 Hand Torch S45 4m Cables – Type C
PA165 Hand Torch S45 6m Cables – Type D
PA166 Hand Torch S45 6m Cables – Central Connection
MAIN CONSUMABLES
Item Part No. Description Qty
1 S2500 Torch Head – S25/S25K 1
S2501 Torch Head – S45 1
2 PE106 Swirl Ring 1
3 PR105 Electrode 5
4 PD102-09 Tip – 0.9mm 5
PD102 Tip – 1.0mm 5
5 PR110 Electrode 5
6 PD116-06 Tip – 0.65mm – S25K – GYS 20K 5
PD116-08 Tip – 0.8mm – S25K – GYS 20 5
PD116-09 Tip – 0.9mm – S25 – GYS 20 5
7 PR106 Extended Electrode 5
8 PD103-65 Extended Tip – 0.65mm – S25K 5
PD103-09 Extended Tip – 0.9mm – S25 5
9 PC116 Nozzle Retaining Cap – S45 1
PC122 Nozzle Retaining Cap – S25K (1 Hole) 1
PC117 Nozzle Retaining Cap – S25K (2 Hole) – GYS 20K 1
PC135 Nozzle Retaining Cap – S35K (4 Hole) – GYS 20 1
10 S2503 Double Pointed Spacer 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
11 S2504 Handle c/w Switch – Hand Torch 1
12 S2505 4m Cable Assembly – S25K – Type A 1
S2506 4m Cable Assembly – S25/S25K – Type B 1
S2507 4m Cable Assembly – S45 – Type C 1
S2508 6m Cable Assembly – S45 – Type D 1
13 S2509 6m Cable Assembly – S45 – Central Connection 1
14 C534 Central Connector c/w 6 Pins 1
For detailed breakdown of C534 Central Connector – see page 271
CONSUMABLES
2
3
4
5
6
7
8
9
10
1
1112
Connection
TypeA
Type B
Type C
Type D
PLASMA
CUTTING
A81/P81 TRAFIMET COMPATIBLE
238
Air Flow: 155 lpm x Rating: 80A @ 60% duty cycle x Cutting Capacity: 12mm max (most materials)Gas: Single
Part No. Description
PA1400 Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1402 Hand Torch c/w 6m Cables – Central Connection
PA1404 Hand Torch c/w 6m Cables – 1/4" BSP Connection
PA1400LT Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1402LT Hand Torch c/w 6m Cables – Central Connection
PA1404LT Hand Torch c/w 6m Cables – 1/4" BSP Connection
19
18
CABLE FITTING 3/8" BSP CABLE FITTING CENTRAL
5
8
6
7
11
10
13
1 14
3
3
2 16
12
4
9
PLAS
MA
CUTT
ING
A81/P81 TORCH PACKAGES
Part No. Description
PA180 Machine Torch c/w 6m Cables – M14 x 1 Metric Connection
PA181 Machine Torch c/w 6m Cables – Central Connection
17
17
A81/P81 TRAFIMET COMPATIBLE
CONSUMABLES
239
MAIN CONSUMABLES
Item Part No. Description Qty
1 PF140 Torch Head – Hand 1
PF140LT LT Torch Head c/w Handle 1
2 PF120 Torch Head – Machine 1
3 EA125 O-Ring – Torch Head 10
4 FH560 Diffuser 1
FH561 Extended Diffuser 1
5 PR109 Hafnium Electrode – Long Life 5
6 PE107 Swirl Ring 1
7 PD105 Tip – 1.0mm 5
PD105-11 Tip – 1.1mm 5
PD105-12 Tip – 1.2mm 5
8 PR115 Extended Electrode – Long Life 5
9 PD106 Extended Tip – 1.0 – 50A 5
PD106-12 Extended Tip – 1.2 – 80A 5
10 PC115 Nozzle Retaining Cap 1
11 CV201 Spacer for Contact Cutting 1
12 CV33 Crown Spacer 1
13 CV28 Spacer Springs 5
SECONDARY CONSUMABLES
Item Part No. Description Qty
14 C1356 Ergo Handle c/w Switch 1
15 TP84 Handle c/w Switch – Old Style 1
16 TP61 Handle – Machine Torch 1
17 PH130 6m Complete Cable Assembly – 3/8" BSP 1
18 PH132 6m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
19 FY23 Central Connector Kit c/w 4 Pins 1
For detailed breakdown of C534 Central Connector – see page 271
LT TORCH A81
PLASMA
CUTTING
27
A101/P101 TRAFIMET COMPATIBLE
240
Air Flow: 180 lpm x Rating: 100A @ 60% duty cycle x Cutting Capacity: 25mm max (most materials)Gas: Single
Part No. Description
PA1450 Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1452 Hand Torch c/w 6m Cables – Central Connection
PA1454 Hand Torch c/w 6m Cables – 1/4" BSP Connection
PA1450LT Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1452LT Hand Torch c/w 6m Cables– Central Connection
PA1454LT Hand Torch c/w 6m Cables – 1/4" BSP Connection
29
28
CABLE FITTING M14 x 1 CABLE FITTING CENTRAL
13
14
15
16
17
18
19
20
21
22
23
30
5
89
6
7
12
24
3
3
1
2
26
11
4
10
27
28
PLAS
MA
CUTT
ING
A101/P101 TORCH PACKAGES
Part No. Description
PA110 Machine Torch c/w 6m Cables – M14 x 1 Metric Connection
PA111 Machine Torch c/w 6m Cables – Central Connection
A101/P101 TRAFIMET COMPATIBLE
CONSUMABLES
241
LT TORCH A101
MAIN CONSUMABLES
Item Part No. Description Qty
1 PF145 Torch Head – Hand 1
PF145LT LT Torch Head c/w Handle 1
2 PF115 Torch Head – Machine 1
3 EA131 O-Ring – Torch Head 10
4 FH562 Diffuser 1
5 A9001 Extended Diffuser 1
6 PR101 Hafnium Electrode – Threaded 5
7 PR116 Extended Electrode – Push Fit 5
8 PE101 Swirl Ring 1
9 PE103 Swirl Ring – Long Electrode/Tips 1
10 PD101-11 Tip – 1.1mm 5
PD101-14 Tip – 1.4mm 5
PD101-17 Tip – 1.7mm 5
11 PC109 Nozzle Retaining Cap 1
PC111 Nozzle Retaining Cap – Long Life 1
12 PC113 Contact Nozzle Retaining Cap 1
PC130 Contact Nozzle Retaining Cap – Long Life 5
13 CV23 Spacer for Contact Cutting 1
14 CV39 Large Spacer for Contact Cutting 1
15 CV8 Spacer for Extended Contact Cutting c/w item 24Max 50Amps
1
CV9 Spacer for Extended Contact Cutting c/w item 24Above 50 Amps
1
16 C1386 Stand Off Spring 5
17 C1408 Double Pointed Spacer 1
18 C1409 Crown Spacer 1
19 P1510 Spacer Contact Cutting – HandUse with Items 12 & 21
5
20 P1512 Spacer Contact Cutting – MachineUse with Items 12 & 21
5
21 P1516 Locking Nut 1
22 P1507 Spring Holder Protection Nut 1
23 P1508 Spacer Springs for P1507 5
SECONDARY CONSUMABLES
Item Part No. Description Qty
24 C1356 Ergo Handle c/w Switch 1
25 P1519 Handle c/w Switch – Old Style 1
26 C3055623 Handle – Machine Torch 1
27 PH142 6m Complete Cable Assembly – M14 x 1 Metric 1
28 PH143 6m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
29 FY23 Central Connector Kit c/w 4 Pins 1
30 C1509 Swirl Ring Removal Tool 1
For detailed breakdown of C534 Central Connector – see page 271
PLASMA
CUTTING
31
32
A141/P141 TRAFIMET COMPATIBLE
242
Air Flow: 210 lpm x Rating: 140A @ 60% duty cycle x Cutting Capacity: 35mm max (most materials)Gas: Single
Part No. Description
PA1500 Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1501 Hand Torch c/w 12m Cables – M14 x 1 Metric Connection
PA1502 Hand Torch c/w 6m Cables – 1/4" BSP Connection
PA1504 Hand Torch c/w 6m Cables – Central Connection
PA1505 Hand Torch c/w 12m Cables – Central Connection
PA1500LT Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1501LT Hand Torch c/w 12m Cables – M14 x 1 Metric Connection
PA1504LT Hand Torch c/w 6m Cables – Central Connection
PA1505LT Hand Torch c/w 12m Cables – Central Connection
CABLE FITTING M14 x 1
18
15
1617
18
19
21
23
24
2625
34
5
8
67
11 1014
28
3
3
1
2
30
13
49
31
32
20
12
22
27
33
32
CABLE FITTING CENTRAL
PLAS
MA
CUTT
ING
A141/P141 TORCH PACKAGES
Part No. Description
PA103 Machine Torch c/w 6m Cables – M14 x 1 Metric Connection
PA104 Machine Torch c/w 12m Cables– M14 x 1 Metric Connection
PA145 Machine Torch c/w 6m Cables – Central Connection
PA146 Machine Torch c/w 12m Cables – Central Connection
A141/P141 TRAFIMET COMPATIBLE
CONSUMABLES
243
LT TORCH
A141
MAIN CONSUMABLES
Item Part No. Description Qty
1 PF155 Torch Head – Hand 1
PF155LT Torch Head c/w Handle 1
2 PF102 Torch Head – Machine 1
3 EA131 O-Ring – Torch Head 10
4 C1378 Diffuser 1
5 P1502 Extended Diffuser 1
6 PR101 Hafnium Electrode 5
7 PR116 Extended Electrode 5
8 PE101 Swirl Ring 1
9 PE103 Swirl Ring for Extended Electrode 1
10 PD101-11 Tip 1.1mm 5
PD101-14 Tip 1.4mm 5
PD101-17 Tip 1.7mm 5
PD101-19 Tip 1.9mm 5
PD101-30 Gouging Tip 3.0mm 5
11 PD111 Extended Tip Max 50A 5
12 PD117-14 Extended Tip 1.4mm Max 90A 5
PD117-17 Extended Tip 1.7mm Max 120A 5
PD117-19 Extended Tip 1.9mm Max 150A 5
13 PC101 Nozzle Retaining Cap 1
PC102 Nozzle Retaining Cap – Long Life 1
14 PC103 Contact Nozzle Retaining Cap 1
PC131 Contact Nozzle Retaining Cap – Long Life 5
15 CV23 Spacer for Contact Cutting 1
16 CV39 Large Spacer for Contact Cutting 1
17 CV8 Spacer for Extended Contact Cutting c/w item 25Max 50 Amps
1
CV9 Spacer for Extended Contact Cutting c/w item 25Above 50 Amps
1
18 C1386 Stand Off Spring 5
19 C1408 Double Pointed Spacer 1
20 C1409 Crown Spacer 1
21 C1406 Gouging Spacer 1
22 P1509 Gouging Spacer for Item 14 1
23 P1510 Spacer Contact Cutting – HandUse with Items 14 & 25
5
24 P1512 Spacer Contact Cutting – MachineUse with Items 14 & 25
5
25 P1516 Locking Nut 1
26 P1507 Spring Holder Protection Nut 1
27 P1508 Spacer Springs for P1507 5
SECONDARY CONSUMABLES
Item Part No. Description Qty
28 C1356 Ergo Handle c/w Switch 1
29 P1519 Handle c/w Switch – Old Style 1
30 C3055623 Handle – Machine Torch 1
31 PH148 6m Complete Cable Assembly – M14 x 1 Metric 1
PH150 12m Complete Cable Assembly – M14 x 1 Metric 1
32 PH149 6m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
PH151 12m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
33 FY23 Central Connector Kit c/w 4 Pins 1
34 C1509 Swirl Ring Removal Tool 1
For detailed breakdown of C534 Central Connector – see page 271
29
PLASMA
CUTTING
R145/R145P TRAFIMET COMPATIBLE
244
Air Flow: 230 lpm x Rating: 150A @ 60% duty cycle x Cutting Capacity: 35mm max (most materials)Gas: Single
Part No. Description
PA129 Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA250 Hand Torch c/w 6m Cables – Central Connection
PA130 Hand Torch c/w 12m Cables – M14 x 1 Metric Connection
PA251 Hand Torch c/w 12m Cables – Central Connection
CABLE FITTING M14 x 1
28
27
CABLE FITTING CENTRAL
15
16
17
18
19
21
29
5
8
67
11
10
14
123
3
3
2
25
13
4
9
26
27
20
12
22
26
PLAS
MA
CUTT
ING
R145/R145P TORCH PACKAGES
Part No. Description
PA127 Machine Torch c/w 6m Cables – M14 x 1 Metric Connection
PA252 Machine Torch c/w 6m Cables – Central Connection
PA128 Machine Torch c/w 12m Cables – M14 x 1 Metric Connection
PA253 Machine Torch c/w 12m Cables – Central Connection
R145/R145P TRAFIMET COMPATIBLE
CONSUMABLES
245
R145
MAIN CONSUMABLES
Item Part No. Description Qty
1 PF112 Torch Head – Hand 1
2 PF111 Torch Head – Machine 1
3 EA131 O-Ring – Torch Head 10
4 C1378 Diffuser 1
5 P1502 Extended Diffuser 1
6 PR111 Hafnium Electrode 5
7 PR116 Extended Electrode 5
8 PE103 Swirl Ring 1
9 PD109-14 Tip – 1.4mm 5
PD109-16 Tip – 1.6mm 5
PD109-18 Tip – 1.8mm 5
PD109-30 Gouging Tip – 3.0mm 5
10 PD111 Extended Tip – Max 50A 5
11 PD117-14 Extended Tip – 1.4mm Max 90A 5
PD117-17 Extended Tip – 1.7mm Max 120A 5
PD117-19 Extended Tip – 1.9mm Max 150A 5
12 PC120 Nozzle Retaining Cap 1
13 BW139 Nozzle Shield 1
14 CV1105 Contact Cutting Attachment 1
15 PC103 Contact Nozzle Retaining Cap 1
PC131 Contact Nozzle Retaining Cap – Long Life 1
16 CV8 Spacer for Ext. Contact Cutting c/w item 17Max 50 Amps
1
CV9 Spacer for Ext. Contact Cutting c/w item 17Above 50 Amps
1
17 P1516 Locking Nut 1
18 P1509 Gouging Spacer 1
19 P1507 Spring Holder Protection Nut 1
20 P1508 Spacer Springs for P1507 5
21 P1510 Spacer Contact Cutting – HandUse with Items 15 & 17
5
22 P1512 Spacer Contact Cutting – MachineUse with Items 15 & 17
5
SECONDARY CONSUMABLES
Item Part No. Description Qty
23 C1356 Ergo Handle c/w Switch 1
24 TP10 Handle c/w Switch – Old Style 1
25 C3055623 Handle – Machine Torch 1
26 PH148 6m Complete Cable Assembly – M14 x 1 Metric 1
PH150 12m Complete Cable Assembly – M14 x 1 Metric 1
27 PH149 6m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
PH151 12m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
28 FY23 Central Connector Kit c/w 4 Pins 1
29 C1509 Swirl Ring Removal Tool 1
For detailed breakdown of C534 Central Connector – see page 271
24
PLASMA
CUTTING
26
27
A151/P151 TRAFIMET COMPATIBLE
246
Air Flow: 230 lpm x Rating: 150A @ 60% duty cycle x Cutting Capacity: 35mm max (most materials)Gas: Single
Part No. Description
PA1550 Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1551 Hand Torch c/w 12m Cables – M14 x 1 Metric Connection
PA1552 Hand Torch c/w 6m Cables – 1/4" BSP Connection
PA1554 Hand Torch c/w 6m Cables – Central Connection
PA1555 Hand Torch c/w 12m Cables – Central Connection
PA1550LT Hand Torch c/w 6m Cables – M14 x 1 Metric Connection
PA1551LT Hand Torch c/w 12m Cables – M14 x 1 Metric Connection
PA1554LT Hand Torch c/w 6m Cables – Central Connection
PA1555LT Hand Torch c/w 12m Cables – Central Connection
CABLE FITTING M14 x 1
28
27
CABLE FITTING CENTRAL
15
16
17
18
19
21
29
5
8
67
11
10
14
23
3
3
1
2
25
13
4
9
26
27
20
12
22PLAS
MA
CUTT
ING
A151/P151 TORCH PACKAGES
Part No. Description
PA127 Machine Torch c/w 6m Cables – M14 x 1 Metric Connection
PA128 Machine Torch c/w 12m Cables – M14 x 1 Metric Connection
PA252 Machine Torch c/w 6m Cables – Central Connection
PA253 Machine Torch c/w 12m Cables – Central Connection
A151/P151 TRAFIMET COMPATIBLE
CONSUMABLES
247
LT TORCH
A151
MAIN CONSUMABLES
Item Part No. Description Qty
1 PF160 Torch Head – Hand c/w Handle 1
PF160LT LT Torch Head c/w Handle 1
2 PF111 Torch Head – Machine 1
3 EA131 O-Ring – Torch Head 10
4 C1378 Diffuser 1
5 P1502 Extended Diffuser 1
6 PR111 Hafnium Electrode 5
7 PR116 Extended Electrode 5
8 PE103 Swirl Ring 1
9 PD109-14 Tip – 1.4mm 5
PD109-16 Tip – 1.6mm 5
PD109-18 Tip – 1.8mm 5
PD109-30 Gouging Tip 3.0mm 5
10 PD111 Extended Tip – Max 50A 5
11 PD117-14 Extended Tip – 1.4mm Max 90A 5
PD117-17 Extended Tip – 1.7mm Max 120A 5
PD117-19 Extended Tip – 1.9mm Max 150A 5
12 PC120 Nozzle Retaining Cap 1
13 BW139 Nozzle Shield 1
14 CV1105 Contact Cutting Attachment 1
15 PC103 Contact Nozzle Retaining Cap 1
PC131 Contact Nozzle Retaining Cap – Long Life 1
16 CV8 Spacer for Extended Contact Cutting c/w item 17 Max 50 Amps
1
CV9 Spacer for Extended Contact Cutting c/w item 17Above 50 Amps
1
17 P1516 Locking Nut 1
18 P1509 Gouging Spacer 1
19 P1507 Spring Holder Protection Nut 1
20 P1508 Spacer Springs for P1507 5
21 P1510 Spacer Contact Cutting – HandUse with Items 15 & 17
5
22 P1512 Spacer Contact Cutting – MachineUse with Items 15 & 17
5
SECONDARY CONSUMABLES
Item Part No. Description Qty
23 C1356 Handle c/w Switch 1
24 P1519 Handle c/w Switch – Old Style 1
25 C3055623 Handle – Machine Torch 1
26 PH148 6m Complete Cable Assembly – M14 x 1 Metric 1
PH150 12m Complete Cable Assembly – M14 x 1 Metric 1
27 PH149 6m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
PH151 12m Complete Cable Assembly – 1/4" BSPfor Central Connection
1
28 FY23 Central Connector Kit c/w 4 Pins 1
29 C1509 Swirl Ring Removal Tool 1
For detailed breakdown of C534 Central Connector – see page 271
24
PLASMA
CUTTING
T70/MT70 LINCOLN COMPATIBLE
248
Air Flow: 180 lpm x Rating: 70A @ 60% duty cycle x Cutting Capacity: 20mm max (most materials)Gas: Single
Part No. Description
W0400047 Hand Torch c/w 6m Cables – Central Connection
WB300205 Consumable Accessory Kit PC402 x Electrodes, 1 x Swirl Ring, 2 x Standard Tips 1.0, 1 x Extended Electrode, 1 x Extended Tip 1.0
19
18
CABLE FITTING CENTRAL
4
5
6
7
8
10
11
9
14 12
13
17
1
15
16
3
18
3 2
PLAS
MA
CUTT
ING
T70/MT70 TORCH PACKAGES
Part No. Description
W0400045 Machine Torch c/w 6m Cables – Central Connection
WB300206 Consumable Accessory Kit PC602 x Electrodes, 1 x Swirl Ring, 2 x Standard Tips 1.2, 1 x Extended Electrode, 1 x Extended Tip 1.2
T70/MT70 LINCOLN COMPATIBLE
CONSUMABLES
249
MAIN CONSUMABLES
Item Part No. Description Qty
1 W0300262 Torch Head – Hand 1
2 W0300148 Torch Head – Machine 1
3 C3160067 O-Ring – Torch Head 20
4 C3065204 Diffuser 5
5 C1402 Hafnium Electrode 10
6 020101 Swirl Ring 10
7 C1309 Cutting Tip – 0.9mm – Hand 10
C1396 Cutting Tip – 1.0mm – Hand 10
WB300192 Cutting Tip – 1.1mm – Hand 10
WB300108 Cutting Tip – 1.2mm – Hand 10
020102 Cutting Tip – Flat – 1.0mm – Machine 10
WB300150 Cutting Tip – Flat – 1.2mm – Machine 10
8 C1305 Cutting Tip – Conical – 1.0mm – Machine 10
WB300152 Cutting Tip – Conical – 1.2mm – Machine 10
9 C5.710.171 Nozzle Retaining Cap 1
10 C1368 Extended Hafnium Electrode 5
11 C1366 Extended Nozzle – 0.9mm 5
C1395 Extended Nozzle – 1.0mm 5
WB300237 Extended Nozzle – 1.1mm 5
C1395/L Extended Nozzle – 1.2mm 5
12 C1405 Double Pointed Spacer 3
13 P7015 Spacer for Contact Cutting – Hand 2
14 C1397 Spacer Spring 5
SECONDARY CONSUMABLES
Item Part No. Description Qty
15 TP10 Handle c/w Switch – Hand Torch 1
16 C3055623 Handle – Machine Torch 1
17 C3045012 Wrench for Electrode/Diffuser 1
18 W0300242 6m Complete Cable Assembly – 1/4" BSPfor Hand Torch
1
W0332100 6m Complete Cable Assembly – 1/4" BSPfor Machine Torch
1
19 W0300117 Central Connector Complete 1
For detailed breakdown of C534 Central Connector – see page 271
T70
PLASMA
CUTTING
T100/MT100 LINCOLN COMPATIBLE
250
Air Flow: 210 lpm x Rating: 100A @ 60% duty cycle x Cutting Capacity: 25mm max (most materials)Gas: Single
Part No. Description
W0400048 Hand Torch c/w 6m Cables – Central Connection
WB300303 Consumable Accessory Kit4 x Electrodes, 1 x Swirl Ring
32
31
CABLE FITTING CENTRAL
4
6
7
8
10
11
9
14
12
1513
16
30
127
29
3
31
3
2
26
24
23
22
5
5
19
18
17
20
21
25
28
PLAS
MA
CUTT
ING
T100/MT100 TORCH PACKAGES
Part No. Description
W0400046 Machine Torch c/w 6m Cables – Central Connection
WB3A0303 Consumable Accessory Kit PC601 x Swirl Ring, 1 x Tip 1.1, 1 x Tip 1.35, 1 x Tip 1.6
T100/MT100 LINCOLN COMPATIBLE
CONSUMABLES
251
T100
PLASMA
CUTTING
MAIN CONSUMABLES
Item Part No. Description Qty
1 W0300263 Torch Head – Hand 1
2 W0300143 Torch Head – Machine 1
3 C1398 O-Ring – Torch Head 20
4 FH562 Diffuser 1
5 WB300264 Front Insulator – Vespel 3
6 C1376 Electrode Hafnium 5
7 C1377 Swirl Ring Vespel 1
8 C1371 Cutting Tip – 1.1mm 5
C1372 Cutting Tip – 1.35mm 5
C1373 Cutting Tip – 1.6mm 5
WB300128 Gouging Tip – 2.4mm 5
9 WB300129 Nozzle Retaining Cap 1
10 C1390 Contact Cutting Tip – 1.35mm 10
C1391 Contact Cutting Tip – 1.6mm 10
11 A9001 Extended Diffuser 1
12 C1517 Extended Electrode 5
13 C1369 Extended Contact Cutting Tip – Max 50 Amp 5
14 P1503 Extended Tip 1.35mm – 90A 5
P1504 Extended Tip 1.6mm – 120A 5
15 WB300138 Contact Nozzle Retaining Cap 1
16 P1507 Spring Holder Protection Nut 5
17 P1508 Spacer Springs 5
18 P1510 Spacer for Contact Cutting – Hand 3
19 P1512 Spacer for Contact Cutting – Machine 1
20 P1513 Spacer for Ext. Contact Cutting – Max 50 Amps 1
P1514 Spacer for Ext. Contact Cutting – Above 50 Amps 2
21 P1516 Locking Nut 3
22 C1386 Stand Off Spring 5
23 C1408 Double Pointed Spacer 1
24 C1409 Crown Spacer 1
25 C1406 Gouging Spacer 1
26 C1509 Extractor for Swirl Ring 1
SECONDARY CONSUMABLES
Item Part No. Description Qty
27 TP10 Handle c/w Switch – Hand Torch 1
28 PC7016 Switch 1
29 C3055623 Handle – Machine Torch 1
30 C3045012 Wrench for Electrode 1
31 W0300140 6mtr Comp Cable Assembly 1/8" BSPfor Hand Torch
1
W0300189 6mtr Comp Cable Assembly 1/8" BSPfor Machine Torch
1
32 W0300117 Central Connector Complete 1
For detailed breakdown of C534 Central Connector – see page 271
BINZEL COMPATIBLE CONSUMABLES
252
PSB60 / 80 / 121
Item Part No. Description Qty
1 BP801 Electrode – Hafnium 5
BP801-ZR Electrode – Zirconium 5
2 BP811 Spacer Spring 5
Item Part No. Description Qty
3 BP802-10 Tip 1.0mm 10
BP802-13 Tip 1.3mm 10
BP802-15 Tip 1.5mm 10
BP802-18 Tip 1.8mm 10
BP802-20 Tip 2.0mm 10
12
3
ABIPLUS Cut 70/110/150
Item Part No. Description Qty
1 BP-71 Electrode 5
2 BP-72 Swirl Ring 1
3 BP-76 Shield Cap 5
Item Part No. Description Qty
4 BP-73 Tip 0.9mm 10
BP-74 Tip 1.1mm 10
BP-75 Tip 1.2mm 10
Item Part No. Description Qty
5 BP-53 Tip 1.2mm 10
BP-54 Tip 1.5mm 10
BP-55 Tip 1.6mm 10
BP-56 Tip 1.8mm 10
Item Part No. Description Qty
1 BP-51 Electrode 5
2 BP-52 Swirl Ring 1
3 BP-57 Shield Cap 5
4 BP-58 Spacer Spring 5
Item Part No. Description Qty
1 BP-11 Electrode 5
2 BP-12 Swirl Ring 1
3 BP-17 Shield Cap 5
4 BP-18 Spacer Spring 5
Item Part No. Description Qty
5 BP-13 Tip 1.0mm 10
BP-14 Tip 1.2mm 10
BP-15 Tip 1.4mm 10
BP-16 Tip 1.6mm 10
123 4
1234 5
12534
CUT 70
CUT 110
CUT 150
PLAS
MA
CUTT
ING
TELWIN COMPATIBLE CONSUMABLES
253
PLASMA 34 KOMPRESSOR / PLASMA 54 KOMPRESSOR / PLASMA 41
Item Part No. Description Qty
1 PE106 Swirl Ring 1
2 PR105 Electrode 5
3 PD102 Tip 1.0mm 5
4 PR110 Electrode 5
5 PD116-08 Tip 0.65mm 5
PD116-09 Tip 0.9mm 5
Item Part No. Description Qty
6 PR106 Extended Electrode 5
7 PD103-09 Extended Tip 0.9mm 5
8 PC116 Nozzle Retaining Cap 1
802096 Nozzle Retaining Cap (1 Hole) 1
802485 Nozzle Retaining Cap (4 Hole) 1
9 S2503 Double Pointed Spacer 1
Item Part No. Description Qty
1 C1521 Electrode – Hafnium 5
2 020101 Swirl Ring 1
3 C1304 Cutting Tip 1.0mm – Flat 5
Item Part No. Description Qty
4 802081 Nozzle Retaining Cap 1
5 C1518 Extended Electrode – Hafnium 5
6 C1370 Extended Tip 1.0 – Flat 5
1
2
3
45
6
6
8
2
3
4
5
7
9
1
SUPERIOR PLASMA 60 HF & SUPER PLASMA 80/3 HF
PLASMA
CUTTING
SL60/SL100 THERMADYNE ONE TORCH
254
Air Flow: 142-235 lpm x Rating: 30-100A @ 100% duty cycle x Cutting Capacity: 25mm max (most materials) x Gas: Single
CABLE FITTING – ATC CABLE FITTING – RPT
SL60 TORCH PACKAGE – 20-60APart No. Description
7-5200 Torch Package – 6m – RPT Termination
7-5201 Torch Package – 15m – RPT Termination
7-5204 Torch Package – 6m – ATC Termination
7-5205 Torch Package – 15m – ATC Termination
SL100 TORCH PACKAGE – 30-100APart No. Description
7-5202 Torch Package – 6m – RPT Termination
7-5203 Torch Package – 15m – RPT Termination
7-5206 Torch Package – 6m – ATC Termination
7-5208 Torch Package – 15m – ATC Termination
1
4
2
3
13
11
12
10
9
8
7
6
5
13
14
PLAS
MA
CUTT
ING
SL60/SL100 THERMADYNE ONE TORCH
CONSUMABLES
255
Item Part No. Description Qty
1 9-8219 Head – SL60/100 70 Degree 1
2 8-3487 O-Ring Torch Head – Black Nitrile 10
3 8-3486 O-Ring Torch Head – Red Silicone 10
4 9-8213 Start Cartridge 1
5 9-8215 Electrode – Maximum Life 5
6 9-8205 Tip – Drag – 20A 5
9-8206 Tip – Drag – 30A 5
9-8207 Tip – Drag – 40A 5
9-8208 Tip – Cutting – 40A 5
9-8209 Tip – Cutting – 50/55A 5
9-8210 Tip – Cutting – 60A 5
9-8231 Tip – Cutting – 70A 5
9-8211 Tip – Cutting – 80A 5
9-8212 Tip – Cutting – 90/100A 5
9-8225 Tip – Gouging – 40A 5
9-8226 Tip – Gouging – 60A 5
9-8227 Tip – Gouging – 80A 5
9-8228 Tip – Gouging – 100A 5
7 9-8237 Shield Cup Max Life* Illustrated use with items8,9 & 10
1
9-8218 Shield Cup – Standard 1
8 9-8244 Shield Cap – Drag – 40A
9-8235 Shield Cap – Drag – 50/60A 1
9-8236 Shield Cap – Drag – 70/100A 1
9 9-8241 Shield Cap – Gouging 1
10 9-8243 Shiled cap – Deflector 1
11 9-7030 Handle c/w Switch 1
12 9-7034 Trigger Assembly 1
13 4-7830 SL60 Cable Assembly – 6m – RPT Fitting 1
4-7831 SL60 Cable Assembly – 15m – RPT Fitting 1
4-7832 SL100 Cable Assembly – 6m – RPT Fitting 1
4-7833 SL100 Cable Assembly – 15m – RPT Fitting 1
14 4-7834 SL60 Cable Assembly – 6m –ATC Fitting 1
4-7835 SL60 Cable Assembly – 15m –ATC Fitting 1
4-7836 SL100 Cable Assembly – 6m –ATC Fitting 1
4-7837 SL100 Cable Assembly – 15m –ATC Fitting 1
NOT ILLUSTRATED
7-3291 Circle Guide Kit 1
7-7501 Roller / Radius Circle Cutting Kit – Basic 1
7-7507 Air Filter Kit 1
7-8910 Cutting Guide Kit – Deluxe 1
7-8911 Straight Line Cutting Guide 1
MANUFACTURER POWER SUPPLY MODEL Part No.
‘EURO’ FITTING – LINCOLN, EWS, CASTOLIN, CEBORA, SELCO, CEMONT, HELVI, CEA, STEL, CIFI, FRIMAR, JACKLE, TRAFIMET,BINZEL
7-3470EL
HYPERTHERM®
Powermax® 380 Powermax® 600 w/Int. Q.D. Powermax® 1000, 1250 Powermax® 800. 900 Powermax® 1100 Powermax® 1650 Max® 42, 43, 40cs Max® 40, HT 40 (HF Start) Max® 70, 80,100 w/wo Q.D.
7-34777-34807-34617-34817-34557-34837-34547-3430
ESAB® (yellow)
CaddyCut, PCM-SMi, 500i, 625i, PCS-43, HandyPlasma 50PCS-53, 80, 90 ESP-100i, LPH 120 LPH 50/80, PCM-750i, 875, 1000i, 1125, HandyPlasma 70
7-34257-34357-34267-3429
CEBORA®
Prof 36, 52, 70 7-3471EL
MILLER®
*Plazcut 60/Zipcut Spectrum 250D, 500, 750 Spectrum 700, 1000, 1250, PLUSSpectrum 3080 Spectrum 701, 2050, 650 Spectrum 300 Spectrum 375
7-34327-34337-34307-34567-34577-34767-3477
OERLIKON®
CITOARCAP15-1,AP25-2,AP217,AP225 7-3471EL
THERMAL
PAK® 3XR, 5XT, 5XR, 6XR, 7XR, 625XR, 750XR 7-3446
DYNAMICS®
PAK® 8XR, 10XR, 1000XR, 1250XR, PakMasterTM 75, 100PakMasterTM 50XL/XLP, 75XL/XLP, 100XL/XLP CUTMASTERTM 50, 75, 80XL, 100, PakMasterTM 25, 38XL, EconoPAK® 25 Drag-Gun® 38, PAK® 4Xi, 6Xi, PAK® 2XT-220, Dynapak®
110 PakMasterTM 50 c/w Smart Torch (Q.D.) EconoPAK® 50 EconoPAK® 100 PAK® 5 PAK® 10
7-34347-3447
7-3443
7-34457-34497-34507-34447-3436
TORCH ADAPTOR KITS
NOTES:The maximum current output of some of the Power Supplies listed can exceed the maximum rating of the torch. Do not operate the selected RPT Replacement TorchAt current levelsAbove the rating of the torch. EachAdapter Kit includes connection fitting, electrical connectorsAnd installation instruction sheets for the selected power supply.
*The Miller PlazCut machines with Serial Numbers beginning JE Are not compatible with 1TorchTM RPT Torches.
PLASMA
CUTTING
THERMADYNE COMPATIBLE CONSUMABLES
256
PCH-25
Item Part No. Description Qty
1 9-6507 Gas Distributor 1
2 9-6506 Electrode 5
3 9-6500 Tip – Stand Off 10
Item Part No. Description Qty
4 9-6501 Tip – Drag 10
5 9-6003 Shield Cup – Standard 5
Item Part No. Description Qty
1 9-6507 Gas Distributor 1
2 9-6506 Electrode 5
Item Part No. Description Qty
3 9-6501 Tip – Air 10
4 9-6003 Shield Cup 5
Item Part No. Description Qty
1 9-6007 Gas Distributor 1
2 9-6006 Electrode 5
Item Part No. Description Qty
3 9-4476 Tip – Air 10
4 9-6003 Shield Cup 5
1234
1234
12345
Item Part No. Description Qty
1 9-6007 Gas Distributor 1
2 9-6507 Gas Distributor – Long Life 1
3 9-6006 Electrode 5
4 9-6506 Electrode – Long Life 5
5 9-6500 Tip – Stand Off – Long Life 10
Item Part No. Description Qty
6 9-6501 Tip – Drag – Long Life 10
7 9-6000 Tip – 35A – Air 10
9-6002 Tip – Gouging 10
8 9-6003 Shield Cup 5
1
2
3
4
5
6
78
PCH-25 / 38 & 26
PCH / M-28
PCH / M-35
PLAS
MA
CUTT
ING
THERMADYNE COMPATIBLE CONSUMABLES
257
Item Part No. Description Qty
1 9-5633 Electrode 5
2 8-2159 Shield Cup – Phenolic 5
3 9-5779 Shield Cup – Crown Copper 1
Item Part No. Description Qty
4 9-5718 Tip – 10-40A 10
9-5631 Tip – 10-60A 10
8-3321 Tip – 65A 10
9-5724 Tip – Gouging 10
Item Part No. Description Qty
1 8-3331 Electrode Air – Long Life 5
9-5619 Electrode Air – Plated Long Life 5
2 9-5702 Tip – 35A 10
9-5618 Tip – 45-55A 10
9-5707 Tip – 60-70A 10
9-5782 Tip – 80A 10
9-5708 Tip – 105A 10
Item Part No. Description Qty
3 9-5694 Shield Cup – Crown Ceramic 5
4 9-5781 Shield Cup – Phenolic 5
5 9-5617 Shield Cup – Ceramic 5
123 4
12345
Item Part No. Description Qty
1 9-6507 Gas Distributor 1
2 9-6506 Electrode 5
3 9-6501 Tip – Drag 10
Item Part No. Description Qty
4 9-6500 Tip – Stand Off 10
5 9-6003 Shield Cup 5
12345
PCH / M-40
PCH-51
PCH-52
PLASMA
CUTTING
THERMADYNE COMPATIBLE CONSUMABLES
258
PCH-60 / 75 / 76 / 80 / 100XL
Item Part No. Description Qty
1 8-7501 Gas Distributor – Cutting 1
2 8-7508 Gas Distributor – Gouging 1
3 8-7503 Tip – Cutting 35A 10
8-7504 Tip – Cutting 55A 10
8-7505 Tip – Cutting 60A 10
9-7726 Tip – Cutting 60A (PCH/M-60 only) 10
9-7728 Tip – Cutting 80A (PCH/M-60 only) 10
4 8-7506 Tip – Gouging 10
Item Part No. Description Qty
5 9-7501 Coil Spring 10
6 8-7500 Shield Cup 1
7 8-7575 Double Pointed Spacer 1
8 8-7496 Shield Cup c/w Item 10 1
9 8-7498 Shield Cup Body 1
10 8-7497 Copper Heat Shield 1
11 8-7507 Crown Shield Cup c/w Item 12 1
12 8-7499 Crown Shield Only 1
1
2
3
4
567
910
912
11
8
PLAS
MA
CUTT
ING
HYPERTHERM COMPATIBLE CONSUMABLES
259
Item Part No. Description Qty
1 057114 Torch Head – Hand 1
2 020114 Torch Head – Machine 1
3 EA125 O-Ring – Torch Head 10
4 C1521 Electrode 5
5 C1518 Extended Electrode 5
6 020101 Swirl Ring 1
Item Part No. Description Qty
7 C1304 Tip – Hand Torch 10
8 C1305 Pipe Saddle Tip – Machine Torch 10
9 020102 Tip – Machine Torch 10
10 C1370 Extended Tip 10
11 020104 Nozzle Retaining Cap 1
4
5
678
9
10
11
3
3
1
2
MAX 40
PLASMA
CUTTING
HYPERTHERM COMPATIBLE CONSUMABLES
260
MAX 80
Item Part No. Description Qty
1 020189 Torch Head – Hand 1
2 020201 Torch Head – Machine 1
3 EA131 O-Ring – Torch Head 10
4 P1501 Front Insulator 1
5 120433 Electrode – Replaces 020191 5
6 020194 Swirl Ring 1
7 020203 Tip 1.0 – .038 – 40A 10
020345 Tip 1.3 – .052 – 80A 10
020195 Tip 1.5 – .059 – 100A 10
Item Part No. Description Qty
8 020184 Nozzle Retaining Cap 1
9 020397 Contact Tip 1.3 – .052 – 80A 10
020337 Contact Tip 1.5 – .059 – 100A 10
10 020336 Contact Nozzle Retaining Cap 1
11 020335 Spacer Contact Cutting – Hand Torch 1
12 020334 Shield Cup – Machine Torch 1
13 P1516 Locking Nut 1
5678
9
10
1011
12
13
1
34
234
Item Part No. Description Qty
1 220670 Swirl Ring 1
2 220669 Electrode 5
3 220671 Cutting Tip 45A 10
Item Part No. Description Qty
4 220713 Nozzle Retaining Cap 1
5 220674 Hand – Shield 1
6 220673 Machine – Shield 1
5
6
13 24
POWERMAX 45
PLAS
MA
CUTT
ING
HYPERTHERM COMPATIBLE CONSUMABLES
261
POWERMAX 65 / H65 / M65-85 / H85 / M85-105 / H105 / M105
Item Part No. Description Qty
1 220857 Swirl Ring – 45-85A 1
2 220930 Cutting Tip – 45A – FC 10
220941 Cutting Tip – 45A 10
3 220819 Cutting Tip – 65A 10
220816 Cutting Tip – 85A 10
4 220854 Nozzle Retaining Cap – 45A-85A 1
5 220955 Deflector 5
Item Part No. Description Qty
6 220818 Hand Shield – 45-85A 5
7 220817 Machine Shield – 45-85A 5
8 220994 Swirl Ring – 100A 2
9 220990 Cutting Tip – 100A 10
10 220854/105 Nozzle Retaining Cap – 100A 1
11 220992 Hand Shield – 100A 5
12 220993 Machine Shield – 100A 5
5
6
7
11
12
10
1
3
9 8
2
4
Item Part No. Description Qty
1 220013 Swirl Ring 1
Item Part No. Description Qty
2 220016 Nozzle Retaining Cap 1
12
65 & 85A
100Amp
POWERMAX 350 / 380
PLASMA
CUTTING
HYPERTHERM COMPATIBLE CONSUMABLES
262
POWERMAX 600
Item Part No. Description Qty
1 120576 Swirl Ring 1
2 120600 Retaining Cap 1
3 120828 Shield – Hand Torch 1
4 120827 Shield – Machine Torch 1
Item Part No. Description Qty
5 120574 Extended Electrode 5
6 120606 Extended Tip – 35A 10
7 120303 Deflector 5
Item Part No. Description Qty
1 020361 Swirl Ring 1
2 120574 Extended Electrode 5
3 120301 Retaining Cap 1
4 120283 Shield – Hand Torch 1
Item Part No. Description Qty
5 120326 Shield – Machine Torch 1
6 120303 Spring Holder Protection Nut 5
1562
3
4
7
123
4
POWERMAX 800
PLAS
MA
CUTT
ING
5
6
HYPERTHERM COMPATIBLE CONSUMABLES
263
POWERMAX 900
Item Part No. Description Qty
1 120576 Swirl Ring 1
2 120573 Electrode 5
3 120574 Extended Electrode 5
4 120600 Retaining Cap 1
5 120606 Extended Tip – 35A 10
120578 Extended Pipe Saddle Tip – 55A 10
Item Part No. Description Qty
6 120283 Shield – Hand Torch 1
7 120326 Shield – Machine Torch 1
8 120303 Deflector 5
1
2
3
465
78
Item Part No. Description Qty
1 120925 Swirl Ring Max Life 1
2 120926 Electrode 40-80A 5
3 120932 Cutting Tip 40A – Shielded 10
120931 Cutting Tip 60A – Shielded 10
120927 Cutting Tip 80A – Shielded 10
4 120928 Nozzle Retaining Cap 1
5 120929 Shield – Hand 5
120930 Shield – Machine 5
6 220051 Swirl Ring Max Life 1
7 220037 Electrode 100A 5
Item Part No. Description Qty
8 220011 Cutting Tip 100A – Shielded 10
9 220048 Nozzle Retaining Cap 1
10 220065 Shield – Hand 5
11 220047 Shield – Machine 5
12 120979 Deflector 5
13 220006 Tip 40A – Unshielded 10
14 220007 Tip 50A – Unshielded 10
120980 Tip 80A – Unshielded 10
220064 Tip 100A – Unshielded 10
1
6
2
7
3
8
13
14
4
910
12
5
11
POWERMAX 1000 / 1100 / 1250 / 1650
PLASMA
CUTTING
HYPERTHERM COMPATIBLE CONSUMABLES
264
MAX 200 & HT2000
Item Part No. Description Qty
1 220235 Electrode O2 – 200A 1
2 220237 Nozzle O2 – 200A 1
Item Part No. Description Qty
3 220238 Retaining Cap O2 – 200A 1
4 220239 Shield Cap O2 – 200A 1
1234
Item Part No. Description Qty
1 120547 Electrode O2 / Air – 100A 5
120667 Electrode O2 /Air – 200A 5
020415 Electrode Ar/H – 200A 5
2 020689 Nozzle .038 Air – 40A 5
3 020616 Nozzle .055 O2 – 100A (Max 200) 5
020611 Nozzle .059 Air, N2 Ar/H – 100A 5
Item Part No. Description Qty
4 020608 Nozzle .086 Air, N2, Ar/H – 200A 5
020605 Nozzle .082 O2 – 200A 5
020690 Nozzle .055 O2 – 100A (HT2000) 5
5 020423 Retaining Cap 1
6 020448 Shield Cap – Air, N2, Ar/H – 100A 1
020424 Shield Cap – Air, N2, Ar/H, O2 – 200A 1
1
2
3
4
56
HY-SPEED & HT2000
PLAS
MA
CUTT
ING
HYPERTHERM COMPATIBLE CONSUMABLES
265
HPR-130® / HPR-260® / HD-3070® UPGRADE
Item Part No. Description Qty
1 220340 Water Cooling Tube 1
To get the same performance as the original, our electrodes must be used with our water cooling tube
2 220192 Electrode – 30A 5
220552 Electrode – 50A 5
220187 Electrode – 80A 5
220181 Electrode – 130A 5
220352 Electrode – 200A 5
220435 Electrode – 260A 5
3 220180 Swirl Ring – 30A 1
220553 Swirl Ring – 50A 1
220179 Swirl Ring – 80/130A 1
220353 Swirl Ring – 200A 1
220436 Swirl Ring – 260A 1
Item Part No. Description Qty
4 220193 Nozzle – 30A 5
220554 Nozzle – 50A 5
220188 Nozzle – 80A 5
220510 Nozzle – 100A 5
220182 Nozzle – 130A 5
220354 Nozzle – 200A 5
220439 Nozzle – 260A 5
5 220194 Shield – 30A 1
220555 Shield – 50A 1
220189 Shield – 80A 1
220183 Shield – 130A 1
6 220356 Shield – 200A (No XD) 1
220440 Shield – 260A (No XD) 1
5 4 3 2 1
6
PLASMA
CUTTING
ESAB / L-TEC COMPATIBLE CONSUMABLES
266
PT20Item Part No. Description Qty
1 21150 Electrode 5
2 21330 Tip 1.0 – .039 – 50A 10
21329 Tip 1.3 – .051 – 70A 10
21328 Tip 1.5 – .059 – 100A 10
12
PT23 / PT27
Item Part No. Description Qty
1 33366 Electrode 5
2 33367 Swirl Baffle 1
3 21616 Shield Cup – PT27 5
4 21420 Double Pointed Spacer 1
Item Part No. Description Qty
5 33368 Tip 0.93 – .037 – 30A 10
33369 Tip 1.16 – .046 – 50A 10
33418 Tip 1.32 – .052 – 80A 10
12345
PT31 / PT31XL
Item Part No. Description Qty
1 18205 Electrode – Zirconium 5
2 20862 Electrode – Hafnium 5
3 18785 Swirl Baffle – 4 Holes 1
4 20463 Swirl Baffle – 6 Holes 1
5 18866 Tip 1.0 – .039 – 30A 10
Item Part No. Description Qty
6 20860 Tip 0.96 – .038 – 30A 10
21008 Tip 1.07 – .042 – 40A 10
20861 Tip 1.17 – .046 – 50A 10
1
2
3
4
5
6
PLAS
MA
CUTT
ING
PARWELD COMPATIBLE CONSUMABLES
267
XT3000
Item Part No. Description Qty
1 9-6006 Electrode 5
2 9-6007 Swirl Ring 1
Item Part No. Description Qty
3 9-6500 Cutting Tip – 15-30A 10
4 9-6003 Standard Shield Cup 1
1234
XT6000
Item Part No. Description Qty
1 8-7501 Gas Distributor 1
2 8-7503 Cutting Tip – 30-40A 10
8-7504 Cutting Tip – 40-50A 10
8-7505 Cutting Tip – 50-60A 10
8-7506 Gouging Tip 10
Item Part No. Description Qty
3 9-7501 Coiled Contact Spring 1
4 8-7500 Standard Shield Cup c/w XT6006 1
5 8-7575 Pointed Stand Off Spacer 1
6 8-7498 Shield Cup Body for Castle Heatshield 1
7 8-7499 Castle Heat Shield 1
12
345
67
PLASMA
CUTTING
SAF COMPATIBLE CONSUMABLES
268
CP40R / CP100R
Item Part No. Description Qty
1 0408-2404 Electrode – Hafnium 5
0408-2051 Electrode – Zirconium 5
2 0408-2261 Cutting Tip – 1.0mm 10
0408-2262 Cutting Tip – 1.2mm 10
0408-2385 Cutting Tip – 1.6mm 10
Item Part No. Description Qty
3 0408-2267 Protective Nozzle Guide – TN 1
4 0408-2405 Ceramic Assembly c/w Boss 1
5 0408-2268 Ceramic Guide – TI 1
6 C1397 Guide Spring 5
1
2
3
4
5
6
PLAS
MA
CUTT
ING
MILLER COMPATIBLE CONSUMABLES
269
ICE-25C
Item Part No. Description Qty
1 176-655 Electrode 5
2 176-657 Swirl Ring 1
Item Part No. Description Qty
3 176-656 Tip 0.75 – .030 10
4 220016 Nozzle Retaining Cap 1
Item Part No. Description Qty
1 176-655 Electrode 5
2 202-809 Swirl Ring 1
Item Part No. Description Qty
3 176-656 Tip 0.75 – .030 10
4 020184 Nozzle Retaining Cap 1
Item Part No. Description Qty
1 020361 Swirl Ring 1
2 177-875 Electrode 5
Item Part No. Description Qty
3 180-340 Extended Electrode 5
4 177-876 Extended Tip 10
1234
1234
1234
ICE-27C
ICE-50C
ICE-55C
Item Part No. Description Qty
1 120576 Swirl Ring 1
2 177-875 Electrode 5
3 192-051 Tip – Standard 10
Item Part No. Description Qty
4 180340 Extended Electrode 5
5 192-052 Extended Tip – 35A 10
192-056 Extended Tip – 55A 10
123 45
PLASMA
CUTTING
MILLER COMPATIBLE CONSUMABLES
270
ICE-70 / ICE-100
56
7
7
8
9
10
1
34
234
Item Part No. Description Qty
1 171-257 Torch Head – Hand 1
2 171-245 Torch Head – Machine 1
3 EA131 O-Ring – Torch Head 10
4 70C02 Front Insulator 1
5 169-217 Electrode 5
Item Part No. Description Qty
6 020184 Nozzle Retaining Cap 1
7 020336 Contact Nozzle Retaining Cap 1
8 020335 Spacer Contact Cutting – Hand Torch 1
9 020334 Shield Cup – Machine Torch 1
10 P1516 Locking Nut 1
Item Part No. Description Qty
1 123-899 Electrode – APT5000 / APT7000 5
2 123-897 Shield Cup – APT5000 Only 5
Item Part No. Description Qty
3 123-898 Tip 1.0 – 50A – APT5000 / APT7000 10
134-338 Tip 1.2 – 70A – APT5000 / APT7000 10
132
APT5000 /APT7000
PLAS
MA
CUTT
ING
CONNECTORS CENTRAL PLASMA
271
PLASMA TORCH & MACHINE CENTRAL CONNECTORS
TORCH SIDE
Item Part No. Description Qty
A C530 Complete Connector – No Pins 1
1 C537 Adaptor Body Only – No Pins 1
2 C543 Male to Female Pin Connector 5
3 C538 Male to Female Contact Pin 5
4 C542 Screw 5
5 C539 Plastic Nut Adaptor 1
6 C540 Central Housing 1
MACHINE SIDE
Item Part No. Description Qty
B C554 Complete Connector – 6 SocketsTo suit pin position 1, 2, 3, 5, 6 & 9
1
7 C555 Adaptor Body Only – No Pins 1
8 C556 Fixing Nut 1
9 C557 Socket c/w 0.5m Cable – Black 10
C558 Socket c/w 0.5m Cable – Red 10
C559 Socket c/w 0.5m Cable – Blue 10
3
4
5
6
2
17
8
9
9
B
A
PLASMA
CUTTING
CIRCLE CUTTING KITS & ADJUSTMENTS
272
1236
4
5
A B
CIRCLE CUTTING KITS CIRCLE CUTTING KIT ATTACHMENTSItem Part No.
(Circle Kit)Part No. (Guide Only)
Description Qty
A & B CK-1 CG-51 Cebora P35/P50 1
CK-2 CG-52 Cebora P90/P120/P150 Trafimet A90/A140/R145Ergocut A101/A141/A151
1
CK-3 CG-53 Cebora P70 1
CK-4 CG-54 Cebora CP90 1
CK-5 CG-55 Trafimet S25/S25K/S30/S35K/S45 SWP CUT 40, 70 & 100
1
CK-6 CG-56 Trafimet A53/S54/A60/A80/A81 1
CK-8 CG-58 Hypertherm Powermax 600/800/900/1000/1650 Miller ICE-50C/55C
1
CK-9 CG-59 Hypertherm Max40/42 1
CK-10 CG-60 Hypertherm Max80/100 Miller ICE-70/100
1
CK-12 CG-62 Binzel PSB31/31K 1
CK-13 CG-63 Binzel PSB60/80/121 1
CK-14 CG-64 SAF CP40R/100R 1
CK-15 CG-65 Thermal Dynamics PCH51 1
CK-17 CG-67 Thermal Dynamics PCH10/25/26/28/35/40/60/75/76/80/100XL
1
51864 51802 Digi Cut 100 CNC 1
Item Part No. (Circle Kit)
Description Qty
1 CKA-01 Magnetic Base 17mmFor All Kits excluding CK-2, CK-10 & CK-15
1
CKA-02 Magnetic Base 22mmFor Kits CK-2, CK-10 & CK-15 Only
1
2 CKA-03 Free Centreing Pin 17mmFor All Kits excluding CK-2, CK-10 & CK-15
1
CKA-04 Free Centreing Pin 22mmFor Kits CK-2, CK-10 & CK-15 Only
1
3 CKA-05 Locking Pin 17mmFor All Kits excluding CK-2, CK-10 & CK-15
1
CKA-06 Locking Pin 17mmFor Kits CK-2, CK-10 & CK-15 Only
1
4 CKA-07 Radius Bar 250mmFits All Kits
1
5 CKA-08 Radius Bar 400mmFits All Kits
1
6 CKA-09 Allen Wrench Fits All Kits
1
PLAS
MA
CUTT
ING