TopsAll Machined Mold Clamps - DME - Global Mold Based ... · TB5845 High-Strength T-Slot Bolt,...
13
210 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices TopsAll ® Line Machined Mold Clamps • A fast-adjusting, easy-to-handle design that reduces setup time • Each clamp built to strict standards of premium quality steel, hardened for long- lasting life with black penetrate finish to prevent rust • Available as complete assemblies or as individual parts 4” Machined Open Toe Clamp - 5 ⁄8 – 11 Thread TopsAll ® Machined Mold Clamps Clamp Body No-Turn Washer Grade 5, Hex Head Clamping Screws X-Large Adj. Screw Hex Head Adj. Screw T-Slot Bolts Hex Nuts XL-Round Mold Washers Round Mold Washers 2 3 / 8” 4” 2¾” 1¾” ¾” 1” 7 / 8” 5 / 8” minimum adjustment maximium adjustment Part Number Description HD584 4” Heavy-Duty Open Toe Clamp Body S5832 Grade 5, Hex Head Clamping Screw, 3 1 ⁄ 4” Under Hex S5835 Grade 5, Hex Head Clamping Screw, 3 1 ⁄2” Under Hex S5837 Grade 5, Hex Head Clamping Screw, 3 3 ⁄ 4” Under Hex H58 Hex Head Adjusting Screw RW58 Round Mold Washer, 5 ⁄8 I.D., 1 1 ⁄ 4” O.D., 1 ⁄ 4” Thickness RW586 Extra Large Round Mold Washer, 5 ⁄8” I.D., 1 3⁄4” O.D., 1 ⁄2” Thickness SW587 No-Turn Washer for 5 ⁄8–11 Thread, 2 1 ⁄ 4” Length H585 Extra Large Adjusting Screw - 3” Overall Length TB5845 High-Strength T-Slot Bolt, 4 1 ⁄2” Length N58 Heavy-Duty Hex Nut for T-Slot Bolt TAC584A Complete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
Transcript of TopsAll Machined Mold Clamps - DME - Global Mold Based ... · TB5845 High-Strength T-Slot Bolt,...
210 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
TopsAll® LineMachined Mold Clamps
• A fast-adjusting, easy-to-handle design that reduces setup time
• Each clamp built to strict standards of premium quality steel, hardened for long-lasting life with black penetrate finish to prevent rust
• Available as complete assemblies or as individual parts
4” Machined Open Toe Clamp - 5⁄8 – 11 ThreadTopsAll® Machined Mold Clamps
Clamp BodyNo-Turn Washer
Grade 5, Hex Head Clamping Screws
X-Large Adj. Screw
Hex Head Adj. Screw
T-Slot Bolts
Hex Nuts XL-Round Mold Washers
Round Mold Washers
23/8”
4”
2¾”
1¾”
¾”1”
7/8”
5/8”
minimumadjustment
maximiumadjustment
Part Number
Description
HD584 4” Heavy-Duty Open Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8 I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra Large Round Mold Washer, 5⁄8” I.D., 1 3⁄4” O.D., 1⁄2” Thickness
SW587No-Turn Washer for 5⁄8–11 Thread, 21⁄4” Length
H585Extra Large Adjusting Screw - 3” Overall Length
TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC584AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
B
211U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
5” Machined Open Toe Clamp - 5⁄8 –11 ThreadMachined Mold Clamps
Part Number
Description
HD755 5” Heavy-Duty Open Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757No-Turn Washer for 3⁄4–10 Thread, 21⁄2” Length
H755Extra Large Adjusting Screw - 31⁄2” O.A.L.
TB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
TAC755AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
5” Machined Open Toe Clamp - 3⁄4 –10 ThreadTopsAll® Machined Mold Clamps
Part Number
Description
HD585 5” Heavy-Duty Open Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8” I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra Large Round Mold Washer, 5⁄8” I.D., 13⁄4” O.D., 1⁄2” Thickness
SW587No-Turn Washer for 5⁄8–11 Thread, 21⁄4” Length
H585 Extra Large Adjusting Screw - 3” O.A.L.TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC585AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
3¼”
5”
1¾”
¾”
5/8”
7/8”
1”
minimumadjustment
23/8”
maximumadjustment
5”
33/8”
2”
5/8”
¾”
7/8”
11/8”
minimumadjustment
23/8”
maximumadjustment
212 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
6” Machined Open Toe Clamp - 5⁄8 – 11 ThreadMachined Mold Clamps
Part Number
Description
HD586 6” Heavy-Duty Open Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8” I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra Large Round Mold Washer, 5⁄8” I.D., 13⁄4” O.D., 1⁄2” Thickness
SW587No-Turn Washer for 5⁄8–11 Thread, 21⁄4” Length
H585 Extra Large Adjusting Screw - 3” O.A.L.TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC586AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
6” Extra Heavy-Duty Open Toe Clamp - 5⁄8 – 11 ThreadTopsAll® Machined Mold Clamps
6”
3¾”
¾”
1¾”
1”
5/8”
7/8”
23/8”
minimumadjustment
maximumadjustment
1¼”
6”
35/8”
1¾”
5/8”
¾”
7/8”
23/8”
minimumadjustment
maximumadjustment
Extra Heavy DutyPart Number
Description
XHD58606” EXTRA Heavy-Duty Open Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8” I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra-Large Round Mold Washer, 5⁄8” I.D., 13⁄4” O.D., 1⁄2” Thickness
SW587No-Turn Washer for 5⁄8–11 Thread, 21⁄4” Length
H585 Extra-Large Adjusting Screw - 3” O.A.L.TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC5860AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
B
213U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
6” Machined Closed Toe Clamp - 5⁄8 – 11 ThreadMachined Mold Clamps
Part Number
Description
HD756 6” Heavy-Duty Open Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757No-Turn Washer for 3⁄4–10 Thread, 21⁄2” Length
H755 Extra Large Adjusting Screw - 31⁄2” O.A.L
TB7550 High-Strength T-Slot Bolt, 5” Length
N75 Heavy-Duty Hex Nut for T-Slot Bolt
TAC756AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
Extra Heavy DutyPart Number
Description
XHD58616” Extra Heavy-Duty Closed Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8” I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra Large Round Mold Washer, 5⁄8” I.D., 13⁄4” O.D., 1⁄2” Thickness
SW587No-Turn Washer for 5⁄8-11 Thread, 21⁄4” Length
H585 Extra Large Adjusting Screw - 3” O.A.L.TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC5861AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
6” Machined Open Toe Clamp - 3⁄4 – 10 ThreadTopsAll® Machined Mold Clamps
6”
1¼”
1¾”
25/8”
5/8”
¾”
7/8”
minimumadjustment
maximumadjustment
23/8”
6”
1¼”
1¾”
25/8”
5/8”
¾”
7/8”
minimumadjustment
maximumadjustment
23/8”
214 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
61⁄2” Machined Open Toe Clamp - 3⁄4 – 10 ThreadMachined Mold Clamps
Extra Heavy DutyPart Number
Description
XHD756561⁄2” Extra Heavy-Duty Open Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757No-Turn Washer for 3⁄4–10 Thread, 21⁄2” Length
H755 Extra Large Adjusting Screw - 31⁄2” O.A.LTB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
TAC7565AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
Extra Heavy DutyPartNumber
Description
XHD756661⁄2” Extra Heavy-Duty Closed Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757No-Turn Washer for 3⁄4–10 Thread, 21⁄2” Length
H755 Extra Large Adjusting Screw - 31⁄2” O.A.LTB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
TAC7566AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
61⁄2” Machined Closed Toe Clamp - 3⁄4 – 10 ThreadTopsAll® Machined Mold Clamps
4”
2”
5/8”
¾”
7/8”
1½”
minimumadjustment
23/8”
maximumadjustment
6½”
6½”
2”
1½”¾”
5/8”
7/8”
minimumadjustment
23/8”
maximumadjustment
2¾”
B
215U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
7” Machined Open Toe Clamp - 5⁄8 – 11 ThreadMachined Mold Clamps
PartNumber
Description
HD587 7” Heavy-Duty Open Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8” I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra Large Round Mold Washer, 5⁄8” I.D., 13⁄4” O.D., 1⁄2” Thickness
SW587No-Turn Washer for 5⁄8–11 Thread, 21⁄4” Length
H585 Extra Large Adjusting Screw - 3” O.A.L.TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC587AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
PartNumber
Description
HD757 7” Heavy-Duty Open Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757No-Turn Washer for 3⁄4 –10 Thread, 21⁄2” Length
H755Extra Large Adjusting Screw - 31⁄2” O.A.L.
TB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
TAC757AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
7” Machined Open Toe Clamp - 3⁄4 – 10 ThreadTopsAll® Machined Mold Clamps
7”
4¼”
5/8”
¾”
7/8”
1”
1¾”
minimumadjustment
23/8”
maximumadjustment
7”
5/8”
¾”
7/8”
2”
minimumadjustment
23/8”
11/8”
maximumadjustment
43/8”
216 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
71⁄2” Machined Open Toe Clamp - 5⁄8 – 11 ThreadMachined Mold Clamps
Extra Heavy DutyPartNumber
Description
XHD587571⁄2” Extra Heavy-Duty Open Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8 I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra Large Round Mold Washer, 5⁄8” I.D., 13⁄4” O.D., 1⁄2” Thickness
SW587 No-Turn Washer for 5⁄8–11 Thread, 21⁄4” LengthH585 Extra Large Adjusting Screw - 3” O.A.L.TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC5875AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
71⁄2” Machined Closed Toe Clamp - 5⁄8 – 11 ThreadTopsAll® Machined Mold Clamps
Extra Heavy DutyPartNumber
Description
XHD587671⁄2” Extra Heavy-Duty Closed Toe Clamp Body
S5832Grade 5, Hex Head Clamping Screw, 31⁄4” Under Hex
S5835Grade 5, Hex Head Clamping Screw, 31⁄2” Under Hex
S5837Grade 5, Hex Head Clamping Screw, 33⁄4” Under Hex
H58 Hex Head Adjusting Screw
RW58Round Mold Washer, 5⁄8 I.D., 11⁄4” O.D., 1⁄4” Thickness
RW586Extra Large Round Mold Washer, 5⁄8” I.D., 13⁄4” O.D., 1⁄2” Thickness
SW587 No-Turn Washer for 5⁄8–11 Thread, 21⁄4” LengthH585 Extra Large Adjusting Screw - 3” O.A.L.TB5845 High-Strength T-Slot Bolt, 41⁄2” LengthN58 Heavy-Duty Hex Nut for T-Slot Bolt
TAC5876AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
7½”
1¼”
5/8”
¾”
7/8”
1¾”
minimumadjustment
23/8”
45/8”
maximumadjustment
7½”
1¼”¾”
5/8”
3 5/8”
7/8”
minimumadjustment
23/8”
maximumadjustment
1¾”
B
217U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
8” Machined Open Toe Clamp - 3⁄4 – 10 ThreadMachined Mold Clamps
Extra Heavy DutyPartNumber
Description
XHD7580 8” Extra Heavy-Duty Open Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757No-Turn Washer for 3⁄4 –10 Thread, 21⁄2” Length
H755 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
HX6Case Hardened Hex Nut for T-Slot Bolts -11⁄4” across flats
TAC7580AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
PartNumber
Description
HD758 8” Heavy-Duty Open Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757 No-Turn Washer for 3⁄4 –10 Thread, 21⁄2” LengthH755 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
HX6Case Hardened Hex Nut for T-Slot Bolts -11⁄4” across flats
TAC758AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
8” Machined Open Toe Clamp - 3⁄4 – 10 ThreadTopsAll® Machined Mold Clamps
8”
5/8”
¾”
7/8”
2”
minimumadjustment
23/8”
11/8”
maximumadjustment
53/8”
8”
5”
5/8”
¾”
7/8”
2”
minimumadjustment
23/8”
1½”
maximumadjustment
218 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
8” Machined Closed Toe Clamp - 3⁄4 – 10 ThreadMachined Mold Clamps
Extra Heavy DutyPartNumber
Description
XHD75818” Extra Heavy-Duty Closed Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757 No-Turn Washer for 3⁄4–10 Thread, 21⁄2” LengthH755 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
HX6Case Hardened Hex Nut for T-Slot Bolts -11⁄4” across flats
TAC7581AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
Extra Heavy DutyPartNumber
Description
XHD1008 8” Extra Heavy-Duty Open Toe Clamp Body
S1045Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
S1050Grade 5, Hex Head Clamping Screw, 5” Under Hex
S1055Grade 5, Hex Head Clamping Screw, 51⁄2” Under Hex
H100 Hex Head Adjusting Screw 1–8 thread size
RW100Round Mold Washer, 1” I.D., 2” O.D., 5⁄16” Thickness
RW1006Extra Large Round Mold Washer, 1” I.D., 21⁄2” O.D., 5⁄8” Thickness
SW1007 No-Turn Washer for 1–8 Thread, 3” LengthH1005 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB1060 High-Strength T-Slot Bolt, 6” LengthN100 Heavy-Duty Hex Nut for T-Slot Bolt
TAC1008AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
8” Machined Open Toe Clamp - 1 – 8 ThreadTopsAll® Machined Mold Clamps
8”
5/8”
¾”
7/8”
2”
minimumadjustment
23/8”
1½”
maximumadjustment
3¾”
8”
5/8”
¾”
7/8”
2½”
minimumadjustment
23/8”
1¾”
maximumadjustment
43/8”
B
219U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
8” Machined Closed Toe Clamp - 1 – 8 ThreadMachined Mold Clamps
Extra Heavy DutyPartNumber
Description
XHD10098” Extra Heavy-Duty Closed Toe Clamp Body
S1045Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
S1050Grade 5, Hex Head Clamping Screw, 5” Under Hex
S1055Grade 5, Hex Head Clamping Screw, 51⁄2” Under Hex
H100 Hex Head Adjusting Screw 1–8 thread size
RW100Round Mold Washer, 1” I.D., 2” O.D., 5⁄16” Thickness
RW1006Extra Large Round Mold Washer, 1” I.D., 21⁄2” O.D., 5⁄8” Thickness
SW1007 No-Turn Washer for 1–8 Thread, 3” LengthH1005 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB1060 High-Strength T-Slot Bolt, 6” LengthN100 Heavy-Duty Hex Nut for T-Slot Bolt
TAC1009AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
Extra Heavy DutyPartNumber
Description
XHD759591⁄2” Extra Heavy-Duty Open Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757 No-Turn Washer for 3⁄4–10 Thread, 21⁄2” LengthH755 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
HX6Case Hardened Hex Nut for T-Slot Bolts -11⁄4” across flats
TAC7595AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
91⁄2” Machined Open Toe Clamp - 3⁄4 – 10 ThreadTopsAll® Machined Mold Clamps
3”
8”
5/8”
¾”7/8”
2½”
minimumadjustment
23/8”
1¾”
maximumadjustment
6”9½”
1½”
5/8”
¾”
7/8”
2”
minimumadjustment
23/8”
maximumadjustment
220 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
91⁄2” Machined Closed Toe Clamp - 3⁄4 – 10 ThreadMachined Mold Clamps
10” Machined Open Toe Clamp - 1 – 8 ThreadTopsAll® Machined Mold Clamps
PartNumber
Description
HD110 10” Heavy-Duty Open Toe Clamp Body
S1045Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
S1050Grade 5, Hex Head Clamping Screw, 5” Under Hex
S1055Grade 5, Hex Head Clamping Screw, 51⁄2” Under Hex
H100 Hex Head Adjusting Screw 1–8 thread size
RW100Round Mold Washer, 1” I.D., 2” O.D., 5⁄16” Thickness
RW1006Extra Large Round Mold Washer, 1” I.D., 21⁄2” O.D., 5⁄8” Thickness
SW1007 No-Turn Washer for 1–8 Thread, 3” LengthH1005 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB1060 High-Strength T-Slot Bolt, 6” LengthN100 Heavy-Duty Hex Nut for T-Slot Bolt
TAC110AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
9½”
4¾”
1½”
5/8”
¾”
7/8”
2”
minimumadjustment
23/8”
maximumadjustment
63/8”
11”
2½”
1¾”
5/8”
¾”
7/8”
minimumadjustment
23/8”
maximumadjustment
Extra Heavy DutyPartNumber
Description
XHD759691⁄2” Extra Heavy-Duty Closed Toe Clamp Body
S7540Grade 5, Hex Head Clamping Screw, 4” Under Hex
S7545Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
H75 Hex Head Adjusting Screw
RW75Round Mold Washer, 3⁄4” I.D., 11⁄2” O.D., 1⁄4” Thickness
RW756Extra Large Round Mold Washer, 3⁄4” I.D., 2” O.D., 1⁄2” Thickness
SW757 No-Turn Washer for 3⁄4 –10 Thread, 21⁄2” LengthH755 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB7550 High-Strength T-Slot Bolt, 5” LengthN75 Heavy-Duty Hex Nut for T-Slot Bolt
HX6Case Hardened Hex Nut for T-Slot Bolts -11⁄4” across flats
TAC7596AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
B
221U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
11” Machined Open Toe Clamp -1 – 8 ThreadMachined Mold Clamps
Extra Heavy DutyPartNumber
Description
XHD101211” Extra Heavy-Duty Closed Toe Clamp Body
S1045Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
S1050Grade 5, Hex Head Clamping Screw, 5” Under Hex
S1055Grade 5, Hex Head Clamping Screw, 51⁄2” Under Hex
H100 Hex Head Adjusting Screw 1–8 thread size
RW100Round Mold Washer, 1” I.D., 2” O.D., 5⁄16” Thickness
RW1006Extra Large Round Mold Washer, 1” I.D., 21⁄2” O.D., 5⁄8” Thickness
SW1007 No-Turn Washer for 1–8 Thread, 3” LengthH1005 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB1060 High-Strength T-Slot Bolt, 6” LengthN100 Heavy-Duty Hex Nut for T-Slot Bolt
TAC1012AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
Extra Heavy DutyPartNumber
Description
XHD101111” Extra Heavy-Duty Open Toe Clamp Body
S1045Grade 5, Hex Head Clamping Screw, 41⁄2” Under Hex
S1050Grade 5, Hex Head Clamping Screw, 5” Under Hex
S1055Grade 5, Hex Head Clamping Screw, 51⁄2” Under Hex
H100 Hex Head Adjusting Screw 1–8 thread size
RW100Round Mold Washer, 1” I.D., 2” O.D., 5⁄16” Thickness
RW1006Extra Large Round Mold Washer, 1” I.D., 21⁄2” O.D., 5⁄8” Thickness
SW1007 No-Turn Washer for 1–8 Thread, 3” LengthH1005 Extra Large Adjusting Screw - 31⁄2” O.A.L.TB1060 High-Strength T-Slot Bolt, 6” LengthN100 Heavy-Duty Hex Nut for T-Slot Bolt
TAC1011AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
11” Machined Closed Toe Clamp -1 – 8 ThreadTopsAll® Machined Mold Clamps
63/8”
11”
2½”
1¾”
5/8”
¾”
7/8”
minimumadjustment
23/8”
maximumadjustment
5”
11”
2½”
1¾”
5/8”
¾”
7/8”
minimumadjustment
23/8”
maximumadjustment
222 U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 [email protected] • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
13” Machined Closed Toe Clamp -11⁄4 – 7 ThreadMachined Mold Clamps
Extra Heavy DutyPartNumber
Description
XHD1500131⁄2” Extra Heavy-Duty Closed Toe Clamp Body
S1506Grade 5, Hex Head Clamping Screw, 6” Under Hex
RW1506Extra Large Round Mold Washer, 11⁄2” I.D., 31⁄2” O.D., 5⁄8” Thickness
H1505Extra Large Adjusting Screw - 55⁄8” O.A.L.
TAC1500AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
Extra Heavy DutyPartNumber
Description
XHD125013” Extra Heavy-Duty Closed Toe Clamp Body
S1256Grade 5, Hex Head Clamping Screw, 6” Under Hex
RW1256Extra Large Round Mold Washer, 11⁄4” I.D., 3” O.D., 5⁄8” Thickness
H1505Extra Large Adjusting Screw - 55⁄8” O.A.L.
TAC1250AComplete Assembly - Mold Clamp, Adjusting Screw, Mold Washer & Clamping Screw
131⁄2” Machined Closed Toe Clamp - 11⁄2 – 6 ThreadTopsAll® Machined Mold Clamps
3”
13”5½”
1¾”
5/8”
¾”
7/8”
minimumadjustment
23/8”
maximumadjustment
5¾”
13½”
3½”
1¾”
5/8”
¾”
7/8”
minimumadjustment
23/8”
maximumadjustment
