Top of window detail - dorken.com · the information in this detail drawing is accurate. dorken...
9
DELTA®-DRY & LATH Manufactured stone Concrete foundation wall Insulation Sill plate gasket Exterior sheathing WRB installed as per manufacturer's specifications Scratch coat Mortar Bottom of wall detail Bottom of window detail Top of window detail Top of wall detail DELTA®-DRY & LATH TITLE: 4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA 1-888-433-5824 or 1-905-563-3255 SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS DETAIL DRAWING IS ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN THE USE OF THIS MATERIAL OR IN THE PREPARATION OF ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN DETAIL CAN SUBSTITUTE FOR EXPERIENCED ENGINEERING AND PROFESSIONAL JUDGEMENT. DRAWN BY: Krzysztof Apriasz C. Tech., CPHC® DELTA®-DRY & LATH RAINSCREEN APPLICATION WITH MANUFACTURED STONE File Name: DRY1_LATH Date: November 27, 2108 **For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage** NOTE: WRB (WATER-RESISTIVE BARRIER) TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS
Transcript of Top of window detail - dorken.com · the information in this detail drawing is accurate. dorken...
DELTA®-DRY & LATH
Manufactured
stone
Concrete
foundation wall
Insulation
Sill plate gasket
Exterior sheathing
WRB installed as per
manufacturer's specifications
Scratch coat
Mortar
Bottom of wall detail
Bottom of window detail
Top of window detail
Top of wall detail
DELTA®-DRY & LATH
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY: Krzysztof Apriasz C. Tech., CPHC®
DELTA®-DRY & LATH RAINSCREEN
APPLICATION WITH
MANUFACTURED STONE
File Name: DRY1_LATHDate: November 27, 2108
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
Min.
3
8
" gap between flashings
for ventilation
DELTA®-DRY & LATH
Scratch coat
Mortar
Manufactured
stone
WRB
Option 1.
J-trim
(metal preferred)
Flashing w/ drip edge
(metal preferred)
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY:
DATE: November 27, 2108
SCALE: NTS
FILE NAME:
DRY&LATH_B1
DELTA®-DRY LATH RAINSCREEN APPLICATION
WITH MANUFACTURED STONE BOTTOM OF WALL
DETAIL OPTION 1
Krzysztof Apriasz C. Tech., CPHC®
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
Min.
3
8
" gap between flashings
for ventilation
DELTA®-DRY & LATH
Scratch coat
Mortar
Manufactured
stone
WRB
Option 2.
Weep screed
(metal preferred)
Flashing w/ drip edge
(metal preferred)
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY:
DATE: November 27, 2018
SCALE: NTS
FILE NAME:
DRY&LATH_B2
DELTA®-DRY & LATH RAINSCREEN APPLICATION
WITH MANUFACTURED STONE BOTTOM OF WALL
DETAIL OPTION 2
Krzysztof Apriasz C. Tech., CPHC®
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
Min.
3
8
" gap between flashings
for ventilation
DELTA®-DRY & LATH
Scratch coat
Mortar
Manufactured
stone
Molding piece 2" min. leg
depending on local
wind conditions
WRB
Option 1.
Wood blocking
cut to fit on site
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY:
DATE: November 27, 2018
SCALE: NTS
FILE NAME:
DRY&LATH_T1
DELTA®-DRY & LATH RAINSCREEN APPLICATION
WITH MANUFACTURED STONE TOP OF WALL
DETAIL OPTION 1
Krzysztof Apriasz C. Tech., CPHC®
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
Min.
3
8
" gap between flashings
for ventilation
DELTA®-DRY & LATH
Scratch coat
Mortar
Manufactured
stone
Aluminum flashing 2" min.leg
depending on local
wind conditions
WRB
Option 2. "L" flashing
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY:
DATE: November 27, 2018
SCALE: NTS
FILE NAME:
DRY&LATH_T2
DELTA®-DRY & LATH RAINSCREEN APPLICATION
WITH MANUFACTURED STONE TOP OF WALL
DETAIL OPTION 2
Krzysztof Apriasz C. Tech., CPHC®
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
WRB
DELTA®-DRY & LATH
Scratch coat
Mortar
Manufactured
stone
Flashing w/ drip edge
(metal preferred)
Min.
3
8
" gap between
flashing for ventilation
WRB
DELTA®-DRY
& LATH
Scratch coat
Mortar
Manufactured
stone
Sealant
Backer rod
Around window and door
openings install WRB as
per manufacturer's specifications
TOP OF WINDOW DETAIL BOTTOM OF WINDOW DETAIL
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DRKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY:
November 27, 2108
SCALE: NTS
FILE NAME:
DRY&LATH_W1
DELTA®-DRY & LATH RAINSCREEN APPLICATION
WITH MANUFACTURED STONE WINDOW DETAIL
Krzysztof Apriasz C. Tech., CPHC®
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
Conventional stucco
finish
Scratch coat
DELTA®-DRY &
LATH
WRB
Exterior sheathing
Manufactured
stone
Scratch coat
DELTA®-DRY &
LATH
Backer rod
Sealant
Min.
3
8
" gap for
ventilation
DELTA®-DRY & LATH
J-trim
(metal preferred)
Flashing w/ drip edge
(metal preferred)
Min.
3
8
" gap for
ventilation
Flashing w/ drip edge
(metal preferred)
J-trim
(metal preferred)
DELTA®-DRY & LATH
STUCCO TO STUCCO
TYPICAL TRANSITION
MANUFACTURED STONE TO
STUCCO TYPICAL TRANSITION
4" min.
4" min.
2" min.
2" min.
DELTA®-BUG SCREEN
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY:
DATE: November 27, 2018
SCALE: NTS
FILE NAME:
DRY&LATH_TRANSITION1
TYPICAL WALL TRANSITION DETAILS
OPTION 2.
Krzysztof Apriasz C. Tech., CPHC®
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
Conventional stucco
finish
Scratch coat
Fabric mortar screen
DELTA®-DRY &
LATH
WRB
Exterior sheathing
Manufactured
stone
Scratch coat
WRB
DELTA®-DRY &
LATH
Backer rod
Sealant
Min.
3
8
" gap for
ventilation
DELTA®-DRY & LATH
J-trim
(metal preferred)
Flashing w/ drip edge
(metal preferred)
Min.
3
8
" gap for
ventilation
Flashing w/ drip edge
(metal preferred)
J-trim
(metal preferred)
DELTA®-DRY & LATH
STUCCO TO STUCCO
TYPICAL TRANSITION
MANUFACTURED STONE TO
STUCCO TYPICAL TRANSITION
4" min.
4" min.
2" min.
2" min.
DELTA®-BUG SCREEN
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY:
DATE: November 27, 2108
SCALE: NTS
FILE NAME:
DRY&LATH_TRANSITION2
TYPICAL TRANSITION DETAIL
OPTION 2.
Krzysztof Apriasz C. Tech., CPHC®
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
Min.
3
8
" gap between flashings
for ventilation
DELTA®-DRY & LATH
Scratch coat
Mortar
Manufactured
stone
WRB
J-trim
(metal preferred)
Exterior sheathing
Copper shield
(optional)
DELTA®-DRAIN
Waterproofing membrane
Slo
ped g
rade
DELTA®-BUG SCREEN
TITLE:
4655 DELTA WAY BEAMSVILLE, ON. L0R 1B4 CANADA
1-888-433-5824 or 1-905-563-3255
SUBSTANTIAL EFFORT HAS BEEN MADE TO ENSURE THAT
THE INFORMATION IN THIS DETAIL DRAWING IS
ACCURATE. DORKEN SYSTEMS INC. CANNOT ACCEPT
RESPONSIBILITY FOR ANY ERRORS OR OVERSIGHTS IN
THE USE OF THIS MATERIAL OR IN THE PREPARATION OF
ARCHITECTURAL OR ENGINEERING PLANS. THE DESIGN
PROFESSIONAL MUST RECOGNIZE THAT NO DESIGN
DETAIL CAN SUBSTITUTE FOR EXPERIENCED
ENGINEERING AND PROFESSIONAL JUDGEMENT.
DRAWN BY: Krzysztof Apriasz C. Tech., CPHC®
MANUFACTURED STONE BELOW GRADE
WITH DELTA®-DRY & LATH
File Name: DRY&LATH1_MSBDate: November 27, 2018
**For proper performance of DELTA®-DRY & LATH ensure top and bottom remain open to allow ventilation and drainage**
NOTE:
WRB (WATER-RESISTIVE BARRIER) TO BE
INSTALLED AS PER MANUFACTURER'S
SPECIFICATIONS
