Tools - robofest.lk 4_English.pdf · All the listed tools are not necessary for carrying out a...
Transcript of Tools - robofest.lk 4_English.pdf · All the listed tools are not necessary for carrying out a...
Tools
All the listed tools are not necessary for carrying out a small project.
NUT PLIER
Long Nose PLIER
Bent Nose PLIER Precision Cutting PLIER
Combination PLIER Crimping Tool
Antistatic Tweezers
W-82 // TORX WRENCH SET// TORX Screw Drivers SET Wire Stripper
STUBBY SCREWDRIVER Hex wrenches
Hot Tweezers
Nut Drive Set (with ratchet) Jewellery type Screw Driver set
Hozan S-320 TOOL KIT Contain all the required tools
Soldering Station (Low Voltage)
Temperature controlled low voltage soldering iron (Electrically Isolated with AC mains and free
of Static charges) with holding stand
Contactless Soldering Station
Hot air soldering gun with temperature controlled adjustable air flow for SMD soldering
20/200W switchable Soldering Iron (Goot)
Soldering Iron: 2 stage heat switching system with Ceramic Coated Soldering bit
Input Voltage 220-240V AC 50/60Hz
Power Consumption High 200W / Low 20W
Precision PCB Soldering Irons
This model is fitted with a highly
efficient ceramic pipe heater. The sharp
tip offers accuracy and ease of operation,
while the short distance between the grip
and the tip is perfect for precision work.
De soldering Guns (Goot)
Anti-static and self-cleaning nozzle
Soldering Iron Holders
Safety Goggle
To use in cutting and grinding activities
Magnifying Glass with light
Vise
Low Lint Non-Slip Gloves
Wrist Strap
Avoid electrostatic discharge and protect sensitive electronic devices. •Larger snap with improved durability. •Adjustable band length. •1 MΩ resistor in electrical path from person to ground.
Protect the skin burn.
MODEL Weight Dia. Sn M.P.
SE-55010
500g
φ1.0mm 50% 183—215°C
SE-55012 φ1.2mm
SE-56006 φ0.6mm
60% 183—190°C SE-56008 φ0.8mm
SE-56010 φ1.0mm
MODEL Description M.T. Dia. Sn Weight
SE-2AG08 Ag solder 178-211°C φ0.8mm 60%
200g SE-26308 Eutectic solder 183-184°C φ0.8mm 63%
SE-2ST16 Stainless use solder 183-184°C φ1.6mm 63%
SE-2BA16 Metal work use solder 183-227°C φ1.6mm 45%
Lead free solder
MODEL M.T. Dia. Composition Weight
SF-A0403
217-220°C
φ0.3mm
Sn,Ag,Cu
96.5-3.0-0.5 45g
SF-A0404 φ0.4mm
SF-A0406 φ0.6mm
SF-A0408 φ0.8mm
SF-A0410 φ1.0mm
Solder Paste Solder Assist - For holding, removing and leverage of chips and electronics components.
Components
Monolithic Capacitors
Use for noise and spark suppression and filter circuit
102 - 10 x 102 pF = 1000 pF = 1 nF
Electrolytic Capacitors
Use for power supply filter circuits. They must be connected in proper polarity.
Do not exceed the working voltage beyond the rated voltage.
Infrared Sensors
LDR
Photo Diode
Infrared Diode (LED)
Transistors 2N2222
2N3904 C828 D400 D313
Transistor Arrays ULN2003 ULN2803 Rectifying Diodes
1N4001 to 1N4007 (1A) High Current Diode
Signal Diodes 1N4148
ICs L298 LM324 LM358 / MC1458 NE555 Resistors
Multi turn Presets
Geared Motor (12Vdc, 200 RPM)
Motor Characteristics
Voltage: 12Vdc
Current (no load) = 115mA
Current (rated load) = 285 mA
Speed (no load) = 200 RPM
Speed (rated load) = 163 RPM
Rated Load = 0.78Kg-cm
Reduction Ratio: 30:1
External Motor Shaft for adding Quadrature Encoder
Dimensions
Length (motor & gear): 4.2 cm
Dia. (motor & gear): 3.7 cm
Shaft Length: 1.85cm
Shaft Dia.: 6mm References http://www.active-robots.com/ http://www.goot.co.jp/e/ http://www.hozan.co.jp/E/