Tool sets - FORTE spol. s r.o

Tool Storage

Teng Tools

1

CYAN MAGENTA YELLOW BLACK STIBOINFO((LUNA KATALOG BODY 1))

Tool sets

No 12239

Teng Tools. Tool sets of 1001 pieces. Supplied in tool boxes TC803N and TC806NF as well as tool trolley TCW801N.Table of contents - separate tools as well as TT and TTX sets:Top drawer 1/6: hex keys in millimetre and imperial sets, TX-key set and mini screwdriver set.Top drawer 4/6: TTHEX7 - art. no. 6883-0106, TTNR81 - art. no. 6893-0106, TTTX7 - art. no. 6892-0107, TTHR81 - art. no.6921-0101.Top drawer 5/6: TT1236 - art. no.2756-0101, TTALU - art. no. 0389-0100, TTTM03 - art. no. 10946-0105, TT6208 - art. no.0390-0107.Top drawer 6/6: TTPS09 - art. no. 10621-0107.Middle drawer 1/3: TTPC09 art. no. 6922-0101, TTID20 - art. no. 10210-0104, TTRS04 - art. no. 11769-0107,TT00 - art. no.0416-0107.Middle drawer 2/3: TTHP08 - art. no. 10212-0102, TT6506 - art. no. 7300-0101, TT6010M - art. no. 10947-0104, TT3592 - art. no.5805-0303.Middle drawer 3/3: TTXPB3 - art. no.10069-0106, TTX6311 - art. no. 6891-0157.Drawers in tool trolley.Drawer 1/10: TTXEXT13 - art. no. 6887-0104, TT1205 - art. no. 0357-0108, TT1435 - art. no. 0349-0109, TT3819 - art. no.0352-0103, TT1217 - art. no. 0357-0207.Drawer 2/10: TTTX23 - art. no. 6886-0105, TTHEX23 - art. no. 6885-0106, TTALU - art. no. 0389-0100, TTXMDT - art. no.10213-0101, TT9116 - art. no. 6880-0101.Drawer 3/10: TTX918 - art. no. 6897-0102, TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 - art. no.14403-0103,TTMI16 - art. no. 10445-0101.Drawer 4/10: TTX474-9 - art. no. 11270-0104, TT440-T - art. no. 10982-0101, TT474-7 - art. no. 0403-0102, TT474-5 - art. no.11252-0101, TTHC03 - art. no. 11842-0108.Drawer 5/10: TTX1292 - art. no. 7319-0100, TTV440 - art. no. 11749-0102, TTCP121 - art. no. 11038-0102, TTV907 - art. no.11750-0108, TT01 - art. no. 0416-0206.Drawer 6/10: TTX01 - art. no. 10945-0106, TT804 - art. no. 0398-0109, TTOS16 - art. no. 0396-0101, TTSN11 - art. no.6934-0107, TTTD17 - art. no. 6919-0106.Drawer 7/10: TTX2032 - art. no. 6891-0108, TTX3892 - art. no. 10211-0104, TTXPB3A - art. no. 11783-0106.Drawer 8/10: TTXMDN - art. no. 11459-0102, TTPSPG - art. no. 10623-0105.Drawer 9/10: TTX2640 - art. no. 6891-0207, TTTXH15 - art. no. 11889-0102, TT1215AF - art. no. 0357-0306, TTAF32 - art. no.6861-0104, TTTX30 - art. no. 10214-0100.Drawer 10/10: TTX3404 - art. no. 10153-0103, TTX3414 - art. no. 10154-0102.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12239 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCMM1001NNo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 200

Tool Storage

Teng

Too

ls

2


Tool sets

No 14435

Teng Tools. Tool set containing 900 pieces for the car workshops sector supplied in tool trolley TCW810N, and tool boxesTC806NF and TC803N, all equipped with bearing mounted extending drawers.Contents per drawer:Top drawer 4/6: TTHEX7 - art. no. 6893-0106, TTHR81 - art. no. 6921-0102, TTTX7 - art. no. 6892-0107, TTNR81 - art. no.10619-0101.Top drawer 5/6: TT1236 - art. no. 2756-0101, TTTM03 - art. no. 10946-0105, TT6508R - art. no. 10973-0101, TTTX30 - art. no.10214-0100.Top drawer 6/6: TTPS09 - art. no. 10621-0107.Middle drawer 1/3: TTPC09 - art. no. 6922-0101, TTID20 - art. no. 10210-0104, TTSR04 - art. no. 11769-0107, TT804 - art. no.0398-0109.Middle drawer 2/3: TT7203 - art. no. 12821-0101, TT6010M - art. no. 10947-0104, TT6208 - art. no. 0390-0107, TTHC03 - art. no.11842-0108.Middle drawer 3/3: TTX6311 - art. no. 6891-0157, TTXPB3 - art. no 10069-0106.Drawer 1/10 in tool trolley: TTXEXT13 - 6887-0104, TT1435 - 0349-0109, TT3819 - art. no. 0352-0103, TT1205 - art. no.0357-0108, TT1217 - art. no. 0357-0207.Drawer 2/10 in tool trolley: TTXMDT - art. no. 10213-0101, TT1211 - art. no. 12209-0103, TTTX23 - art. no. 6886-0105, TTHEX_- art. no. 6885-0106, TTHT28 - art. no. 12825-0107.Drawer 3/10 in tool trolley: TTX918 - art. no. 6897-0102, TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 -art. no. 14403-0103, TTMD12D - art. no. 12865-0108.Drawer 4/10 in tool trolley: TTX474-9 - art. no. 11270-0109, TT440-T - art. no. 10982-0101, TT474-7 - art. no. 0403-0102,TT474-5 - art. no. 11252-0101, TTVG05 - art. no. 12248-0106.Drawer 5/10 in tool trolley: TTX1292 - art. no. 7319-0100, TTCP04 - art. no. 12247-0107, TTBS35 - art. no. 13215-0103,TTHP08 - art. no. 10212-0102, TTOS16 - art. no. 0396-0101.Drawer 6/10 in tool trolley: TTXMDN - art. no. 11459-0102, TTHEX7AF - art. no. 6893-0205, TT1215AF - art. no. 0357-0306,TTAF32 - art. no. 6861-0104, TT6508RAF - art. no. 10973-0200.Drawer 7/10 in tool trolley: TTX00 - art. no. 10103-0203, TT9024 - art. no. 13247-0105, TT9116 - art. no. 6880-0101, TT9207 -art. no. 13246-0106, TT9212TX - art. no. 12813-0101.Drawer 8/10 in tool trolley: TTX01 - art. no. 10945-0106, TTTD17 - art. no. 6919-0106, TTSN11 - art. no. 6934-0107, TTNF12 -art. no. 12843-0105, TT01 - art. no. 0416-0206.Drawer 9/10 in tool trolley: TTX3892 - art. no. 10210-0104, TTPSPG - art. no. 10623-0105.Drawer 10/10 in tool trolley: TTXPB3 - art. no. 11786-0106, TTX2032 - art. no. 6891-0108.Also includes ABS-TOP - art. no. 11254-0109, TCBP - art. no. 12222-0106, 580C - art. no. 11788-0104 and 580D art. no.11788-0203, TCF01 - art. no. 11754-0104, TC-COVER1 - 14401-0204.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14435 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCMMAUTO1No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 900Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 232

Tool Storage

Teng Tools

3


Tool sets

No 14436

Teng Tools. Tool set containing 831 pieces for the industrial sector supplied in tool trolley TCW810, and tool boxes TC806NFand TC803N, all equipped with bearing mounted extending drawers.Contents per drawer:Top drawer 4/6: TTTX7 - art. no. 6892-0107, TTHEX7 - art. no. 6893-0106, TTHEX7AF - art. no. 6893-0205, TTHR81 - art. no.10619-0101.Top drawer 5/6: TT1236 - art. no. 2756-0101, TTTM03 - art. no. 10946-0105, TT6508R - art. no. 10973-0101, TTTX30 - art. no.10214-0100.Top drawer 6/6: TTPS09 - art. no. 10621-0107.Middle drawer 1/3: TTPC09 - art. no. 6922-0101, TTID20 - art. no. 10210-0104, TTSR04 - art. no. 11769-0107, TT00 - art. no.0416-0107.Middle drawer 2/3: TT7203 - art. no. 12821-0101, TT6506 - art. no. 7300-0101, TT6010M - art. no. 10947-0104, TT6208 - art. no.0390-0107.Middle drawer 3/3: TTX6311 - art. no. 6891-0157, TTXPB3 - art. no. 11786-0106.Drawer 1/10 in tool trolley: TTXEXT13 - art. no. 6887-0104, TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1205 -art. no. 0357-0108, TT1217 - art. no. 0357-0207.Drawer 2/10 in tool trolley: TTXMDT - art. no. 10213-0101, TT1211 - art. no. 12209-0103, TTTX23 - art. no. 6886-0105,TTHEX23 - art. no. 6885-0106, TTHT28 - art. no. 12825-0107.Drawer 3/10 in tool trolley: TTX918 - art. no. 6897-0102, TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 -art. no. 14403-0103, TTMD12D - art. no. 12865-0108.Drawer 4/10 in tool trolley: TTX474-9 - art. no. 11270-0109, TT440-T - art. no. 10982-0101, TT474-7 - art. no. 0403-0102,TT474-5 - art. no. 11252-0101, TTVG05 - art. no. 12248-0106.Drawer 5/10 in tool trolley: TTX1292 - art. no. 7319-0100, TTCP04 - art. no. 12247-0107, TTV440 - art. no. 11749-0102, TTV907- art. no. 11750-0108, TTBS35 - art. no. 13215-0103.Drawer 6/10 in tool trolley: TTX01 - art. no. 10945-0106, TTTD17 - art. no. 6919-0106, TTSN11 - art. no. 6934-0107, TTNF12 -art. no. 12843-0105, TT01 - art. no. 0416-0206.Drawer 7/10 in tool trolley: TTX9415 - art. no. 12208-0104, TT9024 - art. no. 13247-0105, TT9207 - art. no. 13246-0106,TT9212TX - art. no. 12813-0101, TT9116 - art. no. 6880-0101.Drawer 8/10 in tool trolley: TTXMDN - art. no. 11459-0102, TT1215AF - art. no. 0357-0306, TT3592 - art. no. 5805-0303,TTAF32 - art. no. 6861-0104, TT6508RAF - art. no. 10973-0200.Drawer 9/10 in tool trolley: TTX3404 - art. no. 10153-0103, TTX3414 - art. no. 10154-0102, TTX34AF - art. no. 10154-0201.Drawer 10/10 in tool trolley: TTX2032 - art. no. 6891-0108.Also includes ABS-TOP - art. no. 11254-0109, TCBP - art. no. 12222-0106, 580C - art. no. 11788-0104 and 580D - art. no.11788-0203, TCF01 - 11754-0101, TC-COVER1 - art. no. 14401-0204.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14436 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCMMIND1No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 831Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 252

Tool Storage

Teng

Too

ls

4


Tool sets

No 10624

Teng Tools. Type Mega Master. Tool set with 715 pieces placed in tool trolley TCW810N as well as in tool boxes TC806NF andTC803N.Top drawer 4 contains the sets TTMI16 - art. no. 10445-0101, TTID20 - art. no. 10210-0104, TTPC09 - art. no. 6922-0101andTT01 - art. no. 0416-0206.Top drawer 5 contains the sets TT917 - art. no. 3017-0104, TT440-T - art. no. 10982-0101, TT917TX - art. no. 2598-0103 andTTMD74 - art. no. 14403-0103.Top drawer 6 contains set TTPSPG - art. no. 10623-0105.Middle drawer 1 contains the sets TT804 - art. no. 0398-0109, TTNR81 - art. no. 10619-0101, TTTD17 - art. no. 6919-0106 andTTHP08 - art. no. 10212-0102.Middle drawer 2 contains the sets TTHEX7 - art- no. 6893-0106, TT474-7 - art. no. 0403-0102, TTTX7 - art. no. 6892-0107 andTTHR81 - art. no. 6921-0102.Middle drawer 3 contains the sets TTX6311 - art. no. 6891-0157 and TTXPB3 - art. no. 10069-0106.Drawer 1 in the tool trolley contains the sets TTXEXT13 - art. no 6887-0104, TT1435 - art. no. 0349-0109, TT3819 - art. no.0352-0103, TT1217 - art. no. 0357-0207 and TT1205 - art. no. 0357-0108.Drawer 2 in the tool trolley contains the sets TTX1292 - art. no. 7319-0100, TT9116, - art. no. 6880-0101, TTHEX23 - art. no.6885-0106, TTALU - art. no. 0389-0100 and TTTX23 - art. no. 6886-0105.Drawer 3-6 in the tool trolley without tool sets.Drawer 7 in the tool trolley contains the sets TTX2032 - art. no. 6891-0108, TT1236 - art. no. 2756-0101, TTSN11 - art. no.6934-0107, TTOS16 - art. no. 0396-0101 and TTALU - art. no. 0389-0100.Drawer 8 in the tool trolley contains the sets TTX918 - art. no. 6897-0102 and TTPS09 - art. no. 10621-0107.Drawer 9 in the tool trolley contains the sets TTX2640 - art. no. 6891-0207, TT3592 - art. no. 5805-0303, TTAF32 - art. no.6861-0104, TT1215AF- art. no. 0357-0306 and TTTX30 - art. no. 10214-0100.Drawer 10 in the tool trolley without tool set.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10624 -0203Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCMM715NWeight complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 180

Tool Storage

Teng Tools

5


Tool sets

No 15133

Teng Tools. Tool set for industrial use. Containing 569 parts. Supplied in roller cabinet TCW809N. The roller cabinet has 9 ballbearing drawers. The following TT and TTX -tool sets are supplied.Drawer 1. Emty.Drawer 2. TTXEXT13 - art. no. 6887-0104, TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1205 - art. no.0357-0108, TT1217 - art. no. 0357-0207.Drawer 3. TTX474-9 - art. no. 11270-0109, TT440-T - art. no. 10982-0101, TTVG05 -art. no. 12248-0106, TTDCT05 - artnr14402-0104.Drawer 4. TTXF05 - art. no. 12844-0104, TTTX30 -art. no. 10214-0100, TTBS35 - art. no. 13215-0103, TTTXH15 - artnr11889-0102, TTRS15 - art. no. 14388-0102.Drawer 5. TTX2640 - art. no. 6891-0207, TTAF32 - art. no. 6861-0104, TT1215AF - art. no. 0357-0306, TT3592 -art. no.5805-0303, TT3816 - art. no. 14430-0100.Drawer 6. TTX918 - art. no. 6897-0102, TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 - art. no. 14403-0103,TTDB28 - art. no. 15144-0104.Drawer 7. TTX2032 - art. no. 6891-0108, TT1236 - art. no. 2756-0101, TT6508R - art. no. 10973-0101, TT6208 - art. no.0390-0107, TT474-7 -art. no. 0403-0102.Drawer 8. TTX3404 - art. no. 10153-0103, TTHT28 - art. no. 12825-0107, TTHEX7 - art. no. 6893-0106, TTTX7 - art. no.6892-0107, TTTM08 - art. no. 14437-0103.Drawer 9. TTX3414 - art. no. 10154-0102, TT9207 - art. no. 13246-0106, TT9120D - art. no. 14384-0106, TTID20 - art. no.10210-0104 and 12864-0109.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15133 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCMMIND08No of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . e.a. 569Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 198

Tool Storage

Teng

Too

ls

6


Tool sets

No 9480

Teng Tools. Type Mega Master. Tool sets placed in tool trolley TCW707, tool boxes TC703 and TC706F. TCMM479 containsthe same tools as TCMM600 except the tools on the tool panel and in the drawers 4 and 5 in the tool trolley.Top drawer 1contains sets TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1217 - art. no. 0357-0207, TT1205 - art.no. 0357-0109.Top drawer 2 contains sets TT1236 - art. no. 2756-0101, TT917 - art. no. 3017-0104, TT440 - art. no. 4428-0105, TTALU - art. no.0389-0100.Top drawer 3 contains standard tools such as measuring tape, universal pliers, pipe cutter, ball pein hammer, soft facehammer, small and large hacksaw frames with blades, adjustable wrenches, utility knife, bolt cutter, spark plug plier, spark plugthread cleanders and impact screwdriver.Middle drawer 1 contains sets TTXEXT13 - art. no. 10621-0107, TTX918 - art. no. 6897-0102.Middle drawer 2 contains set TTOS16 - art. no. 0396-0101, TTHEX7 - art. no. 6893-0106, TTX7 - art. no. 6892-0107, TTMI16 -art. no. 10445-0101.Middle drawer 3 contains sets TT917TX - art. no. 2598-0103, TT474-7 - art. no. 0403-0102, TTHEX23 - art. no. 6885-0106,TTTX23 - art. no. 6886-0105.Drawer 1 for the tool trolley contains sets TT804 - art. no.0398-0109, TTSN11- art. no. 6934-0107, TTX2032 - art. no.6891-0108 as well as impact driver, circuit tester, thread cleaning tool, hexagon and TX keys, flexible lamp, vernier caliper andsteel rule.Drawer 2 for the tool trolley contains set TT9116 - art. no. 6880-0101, TTHR81- art. no. 6921-0102, TTPC09 art. no. 6922-0101,TTTD17 - art. no. 6919-0106, TTX1292 art. no. 7319-0100 and swivel handle 1⁄2″.Drawer 3 for the tool trolley contains set of 3 prybars and 4 different pairs of welding grips.Drawer 4 for the tool trolley contains sets TTALU - art. no. 0389-0100, TT3592 - art. no. 5805-0303, TT1215AF - art. no.0357-0306, TTAF32 - art. no. 6861-0104, TTX2640 - art. no. 6891-0207 as well as a hex key set.Drawer 5 for the tool trolley contains sets TTX3404 - art. no. 10153-0103, TTX3414 - art. no. 10154-0102, and TTX34AF - art.no. 10154-0201.Side plate for the tool trolley contains - 10 tool hooks, water pump pliers 16″, bolt cutters 24″, water pump pliers 18″, adjustablewrench 24″, magnetic tool holder and a magnetic bowl.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 9480 -0109 -0208Teng Tools . . . . . . . . . . . . . . . . . . . . . No TCMM600 TCMM479Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 208 161

Tool Storage

Teng Tools

7


Tool sets

No 13173

Teng Tools. Complete tool set of 546 pieces. Supplied in tool trolley TCW808N. The tool trolley features 8 extending drawersmounted on ball-bearing slides.The following TT and TTX sets are included:Drawer 1: TT1205 - art. no 0357-0108, TT1217-6 - art. no. 0357-0256, TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103,TTXEXT13 - art. no. 6887-0104.Drawer 2: TT01 - art. no. 0416-0206, TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTMD74 - art. no. 14403-0103,TTXMDT - art. no. 10213-0101Drawer 3: TT01 - art. no. 0416-0206, TTCP121 - art. no. 11038-0102, TTHEX7 - art. no. 6893-0106, TTHR81- art. no. 6921-0102,TTX00 - art. no. 10945-0106.Drawer 4: TTHT28 - art. no. 12825-0107, TTMD12D - art. no. 12865-0108, TTNF12 - art. no.12843-0105, TTSR04 - art. no.11769-0107, TTXF05 - art. no. 12844-0104.Drawer 5: TT1236 - art. no. 2756-0101, TT440-T - art. no. 10982-0101, TT474-7 - art. no. 0403-0102, TT6208 - art. no.0390-0107, TTX2032 - art. no. 6891-0108.Drawer 6: TT804 - art. no. 0398-0109, TTALU - art. no. 0389-0100 TTPC09 - art. no. 6922-0101, TTTXH15 - art. no. 11889-0102,TTXMDN - art. no. 11459-0102.Drawer 7: TTPS09 - art. no. 11706-0103, TTX01 - art. no. 10945-0106.Drawer 8: Empty.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13173 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCMM546NNo. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 546Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 116.5

Tool Storage

Teng

Too

ls

8


Tool sets

No 12240

Teng Tools. Complete tool set sof 491 pieces. Supplied in tool trolley TCW807N. The trolleys has 7 extending, drawers fittedwith ball bearing slides.The following TT and TTX sets are included.Drawer 1: TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1236 - art. no. 2756-0101, TT6208 - art. no. 0390-0107,TTXMDN - art. no. 11459-0102.Drawer 2: TT917 - art. no. 3017-0104, TT917TX - art. no. 2598-0103, TTHEX7 - art. no. 6863-0106, TTMD50 - art. no.10216-0108, TTXMDT - art. no. 10213-0101.Drawer 3: TT440-T - art. no. 10982-0101, TTPC09 - art. no. 6934-0107, TTCP121 - art. no. 11038-0102, TTTX7 - art. no.6892-0107, TTX00 - art. no. 10103-0203.Drawer 4: TTPS09 - art. no. 10621-0107 TTX01 - art. no. 10945-0106.Drawer 5: TT1217-6 - 0357-0207, TT1205 - art. no. 0357-0108, TTTXH15 - art. no. 11889-0102, TTALU - art. no. 0389-0100,TTXEXT13 - art. no. 6887-0104.Drawer 6: TTHR81 - art. no. 6921-0102, TT804 - art. no. 0389-0109, TT474-7 - art. no. 0403-0102, TT01 - art. no. 0416-0206,TTX2032 - art. no.6891-0108.Drawer 7: Empty.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12240 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCMM491NNo. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 100

Tool Storage

Teng Tools

9


Tool setsTeng Tools. Type Mega Rosso. Set of 187 pieces - containing sockets, socket tools,spanners and bits stored in a sheet metal tool box with foam mat in the box’s lowercompartment and with rubber feet. Removable insert tray made of plastic. The sockets arehoused using clips on two removable aluminium panels. The tools are made of chromevanadium steel and satin finish.

Teng Tools. Tool set for technicians. Tool box with 6 extending drawers and a removabletop drawer. Lockable lock/front which covers the extending drawers. Heavy-duty carryinghandles at the ends.In addition, includes 8 TC trays with tools (see the following description).TT1435. 1⁄4″ socket set, see 0349-0109.TT3819. 3⁄8″ socket set, see 0352-0103.TT1217. 1⁄2″ socket set, see 0357-0207.TT1205. Ratchet handle set 1⁄2″ see 0357-0108.TT1236. 8 Combination spanners in mm-sizes, see 2756-0101.TT917. Screwdriver set of 7 screwdrivers, see 3017-0104.TT440. Set of pliers with 4 pairs of pliers, see 4428-0105.TTALU. 2 aluminium sections and 10 socket clips for 1⁄4″, 3⁄8″, 1⁄2″ see 0389-0100TC modules, see page 0000.Tool sets TC8131NF and TC8140NF with drawers on ball-bearing slides (V-drawerTC806NF).Set TC8140F also contains the sets 1-8, and a 9-part set (TTPS09) with two adjustablewrenches, slip joint pliers, one universal knife, one hacksaw, one soft face hammer, ameasuring tape, a steel rule and a ball hammer.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3588 -0103Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC187No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 1876 point sochets 1⁄4″, short (10). . . . . . . . . . . . . . . mm 4 5 5.5 6 7

8 10 11 12 136 point sockets 1⁄4″, deep (6) . . . . . . . . . . . . . . . . mm 6 7 8 10 12 136 point socketsr 3⁄8, short (14) . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

1516 17 18 19 21 2212 point sockets 1⁄2″, short (16). . . . . . . . . . . . . . mm 10 11 12 13 14 15 1617

18 19 21 22 24 27 30 32Socket clips 1⁄4″ . . . . . . . . . . . . . . . . . . . . . . . . . . . st 30Socket clips 3⁄8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . st 30Socket clips 1⁄2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . st 30Bits 1⁄4-g-drive:Bits for Torx heads (8) . . . . . . . . . . . . . . . . . . . . . TX 8 10 15 20 25 27 30 40Bits for int. hex holes (7) . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 7 8 10Bits for Phillips heads (2). . . . . . . . . . . . . . . . . . . Nr 1 2Bits for Pozidriv heads (2) . . . . . . . . . . . . . . . . . . Nr 1 2Bits for slotted heads (3) . . . . . . . . . . . . . . . . . . . mm 0.8×4.0 1.2×5.5 1.4×7Ratchet heads (3) . . . . . . . . . . . . . . . . . . . . . . . . . tum 1⁄4 3⁄8 1⁄2Universal joints (3) . . . . . . . . . . . . . . . . . . . . . . . . tum 1⁄4 3⁄8 1⁄2Extension bars 1⁄4 (2) . . . . . . . . . . . . . . . . . . . . . . mm 50 100Extension bar 3⁄8 . . . . . . . . . . . . . . . . . . . . . . . . . . mm 150Extension bars 1⁄2 (2) . . . . . . . . . . . . . . . . . . . . . . mm 75 150Reduction adaptor . . . . . . . . . . . . . . . . . . . . . . . . tum 3⁄8-1⁄4 1⁄2-3⁄8Step up adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . tum 3⁄8-1⁄2Bit sockets 1⁄4, 3⁄8 (2) . . . . . . . . . . . . . . . . . . . . . . . tum g-1⁄4Combination spanners (9) . . . . . . . . . . . . . . . . . . mm 8 10 11 12 13 14 15 17 19Holder ring for combination spanners . . . . . . . . st 1Hex keys (3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 11

Tool box without tools. . . . . . . . . . . . . . . . . . . . 3588 -0202Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC450

V-set with drawers on ball-bearing slides . . . . . . . 3572 -0606 -0705Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC8131NF TC8140NFWidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660 660Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305 305Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 380 380Weight incl. tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 42.6 46.4

No 3588

No 3572/TC8131NF

Tool Storage

Teng

Too

ls

10


Tool setsThe unique range of Teng Tools TC tool trays feature hinged click lock lids which are easilyremovable to reveal dove tail joints that enable different TC trays to be locked together andused as trays in Teng Tools boxes and roller cabinets.

The complete master kits and starter kits featured in this section of the catalogue give manydifferent suggested options but the flexibility of the Teng Tools TC tray system means thatalmost any combination is possible.

With a range of 70 TC trays and 23 of the full width TTX trays plus 6 of the drawer size PStrays Teng Tools now gives you the flexibility to compile individual but highly organised toolkits using any of the Teng Tools friction slide or ball bearing slide tool boxes and cabinets.

Another example of Teng Tools commitment to developing patented, design copyrightprotected products that have established Teng Tools as a market leader around the world.

Teng Tools. Type Mega Rosso. Fitted with a rubber mat in the bottom compartment of thechest, rubber feet and 2 removable socket racks of aluminium and 30 socket clips for 1⁄4″, 3⁄8″and 1⁄2″.

Teng Tools have developed their own unique web based computer programme to enableusers and/or stockists to design their own tool kit using any combination of Teng Tools topboxes, middle boxes and roller cabinets together with any of the 70 TT trays, 6 PS trays or 23TTX trays.

To design your own tool kit using click and fill simply visit the www.tengtools.com websiteand click on the click and fill icon.

The programme includes several suggested tool kits that can be changed by adding orremoving tool trays to develop a tool kit to suit your own personal needs, alternatively youcan start with any tool box or combination of boxes and then add the tools that you need tomake your own unique combination.

Teng Tools. Tool box made of plastic Equipped with aluminium handle. Rubber mat in thebottom of the box and rubber feet on the underside. Intended for storage in Teng Tools topdrawer. Easy to move to temporary workplaces.

Tool boxes and roller cabinets

Teng Tools. Of red lacquered steel plate. Five compartments. Lockable with padlock.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3588 -0202Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TC-450Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 450Wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 200Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 200Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 5.5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 11757 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TCA05Length . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 476Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 202Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 80Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11244 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TC422Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 560Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 205Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 205Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 7.0

Build your own tool kit with Teng Tools Click and Fill

Typically Teng

No 11244

No 11757

No 3588/TC-450

Tool Storage

Teng Tools

11


Tool boxes and roller cabinetsThe 8 series range has been developed secially for the industrial market and featu-res:

Teng Tools. Equipped with 4 extending, drawers fitted with ball bearing slides (height: 3 x50 mm and 1 x 75 mm). Lockable lid (incl. removable tote tray). Lock with 2 keys supplied.Heavy/duty carrying handles at the ends. Rubber feet under the chest. Each extendingdrawer holds 4 Teng Tools TC trays.Suitable TC trays see page 0000.

Teng Tools. Sheet metal. Equipped with 4 extending, drawers fitted with ball bearing slides(height: 3 x 50 mm and 1 x 75 mm). Lockable lid (incl. removable top drawer) and drawers.Lock with 2 keys supplied. Heavy-duty carrying handles at the ends. Rubber feet under thechest. Each extending drawer holds 4 Teng Tools TC trays.Suitable TC trays see page 0000.

Teng Tools. Of red lacquered steel plate. Equipped with six extending, drawers fitted withball bearing slides (height: 5 x 50 mm 1 x 75 mm) and removable top drawer. Made of plasticwith aluminium handle. Lockable lock/front which covers the top of the drawer and theextending drawers. Lock with two keys supplied. Heavy-duty carrying handles at the ends.Suitable TC trays see page 0000.

• Drawers that slide out fully so that tools can be accessed more easily.

• 2 step ball bearing slides on all drawers.

• New, improved locking system for added security.

• Swivel lock drawer locking mechanism.

• New, improved side handle on roller cabinets for better manouverability.

• Stylish black handles.

• ABS top with parts storage plus unique divider system in top boxes.

• Heavy duty 5″ wheels on the corners fand reinforced U form wheel base for added strengthand stability.

• Plastic tote tray and EVA mats to avoid scratching.

• Rubber dipped side handles on the top and middle boxes for better grip.

• Heavy duty gauge steel for longer life and stability.

• Powder coating with 5 step rust prevention and undercoating.

• 20 or 25 kilo drawer capacity (25 kilo for roller cabinets).

• Fully suitable for Teng Tools tool tray system for more organised tool storage.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12237 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC804NMax. load per drawer (evenly distributed) . . . . . . . . . . . . . . . . . . kg 20Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 380Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 21

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14379 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC804NSMax. load per drawer (evenly distributed) . . . . . . . . . . . . . . . . . kg 20Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 380Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 21

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12216 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC806NFMax. load per drawer (evenly distributed) . . . . . . . . . . . . . . . kg 20Drawer dimensions (3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 172x270x50Drawer dimensions (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x270x50Drawer dimensions (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x270x75Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 380Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 22

8 series tool storage range

No 12237

No 14379

No 12216

Tool Storage

Teng

Too

ls

12



Teng Tools. Of red lacquered steel plate. Equipped with 3 extending, drawers fitted withball bearing slides, and with removable top tray. Lockable lock/front which covers the top ofthe drawer and the extending drawers. Lock with two keys supplied. Heavy-duty carryinghandle at ends.Suitable TC trays see page 0000.

Teng Tools. Of red lacquered steel plate. Equipped with 5 extra deep, extending drawerswith ball bearing slides (height: 2 x 46 mm, 3 x 75 mm). Each drawer holds 4 TT and 1 TTXinserts. Lockable cover (incl. top drawer in plastic with aluminium handle) and boxes. Lockwith 2 keys supplied. Heavy-duty carrying handles at the ends. Rubber feet under the chest.Suitable TC trays see page 0000.

Teng Tools. Of red lacquered steel plate. Equipped with 3 extending, lockable drawersfitted with ball bearing slides (height: 2 x 50 mm and 1 x 75 mm). Lock with 2 keys supplied.Heavy-duty carrying handles at the ends. Rubber feet under the chest. Each drawer holds 4Teng Tools TC trays.Suitable TC trays see page 0000.

Teng Tools. Of silver lacquered steel plate. Equipped with 3 extending, lockable drawersfitted with ball bearing slides (height: 2 x 50 mm and 1 x 75 mm). Lock with 2 keys supplied.Heavy-duty carrying handles at the ends. Rubber feet under the chest. Each drawer holds 4Teng Tools TC trays.Suitable TC trays see page 0000.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12846 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC803NFMax. load per drawer (evenly distributed) . . . . . . . . . . . . . . . . . kg 20Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 380Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 22

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12219 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC805NFXMax. load per drawer (evenly distributed) . . . . . . . . . . . . . . . . kg 20Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 640Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 490Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 44

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13961 -0109Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC803NSMax. load per drawer (jevently distributed) . . . . . . . . . . . . . . . . kg 20Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 13.8

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12236 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC803NMax. load per drawer (evenly distributed) . . . . . . . . . . . . . . . . . . kg 20Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 13.8

No 13961

No 12236

No 12219

No 12846

Tool Storage

Teng Tools

13


Tool boxes and roller cabinetsTeng Tools. With two fixed castors and two swivel castors with brakes. Equipped with 3extending, lockable drawers fitted with ball bearing slides, and with a lockable storage areabelow.Suitable TC trays see page 0000.

Teng Tools. Of red lacquered steel plate. With two fixed castors and two swivel castorswith brakes. Equipped with 6 extending, lockable drawers on ball-bearing slides (height: 5 x75 mm, 1 x 150 mm). Each drawer has a protective mat in the bottom. Workbench with ABStop mat. Heavy-duty handle for transporting the trolley.Suitable TC trays see page 0000.

Teng Tools. Of silver lacquered steel plate. With two fixed castors and two swivel castorswith brakes. Equipped with 6 extending, lockable drawers on ball-bearing slides (height: 5 x75 mm, 1 x 150 mm). Each drawer has a protective mat in the bottom. Workbench with ABStop mat. Heavy-duty handle for transporting the trolley.Suitable TC trays see page 0000.

Teng Tools. Of red lacquered steel plate. With two fixed castors and two swivel castorswith brakes. Equipped with 7 extending, lockable drawers fitted with ball bearing slides.Each drawer has a protective mat in the bottom. Heavy-duty handle for transporting thetrolley. Workbench with ABS top mat.Suitable TC trays see page 0000.

Tool trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0345 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW803NDrawer size (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x380x75Drawer size (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x380x155Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . . kg 25Storage area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 610x420x250Trolley size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 670x460x760Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 100Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 43.4

Top lock complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0327 -0204

Lower lock complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0345 -0509

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12217 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW806NDrawer size (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x380x75Drawer size (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x380x150Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . kg 25Trolley size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 670x460x760Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 100Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 59

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12218 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW807NDrawer size (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x75Drawer size (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x150Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . kg 25Trolley size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 670x460x950Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 125Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 64

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14380 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW806NSDrawer size (5 pcs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x380x75Drawer size (1 pc) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 572x380x150Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . kg 25Trolley size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 670x460x760Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 100Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 59

No 12218

No 14380

No 12217

No 0345

Tool Storage

Teng

Too

ls

14



Teng Tools. Of red lacquered steel plate. With four swivel castors. Equipped with 8lockable drawers fitted with ball bearing slides. Each drawer has a protective mat in thebottom. Heavy-duty handle for transporting the trolley. Worktop with ABS-top mat.Suitable TC trays, see page 0000.

Teng Tools. With four swivel castors. Equipped with 10 extending, lockable drawers fittedwith ball bearing slides (height: 6 x 50 mm, 3 x 75 mm 1 x 150 mm). Each drawer has aprotective mat in the bottom. Heavy/duty handle for transporting the trolley. The work top isequipped with an ABS mat. Suitable TC trays, see page 0000.

Teng Tools. Of red lacquered steel plate with a wood top plate. 9 With two fixedcastors and two swivel castors with brakes. Equipped with 9 extending, lockabledrawers fitted with ball bearing slides.Suitable TC trays see page 0000.

Teng Tools. Of red lacquered steel plate with a wood top plate. With two fixedcastors and two swivel castors with brakes. Equipped with 6 extending, lockabledrawers fitted with ball bearing slides.Patented one drawer open at a time system.Heawy duty drawer design and extra support bar under the drawers.Suitable TC trays see page 0000.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12873 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW808NDrawer dimensions (7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x75Drawer dimensions (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x150Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . kg 25Trolley size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 670x460x813Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 125Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 61

art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12238 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW810NDrawer size (6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x50Drawer size (3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x75Drawer size (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x150Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . kg 25Trolley size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 750x465x950Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 125Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 69

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15134 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW806LNDrawer size (3) (max. load 40 kg) . . . . . . . . . . . mm 1216x380x65Drawer size (1) (max. load. 50 kg) . . . . . . . . . . . mm 1216x380x100Drawer size (2) (max. load 60 kg) . . . . . . . . . . . mm 1216x380x154Size of trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1350x460x767Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 150Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 121

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15135 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW809NLåddim. (1 st) (max. belastn. 40 kg) . . . . . . . . . . mm 1216x380x124Låddim. (6 st) (max. belastn. 25 kg) . . . . . . . . . . mm 1216x380x100Låddim. (2 st) (max. belastn. 25 kg) . . . . . . . . . . mm 1216x380x150Vagnens storlek . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1350x460x937Hjuldiameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 150Vikt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 136

Nr 15134

Nr 15135

No 12238

No 12873

Tool Storage

Teng Tools

15



Teng Tools. Of red lacquered steel plate. Equipped with 6 extending, drawers fitted withball bearing slides, and with removable top tray. Lockable lock/front which covers the top ofthe drawer and the extending drawers. Lock with two keys supplied. Heavy-duty carryinghandle at ends.Suitable TC trays see page 0000.

Teng Tools. Equipped with 3 extending, lockable drawers fitted with ball bearing slides.Lock with 2 keys supplied. Heavy/duty carry handles on the ends. Rubber feet under thechest. Each drawer holds 4 Teng Tools TC trays.Suitable TC trays see page 0000.

Teng Tools. With two fixed castors and two swivel castors with brakes. Equipped with 7extending, lockable drawers fitted with ball bearing slides. Each drawer has a protective matin the bottom. As an accessory there is a magnetic strip which holds magnetic tools such as screwdrivers,spanners.Suitable TC trays see page 0000.

7 series tool storage range

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3589 -0151Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC706FMax. load per drawer (evenly distributed) . . . . . . . . . . . . . . . . . . . . kg 20Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 660Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 380Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 22

Tool trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4893 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW707Drawer size (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x75Drawer size (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 575x380x150Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . . kg 25Trolley size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 670x460x950Wheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 125Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 64

Magnetic strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0345 -0202Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC-MAGSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 457x52Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Lock complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0327 -0204

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0327 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC703Max. load per drawer (evenly distributed) . . . . . . . . . . . . . . . . . . . . . kg 20Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 662Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 305Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 260Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 13.8

The Teng Tools 7 Series range of top boxes, middle boxes and roller cabinets hasbeen specially developed for the professional user and features:

No 4893

No 0327

No 3589

• Drawers that slide out fully so that tools can be accessed more easily.

• 2 step ball bearing slides on all drawers.

• New, improved locking system for added security.

• Push lock drower locking system.

• New improved soft grip side handle on roller cabinets for better manoeuvrability.

• ABS top with parts storage plus unique divider system in top boxes.

• Heavy duty 5″ wheels on the corners of roller cabinets and reinforced U form wheel base for added strength and stability.

• Plastic tote tray and EVA mats to aviod scratching.

• Rubber dipped side handles on the top and middle boxes for better grip.

• Heavy duty gauge steel for longer life and stability.

• Powder coating with 5 step rust prevention and undercoating.

• 20 or 25 kilo drawer capacity (25 kilo for roller cabinets).

• Fully suitable for Teng Tools tool tray system for more organised tool storage.

Tool Storage

Teng

Too

ls

16



Tool cases

Teng Tools. Cusion custern nonslip rubber feet. Numeric andkey lock, stainless steel handle. Empty case which holds 3x3pcs TT-trays.

Service cases

Teng Tools are able to offer top boxes, middle boxes and roller cabinets in a variety of colours subjet to minimum productionquantities with red and silver available ex-stocks as shown in the catalogue.

In addition personalised tool kit can be especially manufactured using transfer printing to include logos and pictures on thelid of the drop front top boxes. This service is subject to minimum production quantities and minimum print requirements.

Full details of Teng Tools specialist tool box production are available from your Teng Tools distributor.

No 14429

Art. no.. . . . . . . . . . . . 14407 -0109Teng Tools. . . . . . . . . No TC-SCSize. . . . . . . . . . . . . . . mm 500x400x240Weight . . . . . . . . . . . . kg 7.35No 14407

Teng Tools. Tool case TC-SC made of plastic, with nonslip rubber fee, numeric and key lock, stainelss steel bar. Complete with9 TT-sets: TT1217 - art. no. 0357-0207, TT1236 - art. no. 2756-0101, TT440-T - art. no. 10982-0101, TT917 - art. no. 3017-0104,TT917TX - art. no. 2598-0103, TTHEX7 - art. no. 6893-0106, TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1205 -art. no. 0357-0108.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14429 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SC01Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 500x400x240Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 15.75

Tool Storage

Teng Tools

17


Tool casesService cases

No 14439

No 14440

Teng Tools. Tool bag TC-SC made of plastic. With code lock and key lock, Transport castors and extensible transport handle.Complete with 9 x TT-sets: TT440 - art. no. 4428-0105, TTMI16 - art. no. 10445-0101, TTCP121 - art. no. 11038-0102, TTM03 -art. no. 10946-0105, TTNF12 - art. no. 12843-0105,TTDB28 - art. no. 15144-0104, TT6508R - art. no. 10973-0101, TTHT28 - art.no. 12825-0107, TTMD12D - art. no 12865-0108.

Teng Tools. Service case made of plastic, with nonslip rubber feet, numeric and key lock, stainless steel bar. Complete with 9TT-sets: TT440 - art. no. 4428-0105, TTMI16 - art. no. 10445-0101, TTMD12D - art. no. 12843-0105, TT917 - art. no. 3017-0104,TT917TX - art. no. 2598-0103, TTMD74 - art. no. 14403-0103, TT1435 - art. no. 0349-0109, TTBS35 - art. no. 13215-0103,TTTM03 - art. no. 10946-0105. One empty compartment with dividers for necesseties.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14439 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SC02Bag size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 500x400x240Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 14.4

Artn no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14440 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SC03Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 500x400x240Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 14.5

Tool Storage

Teng

Too

ls

18



Teng Tools. PS-service tray with measuring tape MT03, hacksaw frame 701, utility knife710, universal plier401-10, adjustable wrench 4003 and a ball pein hammer HMBP16.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14443 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SCPS01Case size mått LxWxH . . . . . . . . . . . . . . . . . . . . mm 540x262x56Weihgt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.5

No 14441

No 14442

No 14443

Teng Tools. Tool bag TC-SC made of plastic. With code lock and key lock, Transport castors and extensible transport handle.Complete with 6 x TT-sets and one SCPS01E service set: TT1236 - art. no. 2756-0101, TT917 - art. no. 3017-0104, TT440-T - art.no. 10928-0101, SCPS01E - art. no. 14444-0104, TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1218 - art. no3918-0104.

Teng Tools. Service case made of plastic, with nonslip rubber feet, numeric and key lock, stainless steel bar. Complete with 6pc TT-sets and a SCPS01service set:: TT1236 - art. no. 2756-0101, TT917 - art. no. 3017-0104, TT440-T - art. no.10928-0101,SCPS01- art. no. 14443-0105, TT1435 - art. no. 0349-0109, TT3819 - art. no. 0352-0103, TT1218 - art. no. 3918-0104. One emptycompartment with dividers for necesseties.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14442 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SC04EBag size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 500x400x240Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 17.66

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14441 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SC04Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 500x400x240Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 17.66

Tool Storage

Teng Tools

19



Teng Tools. Service case containing measuring tape MT03, hacksaw 701, universal knife710, universal pliers 401-10, adjustable wrench 4003 and pein hammer HMEG500.

Teng Tools. Plastic TC tray with removable lid. Protective mat in the bottom. Also containsa holder for screwdrivers and spanners. Several boxes can be interconnected lengthways.Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Separate TC-tray made of plastic fits in TengTools tool boxes and tool trolleys.

Tool Box for TT Trays

Teng Tools. TC tray with compartment divisions. Made of plastic with removable lid.Several boxes can be interconnected. Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Type Mecca Rosso. Empty plastic box which holds 3 insert trays (TT-trayssize 265x142x50 mm). Click lock and folding handle. The underside of the case is fitted withrubber feet to prevent it from sliding.

Teng Tools. Set consisting of two aluminium sections on which socket clip can be attached.Supplied in a plastic TC tray with removable cover. The bottom of the case is covered with aprotective mat. Fits in Teng Tools tool boxes and tool trolleys.

Tool TraysGeneral Tool Trays

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0416 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . No TT00Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 142Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 50Box size LxWxH . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.24

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0389 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTALUNo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 32Length of the aluminium sections . . . . . . . . . . . . . . . . . . . mm 2x260Number of 1⁄4″ clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Number of 3⁄8″ clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Number of 1⁄2″ clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.65

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0416 -0206Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT01Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 142Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 50Case size LxWxH . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.29

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11464 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC-3Outside dim. WxDxH . . . . . . . . . . . . . . . . . . . . mm 470x320x65Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.4

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14444 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No SCPS01ECase size LxWxH . . . . . . . . . . . . . . . . . . . . mm 540x262x56Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.5

Art. no. . . . . . . . . . . . . . 10103 -0203Teng Tools. . . . . . . . . . . No TTX00Size WxDxH . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . kg 0.3

No 0416

No 0389

No 11464

No 0416

No 14444

No 10103

Tool Storage

Teng

Too

ls

20


Tool TraysGeneral Tool TraysTeng Tools. Separate TC tray with dividers fits in Teng Toolstool boxes and tool trolleys.

Teng Tools. Tool set containing 9 tools: 2 adjustable wren-ches, utility pliers, universal knife, hacksaw frame, soft facehammer, measuring tape, steel rule and ball pein hammer.Supplied in TC tray suitable for Teng Tools tool boxes and tooltrolleys.

Teng Tools. Tool set containing 9 tools: 2 adjustable wrenches,universal pliers, universal knife, hacksaw frame, soft face ham-mer, measuring tape, steel rule and engineer’s hammer.Supplied in TC tray suitable for Teng Tools tool boxes or tooltrolleys.

SocketryTeng Tools. Set containing 11 short 6 point sockets, 6 long 6 point sockets, 11 screwdriverbits, ratchet handle, universal joint, 2 extension bars, 1⁄4″ bit socket, adaptor drive 3⁄8″-1⁄4″ and1⁄4″ screwdriver handle.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . 10945 -0106Teng Tools. . . . . . . . . . . No TTX01Size WxDxH . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . kg 0.4

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . 10621 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . No TTPS09Contents: Adjustable wrenches, length. . . . . . mm 150, 250Universal pliers, length . . . . . . . . . . mm 250Universal knife, length . . . . . . . . . . . mm 160Hacksaw frame, length . . . . . . . . . . mm 300Plastic mallet, weight . . . . . . . . . . . . g 670Measuring tape, length . . . . . . . . . . m 3Steel rule, length. . . . . . . . . . . . . . . . mm 200Ball pein hammer, weight . . . . . . . . g 550Case size LxWxH . . . . . . . . . . . . . . . mm 560x265x40Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 4.45

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 0349 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TT1435Number of pieces. . . . . . . . . . . . . . . . . . ea. 35Sockets, short (11) . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7 8

9 10 11 12 13Sockets, deep (6) . . . . . . . . . . . . . . . . . mm 6 7 8 10 12 13Bits for slotted heads. . . . . . . . . . . . . . . mm 0.8x4 1.2x5.5Bits for Phillip heads . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv heads . . . . . . . . . . . . . No 1 2Bits for TX heads . . . . . . . . . . . . . . . . . . No TPX 10 TPX 15 TPX20Bit for hex holes . . . . . . . . . . . . . . . . . . . mm 5 6Case size LxWxH . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11706 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTPS09EContents: Adjustable wrenches, length . . . . . . mm 150, 250Universal pliers, length. . . . . . . . . . . mm 250Universal knife, length . . . . . . . . . . . mm 160Hacksaw frame, length. . . . . . . . . . . mm 300Soft face hammer, weight . . . . . . . . g 670Measuring tape, length. . . . . . . . . . . m 3Steel rule, length . . . . . . . . . . . . . . . . mm 200Engineer’s hammer, weight . . . . . . . g 800Case size LxWxH . . . . . . . . . . . . . . . mm 560x265x40Weight. . . . . . . . . . . . . . . . . . . . . . . . . kg 3.8

No 0349

No 11706

No 10621

No 10945

Tool Storage

Teng Tools

21


Teng Tools. 30 piece bit socket set. Consisting of adaptor drive 3⁄8″ -1⁄4 ″, extension bar 3⁄8″length 75 mm and 28 socket bits for internal and external TX heads.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Teng Tools. Set containing 1⁄4″ and 3⁄8″ 6-point sockets - short and deep.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Teng Tools. Set containgin 16 pc 6 point deep sockets with 3⁄8″ ❒-drive. Satin finish. Supplied in plastic TC tray with removeable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containing 13 6 point sockets, ratchet handle, universal joint, extensionbar 75 mm, screwdriver handle 250 mm long with 3⁄8″-❒-drive at both ends, adaptor drive1⁄2″-3⁄8″ and 1⁄4″ bit socket.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Tool TraysSocketry

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10214 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTX30Adaptor drive . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8-1⁄4Extension bar, length . . . . . . . . . . . . . . . . . . mm 75TX-bits3⁄8″ . . . . . . . . . . . . . . . . . . . . . . . . . . . . TX- 10 15 20 25 27

30 40 45 50TX-bits3⁄8″ . . . . . . . . . . . . . . . . . . . . . . . . . . . . TPX- 10 15 20 25 27

30 40 45 50TX-bits3⁄8″ . . . . . . . . . . . . . . . . . . . . . . . . . . . . E- 10 12 14 16 18TX-bits 1⁄4″. . . . . . . . . . . . . . . . . . . . . . . . . . . . E- 4 5 6 7 8Case size LxWxH . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no . . . . . . . . . . . . . . . . . . . . . . . . . . . 0352 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TT3819Measurement system. . . . . . . . . . . . . . . MillimetreNo. of pieces . . . . . . . . . . . . . . . . . . . . . . ea. 19Sockets (13) . . . . . . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13

14 15 16 17 18 19 22Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14430 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TT3816Number of socskets. . . . . . . . . . . . . . . . . qty 16Socket size (6-point) . . . . . . . . . . . . . . . . mm 7 8 9 10 11 12

13 14 15 16 17 1819 20 21 22

Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6861 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTAF32Measurement system . . . . . . . . . . . . . . . InchNo. of pieces . . . . . . . . . . . . . . . . . . . . . . ea. 32Sockets 1⁄4″ short . . . . . . . . . . . . . . . . . . . inch 3⁄16 7⁄32 1⁄4 9⁄32 5⁄16

11⁄32 3⁄8 7⁄16 1⁄2Sockets 1⁄4″ deep . . . . . . . . . . . . . . . . . . . inch 3⁄16 7⁄32 1⁄4 9⁄32 5⁄16

11⁄32 3⁄8 7⁄16 1⁄2Sockets 3⁄8″ short . . . . . . . . . . . . . . . . . . . inch 3⁄8 7⁄16 1⁄2 9⁄16 5⁄8 11⁄16 3⁄4Sockets 3⁄8″ deep . . . . . . . . . . . . . . . . . . . inch 3⁄8 7⁄16 1⁄2 9⁄16 5⁄8 11⁄16 3⁄4Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.4

No 14430

No 6861

No 0352

No 10214

Tool Storage

Teng

Too

ls

22


Tool TraysSocketryTeng Tools. Set of 35 pieces. Contains 33 1⁄4″ and 3⁄8″ bit sockets, one adaptor drive(enlarger) 1⁄4″-3⁄8″ and one adaptor drive (reducer) 3⁄8″- 1⁄4″.Supplied in plastic case with removable lid. Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Ratchet handle set containing ratchet handle reversible with lever and withlocking button as well as quick release and shifting of sockets. Also includes universal jointand two extension bars. All with 1⁄2″-❒-drive.The set is supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools toolboxes and tool trolleys.

Teng Tools. Set containing 12 sockets with 12-point or 6-point openings. Also includesratchet handle with reversing thumb lever, extension bars 62 and 150 mm, adaptor drive3⁄8″-1⁄2″ as well as a universal joint.Supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools tool boxesand tool trolleys.

Teng Tools. Set with 10 metric bi-hexagon sockets with 1⁄2″-❒-drive and a swivel handle.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Teng Tools. Socket set containing 17 12 point sockets.The set is supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools toolboxes and tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . 3918 -0104 -0203Teng Tools . . . . . . . . . . . . . . . No TT1218 TT1218-6Measurement system . . . . . . Millimetre MillimetreSocket type . . . . . . . . . . . . . . . 12-point 6-pointNo. of pieces . . . . . . . . . . . . . . ea. 17 17Sockets’ dim. (12) . . . . . . . . . mm 10 11 12 13 14 15

16 17 18 19 22 2410 11 12 13 14 1516 17 18 19 22 24

Case size LxWxH . . . . . . . . . . mm 265x142x50 265x142x50Weight . . . . . . . . . . . . . . . . . . . kg 2.15 2.15

Art. no . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13215 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTBS35No. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 35Bit sockets 1⁄4″ for slotted heads . . . . . . . . . . . . . . . . . . . . . . mm 0 1 2 3

for Phillips cross heads. . . . . . . . . . . . . . . . . No 4 4.5 7for Pozidriv cross heads . . . . . . . . . . . . . . . . No 1 2 3for TX-heads . . . . . . . . . . . . . . . . . . . . . . . . . No 10 15 20 25

27 30 40Bit sockets 3⁄8″ for female hex head . . . . . . . . . . . . . . . . . . . mm 3 4 5 5.5 6

7 8 10 12for female hex head . . . . . . . . . . . . . . . . . . . inch 1⁄8 5⁄32 3⁄16 7⁄32

1⁄4 5⁄16 3⁄8Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.25

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0357 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT1205Extension bars, length. . . . . . . . . . . . . . . . . . . . . . mm 125, 250Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . . . . . . . . . . . 0357 -0207 -0256Teng Tools . . . . . . . . . . . . . . . No TT1217 TT1217-6Measurement system . . . . . . Metric MetricNo. of pieces . . . . . . . . . . . . . . st 17 17Socket system . . . . . . . . . . . . 12 point 6 pointSockets’ dim.. . . . . . . . . . . . . . mm 10 11 12 13 14

15 16 17 18 19 2021 22 24 27 30 32

10 11 12 13 14 15 16 17 18 19 2021 22 24 27 30 32

Case size LxWxH . . . . . . . . . . mm 265x142x50 265x142x50Weight . . . . . . . . . . . . . . . . . . . kg 1.65 1.65

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12209 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT1211Sockets’ dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10 11 12 13 14

15 16 17 18 19 Swivel handle with 1⁄2″-❒-drive, length . . . . . . . . . . . . . . mm 250Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.0

No 12209

No 0357

No 0357

No 13215

No 3918

Tool Storage

Teng Tools

23


Tool TraysSocketryTeng Tools. Set of 16 pieces, mainly for tightening nuts on stud bolts. Contains sockets with19 mm external hexagonal drive which fits the ratchet handle (the sockets have throughholes) 3″ extension bars, ratchet handle with 19 mm internal hex. openings, 3⁄8″ adapter,universal joint, and spark plug sockets 16 and 21 mm.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Socket set containing 15 12 point sockets.The set is supplied in a plastic TC tray with removable cover. The case fit in Teng Tools toolboxes and tool trolleys.

Teng Tools. Set with 3 ratchet handles. The ratchet handles have 72 teeth, are adjustableusing a reversing lever and equipped with a button for locking, removing/switching sockets.Matt chromium plated. Two component handle.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set consisting of 20 sockets for internal hex holes, (short and long bits). Inaddition, includes 2 adaptors and a hexagon screwdriver.Fits in Teng Tools tool boxes and tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14389 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTH16Drive ext. hexagon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 19Socket dimensions, 6-hexagon. . . . . . . . . . . . . . . . . . . mm 10, 11, 12, 13, 14,

15, 16, 17, 18, 19Extension bar, length . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 75Open ratchet handle with int. hex. drive . . . . . . . . . . . mm 19Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8Universal joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8Spark plug socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 16 and 21Insert size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.35

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0357 -0306Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT1215AFMeasurement system . . . . . . . . . . . . . . . . . . Amerikansk AFNo. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . 15Sockets’ dim. . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8 7⁄16 1⁄2 9⁄16 5⁄8

11⁄16 13⁄16 7⁄8 15⁄16

11⁄16 11⁄8 13⁄16 11⁄4Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.7

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6885 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTHEX23Bits 10 mm g-drive, length 40 mm . . . . . . . . . . . . . . . mm 5 6 7 8 9 10Bits 12 mm g-drive, length 40 mm . . . . . . . . . . . . . . . mm 12 14 17 19Bits 10 mm g-drive, length 75 mm . . . . . . . . . . . . . . . mm 5 6 7 8 9 10Bits 12 mm g-drive, length 75 mm . . . . . . . . . . . . . . . mm 12 14 17 19Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1⁄2″ ❒ - 10 mm gAdaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1⁄2″ ❒ - 12 mm gHexagon screwdriver . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.0Case size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12821 -0101Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . No TT7203Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4, 3⁄8, 1⁄2Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 142, 211, 257Case size LxWxH . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

No 6885

No 12821

No 0357

No 14389

Tool Storage

Teng

Too

ls

24


Tool TraysSocketryTeng Tools. Set consisting of 20 bits (short and long) for internal TX heads TX-system. Forhand tightening. In addition, includes two adaptors and a hexagon screwdriver.

Teng Tools. Set containing ratchet handle with flip reverselever and removable ratchet head, two extension bars as well asa T-handle. All with 3⁄4″-drive.Supplied in TTX tray suitable for Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set consisting of fifteen 100 mm long bit sockets, nine for internal TX headsand six for hex type bits. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containing 6 extension bars (drive 1⁄4″, 3⁄8″ and1⁄2″), universal joints 1⁄4″, 3⁄8″ and 1⁄2″, adaptor 3⁄8″- 1⁄4″, as well as aT-handle and mini screwdrivers for hex holes (2.0 and 2.5 mm).As an accessory there is a handle for fitting to the extension bar.A short extension bar is placed in the hole as the handle on thelarger. Together with these extension bars and handle T-HD aT-handle is formed.Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set of 15 pieces. Contains 100 mm long Ribe and XZN-socket bits. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 10153 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TTX3404Extension bars 3⁄4″-❒-drive, length . . . mm 200, 400Case size LxWxH . . . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 6.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6886 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTX23No. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 23Bits 10 mm g-drive length 40 mm . . . . . . . . . . . . . . . TX 20 25 27 30

40 45 50 55Bits 12 mm g-drive length 40 mm . . . . . . . . . . . . . . . TX 60 70Bits 10 mm g-drive length 75 mm . . . . . . . . . . . . . . . TX 20 25 27 30

40 45 50 55Bits 12 mm g-drive length 75 mm . . . . . . . . . . . . . . . TX 60 70Bit socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1⁄2″ ❒ - 10 mm gBit socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1⁄2″ ❒ - 12 mm gHexagon screwdriver . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.0Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 6887 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . No TTXEXT13Extension bars 1⁄4″, length . . . . . . . mm 150 and 300Extension bars 3⁄8″, length . . . . . . . mm 75 and 500Extension bars 1⁄2″, length . . . . . . . mm 75 and 500Case size LxWxH. . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 2.0

Separate handle T-HD. . . . . . . . . . 6887 -0203

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11889 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTXH15No. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 15Sockets for int. TX heads . . . . . . . . . . . . . . . . . . TX 20 25 27 30 40

45 50 55 60Sockets for int. hex holes . . . . . . . . . . . . . . . . . . mm 5 6 7 8 10 12Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.4

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14388 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTRS15Ribe-socket bits 100 mm . . . . . . . . . . . . No 4, 5, 6, 8, 10, 11, 12, 13ZXN-socket bits 100 mm . . . . . . . . . . . . No 5, 6, 8, 10, 12, 14, 16Insert size LxWxH. . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.60

No 14388

No 11889

No 6887

No 6886

No 10153

Tool Storage

Teng Tools

25


Teng Tools. Set of 7 combination spanners in metric sizes.Chrome vanadium steel. Same dimension at both ends. The 12point ring head is angled at a 15° angle. Polished heads. Satinfinish.Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Chrome vanadium steel. Same dimension at both ends. The 12 point ring headis set at a 15° angle. Polished heads. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.As an accessory there is a metal ring/carrying handle that keeps the spanners together, art.no 2756-0200.

Teng Tools. Chrome vanadium steel. Same dimension at both ends. The 12 point ring headis set at a 15° angle. Polished heads. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.As an accessory there is a metal ring/carrying handle that keeps the spanners together, art.no 2756-0200.

Wrenches

Teng Tools. Chrome vanadium steel. Set containing 14 inchsockets with 12 point openings.Supplied in TC tray suitable for Teng Tools tool boxes and tooltrolleys.

Teng Tools. Chrome vanadium steel. Set containing 14 milli-metre sockets with 6 point openings.Supplied in TC tray suitable for Teng Tools tool boxes and tooltrolleys.

SocketryTool Trays

Art. no. . . . . . . . . . . . . . 10154 -0102Teng Tools . . . . . . . . . . No TTX3414Size . . . . . . . . . . . . . . . . mm 19 21 22 24 27 30 32

33 34 36 38 41 46 50Case size LxWxH . . . . mm 560x110x40Weight . . . . . . . . . . . . . . kg 5.5

Art. no.. . . . . . . . . . . 10154 -0201Teng Tools. . . . . . . . No TTX 34AFSize. . . . . . . . . . . . . . inch 7⁄8 15⁄16 1 11⁄16 11⁄8 13⁄16 11⁄4

15⁄16 13⁄8 17⁄16 11⁄2 15⁄8 13⁄4 17⁄8Case size LxWxH . . mm 560x110x40Weight . . . . . . . . . . . kg 5.5

Art. no. . . . . . . . . . . . . . . . . . . . . . 6891 -0108Teng Tools . . . . . . . . . . . . . . . . . . No TTX2032No of keys. . . . . . . . . . . . . . . . . . . 7Measurement system . . . . . . . . . MetricSizes . . . . . . . . . . . . . . . . . . . . . . . mm 20 21 22 24

27 30 32Case size LxWxH . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . kg 2.6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 2756 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . No TT1236No. of keys . . . . . . . . . . . . . . . . . . . . . . 12Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13

14 15 16 17 18 19Case size LxWxH. . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.7

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5805 -0303Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT3592No. of keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 5⁄16 3⁄8 7⁄16 1⁄2

9⁄16 5⁄8 11⁄16 3⁄4Case size LxWxH . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.7

No 6891

No 5805

No 2756

No 10154

No 10154

Tool Storage

Teng

Too

ls

26


Tool TraysWrenchesTeng Tools. Set of 7 combination spanners in AF sizes. Chro-me vanadium steel. Same dimension at both ends. The 12 pointring head is angled at a 15° angle. Polished heads. Satin finish.Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set of 8 ratcheting combinatiuon spanners. Chrome vanadium steel. Combi-ned ringopen-ended spanner and 12 point ring ratchet. Reversible ratchet function withlever. Same size at both ends.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Chrome vanadium steel. Double, with differentsize 12 point sockets at each end. Manufactured according toDIN 838/ISO 3318. Satin finish.Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set of 8 swivel combination ring ratchet spanners made of chrome vanadiumsteel. The ring end swivels 180°. Same size at both ends. Straight spanners are turned whenshifting between right and left-hand action.Supplied in plastic case with removable lock. Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Stubby model. Short spanners made of chrome vanadium steel. Same dimen-sion at both ends. The 12-point ring head is set at a 15° angle. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . 6891 -0157Teng Tools . . . . . . . . No TTX6311No. of keys. . . . . . . . . 11Sizes. . . . . . . . . . . . . . mm 6x7 8x9 10x11 12x13

14x15 16x17 18x19 20x2221x23 24x27 30x32

Case size LxWxH . . . mm 560x110x60Weight . . . . . . . . . . . . kg 2.9

Art. no. . . . . . . . . . . . . . . . . . . . . . 6891 -0207Teng Tools . . . . . . . . . . . . . . . . . . No TTX2640No. of keys . . . . . . . . . . . . . . . . . . 7Measurement system . . . . . . . . . AFSizes . . . . . . . . . . . . . . . . . . . . . . . inch 13⁄16 7⁄8 15⁄16 1

11⁄16 11⁄8 11⁄4Case size LxWxH . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . kg 2.6

Art. no. . . . . . . . . . . . . . . . . . . 10973 -0101 -0200Teng Tools . . . . . . . . . . . . . . . No TT6508R TT6508RAFNo. of keys . . . . . . . . . . . . . . . qty 8 8Sizes . . . . . . . . . . . . . . . . . . . . mm/inch 8 10 11 12

13 14 17 195⁄16 3⁄8 7⁄16 1⁄2

9⁄16 5⁄8 11⁄16 3⁄4Case size LxWxH . . . . . . . . . . mm 265x142x50 265x142x50Weight . . . . . . . . . . . . . . . . . . . kg 1.1 1.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10947 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TT6010MNo. of spanners . . . . . . . . . . . . . . . . . . . . 10Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10 11 12 13 14

15 16 17 18 19Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13190 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TT6508RFNo. of keys . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 8Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 8 10 11 12

13 14 17 19Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

No 13190

No 10973

No 10947

No 6891

No 6891

Tool Storage

Teng Tools

27


Tool TraysWrenchesTeng Tools. Set of 8 double open ended spanners. Chrome vanadium steel. Polishedheads.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set consisting of 3 combined pin/hook spanners with 3 pin adaptors and 2spare pins in diameters 6 and 8 mm.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Chrome vanadium steel. Double, with different size 12 point sockets at eachend. Satin finish. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools toolboxes and tool trolleys.

Teng Tools. Made of chrome vanadium steel - hollow over entire length. 6 double spanners- with different hex openings at each end and a turning bar. Can also be turned with aspanner. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Chrome vanadium steel. Double, with different size 12-point sockets at eachend (6-8mm 6-point). Angled 25° towards the handle. Reversible action. Satin finish.Supplied in plastic box which fits in Teng Tools tool boxes and tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10212 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTHP08Hook spanners for diameter . . . . . . . . . . . . . . mm 19-50 30-75 50-120Pin adaptors with pin diam.. . . . . . . . . . . . . . . mm 4 5 6Separate pins diameter . . . . . . . . . . . . . . . . . . mm 6 8Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.2

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11839 -0103Teng Tools . . . . . . . . . . . . . . . . . . . No TTTW07No. of keys . . . . . . . . . . . . . . . . . . . 6Sizes . . . . . . . . . . . . . . . . . . . . . . . . mm 8x9, 10x11, 12x13,

14x15, 16x17, 18x19Case size LxWxH. . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11670 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . No TTRORSNo. of keys . . . . . . . . . . . . . . . . . . . . 6Sizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 6×8 7x9 10x13

12x14 17x19 21x22Case size LxWxH. . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 1.26

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 7300 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . No TT6506No. of keys . . . . . . . . . . . . . . . . . . . . . 6Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . mm 8×9 10×11 12×13

14×15 16×17 18×19Case size LxWxH . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . kg 1.57Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 0390 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . No TT6208No. of keys . . . . . . . . . . . . . . . . . . . . 8Measurement system . . . . . . . . . . . MetricSizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 6×7 8×9 10×11 12×13

14×15 16×17 18×19 20×22Case size LxWxH. . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8

No 7300

No 11670

No 0390

No 11839

No 10212

Tool Storage

Teng

Too

ls

28


Tool TraysWrenchesTeng Tools. Set of 7 hex keys with T-handle. With ball point head on the long key end -which improves access.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 28 pieces. Contains two hex key sets in metric and imperial sizes(1479MM and 1479AF) a TX-set (1479TX) and a 7 mm hex key with ball point.Supplied in plastic insert case with removable lock. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 7 screwdrivers including flat as well as Phillips and Pozidriv cross-pointtips. With blade of TT-MV steel. Two component handle with hanging hole. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Screwdrivers

Teng Tools. Set of 7 TX-keys with T-handle. For internal TX heads (short end also fortamper proof screws).Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . . . . . 6893 -0106 -0205Teng Tools . . . . . . . . . . . . . . No TTHEX7 TTHEX7AFNo. of keys . . . . . . . . . . . . . . 7 7Sizes . . . . . . . . . . . . . . . . . . . mm/inch 2.5 3 4

5 6 7 83⁄32, 1⁄8, 5⁄32, 3⁄16,

7⁄32, 1⁄4, 5⁄16

Case size LxWxH. . . . . . . . . mm 265x142x50 265x142x50Weight . . . . . . . . . . . . . . . . . . kg 0.72 0.72

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3017 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT917Contents: 1 x MD920 . . . . . . . . . . . . . . . . . . . . . . . . . mm 0.6x3.0x75

1 x MD922 . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5x751 x MD932 . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.4x6.5x1001 x MD940 PH. . . . . . . . . . . . . . . . . . . . . . No 0-751 x MD941 PH. . . . . . . . . . . . . . . . . . . . . . No 1-751 x MD942 PH. . . . . . . . . . . . . . . . . . . . . . No 2-1001 x MD 972 PZ . . . . . . . . . . . . . . . . . . . . . No 2-100

Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.7

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12825 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTHT28No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 28Hex keys 1479MM . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5 3 4

5 6 8 10Hex keys 1479AF . . . . . . . . . . . . . . . . . . . . . . inch 5⁄64 3⁄32 1⁄8 5⁄32 3⁄16

7⁄32 1⁄4 5⁄16 3⁄8Hex key with ball point . . . . . . . . . . . . . . . . . . mm 7TX-keys 1479TX. . . . . . . . . . . . . . . . . . . . . . . TX 8 9 10 15 20

25 27 30 40Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . mm 265xx142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.4

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 6892 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . No TTTX7No. of keys . . . . . . . . . . . . . . . . . . . . . . ea. 7Key sizes . . . . . . . . . . . . . . . . . . . . . . . TX- 10 15 20 25

27 30 40For max. head width . . . . . . . . . . . . . . mm 2.74 3.27 3.86 4.43

4.99 5.52 6.65For screw . . . . . . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4 4.5-5

4.5-6 6-7 7-8Case size LxWxH . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.72

No 3017

No 6892

No 12825

No 6893

Tool Storage

Teng Tools

29


Tool TraysScrewdriversTeng Tools. Set of 7 TX/TPX screwdrivers (2 standard TX and 5 with hole TPX). Forinternal TX heads. Nickel plated blades of TT-MD steel. Handle made of two componentwith hanging hole. Fit in Teng Tools tool boxes and tool trolleys.Supplied in a plastic TC tray with removable cover.

Teng Tools. Set of 12 pieces. Contains one screwdriver handle and 11 separate reversiblescrewdriver blades with a screwdriver tip at each end.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 74 pieces. Consists of a bit ratchet screwdriver, 6″ flexible extension, 4″extension bar, external square 1⁄4″x1⁄4″ hexagonal external adaptor, internal square 1⁄4″x1⁄4″hexagonal internal adaptor and 69 bits.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2598 -0103Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT917TXContents: 1 x MD608T . . . . . . . . . . . . . . . . . . . . . . . TX 8x75

1 x MD609T . . . . . . . . . . . . . . . . . . . . . . . TX 9x751 x MD610TP . . . . . . . . . . . . . . . . . . . . . TPX 10x1001 x MD615TP . . . . . . . . . . . . . . . . . . . . . TPX 15x1001 x MD620TP . . . . . . . . . . . . . . . . . . . . . TPX 20x1001 x MD625TP . . . . . . . . . . . . . . . . . . . . . TPX 25x1001 x MD630TP . . . . . . . . . . . . . . . . . . . . . TPX 30x100

Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.15

Art. no. . . . . . . . . . . . . . . . 12865 -0108Teng Tools . . . . . . . . . . . . No TTMD12DNo. of pieces. . . . . . . . . . . ea. 12Combi-blade . . . . . . . . . . . PH1 x PH2Combi-blade . . . . . . . . . . . flat 4.0 mm x 5.5 mmCombi-blade . . . . . . . . . . . PH1 x 6.5 mm flatCombi-blade . . . . . . . . . . . PZ1 x PZ2Combi-blade . . . . . . . . . . . TX10 x TX15Combi-blade . . . . . . . . . . . TX20 x TX25Combi-blade . . . . . . . . . . . TX30 x TX40Combi-blade . . . . . . . . . . . hex. 3 mm x 3 mm hex with ball pointCombi-blade . . . . . . . . . . . hex. 4 mm x 4 mm hex with ball pointCombi-blade . . . . . . . . . . . hex. 5 mm x 5 mm hex with ball pointCombi-blade . . . . . . . . . . . hex. 6 mm x 6 mm hex with ball pointInsert size LxWxH . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . kg 0.25

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14403 -0103Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . No TTMD74Bits for slotted heads . . . . . . . . . . . . . . . . . . mm 0.6x3.5, 0.6x4.5, 0.8x4.0,

0.8x5.5, 1.0x5.5, 1.2x5.0, 1.2x6.5, 1.4x7.0, 1.6x8.0

Bits for Phillips heads. . . . . . . . . . . . . . . . . . No 1 (4), 2 (7), 3 (1)Bits for Pozidriv heads . . . . . . . . . . . . . . . . . No 1 (4), 2 (7), 3 (1)Bits for hex holes . . . . . . . . . . . . . . . . . . . . . mm 2, 3, 4, 5, 6, 8Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . No 6, 7, 8, 9, 10, 15, 20 (3),

25 (x 3), 27, 30, 40Bits for TPX-slot . . . . . . . . . . . . . . . . . . . . . . No 10, 15, 20 (2), 25 (2),

27, 30, 40Bits for square recessed heads . . . . . . . . . No 1, 2, 3Bits for Grabber crosspoint tip . . . . . . . . . . No 2 (3)Insert size LxWxH. . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.74

No 2598

No 12865

No 14403

Tool Storage

Teng

Too

ls

30


Tool TraysScrewdriversTeng Tools. Set consisting of 12 mini screwdrivers and 4 mini-pliers.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 8 screwdrivers of which are 2 Stubby-screwdrivers. Blade of TT-MV steel. Two component handlewith hanging hole.Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set containing 5 screwdrivers for slotted headsand Phillips heads. With hexagonal through blade. Two compo-nent handle.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Teng Tools. 9 nut drivers with chrome vanadium steel blade. 6point opening. 2 colour ergonomically designed two componenthandle with hanging hole.Supplied in plastic box which fits in Teng Tools tool boxes andtool trolleys.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10445 -0101Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTMI16Contents:Screwdriver MDM 713 . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.0x40Screwdriver MDM714 . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.4x40Screwdriver MDM715 . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3.0x40Screwdriver MDM716 Phillips . . . . . . . . . . . . . . . . . . . . No 00x40Screwdriver MDM 717Phillips . . . . . . . . . . . . . . . . . . . . No 0x40Screwdriver MDM718 Phillips . . . . . . . . . . . . . . . . . . . . No 1x40Screwdriver MDM806TX . . . . . . . . . . . . . . . . . . . . . . . . . No TX 6Screwdriver MDM807TX . . . . . . . . . . . . . . . . . . . . . . . . . No TX 7Screwdriver MDM808TX . . . . . . . . . . . . . . . . . . . . . . . . . No TX 8Screwdriver MDM809TX . . . . . . . . . . . . . . . . . . . . . . . . . No TX 9Screwdriver MDM810TX . . . . . . . . . . . . . . . . . . . . . . . . . No TX 10Screwdriver MDM815TX . . . . . . . . . . . . . . . . . . . . . . . . . No TX 15End cutter MBM449 length . . . . . . . . . . . . . . . . . . . . . . . mm 114Side cutters MBM441 length. . . . . . . . . . . . . . . . . . . . . . mm 114Flat nose pliers MBM461 length. . . . . . . . . . . . . . . . . . . mm 125Flat nose pliers MBM464 length. . . . . . . . . . . . . . . . . . . mm 125Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.65

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 6897 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTX918Contents:Screwdriver MD928. . . . . . . . . . . . . . mm 6.5x38Screwdriver MD921. . . . . . . . . . . . . . mm 3.0x100Screwdriver MD923. . . . . . . . . . . . . . mm 5.5x150Screwdriver MD933. . . . . . . . . . . . . . mm 6.5x150Screwdriver MD934. . . . . . . . . . . . . . mm 8.0x150Screwdriver MD935. . . . . . . . . . . . . . mm 10x200Screwdriver MD948 Phillips . . . . . . . No 2x38Screwdriver MD953 Phillips . . . . . . . No 3x150Case size LxWxH. . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11459 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . No TTXMDNSizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 5 5.5 6 7 8

10 11 12 13Total length of screwdrivers . . . . . . mm 245Insert size . . . . . . . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 1.6

Art. no. . . . . . . . . . . . . . . . . . . . . 10213 -0101Teng Tools . . . . . . . . . . . . . . . . . No TTXMDTDriver thick.xwidthxblade leng. mm 1.4x6.5x100 1.4x8x150

1.4x10x200Phillips head x blade leng. . . . . No 2x100 3x150Case size LxWxH . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . kg 1.27

No 11459

No 10213

No 6897

No 10445

Tool Storage

Teng Tools

31


Teng Tools. Set consisting of 4 circlip pliers (2 straight tip and 2 bent tip pliers for internaland external circlips). Fitted with return spring.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of five self-locking pliers with release lever. Three with serrated, adjus-table jaws with pipe grip and cutters and two with extra narrow, long jaws with smooth gripand cutter.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 5 pieces. Containing two pairs of tin snips, universal knife, snips andcable pliers.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 4 pliers, water pump pliers, combination pliers, side cutters and flat nosepliers. Made of chrome vanadium steel. With ergonomically designed two componenthandle sleeves. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 4 pliers: water pump pliers, combination pliers, side cutters and flat nosepliers. Made of chrome vanadium steel. Plastic covered handles.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

PliersTool Trays

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4428 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT440Contents:Water pump pliers10″ . . . . . . . . . . . . . . . . . . . . . . No MB481Combination pliers 7″ . . . . . . . . . . . . . . . . . . . . . . No MB451Sied cutters 6″ . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MB441Flat nose pliers 8″ . . . . . . . . . . . . . . . . . . . . . . . . . No MB462Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10982 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT440-TContents:Water pump pliers 10″ . . . . . . . . . . . . . . . . . . . . No MB481-10TCombination pliers 7″ . . . . . . . . . . . . . . . . . . . . . No MB452-7TSide cutters 6″ . . . . . . . . . . . . . . . . . . . . . . . . . . . No MB441-6TFlat nose pliers 8″ . . . . . . . . . . . . . . . . . . . . . . . . No MB461-8TCase size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11252 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT474-5Circlip pliers straight internal . . . . . . . . . . . . . . . . . . . . mm 10-25Circlip pliers bent internal. . . . . . . . . . . . . . . . . . . . . . . mm 10-25Circlip pliers straight external . . . . . . . . . . . . . . . . . . . mm 10-25Circlip pliers bent external . . . . . . . . . . . . . . . . . . . . . . mm 10-25Length of pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 125Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14402 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTDCT05Contents:Tin snips straight/right . . . . . . . . . . . . . . . . . . . . No 491Tin snips straight/left. . . . . . . . . . . . . . . . . . . . . . No 492Universal knife . . . . . . . . . . . . . . . . . . . . . . . . . . . No 701NElectrician’s snips . . . . . . . . . . . . . . . . . . . . . . . . No 497Cable pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 496Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . mm 265x280x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.06

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12248 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTVG05Universal pliers 401, lengths . . . . . . . . . . . . . . . . . . mm 100, 175, 250Universal pliers 404, lengths . . . . . . . . . . . . . . . . . . mm 100, 150Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.5

No 11252

No 12248

No 14402

No 10982

No 4428

Tool Storage

Teng

Too

ls

32


Tool TraysPliersTeng Tools. Set consisting of 4 circlip pliers (2 straight tip and 2 bent tip pliers for internaland external circlips). Fitted with return spring.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set consisting of 4 circlip pliers (2 straight tip and 2bent tip pliers for internal and external circlips). Fitted withreturn spring.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Teng Tools. Set containing c clamp, welding, sheet metal and6″ long nose power grip pliers.Supplied in PS-tray suitable for Teng Tools tool boxes and tooltrolleys.

Torque ToolsTeng Tools. The set includes one torque screwdriver, 1⁄4″ extension bar 100 mm, bit holderand 36 different bits.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0403 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT474-7Circlip pliers straight internl . . . . . . . . . . . . . . . . . . . . . . mm 12-65Circlip pliers bent internal . . . . . . . . . . . . . . . . . . . . . . . . mm 12-65Circlip pliers straight external . . . . . . . . . . . . . . . . . . . . mm 12-65Circlip pliers bent external . . . . . . . . . . . . . . . . . . . . . . . mm 12-65Length of pliers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 175Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11270 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTX474-9 Circlip pliers straight int. clips. . . . . . mm 32-80Circlip pliers bent int. clips . . . . . . . . mm 32-80Circlip pliers straight ext. clips . . . . . mm 32-80Circlip pliers bent ext. clips . . . . . . . . mm 32-80Length of pliers. . . . . . . . . . . . . . . . . . mm 225Case size LxWxH. . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 12250 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TTSD39Torque screwdriver 1⁄4″-g for . . . . . . . . Nm 1-5Extension bar 1⁄4″- ❒ . . . . . . . . . . . . . . . mm 100Bits for slotted heads . . . . . . . . . . . . . . . mm 0.5x3 0.6x4.5 0.8x5.5 1.2x6.5Bits for Phillips heads . . . . . . . . . . . . . . No 0 1 2 3Bits for Pozidriv-heads . . . . . . . . . . . . . No 0 1 2 3Bits for TX-heads . . . . . . . . . . . . . . . . . . TX 8 9 10 15 20

25 27 30 40Bits for TX-heads . . . . . . . . . . . . . . . . . . TPX 10 15 20 30 40Bits for Robertson heads. . . . . . . . . . . . No 0 1 2 3Bits for Grabber heads PH . . . . . . . . . . No 2 (2)Bits for hex holes . . . . . . . . . . . . . . . . . . mm 2 3 4 5 6Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.66

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 10623 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . No TTPSPGContents:Welding grip 406, length . . . . . . . . . mm 250Welding grip 407, length . . . . . . . . . mm 225Universal pliers 408, length . . . . . . mm 200Universal pliers 404, length . . . . . . mm 160Case size LxWxH . . . . . . . . . . . . . . . mm 560x265x40Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 2.32

No 12250

No 10623

No 11270

No 0403

Tool Storage

Teng Tools

33


Tool TraysTorque ToolsTeng Tools. With ratchet - by which the torque wrench can beused for both full tightening, and the final check of the tighteningtorque. Reversible with lever, but only right-hand action fortorque checking. Equipped with angle gauge for post tightening.Graduated in Nm and lbs-foot. Lockable setting. Accuracy ±4%. Satin finish for the torque setting to be easier to read.Degree scale for post tightening of cylinder heads, etc.Supplied in plastic case with space for sockets.Fits in Teng Tools tool boxes and tool trolleys.and

Teng Tools. Set containing one torque multiplier and one tor-que wrench. The torque multiplier’s input tightening torque istrebled on the output drive. The torque wrench has a 1⁄2″ ❒-driveand torque range 40-210 Nm.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Teng Tools. Set consisting of torque wrench, 10 crow footspanners, bit socket, 8 TX-bits and extension bars 75 and 125mm.Individual calibration certificate enclosed.Supplied in TC tray suitable for Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . . . . . . . 7319 -0100Teng Tools . . . . . . . . . . . . . . . . No TTX1292For tightening torque . . . . . . . . Nm 40-210For tightening torque . . . . . . . . lbf-foot 30-150Drive dimension ❒ . . . . . . . . . . inch 1⁄2Length . . . . . . . . . . . . . . . . . . . . mm 465Case size LxWxH. . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . kg 1.65

Art. no. . . . . . . . . . . . . . . . . . . . . . 12822 -0100Teng Tools . . . . . . . . . . . . . . . . . . No TTXMP12Torque multiplier:Max. tightening torque . . . . . . . . Nm 1400Torque wrench:Torque range ISO . . . . . . . . . . . . Nm 40-210Torque range Imperial . . . . . . . . lbf.ft 30-160Insert size LxWxH . . . . . . . . . . . . mm 560x110x60Weight . . . . . . . . . . . . . . . . . . . . . kg 4.0

Art. no. . . . . . . . . . . . . . . 10211 -0104Teng Tools . . . . . . . . . . . No TTX3892Drive size❒ . . . . . . . . . . . inch

Torque range ISO . . . . . Nm 20-110Torque range Imperial . . lbf.ft 15-75Length of torque wrench mm 365Crow foot spanners . . . . mm 10 11 12 13 14

15 16 17 18 19Bits for TX heads . . . . . . TX 8 10 15 20 25 27 30 40Case size LxWxH. . . . . . mm 560x110x60Weight . . . . . . . . . . . . . . . kg 0.9

Repair set . . . . . . . . . . . . 7319 -1207Pack. . . . . . . . . . . . . . . . . qty 10

No 7319

No 12822

No 10211

Tool Storage

Teng

Too

ls

34


Tool TraysTorque Tools

Teng Tools. Set of 4 torque wrenches with preset torque. Manufactured according to ISO6789. Accuracy ±4%. Matt chromium plated. Rubber handle. Separate wall rack supplied. Supplied in PS insert case with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Impact ToolsTeng Tools. 24 piece impact socket set. Contains 5 1⁄4″ short sockets, 9 short sockets 3⁄8″, 9long sockets 3⁄8″ and one adaptor 3⁄8″-1⁄4″.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of twelve 1⁄2″ impact bits for internal TX heads.Supplied in a plastic TC tray with removable cover that fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set with 15 hex impact socket bits.Supplied in a plastic TC tray with removeable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 12813 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . No TT9212TXNo. of socket bits . . . . . . . . . . . . . . . . ea. 12TX-size. . . . . . . . . . . . . . . . . . . . . . . . . TX- 10 15 20 25 27 30

40 45 50 55 60 70Case size LxWxH. . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.9

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14386 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTPSTQ04Quantity torque wrenches . . . . . . . . . . . . . . . . ea 4Drive❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch

Adjustable torque . . . . . . . . . . . . . . . . . . . . . . . Nm 90, 110, 120, 140Torque wrench length . . . . . . . . . . . . . . . . . . . mm 513Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . mm 570x262x73Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 5.8

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13247 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No TT9024Regular sockets, 1⁄4″ ❒-drive . . . . . . . . . . mm 6 7 8 10 13Regular sockets, 3⁄8″ ❒-fdrive . . . . . . . . . . mm 8 10 11 12 13 14 16 17 19Deep sockets, 3⁄8″ ❒-drive. . . . . . . . . . . . . mm 8 10 11 12 13 14 16 17 19Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8-1⁄4Case size LxWxH. . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.07

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15141 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. TT9015HXSocket bits with 3⁄8″ ❒-drive, size . . . . . . . . . mm 4, 5, 6, 7, 8, 10, 12Socket bits with 1⁄2″ ❒-drive, size . . . . . . . . . mm 5, 6, 8, 10, 12, 14, 17, 19Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.492

No 12813

No 15141

No 13247

No 14386

Tool Storage

Teng Tools

35


Tool TraysImpact ToolsTeng Tools. 7 piece set with impact socket tools. Contains three extension bars, universaljoint, 2 adaptor drives for enlargement and one for reduction.PARASupplied in a plastic TCtray with removable cover. The cases fit in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set containing 16 1/2″ drive impact sockets - regular and deep.Supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools tool boxesand tool trolleys.

Teng Tools. Set containing 16 impact sockets - short and long and 2 locking pins and 2O-rings.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containing 1⁄2″ impact driver, bit socket, adaptor g5⁄16″-3⁄8 ″❒ as well as 17bits.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13246 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT9207Extension bars, length . . . . . . . . . . . . . . . . . . . . mm 75,125, 250Universal joint. . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Adaptor drives . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2-3⁄4, 3⁄8-1⁄2Adaptor drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2-3⁄8Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.05

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6880 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT9116Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Socket sizes. short sockets . . . . . . . . . . . . . . . . . . . . . mm 13 15 16 17

18 19 22 24Socket sizes. deep sockets . . . . . . . . . . . . . . . . . . . . . mm 13 15 16 17

18 19 22 24Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.2

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10210 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No TTID20For bits with drive . . . . . . . . . . . . . . . . . . . g inch 5⁄16

Bits for slotted heads . . . . . . . . . . . . . . . . mm 1.4x6 1.4x8 2.2x10 1.8x12Bits for Phillips heads . . . . . . . . . . . . . . . . No 1 2 3 4Bits for int. hex holes . . . . . . . . . . . . . . . . mm 4 5 6 8Bits for TX heads. . . . . . . . . . . . . . . . . . . . TX- 30 40 45 50 55Case size LxWxH . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Spare adaptor 3⁄8″ ❒ - 5⁄16″g . . . . . . . . . 10210 -0203Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14384 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT9120DConnection bracket❒ . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Socket sizes. short sockets. . . . . . . . . . . . . . . . . . mm 13, 15, 16, 17,

18, 19, 22, 24Socket sizes. long sockets . . . . . . . . . . . . . . . . . . mm 13, 15, 16, 17,

18, 19, 22, 24Locking pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 20x3.5, 25x3.5O-rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3x20, 3x24Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.2

No 10210

No 14384

No 6880

No 13246

Tool Storage

Teng

Too

ls

36


Tool TraysImpact ToolsTeng Tools. Set of 3⁄4″ impact sockets - 8 regular and 7 deep asper DIN-standard.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Insulated ToolsTeng Tools. Set of 4 insulated pliers. Manufactured according to the standard EN 60900 forwork under voltage up to 1000 volt (by qualified electricians). Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Teng Tools. Set including 7 insulated screwdrivers (with slotted heads, Phillips and Pozid-riv/Supadriv heads) manufactured according to the standard EN 60900 for work undervoltage up to 1000 volt (by special electricians).Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11750 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTV907Contents:Screwdriver MDV820 . . . . . . . . . . . . . . . . . . . . . . . mm 0.4×2.5×75Screwdriver MDV824 . . . . . . . . . . . . . . . . . . . . . . . mm 0.8x4.0x100Screwdriver MDV826 . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5x125Screwdriver MDV840 PH . . . . . . . . . . . . . . . . . . . . No 0-60Screwdriver MDV842 PH . . . . . . . . . . . . . . . . . . . . No 1-80Screwdriver MDV844 PH . . . . . . . . . . . . . . . . . . . . No 2-100Screwdriver MDV864 PZ . . . . . . . . . . . . . . . . . . . . No 2-100Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.65

Art. no.. . . . . . . . . . . . . . . . . . . 12208 -0104Teng Tools. . . . . . . . . . . . . . . . No TTX9415Drive . . . . . . . . . . . . . . . . . . . . . inch 3⁄4Short sockets, size . . . . . . . . . mm 19 24 27 28

30 32 34 36Deep sockets, size . . . . . . . . . mm 19 24 27 30

32 33 36Case size LxWxH . . . . . . . . . . mm 560x110x60Weight . . . . . . . . . . . . . . . . . . . kg 9.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11749 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTV440Contents:Side cutters MBV441-6, length . . . . . . . . . . . . . . . . . . . . . . mm 150Combination pliers MBV451-7, length . . . . . . . . . . . . . . . . mm 175Flat nose pliers MBV461-8, length. . . . . . . . . . . . . . . . . . . . mm 200Stripping pliers MBV499-7, length . . . . . . . . . . . . . . . . . . . . mm 175Case size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

No 11749

No 12208

No 11750

Tool Storage

Teng Tools

37


Tool TraysService ToolsTeng Tools. Set of 4 parts including a gasket scrape, two hooks and a piercer.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Special designed jaws prevents internal hose linings from destruction. Light-weight easy to handle and non conductive safety. 3 sizes that fit most hose sizes.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Five piece set consisting of three wheel nut sock-ets for domed cap nuts, tyre balancing weight pliers and a 1⁄2″torque wrench.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Teng Tools. Set of 7 specialist sockets for applications in cars (oxygen sensor socket,injector socket, vaccum switch socket, oil sender socket, heated oxygen socket and offsetoxygen sensor wrench).Supplied in a plastic TC tray with removeable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Tool set of 5 pieces for body work. Two polyuret-hane hammers and three different dressing hammers.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12249 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTXW05Wheel nut sockets 1⁄2″-drive . . . . . . . . . mm 17 19 21Tyre balancing weight pliers, length. . . mm 245Torque wrench 1⁄2″-drive . . . . . . . . . . . . Nm 40-210Case size LxWxH . . . . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11769 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTSR04Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.43

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11842 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTHC03Number of clamps . . . . . . . . . . . . . . . 3For hose diameter . . . . . . . . . . . . . . . inch 1⁄4-3⁄4, 1⁄4-11⁄4, 3⁄4-21⁄4Case size LxWxH . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.49

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12244 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTPSADPolyurethane hammer, head diameter . . mm 35, 55Dressing hammer with straight pen . . . . . g 325Dressing hammer with crowned face. . . . g 325Dressing hammer med round + sq. faces g 325Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 570x262x56Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.76

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 14434 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTSS07Number of sockets. . . . . . . . . . . . . . . qty 7Teng Tools socket number. . . . . . . . AT350, AT355, AT360, AT365,

AT370, AT375, AT380Case size LxWxH. . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.5

No 14434

No 11842

No 12244

No 11769

No 12249

Tool Storage

Teng

Too

ls

38


Tool TraysService ToolsTeng Tools. Set consists of a crimping tool with three exchangeable heads for insulatedand non insulated terminals and a 2.5 mm hex key.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set consisting of a threelegged combination puller with an extra yoke forswitching to twolegged pulling. With reversible legs for internal and external grip. Manufac-tured of chrome vanadium steel.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Teng Tools. Set consisting of 6 double ended drain plug sockets, 2, 6-point spark plugsockets, 1 oil filter wrench, 2 extension bars 75 and 250mm long, adaptor drive 1⁄2″-3⁄8″, 3⁄8″drive socket 21mm, telescopic inspection mirror with magnet and a set of feeler gauges.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 3 prybars. Round, ground point at one end -flat hook shaped prybar at the other.Supplied in TTX tray suitable for Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 3 roll bars. Equipped with through blade,striking head and ergonomically designed plastic handle.Fits in Teng Tools tool boxes and tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0396 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTOS16No. of pieces. . . . . . . . . . . . . . . . . . . . . . . 16Size of drain plug sockets. . . . . . . . . . . . g 5⁄16x3⁄8g, ❒ 11x12 g,

g 17x1⁄2g, ❒ 8x3⁄8 ❒❒13x14 g, g 8x10 g

Spark plug sockets 3⁄8″ . . . . . . . . . . . . . . mm 16, 21Extension bars3⁄8″ , length . . . . . . . . . . . mm 75, 250Feeler gauge (21 blades) . . . . . . . . . . . . mm 0.05-1.00Case size LxWxH. . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.8

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12247 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTCP04Head for insulated terminals . . . . . . . . . . . . . . . . . . . . . . mm2 0.324-5.261Head for non insulated terminals . . . . . . . . . . . . . . . . . . mm2 0.324-3.31Head for insulated terminals . . . . . . . . . . . . . . . . . . . . . . mm2 0.3-8Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0398 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT804Clamping width . . . . . . . . . . . . . . . . . . . . . . . mm 130Clamping depth . . . . . . . . . . . . . . . . . . . . . . . mm 100Case size LxWxH . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.2

Art. no. . . . . . . . . . . . . 11786 -0106Teng Tools . . . . . . . . . No TTXPB3ALengths . . . . . . . . . . . . mm 300 450 550Case size . . . . . . . . . . mm 560x110x74Weight . . . . . . . . . . . . . kg 1.8

Art. no.. . . . . . . . . . . . . . . . . . 10069 -0106Teng Tools. . . . . . . . . . . . . . . No TTXPB3Lengths . . . . . . . . . . . . . . . . . mm 300 400 500Case size LxWxH . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . kg 1.75

No 10069

No 0398

No 11786

No 12247

No 0396

Tool Storage

Teng Tools

39


Tool TraysService ToolsTeng Tools. Set consisting of crimping tool CP50 with slots for crimping red, blue andyellow terminals and cutters for bolts and wire. Also included in the assortment are 120terminals of varying types coloured red and blue.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containing flexible and telescopic pick ups, magnifyling glass, inspectionmirror, flexible claw pick up, LED flash light and batteries.Supplied in plastic TC tray with removeable cover. Fit in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 11 pieces containing 5 screw extractors, 4 stud bolt extractors as well as2 nut splitters.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. 17 piece set containing one tap and one die of each dimension as well as a tapwrench one diestock and a screw pitch gauge.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.Spare dies see 11683.

Teng Tools. Containing three telescopic tools - an inspection mirror, magnifying glass andmagnet. All with pocket clip.Supplied in a plastic insert case with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14437 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTM08Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11038 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTCP121Contains: crimping tool . . . . . . . . . . . . . . . . . . . . . . . quantity 1

terminals assorted . . . . . . . . . . . . . . . . . . quantity 120Insert size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6934 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTSN11Contents:Screw extractor . . . . . . . . . . . . . . . . . . . . inch 5⁄64 7⁄64 5⁄32 1⁄4 19⁄64

Stud bolt extractor . . . . . . . . . . . . . . . . . . mm 6 8 10 12Nut splitter. . . . . . . . . . . . . . . . . . . . . . . . . mm 5-20 14-27Case size LxWxH. . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.3

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10946 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTM03Diameter of mirror/magnifying glass . . . . . . . . . . . . . . . . . mm 55Extendable length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 590Diameter of magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 12Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 6919 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . No TTTD17Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 3 M 4 M 5 M 6

M 8 M 10 M 12Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8

No 6919

No 6934

No 10946

No 11038

No 14437

Tool Storage

Teng

Too

ls

40


Tool TraysService ToolsTeng Tools. Set containing one rivet gun with four nose bushes as well as 80 assortedrivets (20 each of 2.4, 3.2, 4.0 and 4.8 mm).Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 28 drills 1.0-13.0 mm. Helix pitch 28°. Point angle 118°. Centre point forimproved position accuracy. HSS. Polished. Ground. Standard drills for drilling steel andcast iron. DIN 338.Contains:3 each of 1.0 and 1.5 mm.2 each of 2.0 and 2.5 mm.1 each of 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 10, 11, 12, 13 mm. Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set for Blind nuts M 3, M 4, M 5 and M 6 as well as 20 Blind nuts of each size.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 12 different needle files - flat, half round, three square, square, round,warding, knife, barette, hand, oval, spring and double half round shape. Fine. Supplied in plastic insert tray. Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set of 5 handled medium heavy 10″ hand files -flat, hand file, half round, round and three square file.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Teng Tools. Pipe/flange tool set containing 10 parts for copper brass and thin walledaluminium pipe. The pipe cutter cuts pipe up to 32 mm. The flange tool draws up pipe ends to45° on pipe diameters 4-14 mm.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15144 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTDB28Drill bit diameter (28 pc) . . . . . . . . . . . . . . . . . . . . mm 1.0-13.0Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.624

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12843 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTNF12No of needle files. . . . . . . . . . . . . . . . . . . . . ea. 12Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 163Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.47

Art. no.. . . . . . . . . . . . . . . . . . 12844 -0104Teng Tools. . . . . . . . . . . . . . . No TTXF05No. of files . . . . . . . . . . . . . . . ea. 5File length . . . . . . . . . . . . . . . mm 250Case size LxWxH . . . . . . . . . mm 560x110x74Weight . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14404 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTF10Contents:Pipe cutter, Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3-32Flanging tool, 2 parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8 10Flange adapters for pipe diameters . . . . . . . . . . . . . . . . . mm 4, 4.75, 6, 8,

10, 12, 14Insert size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.7

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10619 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTNR81With nose bush for POP-nut. . . . . . . . . . . . . . . thread M 3, M 4, M 5, M 6Rivet sizes (20 of each). . . . . . . . . . . . . . . . . . . thread M 3, M 4, M 5, M 6Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6921 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No TTHR81With nose bushes. . . . . . . . . . . . . . . . . . . . mm 2.4 3.2 4.0 4.8Quantity rivets. . . . . . . . . . . . . . . . . . . . . . . 80Length of gun . . . . . . . . . . . . . . . . . . . . . . . mm 250Case size LxWxH. . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.95

No 14404

No 10619

No 12844

No 6921

No 12843

No 15144

Tool Storage

Teng Tools

41


Tool TraysService ToolsTeng Tools. Combined set containing 9 pieces - 6 parallel pin punches, 2 cold chisels and acentre punch.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Limit. Set of 5 pieces containing: mechanical vernier calipers 150 mm 2670-0302, micro-meter 0-25 mm 9538-0101, angle 150x100 mm 2533-1158, steel rule 150 mm 8427-0107,scriber 150 mm with hard metal tip 2474-0102.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containing a cordless drilling machine and a cordlesspower driver incl. quick charger and an extra battery 14.4 V.Supplied in special plastic box which fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containging an impact wrench with 1⁄2″ squaredrive. Incl. fast charger and a spare 19.2 V battery..Supplied in PS tool tray to fit in Teng Tools tool boxes and rollercabinets.

Limit. Measurement set in 3 pieces intended for car mechanics, service technicians, etc.To measure brake drums, tyre pressure and tread depth.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Limit Measuring Kits

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12864 -0109Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6922 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTPC09Contents:Punches, tip diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 7 8Cold chisels, width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 19 25Centre punch, point diameter . . . . . . . . . . . . . . . . . . . . mm 5Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.4

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 15171 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . NoNo master TTPSDSDrilling machine:Battery voltage/capacity . . . . . . . . . 14.4 V/3.0 AhSpeed unloaded. . . . . . . . . . . . . . . . rpm H 0-1000/ L 0-350Max. torque . . . . . . . . . . . . . . . . . . . Nm / ln-lb 8.2-12.8 / 72.5-113Chuck capacity . . . . . . . . . . . . . . . . mm 13.0Power driver:Battery voltage/capacity . . . . . . . . . 14.4 V/3.0 AhSpeed unloaded. . . . . . . . . . . . . . . . rpm 0-2400Max. torque . . . . . . . . . . . . . . . . . . . Nm / ln-lb 120 / 1062Bit attachment . . . . . . . . . . . . . . . . . inch 1⁄4gInsert size . . . . . . . . . . . . . . . . . . . . . mm 580x274x95Box weight . . . . . . . . . . . . . . . . . . . . kg 5.77Pack. . . . . . . . . . . . . . . . . . . . . . . . . . sts 2

Extra batteri pack. 3.0 Ah Li-ion 15155 -1009Teng Tools . . . . . . . . . . . . . . . . . . . . Nr PRDS-BAT

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13956 -0106Digital brake disc vernier calipers. . . . . . . . . . . . . . . . . . mm 0-75Tyre pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg/cm2 7Tread depth gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 0-25Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50

art. no. . . . . . . . . . . . . . . . . . . . . . . . 15172 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . No TTPSIWSquare drive. . . . . . . . . . . . . . . . . . . inch 1⁄2Battery voltage / capacity . . . . . . . . 19.2 V / 3.0 AhNo load speed . . . . . . . . . . . . . . . . . rpm 0-2000Max. torque . . . . . . . . . . . . . . . . . . . Nm /In-lb 300 / 2655Size of case . . . . . . . . . . . . . . . . . . . mm 580x274x95Weight of case . . . . . . . . . . . . . . . . . kg 5.15Pack. . . . . . . . . . . . . . . . . . . . . . . . . . sts 2

Extra batteri pack. 3-0 Ah Bl-Mh 15157 -1007Teng Tools . . . . . . . . . . . . . . . . . . . . Nr PRIW-BAT

Nr 15172

No 15171

No 13956

No 6922

No 12864

Tool Storage

Teng

Too

ls

42


Tool TraysLimit Measuring Kits

Limit. Set of 5 pieces containing digital vernier calipers 150 mm 2928-0104, micrometer0-25 mm 9538-0101, square 150x100 mm 2533-1158, steel rule 150 mm 8427-0107, scriber150 mm with HM-tip 2474-0102.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Limit. 12 pcs measuring set. For measuring, troubleshooting and control. A basicassortment for vehicle mechanical, repair and service etc.Fit in Teng Tools tool boxes and tool trolleys.

Limit. Set of 20 pieces. Includes digital sliding caliper, depth measurement stop,micrometer, telescopic measurement stop (6 parts), flat square, base square,protractor, indicator gauge, magnetic indicator stand, hole gauge (2), threadgauge, feeler gauges, steel rule, scriber and compasses.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxesand tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . 11861 -0104 -0203System of units. . . . . . . . . . . metric InchCase size . . . . . . . . . . . . . . . mm 265x142x50 265x142x50

Code no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13958 -0104IR Thermometer, measuring range . . . . . . . . . . . . . . . °C -20 - +500Didgital caliper, measuring range . . . . . . . . . . . . . . . . mm 0-150Digital brake disc caliper, measuring range . . . . . . . . mm 0-75Tyre pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . kg/cm2 7Tyre tread depth gauge. . . . . . . . . . . . . . . . . . . . . . . . . mm 0-25Micrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 0-25Dial gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10Magnetic stand, max. height . . . . . . . . . . . . . . . . . . . . mm 280Steel rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 300Feeler gauge, 13 blades . . . . . . . . . . . . . . . . . . . . . . . . mm 0.05-1.00Thread pitch gauge 60° . . . . . . . . . . . . . . . . . . . . . . . . . Metrisc/UNCMultimeter:Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 1000 VVoltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 750 VCurrent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 10 AResistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ΩDwell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Enging tach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuity test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -Diode test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -Size of box LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 560x265x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.9

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12861 -0102Digital sliding caliper . . . . . . . . . . . . . . . . . mm 150Depth measurement stop, length . . . . . . mm 75Micrometer . . . . . . . . . . . . . . . . . . . . . . . . . mm 0-25Telescopic measurement set (6) . . . . . . . mm 8-150Flat square . . . . . . . . . . . . . . . . . . . . . . . . . mm 150Protractor . . . . . . . . . . . . . . . . . . . . . . . . . . mm 120Dial indicator. . . . . . . . . . . . . . . . . . . . . . . . mm 10/0.01Indicator stand, max. height. . . . . . . . . . . mm 280Hole size gauge . . . . . . . . . . . . . . . . . . . . . mm 0.45-1.5 1.5-3.0Thread gauge M/UNC. . . . . . . . . . . . . . . . No. of blades 55Feeler gauges 13 blades . . . . . . . . . . . . . mm 0.05-1.0Steel rule. . . . . . . . . . . . . . . . . . . . . . . . . . . mm 300Scriber HM, length. . . . . . . . . . . . . . . . . . . mm 150Callipers . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 200Case size LxWxH . . . . . . . . . . . . . . . . . . . mm 560x265x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 5.6

No 11861

No 13958

No 12861

Tool Storage

Teng Tools

43


Tool storage ancillariesAluminium clip rail systemTeng Tools. An aluminium section for mounting on the wall which is supplemen-ted with clips for 1⁄4″, 3⁄8″ or 1⁄2″ sockets.

Teng Tools. Special top for use with tool trolleys. - Designed with 7 small compartments forsmall components. The mat protects the trolley’s finish from being damaged.

Teng Tools. Rubber mat for placing in tool boxes, on a tool trolley’s worktop or in toolbox drawers, etc. Resistant to oil and grease. Cut to requiredformat.

Non slip tool mats

Magnet tool railTeng Tools. Magnetic strip that secures magnetic tool such as screw-drivers, spanners etc.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11254 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . No ABS-TOPSize . . . . . . . . . . . . . . . . . . . . . . . . . . mm 670x460

Art. no. . . . . . . . . . . . . . . . . . 6246 -0100Teng Tools . . . . . . . . . . . . . . No TC-MATSize LxWxT . . . . . . . . . . . . . mm 2000x450x2Pack. . . . . . . . . . . . . . . . . . . . qty 6

Art. no. . . . . . . . . . . . . . . . . . . . 0345 -0202Teng Tools . . . . . . . . . . . . . . . . No TC-MAGSize . . . . . . . . . . . . . . . . . . . . . . mm 457x52Pack. . . . . . . . . . . . . . . . . . . . . . qty 12

Aluminium section . . . . . . . . . . . . . . . 2893 -0105Length. . . . . . . . . . . . . . . . . . . . . . . . . . . mm 430Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 30

Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2893 -0204 -0303 -0402For sockets with. ❒-drive . . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2No. of holders per . . . . . . . . . . . . . . . . . pack. 10 10 10

Aluminium section . . . . . . . . . 2893 -0154 -0170Teng Tools . . . . . . . . . . . . . . . . . No ALU 1000-1 ALU1000-4Length . . . . . . . . . . . . . . . . . . . . . m 1 1No. per pack. . . . . . . . . . . . . . . . ea. 1 4

No 0345/Magnetic strip

4-row aluminium sections with socket clips and 2 handles 2905 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No ALU450Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 450Socket-clips (10 of each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4, 3⁄8, 1⁄2

No 6246

No 11254

No 2893 (Illustrated with clips)

Tool Storage

Teng

Too

ls

44


Tool storage ancillariesRoller cabinet side plate system

Teng Tools. Tool panel suitable for mounting on the side of Teng Tools tool trolleys. Canalso be used freestanding, the panel is equipped with support feet and carrying handle.

Roller cabinet ancillaries

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6994 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW-SPWidth x height. . . . . . . . . . . . . . . . . . . . . . . . mm 460x640

No 14401-0105

No 6994

No 14401-0204

Hook types

No 14401-0303

Teng Tools. Nylon cover suitable for Teng Tools top drawers, Mega Master tool sets and tool trolleys.

Hooksets for ditto

Art. no. . . . . . . . . . . . . . 14401 -0105 -0204 -0303Teng Tools . . . . . . . . . . No TC-Cover TC-Cover1 TC-WC02Fits . . . . . . . . . . . . . . . . . top drawers TCMM1001N set tool trolleys

Artnr. . . . . . . . . . . . . . . . . . 6994 -0203 -0252 -0278Teng Tools. . . . . . . . . . . . . TCW- HK10 HK02 HK20Hooks, quantity x type . . . 3x45°, 7x90° 10 double hooks 4x45° single, 4x45° double

4x90° single, 4 small spring clips,4 large spring clips

Artnr. . . . . . . . . . . . . . . . . . 6994 -0302 -0401 -0500Teng Tools. . . . . . . . . . . . . TCW- HK45 HK 90 HK-AIRHooks, quantity x type . . . 10x45° 10x90° 10 for pneumatic tools

Artnr. . . . . . . . . . . . . . . . . . 6994 -0609 -0708Teng Tools. . . . . . . . . . . . . TCW- HKB HKSHooks, quantity x type . . . 10 large spring clips 10 large spring clips

Tool Storage

Teng Tools

45


Teng Tools. Side table and paper holder for attaching to the side of a Teng Tools tooltrolley.

Teng Tools. Shelf with magnets for placement on the side of the tool trolley. Can also beattached to a tool panel.

Teng Tools. Lockable side cabinet. For mounting on the side of the tool trolley. Mountingfittings and a shelf included.

Teng Tools. Retaining strap that holds a top drawer fixed to a tool trolley, to prevent thedrawer from tipping when moving between two workplaces.

Teng Tools. Retaining strap that holds a middle drawer fixed to a tool trolley, to prevent thedrawer from tipping when moving between two workplaces.

Roller cabinet ancillariesTool storage ancillaries

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 11754 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TCF01

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 11755 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TCF02

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11756 -0102Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCA01Table size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 370x370Max. paper roll width . . . . . . . . . . . . . . . . . . . . . . . . mm 360

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11255 -0108Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW-CABOutside measurements . . . . . . . . . . . . . . . . . . . mm 400x200x500Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 6.5

Art. no.. . . . . . . . . . . . . 11788 -0104 -0203Teng Tools. . . . . . . . . . No 580C 580DShelf size . . . . . . . . . . . mm 310x115x31 210x115x31

No 11756

No 11788

No 11255

No 11755

No 11754

Tool Storage

Teng

Too

ls

46


Tool storage ancillariesRoller cabinet ancillariesTeng Tools. Set of 4 black castors with needle bearings and securing base. 2 fixed and 2swivel with 2-stage brake. Suitable for Teng Tools tool trolleys.

Teng Tools. Wood plate for roller cabinets TCW806LN and TCW809N.

Teng Tools. Bumpers for tool trolleys. Fitted to prevent paint and body damage whenmoving the trolley.

Teng Tools. Four black dividers for extending drawers in the middle and top drawers.

Teng Tools. Handle with rubber grip for improved comfort when moving Teng Tools’ tooltrolleys.

Teng Tools. Four black dividers for extending drawers in tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . 15136 -0104Teng Tools . . . . . . . . . . . . . . . . . No TC-TB01Size . . . . . . . . . . . . . . . . . . . . . . . mm 1342x450x37

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12222 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No TCBP

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 12225 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . No TCDIVLSize (2) . . . . . . . . . . . . . . . . . . . . . . . mm 570x40x3Size (2) . . . . . . . . . . . . . . . . . . . . . . . mm 375x40x3

Art. no. . . . . . . . . . . . . . . . . . . . . . . 12220 -0108Teng Tools . . . . . . . . . . . . . . . . . . . No TCRFHSize . . . . . . . . . . . . . . . . . . . . . . . . . mm 440x80x90

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 12224 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . No TCDIVSSize (2) . . . . . . . . . . . . . . . . . . . . . . . mm 570x40x3Size (2) . . . . . . . . . . . . . . . . . . . . . . . mm 270x40x3

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12223 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCNBCCastor diameter x castor width . . . . . . . . . . . . . . . . . . . . . . . mm 125x50Max. load per castor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 170Max. load per 4 castors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 500

No 12220

Nr 15136

No 12222

No 12225

No 12224

No 12223

Tool Storage

Teng Tools

47


Tool storage ancillariesAccessories for roller cabinets and tool boxes

Teng Tools. Side handle with rubber grip for Teng Tools top and middle boxes. Sold inpairs.

Having 3 or more different keys can be a real nuisance when opening or locking a stacksystem of tool boxes, but at the same time security is important and so each box has alwaysbeen supplied with it’s own set of keys.

Now Teng Tools can offer a set of five replacement locks with just one pair of keys to fit all thelocks. Each set (stock number TC-LOCK5) contains 2 regular locks and 3 locks with barfittings to replace the lock originally supplied as follows.

One key fit all

Teng Tools. Lock set of 3 locks with 1 set of spanners. Suitable for tool sets TCMM1001Nand TCMM715N.

Teng Tools. A set of 5 locks, but only one key (plus spare key). Practicalfor those with a storage set consisting of a tool trolley, middle box and topbox and who only want one key all the locks. Contains 3 standard locks, 2locks with rail as well as a key for converting for all standard trolleys andboxes.

Tool Box Page Description Regular lock Bar type lock

TC706F 14 6 drawertop box 1TC703 14 3 drawer middle boxTCW707 14 7 drawer roller cabinet 1

TC805NFX 12 3 drawer middle boxTC806NF 11 6 drawer drawer top box 1TC803N 12 3 drawer ddle box 1TCW803N 12 3 drawer roller cabinet 1TCW806N 12 6 drawer roller cabinet 1TCW807N 13 7 drawer roller cabinet 1TCW808N 13 8 drawer roller cabinet 1TCW810N 13 10 drawer roller cabinet 1TCW813N 13 13 drawer roller cabinet 1

TCW-CAB 39 Side cupboard 1

Art. no. . . . . . . . . . . . . . . . . 11023 -0109Teng Tools . . . . . . . . . . . . . No TC-LOCK5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14406 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC-LOCK3

Key blank, 3-pack. . . . . . . . . . . . . . . . . . . . . . 14406 -1009Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TC-BKEY

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . 12221 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . . No TCDSH

No 14406

No 11023

No 12221

Tool Storage

Teng

Too

ls

48


Work benches and accessories

Teng Tools work benches feature fully adjustable legs that give a height adjustmentrange of between 745mm and 960mm. The TWB-4WD set of wheels gives the addedflexibility of adding a set of 4″ wheels to the work bench.

Teng Tools. Work bench with sturdy laminated board - granite patternedwork surface and black edges. Working height adjustable using theadjustable legs.

Especially developed for use where an industrial quality is required the range of Teng Tools work benches has been designed tocombine traditional metal work benches with the Teng Tools range of roller cabinets and tool boxes giving all the added benefitsof using the TC tray system with high quality work stations.

Tested for a 500 kilogram loading capacity and a choice of 1.5 or 2 meter double high density board laminated work surfaces plusa selection of panels, drawers and accessories as well as features such as adjustable legs this range gives the flexibility todesign work benches to suit almost any workshop requirements.

A range of accessories is shown on the following pages but many more are available to special order (storage bins, lightingsystems, shelves, hooks, etc) – please contact your local Teng Tools distributor with any requirements that you may have.

Art. no. . . . . . . . . . . . . . . . . . . . . . 11257 -0106 -0205Teng Tools . . . . . . . . . . . . . . . . . . No TWB1500 TWB2000Length . . . . . . . . . . . . . . . . . . . . . . mm 1500 2000Width . . . . . . . . . . . . . . . . . . . . . . . mm 800 800Adjustable working height. . . . . . mm 707-927 707-927Weight . . . . . . . . . . . . . . . . . . . . . . kg 61.1 73.4No 11257

Tool Storage

Teng Tools

49



Teng Tools. Perforated tool panels complete with mounting rails. Fit onworkbenches TWB 1500-2000.Suitable hook sets 6994 see page 0000.

Teng Tools. Set of 4 swivel castors with brakes for use with 1⁄2″ bolt.Makes the workbenches easy to move.

Teng Tools. Trestle legs with adjustable working height. Suitable for work tops 1500-2000 mm.

Teng Tools. Mounting rails for tool panel TWB-PA. For placement onworkbenches TWB1500-2000.

Teng Tools. Extra work tops for workbenches. Sturdy laminated highdensity fibre board with granite patterned surface, black edges.

Teng Tools. Perforated tool panel. Fitted using mounting rails TWB-UPR on the workbench.Suitable tool hooks 6994 page 0000.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 11262 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . No TWB-4WDWheel diameter . . . . . . . . . . . . . . . . . . mm 100Max. load per castor . . . . . . . . . . . . . . kg 80Max. load - 4 castors. . . . . . . . . . . . . . kg 250

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11261 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No TWB-LEGAdjustable working height. . . . . . . . . . . . . mm 707-927

Art. no. . . . . . . . . . . . . . . . . . . . . . 11260 -0101Teng Tools . . . . . . . . . . . . . . . . . . No TWB-PAWidth x height. . . . . . . . . . . . . . . . mm 895x483

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11259 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TWB-UPRTotal length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1445The rail’s height above the table top (fitted). . . . . mm 1000

Art. no. . . . . . . . . 11263 -0108 -0207Teng Tools . . . . . No TWB-15TOP TWB-20TOPDimensions. . . . . mm 1500x800x37 2000x800x37Weight . . . . . . . . . kg 33 44

Art. no. . . . . . . . . . . . . . . . . . 11258 -0105 -0204Teng Tools . . . . . . . . . . . . . . No TWB-1500A TWB-2000ANo. of panels . . . . . . . . . . . . 2 4Size of tool panels. . . . . . . . mm 895x483 895x483No. of mounting rails. . . . . . 2 3Fits workbench lenght. . . . . mm 1500 2000

No 11263

No 11262

No 11261

No 11260

No 11259

No 11258

Illustration shows tool panels mounted on the workbench

Tool Storage

Teng

Too

ls

50



Teng Tools. Brackets for securing a 3-drawer tool box (TC703, TC803N,TC803NS) under the work top on a workbench. Mounting screws suppli-ed.

Teng Tools. Set of 2 swivel castors with mounting plate. Suitable for Teng Tools 3, 5 and6-drawer tool trolleys. Intended to replace the tool trolley’s 2 fixed castors when the trolleyneeds to be easily moved, e.g. under a workbench.

1.5 and 5 meter options

Art. no. . . . . . . . . . . . . . . . . 11265 -0106Teng Tools . . . . . . . . . . . . . No TC703-BR

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11266 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TCW-SWWheel diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 100Max. load per castor . . . . . . . . . . . . . . . . . . . . . . . kg 80

These illustrations shows just some of the options available using combinations of work benches, panels, drawers, Teng Toolsmiddle boxes and 3, 5 or 6 drawer Teng Tools roller cabinets.

Holder brackets

No 11266

Drawer mounted under the work top

Wall Racks

Teng Tools

51


Socket setsTeng Tools. Set of 17 pieces, containing 15 hexagon sockets, 100 mm long extension barand a ratchet handle PT1400.Supplied on wall rack.

Teng Tools. Set of 12 pieces, containing 10 hexagon sockets, 125 mm long extension barand ratchet handle PT3800.Supplied on wall rack.

Teng Tools. Set of 19 pieces. Containing 17 bi-hexagon sockets, 250 mm long extensionbar and ratchet handle PT1200.Supplied on wall rack.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 13188 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . No WR1417Short sockets . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7 8

9 10 11 12 13Long sockets. . . . . . . . . . . . . . . . . . . mm 7 8 10 13Pack. . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 13187 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . No WR3812Size, hexagonal . . . . . . . . . . . . . . . . . . mm 8 10 11 12 13

14 15 16 17 19Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . 13186 -0108Teng Tools . . . . . . . . . . . . No WR1219Size, 12-point . . . . . . . . . . mm 10 11 12 13 14 15 16 17 18

19 20 21 22 24 27 30 32Pack. . . . . . . . . . . . . . . . . . set 5

No 13188

No 13187

No 13186

Wall Racks

Teng

Too

ls

52


Double Flex Wrench Set

Teng Tools. Rack with 6 double swivel head wrenches. Chrome vanadium steel. Withdifferent size 12-point sockets at each end. The sockets fitted using a screw. Chromiumplated.Supplied on wall rack.

Combination Spanner SetTeng Tools. Rack with 12 combination spanners. Chrome vanadium steel. Samedimension at both ends. The bi-hexagon ring head is set at a 15° angle. Polishedheads. Chromium plated.Supplied on wall rack.

Hex Key Wrench Sets

Teng Tools. Rack with 7 hex keys with T-handle in metric and imperial sizes. With ballpointhead on the long key end - which improves access.Supplied on wall rack.

Art. no. . . . . . . . . . . . . . . . . 12823 -0109Teng Tools . . . . . . . . . . . . . No WRDF06No. of keys . . . . . . . . . . . . . ea. 6Sizes . . . . . . . . . . . . . . . . . . mm 8x9 10x11 12x13

14x15 16x17 18x19Pack. . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . 12824 -0108Teng Tools . . . . . . . . . . . No WRSP12No. of keys . . . . . . . . . . . ea. 12Sizes . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13

14 15 16 17 18 19Pack. . . . . . . . . . . . . . . . . set 5

Art. no.. . . . . . . . . . . . 12826 -0106 -0205Teng Tools . . . . . . . . . No WRHEX07 WRHEX07AFSizes . . . . . . . . . . . . . . mm/inch 2.5 3 4 5

6 7 8 3⁄32 1⁄8 5⁄32 3⁄16

7⁄32 1⁄4 5⁄16

Pack.. . . . . . . . . . . . . . set 5 5

No 12823

No 12824

No 12826

Wall Racks

Teng Tools

53


TX/TPX Key Set

Teng Tools. Rack with 7 TX/TPX keys with T-handle. For internal TX heads (short end alsofor tamper proof screws).Supplied on wall rack.

Plier SetTeng Tools. Rack holding four pairs of pliers with two component sleeves, one pair of slipjoint pliers, combination pliers, side cutters and flat nose pliers.Supplied on wall rack.

Screwdriver Set

Teng Tools. A wall rack with 5 Power Thru screwdrivers. Hexagon blade made of TT-MV-steel, satin finish. The blade form allows tightening using an open spanner.Supplied on wall rack.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12827 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRTX07No. of keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 7For TX/TPX-heads . . . . . . . . . . . . . . . . . . . . . No 10 15 20 25

27 30 40Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12833 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRMB04Contents:Slip joint pliers 10″. . . . . . . . . . . . . . . . . . . . . . . . No MB481-10TCombination pliers 7″ . . . . . . . . . . . . . . . . . . . . . No MB452-7TSide cutters 6″ . . . . . . . . . . . . . . . . . . . . . . . . . . . No MB441-6TFlat nose pliers 8″ . . . . . . . . . . . . . . . . . . . . . . . . No MB461-8TPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15158 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRMDT05Containing:Screwdriver MD932 . . . . . . . . . . . . . . . . . . . . . mm 1.2x6.5-100

MD934 . . . . . . . . . . . . . . . . . . . . . mm 1.2x8-150MD935 . . . . . . . . . . . . . . . . . . . . . mm 1.6x10-200MD952 . . . . . . . . . . . . . . . . . . . . . Nr PH2-100MD953 . . . . . . . . . . . . . . . . . . . . . Nr PH3-150

No 12827

No 12833

Nr 15158

Wall Racks

Teng

Too

ls

54


Screwdriver SetTeng Tools. Rack with 10 screwdrivers for slotted heads, Phillips and Pozidriv heads.TT-MV steel blades and ergonomically designed two-component handles.Supplied on wall rack.

File Set

Teng Tools. Rack with 5 handled 10″ hand files.Supplied on wall rack.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12829 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRMD10Contents:Screwdriver MD921 . . . . . . . . . . . . . . . . . . . . . mm 0.5x3.0-100

MD922 . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5-75MD923 . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5-150MD933 . . . . . . . . . . . . . . . . . . . . . mm 1.2x6.5-150MD934 . . . . . . . . . . . . . . . . . . . . . mm 1.2x8.0-150MD940 . . . . . . . . . . . . . . . . . . . . . No PH0-75MD941 . . . . . . . . . . . . . . . . . . . . . No PH1-75MD952 . . . . . . . . . . . . . . . . . . . . . No PH2-100MD961 . . . . . . . . . . . . . . . . . . . . . No PZ1-75MD972 . . . . . . . . . . . . . . . . . . . . . No PZ2-100

Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12866 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRFL05Contents:Flat file FLFT10, length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Flat file FLHF10, length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Half-round file FLHR10, length. . . . . . . . . . . . . . . . . . . . . . . . mm 250Round file FLRD10, length . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Three square file FLTR10, length . . . . . . . . . . . . . . . . . . . . . mm 250Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

No 12829

No 12866

Mecca Rosso

Teng Tools

55


Teng Tools. Series Mecca Rosso. Contains sockets with 6-point openings, fibre reinfor-ced ratchet handle, extension bar 75 mm, 6 bits and hanging hook.Supplied in plastic box.

Teng Tools. Type Mecca Rosso Mini. Registered design. Contains sockets with 6-pointopenings, fibre reinforced ratchet handle, extension bars 75 mm, 8 bits and hanging hook.Supplied in plastic box.

Mecca Rosso Socket Sets 1⁄4″ Drive

Teng Tools. Mini set of 24 parts. Containing 11 hexagon sockets, 10 bits, mini-ratchethandle, 100 mm long extension bar and bit holder.Supplied in plastic case.

Teng Tools. Mini set containing one bit ratchet handle, 9 x 1⁄4″-sockets, extension bar 50mm, adaptor ext.1⁄4″❒x1⁄4″-g ext., 10 bits as well as an adjustable wrench.

Mini Socket Sets 1⁄4″ Drive

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 12252 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No M1423No. of pieces. . . . . . . . . . . . . . . . . . . . . . ea. 23Sockets’ dim. . . . . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7 8 10 12 13Bits for slotted heads . . . . . . . . . . . . . . . mm 0.8x4 1.0x5.5 1.2x6.5Bits for Phillips-heads . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads . . . . . . . . . . . . . No 1 2Bits for TX-heads . . . . . . . . . . . . . . . . . . TX 10 15 20Case size. . . . . . . . . . . . . . . . . . . . . . . . . mm 160x80x30Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.3Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13210 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No M1424No. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 24Hexagon sockets . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7 8

9 10 11 12 13Bits for slotted heads. . . . . . . . . . . . . . . . . . . . . mm 4 5.5 6.5Bits for Phillips heads . . . . . . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv heads . . . . . . . . . . . . . . . . . . . No 1 2Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2746 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1423No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 23Sockets’ dim.. . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7

8 10 11 12 13Bits for slotted heads . . . . . . . . . . . . . . . . . . . . . mm 0.8×4 1.2×5.5Bits for Phillips-heads . . . . . . . . . . . . . . . . . . . . No 1 2Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . . . TX 15 20Bits for hex holes . . . . . . . . . . . . . . . . . . . . . . . . mm 5 6Case size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 160x100x35Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10168 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1429No. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 29Sockets’ dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7

8 10 11 12 13Combination spanners . . . . . . . . . . . . . . . . . . . mm 5.5 6 7 8 9

10 11 12 13Bits for slotted heads. . . . . . . . . . . . . . . . . . . . . mm 0.8×4 1.2×5.5Bits for Phillips-heads . . . . . . . . . . . . . . . . . . . . No 1 2Bits for TX-heads. . . . . . . . . . . . . . . . . . . . . . . . TX 8 TX10Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . . . . mm 250x130x45Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.9

No 12252

No 13210

No 2746

No 10168

Mecca Rosso

Teng

Too

ls

56


Mecca Rosso Socket Sets 1⁄4″ DriveTeng Tools. Series Mecca Rosso. Registered design. Industrial quality. Contains 11shortand 4 long sockets with 6-point openings, fibre reinforced ratchet handle, extension bar 50mm, 11 bits, bit socket, Bi-flex spanner and universal joint.Supplied in plastic box with a registered design. Tool mat in the case’s lid. The underside ofthe case is fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Set of 35 pieces containing 6-point sockets in inchsizes - short as well as long. In addition, includes 11 screwdriver bits, fibre reinforcedreversible ratchet, universal joint, extension bars 50 and 100 mm, adaptor drive 3⁄8″ - 1⁄4″, hexkeys 1.5, 2.0 and 2.5 mm as well as bit socket.Supplied in plastic case with click lock and folding handle. The underside of the case is fittedwith rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Contains sockets with 6-point openings. In addition,includes bit socket 1⁄4″-g, adapter drive 3⁄8″-1⁄4″, extension bars 50 and 100 mm, universaljoint, fibre reinforced ratchet handle with lever for reversible action and three hexagon keysand 11 bits.Supplied in plastic box with registered design. Tool mat in the case’s lid. The underside ofthe case is fitted with rubber feet to prevent it from sliding.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0469 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1431BFNo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 31No. of sockets . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 15Sockets’ dim. (short). . . . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7 8

9 10 11 12 13Sockets’ dim. (deep). . . . . . . . . . . . . . . . . . . . . mm 8 10 12 15Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . . TX- 8 10 15 20 25Bits for hex holes. . . . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 7 8Case size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250x130x45Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6857 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1435AFMeasurement system . . . . . . . . . . . . . . . . . . InchNo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 35Sockets short . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄16 7⁄32 1⁄4 9⁄32

5⁄16 11⁄32 3⁄8 7⁄16 1⁄2Sockets long . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄16 1⁄4 5⁄16 3⁄8 7⁄16 1⁄2Bits for slotted heads . . . . . . . . . . . . . . . . . . . mm 0.8x4.0 1.2x5.5Bits for Phillips-heads . . . . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads . . . . . . . . . . . . . . . . . No 1 2Bits for hex holes . . . . . . . . . . . . . . . . . . . . . . mm 5 6Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5895 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1436No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 36No. of sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 16Socket dim. short. . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7

8 10 11 12 13Socket dim. deep. . . . . . . . . . . . . . . . . . . . . . . . . mm 6 7 8 10 12 13Bits for hex holes . . . . . . . . . . . . . . . . . . . . . . . . . mm 5 6Bits for TX-heads. . . . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20Bits for slotted heads . . . . . . . . . . . . . . . . . . . . . mm 0.8×4 1.2×5.5Bits for Phillips-heads. . . . . . . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads . . . . . . . . . . . . . . . . . . . . No 1 2Hex keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.9

No 0469

No 6857

No 5895

Mecca Rosso

Teng Tools

57


Mecca Rosso Socket Sets 1⁄4″ DriveTeng Tools. Series Mecca Rosso. 48 piece set containing regula and ddp 6 point soc-skets, TX-E sockets, fibre reinforced ratchet, universla joint, 6″ spinner hndle, 4″ extensionbar, 3⁄8″x1⁄4″ adaptor and bits. Supplied in plastiv red case with click lock and folding handle. Tool mat in the case’s lid. Theunderside of the case i fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Set with 60 parts - containing hexagon sockets - regularand deep, metric and AF-sizes and bit sockets. Also containing fibre reinforced ratchethandle, bits holder 1⁄4″g, 2″ and 4″ extension bars, spinner handle, universal joint, T-barand 6 pc screwdriver bits. Supplied in red plastic box with click lock and folding handle. Tool mat in the case lid. Theunderside of the cas is fitted with rubber feet to prevent it from sliding.

All of the items included in Teng Tools socket sets and clip rail sets are available individually.The complete range of satin finish sockets and accessories are detailed on pages 82 to 100of this catalogue together with all the technical details regarding tolerances and dimen-sions.

Details of the full range of chrome sockets and accessories can be found on the Teng Toolswebsite or are available from your local Teng Tools stockist.

Mecca Rosso Clip Rails 1⁄4″ DriveTeng Tools. Series Mecca Rosso. Set of 12 sockets with 6 point ope-nings. Chrome vanadium steel. Satin finish. Supplied on a clip holder with socket clips.

Art. nro.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13213 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1448No. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Redular sockets, 6-point . . . . . . . . . . . . . . . . . . . . . . . mm 4 5.5 6 7

8 10 11 12 13Deep socskets, 6 point . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5.5 6 7 8

9 10 11 12 13TX-E sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 6 7 8Socket bits for Phiilip heads . . . . . . . . . . . . . . . . . . . . PH 0 1 2 3Socket bits for Pozidriv heads . . . . . . . . . . . . . . . . . . PZ 1 2 3TX Socket bits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25

27 30 40Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 350x180x55Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15167 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1460No of parts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 60Regular sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 4 4.5 5 5.5 6 7

8 9 10 11 12 13Regular sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄16 7⁄32 1⁄4 9⁄32 5⁄16

11⁄32 3⁄8 7⁄16 1⁄2Deep socskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 6 7 8 10 12 13Regular sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4 5⁄16 3⁄8 7⁄16 1⁄2Bit sockets flat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5.5 7Bit sockets for TX-heads . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25 27Bit sockets for PH-heads . . . . . . . . . . . . . . . . . . . . . No 1 2Bit sockets for int. hex holes . . . . . . . . . . . . . . . . . . mm 5 6Bits for slotted heads . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5.5Screwdriver bits for PH-heads . . . . . . . . . . . . . . . . No 1 2Screwdriver bits for PZ-heads. . . . . . . . . . . . . . . . . No 1 2Case size. LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . mm 350x180x55Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.6Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no. . . . . . . . . . . . . . . . . 11707 -0102Teng Tools . . . . . . . . . . . . . No M1412No. of sockets. . . . . . . . . . . 12Socket dim. . . . . . . . . . . . . . mm 4 4.5 5 5.5 6 7

8 9 10 11 12 13Pack. . . . . . . . . . . . . . . . . . . set 10

No 13213

No 15167

No 11707

Mecca Rosso

Teng

Too

ls

58


Mecca Rosso Clip Rails 1⁄4″ Drive

Teng Tools. Series Mecca Rosso. Deep sockets with 6 point openings. Chrome vanadiumsteel. Satin finish. Supplied on a clip holder with socket clips.

Teng Tools. Series Mecca Rosso. Set containing TX-sockets for internal TX heads. Forhand tightening. Supplied on clip-holder with socketclips.

Teng Tools. Series Mecca Rosso. 34 piece set. Containing metric rectangular adnd deep6-point sockets, fibre reinforced ratchet, bent type flex handle, spark plug sockets 16 and 21mm, 3″ and 6″ extension bars, universal joint and and adaptor 1⁄2″-3⁄8″.Supplied in red plastic case with click lock and folding handle. Tool mat in the case’s lid. Theunderside of the case is fitted with rubber feet.

Mecca Rosso Socket Sets 3⁄8″ DriveTeng Tools. Type Mini Rosso. Registered design. Industrial quality. Contains 9 socketswith 6-point openings, fibre reinforced ratchet handle, extension bar 75 mm, bit socket1⁄4″-g, 11 bits and hanging hook.Supplied in plastic box.

Art. no . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7309 -0102Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . No M1407Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 6 7

8 9 10 12 13Socket’s length . . . . . . . . . . . . . . . . . . . . . mm 50Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . s 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . 15170 -0101Teng Tools . . . . . . . . . . . . . . . . . . . No MR3834No of parts. . . . . . . . . . . . . . . . . . . . ea. 34Regular sockets . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14 15

16 17 18 19 20 21 22Deep sockets . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13

14 15 17 19 22Case dim. LxWxH . . . . . . . . . . . . . mmWeight . . . . . . . . . . . . . . . . . . . . . . . kgPack. . . . . . . . . . . . . . . . . . . . . . . . . sts 4

Art. no. . . . . . . . . . . . . . . . . . . . 11709 -0209Teng Tools . . . . . . . . . . . . . . . . No M1408TX No. of sockets . . . . . . . . . . . . . . 7Socket sizes . . . . . . . . . . . . . . . TX- 10 15 20 25

27 30 40 Max. slot width . . . . . . . . . . . . . mm 2.74 3.27 3.86 4.43

4.99 5.52 6.65For screw. . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5

5-6 6-7 7-8 Pack. . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2747 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR3824No. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 24Sockets’ dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 8 10 11 12 13

14 15 17 19Bits for slotted heads. . . . . . . . . . . . . . . . . . . . . . mm 0.8×4 1.2×5.5Bits for Phillips-heads . . . . . . . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads . . . . . . . . . . . . . . . . . . . . No 1 2Bits for hex holes . . . . . . . . . . . . . . . . . . . . . . . . . mm 5 6Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20Hanging hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 1Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

No 15170

No 2747

No 11709

No 7309

Mecca Rosso

Teng Tools

59


Mecca Rosso Socket Sets 3⁄8″ DriveTeng Tools. Series Mecca Rosso. Set of 35 pieces containing 6-point sockets in inchsizes - short as well as long. In addition, includes 2 spark plug sockets 16 and 21 mm, 11screwdriver bits, fibre reinforced ratchet handle for reversible action, universal joint, ex-tension bars 100 and 150 mm, adapter 1⁄2″ - 3⁄8″ as well as bit socket.Supplied in plastic case with click lock and folding handle. The underside of the case is fittedwith rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Contains 20 sockets with 6-point openings. In addition,includes bit socket 1⁄4″-g, adaptor drive 1⁄2″-3⁄8″, extension bars with ball 75 and 150 mm,universal joint, 2 spark plug sockets (16 and 21 mm), fibre reinforced ratchet handle withlever for reversible action and 11 bits.Supplied in plastic case with click lock and folding handle. Tool mat in the case’s lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Socket/Combination spanner set. Contains 14 sock-ets with 6-point openings. In addition, includes extension bar 150 mm, universal joint, bitsocket 1⁄4″-g, adaptor drive 1⁄2″-3⁄8″, fibre reinforced ratchet handle with lever for reversibleaction, 9 combination spanners and 11 screwdriver bits.Supplied in plastic case with click lock and folding handle. The underside of the case is fittedwith rubber feet to prevent it from sliding.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6860 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR3835AFMeasurement system. . . . . . . . . . . . . . . . . . InchNo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . ea. 35Sockets short. . . . . . . . . . . . . . . . . . . . . . . . . inch 5⁄16 3⁄8 7⁄16 1⁄2 9⁄16

5⁄8 11⁄16 3⁄4 11⁄16 7⁄8Sockets deep. . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8 7⁄16 1⁄2 9⁄16 11⁄16 3⁄4Bits for slotted heads . . . . . . . . . . . . . . . . . . mm 0.8x4.0 1.2x5.5Bits for Phillips-heads . . . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads. . . . . . . . . . . . . . . . . No 1 2Bits for hex holes . . . . . . . . . . . . . . . . . . . . . mm 5 6Bits for TX heads. . . . . . . . . . . . . . . . . . . . . . TX 10 15 20Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5900 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No MR3839No. of pieces . . . . . . . . . . . . . . . . . . . . . . . ea. 39Socket dim. short (14). . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 1819 20 22Socket dim. deep (6). . . . . . . . . . . . . . . . . mm 8 10 12 13 17 19Spark plug socket . . . . . . . . . . . . . . . . . . . mm 15.9 (5⁄8) 21 (13⁄16)Bits for slotted heads . . . . . . . . . . . . . . . . mm 0.8×4 1.2×5.5Bits for Phillips-heads . . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads . . . . . . . . . . . . . . . No 1 2Bits for TX-heads. . . . . . . . . . . . . . . . . . . . TX 10 15 20Bits for hex holes . . . . . . . . . . . . . . . . . . . . mm 5 6Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.5

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1391 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . No MR3840No. of pieces . . . . . . . . . . . . . . . . . . . . . . . ea. 39Sockets’ dim.. . . . . . . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 18 19 21 22Bits for slotted heads . . . . . . . . . . . . . . . . mm 0.8×4 1.2×5.5Bits for Phillips heads. . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads. . . . . . . . . . . . . . . No 1 2Bits for hex holes . . . . . . . . . . . . . . . . . . . mm 5 6Bits for TX heads . . . . . . . . . . . . . . . . . . . TX 10 15 20Combination spanners. . . . . . . . . . . . . . . mm 8 10 11 12 13

14 15 17 19Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.3

No 6860

No 5900

No 1391

Mecca Rosso

Teng

Too

ls

60


Mecca Rosso Socket Sets 3⁄8″ DriveTeng Tools. Series Mecca Rosso. Set of 48 pieces containing 14 sockets with 6-pointopenings, spark plug sockets 16 and 21 mm, 14 combination spanners, 6 screwdrivers, 5pliers, 1 adjustable wrench, ratchet handle for reversible action, extension bars 75 and 150mm, bit socket and adaptor drive 1⁄2″-3⁄8″.Supplied in plastic box. The underside of the case is fitted with rubber feet to prevent it fromsliding.

Teng Tools. Series Mecca Rosso. Mechanic set. Registered design. Industrial quality.Contains 1⁄4″-g bit screwdriver with magnet, 3⁄8″ torque wrench with ratchet mechanism, 3⁄8″impact screwdriver, 14 short and 6 long sockets with 6-point openings, 2 spark plug sockets16 and 21 mm, 16 1⁄4″-g screwdriver bits, fibre reinforced ratchet handle with lever forreversible action, universal joint, 2 extension bars 75 and 150 mm, adaptor drive 1⁄2″-3⁄8″, 2 bitsockets 3⁄8″-❒-1⁄4″-g, adapter ext. 1⁄4″-g-3⁄8″-❒.Supplied in plastic case with click lock and folding handle. The underside of the case is fittedwith rubber feet to prevent it from sliding.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 11723 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No MR3848No. of pieces . . . . . . . . . . . . . . . . . . . . . ea. 48No. of sockets . . . . . . . . . . . . . . . . . . . . ea. 16Sockets’ dim. (10) . . . . . . . . . . . . . . . . . mm 8 10 12 13 14

15 16 17 18 19Sockets’ dim. (4) . . . . . . . . . . . . . . . . . . mm 7⁄16 1⁄2 9⁄16 11⁄16

Spark plug socket . . . . . . . . . . . . . . . . . mm 16 21Combination spanners . . . . . . . . . . . . . mm 8 10 12 13 14

15 16 17 18 19Combination spanners . . . . . . . . . . . . . inch 7⁄16 1⁄2 9⁄16 11⁄16

Side cutters . . . . . . . . . . . . . . . . . . . . . . mm 150Combination pliers . . . . . . . . . . . . . . . . mm 175Flat nose pliers . . . . . . . . . . . . . . . . . . . mm 200Water pump pliers . . . . . . . . . . . . . . . . . mm 250Universal pliers . . . . . . . . . . . . . . . . . . . mm 175Adjustable wrench. . . . . . . . . . . . . . . . . mm 200Screwdrivers, flat blade . . . . . . . . . . . . mm 0.5x3.0 1.0x5.5 1.2x6.5Screwdrivers, Phillips . . . . . . . . . . . . . . No 0 1 2Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . kg 6.0

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1417 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . No MR3849No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . ea. 49Sockets’ dim. (short) . . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 18 2122Sockets’ dim. (deep) . . . . . . . . . . . . . . . . . . mm 8 10 12 13 17 19Spark plug socket . . . . . . . . . . . . . . . . . . . . . mm 16 21Torque wrench (3⁄8-❒) . . . . . . . . . . . . . . . . . Nm 20-100Bit screwdriver, drive . . . . . . . . . . . . . . . . . . inch 1⁄4-gBits 1⁄4-g 40 mm longBits for slotted heads . . . . . . . . . . . . . . . . . . mm 0.8×4 1.2×6 1.4×8Bits for Phillips heads . . . . . . . . . . . . . . . . . No 1 2Bits for hex holes . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8Bits for TX heads . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25 30 40Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 4.3

No 11723

No 1417

Mecca Rosso

Teng Tools

61


Mecca Rosso Socket Sets 3⁄8″ DriveTeng Tools. Series Mecca Rosso. Socket/tool set containing fibre reinforced ratchethandle, universal joint, extension bars 75 and 150 mm, bit socket, adaptor 1⁄2″- 3⁄8″, bitscrewdriver with magnet, 14, 6-point sockets, 10 combination spanners, 6 screwdrivers, 4pliers as well as 26 bits.Supplied in plastic box. Tool mat in the case’s lid. The underside of the case is fitted withrubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Sets containing 9 TPX-sockets for internal heads (alsofor tamper proof screws). For hand tightening. Supplied on clip-holder with socket-clips.

Mecca Rosso Clip Rails 3⁄8″ DriveTeng Tools. Series Mecca Rosso. 3/8″ drive sockets of chrome van-adium steel with 6 point openings. Satin finish. Supplied on a clip holder with socket clips.

Teng Tools. Series Mecca Rosso. Set of 9 chrome vanadium sockets internal hex holes.For hand tightening. Supplied on a clip holder with socket clips.

Teng Tools. Series Mecca Rosso. Chrome vanadium steel. With 6 point opening. Withrubber insert. External hexagonal grip 24 mm for tightening with a spanner. Satin finish.

Art. no. . . . . . . . . . . . . . . . . . 6884 -0107Teng Tools . . . . . . . . . . . . . . No M3813TPXTPX-sockets . . . . . . . . . . . . . TPX- 10 15 20 25 27

30 40 45 50Max. slot width . . . . . . . . . . . mm 2.74 3.27 3.86 4.43 4.99

5.52 6.65 7.82 8.83For screw . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 4.5-6

6-7 7-8 8-10 10Pack. . . . . . . . . . . . . . . . . . . . set 6

Art. no. . . . . . . . . . . . . 6883 -0108 -0207Teng Tools . . . . . . . . . No M3812 M3811Size . . . . . . . . . . . . . . . mm/inch 3 4 5 5.5

6 7 8 10 123⁄32 1⁄8 5⁄32 3⁄167⁄16 1⁄4 5⁄16 3⁄8

Pack. . . . . . . . . . . . . . . set 6 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 7316 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No M3807Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10 12 13 14

15 17 19Socket length . . . . . . . . . . . . . . . . . . . . . mm 45-65Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . 11666 -0101Teng Tools . . . . . . No M3816Size . . . . . . . . . . . . mm 7 8 9 10 11 1213 14

15 16 17 18 19 20 21 22Pack. . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10174 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR3867No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 67Sockets’ dim. (hexagon) . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 18 19 20 22Combination spanners . . . . . . . . . . . . . . . . . . . mm 8 10 11 12 13

14 15 16 17 18 19Screwdrivers for slotted heads . . . . . . . . . . . . mm 0.6×3.2 1.0×5 1.4×6.0Screwdrivers for Phillips-heads . . . . . . . . . . . No 0 1 2Side cutters, length . . . . . . . . . . . . . . . . . . . . . . mm 150Combination pliers, length . . . . . . . . . . . . . . . . mm 175Flat nose pliers, length . . . . . . . . . . . . . . . . . . . mm 200Water pump pliers, length . . . . . . . . . . . . . . . . mm 250Bits for slotted heads . . . . . . . . . . . . . . . . . . . . mm 0.8x4 1.2x5 1.2x7Bits for Phillips-heads. . . . . . . . . . . . . . . . . . . . No 0 1 2 3Bits for Pozidriv-heads . . . . . . . . . . . . . . . . . . . No 1 2 3Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . . TX- 8 10 15 20 25

27 30 40 45 50Bits for int. hex holes . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8 10Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . mm 550x280x60Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 4.7

Nr 11666

No 7316

No 6884

No 10174

No 6883

Mecca Rosso

Teng

Too

ls

62


Teng Tools. Series Mecca Rosso. Set containing 16 short hexagon sockets, 8 longhexagon sockets, adaptor drive 3⁄8″- 1⁄2″, spark plug socket 16 and 21mm as well as hex keys1.5, 2.0 and 2.5 mm.Supplied in plastic box. Tool mat in the case’s lid. The underside of the case is fitted withrubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. 31 piece TX and TX-E socket set containing 9 piece 55mm TX bit sockets, 9 piece 100 mm TX bit socskets, 9 piece TX-E sockets, fibre reinforcedratchet handle, universal joint, 5″ extension bar and 3⁄8″-1⁄2″ adaptor. Supplied in red plasticase with click lock and floding handle. Tool mat in the case’s lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Contains sockets with 12-point resp. 6-point openings.In addition, includes two extension bars (length 63 and 150 mm), universal joint, adaptordrive 1⁄2″-3⁄8″ and fibre reinforced ratchet handle with lever for reversible action.Supplied in plastic box. Tool mat in the case’s lid. The underside of the case is fitted withrubber feet to prevent it from sliding.

Mecca Rosso Socket Sets 1⁄2″ Drive

Teng Tools. Series Mecca Rosso. Short TX-E sockets with 1⁄4″ and 3⁄8″❒-drive. Chromevanadium steel. Satin finish. Supplied on a clip holder with socket clips.

Mecca Rosso Clip Rails 3⁄8″ DriveTeng Tools. Series Mecca Rosso. Set containing 9 TX-sockets for internal TX heads. Forhand tightening. Supplied on clip holder with socket clips.

Art. no. . . . . . . . . . . . . . . . . . . . . . 12251 -0100Teng Tools . . . . . . . . . . . . . . . . . . No MR1234Short sockets dim. . . . . . . . . . . . . mm 10 11 12 13 14 15 16 17

18 19 20 21 22 23 24 27Long sockets dim. . . . . . . . . . . . . mm 13 14 15 16 17 18 19 24Case dim. LxWxH . . . . . . . . . . . . mm 450x230x55Weight . . . . . . . . . . . . . . . . . . . . . . kg 5.48Pack. . . . . . . . . . . . . . . . . . . . . . . . sts 4

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 0485 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . No M3814Size (1⁄4″-drive). . . . . . . . . . . . . . . . . . . TX-E 4 5 6 7 8Size (3⁄8″-drive). . . . . . . . . . . . . . . . . . . TX-E 10 12 14 16 18Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . 10218 -0106Teng Tools . . . . . . . . . . . . No M3813TX TX-sockets . . . . . . . . . . . . TPX-/TX- 10 15 20 25 27

30 40 45 50Max. slot width . . . . . . . . . mm 2.74 3.27 3.86 4.43 4.99

5.52 6.65 7.82 8.83For screw . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 4.5-6

6-7 7-8 8-10 10Pack. . . . . . . . . . . . . . . . . . sts 6

Art. no. . . . . . . . . . . . . . . . . 0539 -0109 -0182 -0208Teng Tools . . . . . . . . . . . . . No MR1221 MR1221-6 MR1220AFMeasurement system. . . . Millimetre Millimetre American AFSize . . . . . . . . . . . . . . . . . . . 12-point 6-point 12-pointNo. of pieces . . . . . . . . . . . ea. 21 20Sockets’ dim. . . . . . . . . . . . mm/inch 10 11 12 13 14

15 16 17 18 193⁄8 7⁄16 1⁄2 9⁄16 5⁄8

11⁄16 3⁄4 13⁄16 7⁄8 15⁄16

21 22 24 27 30 32 1 11⁄16 11⁄8 13⁄16 11⁄4Weight. . . . . . . . . . . . . . . . . kg 2.95 3.1

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13211 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . No MR1231No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . 31Bit sockets 55 mm . . . . . . . . . . . . . . . . . . . TX 20 25 27 30 40

45 50 55 60Bit sockets100 mm . . . . . . . . . . . . . . . . . . TX 20 25 27 30 40

45 50 55 60TX-E sockets. . . . . . . . . . . . . . . . . . . . . . . . E 10 11 12 14 16

18 20 22 24Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 450x230x55Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.8

No 12251

No 13211

No 0539

No 0485

No 10218

Mecca Rosso

Teng Tools

63


Mecca Rosso Socket Sets 1⁄2″ DriveTeng Tools. Series Mecca Rosso. 35 piece socket set containing 16 pcs 12 point sockets,9 pcs 55 mm hex bit sockets, 6 pcs 100 mm hex bit sockets, fibre reinforced ratchet handle,universal joint, 6″ extension bar, 3⁄8″-1⁄2″ adaptor.Supplied in red plastic case with click lock and folding handle. Tool mat in case’s lid. Theunderside of case is fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Set of 37 parts. Containing 6-point segular socketsmetric and AF-sizes, fibre reinforced ratchet handle, spark plug sockets 16 and 21 mm,extension bars 21⁄2″, 5″ and 10″, universal joint, 17″ T-bar, adaptor 3⁄8″-1⁄2″ and a spin disc.Supplied in red plastic case with click lock and folding handle. Tool mat in the case lid. Theunderside of the case is fitted with rubber feet fot prevent it from sliding.

Teng Tools. Series Mecca Rosso. Registered design. Industrial quality. Contains 33sockets with 12-point openings and fibre reinforced ratchet handle, universal joint, 3extension bars - length 75, 125 and 250 mm, and one adaptor drive 3⁄8″-1⁄2″.Supplied in plastic case with click lock and folding handle. The underside of the case is fittedwith rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Set containing fibre reinforced ratchet handle, univer-sal joint, extension bars 125 and 250 mm, adaptor drive 3⁄8″- 1⁄2″, 18 sockets with 12-pointopenings and 17 combination spanners.Supplied in plastic box in registered design. Tool mat in the case’s lid. The underside of thecase is fitted with rubber feet to prevent it from sliding.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13212 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No MR1235No. of pieces . . . . . . . . . . . . . . . . . . . . . . 35Socket dim.. . . . . . . . . . . . . . . . . . . . . . . . mm 10 11 12 13 14 15 16 17

18 19 21 22 24 27 30 32Hex bit socskets (55 mm). . . . . . . . . . . . mm 5 6 7 8 9 10 12 14 17Hex bit sockets (100 mm). . . . . . . . . . . . mm 5 6 7 8 10 12 Cas diam. LxWxH . . . . . . . . . . . . . . . . . . mm 450x230x55Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.15Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 4

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15169 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1237No of parts . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 37Socket sizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 10 12 13 14 15 16 17

18 20 21 23 24 27 32Socket sizes . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8 7⁄16 1⁄2 19⁄32 5⁄8 11⁄16

3⁄4 25⁄32 13⁄16 7⁄8 1 13⁄16

Case dimensions. LxWxH . . . . . . . . . . . . . mm 550x280x60Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 6.66Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 3

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10173 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1240No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . ea. 40Sockets’ dim. (12-point) . . . . . . . . . . . . . . . . mm 10 11 12 13 14 15

16 17 18 19 20 2122 23 24 27 30 32

Combination spanners . . . . . . . . . . . . . . . . . mm 10 11 12 13 14 1516 17 18 19 20 21

22 24 27 30 32Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . . mm 550x280x60Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 7.6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0252 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1239No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 39Measurement system. . . . . . . . . . . . . . . . . . . Millimetre + InchSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-pointSockets - millimetre (18) . . . . . . . . . . . . . . . . mm 10 11 12 13 14 15

16 17 18 19 20 2122 23 24 27 30 32

Sockets - inch (15) . . . . . . . . . . . . . . . . . . . . . inch 3⁄8 7⁄16 1⁄2 9⁄16 5⁄811⁄16 3⁄4 13⁄16 7⁄8 15⁄16

1 11⁄16 11⁄8 13⁄16 11⁄4Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 5.4

No 10173

No 0252

No 15169

No 13212

Mecca Rosso

Teng

Too

ls

64


Mecca Rosso Socket Sets 1⁄2″ DriveTeng Tools. Series Mecca Rosso. 51 piece socsket set containing regular and deepmetric sockets, fibre reinforced ratchet handle, angulara gauge torque wrench, spark plugand wheel nut sockets, impact driver and impact bits adaptor and bits. Supplied in red platic case with click lock and folding handle. Tool mat in case’s lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Set of 9 1/2″ drive TX-sockets for external TX heads.Fitted on clip holder with socket clips. Satin finish.

Mecca Rosso Clip Rails 1⁄2″ DriveTeng Tools. Series Mecca Rosso. Sets of 15 12 point sockets of chrome vanadium steel.Fitted on clip holder with socket clips. Satin finish.

Teng Tools. Series Mecca Rosso. Set of 8 deep sockets with 6 point openings. Satinfinish.Supplied with clip holder and socket clips.

Teng Tools. Series Mecca Rosso. Deep sockets with 12 point openings. Chrome van-adium steel. Satin finish. Supplied on clip holder with socket clips.

Art. no. . . . . . . . . . . . . . . . . . . 11661 -0104Teng Tools . . . . . . . . . . . . . . . No M1210No. of sockets . . . . . . . . . . . . 9Socket sizes. . . . . . . . . . . . . . E10 E11 E12 E14 E16

E18 E20 E22 E24Weight. . . . . . . . . . . . . . . . . . . kg 1.07Pack. . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10171 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No M1208-6Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 13 14 15 16

17 18 19 24Socket’s length . . . . . . . . . . . . . . . . . . . . mm 80Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 7310 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No M1207Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 13 14 15 17

19 21 22 24Socket length . . . . . . . . . . . . . . . . . . . . . mm 80Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . 2813 -0102 -0201Teng Tools . . . . . . No M1215MM M1215AFSize . . . . . . . . . . . . mm/tum 10 12 13 14 15

16 17 18 19 2122 24 27 30 32

3⁄8 7⁄16 1⁄2 9⁄16 5⁄811⁄16 3⁄4 13⁄16 7⁄8 15⁄16

11⁄16 11⁄8 13⁄16 11⁄4Pack. . . . . . . . . . . . set 6 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13214 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No MR1251Redular sockets . . . . . . . . . . . . . . . . . . . . mm 10 11 12 13 14 15 16 17

18 19 21 22 24 27 30 32Deep sockets. . . . . . . . . . . . . . . . . . . . . . . mm 10 13 18 24Spark plug sockets . . . . . . . . . . . . . . . . . . mm 16 18 21Wheel nut sockets . . . . . . . . . . . . . . . . . . mm 17 19 21Torque wrench 1⁄2″ ❒-drive . . . . . . . . . . . Nm 40-200Spinner handle ❒-drive . . . . . . . . . . . . . . inch 1⁄2Adeptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 5⁄16″g - 3⁄8″ ❒Bit adptor 1⁄2″ ❒ . . . . . . . . . . . . . . . . . . . . . inch 5⁄16″gBits 5⁄16″ flat . . . . . . . . . . . . . . . . . . . . . . . . mm 6 8 10 12Bits 5⁄16″ for Phillips heads . . . . . . . . . . . . Nr 1 2 3 4Bits 5⁄16″ hex . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 6 8Bits 5⁄16″ for TX heads . . . . . . . . . . . . . . . . TX 30 40 45 50 55Case LxWxH . . . . . . . . . . . . . . . . . . . . . . . mm 550x280x60Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 7.91

No 2813

No 7310

No 13214

No 10171

No 11661

Mecca Rosso

Teng Tools

65


Teng Tools. Type Mecca Rosso Jumbo. Registered design. Industrial quality. Contains101 pieces, among others, 1⁄4″, 3⁄8″ and 1⁄2″ sockets with 6-point openings, 1⁄4″-g-bits anddifferent socket tools, combination spanners and swivel head wrenches.Supplied in plastic case with click lock and folding handle. The underside of the case is fittedwith rubber feet to prevent it from sliding.

Mecca Rosso Socket SetsCombined Drive Sets 1⁄4″, 3⁄8 ″ and 1⁄2″

Teng Tools. Series Mecca Rosso. Sets consisting of 9 sockets for internal TX heads(M1213TPX also for tamper proof screws). For hand tightening. Satin finish. The sockets aresupplied on a clip holder with socket clips.

Teng Tools. Series Mecca Rosso. Set consisting of 9 sockets for internal hex holes. Forhand tightening. Satin finish. The sockets are supplied on a clip holder, secured with socketclips.

Mecca Rosso Clip Rails 1⁄2″ DriveTeng Tools. Set consisting of six 100 mm long sockets hex type bits. For hand tightening.Satin finish. The sockets are supplied on a clip-holder, secured with socket-clips.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2745 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR101No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 101Sockets 1⁄4″, short (10) . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 5.5 6 7

8 10 11 12 13Sockets 1⁄4″, deep (6) . . . . . . . . . . . . . . . . . . . . . . . mm 6 7 8 10 12 13Sockets 3⁄8″ (14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 18 19 21 22Sockets 1⁄2″ (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 19 24 27 30 32Spark plug socket . . . . . . . . . . . . . . . . . . . . . . . . . . . 3⁄8-16 mm, 1⁄2-21 mmRatchet handles (2) . . . . . . . . . . . . . . . . . . . . . . . . . 1⁄4, 3⁄8Extension bars 50 & 75 mm . . . . . . . . . . . . . . . . . . ❒ 1⁄4Extension bars 75 & 150 mm . . . . . . . . . . . . . . . . . ❒ 3⁄8Extension bars 65 & 250 mm . . . . . . . . . . . . . . . . . ❒ 1⁄2Universal joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄4, 3⁄8, 1⁄2Bit socket 1⁄4″-g . . . . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄4, 3⁄8Bit screwdriver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . g 1⁄4Adaptor drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 3⁄8-1⁄2Adaptor drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 3⁄8-1⁄4, 1⁄2-3⁄8Combination spanners (10). . . . . . . . . . . . . . . . . . . mm 8 10 11 12 13

14 15 16 17 18Holder ring for combination spanners . . . . . . . . . . ea. 1Swivel wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10×11 12×13 14×15Bits 1⁄4-g-driveBits for TX-heads (8) . . . . . . . . . . . . . . . . . . . . . . . . TX 8 10 15 20 25 27 30 40Bits for twelve point heads (2) . . . . . . . . . . . . . . . . M 5 6Bits for slotted heads (3) . . . . . . . . . . . . . . . . . . . . . mm 0.8×4 1.2×5.5 1.2×7Bits for Phillips-heads (4) . . . . . . . . . . . . . . . . . . . . No 0 1 2 3Bits for Pozidriv-heads (3). . . . . . . . . . . . . . . . . . . . No 1 2 3Bits for hex holes (6) . . . . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8 10Bits for hex holes (7) . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄8 9⁄64 6⁄32 3⁄16

7⁄321⁄4 3⁄8Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 6.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 3

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1907 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No M1212Sockets for int. hex holes . . . . . . . . . . . . . . . . . . . . . . mm 5 6 7 8 9

10 12 14 17Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11891 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No M1211Sockets for int. hex holes. . . . . . . . . . . . . . . . . . . . mm 5 6 7 8 10 12Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.52Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 10

Art. no.. . . . . . . . . . . . . . . 3819 -0054 -0104Teng Tools. . . . . . . . . . . . No M1213TX M1213TPXFor TX. . . . . . . . . . . . . . . . No 20 25 27 30 40

45 50 55 6020 25 27 30 40

45 50 55 60Weight per set . . . . . . . . . kg 0.6 0.6Pack.. . . . . . . . . . . . . . . . . set 6 6

No 2745

No 3819

No 1907

No 11891

Mecca Rosso

Teng

Too

ls

66


Combined Drive Sets 1⁄4″, 3⁄8 ″ and 1⁄2″Mecca Rosso Socket SetsTeng Tools. Series Mecca Rosso. Contains 38 sockets with 6-point openings. In addition,includes bit sockets 1⁄4″ and 3⁄8″, extension bars 50 and 100 mm (1⁄4″) and 75 mm swivel and150 mm standard extension bars (3⁄8″), universal joints 1⁄4″ and 3⁄8″, adaptor drives 3⁄8″-1⁄4″and 1⁄2″-3⁄8″, glass fibre reinforced ratchet handle 1⁄4″ and 3⁄8″, 3 hexagon keys and 11 bits.Supplied in plastic case with click lock and folding handle. Tool mat in the case’s lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso.Contains 24 sockets with 6-point openings. In addition,includes bit socket 1⁄4″-g, extension bars 50 and 150 mm (1⁄4″) and 75 and 125 mm (1⁄2″),adaptor drive 1⁄2″-3⁄8″ and 3⁄8″-1⁄4″, universal joint 3⁄8″, ratchet handle g1⁄4″ and 3⁄8″, squaredrive 1⁄4″-g1⁄4″ and 31 bits.Supplied in plastic case with click lock and folding handle. Tool mat in the case’s lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Teng Tools. Series Mecca Rosso. Registered design. Industrial quality. Contains 10 1⁄4″sockets with 6-point openings and 16 1⁄2″ sockets with 12-point openings, bit socket 1⁄4″-g,adaptor drive 3⁄8″-1⁄2″, universal joint 1⁄2″, extension bars 100 mm (1⁄4″), 125 and 250 mm (1⁄2″),swivel socket 1⁄2″, bits/socket-swivel wrench, fibre reinforced ratchet handle 1⁄4″ and 1⁄2″ withlever for reversible action, three hexagon keys and 33 bits.Supplied in plastic case with click lock and folding handle. Tool mat in the case’s lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12198 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No MR064No. of pieces. . . . . . . . . . . . . . . . . . . . . . . ea. 64Socket dim., short (1⁄4″) . . . . . . . . . . . . . . mm 4 5 5.5 6 7 8

10 11 12 13Socket dim., deep (1⁄4″) . . . . . . . . . . . . . . mm 6 7 8 10 12 13Socket dim., short (3⁄8″) . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 18 19 21 22Socket dim., deep (3⁄8″) . . . . . . . . . . . . . . mm 8 10 12 13 17 19Spark plug socket (3⁄8″) . . . . . . . . . . . . . . mm 16 21Bits for slotted heads. . . . . . . . . . . . . . . . mm 0.6x4 0.8x5.5Bits for Phillips heads . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads . . . . . . . . . . . . . . No 1 2Bits for TX-heads. . . . . . . . . . . . . . . . . . . No TX10 TX15 TX20Bits for hex holes . . . . . . . . . . . . . . . . . . . mm 5 6Hex keys . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.34

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5908 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No MR3869No. of pieces . . . . . . . . . . . . . . . . . . . . . . ea. 69Socket dimensions (1⁄4″). . . . . . . . . . . . . mm 4 5 5.5 6 7

8 10 11 12 13Socket dimensions (3⁄8″). . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 18 19 20 22Bits for slotted heads . . . . . . . . . . . . . . . mm 0.8×4.0 1.2×5.5 1.4×7.0Bits for Phillips-heads. . . . . . . . . . . . . . . No 0 1 2 3Bits for Pozidriv-heads . . . . . . . . . . . . . . No 1 2 3Bits for TX heads. . . . . . . . . . . . . . . . . . . TX 8 10 15 20 25 27 30 40Bits for hex holes. . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8 10Bits for hex holes. . . . . . . . . . . . . . . . . . . inch 1⁄8 9⁄64 5⁄32 3⁄16 7⁄32 1⁄4 3⁄8Hex keys. . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.2

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5917 -0100Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . No MR1272No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . ea. 72Sockets’ dim. 1⁄4″ hex. (10) . . . . . . . . . . . . . mm 4 5 5.5 6 7

8 10 11 12 13Sockets’ dim. 1⁄2″ bihex. (16) . . . . . . . . . . . . mm 10 11 12 13 14 15 16 17

18 19 20 21 22 23 24 27Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . TX 8 10 20 25 27 30 40Bits for XZN screws . . . . . . . . . . . . . . . . . . . M 5 6Bits for slotted heads . . . . . . . . . . . . . . . . . . mm 0.8x4 1.2x5.5 1.4x7Bits for Phillips heads. . . . . . . . . . . . . . . . . . No 0 1 2 3Bits for Pozidriv-heads. . . . . . . . . . . . . . . . . No 1 2 3Bits for hex holes . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8 10Bits for hex holes . . . . . . . . . . . . . . . . . . . . . inch 1⁄8 9⁄64 5⁄32 3⁄16 7⁄32 1⁄4 3⁄8Hex keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 4.1

No 12198

No 5908

No 5917

Mecca Rosso

Teng Tools

67


Combined Drive Sets 1⁄4″, 3⁄8 ″ and 1⁄2″Mecca Rosso Socket SetsTeng Tools. Series Mecca Rosso. Set containing 111 parts - with 1⁄4″, 3⁄8″ and 1⁄2″ regularsocskets, 3⁄8″ ldeep sockets, socket accessories with 1⁄4″, 3⁄8″ and 1⁄2″ ❒-drive, 1⁄4″ and 5⁄16″screwdriver bits. Supplied in red plastic case with click lock and folding handle. Tool mat in the case’s lid. Theunderside of the case is fitted with rubber feet.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15168 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR111No of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 111Hexagon sockets 1⁄4″ ❒-drive . . . . . . . . . . . . . . mm 4 5 6 7 8 10 12Hexagon sockets 1⁄4″ ❒-drive . . . . . . . . . . . . . . inch 3⁄16 7⁄32 1⁄4 9⁄32 3⁄8 7⁄16

Hexagon sockets 3⁄8″ ❒-drive . . . . . . . . . . . . . . mm 8 9 10 12 13 14 15 16 17Hexagon sockets 3⁄8″ ❒-drive . . . . . . . . . . . . . . inch 3⁄8 7⁄16 1⁄2 9⁄16 11⁄16 3⁄4 13⁄16 7⁄8Hexagon sockets, deep 3⁄8″ ❒-drive. . . . . . . . . mm 8 9 10 12 13 14 15 16 17Hexagon sockets, deep 3⁄8″ ❒-drive. . . . . . . . . inch 3⁄8 7⁄16 1⁄2 9⁄16 11⁄16 3⁄4 13⁄16 7⁄8Hexagon sockets 1⁄2″ ❒-drive . . . . . . . . . . . . . . mm 17 24 27 32Hexagon sockets 1⁄2″ ❒-drive . . . . . . . . . . . . . . inch 11⁄16 3⁄4 13⁄16 7⁄8 1 13⁄16

Spark plut sockets 3⁄8″ ❒-drive . . . . . . . . . . . . . mm 16 21Bit holder for 1⁄4″g bits . . . . . . . . . . . . . . . . . . . ❒ 1⁄4″ och 3⁄8″Bit holder for 5⁄16″g bits . . . . . . . . . . . . . . . . . . ❒ 1⁄2″Flexible extension 150 mm . . . . . . . . . . . . . . . . ❒ 1⁄4″Extension bars 50 and 100 mm . . . . . . . . . . . . ❒ 1⁄4″Extension bars 75 and 150 mm . . . . . . . . . . . . ❒ 3⁄8″Extension bars 63 and 250 mm . . . . . . . . . . . . ❒ 1⁄2″Spinner handles . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄4″ and 3⁄8″Universal joints . . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄4″ and 3⁄8″Step up adaptors . . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄4″-3⁄8″ och 3⁄8″-1⁄2″Reducing adaptors . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄2″-3⁄8″T-handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄4″Ratchets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ❒ 1⁄4″ 3⁄8″ 1⁄2″Bits 1⁄4″ for int. hex. holes . . . . . . . . . . . . . . . . . mm 3 4 5 6 7Bits 1⁄4″ for int. hex holes . . . . . . . . . . . . . . . . . . inch 1⁄8 9⁄64 5⁄32 3⁄16 1⁄4 5⁄16

Bits 1⁄4″ for TX heads . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25 30 40Bits for 1⁄4″ slotted heads . . . . . . . . . . . . . . . . . . mm 4.5 5.0 7.0Bits 1⁄4″ for PH heads . . . . . . . . . . . . . . . . . . . . . No 1 2 3Bits 1⁄4″ for PZ heads . . . . . . . . . . . . . . . . . . . . . No 1 2 3Bits 5⁄16″ for TX heads. . . . . . . . . . . . . . . . . . . . . TX 45 50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 9.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 2

No 15168

Mecca Rosso

Teng

Too

ls

68


Mecca Rosso Socket Sets 3⁄4″ DriveTeng Tools. Series Mecca Rosso. Contains 14 sockets of chrome vanadium steel with6-point openings. In addition, includes T-handle 450 mm, two extension bars 200 and 400mm as well as a ratchet handle 500 mm.Supplied in sheet metal case.

Teng Tools. Contains sockets of chrome vanadium steel with 12 point openings. In addi-tion, includes T-handle 560 mm with drive, two extension bars 200 and 400 mm as well asratchet handle 550 mm. Satin finish.Supplied in metal case.

Teng Tools. Series Mecca Rosso. Contains 23 pieces. Consisting of ratchet handle,extension bars - length 100, 200 and 400 mm, T-handle, 8 6 point sockets in millimetre sizes,9 12 point sockets in inch sizes.

Mecca Rosso Socket Set 1″ Drive

Teng Tools. Series Mecca Rosso. Contains 23 pieces. Consisting of ratchet handle,extension bars - length 100, 200 and 400 mm with safety locking system fixing the socket tothe bar, T-handle, 8 6 point sockets in millimetre sizes, 9 12 point sockets in inch sizes.Supplied inplastic case with click lock and folding handle. TYool mat in the lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Art. no . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7353 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No M1115MMNo. of pieces. . . . . . . . . . . . . . . . . . . . . . . . ea. 15Sockets’ dim. (10) . . . . . . . . . . . . . . . . . . . mm 36 41 46 50 55

60 65 70 75 80Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 28

Art. no . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5251 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MR3418-6Measurement system . . . . . . . . . . . . . . . . . . . MillimetreNo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 18Sockets’ dim.. . . . . . . . . . . . . . . . . . . . . . . . . . . mm 19 21 22 24 27

30 32 3 34 3638 41 46 50

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 13

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11663 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . No MR 3423No. of pieces. . . . . . . . . . . . . . . . . . . . ea. 23Sockets’ dim. (8) . . . . . . . . . . . . . . . . mm 19 21 24 27

32 34 36 50Sockets’ dim. (9) . . . . . . . . . . . . . . . . inch 7⁄8 1 11⁄8 13⁄16 15⁄16

11⁄2 15⁄8 113⁄16 2Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 15.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15219 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No MR3423SNumber of parts . . . . . . . . . . . . . . . . . . . . ea. 23Socket sizes (8) . . . . . . . . . . . . . . . . . . . . mm 19 21 24 27

32 34 36 50Socsket sizes (9) . . . . . . . . . . . . . . . . . . . inch 7⁄8 1 11⁄8 13⁄16 15⁄16

11⁄2 15⁄8 113⁄16 2Size of case LxWxH. . . . . . . . . . . . . . . . . mm 584x310x110Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 12Nr 15219

No 11663

No 5251

No 7353

Square Drives

Teng Tools

69


RatchesTeng Tools. Set with 3 ratchet handles. The ratchet handles have 72 teeth, are adjustableusing a reversing lever and equipped with a button for locking, removing/switching sockets.Matt chromium plated. Two component handle.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. With fixed drive. Patented fibre reinforced ratchet handles. Light and strong.Adjustable with lever for reversible action. Locking button, and quick release for switchingsockets.

Teng Tools. With fixed drive. Reversible. 8 teeth gripping simultaneously give 30% greaterpulling power. Locking button, and quick release for switching sockets.

Teng Tools. With fixed drive. Chrome vanadium steel. With reversing lever. Lockingbutton, and quick release for switching sockets. Satin finish. Two component handle.

Art. no. . . . . . . . . . . 11739 -0104 -0203 -0302Teng Tools . . . . . . . No 1400-72 3800-72 1200-72Drive ❒ . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2No. of teeth . . . . . . . 72 72 72Length . . . . . . . . . . . mm 142 211 257Pack. . . . . . . . . . . . . qty 10 10 10

Repair kit . . . . . . . . 11739 - -1409 -1508Teng Tools . . . . . . . No - 3800-72RK 1200-72RKPack. . . . . . . . . . . . . sts - 10 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12821 -0101Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . No TT7203Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4, 3⁄8, 1⁄2Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 142, 211, 257Case size LxWxH . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

No 0303

No 7429

No 11739

No 12821

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0303 -0103 -0202 -0301Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No PT1400 PT3800 PT1200Drive ❒. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2No. of teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 45 54 54Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 140 200 250Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Repair set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0303 -1002 -1101 -1200Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No PT1400RK PT3800RK PT1200RKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Repair set (box model) . . . . . . . . . . . . . . . . . . 7372 -2050 -2159 -2209Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 1400NRK 3800NRK 1200NRKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7429 -0107 -0206 -0305Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 1400FRP 3800FRP 1200FRPDrive ❒. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2No. of teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 45 45 45Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 150 200 255Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5 5 5

Repair set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7429 -1006 -1105 -1204Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 1400FRPK 3800FRPK 1200FRPKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10 10 10

Repair set (box model) . . . . . . . . . . . . . . . . . . 7372 -2050 -2159 -2209Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 1400NRK 3800NRK 1200NRKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10 10 10

Square Drives

Teng

Too

ls

70


Ratches

Teng Tools. Long ratchet handle with 60 teeth. Equipped with lever forchanging between right and left-hand action and button for locking,loosening/switching sockets. Two component handle. Matt chromiumplated.

Teng Tools. Chrome vanadium steel. Adjustable with lever for rever-sible action.No 1400-1200 with locking button, as well as quick and easy switching ofsockets. Rubber grip.No M3400 with quick switching button - M1100 without quick switchingbutton. Knurled handle. Satin finish.

Teng Tools. Industrial quality. Knob for changing between right andleft-hand action and button for locking, loosening/switching sockets.No 14382. Black handle.No 14381. Knurled handle and removable head.

Teng Tools. Separate ratchet head with fixed drive and flip reverse lever. Used togetherwith extension bar M110020.

Art. no.. . . . . . . . . . . . . . . . . . . . . 14383 -0107Teng Tools. . . . . . . . . . . . . . . . . . No 1200LDrive❒ . . . . . . . . . . . . . . . . . . . . . inch 1⁄2No. of teeth . . . . . . . . . . . . . . . . . ea. 60Length . . . . . . . . . . . . . . . . . . . . . mm 432Weight . . . . . . . . . . . . . . . . . . . . . kg 0.8Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . 14382-0108 14381-0109Teng Tools . . . . . . No M3400-72 M1100-72Drive❒. . . . . . . . . . inch 3⁄4 1No. of teeth. . . . . . ea. 72 72Length. . . . . . . . . . mm 505 800Weight. . . . . . . . . . kg 2.00 4.06Pack. . . . . . . . . . . . qty 3 2

Repair set . . . . . . 14382-1007 14381-1008Teng Tools . . . . . . No M3400-72RK M1100-72RK

Ratchet head . . . . . . . . . . . . . . . . . . . . . . . 11684 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No M110010Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.74

Extension bar. . . . . . . . . . . . . . . . . . . . . . . 11684 -0208Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No M110020Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 550Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 4

No 7372/1400-1200

No 11684/Ratched head

No 14382-0108

No 14383

No 7372/M3400-3

No 11684/Extension bar

No 14381-0109

No 7372/M1100

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 7372 -0104 -0203 -0302 -0401 -0500Teng Tools . . . . . . . . . . . . . . . . . . . . No 1400 3800 1200 M3400-3 M1100Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2 3⁄4 1Length . . . . . . . . . . . . . . . . . . . . . . . . mm 140 200 250 500 660Pack. . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 3 3

Repair set . . . . . . . . . . . . . . . . . . . . 7372 -1003 -1102 -1201 -1300 -1409Teng Tools . . . . . . . . . . . . . . . . . . . . No 1400RK 3800RK 1200RK 3400-3RK 1100RKPack. . . . . . . . . . . . . . . . . . . . . . . . . . set 10 10 10 1 1

Repair set (box model). . . . . . . . . 7372 -2050 -2159 -2209 -2308 -2407Teng Tools . . . . . . . . . . . . . . . . . . . . No 1400NRK 3800NRK 1200NRK M3400-3RK

(40 teeth)M1100RK(24 teeth)

Pack. . . . . . . . . . . . . . . . . . . . . . . . . . set 10 10 10 1 1

Square Drives

Teng Tools

71


Extension barTeng Tools. Extension bar with through holes for applications together with ratchethandle no 14412 and sockets no 14411. Specially designed for tightening nuts on stud bolts.Satin finish.

Teng Tools. Ratchet for push through sockets. Internal 19 mm hexagonfittin. Flip reverse action. Two component handle with non slip sections.Satin finsih. To be used together with push through sockets no. 14411.

Teng Tools. Chromevanadium steel. Mini palm ratchet - ideal for usewhere space is very restricted.

Sockets

Teng Tools. 1⁄4″ ratcheting bit driver and 8 mm 12 point ring spanner.Hardened. Manufactured of chrome vanadium steel. Satin finish.

Teng Tools. Sockets with through hole. External hexagonal drive 19 mm for applicationstogether with ratchet handle 14413-0101. The sockets are especially designed for tigh-tening nuts on stud bolts. Matt chromium plated.

Teng Tools. Swivel. With fixed drive. Reversible and with lever for quickrelease and switching sockets. Satin finish. Two component handle.

Ratches

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11834 -0108Teng Tools . . . . . . . . . . . . . . . . . . . No 1400BWith bit drive . . . . . . . . . . . . . . . . . . inch 1⁄4″Ring spanner. . . . . . . . . . . . . . . . . . mm 8Length . . . . . . . . . . . . . . . . . . . . . . . mm 90Pack. . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . 11806 -0102Teng Tools . . . . . . . . . . . . . . . . . . No 1200FDrive ❒ . . . . . . . . . . . . . . . . . . . . . inch 1⁄2No. of teeth . . . . . . . . . . . . . . . . . . ea. 60Length . . . . . . . . . . . . . . . . . . . . . . mm 432Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 5

Spare part set . . . . . . . . . . . . . . . 11806 -0201Teng Tools . . . . . . . . . . . . . . . . . . No 1200FRKPack. . . . . . . . . . . . . . . . . . . . . . . . sts 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14413 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No M800023-CConnection int. hexagon . . . . . . . . . . . . . . . . . . . . . mm 19Connection ext. hexagon. . . . . . . . . . . . . . . . . . . . . mm 19Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 75Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . 13209 -0101Teng Tools. . . . . . . . . . . . . . . . . . . . . . No 1400MDrive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4Number of teeth . . . . . . . . . . . . . . . . . 45Height . . . . . . . . . . . . . . . . . . . . . . . . . . mm 29Length . . . . . . . . . . . . . . . . . . . . . . . . . mm 76Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14412 -0102Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . No M80010Internal hexagon fitting . . . . . . . . . . . . . . . mm 19Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 220Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

No 14412

No 13209

No 14413

No 11834

No 11806

No 14411

Art. no. . . . . . . . . 14411 -0103 -0202 -0301 -0400 -0509Teng Tools . . . . . No M800510-C M800511-C M800512-C M800513-C M800514-CSize . . . . . . . . . . . mm 10 11 12 13 14

Art. no. . . . . . . . . 14411 -0608 -0707 -0806 -0905 -1002Teng Tools . . . . . No M800515-C M800516-C M800517-C M800518-C M800519-CSize . . . . . . . . . . . mm 15 16 17 18 19

Square Drives

Teng

Too

ls

72


Universal Joints

All Teng Tools ratchets should be cleaned and maintained on a regular basis to reduce wearand to prolong life. However, with all tools involving moving parts some wear will occur withuse. Teng Tools offer a full range of complete repair kits and spare parts for their ratchets -full details can be found on the Teng Tools website or are available from your local TengTools stockist.

Teng Tools. The drive is designed so that the socket swivels for improved access.Chrome vanadium steel. Satin finish.

Teng Tools. Universal joint. Chrome vanadium steel. Satin finish.

Teng Tools. Chrome vanadium steel. Satin finish.Type S with safety locking mechanism.

Teng Tools. Chrome vanadium steel. Satin finish.

Extension bars

All of the Teng Tools sockets and accessories are designed and manufactured to meet or exceed the appropiated DIN andISO standards and all carry the Teng Tools brand name to give warranty assurance.

No 7386

No 7411

No 0110

No 0679

Art. no. . . . . . . . . . . . 7411 -0057 -0073 -0107 -0206Teng Tools . . . . . . . . No M140030-C M380030-C M120030-C M340030-CDrive ❒ . . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2 3⁄4Pack. . . . . . . . . . . . . . qty 10 10 10 1

Art. no. . . . . . . . 7386 -0108 -0207 -0256 -0306 -0355Teng Tools . . . . No M120020-C M120021 M120023-C M120022-C M120024-CDrive ❒. . . . . . . . inch 1⁄2 1⁄2 1⁄2 1⁄2 1⁄2Length . . . . . . . . mm 60 125 150 250 500Pack. . . . . . . . . . qty 10 10 10 10 10

Art. no. . . . . . . . 7386 -0405 -0454 -0504 -0553 -0603Teng Tools . . . . No M340020-C M340020S-C M340021-C M340021S-C M340022-CDrive ❒. . . . . . . . inch 3⁄4 3⁄4 3⁄4 3⁄4 3⁄4Length . . . . . . . . mm 100 100 200 200 400Pack. . . . . . . . . . qty 1 1 1 1 1

Art. no. . . . . . . . 7386 -0652 -0702 -0801Teng Tools . . . . No M340022S-C M110040 M110050Drive ❒. . . . . . . . inch 3⁄4 1 1Length . . . . . . . . mm 400 300 400Pack. . . . . . . . . . qty 1 1 5

Art. no. . . . . . . . . 0679 -0109 -0158 -0208 -0307 -0356Teng Tools . . . . . No M140020-C M140023-C M140021-C M140022-C M140024-CDrive ❒ . . . . . . . . inch 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4Length . . . . . . . . . mm 50 75 100 150 300Pack. . . . . . . . . . . qty 10 10 10 10 10

Art. no. . . . . . . . . 0679 -0406 -0455 -0505 -0604 -0703Teng Tools . . . . . No M380020-C M380023-C M380021-C M380022-C M380024-CDrive ❒ . . . . . . . . inch 3⁄8 3⁄8 3⁄8 3⁄8 3⁄8Length . . . . . . . . . mm 75 125 150 250 500Pack. . . . . . . . . . . qty 10 10 10 10 10

Art. no. . . . . . . . . 0110 -1708 -1807 -1906 -2003 -2102 -2201Teng Tools . . . . . No M 380020 M 380021 M 380022 M 120020 M 120021 M 120022Drive ❒ . . . . . . . . inch 3⁄8 3⁄8 3⁄8 1⁄2 1⁄2 1⁄2Length. . . . . . . . . mm 75 150 250 75 150 250Pack. . . . . . . . . . . qty 10 10 10 10 10 10

Square Drives

Teng Tools

73


Teng Tools. Chrome vanadium steel. Satin finish.Type S with safety locking mechanism.

Sliding T-bars

Teng Tools. With 10 or 12 mm g drive for Teng Tools bits.

Teng Tools. With 6-point opening for1⁄4″ or 5⁄16″ screwdriver bits. Chrome vanadium steel.Satin finish.

Coupler Adaptors

Teng Tools. Adaptor with hex drive for mounting in a drill chuck and with external ❒-drivefor sockets at the other end.

Hexagon Adaptors

Teng Tools. Chrome vanadium steel. No M380035-C and M120036-C with hole for turningusing an extension bar. Satin finish.

Reducing Adaptors

Step Up Adaptors

Teng Tools. Chrome vanadium steel. No M380036-C and M110030 with hole for turningusing an extension bar. Satin finish.

Art. no. . . . . . . 3587 -0104 -0153 -0179 -0203Teng Tools . . No M140050-C M380050-C M120050-C M340050-CDrive ❒ . . . . . . inch 1⁄4 3⁄8 1⁄2 3⁄4Length . . . . . . . mm 105 170 243 450Pack. . . . . . . . . qty 10 10 10 1

Art. no. . . . . . . 3587 -0302Teng Tools . . No M340050S-CDrive ❒ . . . . . . inch 3⁄4Length . . . . . . . mm 450Pack. . . . . . . . . qty 1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3564 -0101 -0200 -0309Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No M380035-C M120036-C M340086-CDrive int. ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8 1⁄2 3⁄4Drive ext. ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2With hole for turning using an extension bar yes yes noLength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 30 40 40Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 1

Art. no. . . . . . . . . . . . . . . . . . . . . . 11711 -0106 -0205Teng Tools . . . . . . . . . . . . . . . . . . No M140037 M380037Hexagonal drive . . . . . . . . . . . . . . ginch 1⁄4 1⁄4Square drive . . . . . . . . . . . . . . . . . ❒-inch 1⁄4 3⁄8Quantity . . . . . . . . . . . . . . . . . . . . . qty 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . 10167 -0057 -0107 -0206Teng Tools . . . . . . . . . . . . . . . . . No M380061 M120061 M120062Drive ❒ . . . . . . . . . . . . . . . . . . . . inch 3⁄8 1⁄2 1⁄2For bits med g drive. . . . . . . . . mm 10 10 12Length. . . . . . . . . . . . . . . . . . . . . mm 28 38 38Pack. . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Art. no.. . . . . . . . . . 3563-0102 3581-0100 3581-0209Teng Tools. . . . . . . No M140060 M380060 M120060Drive ❒ . . . . . . . . . . tum 1⁄4 3⁄8 1⁄2For bits g . . . . . . . inch 1⁄4 1⁄4 5⁄16

Length . . . . . . . . . . mm 25 25 25Pack. . . . . . . . . . . . qty 10 10 10

No 3565

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3565 -0050 -0100 -0209 -0308 -0407Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No M140036-C M380036-C M120037-C M340085-C M110030Drive int. ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4 3⁄8 1⁄2 3⁄4 1Drive ext. ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8 1⁄2 3⁄4 1 1With hole for turning using an extension bar . . . no yes no no yesLength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 25 40 39.5 62 82Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 1 1

No 3564

No 3587

No 3563-3581

No 11711

No 10167

Square Drives

Teng

Too

ls

74


Speed BracesTeng Tools. Chrome vanadium steel. Satin finish. Plastic handle.

Teng Tools. Chrome vanadium steel. Satin finish. Curved model Two component handle.

Teng Tools. Made of chrome vanadium steel. Matt chromium plated. Two componenthandle.Type S with safety mechanism that secures the socket.

DriversTeng Tools. Flexible screwdriver handle. With 1⁄4″ square drive for bit sockets and standardsockets. Black plastic handle with external hexagonal grip for tightening with a spanner.Only for right hand action (permitted load 5 Nm).

Flex Handles

Teng Tools. Chrome vanadium steel. With ❒-drive for sockets and socket tools. Handlepart has internal ❒-drive for connection to , e.g. a T-handle.

Teng Tools. Set with 10 metric bi-hexagon sockets with 1⁄2″-❒-drive and a swivel handle.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Socket Set with Flex Handle

Teng Tools. Chrome vanadium steel. With 3⁄8″ ❒-drive for sockets and socket tools. Twopart plastic handle. Handle part has internal 3⁄8″ ❒-drive for connection to, e.g. a T-handle.

Art. no. . . . . . . . . . . . . . . . . . . . . . 15280 -0108Teng Tools . . . . . . . . . . . . . . . . . . No 380,010A-CDrive❒ . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8Length . . . . . . . . . . . . . . . . . . . . . . mm 250Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12209 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT1211Sockets’ dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10 11 12 13 14

15 16 17 18 19 Swivel handle with 1⁄2″-❒-drive, length . . . . . . . . . . . . . . mm 250Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 0305 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No PT3810RDrive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8Total length . . . . . . . . . . . . . . . . . . . . . . mm 250Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 3486 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No M140015-CDrive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4Overall length . . . . . . . . . . . . . . . . . . . . . mm 150Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . 11204 -0100 -0209Teng Tools . . . . . . . . . . No M380011-C M120011-CDrive ❒ . . . . . . . . . . . . . inch 3⁄8 1⁄2Length . . . . . . . . . . . . . . mm 380 420Pack. . . . . . . . . . . . . . . . qty 10 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0018 -0109Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . No MD514Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4Total length . . . . . . . . . . . . . . . . . . . . . . . . . mm 260Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

No 7398/M120010

No 12209

No 0018

No 11204

No 3486

No 0305

No 15280

No 7398/1201

Art. no. . . . . . . . . . . . . . . . . . . . . 7398 -0104 -0203 -0252 -0302 -0401Teng Tools . . . . . . . . . . . . . . . . . No M120010-C 1201 1201A M340070-C M340070S-CDrive ❒ . . . . . . . . . . . . . . . . . . . . inch 1⁄2 1⁄2 1⁄2 3⁄4 3⁄4Length . . . . . . . . . . . . . . . . . . . . . mm 250 425 600 475 475Pack. . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 5 5

Spare square drive . . . . . . . . . 7398 - -1003 - - -Pack. . . . . . . . . . . . . . . . . . . . . . . qty - 10 - - -

Square Drives

Teng Tools

75


Spark Plug Sockets3⁄8″ DriveTeng Tools. Chrome vanadium steel. With 6 point opening. With rubber insert. Externalhexagonal grip 24 mm for tightening with a spanner. Satin finish.

Teng Tools. With 6 point openings. Chrome vanadium steel. Satin finish. Length 21.2 mm.According to standard DIN 3124/ISO 2725.

1⁄4″ Drive Sockets

1⁄2″ Drive

Teng Tools. Chrome vanadium steel. With 6 point openings. Satin finish. With rubberinsert. External hexagonal grip 24 mm for tightening with a spanner.

Teng Tools. Swivel head of chrome vanadium steel. Satin finish.

Flex Head

Millimetre series AF seriesTeng Tools M1405-C Teng Tools M1401-C

Art. no Size Pack Art. no Size Size Pack2567 mm qty 6980 AF mm qty-0100 4 10 - - - --0159 4.5 10 - - - --0209 5 10 -0100 3⁄16 4.8 10-0258 5.5 10 -0209 7⁄32 5.6 10-0308 6 10 -0308 1⁄4 6.4 10

-0407 7 10 -0407 9⁄32 7.1 10-0506 8 10 -0506 5⁄16 7.9 10-0605 9 10 -0605 11⁄32 8.7 10-0704 10 10 -0704 3⁄8 9.5 10

-0803 11 10 -0803 7⁄16 11.1 10-0902 12 10 - - - --1009 13 10 -0902 1⁄2 12.7 10

Art. no. . . . . . . . . . 3982 -0105 -0121 -0154Teng Tools . . . . . . No M380040-C M380041-C

FlexibleM380042-C

Size . . . . . . . . . . . . mm 16 16 18Length. . . . . . . . . . mm 64 85 70Pack. . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . 3982 -0204 -0303Teng Tools . . . . . . No M380046-C M380047-C

FlexibleSize . . . . . . . . . . . . mm 21 21Length. . . . . . . . . . mm 70 91Pack. . . . . . . . . . . . qty 10 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . 3585 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . No M120080-CDrive ❒ . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Pack.. . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . 6979 -0103 -0202 -0301Teng Tools . . . . . . No M120040-C M120042-C M120046-CSize . . . . . . . . . . . . mm 16 18 21Length. . . . . . . . . . mm 70 70 70Pack. . . . . . . . . . . . qty 10 10 10

No 3585

No 6979

No 3982

No 2567-6980

No 3982/Flexible

Square Drives

Teng

Too

ls

76


Teng Tools. For internal TX heads. The head gives minimal loss of torque transmission.Satin finish.

Teng Tools. For screws with Pozidriv and Supadriv cross heads. For hand tightening. Satinfinish.

Teng Tools. For slotted heads. For hand tightening. Satin finish.

Teng Tools. For screws with Phillips cross heads. For hand tightening. Satin finish.

Teng Tools. Chrome vanadium steel. For external TX heads. The head gives minimal lossof torque transmission. Satin finish.

1⁄4″ Drive SocketsTeng Tools. Deep sockets with 6 point openings. Chrome vanadium steel. Satin finish.Length 49.5 mm. According to standard DIN 3124/ISO 2725.

There are many individual features and benefits on this range, examples include - hip grip sockets for driving on the surfacerather than the corner, extensions and accessories with grub screws for added retention, socket clips in the packaging foruse with Teng Tool clip rails, a choice of 12 point (bi-hex) or 6 point (hex) in the more popular ranges, clip rail sets with all thepopular sockets and socket bits in small sets, and so on.

Art. no. . . . . . . . . . . . . . . . . . . . . 6835 -0107 -0206 -0305Teng Tools . . . . . . . . . . . . . . . . . No M141601-C M141602-C M141603-CFor Pozidriv cross heads. . . . . . No 1 2 3Length . . . . . . . . . . . . . . . . . . . . . mm 25 25 25Pack. . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . 6828 -0106 -0205 -0304Teng Tools . . . . . . . . . . . . . . . . No M141404-C M141455-C M141407-CScrewdr. thickn.xwidth . . . . . . mm 0.8x4 1.2x5.5 1.4x7Length. . . . . . . . . . . . . . . . . . . . mm 25 25 25Pack. . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Millimetre series AF seriesTeng Tools M1406-C Teng Tools M1402-C

Art. no Size Pack Art no. Size Size Pack3562 mm qty 6989 AF mm qty-0038 4 10 - - - --0061 5 10 -0101 3⁄16 4.8 10-0095 5.5 10 -0150 7⁄32 5.6 10-0103 6 10 -0200 1⁄4 6.4 10

-0202 7 10 -0259 9⁄32 7.1 10-0301 8 10 -0309 5⁄16 7.9 10-0350 9 10 -0358 11⁄32 8.7 10

-0400 10 10 -0408 3⁄8 9.5 10-0459 11 10 -0507 7⁄16 11.1 10-0509 12 10 -0606 1⁄2 12.7 10-0608 13 10 - - - -

Art. no. . . . . . . . . . . . . . . . 6826 -0058 -0108 -0207 -0306Teng Tools . . . . . . . . . . . . No M141300-C M141301-C M141302-C M141303-CFor Phillips cross heads . No 0 1 2 3Length . . . . . . . . . . . . . . . . mm 25 25 25 25Pack. . . . . . . . . . . . . . . . . . qty 10 10 10 10

Art. no. . . . . . . . . . . . . . . 10185 -0105 -0204 -0303 -0402 -0501Teng Tools . . . . . . . . . . . M1407- 04 05 06 07 08Max. head width . . . . . . . mm 3.86 4.75 5.74 6.22 7.52For screw . . . . . . . . . . . . M 3 4 5 6 6-7Length . . . . . . . . . . . . . . . mm 23.1 24.8 24.8 24.8 24.8Pack. . . . . . . . . . . . . . . . . qty 10 10 10 10 10

No 11206

No 6828

No 10185

No 6835

No 6826

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . 11206 -0108 -0207 -0306 -0405 -0504 -0603 -0702Teng Tools M1412T-C . . . . . . . . . . . TX 10 TX 15 TX 20 TX 25 TX 27 TX 30 TX 40Max. size . . . . . . . . . . . . . . . . . . . . . . mm 2.74 3.27 3.86 4.43 4.99 5.52 6.65For screw . . . . . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 4.5-6 6-7 7-8Length . . . . . . . . . . . . . . . . . . . . . . . . mm 32 32 32 32 32 32 32Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10

No 3562-6989

Square Drives

Teng Tools

77


3⁄8″ Drive SocketsTeng Tools. With 6 point opening. Chrome vanadium steel. Satin finish. According tostandard DIN 3124/ISO 2725.

Teng Tools. Long sockets with hexagon openings. Chrome vanadium steel. Satin finish.According to standard DIN 3124/ISO 2725.

Teng Tools. Made of chrome vanadium steel. For external TX heads. The head givesminimal loss of torque transmission. Satin finish.

Metric series AF seriesTeng Tools M3805-C Teng Tools M3801-C

Art. no. Socket Pack. Art. no. Size Size Pack.2621 mm qty 6995 AF mm qty-0054 7 10 - - - --0104 8 10 -0103 5⁄16 7.9 10-0203 9 10 - - - --0302 10 10 -0202 3⁄8 9.5 10

-0401 11 10 -0301 7⁄16 11.1 10-0500 12 10 - - - --0609 13 10 -0400 1⁄2 12.7 10-0708 14 10 -0509 9⁄16 14.3 10

-0807 15 10 - - - --0906 16 10 -0608 5⁄8 14.3 10-1003 17 10 -0707 11⁄16 14.3 10-1102 18 10 - - - -

-1201 19 10 -0806 3⁄4 19.1 10-1300 20 10 - - - --1409 21 10 -0905 13⁄16 20.6 10-1508 22 10 -1002 7⁄8 22.2 10

Millimetre-series American-seriesTeng Tools M3806-C Teng Tools M3802-C

Art. no. Size Pack. Art. no. Size Size Pack.grip grip grip

3586 mm qty 6997 AF mm qty-0055 7 10 - - - --0105 8 10 - - - --0154 9 10 - - - --0204 10 10 -0101 3⁄8 9.5 10

-0253 11 10 -0200 7⁄16 11.1 10-0303 12 10 - - - --0402 13 10 -0309 1⁄2 12.7 10-0451 14 10 -0408 9⁄16 14.3 10

-0477 15 10 - - - --0493 16 10 -0507 5⁄8 15.9 10-0501 17 10 -0606 11⁄16 17.5 10-0550 18 10 - - - -

-0600 19 10 -0705 3⁄4 19.1 10-0709 20 10 -0804 13⁄16 20.6 10-0808 21 10 - - - --0907 22 10 -0903 7⁄8 22.2 10

Art. no. . . . 10169 -0105 -0204 -0303 -0402 -0501Teng Tools No M380710-C M380712-C M380714-C M380716-C M380718-CTX. . . . . . . . No E 10 E 12 E 14 E16 E 18For screw. . M 8 10 12 12 14Length . . . . mm 28 28 28 28 28Pack. . . . . . qty 10 10 10 10 10

No 2621-6995

No 3586-6997

No 10169

Square Drives

Teng

Too

ls

78


3⁄8″ Drive SocketsTeng Tools. Short sockets for internal hex holes. For hand tightening. Chrome vanadiumsteel. Satin finish.

Teng Tools. Chrome vanadium steel. For internal TX heads. The head gives minimal lossof torque transmission. For hand tightening. Satin finish.

Teng Tools. Chrome vanadium steel. For internal TX heads (also for tamper proof screws).The head gives minimal loss of torque transmission. For hand tightening. Satin finish.

Metric series AF seriesTeng Tools M3815-C Teng Tools M3801-C

Art. no. Size Pack. Art. no. Size Size Pack.10207 mm qty 11482 AF mm qty

- - - -0103 3⁄32 2.4 10-0109 3 10 -0202 1⁄8 3.2 10-0208 4 10 -0301 5⁄32 4.0 10-0307 5 10 -0400 3⁄16 4.8 10

-0406 5.5 10 -0509 7⁄32 5.6 10-0505 6 10 -0608 1⁄4 6.4 10-0604 7 10 - - - -

-0703 8 10 -0707 5⁄16 7.9 10-0802 10 10 -0806 3⁄8 9.5 10-0901 12 10 - - - -

No 10208

No 10207

No 10209

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10208 -0108 -0207 -0306 -0405 -0504Teng Tools M3812T-C. . . . . . . . . . . . . . . . . . No TX 10 TX 15 TX 20 TX 25 TX 27Max. head width . . . . . . . . . . . . . . . . . . . . . . . mm 2.74 3.27 3.86 4.43 4.43For screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 4.5-5Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 49.5 49.5 49.5 49.5 49.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10208 -0603 -0702 -0801 -0900Teng Tools M3812T-C. . . . . . . . . . . . . . . . . . No TX 30 TX 40 TX 45 TX 50Max. head width . . . . . . . . . . . . . . . . . . . . . . . mm 5.52 6.65 7.82 8.83For screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 6-7 7-8 8-10 10Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 49.5 49.5 49.5 49.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 10209 -0107 -0206 -0305 -0404 -0503Teng Tools M3812-C . . . . . . . . . . . . . No TPX 10 TPX 15 TPX 20 TPX 25 TPX 27Max. head width. . . . . . . . . . . . . . . . . . mm 2.74 3.27 3.86 4.43 4.43For screw . . . . . . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 4.5-5Length . . . . . . . . . . . . . . . . . . . . . . . . . . mm 49.5 49.5 49.5 49.5 49.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 10209 -0602 -0701 -0800 -0909Teng Tools M3812-C . . . . . . . . . . . . . No TPX 30 TPX 40 TPX 45 TPX 50Max. head width. . . . . . . . . . . . . . . . . . mm 5.52 6.65 7.82 8.83For screw . . . . . . . . . . . . . . . . . . . . . . . M 6-7 7-8 8-10 10Length . . . . . . . . . . . . . . . . . . . . . . . . . . mm 49.5 49.5 49.5 49.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10

Square Drives

Teng Tools

79



All Teng Tools individual Mecca Rosso finish sockets and accessories are now availablecomplete with PP card and socket clip for use with the aluminium clip rail systems - satinfinish sockets also feature the Teng Tool hip grip system for added torque in accordancewith AS954.


Teng Tools. With 6 point and 12 point openings. Chrome vanadiumsteel. Satin finish. According to standard DIN 3124/ISO 2725.

TypicallyTeng

No 7431/6-point No 7431/12-point.

Size 6 piont 12 point 12 pointMillimetre series Millimetre series AF series

Teng Tools M1205-6-C Teng Tools M1205-C Teng Tools M1201-CArt. no Pack Art. no Pack Size Size Art. no Pack

mm 7431 qty 7431 qty AF mm 7431 qty8 - - -0038 10 - - - -9 - - -0061 10 - - - -

10 -3008 10 -0103 10 3⁄8 9.5 -5508 1011 -3107 10 -0202 10 7⁄16 11.1 -5607 10

12 -3206 10 -0301 10 - - - -13 -3305 10 -0400 10 1⁄2 12.7 -5706 1014 -3404 10 -0509 10 9⁄16 14.3 -5805 1015 -3503 10 -0608 10 - - - -

16 -3602 10 -0707 10 5⁄8 15.9 -6001 1017 -3701 10 -0806 10 11⁄16 17.5 -6100 1018 -3800 10 -0905 10 - - - -19 -3909 10 -1002 10 3⁄4 19.1 -6209 10

20 -4006 10 -1101 10 - - - -21 -4105 10 -1200 10 13⁄16 20.6 -6407 1022 -4204 10 -1309 10 7⁄8 22.2 -6506 1023 -4303 10 -1408 10 - - - -

24 -4402 10 -1507 10 15⁄16 23.8 -6605 1025 -4501 10 -1556 10 1 25.4 -6704 1026 -4600 10 -1655 10 - - - -27 -4709 10 -1804 10 11⁄16 27 -6803 10

28 -4808 10 -1754 10 - - - -29 -4907 10 -1853 10 11⁄8 28.6 -6902 1030 -5003 10 -2109 10 13⁄16 30.2 -7009 1032 -5102 10 -2208 10 11⁄4 31.8 -7108 10

33 -2307 10 - - - - - -34 -5201 10 - - - - - -

Square Drives

Teng

Too

ls

80


Teng Tools. Long sockets for hex type bits. For hand tightening. Chrome vanadium steel.Satin finish.

Teng Tools. Series Mecca Rosso. Chrome vanadium steel. For internal TX heads. Thehead gives minimal loss of torque transmission. For hand tightening. Satin finish.

Teng Tools. 1/2″ drive sockets for internal hex holes. For hand tightening. Satin finish.

Teng Tools. Deep - length 79 mm. With 6 point and 12 point openings. Chrome vanadiumsteel. Satin finish. According to standard DIN 3124/ISO 2725.


Size 6 point 12 pointTeng Tools M1206-6-C Teng Tools M1206-C

Art. no. Pack. Art. no. Pack.mm 2573 qty 2573 qty10 - - -0102 1011 - - -0201 1012 - - -0300 1013 -2009 10 -0409 10

14 -2108 10 -0508 1015 -2207 10 -0607 1016 -2306 10 -0706 1017 -2405 10 -0805 10

18 -2504 10 -0904 1019 -2603 10 -1001 1020 - - -1100 1021 - - -1209 10

22 - - -1308 1024 -2702 10 -1407 1027 - - -1506 10

30 - - -1605 1032 - - -1704 1036 - - -1803 10

No 11740

No 6820

No 11745

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11740 -0101 -0200 -0309 -0408 -0507Teng Tools M1212T-C. . . . . . . . . . . . . . . . . . No TX 20 TX 25 TX 27 TX 30 TX 40Max. head width . . . . . . . . . . . . . . . . . . . . . . . mm 3.86 4.43 4.99 5.52 6.65For screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 4-5 4.5-5 4.5-6 6-7 7-8Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 55 55 55 55 55Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11740 -0606 -0705 -0804 -0903Teng Tools M1212T-C. . . . . . . . . . . . . . . . . . No TX 45 TX 50 TX 55 TX 60Max. head width . . . . . . . . . . . . . . . . . . . . . . . mm 7.82 8.83 11.22 13.25For screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 8-10 10 12 14Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 55 55 55 55Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 11745 -0106 -0205 -0304 -0403 -0502 -0601Teng Tools M1225-CSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 5 6 7 8 10 12Total length . . . . . . . . . . . . . . . . . . . . . . mm 100 100 100 100 100 100Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . 6820 -0104 -0203 -0302 -0401 -0500 -0609 -0708 -0807 -0906Teng Tools M1215-CSize . . . . . . . . . . . . . . . . . . . . . mm 5 6 7 8 9 10 12 14 17Total length . . . . . . . . . . . . . . . mm 55 55 55 55 55 55 55 55 55Pack. . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10 10

No 2573

Square Drives

Teng Tools

81


Teng Tools. Long RIL (Ribe) bit sockets. Chrome vanadium. Satin finish.

Teng Tools. For external TX heads. The head gives minimal loss of torque transmission.Chrome vanadium steel. Satin finish.

Teng Tools. Long sockets for internal heads. For hand tightening. The head gives minimalloss of torque transmission. Chrome vanadium steel. Satin finish.

Teng Tools. For internal TX heads (also for tamper proof screws). The head gives minimalloss of torque transmission. For hand tightening. Satin finish.


Art. no. . . . . . 14399 -0109 -0208 -0307 -0406Teng Tools . . No M122704-C M122705-C M122706-C M122708-CFor screw. . . . M 4 5 6 8Length . . . . . . mm 100 100 100 100Pack. . . . . . . . qty 1 1 1 10

Art. no. . . . . . 14399 -0505 -0604 -0703 -0802Teng Tools . . No M122710-C M122711-C M122712-C M122713-CFor screw. . . . M 10 11 12 13Length . . . . . . mm 100 100 100 100Pack. . . . . . . . qty 10 10 10 10

No 11744

No 11207

No 14399

Art. no. . . . . . . . . . . . . . . . . . . 11207 -0107 -0206 -0305 -0404 -0503 -0602 -0701 -0800 -0909Teng Tools M1207-C . . . . . . E 10 E 11 E 12 E 14 E 16 E 18 E 20 E 22 E 24Max. head width. . . . . . . . . . . mm 9.3 9.7 10.8 12.8 14.6 16.6 18.4 20.3 22.16For screw . . . . . . . . . . . . . . . . M 8 - 10 12 12 14 16 10 18-20Length . . . . . . . . . . . . . . . . . . . mm 37.8 37.8 37.8 37.8 37.8 37.8 37.8 37.8 37.8Pack. . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . 11744 -0107 -0206 -0305 -0404 -0503 -0602 -0701 -0800 -0909 -1006Teng Tools M1222T-C. . . . . TX- 20 25 27 30 40 45 50 55 60 70Max. head width . . . . . . . . . . mm 3.86 4.43 4.99 5.52 6.65 7.82 8.83 11.22 13.25 15.55For screw. . . . . . . . . . . . . . . . M 4-5 4.5-5 4.5-6 6-7 7-8 8-10 10 12 14 16Length . . . . . . . . . . . . . . . . . . mm 100 100 100 100 100 100 100 100 100 100Pack. . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10 10 10

No 6825

Art. no. . . . . . . . . . . . . . . . . . . 6825 -0109 -0208 -0307 -0406 -0505 -0604 -0703 -0802 -0901Teng Tools M1212-C. . . . . . . TPX- 20 25 27 30 40 45 50 55 60Size . . . . . . . . . . . . . . . . . . . . . mm 3.86 4.43 4.99 5.52 6.65 7.82 8.83 11.22 13.25For screw. . . . . . . . . . . . . . . . . M 4-5 4.5-5 4.5-6 6-7 7-8 8-10 10 12 14Length . . . . . . . . . . . . . . . . . . . mm 55 55 55 55 55 55 55 55 55Pack. . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10 10

Square Drives

Teng

Too

ls

82


1⁄2″ Drive SocketsTeng Tools. 100 mm long socket bits for ZXN-screws. Chriome vanadium. Satin finish.

Teng Tools. Chrome vanadium steel. With 12 point openings. Satin finish.

1″ Drive Sockets

3⁄4″ Drive SocketsTeng Tools. Chrome vanadium steel. With 6-point and 12-point openings. Satin finish.

Metric series Metric seriesTeng Tools M1105 Teng Tools M1105

Art. no. Socket Art. no. Socket11484 mm 11484 mm-0101 36-0200 41 -0705 60-0309 46 -0804 65

-0903 70-0408 50-0507 55 -1000 75-0606 58 -1109 80

Millimetre-series American-seriesTeng Tools M-C

6-pointTeng Tools M3401-C

12-pointArt. no. Size Length Pack. Art. no. Size Size Length

grip grip grip3620 mm mm qty 11493 AF mm mm-0103 19 48.2 1 -0100 3⁄4 19 50-0202 21 49.5 1 - - - --0301 22 49.5 1 -0209 7⁄8 22.2 51-0400 24 50.8 1 -0308 15⁄16 23.8 51-0459 26 52.0 1 -0407 1 25.4 51

-0509 27 52.0 1 -0506 11⁄16 27 51- - - - -0605 11⁄8 28.6 51

-0608 30 53.2 1 -0704 13⁄16 30 53-0707 32 54.8 1 -0803 11⁄4 31.8 55

-0806 33 55.5 1 - - - -- - - - -0902 15⁄16 33.3 55

-0905 34 55.8 1 -1009 13⁄8 34.9 57

-1002 36 57.2 1 -1108 17⁄16 36.5 57-1101 38 59.5 1 -1207 11⁄2 38 57-1200 41 63.2 16 -1306 15⁄8 41.3 63

- - - - -1405 13⁄4 44.5 65

-1309 46 67.1 1 -1504 13⁄16 46 67- - - - -1603 17⁄8 47.9 69

-1408 50 71.0 1 -1702 2 50.8 71

Art. nr . . . . . . 14400 -0106 -0205 -0304 -0403Teng Tools . . No M122805-C M122806-C M122808-C M122810-CFor screw. . . . M 5 6 8 10Length . . . . . . mm 100 100 100 100

Art. nr . . . . . . 14400 -0502 -0601 -0700Teng Tools . . No M122812-C M122814-C M122816-CFor screw. . . . M 12 14 16Length . . . . . . mm 100 100 100No 14400

No 3620 -11493

No 11484

Wrench Range

Teng Tools

83


Spanner dimensions

Combination Spanner SetsTeng Tools. Chrome vanadium steel. Same dimension at both ends.The 12 point ring head is set at a 15° angle. Polished heads. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools toolboxes and tool trolleys.As an accessory there is a metal ring/carrying handle that keeps thespanners together.

Teng Tools. Sets of 7 combination spanners of chrome vanadium steel.Same dimension at both ends. The 12-point ring head is angled at a 15°angle. Polished heads. Satin finish.Fit in Teng Tools tool boxes or tool trolleys.

Teng Tools. Stubby model. Short spanners made of chrome vanadium steel. Same dimen-sion at both ends. The 12-point ring head is set at a 15° angle. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

In spanners the range includes metric and AF combination spanners (up to 50mm, double ring spanners, double open endedspanners, long mirror polish spanners, ratetting combination spanners with most available in TC trays, and sets as well asindividually. All are manufactured in top grade chrome vanadium steel and carry the Teng Tools logo for added warrantyassurance.

Art. no. . . . . . . . . . . . . 2756-0101 5805-0303Teng Tools . . . . . . . . . No TT1236 TT3592No. of keys . . . . . . . . . 12 8Sizes . . . . . . . . . . . . . . mm/inch 8 9 10 11 12 13

14 15 16 17 18 195⁄16 3⁄8 7⁄16 1⁄29⁄16 5⁄8 11⁄16 3⁄4

Case size LxWxH . . . mm 265x142x50 265x142x50Weight . . . . . . . . . . . . kg 1.7 0.7

Metal ring/handle . . 2756 -0200Teng Tools . . . . . . . . . No 600

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10947 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TT6010MNo. of spanners . . . . . . . . . . . . . . . . . . . . 10Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10 11 12 13 14

15 16 17 18 19Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no.. . . . . . . . . . . . . . . . . . 6891 -0108 -0207Teng Tools. . . . . . . . . . . . . . . No TTX2032 TTX2640No. of spanners . . . . . . . . . . st 7 7Measurement system . . . . . Metric AFSpanner size . . . . . . . . . . . . . 20 21 22 24

27 30 3213⁄16 7⁄8 15⁄16 111⁄16 11⁄8 11⁄4

Weight . . . . . . . . . . . . . . . . . . kg 2.6 2.6

No 10947

No 6891

No 2756-5805

Metal ring

Wrench Range

Teng

Too

ls

84


Teng Tools. Set of 10 Combination spanners of chrome vanadium steel.Same dimension at both ends. The bi-hexagon ring head is set at a 15°angle. Polished heads. Satin finish. Supplied in holder for mounting on awall or tool panel . With carrying handle.

Teng Tools. Rack with 12 combination spanners. Chrome vanadiumsteel. Same dimension at both ends. The bi-hexagon ring head is set at a15° angle. Polished heads. Chromium plated.Supplied on a wall rack.

Teng Tools. Chrome vanadium combination spanner sets. Same dimension atboth ends. The 12 point head is set at a 15° angle. Polished heads. Satin finish. Supplied in a handy tool roll.

Combination Spanner Sets

Art. no. . . . . . . . . . . . . 12824 -0108Teng Tools . . . . . . . . . No WRSP12No. of keys . . . . . . . . . ea. 12Sizes . . . . . . . . . . . . . . mm 8 9 10 11 12 13

14 15 16 17 18 19Pack. . . . . . . . . . . . . . . set 5

6515MMA

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11743 -0108Teng Tools . . . . . . . . . . . . . . . . . . . No 6510ANo. of keys . . . . . . . . . . . . . . . . . . . ea. 10Measurement system . . . . . . . . . . MillimetreSizes . . . . . . . . . . . . . . . . . . . . . . . . mm 8 10 11 12 13

14 15 16 17 19 Weight . . . . . . . . . . . . . . . . . . . . . . . kg 1.1Pack. . . . . . . . . . . . . . . . . . . . . . . . . sts 5

No 15159

6512MMA

No 11743

No 12824

Art. no. . . . . . . . . . . . . . . . . . . . 15159 -0106 -0205 -0304Teng Tools . . . . . . . . . . . . . . . . No. 6507JMM 6512MM 6515MMNumber of keys . . . . . . . . . . . . e.a. 7 12 15Measurement system . . . . . . . Metric Metric MetricSizes . . . . . . . . . . . . . . . . . . . . . mm/inch 33, 34, 36, 38,

41, 46, 5020, 21, 22, 23, 24, 25,26, 27, 28, 29, 30, 32

5.5, 6, 7, 8, 9,10, 11, 12, 13, 14,15, 16, 17, 18, 19

Art. no. . . . . . . . . . . . . . . . . . . . 15159 -0403 -0502 -0601Teng Tools . . . . . . . . . . . . . . . . No. 6507AF 6507JAF 6509AFNumber of keys . . . . . . . . . . . . e.a. 7 7 9Measurement system . . . . . . . AF AF AFSizes . . . . . . . . . . . . . . . . . . . . . mm/inch 13⁄16, 7⁄8, 15⁄16, 1,

11⁄16, 11⁄8, 11⁄415⁄16, 13⁄8, 17⁄16, 11⁄2,

15⁄8, 13⁄4, 17⁄81⁄4, 5⁄16, 3⁄8, 7⁄16, 1⁄2,

9⁄16, 5⁄8, 11⁄16, 3⁄4

6507JMMA

Teng Tools. 3 sets with combination spanners in a special holder which can be connected to each other to one unit. Spannersare made of chrome vanadium. Satin finish. Same dimension at both ends. The 12-point ring end is set at 15° angle.

Art. no. . . . . . . . . . . . . . 15491 -0103 -0202 -0301Teng Tools . . . . . . . . . . No 6515MMA 6512MMA 6507JMMANumper of keys . . . . . . e.a. 15 12 7Sizes . . . . . . . . . . . . . . . mm 5.5 6 7 8 9 10 11 12

13 14 15 16 17 18 1920 21 22 23 24 2526 27 28 29 30 32

33 34 36 38 41 46 50

Wrench Range

Teng Tools

85


Combination Spanner Sets

Teng Tools. Chrome vanadium steel. Long model. Same dimension atboth ends. The 12 point ring head is angled at a 15° angle. Satin finish.Supplied in tool roll.

Combination Spanner Range

Teng Tools. Slim and strong. Chrome vanadium steel. Manu-factured according to DIN 3113A - ISO 3318 - ISO 7738. Samedimension at both ends. The 12 point ring head is set at a 15°angle. Polished heads. Satin finish.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11652 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . No 6059LMPNo. of keys . . . . . . . . . . . . . . . . . . . . 9Measurement system . . . . . . . . . . . MetricSizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 8 10 11 12 13

14 15 17 19Pack. . . . . . . . . . . . . . . . . . . . . . . . . . set 4

No 7267

No 11652

Metric series AF series Length Jaw RingTeng Tools 6005 Teng Tools 6001 thickness height

Art. no. Key Pack. Art. no. Size Size Pack.7267 mm qty 7267 AF mm qty mm mm mm-0052 5.5 10 - - - - 95 3.5 4.1-0102 6 10 -3007 1⁄4 6.3 10 100 4.0 4.7-0201 7 10 - - - - 110 4.0 5.0-0300 8 10 -3106 5⁄16 7.9 10 120 4.5 5.5-0409 9 10 - - - - 130 4.5 5.9

-0508 10 10 -3205 3⁄8 9.5 10 140 5.0 6.5-0607 11 10 -3304 7⁄16 11.1 10 150 5.4 6.9-0706 12 10 - - - - 160 5.5 7.3-0805 13 10 -3403 1⁄2 12.7 10 170 5.9 7.8

-0904 14 5 -3502 9⁄16 14.3 5 180 6.2 8.3-1001 15 5 - - - - 190 6.4 8.6-1100 16 5 -3601 5⁄8 15.9 5 200 6.7 8.9-1209 17 5 - - - - 210 6.9 9.3

-1308 18 5 -3700 11⁄16 17.5 5 220 7.2 9.9-1407 19 5 -3809 3⁄4 19.1 5 230 7.4 10.5-1506 20 5 - - - - 240 7.7 10.9-1605 21 5 -3825 13⁄16 20.6 5 250 8.0 11.3

-1704 22 5 -3833 7⁄8 22.2 5 260 8.2 11.5-1803 23 5 - - - - 270 8.4 11.8-1902 24 5 -3841 15⁄16 23.8 5 280 8.7 12.1-2009 25 5 -3858 1 25.4 5 290 8.9 12.5

-2108 26 5 - - - - 300 9.2 12.8-2207 27 5 -3866 11⁄16 27 5 310 9.4 13.1-2306 28 5 - - - - 320 9.7 13.3-2405 29 5 -3874 11⁄8 28.6 5 330 9.9 13.5

-2504 30 5 - - - - 340 10.1 13.7-2603 32 5 -3882 11⁄4 31.8 5 360 10.4 14.3-2652 33 5 -3908 15⁄16 33.3 5 380 10.7 15.0-2686 34 5 -4005 13⁄8 34.9 5 380 10.7 15.0

-2702 36 5 -4104 17⁄16 36.5 5 410 13.5 19.2-2751 38 5 -4203 11⁄2 38.1 5 430 15.0 20.4-2801 41 5 -4302 15⁄8 41.3 5 460 16.0 21.6

- - - -4401 13⁄4 44.5 5 500 17.0 23.0

-2850 46 5 - - - - 500 17.0 23.0- - - -4500 17⁄8 47.6 5 500 18.0 24.6

-2900 50 5 - - - - 540 18.0 24.6-2926 55 4 - - - - 560 21.5 28.0-2942 58 4 - - - - 600 23.5 30.0-2959 60 4 - - - - 600 23.5 30.0-2967 65 3 - - - - 680 25.0 32.0-2983 70 3 - - - - 680 25.0 32.0

Wrench Range

Teng

Too

ls

86


Teng Tools. Chrome vanadium steel. Combined ring-open-endedspanner and 12-point ring ratchet. The bi-hexagon ring head is set at a15° angle. Same size at both ends.

Ratcheting Combination Spananer Range

Teng Tools. Chrome vanadium steel. Stubby model for accessibility.Same dimension at both ends. Satin finish.

Teng Tools. Chrome vanadium steel. Extra long. Same dimen-sion at both ends. The 12 point ring head is set at a 15° angle.Chrome plated and mirror polished.

Combination Spanner Range

No 11649

No 10972

No 11651

Artnr. . . . . . . . . . . . . . . 11649 -0103 -0202 -0301 -0400 -0509 -0608 -0707 -0806 -0905 -1002 -1101 -1200Teng Tools-no 6059Spanner size . . . . . . . . mm 8 9 10 11 12 13 14 15 16 17 18 19 Length . . . . . . . . . . . . . mm 148 158 168 188 198 208 228 238 246 266 276 285Jaw thickness . . . . . . . mm 4.9 5.0 5.6 5.6 6.3 6.7 7.4 7.6 8.2 8.2 9.0 9.1Ring height . . . . . . . . . mm 5.3 6.2 6.4 7.3 7.9 8.6 9.0 9.9 10.4 10.5 12.4 12.6Pack. . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10 10 10 10 10

Art. no.. . . . . . . . . . . . . . . 11651 -0108 -0207 -0306 -0405 -0504 -0603 -0702 -0801 -0900 -1007Teng Tools 6005M Size. . . . . . . . . . . . . . . . . . mm 10 11 12 13 14 15 16 17 18 19Length . . . . . . . . . . . . . . . mm 95 100 105 110 115 120 125 130 135 140Jaw thickness . . . . . . . . . mm 5.1 5.9 6.6 6.7 7.4 7.5 8.1 8.3 8.7 9.4Ring height. . . . . . . . . . . . mm 7.0 7.8 8.2 8.8 9.1 9.2 9.8 10.3 11.0 11.2Pack.. . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10 10 10

Millimetre-series American-series Length Jaw RingTeng Tools 6005R Teng Tools 6001R thickness height

Art. no. Size Pack. Art. no. Size Size Pack.width width width

10972 mm qty 10972 AF mm qty mm mm mm-0102 8 10 -2009 5⁄16 7.9 10 140 4.6 6.5-0201 9 10 - - - - 150 4.9 6.9-0300 10 10 -2108 3⁄8 9.5 10 159 5.3 7.3-0409 11 10 -2207 7⁄16 11.1 10 165 5.6 7.7-0508 12 10 - - - - 172 6.0 8.2

-0607 13 10 -2306 1⁄2 12.7 10 178 6.4 8.6-0706 14 5 -2405 9⁄16 14.3 5 191 6.8 9.0-0805 15 5 - - - - 200 7.0 9.1-0904 16 5 -2504 5⁄8 15.9 5 208 7.2 9.9-1001 17 5 - - - - 226 7.7 10.3

-1100 18 5 -2603 11⁄16 17.5 5 237 8.2 10.7-1209 19 5 -2702 3⁄4 19.1 5 248 8.8 11.2

- - - -2801 13⁄16 20.6 5 290 9.0 13.0-1308 22 5 -2900 7⁄8 22.2 5 290 9.0 13.0-1407 24 5 - - - - 323 10.0 14.5-1506 27 5 - - - - 359 10.5 15.5-1605 30 5 - - - - 403 11.4 17.0-1704 32 5 - - - - 425 12.5 17.5

Wrench Range

Teng Tools

87


Ratcheting Combination Spananer RangeTeng Tools. Set of 8 ratcheting combinatiuon spanners. Chrome vanadium steel. Combi-ned ringopen-ended spanner and 12 point ring ratchet. Reversible ratchet function withlever. Same size at both ends.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Chrome vanadium steel. Double, with different size 12 point sizes at each end.Manufactured according to DIN 838. Double angled 75° - high angle. Satin finish. Supplied in tool roll.

Double Ring Spanner Sets

Teng Tools. Swivel ring ratchet made of chrome vanadium steel. The ring endswivels 180°. Same size at both ends. Straight spanner is turned when shiftingbetween right and left-hand action. Satin finish.

Teng Tools. Rigger Jigger. Angled, compact, special ring spanner with 12 point opening.Designed for good access.

Compact Double Ring Spanner

Teng Tools. Set of 8 swivel combination ring ratchet spanners made of chrome vanadiumsteel. The ring end swivels 180°. Same size at both ends. Straight spanners are turned whenshifting between right and left-hand action.Supplied in plastic case with removable lock. Fits in Teng Tools tool boxes and tool trolleys.

Art. no.. . . . . . . . . . . . . . . . . . 15164 -0109Teng Tools. . . . . . . . . . . . . . . No 6308MMNo. of spanners . . . . . . . . . . 8Sizes. . . . . . . . . . . . . . . . . . . . mm 6x7 8x9 10x11 12x13

14x15 16x17 18x19 20x22Weight . . . . . . . . . . . . . . . . . . kg 1.38

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 10166 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No 601013Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10x13Length. . . . . . . . . . . . . . . . . . . . . . . . . . . mm 120Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13190 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TT6508RFNo. of keys . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 8Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 8 10 11 12

13 14 17 19Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . 13189 -0105 -0204 -0303 -0402 -0501 -0600Teng Tools . . . . . 6005 08RF 09RF 10RF 11RF 12RF 13RFSize . . . . . . . . . . . mm 8 9 10 11 12 13Length . . . . . . . . . mm 127 131 136 141 147 154Jaw thickness . . . mm 4.0 4.4 4.8 5.2 5.5 5.8Ring height . . . . . mm 6.8 7.2 7.6 8.0 8.5 9.0Pack. . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. . . . . . . . . 13189 -0709 -0808 -0907 -1004 -1103 -1202Teng Tools . . . . . 6005 14RF 15RF 16RF 17RF 18RF 19RFSize . . . . . . . . . . . mm 14 15 16 17 18 19Length . . . . . . . . . mm 160 169 179 190 203 215Jaw thickness . . . mm 6.2 6.5 6.8 7.2 7.7 8.2Ring height . . . . . mm 9.3 9.7 10.2 10.6 11.0 11.5Pack. . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . 10973 -0101 -0200Teng Tools . . . . . . . . . . . . . . . No TT6508R TT6508RAFNo. of keys . . . . . . . . . . . . . . . qty 8 8Sizes . . . . . . . . . . . . . . . . . . . . mm/inch 8 10 11 12

13 14 17 195⁄16 3⁄8 7⁄16 1⁄2

9⁄16 5⁄8 11⁄16 3⁄4Case size LxWxH . . . . . . . . . . mm 265x142x50 265x142x50Weight . . . . . . . . . . . . . . . . . . . kg 1.1 1.1

No 13190

No 13189

No 10166

No 10973

Nr 15164

Wrench Range

Teng

Too

ls

88


Double Ring Spanner SetsTeng Tools. Chrome vanadium steel. Double, with differentsize 12 point sockets at each end. Manufactured according toDIN 838/ISO 3318. Satin finish.Fits in Teng Tools tool boxes and tool trolleys.

Double Ring Spanner Range

Teng Tools. Double, with different size 12 point sockets at eachend. Dimensions according to DIN 838. Chrome vanadium ste-el. Doubled curved 75° - high angle. Satin finish.

Teng Tools. Flat double ring spanners. With different bi-hexa-gonal openings at each end. Metric. Satin Finish.

Teng Tools. Set of 8 double open ended spanners. Chrome vanadium steel. Polishedheads.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Double Open Ended Spanner Sets

Art. no. . . . . . . . . . . . 6891 -0157Teng Tools . . . . . . . . No TTX6311No. of keys. . . . . . . . . 11Sizes. . . . . . . . . . . . . . mm 6x7 8x9 10x11 12x13

14x15 16x17 18x19 20x2221x23 24x27 30x32

Case size LxWxH . . . mm 560x110x60Weight . . . . . . . . . . . . kg 2.9

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 0390 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . No TT6208No. of keys . . . . . . . . . . . . . . . . . . . . 8Measurement system . . . . . . . . . . . MetricSizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 6×7 8×9 10×11 12×13

14×15 16×17 18×19 20×22Case size LxWxH. . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8

No 11196

No 15161

No 0390

Art. no. . . . . . . . . . . . . . 15161 -0102 -0201 -0300 -0409Teng Tools . . . . . . . . . . No 630810FL 631214FL 631719FL 632224FLSizes . . . . . . . . . . . . . . . mm 8x10 12x14 17x19 22x24Length. . . . . . . . . . . . . . mm 265 328 407 430Ring height . . . . . . . . . . mm 12.5-15 17.8-20.3 23.7-26.6 31.3-34.0Pack. . . . . . . . . . . . . . . . qty 10 10 10 5

No 6891

Art. no. . . . . . . . . 11196 -0100 -0209 -0308 -0407 -0506 -0605Teng Tools. . . . . . No 630607 630809 631011 631213 631415 631617Sizes. . . . . . . . . . . mm 6x7 8x9 10x11 12x13 14x15 16x17Length . . . . . . . . . mm 168 183 198 217 239 260Ring height . . . . . mm 5.6-6.3 6.6-7.0 7.4-7.7 8.1-8.4 8.8-9.1 9.5-9.8Pack. . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. . . . . . . . . 11196 -0704 -0803 -0902 -1009 -1108Teng Tools. . . . . . No 631819 6312022 6312123 6312427 6313032Sizes. . . . . . . . . . . mm 18x19 20x22 21x23 24x27 30x32Length . . . . . . . . . mm 292 318 326 329 362Ring height . . . . . mm 10.1-10.4 10.9-11.4 11.2-11.6 12.4-13.4 14.4-15.2Pack. . . . . . . . . . . qty 10 5 5 5 5

Wrench Range

Teng Tools

89


Double Open Ended Spanner SetsTeng Tools. Double, open ended spanners in set. Chrome vanadium steel. Dimensionsaccording to DIN 3110/ISO 3318. Satin finish.Supplied in tool roll.

Double Open Ended Spanner Range

Teng Tools. Double. Chrome vanadium steel. Dimensions ac-cording to DIN 3110/ISO 3318. Angle 15°. Satin finish.

Double Flex WrenchesTeng Tools. Chrome vanadium steel. Double, with different size 12 point socketsat each end. Satin finish. Supplied in a plastic TC tray with removable cover. Fits inTeng Tools tool boxes and tool trolleys.

Teng Tools. Rack with 6 double swivel head wrenches. Chrome vanadium steel. Withdifferent size 12-point sockets at each end. The sockets fitted using a screw. Chromiumplated.Supplied on wall rack.

Art. no. . . . . . . . . . . . . . . . . . 15165 -0108Teng Tools . . . . . . . . . . . . . . No 6211MMNo of spanners . . . . . . . . . . 11Sizes . . . . . . . . . . . . . . . . . . . mm 6x7 8x9 10x11 12x13

14x15 16x17 18x19 20x2221x23 24x27 30x32

Weight. . . . . . . . . . . . . . . . . . kg 1.93

Art. no. . . . . . . . . . . . . . . . . 12823 -0109Teng Tools . . . . . . . . . . . . . No WRDF06No. of keys . . . . . . . . . . . . . ea. 6Sizes . . . . . . . . . . . . . . . . . . mm 8x9 10x11 12x13

14x15 16x17 18x19Pack. . . . . . . . . . . . . . . . . . . set 5

Art. no.. . . . . . . . . . . . . . . . . . . . . 7300 -0101Teng Tools. . . . . . . . . . . . . . . . . . No TT6506No. of keys. . . . . . . . . . . . . . . . . . 6Sizes. . . . . . . . . . . . . . . . . . . . . . . mm 8×9 10×11 12×13

14×15 16×17 18×19Case size LxWxH . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . kg 1.57Pack. . . . . . . . . . . . . . . . . . . . . . . qty 10

No 10170

No 12823

No 7300

Art. no. . . . . . . . . . . . . . . . . . . . 10170 -0102 -0201 -0300 -0409 -0508 -0607Teng Tools . . . . . . . . . . . . . . . . No 620607 620809 621011 621213 621415 621617Sizes . . . . . . . . . . . . . . . . . . . . . mm 6x7 8x9 10x11 12x13 14x15 16x17Length . . . . . . . . . . . . . . . . . . . . mm 123 140 156 172 189 204Spanner thickness . . . . . . . . . mm 3.7 4.0 5.0 5.5 5.9 6.3Pack. . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . 10170 -0706 -0805 -0904 -1001 -1100Teng Tools . . . . . . . . . . . . . . . . No 621819 622022 622123 622427 623032Sizes . . . . . . . . . . . . . . . . . . . . . mm 18x19 20x22 21x23 24x27 30x32Length . . . . . . . . . . . . . . . . . . . . mm 221 237 247 263 298Spanner thickness . . . . . . . . . mm 6.7 7.1 7.7 8.1 9.0Pack. . . . . . . . . . . . . . . . . . . . . . qty 10 5 5 5 5

Nr 15165

Wrench Range

Teng

Too

ls

90


Double Flex WrenchesTeng Tools. Chrome vanadium steel. Double, with differentsize 12 point sockets at each end. Satin finish.

Teng Tools. Bi-Flex-wrench. Equipped with 1⁄4″ bit socket atone end of the wrench and 1⁄4″ ❒-drive at the other end.

Flare Nut Wrench Range

Teng Tools. Chrome vanadium steel. Double, angled flarednut spanners with different openings at each end. Satin finish.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 1558 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . No 691406With socket drive . . . . . . . . . . . . . . . . . ❒ 1⁄4With bit socket for bits. . . . . . . . . . . . . g 1⁄4Length of wrench. . . . . . . . . . . . . . . . . mm 200Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

No 7292

No 10584

Metric seriesTeng Tools 6500

AF seriesTeng Tools 6100

Length

Art. no. Size Pack. Art. no. Size Size Pack.vidd

7292 mm qty 7292 AF mm qty mm-0200 8×9 20 - - - - 192-0309 10×11 20 -1000 3⁄8×7⁄16 9.5×11.1 20 200-0358 10×13 1 - - - - 213-0408 12×13 20 -1109 1⁄2×9⁄16 12.7×14.3 20 218

-0507 14×15 20 - - - - 238-0606 16×17 20 -1208 5⁄8×11⁄16 15.9×17.5 20 264-0705 18×19 20 - - - - 285

No 1558

Metric series AF series Length RingArt. no. Teng Size Pack. Art. no. Teng Size Size Pack. height

Tools Tools10584 no mm qty 10584 no AF mm qty mm mm-0102 641011 10×11 10 - - - - - 152 7.9

- - - - -0300 661416 7⁄16×1⁄2 11.1×12.7 10 159 11.9-0201 641213 12×13 10 - - - - - 178 10.0

-0227 641314 13×14 1 - - - - - 178 10.0-0243 641617 16×17 10 - - - - - 196 11.6-0268 641922 19×22 11 - - - - - 207 13.8

Wrench Range

Teng Tools

91


Teng Tools. Chrome vanadium steel. Double, with different size 12-point sockets at eachend (6-8mm 6-point). Angled 25° towards the handle. Reversible action. Satin finish.Supplied in plastic box which fits in Teng Tools tool boxes and tool trolleys.

Ratcheting Offset Ring Spanners

Teng Tools. Ratcheting spanners with 9x12 mm rectangular drive for attachment to swivelhandle 600010RI. Satin finish.

Ratcheting spanners

Teng Tools. Ratchet head with 9x12 mm rectangular drive for attachment to swivel handle600010RI. 3⁄8″ square drive for sockets and socket tools. Satin finish.

Ratchet head

Teng Tools. Swivel handle with 9x12 mm rectangular drive for different insert tools such asratchet head and ratcheting spanners. Satin finish and two component handle.

Flex handleInsert Tools

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11830 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 600010RIRectangular drive . . . . . . . . . . . . . . . . . . . . . . . mm 9x12Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 239Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11828 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 600038RIAttachment to socket tools ❒ . . . . . . . . . . . . . . . . . . . . . . inch 3⁄8Attachment to swivel handle . . . . . . . . . . . . . . . . . . . . . . mm 9x12Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11670 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . No TTRORSNo. of keys . . . . . . . . . . . . . . . . . . . . 6Sizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 6×8 7x9 10x13

12x14 17x19 21x22Case size LxWxH. . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 1.26

No 11829

No 11830

No 11828

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11829 -0105 -0204 -0303 -0402Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 600508RI 600510RI 600511RI 600512RISize. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 8 10 11 12Outside diameter of ring head . . . . . . . . . . . . . mm 17 20 21 23Height of ring head . . . . . . . . . . . . . . . . . . . . . . . mm 6.8 7.6 8 8.5Attachment to swivel handle . . . . . . . . . . . . . . . mm 9x12 9x12 9x12 9x12Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11829 -0501 -0600 -0709 -0808Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 600513RI 600516RI 600517RI 600519RISize. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 13 16 17 19Outside diameter of ring head . . . . . . . . . . . . . mm 25 30 32 34Height of ring head . . . . . . . . . . . . . . . . . . . . . . . mm 8.9 10.2 10.6 11.5Attachment to swivel handle . . . . . . . . . . . . . . . mm 9x12 9x12 9x12 9x12Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10

No 11670

Wrench Range

Teng

Too

ls

92


Teng Tools. Set of 8 crow foot spanners. Satin finish. Chrome vanadiumsteel. The spanners are supplied on a clipholder with 3⁄8″ ❒-drive fortightening with socket tools e.g. extension bar and ratchet handle.

Crow Foot Wrenches

Teng Tools. Light weight aluminium pipe wrench in sturdydesign. One hand operation leaving the other hand free.

Pipe Wrenches

Teng Tools. With gauge. Chrome vanadium steel. The outer part of thejaws are tapered - facilitates gripping. Hole in the end of the handle.Phosphate finish.

Adjustable Wrench Range

Teng Tools. Chrome vanadium steel. Double, with differentsize 12-point sockets at each end (6-8 mm 6-point) . Angled 25°towards the handle. Reversible action. Satin finish.

Ratcheting Offset Ring Spanners

Art. no. . . . . . . . . . . . . . . . 11199 -0107Teng Tools . . . . . . . . . . . . No M3808MMNo. of keys . . . . . . . . . . . . 8Drive ❒ . . . . . . . . . . . . . . . inch 3⁄8Sizes . . . . . . . . . . . . . . . . . mm 10 11 12 13

16 17 18 19Pack. . . . . . . . . . . . . . . . . . sts 10

No 10587

No 11671

No 15181

Art. no. . . . . . . . . . . . . . . . . . 11671 -0104 -0203 -0302 -0401 -0500 -0609Teng Tools . . . . . . . . . . . . . . No 680608 680709 681013 681214 681719 682122Sizes . . . . . . . . . . . . . . . . . . . mm 6×8 7×9 10×13 12×14 17×19 21×22Length . . . . . . . . . . . . . . . . . . mm 112 133 163 172 203 235Ring head o.d. . . . . . . . . . . . mm 20, 20 21, 23 26, 30 30, 32 37, 40 41, 45Ring head height . . . . . . . . . mm 8 8.4 10.2 10.2 11.0 11.4Pack. . . . . . . . . . . . . . . . . . . . qty 25 25 25 25 25 25

Art. no. . . . . . . . . . 10587 -0059 -0109 -0208 -0307 -0406 -0505 -0604 -0703Teng Tools . . . . . . No 40014001 4002 4003 4004 4005 4006 4007 4008Size . . . . . . . . . . . . mm 1717 24 28 33 38 50 60 70Length. . . . . . . . . . mm 100100 150 200 250 300 375 450 600Pack. . . . . . . . . . . . qty 10 10 6 6 6 5 6 1

Art. no. . . . . . . . . . . . . . . . . 15181 -0108 -0207 -0306 -0405 -0504Teng Tools . . . . . . . . . . . . . No PW12A PW14A PW18A PW24A PW36ACapaacity . . . . . . . . . . . . . . mm 39 47 63 76 127For mx. pipes . . . . . . . . . . . inch 19⁄16 17⁄8 21⁄2 3 5Length . . . . . . . . . . . . . . . . . mm 300 350 450 600 900Pack. . . . . . . . . . . . . . . . . . . qty 1 6 6 6 3

No 11199

Wrench Range

Teng Tools

93


Crow Foot WrenchesTeng Tools. Crow foot spanners with 3⁄8″ ❒-drive for tightening with socket tools, e.g.extension bar and ratchet handle.

Teng Tools. 9 socket screwdrivers with blade of TT-MV steel.6-point opening. Two component handle with hanging hole.Supplied in plastic box which fits in Teng Tools tool boxes andtool trolleys.

Nut Drivers

Tubular WrenchesTeng Tools. Made of chrome vanadium steel - hollow over entire length. 6 double spanners- with different hex openings at each end and a turning bar. Can also be turned with aspanner. Satin finish.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Made of chrome vanadium steel - hollow of entire length. Double - withdifferent hex openings at each end. Hole for turning bar. Can also be turned with aspanner. Satin finish.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11459 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . No TTXMDNSizes . . . . . . . . . . . . . . . . . . . . . . . . . mm 5 5.5 6 7 8

10 11 12 13Total length of screwdrivers . . . . . . mm 245Insert size LxWxH . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . kg 1.6

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11839 -0103Teng Tools . . . . . . . . . . . . . . . . . . . No TTTW07No. of keys . . . . . . . . . . . . . . . . . . . 6Sizes . . . . . . . . . . . . . . . . . . . . . . . . mm 8x9, 10x11, 12x13,

14x15, 16x17, 18x19Case size LxWxH. . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Metric series LengthTeng Tools M3865-C

Art. no. Size Pack.11201 mm qty mm-0103 10 10 32.3-0202 11 10 34.3-0301 12 10 36.2-0400 13 10 37.4

-0509 14 10 40.0-0608 15 10 190-0707 16 10 200-0806 17 10 210

-0905 18 10 220-1002 19 10 230

No 11837

No 11839

No 11201

No 11459

Art. no. . . . . . . . . . 11837 -0105 -0204 -0303 -0402 -0501 -0600Teng Tools . . . . . . No 630607T 630809T 631011T 631213T 631415T 631617TSize . . . . . . . . . . . . mm 6x7 8x9 10x11 12x13 14x15 16x17Length. . . . . . . . . . mm 105 110 120 140 145 155Pack.. . . . . . . . . . . qty 20 20 15 10 10 6

Art. no. . . . . . . . . . 11837 -0709 -0808 -0907 -1004 -1103 -1202Teng Tools . . . . . . No 631819T 632022T 632123T 632427T 632527T 633032TSize . . . . . . . . . . . . mm 18x19 20x22 21x23 24x27 25x28 30x32Length. . . . . . . . . . mm 165 175 185 195 205 210Pack.. . . . . . . . . . . qty 6 5 5 4 4 4

Turning bar for the above spanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11837 -2002 -2101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 630011 630012For size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 6-19 20-32Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10

Wrench Range

Teng

Too

ls

94


Nut Drivers

Teng Tools. TT-MV steel shank. 6 point opening. Black ergo-nomically designed two component handle with hanging hole.

Teng Tools. T handle nut drivers. Chrome vanadium shank. 6 pointopening. Ergonomically designed two component T handle for extratorque.

Teng Tools. Adjustable. With hook for locking nuts. Chrome vanadiumsteel

Hook WrenchesTeng Tools. Set consisting of 3 combined pin/hook spanners with 3 pin adaptors and 2spare pins in diameters 6 and 8 mm.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no. . . . . . . . . . . . 11202 -0102 -0201 -0300Teng Tools . . . . . . . . No HP101 HP102 HP103For diameter. . . . . . . mm 19-50 32-75 50-120Length. . . . . . . . . . . . mm 145 178 247Pack. . . . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10212 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTHP08Hook spanners for diameter . . . . . . . . . . . . . . mm 19-50 30-75 50-120Pin adaptors with pin diam.. . . . . . . . . . . . . . . mm 4 5 6Separate pins diameter . . . . . . . . . . . . . . . . . . mm 6 8Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.2

No 11268

No 13218

No 11202

No 10212

Art. no.. . . . . . . . 13218 -0100 -0209 -0308 -0407 -0506 -0605Teng Tools. . . . . No MDNT405 MDNT4055 MDNT406 MDNT407 MDNT408 MDNT409Size. . . . . . . . . . . mm 5 5.5 6 7 8 9Total length . . . . mm 288 288 288 288 288 288Pack.. . . . . . . . . . qty 10 10 10 10 10 10

Art. no.. . . . . . . . 13218 -0704 -0803 -0902 -1009 -1108Teng Tools. . . . . No MDNT410 MDNT411 MDNT412 MDNT413 MDNT414Size. . . . . . . . . . . mm 10 11 12 13 14Total length . . . . mm 288 288 288 288 288Pack.. . . . . . . . . . qty 10 10 10 10 10

Art. no.. . . . . . . . . . 11268 -0103 -0202 -0301 -0400 -0509 -0608 -0707 -0806 -0905Teng Tools . . . . . . . MDN- 405 4055 406 407 408 410 411 412 413Size . . . . . . . . . . . . . mm 5 5.5 6 7 8 10 11 12 13Blade length. . . . . . mm 125 125 125 125 125 125 125 125 125Total length . . . . . . mm 245 245 245 245 245 245 245 245 237Pack.. . . . . . . . . . . . qty 5 5 5 5 5 5 5 5 5

Wrench Range

Teng Tools

95


Teng Tools. Contains 9 hex keys. Chrome vanadium steel. Black. In folding plastic holder.

Teng Tools. With holding ring. Contains 10 keys. Chrome vanadium steel. Black.

Teng Tools. Set of 28 pieces. Contains two hex key sets in metric and imperial sizes(1479MM and 1479AF) a TX-set (1479TX) and a 7 mm hex key with ball point.Supplied in plastic insert case with removable lock. Fits in Teng Tools tool boxes and tooltrolleys.

Hex Key Wrench Sets

Teng Tools. Adjustable. With fixed pin for locking nuts. Chrome van-adium steel. Application areas for the different sizes see page 0000.

Hook Wrenches

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12825 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTHT28No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 28Hex keys 1479MM . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5 3 4

5 6 8 10Hex keys 1479AF . . . . . . . . . . . . . . . . . . . . . . inch 5⁄64 3⁄32 1⁄8 5⁄32 3⁄16

7⁄32 1⁄4 5⁄16 3⁄8Hex key with ball point . . . . . . . . . . . . . . . . . . mm 7TX-keys 1479TX. . . . . . . . . . . . . . . . . . . . . . . TX 8 9 10 15 20

25 27 30 40Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . mm 265xx142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.4

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 10582 -0104 -0203Teng Tools . . . . . . . . . . . . . . . . . . . . No 1425 1424Measurement system . . . . . . . . . . . Millimetre InchSizes . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 2 2.5

3 4 5 67 8 10

1⁄16 5⁄64 3⁄32 1⁄85⁄32 3⁄16 7⁄32 1⁄4

5⁄16 3⁄8No. of sets . . . . . . . . . . . . . . . . . . . . per pack. 6 6

Art. no.. . . . . . . . . . . . . . . . . . . 11269 -0102Teng Tools. . . . . . . . . . . . . . . . No 1479MMRSizes. . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5 3 4

5 6 8 10No. of sets . . . . . . . . . . . . . . . . per pack. 10

No 11203

Art. no.. . . . . . . . . . . . . . . 11203 -0101 -0200 -0309 -0408 -0507 -0606Teng Tools. . . . . . . . . . . . No HP2014 HP2015 HP2025 HP2026 HP2036 HP2038For diameter . . . . . . . . . . mm 19-50 19-50 32-75 32-75 50-120 50-120Pin diam. . . . . . . . . . . . . . mm 4 5 5 6 6 8Length . . . . . . . . . . . . . . . mm 145 145 178 178 247 247Pack.. . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10

Separate drive . . . . . . . . 11203 -1000 -1109 -1208 -1307 -1406 -1505Pack.. . . . . . . . . . . . . . . . . qty 5 5 5 5 5 5

No 12825

No 11269

No 10582

Wrench Range

Teng

Too

ls

96


Hex Key Wrench Sets

Teng Tools. Sets of 7 hex keys. Chrome vanadium steel. Black. With ballpoint heads on the long key end - which permits turning even at an angle.Supplied in plastic holder.

Teng Tools. Set of 9 hex keys of chrome vanadium steel With ballpointhexagonal heads at the long key end - which permits turning at a 30°°angle. Supplied in plastic holder.

Teng Tools. 7 hex keys in set. Chrome vanadium steel. Retractable in aluminium case withnylon inserts.

Teng Tools. Sets of 9 chrome vanadium steel hex keys. With ballpointhexagonal heads at the long key end - which permits turning at a 30°angle.° Supplied in folding plastic holder.

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11724 -0101Teng Tools . . . . . . . . . . . . . . . . . . . No 1479MMAMeasurement system . . . . . . . . . . MillimetreNo. of keys . . . . . . . . . . . . . . . . . . . ea. 9Sizes . . . . . . . . . . . . . . . . . . . . . . . . mm 1.5 2 2.5 3 4

5 6 7 10No. of sets . . . . . . . . . . . . . . . . . . . . per pack. 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 15147 -0101 -0200Teng Tools . . . . . . . . . . . . . . . . . . . . No 1476NMM 1476NAFMeasurement system . . . . . . . . . . . Metric AFNo of keys. . . . . . . . . . . . . . . . . . . . . e.a. 7 7Sizes . . . . . . . . . . . . . . . . . . . . . . . . . mm/inch 1.5 2 2.5

3 4 5 61⁄16 5⁄64 3⁄32 1⁄8

5⁄32 3⁄16 7⁄32

No. of sets . . . . . . . . . . . . . . . . . . . . 10 10

Art. no. . . . . . . . . . . . . . . 11226 -0104 -0203Teng Tools . . . . . . . . . . . No 1479MM 1479AFMeasurement system . . Millimetre InchNo. of keys. . . . . . . . . . . . ea. 9 9Sizes. . . . . . . . . . . . . . . . . mm/inch 1.5 2 2.5 3 4

5 6 8 105⁄64 3⁄32 1⁄8 5⁄323⁄16

7⁄32 1⁄4 5⁄16 3⁄8No. of sets . . . . . . . . . . . . per pack. 10 10

Art. no. . . . . . . . . . . . . . . . . . 10955 -0103 -0202Teng Tools . . . . . . . . . . . . . . No 1475 1474Measurement system . . . . . Metric AFNo. of keys . . . . . . . . . . . . . . 7 7Sizes . . . . . . . . . . . . . . . . . . . mm/inch 2.5 3 4 5

6 8 101⁄8 5⁄32 3⁄16 7⁄32

1⁄4 5⁄16 3⁄8No. of sets. . . . . . . . . . . . . . . per pack. 6 6

No 15147

No 11226

No 10955

No 11724

Wrench Range

Teng Tools

97


Individual Hex Key Wrenches

Teng Tools. Chrome vanadium steel. Dimension marked. Black.

Teng Tools. Chrome vanadium steel. Black. With ballpointhexagonal head at the long key end - which permits turning at a30° angle.

No 11656-10657

No 12269

Metric series AF seriesTeng Tools 3105 Teng Tools 3101

Art. no. Size Length Pack. Art. no. Size Size Length Pack.11656 mm mm qty 11657 AF mm mm qty-0103 0.7 35×8 100 - - - - --0202 0.9 38×10 100 - - - - --0301 1.3 41×12 100 - - - - --0400 1.5 45×14 100 -0102 1⁄16 1.6 44×14 100

-0509 2 50×16 100 -0201 5⁄64 2 48×15 100-0608 2.5 56×18 100 -0300 3⁄32 2.4 51×17 100

- - - - -0409 7⁄64 2.8 54×18 100-0707 3 63×20 100 -0508 1⁄8 3.2 57x19 100

- - - - -0607 9⁄64 3.6 60×20 100-0806 4 70×25 100 -0706 5⁄32 4 64×21 100-0905 4.5 75×26 100 -0805 3⁄16 4.8 70×24 100-1002 5 80×28 100 - - - - --1101 5.5 85×30 50 -0904 7⁄32 5.6 76×26 50

-1200 6 90×32 50 -1001 1⁄4 6.4 83×28 50-1309 7 95×34 40 - - - - --1408 8 100×36 50 -1100 5⁄16 8 95×32 50-1507 9 106×38 30 -1209 3⁄8 9.5 108x35 50

-1606 10 112×40 50 - - - - -- - - - -1308 7⁄16 11.1 121x38 5

-1705 12 125×45 10 -1407 1⁄2 12.7 133×41 10

-1804 14 140×56 5 - - - - --1903 17 160×63 5 - - - - --2000 19 180×70 5 - - - - -

Art. no. . . . . . . . . . . . . . . 12269 -0100 -0209 -0308 -0407 -0506 -0605 -0704 -0753 -0803 -0902Teng Tools 3105BL-CSize. . . . . . . . . . . . . . . . . . mm 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0Length . . . . . . . . . . . . . . . mm 77x14 83x16 90x18 98x20 106x24 118x28 137x32 147x34 156x36 170x40Pack. . . . . . . . . . . . . . . . . qty 10 10 50 10 10 10 10 40 30 30

Wrench Range

Teng

Too

ls

98


T Handle Hex DriversTeng Tools. Set of 7 hex keys with T-handle. With ball point head on the long key end -which improves access.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Rack with 7 hex keys with T-handle in metric and imperial sizes. With ballpointhead on the long key end - which improves access.Supplied on wall rack.

Teng Tools. Hex keys with T-handle. With ballpoint head on the long key end -which improves access.

Art. no. . . . . . . . . . . . . . . . . . 6893 -0106 -0205Teng Tools . . . . . . . . . . . . . . No TTHEX7 TTHEX7AFNo. of keys . . . . . . . . . . . . . . 7 7Sizes . . . . . . . . . . . . . . . . . . . mm/inch 2.5 3 4

5 6 7 83⁄32, 1⁄8, 5⁄32, 3⁄16,

7⁄32, 1⁄4, 5⁄16

Case size LxWxH. . . . . . . . . mm 265x142x50 265x142x50Weight . . . . . . . . . . . . . . . . . . kg 0.72 0.72

Art. no.. . . . . . . . . . . . 12826 -0106 -0205Teng Tools . . . . . . . . . No WRHEX07 WRHEX07AFSizes . . . . . . . . . . . . . . mm/inch 2.5 3 4 5

6 7 8 3⁄32 1⁄8 5⁄32 3⁄16

7⁄32 1⁄4 5⁄16

Pack.. . . . . . . . . . . . . . set 5 5

No 10179

No 6893

No 12826

Millimetre-series American-series LengthTeng Tools 5105 Teng Tools 5101

Art. no. Size Pack. Art. no. Size Size Pack.width width width

10179 mm qty 10179 inch mm qty mm-0053 2.0 10 - - - - 12x100-0103 2.5 10 -2000 3⁄32 2.4 10 12x100-0202 3 10 -2109 1⁄8 3.2 10 12x100-0301 4 10 -2208 5⁄32 4 10 12x100-0400 5 10 -2307 3⁄16 4.8 10 15x150

-0509 6 10 -2406 7⁄32 5.6 10 15x150-0608 7 10 -2505 1⁄4 6.4 10 15x150-0707 8 10 -2604 5⁄16 8 10 18x190-0806 10 10 - - - - 20x200-0905 12 10 - - - - 20x200

Wrench Range

Teng Tools

99


Teng Tools. TX-keys with T-handle. For internal TX heads. Short key end also has a slotfor tamper proof screws. Also see information about Torx heads

Teng Tools. Rack with 7 TX/TPX keys with T-handle. For internal TX heads (short end alsofor tamper proof screws).Supplied on wall rack.

Teng Tools. Set of 7 TX-keys with T-handle. For internal TX heads (short end also fortamper proof screws).Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

T Handle TX/TPX Drivers

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 6892 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . No TTTX7No. of keys . . . . . . . . . . . . . . . . . . . . . . ea. 7Key sizes . . . . . . . . . . . . . . . . . . . . . . . TX- 10 15 20 25

27 30 40For max. head width . . . . . . . . . . . . . . mm 2.74 3.27 3.86 4.43

4.99 5.52 6.65For screw . . . . . . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4 4.5-5

4.5-6 6-7 7-8Case size LxWxH . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.72

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12827 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRTX07No. of keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 7For TX/TPX-heads . . . . . . . . . . . . . . . . . . . . . No 10 15 20 25

27 30 40Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . 10180 -0050 -0100 -0209 -0308 -0407 -0506Teng Tools 5200 Key no . . . . . . . . . . . TX/TPX- 9 10 15 20 25 27Max. head width . . mm 2.50 2.74 3.27 3.86 4.43 4.99For screw . . . . . . . . M 3 3-3.5 3.5-4 4-5 4.5-5 4.5-6Spanner length . . . mm 12x100 12x100 12x100 12x100 15x150 15x150Pack. . . . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. . . . . . . . . . . 10180 -0605 -0704 -0803 -0902 -1009Teng Tools 5200 Key no . . . . . . . . . . . TX/TPX- 30 40 45 50 55Max. head width . . mm 5.52 6.65 7.82 8.83 11.25For screw . . . . . . . . M 6-7 7-8 8-10 10 12Spanner length . . . mm 15x150 18x190 20x200 20x200 20x200Pack. . . . . . . . . . . . . qty 10 10 10 10 10

No 6892

No 12827

No 10180

Wrench Range

Teng

Too

ls

100


A full range of individual TX keys are also available, please contact your local Teng Toolsdistributor for further details.

Teng Tools. For internal heads according to the TX-system. Of chrome vanadium steel.Black. Retractable in the aluminium handle with nylon inserts.

Teng Tools. Set of 7 keys. In a ring. For internal TX heads Chrome vanadium steel.

Teng Tools. For internal TX heads. Chrome vanadium steel. In folding plastic holder.

Teng Tools. Set containing a bit socket with 5⁄16″-g-drive and three TX bits for internal TXheads. For hand tightening.

TX Sets

Teng Tools. Set containing a bit socket with 1⁄4″-g-drive and 6 TX bits for internal TX heads.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 15148 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No 1476NTXNo of keys . . . . . . . . . . . . . . . . . . . . . . . e.a. 8Key-no. . . . . . . . . . . . . . . . . . . . . . . . . . . TX- 9 10 15 20

25 27 30 40For max. head width . . . . . . . . . . . . . . . mm 2.5 2.74 3.27 3.86

4.43 4.99 5.52 6.65For screw . . . . . . . . . . . . . . . . . . . . . . . . M 3 3-3.5 3.5-4 4-5

4.5-5 4.5-6 6-7 7-8Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7370 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 1488Socket 1⁄2-❒ for bits . . . . . . . . . . . . . . . . . . . . . . . inch g 5⁄16

TX bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TX 45 50 55For screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 8-10 10 12Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 10583 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No 1487No. of keys . . . . . . . . . . . . . . . . . . . . . . . 7Key no. . . . . . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20

25 27 30 40For max. head width . . . . . . . . . . . . . . . mm 2.74 3.27 3.86

4.43 4.99 5.52 6.65For screw . . . . . . . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5

4.5-5 4.5-6 6-7 7-8Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . 7369 -0109Teng Tools . . . . . . . . . . . . . . . . . No 1486Socket 3⁄8-❒ for bits . . . . . . . . . . inch g 1⁄4″TX bits . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25 30 40For screw. . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 6-7 7-8Pack. . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11660 -0107Teng Tools . . . . . . . . . . . . . . . . . . . No 1479TXNo. of keys . . . . . . . . . . . . . . . . . . . ea. 9Key-no . . . . . . . . . . . . . . . . . . . . . . TX- 8 9 10 15 20

25 27 30 40For max. head width . . . . . . . . . . . mm 2.31 2.5 2.74 3.27 3.86

4.43 4.99 5.52 6.65For screw . . . . . . . . . . . . . . . . . . . . M 2.5 3 3-3.5 3.5-4 4-5

4.5-5 4.5-6 6-7 7-8No. of sets . . . . . . . . . . . . . . . . . . . per pack. 10

No 11660

No 10583

No 7370

No 7369

Nr 15148

Mega Drive

Teng Tools

101


Screwdriver informationThe Teng Tools range of Mega Drive screwdrivers feature a unique ergonomicallydesigned bi-material grip (design registration no 37946ROC) with a choice of hexa-gon or round shanks, flared or parallel hardened tips and T drive hanging holefacility.A complete range is available in flat, PH, PZ, TX and TPX including power throughwith phosphate finish, extra long jumbo screwdrivers in flat and PH and with in-sulation for all purpose automotive use. All Teng Tools screwdrivers are designed tomeet or exceed BS2559 torque tolerances.

Our new TT-MV steel gives a blade with much better performance than our previousChrome Vanadium material. It will stand 25% higher torque and torsion.

Screwdriver setsTeng Tools. Set of 6 screwdrivers, 3 for slotted heads and 3 for Phillips heads. Blade ofTT-MV steel. The screwdrivers have two component handles with hanging holes. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 6 screwdrivers for slotted heads and Pozidriv/Supadriv heads. Twocomponent handle with hanging hole.Supplied in plastic case with removable lock. Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Set of 12 screwdrivers for slotted heads as well as Phillipsand Pozidriv heads. With blade of TT-MV steel. Black ergonomicallydesigned two component handle with hanging hole.Supplied in plastic case.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10928 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MD906PContents:Screwdriver MD 920. . . . . . . . . . . . . . . . . . . . . . . mm 0.6x3-75Screwdriver MD922 . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5-75Screwdriver MD932 . . . . . . . . . . . . . . . . . . . . . . . mm 1.2x6.5-100Screwdriver MD940PH . . . . . . . . . . . . . . . . . . . . No 0-75Screwdriver MD941PH . . . . . . . . . . . . . . . . . . . . No 1-75Screwdriver MD952PH . . . . . . . . . . . . . . . . . . . . No 2-100Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.42Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13217 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MD906PZContents:Screwdriver MD920 . . . . . . . . . . . . . . . . . . . . . . . mm 0.6x.2-75Screwdriver MD922 . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.0-75Screwdriver MD932 . . . . . . . . . . . . . . . . . . . . . . . mm 1.2x6.0-100Screwdriver MD960 PZ . . . . . . . . . . . . . . . . . . . . No 0-75Screwdriver MD961 PZ . . . . . . . . . . . . . . . . . . . . No 1-75Screwdriver MD962 PZ . . . . . . . . . . . . . . . . . . . . No 2-100Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.45Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . 4425 -0108Teng Tools. . . . . . . . . . . . . . No MD912Contents:1 x MD921 . . . . . . . . . . . . . . mm 0.6x3.0x1001 x MD922 . . . . . . . . . . . . . . mm 1.0x5.5x751 x MD923 . . . . . . . . . . . . . . mm 1.0x5.5x1501 x MD933 . . . . . . . . . . . . . . mm 1.4x6.5x1501 x MD934 . . . . . . . . . . . . . . mm 1.4x8.0x1501 x MD928 . . . . . . . . . . . . . . mm 1.4x6.5x381 x MD940 PH. . . . . . . . . . . No 0-751 x MD941 PH. . . . . . . . . . . No 1-751 x MD952 PH. . . . . . . . . . . No 2-1001 x MD948 PH. . . . . . . . . . . No 2-381 x MD961 PZ . . . . . . . . . . . No 1-751 x MD972 PZ . . . . . . . . . . . No 2-100Weight per set. . . . . . . . . . . kg 1.3No. of sets . . . . . . . . . . . . . . per pack. 10

No 4425

No 13217

No 10928

Mega Drive

Teng

Too

ls

102


Screwdriver setsTeng Tools. Set of 7 screwdrivers including flat as well as Phillips and Pozidriv cross-pointtips. With blade of TT-MV steel. Two component handle with hanging hole. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 8 screwdrivers of which are 2 Stubby-screwdrivers. Blade of TT-MV steel. Two component handlewith hanging hole.Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. A wall rack with 5 Power Thru screwdrivers. Hexagon blade made of TT-MV-steel, satin finish. The blade form allows tightening using an open spanner.Supplied on wall rack.

Teng Tools. Rack with 10 screwdrivers for slotted heads, Phillips and Pozidriv heads.TT-MV steel blades and ergonomically designed two-component handles.Supplied on wall rack.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3017 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT917Contents: 1 x MD920 . . . . . . . . . . . . . . . . . . . . . . . . . mm 0.6x3.0x75

1 x MD922 . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5x751 x MD932 . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.4x6.5x1001 x MD940 PH. . . . . . . . . . . . . . . . . . . . . . No 0-751 x MD941 PH. . . . . . . . . . . . . . . . . . . . . . No 1-751 x MD942 PH. . . . . . . . . . . . . . . . . . . . . . No 2-1001 x MD 972 PZ . . . . . . . . . . . . . . . . . . . . . No 2-100

Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.7

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 6897 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTX918Contents:Screwdriver MD928. . . . . . . . . . . . . . mm 6.5x38Screwdriver MD921. . . . . . . . . . . . . . mm 3.0x100Screwdriver MD923. . . . . . . . . . . . . . mm 5.5x150Screwdriver MD933. . . . . . . . . . . . . . mm 6.5x150Screwdriver MD934. . . . . . . . . . . . . . mm 8.0x150Screwdriver MD935. . . . . . . . . . . . . . mm 10x200Screwdriver MD948 Phillips . . . . . . . No 2x38Screwdriver MD953 Phillips . . . . . . . No 3x150Case size LxWxH. . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12829 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRMD10Contents:Screwdriver MD921 . . . . . . . . . . . . . . . . . . . . . mm 0.5x3.0-100

MD922 . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5-75MD923 . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5-150MD933 . . . . . . . . . . . . . . . . . . . . . mm 1.2x6.5-150MD934 . . . . . . . . . . . . . . . . . . . . . mm 1.2x8.0-150MD940 . . . . . . . . . . . . . . . . . . . . . No PH0-75MD941 . . . . . . . . . . . . . . . . . . . . . No PH1-75MD952 . . . . . . . . . . . . . . . . . . . . . No PH2-100MD961 . . . . . . . . . . . . . . . . . . . . . No PZ1-75MD972 . . . . . . . . . . . . . . . . . . . . . No PZ2-100

Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15158 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRMDT05Containing:Screwdriver MD932 . . . . . . . . . . . . . . . . . . . . . mm 1.2x6.5-100

MD934 . . . . . . . . . . . . . . . . . . . . . mm 1.2x8-150MD935 . . . . . . . . . . . . . . . . . . . . . mm 1.6x10-200MD952 . . . . . . . . . . . . . . . . . . . . . Nr PH2-100MD953 . . . . . . . . . . . . . . . . . . . . . Nr PH3-150

No 12829

Nr 15158

No 6897

No 3017

Mega Drive

Teng Tools

103


Screwdriver setsTeng Tools. Set of 53 pieces. Contains 19 screwdrivers, bit ratchet screwdriver with 6 bitsand 27 different screwdriver bits.Supplied in plastic case. with click-lock.

Teng Tools. Set of 12 pieces. Contains one screwdriver handle and 11 separate reversiblescrewdriver blades with a screwdriver tip at each end.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Separate parts for set TTMD12D.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 14431 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . No MD9053Screwdrivers for slotted heads . . . mm 10x200, 8x150, 6.5x150, 6.5x100,

5.5x150, 5.5x75, 4x100, 3x100, 3x75, 6x38Screwdrivers for PH cross heads . No 1x75, 2x100, 2x38, 3x150Screwdrivers for PZ cross heads . No 0x75, 1x75, 2x100,

2x38, 3x150Bit ratchet screwdriver with bits . . 1.2x5, 1.4x7,

PH1, PH2, PZ1, PZ2Bits for PZ cross head tips . . . . . . . No 0Bits for TX-heads . . . . . . . . . . . . . . TX 6, 7, 8, 9, 10, 15x2,

20x2, 27, 30, 40Bits for TPX-slot . . . . . . . . . . . . . . . TPX 20, 25, 30Bits for square recessed heads. . . No 1, 2, 3Bits for hexagonal holes. . . . . . . . . mm 2, 3, 4, 5, 6, 8

Art. no. . . . . . . . . . . . . . . . 12865 -0108Teng Tools . . . . . . . . . . . . No TTMD12DNo. of pieces. . . . . . . . . . . ea. 12Combi-blade . . . . . . . . . . . PH1 x PH2Combi-blade . . . . . . . . . . . flat 4.0 mm x 5.5 mmCombi-blade . . . . . . . . . . . PH1 x 6.5 mm flatCombi-blade . . . . . . . . . . . PZ1 x PZ2Combi-blade . . . . . . . . . . . TX10 x TX15Combi-blade . . . . . . . . . . . TX20 x TX25Combi-blade . . . . . . . . . . . TX30 x TX40Combi-blade . . . . . . . . . . . hex. 3 mm x 3 mm hex with ball pointCombi-blade . . . . . . . . . . . hex. 4 mm x 4 mm hex with ball pointCombi-blade . . . . . . . . . . . hex. 5 mm x 5 mm hex with ball pointCombi-blade . . . . . . . . . . . hex. 6 mm x 6 mm hex with ball pointInsert size LxWxH . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . kg 0.25

Teng Tools Product Screwdriver tips Art. no. Pack.No 12865 qty

MD901 Handle - -0207 10PHF0140 Combi-blade PH1 x PH2 -0306 10PHF0255 Combi-blade 0.8 x 4.0 mm x 1.0 x 5.5 mm -0405 1

PHFT0365 Combi-blade PH3 x flat 1.2 x 6.5 mm -0504 1PZZ0102 Combi-blade PZ1 x PZ2 -0603 10

TXX1015 Combi-blade TX10 x TX15 -0702 1TXX2025 Combi-blade TX20 x TX25 -0801 10TXX3040 Combi-blade TX30 x TX40 -0900 1HBH0303 Combi-blade hex. 3 mm x 3 mm hex with ball point -1007 10

HBH0404 Combi-blade hex. 4 mm x 4 mm hex with ball point -1106 10HBH0505 Combi-blade hex. 5 mm x 5 mm hex with ball point -1205 10HBH0606 Combi-blade hex. 6 mm x 6 mm hex with ball point -1304 1

No 14431

No 12865

Handle

Combi-blade

Mega Drive

Teng

Too

ls

104


Teng Tools. Model ″Stubby″. Round blade of TT-MV steel.Black ergonomically designed two component handle withhanging hole.

Teng Tools. MD940 and MD941 with round blade, others withhexagonal blade for tightening with a spanner. Blade made ofTT-MV steel. Two component handle with hanging hole.

Screwdrivers - PH type

Teng Tools. Round blade of TT-MV steel. Two componenthandle with hanging hole.

Teng Tools. Blade of TT-MV steel. Two component handle withhanging hole.

Screwdrivers - flat type

Art. no. . . . . . . . . . . . . . . . 7219 -0051 -0101Teng Tools . . . . . . . . . . . . No MD947 MD948For cross heads . . . . . . . . No 1 2Blade length . . . . . . . . . . . mm 38 38Handle length . . . . . . . . . . mm 70 70Pack. . . . . . . . . . . . . . . . . . qty 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7213 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No MD928Screwdriver thickness×width . . . . . . . . . . mm 1.2×6.5Blade length . . . . . . . . . . . . . . . . . . . . . . . . mm 38Handle length . . . . . . . . . . . . . . . . . . . . . . . mm 70Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

No 7212-7209

No 7217-7218

No 7219

No 7213

Art. no. . . . . . . . . . . . 7218-0102 7217-0103 7217-0202 7217-0251 7217-0301 7217-0400Teng Tools . . . . . . . . No MD940 MD941 MD952 MD692 MD953 MD955For cross heads . . . . No 0 1 2 2 3 4Blade length . . . . . . . mm 75 75 100 400 150 200Handle length . . . . . . mm 100 105 120 120 140 170Pack. . . . . . . . . . . . . . qty 10 10 10 5 5 5

Art. no. . . . . . . . . . . . . . . . . . . 7212-0033 7212-0058 7212-0066 7212-0074 7212-0108 7212-0207 7209-0103Teng Tools. . . . . . . . . . . . . . . . No MD914 MD915 MD916 MD917 MD920 MD921 MD922Screwdriver thickness×width mm 0.4×2.5 0.5×2.5 0.6×3.5 0.8×4.0 0.5x3.0 0.5x3.0 1.0×5.5Blade design . . . . . . . . . . . . . . Round Round Round Round Round Round RoundBlade length . . . . . . . . . . . . . . mm 50 75 75 100 75 100 75Handle length . . . . . . . . . . . . . mm 100 100 100 100 100 100 105Pack. . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . 7212-0306 7209-0202 7209-0251 7209-0277 7209-0301 7209-0400Teng Tools. . . . . . . . . . . . . . . . No MD923 MD932 MD933 MD691 MD934 MD935Screwdriver thickness×width mm 1.0×5.5 1.2×6.5 1.2×6.5 1.2×6.5 1.2×8.0 1.6×10.0Blade design . . . . . . . . . . . . . . Round 6-point 6-point 6-point 6-point 6-pointBlade length . . . . . . . . . . . . . . mm 150 100 150 400 150 200Handle length . . . . . . . . . . . . . mm 110 120 130 120 140 140Pack. . . . . . . . . . . . . . . . . . . . . qty 10 10 10 5 5 5

Mega Drive

Teng Tools

105


Screwdrivers - PZ typeTeng Tools. MD960 and MD961 with round blade MD972 andMD973 with hexagonal blade for tightening with a spanner andequipped with magnetised screwdriver tip. Blade of TT-MVsteel. Black ergonomically designed two component handlewith hanging hole.

Teng Tools. Model ″Stubby″. Round blade of TT-MV steel.Two component handle with hanging hole.

Teng Tools. Set of 7 TX/TPX screwdrivers (2 standard TX and 5 with hole TPX). Forinternal TX heads. Nickel plated blades of TT-MD steel. Handle made of two componentwith hanging hole. Fit in Teng Tools tool boxes and tool trolleys.Supplied in a plastic TC tray with removable cover.

TPX Screwdrivers

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2598 -0103Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT917TXContents: 1 x MD608T . . . . . . . . . . . . . . . . . . . . . . . TX 8x75

1 x MD609T . . . . . . . . . . . . . . . . . . . . . . . TX 9x751 x MD610TP . . . . . . . . . . . . . . . . . . . . . TPX 10x1001 x MD615TP . . . . . . . . . . . . . . . . . . . . . TPX 15x1001 x MD620TP . . . . . . . . . . . . . . . . . . . . . TPX 20x1001 x MD625TP . . . . . . . . . . . . . . . . . . . . . TPX 25x1001 x MD630TP . . . . . . . . . . . . . . . . . . . . . TPX 30x100

Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.15

Art. no. . . . . . . . . . . . . . . 11193 -0053 -0103Teng Tools. . . . . . . . . . . . No MD968 MD978For cross heads . . . . . . . No 1 2Blade length . . . . . . . . . . mm 38 38Handle length . . . . . . . . . mm 70 70Pack. . . . . . . . . . . . . . . . . qty 10 10

No 7223

No 2598

No 11193

Art. no. . . . . . . . . . . . . . . . . . 7223-0055 7223-0105 12828-0104 12828-0203Teng Tools . . . . . . . . . . . . . . No MD960 MD961 MD962 MD964For cross heads . . . . . . . . . No 0 1 1 1Blade length. . . . . . . . . . . . . mm 75 75 100 250Handle length . . . . . . . . . . . mm 100 105 108 108Pack.. . . . . . . . . . . . . . . . . . . qty 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . 7223-0204 12828-0302 12828-0401 7223-0303Teng Tools . . . . . . . . . . . . . . No MD972 MD970 MD971 MD973For cross heads . . . . . . . . . No 2 2 2 3Blade length. . . . . . . . . . . . . mm 100 150 250 150Handle length . . . . . . . . . . . mm 120 108 108 140Pack.. . . . . . . . . . . . . . . . . . . qty 10 10 10 5

Mega Drive

Teng

Too

ls

106


Teng Tools. Used to magnetise screwdriver tips for holding screws, or to demagnetisetools where a magnetic force can be a hinder.

Magnetic Charger

Teng Tools. For internal square holes as per Robertson type.With nickel-plated TT-MV steel blade with ″Black-Point″ tip forlong life. Two component handle with hanging hole.

Square Screwdrivers

TPX Screwdrivers

Teng Tools. For TX and TPX-screws with tamper-proof headsWith round nickel-plated TT-MV steel blade with ″Black-Point″tip for long life. Two component handle with hanging hole.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 6060 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . No MR500Size . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 60×30×20Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

Art. no. . . . . . . . . . . . . . . . . . 14390 -0108 -0207 -0306Teng Tools . . . . . . . . . . . . . . No MD801 MD802 MD803For square recessed heads No 1 2 3For screw . . . . . . . . . . . . . . . M 6 8 10Max. head width . . . . . . . . . . mm 2.31 2.74 3.27Blade length . . . . . . . . . . . . . mm 100 100 100Handle length . . . . . . . . . . . . mm 120 120 120

No 0407

No 6060

No 14390

Type T for TX-screws

Art. no. . . . . . . . . . . . . . . . 0407 -0033 -0066 -0108 -0207 -0215 -0223Teng Tools . . . . . . . . . . . . No MD606T MD607T MD608T MD609T MD610T MD615TTX-no . . . . . . . . . . . . . . . . TX 6 TX 7 TX 8 TX 9 TX 10 TX 15Max. head width. . . . . . . . mm 1.70 1.99 2.31 2.5 2.74 3.27For screw . . . . . . . . . . . . . M 2 2.5 2.5 3 3-3.5 3.5-4Blade length . . . . . . . . . . . mm 75 75 75 75 100 100Handle length. . . . . . . . . . mm 100 100 100 100 105 105Pack. . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . 0407 -0231 -0249 -0256 -0264 -0272Teng Tools . . . . . . . . . . . . No MD620T MD625T MD627T MD630T MD640TTX-no . . . . . . . . . . . . . . . . TX 20 TX 25 TX 27 TX 30 TX 40Max. head width. . . . . . . . mm 3.86 4.43 4.99 5.52 6.65For screw . . . . . . . . . . . . . M 4-5 4.5-5 4.5-6 6-7 7-8Blade length . . . . . . . . . . . mm 100 100 100 100 100Handle length. . . . . . . . . . mm 105 120 120 120 120Pack. . . . . . . . . . . . . . . . . . qty 10 10 10 10 5

Type TP for TPX-screws with tamper-proof heads

Art. no. . . . . . . . . . . 0407 -0306 -0405 -0504 -0603 -0652 -0702 -0801Teng Tools . . . . . . . No MD610TP MD615TP MD620TP MD625TP MD627TP MD630TP MD640TPTX-no . . . . . . . . . . . . TPX 10 TPX 15 TPX 20 TPX 25 TPX 27 TPX 30 TPX 40Max. head width . . . mm 2.74 3.27 3.86 4.43 4.99 5.52 6.65For screw. . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 4.5-6 6-7 7-8Blade length . . . . . . mm 100 100 100 100 100 100 100Handle length . . . . . mm 105 105 120 120 120 120 120Pack. . . . . . . . . . . . . qty 10 10 10 10 10 10 5

Mega Drive

Teng Tools

107


Teng Tools. Set of 6 mini screwdrivers. Supplied with rack/holder for wall mounting.

Teng Tools. Set consisting of 12 mini screwdrivers and 4 mini-pliers.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Mini Screwdriver and Plier SetsTeng Tools. Set of 8 pieces. Containing one screwdriver handle and 7 x 120 mm longcombi-blades with one driver tip at each end. For slotted, crosspoint and TX heads. Supplied in a plastic case.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11812 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No MDM708For slotted heads + crosspoint heads. . . . 0.3 x 2.0 - PH00, 0.4 x 3.0 - PH0,

0.5 x 4.0 - PH1For cross heads . . . . . . . . . . . . . . . . . . . . . . No PZ0 - PZ1For TX heads . . . . . . . . . . . . . . . . . . . . . . . . No TX5 - TX7, TX6 - TX8,

TX9 - TX10No. of sets. . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6894 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MDM706Contents:Screwdriver MDM 713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.0x40Screwdriver MDM714 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.5x40Screwdriver MDM715 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3.0x40Screwdriver MDM716 Phillips. . . . . . . . . . . . . . . . . . . . . . . No 00x40Screwdriver MDM717 Phillips. . . . . . . . . . . . . . . . . . . . . . . No 0x40Screwdriver MDM718 Phillips. . . . . . . . . . . . . . . . . . . . . . . No 1x40Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10


Separate parts

Teng Tools Product Screwdriver tips Art. no. Pack.No type 11812 qty

MDM700 Handle - -0203 102912512 Combi-blade 0.3x2.0 - PH00 -0302 102912513 Combi-blade 0.4x3.0 - PH0 -0401 102912514 Combi-blade 0.5x4.0 - PH1 -0500 10

2912520 Combi-blade PZ0 - PZ1 -0609 102912535 Combi-blade TX5 - TX7 -0708 102912537 Combi-blade TX6 - TX8 -0807 102912539 Combi-blade TX9 - TX10 -0906 10

No 10445

No 11812

No 6894

Separate screwdrivers . . 6894 -0139 -0162 -0204 -0303 -0402 -0501 -0600 -0709Teng Tools . . . . . . . . . . . . . No MDM711 MDM712 MDM713 MDM714 MDM715 MDM716 MDM717 MDM718For hex holes . . . . . . . . . . . mm 2.0 2.5 - - - - - -With flat blades . . . . . . . . . mm - - 2.0 2.4 3.0 - - -For Phillips heads . . . . . . . No - - - - - 00 0 1Total length. . . . . . . . . . . . . mm 120 120 120 120 120 120 120 120Pack. . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10

Mega Drive

Teng

Too

ls

108


Bit BoxesTeng Tools. Plastic cassette containing bit holder with magnet and 6 bits (length 25 mm)with 1⁄4″gdrive.

Teng Tools. Screwdrivers with through blade and striking he-ad. The hexagonal blade allows tightening using an open-ended spanner. Two component handle.

Teng Tools. Screwdrivers with through blade and striking he-ad. The hexagonal blade allows tightening using an open-ended spanner. Two component handle.

Teng Tools. Plastic cassette containing bit holder with magnet and 9 bits (length 25 mm)with 1⁄4″gdrive.

Teng Tools. Set containing 5 screwdrivers for slotted heads and Phillipsheads. With hexagonal through blade. Two component handle.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools toolboxes and tool trolleys.

Power Thru Screwdrivers

Teng Tools. Set of 6 mini screwdrivers for internal TX heads.Supplied with rack/holder for wall mounting.

Mini Screwdrivers - TX type

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10262 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No BBX10ANo. of pieces. . . . . . . . . . . . . . . . . . . . . . . . . ea. 10Bits for slotted heads. . . . . . . . . . . . . . . . . . mm 0.6x4.5 1.0x5.5 1.2x6.5Bits for Phillips heads . . . . . . . . . . . . . . . . . No 1 2 3Bits for Pozi/Supadriv heads . . . . . . . . . . . No 1 2 3Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 10213 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . No TTXMDTDriver thick.xwidthxblade leng. . . . mm 1.4x6.5x100 1.4x8x150

1.4x10x200Phillips head x blade leng. . . . . . . . No 2x100 3x150Case size LxWxH . . . . . . . . . . . . . . mm 560x110x40Weight. . . . . . . . . . . . . . . . . . . . . . . . kg 1.27

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 10215 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . No MDM706TXFor TX heads. . . . . . . . . . . . . . . . . . . TX- 6 7 8 9 10 15Blade length. . . . . . . . . . . . . . . . . . . . mm 25Total length . . . . . . . . . . . . . . . . . . . . mm 120Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . sts 10

Art. no. . . . . . . . . . . . . . . 10183 -0107 -0206 -0305Teng Tools . . . . . . . . . . . No MDT932 MDT934 MDT935Driver thickness x width mm 1.4x6.0 1.4x8.0 1.4x9.5Blade length . . . . . . . . . . mm 100 150 200Handle length. . . . . . . . . mm 120 140 140Pack. . . . . . . . . . . . . . . . . qty 10 5 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10261 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No BBX7ANo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 7Bits for slotted heads . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5 1.2x6.5Bits for Phillips heads . . . . . . . . . . . . . . . . . . . . . . . No 1 2Bits for Pozi/Supadriv heads . . . . . . . . . . . . . . . . . No 1 2Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . 10184 -0106 -0205Teng Tools . . . . . . . . . . No MDT952 MDT953For cross heads . . . . . . No 2 3Blade length . . . . . . . . . mm 100 150Handle length . . . . . . . . mm 120 140Pack. . . . . . . . . . . . . . . . qty 10 5

No 10261

No 10262

No 10184

No 10183

No 10213

No 10215

Separate screwdrivers. . . . . . . 10215 -1008 -1107 -1206 -1305 -1404 -1503Teng Tools . . . . . . . . . . . . . . . . . . No MDM806 MDM807 MDM808 MDM809 MDM810 MDM815For TX heads . . . . . . . . . . . . . . . . TX- 6 7 8 9 10 15For screw . . . . . . . . . . . . . . . . . . . M 2 2.5 2.5 3 3-3.5 3.5-4Overall length. . . . . . . . . . . . . . . . mm 120 120 120 120 120 120Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10 10

Mega Drive

Teng Tools

109


Teng Tools. Combined sockets/bit set. Contains 7 1⁄4″ 6-point sockets. 10 bits and bitholder, adaptor 1⁄4″g - 1⁄4″ ❒ and a bit ratchet handle.Supplied in plastic case.

Teng Tools. Socket and bit set containing 19 pieces. Contains 6 x1⁄4 ″ sockets, 10 x bits fordifferent screw heads, magnetic bit holder, hex adapter 1⁄4″ g-1⁄4″ ❒ and a mini ratchethandle.

Teng Tools. Plastic cassette containing bit holder with magnet and 9 bits (length 25 mm) 1⁄4″g-drive.

Teng Tools. Plastic cassette containing bit holder with magnet and 6 bits (length 25 mm)with 1⁄4″gdrive for internal TX-heads.

Teng Tools. Plastic cassette containing bit holder with magnet and 9 bits (length 25 mm)with 1⁄4″gdrive.

Bit Boxes

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14395 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No BBX10PHZNo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 10Bits for Phillips heads . . . . . . . . . . . . . . . . . . . . . . No 2 (5)Bits for Pozidriv heads . . . . . . . . . . . . . . . . . . . . . No 2 (4)Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10263 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No BBX7TXANo. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 7Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20

25 30 40Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 12845 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No BBX20No. of pieces. . . . . . . . . . . . . . . . . . . . . . ea. 20Sockets with 1⁄4″ ❒-drive . . . . . . . . . . . . mm 5.5 6 7 8 10 12 13Bits for slotted heads . . . . . . . . . . . . . . . mm 0.6x4.5 0.8x5.5 1.2x6.5Bits for Phillips heads . . . . . . . . . . . . . . No 1 2Bits for Pozidriv heads. . . . . . . . . . . . . . No 1 2Bits for TX-heads . . . . . . . . . . . . . . . . . . No TX10 TX15 TX20Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . 14397 -0101Teng Tools . . . . . . . . . . . . . . . . . . . No BBX10TXNo of parts . . . . . . . . . . . . . . . . . . . qty 10Bits for TX heads . . . . . . . . . . . . . . TX 10 (2), 15 (2), 20 (2),

25 (2), 30 (1)Pack. . . . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13193 -0109Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . No BBX19No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 19Socket’s dim (hexagon) . . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13Bits for slotted heads . . . . . . . . . . . . . . . . . . . . mm 4.5 5.5 6.5Bits for Phillips heads. . . . . . . . . . . . . . . . . . . . No 1 2Bits for Pozidriv heads . . . . . . . . . . . . . . . . . . . No 1 2Bits for int. hex holes . . . . . . . . . . . . . . . . . . . . mm 4 5 6Case dim. LxWxH. . . . . . . . . . . . . . . . . . . . . . . mm 100x66x30Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.22Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

No 12845

No 13193

No 14397

No 10263

No 14395

Mega Drive

Teng

Too

ls

110


Bit BoxesTeng Tools. Set containing bit holder with quick chuck, hex adaptor and the 26 mostcommon bits. All bits with 1⁄4″-g drive.Supplied in plastic case.

Teng Tools. Blade designed with 1⁄4″ hex socket with magnet that holdsthe bits as well as the screw. Hex chrome vanadium steel blade. Twocomponent handle with hanging hole.

Teng Tools. Set includes magnetic bit holder, hex adapter, forged ratcheting bit driver andthe 26 most common bits. All bits with 1⁄4″-g drive. Supplied in plastic case.

Teng Tools. Set containing ratchet handle with 1⁄4″-g drive for bits.Adjustable for right and left-hand action. Supplied complete with 11different bits.

Bit Drivers

Mini Bit RatchetTeng Tools. 1⁄4″ ratcheting bit driver and 8 mm 12 point ring spanner.Hardened. Manufactured of chrome vanadium steel. Satin finish.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 10024 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . No MD900For bits with drive . . . . . . . . . . . . . . . . g-inch 1⁄4Blade length. . . . . . . . . . . . . . . . . . . . . mm 100Handle length . . . . . . . . . . . . . . . . . . . mm 120Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0477 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No SD511Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4-gRatchet handle length. . . . . . . . . . . . . . . . mm 100Bits for slotted heads. . . . . . . . . . . . . . . . . mm 0.4×4 1.0×5.5Bits for Phillips-heads . . . . . . . . . . . . . . . . No 1 2Bits for Pozi/Supadriv heads . . . . . . . . . . No 1 2Bits for TX-heads. . . . . . . . . . . . . . . . . . . . TX 10 15 20Bits for hex holes . . . . . . . . . . . . . . . . . . . . mm 5 6Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 30

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11834 -0108Teng Tools . . . . . . . . . . . . . . . . . . . No 1400BWith bit drive . . . . . . . . . . . . . . . . . . inch 1⁄4″Ring spanner. . . . . . . . . . . . . . . . . . mm 8Length . . . . . . . . . . . . . . . . . . . . . . . mm 90Pack. . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11860 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No BBX29No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 29Bits for slotted heads . . . . . . . . . . . . . . . . . . . . . . . mm 0.6x4.5 0.8x5.5 1.2x6.5Bits for Phillips heads . . . . . . . . . . . . . . . . . . . . . . . No 1 2 3Bits for Pozidriv/Supadriv cross heads . . . . . . . . No 1 2 3Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25 30 40Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . . . . . . TPX 20 25 30Bits for Robertson heads . . . . . . . . . . . . . . . . . . . . No 1 2 3Bits for hex holes . . . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 6Grabber-bits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 2 (2 pc)Bit holder, length . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 50Hex adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch ❒-1⁄4″-1⁄4″-gRatcheting bit driver . . . . . . . . . . . . . . . . . . . . . . . . g1⁄4″ - 8 mmWeight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.2Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12199 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No BBX28No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 28Bits for slotted heads . . . . . . . . . . . . . . . . . . . . . mm 0.6x4 0.8x5.5 1.0x6.5Bits for Phillips-heads. . . . . . . . . . . . . . . . . . . . . No 1 2 3Bits for Pozidriv/Supadriv heads. . . . . . . . . . . . No 1 2 3Bits for TX heads. . . . . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25 30 40Bits for TX heads. . . . . . . . . . . . . . . . . . . . . . . . . TPX 20 25 30Bits for Robertson heads . . . . . . . . . . . . . . . . . . No 1 2 3Bits for hex holes. . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 6Bits for Grabber heads . . . . . . . . . . . . . . . . . . . . No 2 (2)Bit holder 1⁄4″-g, length . . . . . . . . . . . . . . . . . . . mm 50Hex adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4″-g-1⁄4″❒Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

No 11860

No 11834

No 12199

No 0477

No 10024

Mega Drive

Teng Tools

111


Teng Tools. Set of 74 pieces. Consists of a bit ratchet screwdriver, 6″ flexible extension, 4″extension bar, external square 1⁄4″x1⁄4″ hexagonal external adaptor, internal square 1⁄4″x1⁄4″hexagonal internal adaptor and 69 bits.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Hose Clip Drivers

Teng Tools. Bit ratchet driver with two component handle and 6 screw-driver bits (two for slotted heads, two for Phillips heads, 2 for Posidriveheads) stored in the handle.

Teng Tools. With flexible, steel spiral. Socket with 6-point ope-nings - adapted to hose clamps. Two-component handle.

Teng Tools. Blade designed with 1⁄4″-hex socket with recessed magnetthat holds the bits as well as the screw. Plastic handle with space for bits.Supplied with 6 bits for internal TX heads.

Teng Tools. Blade designed with 1⁄4″-hex socket with recessed magnetthat holds the bits as well as the screw. Plastic handle with space for bits.Supplied with six bits; two for slotted heads, two for Phillips heads andtwo for Pozidriv heads. Rotating flip lid.

Bit Drivers

Art. no. . . . . . . . . . . . . . . . 11772 -0102Teng Tools . . . . . . . . . . . . No MD503ASize 6-point . . . . . . . . . . . . mm 7Total length . . . . . . . . . . . . mm 270Pack . . . . . . . . . . . . . . . . . . qty 10

Art. no.. . . . . . . . . . . . . . . . . . 10191 -0107Teng Tools. . . . . . . . . . . . . . . No MD907TXFor bits with drive . . . . . . . . . ginch 1⁄4Blade length. . . . . . . . . . . . . . mm 100Handle length . . . . . . . . . . . . mm 120Bits for TX heads . . . . . . . . . TX- 10 15 20 25 27 30Pack.. . . . . . . . . . . . . . . . . . . . set 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . 7257 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . No MD907For bits with drive . . . . . . . . . . . . . . . . g-inch 1⁄4Blade length. . . . . . . . . . . . . . . . . . . . . mm 100handle length. . . . . . . . . . . . . . . . . . . . mm 115Bits for slotted heads . . . . . . . . . . . . . mm 1.2×5 1.4×7Bits for Phillips-heads . . . . . . . . . . . . No 1 2Bits for Pozidriv-heads. . . . . . . . . . . . No 1 2Förp. . . . . . . . . . . . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 14432 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . No MD907RBits for slotted heads . . . . . . . . . . . . . mm 1.2x5, 1.4x7Bits for Phillip heads . . . . . . . . . . . . . . No 1, 2Bits for Pozidriv heads . . . . . . . . . . . . No 1, 2Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14403 -0103Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . No TTMD74Bits for slotted heads . . . . . . . . . . . . . . . . . . mm 0.6x3.5, 0.6x4.5, 0.8x4.0,

0.8x5.5, 1.0x5.5, 1.2x5.0, 1.2x6.5, 1.4x7.0, 1.6x8.0

Bits for Phillips heads. . . . . . . . . . . . . . . . . . No 1 (4), 2 (7), 3 (1)Bits for Pozidriv heads . . . . . . . . . . . . . . . . . No 1 (4), 2 (7), 3 (1)Bits for hex holes . . . . . . . . . . . . . . . . . . . . . mm 2, 3, 4, 5, 6, 8Bits for TX-heads . . . . . . . . . . . . . . . . . . . . . No 6, 7, 8, 9, 10, 15, 20 (3),

25 (x 3), 27, 30, 40Bits for TPX-slot . . . . . . . . . . . . . . . . . . . . . . No 10, 15, 20 (2), 25 (2),

27, 30, 40Bits for square recessed heads . . . . . . . . . No 1, 2, 3Bits for Grabber crosspoint tip . . . . . . . . . . No 2 (3)Insert size LxWxH. . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.74

No 11772

No 14403

No 14432

No 10191

No 7257

Mega Drive

Teng

Too

ls

112


Hose Clip DriversTeng Tools. With flexible, steel spiral. Double socket with 6 and7 mm 6-point openings - adapted for hose clips. Two componenthandle.

Teng Tools. Standard bits for Phillips heads. With 1⁄4″-g-drive.

Bits - PH type

Teng Tools. Long bits for Phillips heads. With 1⁄4″-g-drive.

Bits - flat type

Teng Tools. Long bits for slotted heads. With 1⁄4″-g-drive.

Teng Tools. Standard bits for slotted heads. With 1⁄4″-g-drive.

Art. no. 3-pack . . . . . . . . 10606 -0106 -0205 -0304Teng Tools . . . . . . . . . . . . No PH2500103 PH2500203 PH2500303Phillips-head . . . . . . . . . . No 1 2 3Length . . . . . . . . . . . . . . . . mm 25 25 25Number of bits per. . . . . . pack. 3 3 3Quantity . . . . . . . . . . . . . . frp 10 10 10

Ditto 10-pack . . . . . . . . . 10606 -0403 -0502 -0601Teng Tools . . . . . . . . . . . . No PH2500110 PH2500210 PH2500310Number of bits per. . . . . . pack. 10 10 10Quantity . . . . . . . . . . . . . . frp 10 10 10

Length 50 mm

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 6818 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . No MD503Size 6-point . . . . . . . . . . . . . . . . . . . . . . mm 6 and 7Total length . . . . . . . . . . . . . . . . . . . . . . mm 260Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Spare socket 6/7 mm. . . . . . . . . . . . . 6118 -0207Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

No 10605

Art. no. . . . . . . . . . . . . . . . 10607 -0105 -0204 -0303Teng Tools . . . . . . . . . . . . No PH5000103 PH5000203 PH5000303Phillips head. . . . . . . . . . . No 1 2 3Number of bits per. . . . . . pack 3 3 3Quantity . . . . . . . . . . . . . . frp 1 1 10

Length 70 mm

No 10604

No 6818

Art. no.. . . . . . . . . . . . . . . . . . . . . 10607 -0402 -0501Teng Tools. . . . . . . . . . . . . . . . . . No PH7000102 PH7000202Phillips head . . . . . . . . . . . . . . . . No 1 2Number of bits per . . . . . . . . . . . pack. 2 2Quantity . . . . . . . . . . . . . . . . . . . . frp 10 10

No 10606

Length 50 mm

Art. no. 3-pack . . . . . . . 10604 -0108 -0207 -0306 -0405 -0504 -0603 -0702Teng Tools. . . . . . . . . . . Nr FL2506A03 FL2506B03 FL2508A03 FL2508B02 FL2510A03 FL2512A03 FL2516A03Driver thickness.xwidth mm 0.6x3.5 0.6x4.5 0.8x4.0 0.8x5.5 1.0x5.5 1.2x6.5 1.6x8.0Length. . . . . . . . . . . . . . . mm 25 25 25 25 25 25 25Number of bits per . . . . pack. 3 3 3 3 3 3 3Quantity . . . . . . . . . . . . . frp 10 10 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . 10605 -0107 -0206 -0305 -0404 -0503Teng Tools . . . . . . . . . . . . . . . . No FL5006A03 FL5008A3 FL5008B03 FL5010A03 FL5012A03Driver thickness×width . . . . . . mm 0.6x3.5 0.8x4.0 0.8x5.5 1.0x5.5 1.2x6.5Number of bits per . . . . . . . . . . pack. 3 3 3 3 3Quantity . . . . . . . . . . . . . . . . . . . frp 10 10 10 10 10

Length 70 mm

No 10607

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 10605 -1006 -1105 -1204 -1303Teng Tools . . . . . . . . . . . . . . . . . . . . No FL7006A02 FL7008A02 FL7008B02 FL7010A02Driver thickness×width . . . . . . . . . . mm 0.6x3.5 0.8x4.0 0.8x5.5 1.0x5.5Number of bits per . . . . . . . . . . . . . . pack. 2 2 2 2Quantity . . . . . . . . . . . . . . . . . . . . . . . frp 10 10 10 10

Mega Drive

Teng Tools

113


Bits - PZ typeTeng Tools. Standard bits for Pozidriv and Supadriv heads. With 1⁄4″-g-drive.

Teng Tools. Long hex bits. With 1⁄4″-g-drive.

Teng Tools. Long bits for Pozidriv and Supadriv heads. With 1⁄4″-g-drive design 4.

Teng Tools. Hex type bits.Suitable bit sockets see 10167 page 0000.

Teng Tools. Standard bits for hex holes. With 1⁄4″-g-drive.

Bits - hex type

Length 50 mm

Art. no. 3-pack . . . . . . . . 10608 -0104 -0203 -0302Teng Tools . . . . . . . . . . . . No PZ2500103 PZ2500203 PZ2500303Pozidriv head . . . . . . . . . . No 1 2 3Number of bits per . . . . . . pack. 3 3 3Quantity . . . . . . . . . . . . . . . frp 10 10 10

Ditto 10-pack. . . . . . . . . . 10608 -1003 -1102 -1201Teng Tools . . . . . . . . . . . . No PZ2500110 PZ2500210 PZ2500310Number of bits per . . . . . . pack. 10 10 10Quantity . . . . . . . . . . . . . . . frp 10 10 10

Length 50 mm

Art. no. . . . . . . . . . . 10611 -0109 -0208 -0307 -0406Teng Tools . . . . . . . No HEX5000403 HEX5000503 HEX5000603 HEX5000803For hex holes . . . . . mm 4 5 6 8Number of bits per. pack. 3 3 3 3Quantity . . . . . . . . . frp 10 10 10 10

Art. no. . . . . . . . . . . . . . . . 10609 -0103 -0202 -0301Teng Tools . . . . . . . . . . . . No PZ5000103 PZ5000203 PZ5000303Pozidriv head . . . . . . . . . . No 1 2 3Number of bits per . . . . . . pack. 3 3 3Quantity . . . . . . . . . . . . . . . frp 10 10 10

Length 70 mm

No 10610

No 10186

Art. no. . . . . . . . . . . . . . . . . . . . . . 10609 -0400 -0509Teng Tools . . . . . . . . . . . . . . . . . . No PZ7000102 PZ7000202Pozidriv . . . . . . . . . . . . . . . . . . . . . No 1 2Number of bits per. . . . . . . . . . . . pack. 2 2Quantity . . . . . . . . . . . . . . . . . . . . frp 10 10

Art. no. 3-pack. . . . 10610 -0100 -0209 -0308 -0407 -0506 -0605Teng Tools. . . . . . . . No HEX2500203 HEX2500303 HEX2500403 HEX2500503 HEX2500603 HEX2500803For hex holes . . . . . mm 2 3 4 5 6 8Length . . . . . . . . . . . mm 25 25 25 25 25 25Number of bits per . pack. 3 3 3 3 3 3

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10186 -0104 -0203 -0302 -0401 -0500Teng Tools 2107 For hex holes . . . . . . . . . . . . . . . . . . mm 5 6 7 8 9Drive g. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 10 10 10 10 10Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 40 40 40 40 40Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10


No 10608

No 10611

No 10609

Mega Drive

Teng

Too

ls

114


Bits - hex type

Teng Tools. For internal TX heads. See 10167 for suitable bitsocket page 0000.

Teng Tools. Long hex bits.Suitable bit sockets see 10167 page 0000.

Teng Tools. Standard bits for internal TX heads. With 1⁄4″-g-drive.

Bits - TX type

No 10188

No 10612

No 10187



Art. no. 3-pack. . . . . . 10612 -0108 -0207 -0306 -0405 -0504 -0603Teng Tools . . . . . . . . . No TX2500603 TX2500703 TX2500803 TX2500903 TX2501003 TX2501503TX heads . . . . . . . . . . . No TX6 TX7 TX8 TX9 TX10 TX15Max. head width . . . . . mm 1.70 1.99 2.31 2.50 2.79 3.27For screw. . . . . . . . . . . M 2 2.5 2.5 3 3-3.5 3.5-4Length . . . . . . . . . . . . . mm 25 25 25 25 25 25Number of bits per . . . pack. 3 3 3 3 3 3Quantity . . . . . . . . . . . . frp 10 10 10 10 10 10

Art. no. 3-pack. . . . . . 10612 -0702 -0801 -0900 -1007 -1106Teng Tools . . . . . . . . . No TX250203 TX2502503 TX2502703 TX2503003 TX250403TX heads . . . . . . . . . . . No TX20 TX25 TX27 TX30 TX40Max. head width . . . . . mm 3.86 4.43 4.99 5.52 6.65For screw. . . . . . . . . . . M 4-4.5 4.5-5 4.5-6 6-7 7-8Length . . . . . . . . . . . . . mm 25 25 25 25 25Number of bits per . . . pack. 3 3 3 3 3Quantity . . . . . . . . . . . . frp 10 10 10 10 10

Art. no. . . . . . . . . . . . . 10187 -0103 -0202 -0301 -0400 -0509 -0608 -0707 -0806 -0905 -1002Teng Tools 2207 . . . . No TX 20 TX 25 TX 27 TX 30 TX 40 TX 45 TX 50 TX 55 TX 60 TX 70Max. head width. . . . . mm 3.86 4.43 4.99 5.52 6.65 7.82 8.83 11.25 13.25 15.25For screw . . . . . . . . . . M 4-5 4.5-5 4.5-6 6-7 7-8 8-10 10 12 14 16Drive g . . . . . . . . . . . . mm 10 10 10 10 10 10 10 10 12 12Length . . . . . . . . . . . . . mm 40 40 40 40 40 40 40 40 40 40Pack. . . . . . . . . . . . . . . qty 10 10 10 10 10 10 10 10 10 10

Mega Drive

Teng Tools

115


Bits - TX type

Teng Tools. TX-bits with hole. For tamper proof screws. For internal TX heads. With1⁄4″-g-drive.

Bits - TPX type

Teng Tools. Long bits for internal TX heads. With 1⁄4″-g-drive.

Teng Tools. For internal TX-heads. Suitable bitsocket see 10167 page 0000.

No 10613

No 10189

No 10614

Length 50 mm

Art. no. . . . . . . . . . . . . 10189 -0101 -0200 -0309 -0408 -0507 -0606 -0705 -0804 -0903 -1000Teng Tools 2208 . . . . No TX 20 TX 25 TX 27 TX 30 TX 40 TX 45 TX 50 TX 55 TX 60 TX 70Max. head width. . . . . mm 3.86 4.43 4.99 5.52 6.65 7.82 8.83 11.22 13.25 15.55For screw . . . . . . . . . . M 4-5 4.5-5 4.5-6 6-7 7-8 8-10 10 12 14 16Drive g . . . . . . . . . . . . mm 10 10 10 10 10 10 10 10 12 12Length . . . . . . . . . . . . . mm 75 75 75 75 75 75 75 75 75 75

Art. no. 3-pack . . . . . . . . . . 10614 -0106 -0205 -0304 -0403Teng Tools . . . . . . . . . . . . . . No TPX2501003 TX2501503 TPX2502003 TPX2502503TX head. . . . . . . . . . . . . . . . . No TPX10 TPX15 TPX20 TX 25Max. head width. . . . . . . . . . mm 2.79 3.27 3.86 4.43For screw . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-4.5 4.5-5Length . . . . . . . . . . . . . . . . . . mm 25 25 25 25Number of bits per . . . . . . . . pack. 3 3 3 3Quantity. . . . . . . . . . . . . . . . . frp 10 10 10 10

Art. no. 3-pack . . . . . . . . . . 10614 -0502 -0601 -0700Teng Tools . . . . . . . . . . . . . . No TPX2502703 TPX2503003 TPX2504003TX head. . . . . . . . . . . . . . . . . No TPX27 TPX30 TPX40Max. head width. . . . . . . . . . mm 4.99 5.52 6.65For screw . . . . . . . . . . . . . . . M 4.5-6 6-7 7-8Length . . . . . . . . . . . . . . . . . . mm 25 25 25Number of bits per . . . . . . . . pack. 3 3 3Quantity. . . . . . . . . . . . . . . . . frp 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . 10613 -0107 -0206 -0305 -0404Teng Tools . . . . . . . . . . . . . . . . No TX5000803 TX5001003 TX5001503 TX5002003TX head. . . . . . . . . . . . . . . . . . . No TX8 TX10 TX15 TX20Max. head width. . . . . . . . . . . . mm 2.31 2.79 3.27 3.86For screw . . . . . . . . . . . . . . . . . M 2.5 3-3.5 3.5-4 4-4.5Number of bits per . . . . . . . . . . pack. 3 3 3 3Quantity. . . . . . . . . . . . . . . . . . . frp 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . 10613 -0503 -0602 -0701Teng Tools . . . . . . . . . . . . . . . . No TX5002503 TX5002703 TX5003003TX head. . . . . . . . . . . . . . . . . . . No TX25 TX27 TX30Max. head width. . . . . . . . . . . . mm 4.43 4.99 5.52For screw . . . . . . . . . . . . . . . . . M 4.5-5 4.5-6 6-7Number of bits per . . . . . . . . . . pack. 3 3 3Quantity. . . . . . . . . . . . . . . . . . . frp 10 10 10

Length 70 mm

Art. no.. . . . . . . . . . . . . . . . . . . . 10613 -0800 -0909 -1006 -1105Teng Tools. . . . . . . . . . . . . . . . . No TX7001002 TX7001502 TX700202 TX7002502TX head . . . . . . . . . . . . . . . . . . . No TX10 TX15 TX20 TX25Max. head width . . . . . . . . . . . . mm 2.79 3.27 3.86 4.43For screw . . . . . . . . . . . . . . . . . . M 3-3.5 3.5-4 4-4.5 4.5-5Number of bits per . . . . . . . . . . pack. 2 2 2 2Quantity . . . . . . . . . . . . . . . . . . . frp 10 10 10 10

Mega Drive

Teng

Too

ls

116


Teng Tools. For use with standard impact sockets, etc. Designed for attachment inmachines according to drive 4.

Bit Adaptors

Teng Tools. Bit holder with quick release chuck. Recessed magnet that holds the bits aswell as the screw. With 1⁄4″-g-drive.

Nut Setters

Teng Tools. Recessed magnet holds the bits as well as the screw. With 1⁄4″-g-drive.

Bit Holders

Teng Tools. With machined throat. For Phillips heads according to the American stan-dard (shallower hole). Also fits in heads according to the European standard. with 1⁄4″g-drive.

GR bits

Bits - square typeTeng Tools. Standard bits for Robertson square recessed heads. With 1⁄4″-g-drive.

Teng Tools. For screws, not bits. Hex opening with recessed magnetor ring that holds the screw.

Art. no. . . . . . . . . . . . . . . . . . . . . 10618 -0102 -0201 -0300Teng Tools . . . . . . . . . . . . . . . . . No ACCSDA1414 ACCSDA1438 ACCSDA1412Drive design. (machine drive) . g-inch 4-1⁄4 4-1⁄4 4-1⁄4Square drive . . . . . . . . . . . . . . . ❒-inch 1⁄4 3⁄8 1⁄2Total length . . . . . . . . . . . . . . . . mm 50 50 50Quantity . . . . . . . . . . . . . . . . . . . frp 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10617 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No ACC50CBH01Design (machine drive) . . . . . . . . . . . . . . . . . . 4For bits g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 50Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . frp 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . 10616 -0104 -0203Teng Tools . . . . . . . . . . . . . . . . . . . No ACC50MBH01 ACC70MBH01For bits . . . . . . . . . . . . . . . . . . . . . . g 1⁄4″ 1⁄4″Design (machine drive) . . . . . . . . 4 4Length. . . . . . . . . . . . . . . . . . . . . . . mm 50 70Quantity . . . . . . . . . . . . . . . . . . . . . frp 10 10

Art. no. 3-pack . . . . . . . . . . . . . 10615 -0105 -0204 -0303Teng Tools. . . . . . . . . . . . . . . . . Nr ROB2500103 ROB2500203 ROB2500303Max. head width . . . . . . . . . . . . mm 2.31 2.74 3.27For square recessed heads . . No 1 2 3For screw . . . . . . . . . . . . . . . . . . M 6 8 10Length . . . . . . . . . . . . . . . . . . . . mm 25 25 25Number of bits per . . . . . . . . . . pack. 3 3 3Quantity . . . . . . . . . . . . . . . . . . . frp 10 10 10

Art. no. 10-pack. . . . . . . . . . . . . . . . . . . . 10628 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No GR25002010Phillip cross-head . . . . . . . . . . . . . . . . . . . No 2Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 25Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . frp 10

Ditto 100-pack . . . . . . . . . . . . . . . . . . . . . 10628 -1009Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No GR250020100Phillips cross head . . . . . . . . . . . . . . . . . . No 2Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 25

No 11173

No 10618

No 10617

No 10616

No 10628

No 10615

Art. no. . . . . . . . . . . . . . . . . . . . . . 11173 -0107 -0305 -0354 -0503 -0602Teng Tools . . . . . . . . . . . . . . . . . . No NS45108M NS45506M NS4507M NS4508M NS4508RType . . . . . . . . . . . . . . . . . . . . . . . magnetic magnetic magnetic magnetic ringSize for screws . . . . . . . . . . . . . . 1⁄4″ 6 mm 7 mm 8 mm 8 mmHolder drive (design 4). . . . . . . . g inch 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4Length. . . . . . . . . . . . . . . . . . . . . . mm 45 45 45 45 45Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 10 10

Mega Bite

Teng Tools

117


Teng Tools. Set of 4 pliers: water pump pliers, combination pliers, sidecutters and flat nose pliers. Made of chrome vanadium steel. Plasticcovered handles.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools toolboxes and tool trolleys.

Plier Sets

Teng Tools. Set of 4 pliers, water pump pliers, combination pliers, sidecutters and flat nose pliers. Made of chrome vanadium steel. Withergonomically designed two component handle sleeves. Supplied in a plastic TC tray with removable cover. Fits in Teng Tools toolboxes and tool trolleys.

Teng Tools. Rack holding four pairs of pliers with two component slee-ves, one pair of slip joint pliers, combination pliers, side cutters and flatnose pliers.Supplied on wall rack.

Mega Bite Pliers

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . 12833 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . No WRMB04Contents:Slip joint pliers 10″ . . . . . . . . . . . . . . . No MB481-10TCombination pliers 7″. . . . . . . . . . . . . No MB452-7TSide cutters 6″. . . . . . . . . . . . . . . . . . . No MB441-6TFlat nose pliers 8″. . . . . . . . . . . . . . . . No MB461-8TPack.. . . . . . . . . . . . . . . . . . . . . . . . . . . sts 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 10982 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . No TT440-TContents:Water pump pliers 10″ . . . . . . . . . . . . No MB481-10TCombination pliers 7″ . . . . . . . . . . . . . No MB452-7TSide cutters 6″ . . . . . . . . . . . . . . . . . . . No MB441-6TFlat nose pliers 8″ . . . . . . . . . . . . . . . . No MB461-8TCase size LxWxH . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Overall length

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 4428 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . No TT440Contents:Water pump pliers10″ . . . . . . . . . . . . . No MB481Combination pliers 7″ . . . . . . . . . . . . . No MB451Sied cutters 6″ . . . . . . . . . . . . . . . . . . . No MB441Flat nose pliers 8″ . . . . . . . . . . . . . . . . No MB462Case size LxWxH. . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

No 12833

No 10982

No 4428

The overall lengths of Mega Bite pli-ers are designed to give the maxi-mum leverage to suit the specificplier.

Length

Cutting capacity

The cutting edges on Mega Bite pli-ers are specifically angled to suit dif-ferent materials and applications.

Gripping capacity

The grupping capacity shown repre-sents the range of sizes that MegaBite pliers are designed to grip.

Mega Bite

Teng

Too

ls

118


Mega Bite PliersPlier Sets

Teng Tools. Set of 5 pliers including 41⁄2″ side cutters, 7″ side cutters, 7″combination pliers , 8″ flat nose pliers and 10″ water pump pliers. Thepliers have polished heads and plastic covered handles.Supplied in a tool roll.

Side CuttersTeng Tools. Single joint. Polished head. With ergonomically designedtwo component handle sleeves.

Teng Tools. For copper and aluminium cables. Two cutting positions.One-hand function with pinch guard. With ergonomically designed twocomponent handle sleeves.

Cable Cutters

Teng Tools. Single joint. Polished head. Equipped with plastic coveredhandles.Type MB442 with hardened cutting edges for e.g. piano wire.

Teng Tools. Single joint. Polished head. Hardened cutting edges for e.g.piano wire. With ergonomically designed two component handle slee-ves.

Artnr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10976 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No MB444-8TLength . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 200Cuts copper cable max. . . . . . . . . . . . . . mm2 95For cable diameter . . . . . . . . . . . . . . . . . mm 14Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11343 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No 445WContents:Side cutters 41⁄2″ . . . . . . . . . . . . . . . . . . . . . Nr MB441Side cutters 7″ . . . . . . . . . . . . . . . . . . . . . . . No MB441Combination pliers 7″ . . . . . . . . . . . . . . . . . No MB451Flat nose pliers 8″ . . . . . . . . . . . . . . . . . . . . No MB461Water pump pliers 10″ . . . . . . . . . . . . . . . . No MB481

Art. no.. . . . . . . . . . . . . . 10974 -0100 -0209Teng Tools . . . . . . . . . . . No MB441-5T MB441-6TLength. . . . . . . . . . . . . . . mm 125 150Cuts piano wire . . . . . . . mm 0.5 0.5Cuts steel wire. . . . . . . . mm 1.5 1.5Pack.. . . . . . . . . . . . . . . . qty 12 6

Art. no. . . . . . . . . . . . 7421 -0154 -0105 -0170Teng Tools . . . . . . . . No MB441-5 MB441-6 MB 442-6Length . . . . . . . . . . . . mm 125 150 155Cuts piano wire . . . . mm 0.5 0.5 2.0Cuts steel wire . . . . . mm 1.5 1.5 2.5Pack. . . . . . . . . . . . . . qty 12 6 6

Art. no. . . . . . . . . . . . 7421 -0188 -0204Teng Tools . . . . . . . . No MB442-7 MB442-8Length . . . . . . . . . . . . mm 185 200Cuts piano wire . . . . mm 2.0 2.5Cuts steel wire . . . . . mm 2.5 4.0Pack. . . . . . . . . . . . . . qty 6 6

No 10975

No 7421

Art. no.. . . . . . . . . . . . . . . . 10975 -0109 -0158 -0208 -0307Teng Tools. . . . . . . . . . . . . No MB442-6T MB442-7T MB442-8T MB442-8T

curved head 15°Length . . . . . . . . . . . . . . . . mm 150 150 200 200Cuts piano wire . . . . . . . . . mm 2.0 2.0 2.5 2.5Cuts steel wire . . . . . . . . . mm 2.5 2.5 3.0 3.0Pack. . . . . . . . . . . . . . . . . . qty 6 6 6 6

No 10974

No 11343

No 10976

Mega Bite

Teng Tools

119


Mega Bite PliersCable CuttersTeng Tools. Heavy duty cable cutter. Drop forged. Chrome molydeniumalloy steel blades are hardened to help maintain cutting esdges. Chmpo-und leverage increases cutting power while reducing cutting effort. Newquick and simple spring-free automatic latch design (one hand release)provides safety and convenience. Cutts the following s: Copper andaluminium electric cables up to number 2AWG (14 mm2) diameter HRC60-62.

Teng Tools. Single joint. Polished head. Long, 45° angled jaws. Serra-ted grip surface. With ergonomically designed two component handlesleeves.

Combination PliersTeng Tools. Single joint. With pipe grip and serrated grip surfaces.Plastic covered handles.

Teng Tools. Single joint. Polished head. Long, straight jaws. Serratedgrip surface. Plastic covered handles.MB463-8 as MB461 but with angled (45°) jaws.

Teng Tools. Single joint. Polished head. Long, straight jaws. Serratedgrip surface. With ergonomically designed two component handle slee-ves.

Teng Tools. Power-combi-pliers.Single joint. With pipe grip and serra-ted grip surfaces. With ergonomically designed two component handlesleeves.

Long Nose Pliers

Teng Tools. High leverage combination pliers.Single joint. With pipegrip and serrated grip surfaces. Plastic covered handles.

Art. no. . . . . . . . . . . . . . . . . . . . . 10979 -0105Teng Tools . . . . . . . . . . . . . . . . . No MB463-8TLength . . . . . . . . . . . . . . . . . . . . . mm 200Length of nose . . . . . . . . . . . . . . mm 65Pack. . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no.. . . . . . . . . . . 7423 -0053 -0103 -0202Teng Tools. . . . . . . . No MB461-6 MB461-8 MB463-8Length . . . . . . . . . . . mm 150 200 200Length of nose . . . . mm 55 65 65Pack.. . . . . . . . . . . . . qty 6 6 6

Art. no.. . . . . . . . . . . 10978 -0106 -0205Teng Tools. . . . . . . . No MB461-6T MB461-8TLength . . . . . . . . . . . mm 150 200Nose length . . . . . . . mm 55 65Pack. . . . . . . . . . . . . qty 6 6

Art. no. . . . . . . . . . . . . . . . 7419 -0059 -0109Teng Tools . . . . . . . . . . . . No MB 452-7 MB 452-8Length . . . . . . . . . . . . . . . . mm 175 200Cuts piano wire . . . . . . . . mm 2.0 2.2Max. cable dia. . . . . . . . . . mm 11.5 13Pack. . . . . . . . . . . . . . . . . . qty 6 6

Art. no. . . . . . . . . . 10977 -0107 -0206 -0305Teng Tools . . . . . . No MB452-6T MB452-7T MB452-8TLength . . . . . . . . . . mm 150 175 200Cuts piano wire. . . mm 2.0 2.0 2.2Max. cable dia. . . . mm 9.0 11.5 13Pack. . . . . . . . . . . . qty 6 6 6

Art. no.. . . . . . . . . . . . . . . . 7419 -0075 -0083Teng Tools . . . . . . . . . . . . . No MB451-7 MB451-8Length. . . . . . . . . . . . . . . . . mm 175 200Cuts piano wire . . . . . . . . . mm 1.5 2.0Max. cable dia. . . . . . . . . . mm 9 11Pack.. . . . . . . . . . . . . . . . . . qty 6 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14405 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No 496Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250For cable diameter . . . . . . . . . . . . . . . . . . mm 12Forp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6

No 10979

No 14405

No 7423

No 10978

No 7419/MB451

No 7419/MB452

No 10977

Mega Bite

Teng

Too

ls

120


Teng Tools. Heavy-duty model. Chrome vanadium steel. Serrated pa-rallel jaws. Slip joint with curved guide slot. Polished head. Plasticcovered handles.

Groove Joint Pliers

Teng Tools. Used to lock nuts, seals or the like with the help of wire. Withside cutters and with small head for good accessibility. The pliers grip thewire and the rear knot and then twist the wire. Black.

Wire Twisting Pliers

Teng Tools. Single joint. With adjuster screw for required wire diameter0.2-3.0 mm. Return spring and ergonomically designed two componenthandle sleeves.

Wire Stripping Pliers

Teng Tools. Single joint. Head angled 45° for good access. Serratedjaws. Black finish. Plastic covered handles.

Nut Pliers

Teng Tools. Chrome vanadium steel. Serrated jaws with pipe grip.Plastic covered handles.

Teng Tools. Chrome vanadium steel. Serrated jaws with pipe grip. Withergonomically designed two component handle sleeves.

Mega Bite PliersFlat Nose Pliers

Water Pump Pliers

Teng Tools. Single joint. Polished head. Long, straight jaws. Serratedgrip surface. With ergonomically designed two component handle slee-ves.

Art. no. . . . . . . . . . 10593 -0051 -0077 -0101Teng Tools . . . . . . No MB410 MB412 MB416Length . . . . . . . . . . mm 250 300 400Size . . . . . . . . . . . . mm 45 60 90Pack. . . . . . . . . . . . qty 10 5 5

Art. no. . . . . . . . . . . . . 10942 -0109 -0208Teng Tools . . . . . . . . . No MB481-7T MB481-10TLength . . . . . . . . . . . . . mm 175 250Opening width . . . . . . mm 40 45Pack. . . . . . . . . . . . . . . qty 6 6

Art. no. . . . . . . . . . . . 7417 -0051 -0101Teng Tools . . . . . . . . No MB481-7 MB481-10Length . . . . . . . . . . . . mm 175 250Size . . . . . . . . . . . . . . mm 40 45Pack. . . . . . . . . . . . . . qty 6 6

Art. no. . . . . . . . . . . . . . . . . . . . . 13149 -0105Teng Tools . . . . . . . . . . . . . . . . . No AT605Length. . . . . . . . . . . . . . . . . . . . . mm 150Pack. . . . . . . . . . . . . . . . . . . . . . . qty 10

Artnr. . . . . . . . . . . . . . . . . . . . . . . 0770 -0305Teng Tools. . . . . . . . . . . . . . . . . . No MB488Length . . . . . . . . . . . . . . . . . . . . . mm 180Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . 0870 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . No MB499-7TFor wire diameter . . . . . . . . . . . . . . . mm 0.2-3.0Length . . . . . . . . . . . . . . . . . . . . . . . . mm 160Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no. . . . . . . . . . . . . . . . . . . . . 10980 -0102Teng Tools . . . . . . . . . . . . . . . . . No MB464-6TLength . . . . . . . . . . . . . . . . . . . . . mm 150Length of nose . . . . . . . . . . . . . . mm 55Pack. . . . . . . . . . . . . . . . . . . . . . . qty 6

No 0870

No 10980

No 0770

No 13149

No 7417

No 10942

No 10593

Mega Bite

Teng Tools

121


Circlip Pliers

Teng Tools. With high carbon stainless steel blade. Handle of nylon with30% fibreglass.

Electrician’s scissors

Teng Tools. For internal and external circlips. Four interchangeableheads - give eight different combinations. The tips are slightly magnetic.Return spring. Plastic covered handles.


Teng Tools. Mini pliers - cutters, snipe nose pliers and flat nose pliers.Single joint. Polished heads. With plastic covered handles.

Teng Tools. Set consisting of 12 mini screwdrivers and 4 mini-pliers.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Mini Pliers

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11252 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT474-5Circlip pliers straight internal . . . . . . . . . . . . . . . . . . . . mm 10-25Circlip pliers bent internal. . . . . . . . . . . . . . . . . . . . . . . mm 10-25Circlip pliers straight external . . . . . . . . . . . . . . . . . . . mm 10-25Circlip pliers bent external . . . . . . . . . . . . . . . . . . . . . . mm 10-25Length of pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 125Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5

Art. no. . . . . . . . . 9996 -0106 -0205Teng Tools . . . . . No MBM441 MBM449Type of pliers . . . Side cutters End cutterLength . . . . . . . . . mm 114 114Pack. . . . . . . . . . . qty 10 10

Art. no. . . . . . . . . 9996 -0304 -0502Teng Tools . . . . . No MBM461 MBM464Type of pliers . . . Snipe nose pliers Flat nose pliersLength . . . . . . . . . mm 125 125Pack. . . . . . . . . . . qty 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . 7415 -0103Teng Tools . . . . . . . . . . . . . . . . . . . No 480For circlips . . . . . . . . . . . . . . . . . . . mm 10-50Length . . . . . . . . . . . . . . . . . . . . . . . mm 150Pack. . . . . . . . . . . . . . . . . . . . . . . . . qty 5


Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14414 -0100Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . No 497Capacity, soft cable . . . . . . . . . . . . . . . . . . mm 22Blade length. . . . . . . . . . . . . . . . . . . . . . . . . mm 42Total length . . . . . . . . . . . . . . . . . . . . . . . . . mm 138Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

No 11252

No 7415

No 14414

No 9996-0106

No 10445

MBM 449

MBM 461

MBM 464

Mega Bite

Teng

Too

ls

122


Teng Tools. For external circlips. Chrome vanadium steel. Polished head. Plasticcovered handles. Return spring.

Teng Tools. For internal circlips. Chrome vanadium steel. Polished head. Plasticcovered handles. Return spring.

Teng Tools. Set consisting of 4 circlip pliers (2 straight tip and 2bent tip pliers for internal and external circlips). Fitted withreturn spring.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.


Circlip Pliers

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0403 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT474-7Circlip pliers straight internl . . . . . . . . . . . . . . . . . . . . . . mm 12-65Circlip pliers bent internal . . . . . . . . . . . . . . . . . . . . . . . . mm 12-65Circlip pliers straight external . . . . . . . . . . . . . . . . . . . . mm 12-65Circlip pliers bent external . . . . . . . . . . . . . . . . . . . . . . . mm 12-65Length of pliers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 175Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11270 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTX474-9 Circlip pliers straight int. clips. . . . . . mm 32-80Circlip pliers bent int. clips . . . . . . . . mm 32-80Circlip pliers straight ext. clips . . . . . mm 32-80Circlip pliers bent ext. clips . . . . . . . . mm 32-80Length of pliers. . . . . . . . . . . . . . . . . . mm 225Case size LxWxH. . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.5

Art. no. . . . . . . . . . 3496 -0054 -0104 -0153Teng Tools . . . . . . No MB470-5 MB470-7 MB470-9For circlips . . . . . . . mm 10-25 12-65 32-80Model . . . . . . . . . . . straight straight straightLength . . . . . . . . . . mm 130 175 225Pack. . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . 3496 -0179 -0203 -0302Teng Tools . . . . . . No MB471-5 MB471-7 MB471-9For circlips . . . . . . . mm 10-25 12-65 32-80Model . . . . . . . . . . . bent bent bentLength . . . . . . . . . . mm 130 175 225Pack. . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . . . . . . 3502 -0056 -0106 -0155Teng Tools . . . . . . . . . . . No MB472-5 MB472-7 MB472-9For circlips SgA . . . . . . . mm 10-25 10-40 32-80Model . . . . . . . . . . . . . . . straight straight straightLength. . . . . . . . . . . . . . . mm 130 175 225Pack. . . . . . . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . . . . . . 3502 -0171 -0205 -0304Teng Tools . . . . . . . . . . . No MB473-5 MB473-7 MB473-9For circlips SgA . . . . . . . mm 10-25 10-40 32-80Model . . . . . . . . . . . . . . . bent bent bentLength. . . . . . . . . . . . . . . mm 130 175 225Pack. . . . . . . . . . . . . . . . . qty 10 10 10

No 0403

No 11270

No 3496

No 3502

Mega Bite

Teng Tools

123


Teng Tools. Self-locking. Serrated, straight, adjustable jaws. With rele-ase lever. Nickel-plated.

Teng Tools. Self-locking and with non-pinch release lever. Swivel jaw.Nickel-plated.

Teng Tools. With swivel jaws for clamping shaped materials. Self-lock-ing and with release lever. Nickel-plated.

Teng Tools. C-grip with swivel jaws for clamping shaped materials.Self-locking and with release lever. Nickel-plated.

Teng Tools. Self-locking. Serrated, adjustable jaws with pipe grip andcutters. With release lever. Nickel-plated.

Teng Tools. Set of two pliers - no 401-10 with serrated adjustable jawsand pipe grip, and no 404-6 with extra narrow jaws, pipe grip and cutters.Satin finish.

Power Grip PliersTeng Tools. Set of five self-locking pliers with release lever. Three with serrated, adjus-table jaws with pipe grip and cutters and two with extra narrow, long jaws with smooth gripand cutter.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no.. . . . . . . . . . . . 10192 -0106 -0205Teng Tools . . . . . . . . . No 401F-10 401F-12Length. . . . . . . . . . . . . mm 250 300Size . . . . . . . . . . . . . . . mm 0-45 0-52Pack.. . . . . . . . . . . . . . qty 1 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11678 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . No 402Contents:Universal pliers . . . . . . . . . . . . . . . . . No 401-10Universal pliers . . . . . . . . . . . . . . . . . No 404-6Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . set 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 12832 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No 410PLength . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 230Clamping height. . . . . . . . . . . . . . . . . . . mm 65Clamp hole . . . . . . . . . . . . . . . . . . . . . . . mm 4.0Weight . . . . . . . . . . . . . . . . . . . . . . . . . . g 580Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . 7425 -0036 -0044 -0051 -0101 -0200Teng Tools . . . No 401-4 401-5 401-7 401-10 401-12Length. . . . . . . mm 100 125 175 250 300Size . . . . . . . . . mm 0-25 0-28 0-38 0-47 0-50Pack.. . . . . . . . qty 5 5 5 5 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12248 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTVG05Universal pliers 401, lengths . . . . . . . . . . . . . . . . . . mm 100, 175, 250Universal pliers 404, lengths . . . . . . . . . . . . . . . . . . mm 100, 150Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.5

Art. no.. . . . . . . . . . . . . . . . . . . . . 12830 -0100Teng Tools. . . . . . . . . . . . . . . . . . No 406PLength. . . . . . . . . . . . . . . . . . . . . . mm 275Gap width. . . . . . . . . . . . . . . . . . . mm 80Weight . . . . . . . . . . . . . . . . . . . . . g 772Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no.. . . . . . . . . . . . . . . . . . . . . 12831 -0109Teng Tools. . . . . . . . . . . . . . . . . . No 409PLength. . . . . . . . . . . . . . . . . . . . . . mm 300Gap width. . . . . . . . . . . . . . . . . . . mm 65Weight . . . . . . . . . . . . . . . . . . . . . g 580Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 5

No 12830

No 12831

No 7425

No 12832

No 12248

No 11678

No 10192

Mega Bite

Teng

Too

ls

124


Power Grip PliersTeng Tools. With extra narrow jaws. Equipped with pipe grip and cut-ters. Self-locking. With release lever. Nickel-plated.

Typically Teng

Spetstänger

Teng Tools. Snipe nose pliers with single joint and with different jaws.The pliers are designed for good accessibility in confined areas. Plastichandles.

Teng Tools. C-shaped jaws for sections, etc. Self-locking. With releaselever. Nickel-plated.

Teng Tools. For sheet metalwork, etc. Powerful, wide jaws that gripalong the entire front edge for clamping and bending sheet metal. Self-locking. With release lever. Nickel-plated.

Teng Tools. For structural steel, etc. Hardened jaws. Self-locking. Withrelease lever. Nickel-plated.

All Teng Tools power grip pliers have been designed to incorporate a locking nut on theadjustment knob. Ideal for pressetting the pliers for constant working.

Art. no.. . . . . . . . . . . . . . . . . . . . . 10195 -0103Teng Tools. . . . . . . . . . . . . . . . . . Nr 408Length. . . . . . . . . . . . . . . . . . . . . . mm 200Jaw width . . . . . . . . . . . . . . . . . . . mm 75Size. . . . . . . . . . . . . . . . . . . . . . . . mm 0-42Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no.. . . . . . . . . . . . . . . . . . . . . 10194 -0104Teng Tools. . . . . . . . . . . . . . . . . . No 407Length. . . . . . . . . . . . . . . . . . . . . . mm 225Size. . . . . . . . . . . . . . . . . . . . . . . . mm 0-65Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 10193 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . No 406Length . . . . . . . . . . . . . . . . . . . . . . . . mm 250Size . . . . . . . . . . . . . . . . . . . . . . . . . . mm 0-80Throat depth. . . . . . . . . . . . . . . . . . . mm 70Throat height . . . . . . . . . . . . . . . . . . mm 100Pack. . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . . . 14408 -0108 -0207Teng Tools . . . . . . . . . No AT096 AT097Jaw type . . . . . . . . . . . straight bent 45°Length . . . . . . . . . . . . . mm 275 275

Art. no. . . . . . . . . . . . 7427 -0059 -0109 -0208Teng Tools . . . . . . . . No 404-4 404-6 404-9Length . . . . . . . . . . . . mm 100 160 230Jaw width. . . . . . . . . . mm 2 6 9Jaw length . . . . . . . . . mm 35 35 70Pack. . . . . . . . . . . . . . qty 5 5 5

No 14408-0108

No 10195

No 10194

No 10193

No 7427

No 14408-0207

Mega Bite

Teng Tools

125


The Cutting EdgeTeng Tools. Set including hacksaw frame 701. universal saw 705 (forcutting wood. metal and plastic) and universal knife 701.

Teng Tools. Made of drop forged chrome-moly steel. Hardened to HRC60-62. Compound action. Angle between the cutters and handles meansthe hands are kept above the material. Two component handle withhanging hole. With return spring and locking lever.

Teng Tools. Made of drop forged chrome-moly steel. Hardened to HRC60-62. Compound action. Handles of pressed sheet metal. Two compo-nent handle with hanging hole. With return spring and locking lever.

Tin Snips

Teng Tools. Set of 5 pieces. Containing two pairs of tin snips, universal knife, snips andcable pliers.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Cutting Tool SetCutting Tools

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14402 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTDCT05Contents:Tin snips straight/right . . . . . . . . . . . . . . . . . . . . No 491Tin snips straight/left. . . . . . . . . . . . . . . . . . . . . . No 492Universal knife . . . . . . . . . . . . . . . . . . . . . . . . . . . No 701NElectrician’s snips . . . . . . . . . . . . . . . . . . . . . . . . No 497Cable pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 496Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . mm 265x280x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.06

Art. no. . . . . . . . . . . . . . . . . 7416 -0052 -0102 -0201Teng Tools . . . . . . . . . . . . . No 490 491 492Design . . . . . . . . . . . . . . . . . Straight Straight/Right Straight/LeftCuts sheet metal . . . . . . . . mm 1.5 1.5 1.5Cuts stainless sheet metal mm 0.9 0.9 0.9Length . . . . . . . . . . . . . . . . . mm 250 250 250Pack. . . . . . . . . . . . . . . . . . . qty 6 6 6

Art. no. . . . . . . . . . . . . . . . . . . . . . 11685 -0108Teng Tools . . . . . . . . . . . . . . . . . . No 700-PRO5Contents:Hacksaw frame . . . . . . . . . . . . . . No 701Universal saw . . . . . . . . . . . . . . . No 705Universal knife. . . . . . . . . . . . . . . No 710Pack.. . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7416 -0300 -0409Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No 493 494Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right LeftLength. . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250 250Cuts sheet metal . . . . . . . . . . . . . . . . . . . . mm 1.5 1.5Cuts stainless sheet metal. . . . . . . . . . . . mm 0.9 0.9Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6 6

No 11685

No 7416/Angled

No 7416

No 14402

Mega Bite

Teng

Too

ls

126


Teng Tools. With replacable blade for wood and metal. The blade can belocked in 4 different positions - locked with a chuck.Supplied complete with two saw blades - one for wood and one for metal.

Gun saw

Teng Tools. Sturdy universal knife with retractable knife blade. Soft, gripfriendly rubber sides. Supplied with two blades.

Hack saw holderTeng Tools. For whole or broken hacksaw blades. Metal frame andplastic handle. The handle can also be used as a compass saw. Suppliedwith one hacksaw blade.

Teng Tools. Made of aluminium. Retractable knife blade. Supplied withtwo blades.

Utility knives

Teng Tools. Set consisting of hacksaw frames 701, handle for hacksawblades 704 and universal knife 710N.

3 piece Cutting SetCutting Tools

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11827 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No 700-PR03Contents:Hacksaw frame . . . . . . . . . . . . . . . . . . . . . . No 701Handle for hacksaw blades . . . . . . . . . . . . No 704Universal knife . . . . . . . . . . . . . . . . . . . . . . . No 710NPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 10586 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . No 710Total length . . . . . . . . . . . . . . . . . . . . . . mm 160Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

5 spare blades. . . . . . . . . . . . . . . . . . . 10586 -0209Teng Tools . . . . . . . . . . . . . . . . . . . . . . No 710-5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . set 20

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . 11825 -0109Teng Tools. . . . . . . . . . . . . . . . . . . . . . No 704Length . . . . . . . . . . . . . . . . . . . . . . . . . mm 205Depth of frame . . . . . . . . . . . . . . . . . . mm 20Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 12

Art. no. . . . . . . . . . . . . . . . 2009 -0106Teng Tools . . . . . . . . . . . . No 703Overall length. . . . . . . . . . mm 330Quantity . . . . . . . . . . . . . . f 6

Saw blade . . . . . . . . . . . . 2009 -0205 -0304Teng Tools . . . . . . . . . . . . No 703-10 703-24For . . . . . . . . . . . . . . . . . . . wood metalNo. of teeth. . . . . . . . . . . . per inch 10 24

Art. no. . . . . . . . . . . . . . . . . . . . . . 11826 -0108Teng Tools . . . . . . . . . . . . . . . . . . No 710NTotal length . . . . . . . . . . . . . . . . . . mm 180Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 6

No 11826

No 2009

No 10586

No 11827

No 11825

Mega Bite

Teng Tools

127


Teng Tools. Drill bit sets in plastic boxes. Spiral angle 28°. Point angle118°. Split point for better positional accuracy. HSS. Ground from solid,bright finish. Standard drill bits for use in steel and cast iron. DIN 338.15162-0101. Containing: 1.0x4 pc, 1.5x3 pc, 2.0x2 pc. One on each: 2.5,3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 3.3, 4.2och 6.8 mm.15162-0200. Containing: 1.0x 4 pc, 1.5x3 pc, 2.0x2 pc. One of each: 2.5,3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5,11.0, 11.5, 12.0, 12.5, 13.0, 3.3, 4.2, 6.8 mm.

Teng Tools. Set of 28 drills 1.0-13.0 mm. Helix pitch 28°. Point angle 118°. Centre point forimproved position accuracy. HSS. Polished. Ground. Standard drills for drilling steel andcast iron. DIN 338.Contains:3 each of 1.0 and 1.5 mm.2 each of 2.0 and 2.5 mm.1 each of 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 10, 11, 12, 13 mm. Fits in Teng Tools tool boxes and tool trolleys.

Drill bit sets

Teng Tools. Steel frame that doubles as a blade store. Grip friendlyaluminium handle. Two blade locking positions. Can also be used as akeyhole saw as the whole or broken blades can be locked in the top, frontof the frame.Supplied with one hacksaw blade.

Hacksaw frame

Teng Tools. Junior hacksaw for working in wood, metal, plastic etc. Theblade can be locked in six different positions. Supplied with three spare blades.

Mini hacksawCutting Tools

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . 6936 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No 705Blade length. . . . . . . . . . . . . . . . . . . . . . . mm 150Frame depth . . . . . . . . . . . . . . . . . . . . . . mm 50Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 12

5 spare blades . . . . . . . . . . . . . . . . . . . . 6936 -0204Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No 705-5Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 20

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7435 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No 701For hacksaw blades . . . . . . . . . . . . . . . . mm 300Total frame length. . . . . . . . . . . . . . . . . . mm 390Frame material dim. . . . . . . . . . . . . . . . . mm 25×12Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

2 spare blades . . . . . . . . . . . . . . . . . . . . 7435 -0208Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No 702No. of teeth . . . . . . . . . . . . . . . . . . . . . . . per inch 24Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 50

Art. no. . . . . . . . . . . . . . . . 15162 -0101 -0200Teng Tools . . . . . . . . . . . . No DB028 DB034Drill diameters . . . . . . . . . mm 1.0-10.0 1.0-13.0No. of drills . . . . . . . . . . . . e.a. 28 34Pack. . . . . . . . . . . . . . . . . . sts 20 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15144 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTDB28Drill bit diameter (28 pc) . . . . . . . . . . . . . . . . . . . . mm 1.0-13.0Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.624

No 15162

No 15144

No 7435

No 6936

Mega Bite

Teng

Too

ls

128


Cutting ToolsDrill bitsTeng Tools. Spiral angle - 28°. Point angle 118°. Split point for better positional accuract.HSS. Ground from solid. Bright finish. Standard bits for use in steel and cast iron. DIN 338.

Teng Tools. Set of 12 different needle files - flat, half round, three square, square, round,warding, knife, barette, hand, oval, spring and double half round shape. Fine. Supplied in plastic insert tray. Fits in Teng Tools tool boxes and tool trolleys.

Teng Tools. Rack with 5 handled 10″ hand files.Supplied on wall rack.

FilesTeng Tools. Set of 5 handled medium heavy 10″ hand files -flat, hand file, half round, round and three square file.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12843 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTNF12No of needle files. . . . . . . . . . . . . . . . . . . . . ea. 12Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 163Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.47

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12866 -0107Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No WRFL05Contents:Flat file FLFT10, length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Flat file FLHF10, length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Half-round file FLHR10, length. . . . . . . . . . . . . . . . . . . . . . . . mm 250Round file FLRD10, length . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Three square file FLTR10, length . . . . . . . . . . . . . . . . . . . . . mm 250Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no.. . . . . . . . . . . . . . . . . . 12844 -0104Teng Tools. . . . . . . . . . . . . . . No TTXF05No. of files . . . . . . . . . . . . . . . ea. 5File length . . . . . . . . . . . . . . . mm 250Case size LxWxH . . . . . . . . . mm 560x110x74Weight . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. 10 pcs . 15166 -0107 -0206 -0305 -0404 -0503 -0602Teng Tools . . . . . No DBX010 DBX015 DBX020 DBX025 DBX030 DBX033Diameter. . . . . . . mm 1.0 1.5 2.0 2.5 3.0 3.3Overall length . . mm 34 40 49 57 61 65Flute length . . . . mm 12 18 18 30 33 36

Art. no. 10 pcs . 15166 -0701 -0800 -0909 -1006 -1105 -1204Teng Tools . . . . . No DBX035 DBX040 DBX042 DBX045 DBX050 DBX055Diameter. . . . . . . mm 3.5 4.0 4.2 4.5 5.0 5.5Overall length . . mm 70 75 75 80 86 93Flute length . . . . mm 39 43 43 47 52 57

Art. no. 10 pcs . 15166 -1303 -1402 -1501 -1600 -1709Teng Tools . . . . . No DBX060 DBX065 DBX068 DBX070 DBX075Diameter. . . . . . . mm 6.0 6.5 6.8 7.0 7.5Overall length . . mm 93 101 109 109 109Flute length . . . . mm 57 43 69 69 69

Art. no. 5 pcs . 15166 -1808 -1907 -2004 -2103 -2202 -2301Teng Tools . . . . No DBX080 DBX085 DBX090 DBX095 DBX100 DBX105Diameter. . . . . . mm 8.0 8.5 9.0 9.5 10.0 10.5Overall length . mm 117 117 125 125 133 133Flute length . . . mm 75 75 81 81 87 87

Art. no. 5 pcs . 15166 -2400 -2509 -2608 -2707 -2806Teng Tools . . . . No DBX110 DBX115 DBX120 DBX125 DBX130Diameter. . . . . . mm 11.0 11.5 12.0 12.5 13.0Overall length . mm 142 142 151 151 151Flute length . . . mm 94 94 101 101 101

No 12844

No 12866

No 12843

No 15166

Mega Bite

Teng Tools

129


Teng Tools. Handled. Medium coarse. Double cut sides - un-cut edge top. Intended for processing internal corners, anglesand slots, etc. Also suitable for face filing.

Teng Tools. Handled. Double cut - medium coarse. All fouredges cut. Used for filing slots, rectangular holes and insidecorners as well as for tool adjustment.

Teng Tools. Handled. Double cut - medium coarse. For pro-cessing round and concave surfaces.

Teng Tools. Handled. Medium coarse. Hewing all round. Forprocessing concave and flat surfaces as well as large holes.

Teng Tools. Handled.All round engineering file. For filing flatas well as sharp corners or shoulders. Medium coarse - doublecut on both sides. Parallel thickness and width.

Cutting ToolsFilesTeng Tools. Handled. Medium coarse. Double cut on bothsides - single cut on the edges. Working area as a flat file butwith greater accessibility on account of the tapered shape.

Art. no. . . . . . . . . . . . . . . . 12854 -0101Teng Tools. . . . . . . . . . . . . No FLSQ10Length . . . . . . . . . . . . . . . . inch 10Length . . . . . . . . . . . . . . . . mm 250Dimensions . . . . . . . . . . . . mm 9Pack. . . . . . . . . . . . . . . . . . set 10

Art. no. . . . . . . . . . . . . . . . 12853 -0102Teng Tools . . . . . . . . . . . . No FLRD10Length. . . . . . . . . . . . . . . . inch 10Length. . . . . . . . . . . . . . . . mm 250Diameter . . . . . . . . . . . . . . mm 10.2Pack. . . . . . . . . . . . . . . . . . qty 20

Art. no. . . . . . . . . . . . . . . . 12852 -0103Teng Tools. . . . . . . . . . . . . No FLHR10Length . . . . . . . . . . . . . . . . inch 10Length . . . . . . . . . . . . . . . . mm 250Dimensions . . . . . . . . . . . . mm 24.5x8Pack. . . . . . . . . . . . . . . . . . qty 20

Art. no.. . . . . . . . . . . . . . . . 12855 -0100Teng Tools. . . . . . . . . . . . . No FLTR10Length. . . . . . . . . . . . . . . . . inch 10Length. . . . . . . . . . . . . . . . . mm 250Dimensions . . . . . . . . . . . . mm 15.6Pack.. . . . . . . . . . . . . . . . . . set 20

Art. no. . . . . . . . . . . . . . . 12849 -0109Teng Tools . . . . . . . . . . . No FLHF10Length . . . . . . . . . . . . . . . inch 10Length . . . . . . . . . . . . . . . mm 250Dimensions . . . . . . . . . . . mm 24.5x6.15Pack. . . . . . . . . . . . . . . . . set 20

Art. no. . . . . . . . . . . . . . . 12840 -0108Teng Tools . . . . . . . . . . . No FLFT10Length . . . . . . . . . . . . . . . inch 10Length . . . . . . . . . . . . . . . mm 250Dimensions . . . . . . . . . . . mm 24.5x6.35Pack. . . . . . . . . . . . . . . . . qty 20

No 12852

No 12855

No 12849

No 12853

No 12840

No 12854

Mega Bite

Teng

Too

ls

130


Cutting ToolsFilesTeng Tools. Short. Uniform width, with uncut edges. Double cut. For polishing contacts andcontact breakers.

Bolt CuttersTeng Tools. Hardened central cutting edge (cutting angle 30° ).Compound action. Equipped with centering screw that givesincreased safety when cutting. Tubular handles with plasticgrips.

Teng Tools. For copper and brass pipes. One thin cutter wheel and two rollers.Retractable reamer. Spare cutters (2), art. no. 10754-0205.

Pipe CuttersTeng Tools. For copper and brass pipes. One thin cutter wheel and two rollers.The tool has a constant length and is ideal for use in confined spaces.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10754 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TF22For pipe diameter . . . . . . . . . . . . . . . . . . . . . . . mm 3-22Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

Spare cutter wheels (2) . . . . . . . . . . . . . . . . . 10754 -0205Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TF2230RK

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12841 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No FLIP05Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 110Dimensions. . . . . . . . . . . . . . . . . . . . . . . . mm 6.35x1Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10591 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TF30For pipe diameter . . . . . . . . . . . . . . . . . . . . . . . mm 3-32Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10No 10591

No 10754

No 10190

No 12841

Teng Tools Length For max. Bolt cutters Jaws completematerial Art. no. Art. no.

(50 kp/mm2)No mm mm 10190 10190

BC-414 379 6 -0108 -1007BC-418 485 8 -0207 -1106BC-424 652 10 -0306 -1205BC-430 800 13 -0405 -1304BC-436 958 16 -0504 -1403

Force Teng

Teng Tools

131


Torque ToolsTorque Bits Screwdriver SetTeng Tools. The set includes one torque screwdriver, 1⁄4″ extension bar 100 mm, bit holderand 36 different bits.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Torque Screwdriver

Teng Tools. For precision tightening of screws and bolts. For both right and left handaction. With 1⁄4″ ❒-drive and adapter for g 1⁄4″ for bits. Suitable for e.g. fine mechanics,electronics, etc.

Torque WrenchesTeng Tools. Q-series. With torque click function, both right andleft action, compact design and socket retainer the Q-seriesoffers a new option for the industrial user. The torque wrenchesare supplied with compact ratchet head. The scales are easy toread with both Nm and lbf.ft units. The torque wrenches aresupplied with individual calibration certificates that conform tothe demands in ISO 9000:2000. The torque wrenches are supp-lied in plastic case for protection and storage. Conforms to andsurpasses the demands in the applicable ISO 6789 standard.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 12250 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TTSD39Torque screwdriver 1⁄4″-g for . . . . . . . . Nm 1-5Extension bar 1⁄4″- ❒ . . . . . . . . . . . . . . . mm 100Bits for slotted heads . . . . . . . . . . . . . . . mm 0.5x3 0.6x4.5 0.8x5.5 1.2x6.5Bits for Phillips heads . . . . . . . . . . . . . . No 0 1 2 3Bits for Pozidriv-heads . . . . . . . . . . . . . No 0 1 2 3Bits for TX-heads . . . . . . . . . . . . . . . . . . TX 8 9 10 15 20

25 27 30 40Bits for TX-heads . . . . . . . . . . . . . . . . . . TPX 10 15 20 30 40Bits for Robertson heads. . . . . . . . . . . . No 0 1 2 3Bits for Grabber heads PH . . . . . . . . . . No 2 (2)Bits for hex holes . . . . . . . . . . . . . . . . . . mm 2 3 4 5 6Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.66

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12206 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 1492SDTorque range ISO. . . . . . . . . . . . . . . . . . . . . . . . . Nm 1-5Drive for bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch

No 14387

No 12250

No 12206

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . 14387 -0061 -0087 -0103 -0202Teng Tools. . . . . . . . . . . . . . . . . . . . . . No 3892Q060 3892Q100 1292Q200 1292Q320Drive❒ . . . . . . . . . . . . . . . . . . . . . . . . . inch

Torque range ISO. . . . . . . . . . . . . . . . Nm 10-60 20-100 40-200 50-320Torque range Imperial . . . . . . . . . . . . lbf-ft 10-50 20-70 30-150 50-230Length . . . . . . . . . . . . . . . . . . . . . . . . . mm 400 400 483 550Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8 0.8 1.2 1.8

Force Teng

Teng

Too

ls

132


Torque Wrenches

Teng Tools. With ratchet - by which the torque wrench can beused for both full tightening, and the final check of the tighteningtorque. Reversible with lever, but only right-hand action fortorque checking. Equipped with angle gauge for post tigh-tening. Graduated in Nm and Ibf.ft. Lockable setting. Accuracy±4%. Satin finish for the torque setting to be easier to read.Degree scale for post tightening of cylinder heads, etc.No 1292AG-ER and 1292AG-E4R with torque control for bothright and left-hand action. TTX1292 supplied in plastic case with space for sockets.Individual calibration certificate enclosed with each torquewrench.Tightening torque for different screws see

Teng Tools. Torque wrenches with preset torque. Manufactured according to ISO6789. Accuracy ±4 %. Rubber handle.

Teng Tools. Set of 4 torque wrenches with preset torque. Manufactured according to ISO6789. Accuracy ±4%. Matt chromium plated. Rubber handle. Separate wall rack supplied. Supplied in PS insert case with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14386 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTPSTQ04Quantity torque wrenches . . . . . . . . . . . . . . . . ea 4Drive❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch

Adjustable torque . . . . . . . . . . . . . . . . . . . . . . . Nm 90, 110, 120, 140Torque wrench length . . . . . . . . . . . . . . . . . . . mm 513Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . mm 570x262x73Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 5.8

No 14385

No 7319-0100

No 14386

Art. no. . . . . . . . . . . . . . . . 14385 -0105 -0204 -0303 -0402Teng Tools . . . . . . . . . . . . No 1292AG-090 1292AG-110 1292AG-120 1292AG-140Drive❒ . . . . . . . . . . . . . . . . inch

Preset torque . . . . . . . . . . Nm 90 110 120 140Length . . . . . . . . . . . . . . . . mm 513 513 513 513Weight . . . . . . . . . . . . . . . . kg 1.4 1.4 1.4 1.4

No 7319-0209

Art. no. . . . . . . . . . . . . . . . 7319 -0035 -0050 -0076 -0100 -0175 -0191Teng Tools . . . . . . . . . . . . No 1492AG-E 3892AG-E1 3892AG-E3 TTX1292 1292AG-ER 1292AG-EPTorque range ISO . . . . . . Nm 5-25 5-25 20-100 40-210 40-200 40-210Torque range Imperial . . Ibf.ft 4-18 4-18 15-75 30-160 30-150 30-160Drive size❒ . . . . . . . . . . . . inch

Total length. . . . . . . . . . . . mm 277 277 368 465 465 465

Repair set ERK. . . . . . . . 7319 -1009 -1108 -1207 -1306 -1603 -1306Pack. . . . . . . . . . . . . . . . . . qty 1 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . 7319 -0209 -0258 -0282 -0308 -0407Teng Tools . . . . . . . . . . . . No 1292AG-E4 1292AG-E4R 3492AG-ER 3492AG-E1 3492AG-E2Torque range ISO . . . . . . Nm 70-350 70-350 90-450 140-700 140-980Torque range Imperial . . Ibf.ft 50-250 50-250 60-300 100-500 100-700Drive size❒ . . . . . . . . . . . . inch

Total length. . . . . . . . . . . . mm 632 632 850 1065 1213

Repair set ERK. . . . . . . . 7319 -1405 -1702 -1900 -1504 -1504Pack. . . . . . . . . . . . . . . . . . qty 10 10 1 1 1

Force Teng

Teng Tools

133


Torque WrenchesTeng Tools. Set consisting of torque wrench, 10 crow footspanners, bit socket, 8 TX-bits and extension bars 75 and 125mm.Individual calibration certificate enclosed.Supplied in TC tray suitable for Teng Tools tool boxes and tooltrolleys.

Teng Tools. With ratchet - by which the torque wrench can beused for both full tightening, and the final check of the tighteningtorque. Reversible with lever, but only right-hand action fortorque checking. Equipped with angle gauge for post tightening.Graduated in Nm and lbs-foot. Lockable setting. Accuracy ±4%. Satin finish for the torque setting to be easier to read.Degree scale for post tightening of cylinder heads, etc.Supplied in plastic case with space for sockets.Fits in Teng Tools tool boxes and tool trolleys.and

Teng Tools. Series Mecca Rosso. Mechanic set. Registered design. Industrial quality.Contains 1⁄4″-g bit screwdriver with magnet, 3⁄8″ torque wrench with ratchet mechanism, 3⁄8″impact screwdriver, 14 short and 6 long sockets with 6-point openings, 2 spark plug sockets16 and 21 mm, 16 1⁄4″-g screwdriver bits, fibre reinforced ratchet handle with lever forreversible action, universal joint, 2 extension bars 75 and 150 mm, adaptor drive 1⁄2″-3⁄8″, 2 bitsockets 3⁄8″-❒-1⁄4″-g, adapter ext. 1⁄4″-g-3⁄8″-❒.Supplied in plastic case with click lock and folding handle. The underside of the case is fittedwith rubber feet to prevent it from sliding.

Art. no. . . . . . . . . . . . . . . . . 10211 -0104Teng Tools . . . . . . . . . . . . . No TTX3892Drive size❒ . . . . . . . . . . . . . inch

Torque range ISO . . . . . . . Nm 20-110Torque range Imperial. . . . lbf.ft 15-75Length of torque wrench . . mm 365Crow foot spanners . . . . . . mm 10 11 12 13 14

15 16 17 18 19Bits for TX heads . . . . . . . . TX 8 10 15 20 25 27 30 40Case size LxWxH. . . . . . . . mm 560x110x60Weight . . . . . . . . . . . . . . . . . kg 0.9

Repair set. . . . . . . . . . . . . . 7319 -1207Pack. . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . 7319 -0100Teng Tools . . . . . . . . . . . . . . . . No TTX1292For tightening torque . . . . . . . . Nm 40-210For tightening torque . . . . . . . . lbf-foot 30-150Drive dimension ❒ . . . . . . . . . . inch 1⁄2Length . . . . . . . . . . . . . . . . . . . . mm 465Case size LxWxH. . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . kg 1.65

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1417 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . No MR3849No. of pieces . . . . . . . . . . . . . . . . . . . . . . . . . ea. 49Sockets’ dim. (short) . . . . . . . . . . . . . . . . . . mm 8 9 10 11 12 13 14

15 16 17 18 2122Sockets’ dim. (deep) . . . . . . . . . . . . . . . . . . mm 8 10 12 13 17 19Spark plug socket . . . . . . . . . . . . . . . . . . . . . mm 16 21Torque wrench (3⁄8-❒) . . . . . . . . . . . . . . . . . Nm 20-100Bit screwdriver, drive . . . . . . . . . . . . . . . . . . inch 1⁄4-gBits 1⁄4-g 40 mm longBits for slotted heads . . . . . . . . . . . . . . . . . . mm 0.8×4 1.2×6 1.4×8Bits for Phillips heads . . . . . . . . . . . . . . . . . No 1 2Bits for hex holes . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8Bits for TX heads . . . . . . . . . . . . . . . . . . . . . TX 10 15 20 25 30 40Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 4.3

No 10211

No 7319

No 1417

Force Teng

Teng

Too

ls

134


Teng Tools. For dismantling stubborn bolts and nuts. Whentightening the torque is increased 3 times on the output drive.Used together with automotive sockets.

Torque Multipliers

Teng Tools. Set containing one torque multiplier and one tor-que wrench. The torque multiplier’s input tightening torque istrebled on the output drive. The torque wrench has a 1⁄2″ ❒-driveand torque range 40-210 Nm.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Torque Multiplier/Wrench Set

All Teng Tools torque wrenches should be cleaned and maintained on a regular basis toreduce wear and to prolong life. However, with all tools involving moving parts some wearwill occur with use. Teng Tools offer a full range of complete repair kits and spare parts fortheir torque wrenches - full details can be found on the Teng Tools website or are availablefrom your local Teng Tools stockist.

All torque wrenches should be recalibrated on a regular basis to ensure continued accura-cy. Teng Tools recommend that torque wrenches are recalibrated at least once a year orevery 10,000 torque application cycles, whichever comes first. Full details of recalibrationservice can be obtained from your local stockist or by visiting www.tengtools.com.

Bi-directional torque wrench for left/right hand threads with push through square drive andflip reverse ratchet action, now available in 1/2 drive and 3/4 drive (se page 73).

Teng Tools. Series Mecca Rosso. 51 piece socsket set containing regular and deepmetric sockets, fibre reinforced ratchet handle, angulara gauge torque wrench, spark plugand wheel nut sockets, impact driver and impact bits adaptor and bits. Supplied in red platic case with click lock and folding handle. Tool mat in case’s lid. Theunderside of the case is fitted with rubber feet to prevent it from sliding.

Torque Wrenches

Bi-directional Torque Wrenches

Recalibration service

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13214 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No MR1251Redular sockets . . . . . . . . . . . . . . . . . . . . mm 10 11 12 13 14 15 16 17

18 19 21 22 24 27 30 32Deep sockets. . . . . . . . . . . . . . . . . . . . . . . mm 10 13 18 24Spark plug sockets . . . . . . . . . . . . . . . . . . mm 16 18 21Wheel nut sockets . . . . . . . . . . . . . . . . . . mm 17 19 21Torque wrench 1⁄2″ ❒-drive . . . . . . . . . . . Nm 40-200Spinner handle ❒-drive . . . . . . . . . . . . . . inch 1⁄2Adeptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 5⁄16″g - 3⁄8″ ❒Bit adptor 1⁄2″ ❒ . . . . . . . . . . . . . . . . . . . . . inch 5⁄16″gBits 5⁄16″ flat . . . . . . . . . . . . . . . . . . . . . . . . mm 6 8 10 12Bits 5⁄16″ for Phillips heads . . . . . . . . . . . . Nr 1 2 3 4Bits 5⁄16″ hex . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 6 8Bits 5⁄16″ for TX heads . . . . . . . . . . . . . . . . TX 30 40 45 50 55Case LxWxH . . . . . . . . . . . . . . . . . . . . . . . mm 550x280x60Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 7.91

Art. no. . . . . . . . . . . . . . . . . . . . . . 12822 -0100Teng Tools . . . . . . . . . . . . . . . . . . No TTXMP12Torque multiplier:Max. tightening torque . . . . . . . . Nm 1400Torque wrench:Torque range ISO . . . . . . . . . . . . Nm 40-210Torque range Imperial . . . . . . . . lbf.ft 30-160Insert size LxWxH . . . . . . . . . . . . mm 560x110x60Weight . . . . . . . . . . . . . . . . . . . . . kg 4.0

Art. no. . . . . . . . . . . . . . . . . . . . . 12207 -0105 -0204Teng Tools . . . . . . . . . . . . . . . . . No MP1400 MP2700Max. tightening torque . . . . . . . Nm 1400 2700Max. tightening torque . . . . . . . lbs-ft 1000 2000Incoming tightening torqueincreases no. of times. . . . . . . . 3 3Input ❒ drive. . . . . . . . . . . . . . . . inch

Output drive . . . . . . . . . . . . . . . . inch

Weight. . . . . . . . . . . . . . . . . . . . . kg 2.28 4.78

No 13214

No 12822

No 12207

Impact Tools

Teng Tools

135


Impact Socket SetsTeng Tools. 24 piece impact socket set. Contains 5 1⁄4″ short sockets, 9 short sockets 3⁄8″, 9long sockets 3⁄8″ and one adaptor 3⁄8″-1⁄4″.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containing 16 1/2″ drive impact sockets - regular and deep.Supplied in a plastic TC tray with removable cover. The cases fit in Teng Tools tool boxesand tool trolleys.

Teng Tools. Set containing 16 impact sockets - short and long and 2 locking pins and 2O-rings.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set containing sockets with 6 point openings.Supplied on clip rail.

Teng Tools. 7 piece set with impact socket tools. Contains three extension bars, universaljoint, 2 adaptor drives for enlargement and one for reduction.PARASupplied in a plastic TCtray with removable cover. The cases fit in Teng Tools tool boxes and tool trolleys.

Teng Tools. Sets with deep impact sockets with 6-point openings.Supplied on clip rail.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6880 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT9116Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Socket sizes. short sockets . . . . . . . . . . . . . . . . . . . . . mm 13 15 16 17

18 19 22 24Socket sizes. deep sockets . . . . . . . . . . . . . . . . . . . . . mm 13 15 16 17

18 19 22 24Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.2

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13246 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT9207Extension bars, length . . . . . . . . . . . . . . . . . . . . mm 75,125, 250Universal joint. . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Adaptor drives . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2-3⁄4, 3⁄8-1⁄2Adaptor drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2-3⁄8Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.05

Art. no. . . . . . . . . . . . . . . . 11496 -0107 -0206Teng Tools . . . . . . . . . . . . No 9386 9126No. of sockets. . . . . . . . . . 8 10Drive ❒ . . . . . . . . . . . . . . . inch 3⁄8 1⁄2Socket’s size. . . . . . . . . . . mm 8 10 11 13

14 16 17 1910 11 12 13 1417 19 21 22 24

Weight . . . . . . . . . . . . . . . . kg 1.1 2.6

Art. no. . . . . . . . . . . . . . . . . 7524 -0101 -0200Teng Tools . . . . . . . . . . . . . No 9381 9121No. of sockets . . . . . . . . . . 8 10Drive ❒ . . . . . . . . . . . . . . . . inch 3⁄8 1⁄2Socket’s size . . . . . . . . . . . mm 8 10 11 13

14 16 17 1910 11 13 14

17 19 21 22 24Weight. . . . . . . . . . . . . . . . . kg 0.5 1.3

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14384 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT9120DConnection bracket❒ . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Socket sizes. short sockets. . . . . . . . . . . . . . . . . . mm 13, 15, 16, 17,

18, 19, 22, 24Socket sizes. long sockets . . . . . . . . . . . . . . . . . . mm 13, 15, 16, 17,

18, 19, 22, 24Locking pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 20x3.5, 25x3.5O-rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3x20, 3x24Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.2

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 13247 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TT9024Short sockets, 1⁄4″ ❒ drive . . . . . . . . . . mm 6 7 8 10 13Short sockets, 3⁄8″ ❒ drive . . . . . . . . . . mm 8 10 11 12 13 14 16 17 19Long sockets, 3⁄8″ ❒ drive . . . . . . . . . . . mm 8 10 11 12 13 14 16 17 19Adaptor drive . . . . . . . . . . . . . . . . . . . . . inch 3⁄8-1⁄4Case dim. LxWxH . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.07

No 14384

No 6880

No 13246

No 11496-0107

No 7524

No 13247

Impact Tools

Teng

Too

ls

136


Teng Tools. For domed cap nuts. Chrome-moly steel. Equipped with protective sleevethat protects when used on aluminium rims.

Wheel nut sockets

Teng Tools. For domed cap nuts. Set of 3 chrome-moly steel sockets. Equipped withprotective sleeve that protects when used on aluminium rims.

Wheel nut socket set

Impact Driver Sets

Teng Tools. Set with 15 hex impact socket bits.Supplied in a plastic TC tray with removeable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Reversible action. Driver designed with 1⁄2″ ❒-drive, but isalso equipped with a chuck in which bits with 5⁄16″-g-drive can be fitted.Supplied complete with chuck and two screwdriver bits for slotted headsand Phillips heads.Supplied in metal case.

Teng Tools. Set of twelve 1⁄2″ impact bits for internal TX heads.Supplied in a plastic TC tray with removable cover that fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set of 3⁄4″ impact sockets - 8 regular and 7 deep asper DIN-standard.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Impact Socket Sets

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 12813 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . No TT9212TXNo. of socket bits . . . . . . . . . . . . . . . . ea. 12TX-size. . . . . . . . . . . . . . . . . . . . . . . . . TX- 10 15 20 25 27 30

40 45 50 55 60 70Case size LxWxH. . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.9

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 0312 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . No ID506For bits with drive. . . . . . . . . . . . . . . g-inch 5⁄16

Bits for slotted heads. . . . . . . . . . . . mm 1.4×8 2.2×10Bits for Phillips-heads . . . . . . . . . . . No 2 3

Separate bit set . . . . . . . . . . . . . . . 0312 -0201

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15141 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. TT9015HXSocket bits with 3⁄8″ ❒-drive, size . . . . . . . . . mm 4, 5, 6, 7, 8, 10, 12Socket bits with 1⁄2″ ❒-drive, size . . . . . . . . . mm 5, 6, 8, 10, 12, 14, 17, 19Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.492

Art. no.. . . . . . . . . . . . . . . . . . . 12208 -0104Teng Tools. . . . . . . . . . . . . . . . No TTX9415Drive . . . . . . . . . . . . . . . . . . . . . inch 3⁄4Short sockets, size . . . . . . . . . mm 19 24 27 28

30 32 34 36Deep sockets, size . . . . . . . . . mm 19 24 27 30

32 33 36Case size LxWxH . . . . . . . . . . mm 560x110x60Weight . . . . . . . . . . . . . . . . . . . kg 9.0

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11887 -0104Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 9203NSocket dimensions . . . . . . . . . . . . . . . . . . . . . . . mm 17, 19, 21Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 85

Art. no. . . . . . . . . . . . 11835 -0107 -0206 -0305Teng Tools . . . . . . . . No 920517N 920519N 920521NSize . . . . . . . . . . . . . . mm 17 19 21Length . . . . . . . . . . . . mm 85 85 85Pack. . . . . . . . . . . . . . qty 5 5 5

No 0312

No 15141

No 12813

No 12208

No 11887

No 11835

Impact Tools

Teng Tools

137


Impact Driver SetsTeng Tools. Set of 15 pieces. Reversible action. Driver designed with 1⁄2″❒-drive, but is also equipped with a chuck in which bits with 5⁄16″-g-drivecan be fitted. With adaptor 5⁄16″g-3⁄8″❒, chuck 1⁄2″❒-5⁄16″g and12 differentbits.Supplied in metal case.

Teng Tools. Set containing 1⁄2″ impact driver, bit socket, adaptor g5⁄16″-3⁄8 ″❒ as well as 17bits.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Impact BitsTeng Tools. Bits with 5⁄16″g drive. Length 36 mm.

Art. no. . . . . . . . . . . . . . . . . . . . . . . 7266 -0103Teng Tools . . . . . . . . . . . . . . . . . . . No ID 515For bits with drive. . . . . . . . . . . . . . g-inch 5⁄16

Bits for slotted heads. . . . . . . . . . . mm 1.4×6 1.4×82.2×10 1.8×12

Bits for Phillips heads . . . . . . . . . . No 1 2 3 4Bits hex type bits . . . . . . . . . . . . . . mm 4 5 6 8Adaptor drive . . . . . . . . . . . . . . . . . inch 1⁄2-3⁄8

Separate bit set . . . . . . . . . . . . . . 7266 -0202

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10210 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No TTID20For bits with drive . . . . . . . . . . . . . . . . . . . g inch 5⁄16

Bits for slotted heads . . . . . . . . . . . . . . . . mm 1.4x6 1.4x8 2.2x10 1.8x12Bits for Phillips heads . . . . . . . . . . . . . . . . No 1 2 3 4Bits for int. hex holes . . . . . . . . . . . . . . . . mm 4 5 6 8Bits for TX heads. . . . . . . . . . . . . . . . . . . . TX- 30 40 45 50 55Case size LxWxH . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Spare adaptor 3⁄8″ ❒ - 5⁄16″g . . . . . . . . . 10210 -0203Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. Teng Tools For screw Pack.No with qty

11648-0104 910504 4 mm hex holes 111648-0203 910505 5 mm hex holes 111648-0302 910506 6 mm hex holes 111648-0401 910508 8 mm hex holes 1

11648-0500 940006 6 mm slotted head 111648-0609 940008 8 mm slotted head 111648-0708 940010 10 mm slotted head 111648-0807 940012 12 mm slotted head 1

11648-0906 930001 No 1 Phillips head 111648-1003 930002 No 2 Phillips head 111648-1102 930003 No 3 Phillips head 111648-1201 930004 No 4 Phillips head 1

13223-0103 920001 No 1 Pozidriv cross head 113223-0202 920002 No 2 Pozidriv cross head 113223-0301 920003 No 3 Pozidriv cross head 1

14987-0107 970030 TX30 for TX-head 1014987-0206 970040 TX40 for TX-head 1014987-0305 970045 TX45 for TX-head 1014987-0404 970050 TX50 for TX-head 1014987-0503 970055 TX55 for TX-head 10

No 7266

No 10210

No 11648

Nr 13223

Nr 14987

Impact Tools

Teng

Too

ls

138


Impact Accessories

Teng Tools. Different parts for interconnecting different impact sockettools.

Retaining Rings

Teng Tools. For connecting sockets in machines with drilled square drives. Prevents thelocking pin from coming out of position.

Retaining PinsTeng Tools. To lock sockets and tools in machines with drilled square drives.

Art. no.. . . . . . . . . 11675 -0050 -0084 -0100 -0209 -0308Teng Tools. . . . . . No P902515 P90320 P90320 P90324 P90328Diam.×length . . . . mm 2.5x15 2.5x18 3x20 3x24 3x28Pack.. . . . . . . . . . . qty 10 10 10 10 10

Art. no.. . . . . . . . . 11675 -0357 -0407 -0506 -0605Teng Tools. . . . . . No P90332 P90437 P90543 P90675Diam.×length . . . . mm 3x32 4x37 5x43 6x75Pack.. . . . . . . . . . . qty 10 10 10 10

No 11669

No 11674

No 11675

Art. no.. . . . . . . . . . . 11674 -0051 -0085 -0101 -0200 -0309 -0333Teng Tools. . . . . . . . No O92416 O92419 O935202 O93525 O93528 O93530Diam.x thick. . . . . . . mm 16.0x2.4 19.0x2.4 20.2x3.5 25.0x3.5 28.0x3.5 30.0x3.5Pack.. . . . . . . . . . . . . qty 10 10 100 10 10 10

Art. no.. . . . . . . . . . . 11674 -0358 -0382 -0408 -0507 -0606 -0705Teng Tools. . . . . . . . No O93532 O93534 O93538 O93546 O93548 O970055Diam.x thick. . . . . . . mm 32.0x3.5 34.0x3.5 38.0x3.5 46.0x3.5 48.0x3.5 75.0x5.7Pack.. . . . . . . . . . . . . qty 10 10 10 10 10 10

Art. no. Teng Tools Connect- Product For For Pack.ation lock- lock-

No ❒ ring pin qty11669-0058 980020-C 3⁄8″ Extension bar 75 mm O92416 P902515 1011669-0850 980035-C 3⁄8″ Adapter drive 3⁄8″-1⁄4″ O92419 P902518 1011669-0108 980036-C 3⁄8″ Adapter drive 3⁄8″-1⁄2″ O92419 P902518 1011669-0207 980060-C 3⁄8″ Impact bit socket 1⁄4″ - - 1010210-0203 980086-C 3⁄8″ Adapter 3⁄8″❒ - 5⁄16″g - - 1011669-0405 920020-C 1⁄2″ Extension bar 75 mm O935202 P90320 1011669-0504 920021-C 1⁄2″ Extension bar 125 mm O935202 P90320 1011669-0603 920023-C 1⁄2″ Extension bar 250 mm O935202 P90320 1011669-0702 920030-C 1⁄2 Universal joint O93528 P90328 10

11669-0801 920036-C 1⁄2″ Adapter drive 1⁄2″-3⁄8″ O935202 P90320 1011669-0835 920036A-C 1⁄2″ Adaptor drive ANSI 1⁄2″-3⁄8″ O935202 P90320 1011669-0900 920037-C 1⁄2″ Adapter drive 1⁄2″-3⁄4″ O935202 P90320 1011669-1007 920060-C 1⁄2″ Bit socket 5⁄16″ - - 1011669-1106 940022 3⁄4″ Extension bar 175 mm O93538 P90437 1011669-1205 940030 3⁄4″ Universal joint O93538 P90437 1011669-1304 940037 3⁄4″ Adapter drive 3⁄4″-1⁄2″ O93538 P90437 1011669-1403 940085 3⁄4″ Adapter drive 3⁄4″-1″ O93538 P90437 111669-1502 910086 1″ Adapter drive 1″-3⁄4″ O93546 P90543 1

Impact Tools

Teng Tools

139


Impact Sockets1⁄4″ DriveTeng Tools. Thinnwalled. Chrome molybdenum. 6 point. Black.

Teng Tools. Impct socket bits for internal hexagon holes. Chrome molydenum. The socketbits are suppplied with hole for retaining pin and grove for retaining ring. Black.

Teng Tools. Made of chrome-molybdenum special steel. With 6 point openings. Black.

3⁄8″ Drive

Art. no. . . . . . . . . . . . . . . . . . 15143 -0105 -0204 -0303 -0402Teng Tools 9815Size . . . . . . . . . . . . . . . . . . . . mm 4 5 6 7Length. . . . . . . . . . . . . . . . . . mm 52 52 52 52Suitable retaining pin . . . . . Nr P90320 P90320 P90320 P90320Suitable retaining ring . . . . Nr O935202 O935202 O935202 O935202Pack. . . . . . . . . . . . . . . . . . . . qty 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . 15143 -0501 -0600 -0709Teng Tools 9815Size . . . . . . . . . . . . . . . . . . . . mm 8 10 12Length. . . . . . . . . . . . . . . . . . mm 52 52 52Suitable retaining pin . . . . . Nr P90320 P90320 P90320Suitable retaining ring . . . . Nr O935202 O935202 O935202Pack. . . . . . . . . . . . . . . . . . . . qty 10 10 10

Standard length DeepTeng Tools 9805-C Teng Tools 9806-C

Size Art. no. Length Pack. Art. no. Length Pack.mm 11483 mm qty 11486 mm qty

8 -0102 30 10 -0109 65 1010 -0201 30 10 -0208 65 1011 -0300 30 10 -0307 65 1012 -0409 30 10 -0406 65 10

13 -0508 30 10 -0505 65 1014 -0607 30 10 -0604 65 1016 -0706 30 10 -0703 65 1017 -0805 30 10 -0802 65 1019 -0904 30 10 -0901 65 10

Size Standard-lengthTeng Tools 9605-C

Length Art. no. Pack.mm mm 13243 qty

6 21 -0109 107 21 -0208 108 21 -0307 10

10 21 -0406 1013 21 -0505 10

No 11483

No 13243

No 15143

No 11486

Impact Tools

Teng

Too

ls

140


Impact Sockets1⁄2″ Drive

Teng Tools. Made of chrome-molybdenum special steel. With 6-point openings. Thesockets are equipped with a hole for a locking pin that locks the socket on the machine’ssquare drive. Black.

No 10178No 11487

Size Standard-length Long For Forgrip Teng Tools 9205-C Teng Tools 9206-C lock- lock-

Length Art. no. Pack. Length Art. no. Pack.ring pin

mm mm 10178 qty mm 10178 qty No No8 38 -0021 10 - - - O935202 P90320

10 38 -0039 10 78 -0930 10 O935202 P9032011 38 -0062 10 78 -0963 10 O935202 P9032012 38 -0096 10 78 -0997 10 O935202 P9032013 38 -0104 10 78 -1003 10 O935202 P9032014 38 -0153 10 78 -1052 10 O935202 P90320

15 38 -0203 10 78 -1102 10 O93525 P9032416 38 -0302 10 78 -1201 10 O93525 P9032417 38 -0401 10 78 -1300 10 O93525 P9032418 38 -0500 10 78 -1409 10 O93525 P90324

19 38 -0609 10 78 -1508 10 O93525 P9032420 38 -0633 10 - - - O93525 P9032421 38 -0658 10 78 -1557 10 O93525 P9032422 38 -0708 10 78 -1607 10 O93525 P9032423 38 -0757 10 - - - O93525 P90324

24 38 -0807 10 78 -1706 10 O93525 P9032425 45 -0815 10 - - - O93525 P9032426 50 -0823 10 - - - O93525 P9032427 50 -0831 1 78 -1805 10 O93525 P9032428 50 -0849 10 78 -1904 10 O93525 P90324

29 50 -0856 10 78 -2001 10 O93525 P9032430 50 -0864 10 78 -2100 10 O93525 P9032432 50 -0872 10 78 -2209 10 O93525 P9032435 - - - 78 -2308 10 O93525 P9032436 - - - 78 -2407 10 O93525 P90324

Size Size Standard-length Long For For grip grip Teng Tools 9201-C Teng Tools 9202-C lock- lock-

Length Art. no. Pack. Length Art. no. Pack.ring pin

inch mm mm 11487 qty mm 11487 qty No No7⁄16 11.1 38 -0108 10 78 -2005 10 O935202 P903201⁄2 12.7 38 -0207 10 78 -2104 10 O935202 P90320

9⁄16 14.3 38 -0306 10 78 -2203 10 O935202 P903205⁄8 15.9 38 -0405 10 78 -2302 10 O935202 P90320

11⁄16 17.5 38 -0504 10 78 -2401 10 O935202 P903203⁄4 19 38 -0603 10 78 -2500 10 O935202 P90320

13⁄16 20.6 38 -0702 10 78 -2609 10 O935202 P903207⁄8 22.2 38 -0801 10 78 -2708 10 O935202 P90320

15⁄16 23.8 38 -0900 10 78 -2807 10 O93530 P930281 25.4 38 -1007 10 78 -2906 10 O93532 P93028

15⁄16 33.3 38 - - 78 -3003 10 O93534 P9303211⁄2 38 38 - - 78 -3102 10 O93534 P93032

Impact Tools

Teng Tools

141



Teng Tools. Impact bits of chrome vanadium steel for internal TXheads. The shape of the head gives minimal torque transmission losses.

Teng Tools. Made of chrome-molybdenum special steel. With 6 point openings. Thesockets are equipped with a hole for a locking pin that locks the socket on the machine’ssquare drive. Black.

Teng Tools. Impct socket bits for internal hexagon holes. Chrome molydenum. The socketbits are suppplied with hole for retaining pin and grove for retaining ring. Black.

3⁄4″ Drive

Size Standard length Deep For ForTeng Tools 9405 Teng Tools 9406 retaining retaining

Length Art. no. Length Art. no. ring pinmm mm 11488 mm 11489 No No19 50 -0107 95 -0106 O93538 P9043721 50 -0156 95 -0155 O93538 P9043722 50 -0172 95 -0171 O93538 P9043723 50 -0198 95 -0197 O93538 P9043724 52 -0206 95 -0205 O93538 P9043727 52 -0305 95 -0304 O93538 P9043728 52 -0404 - - O93538 P90437

30 52 -0503 95 -0403 O93538 P9043732 52 -0602 95 -0502 O93538 P9043733 56 -0701 95 -0601 O93538 P9043734 56 -0800 95 -0700 O93538 P90437

36 56 -0909 95 -0809 O93538 P9043738 56 -1006 95 -0908 O93538 P9043741 58 -1105 95 -1005 O93538 P9043746 63 -1204 95 -1104 O93538 P90437

Art. no.. . . . . . . . . . . . . . . . 15142 -0106 -0205 -0304 -0403Teng Tools 9215-CSize. . . . . . . . . . . . . . . . . . . mm 5 6 8 10Length . . . . . . . . . . . . . . . . mm 78 78 78 78Suitable locking pin . . . . . Nr P90320 P90320 P90320 P90320Suitable locking ring. . . . . Nr O935202 O935202 O935202 O935202Pack. . . . . . . . . . . . . . . . . . qty 10 10 10 10

Art. no.. . . . . . . . . . . . . . . . 15142 -0502 -0601 -0700 -0809Teng Tools 9215-CSize. . . . . . . . . . . . . . . . . . . mm 12 14 17 19Length . . . . . . . . . . . . . . . . mm 68 78 78 78Suitable locking pin . . . . . Nr P90320 P90320 P90320 P90320Suitable locking ring. . . . . Nr O935202 O935202 O935202 O935202Pack. . . . . . . . . . . . . . . . . . qty 10 10 10 10

No 12814

No 11488

No 15142

Art. no. . . . . . . . . . . . . . 12814 -0100 -0209 -0308 -0407 -0506 -0605Teng Tools . . . . . . . . . . No 921210TX-C 921215TX-C 921220TX-C 921225TX-C 921227TX-C 921230TX-CTX-size . . . . . . . . . . . . . TX- 10 15 20 25 27 30Max. head width. . . . . . mm 2.74 3.27 3.86 4.43 4.99 5.52For screw . . . . . . . . . . . M 3-3.5 3.5-4 4-5 4.5-5 4.5-6 6-7Suitable retainer ring. . No O935202 O935202 O935202 O935202 O935202 O935202Suitable locking pin . . . No P90320 P90320 P90320 P90320 P90320 P90320Length . . . . . . . . . . . . . . mm 78 78 78 78 78 78

Art. no. . . . . . . . . . . . . . 12814 -0704 -0803 -0902 -1009 -1108 -1207Teng Tools . . . . . . . . . . No 921240TX-C 921245TX-C 921250TX-C 921255TX-C 921260TX-C 921270TX-CTX-size . . . . . . . . . . . . . TX- 40 45 50 55 60 70Max. head width. . . . . . mm 6.65 7.82 8.83 11.25 13.25 15.5For screw . . . . . . . . . . . M 7-8 8-10 10 12 14 16Suitable retainer ring. . No O935202 O935202 O935202 O935202 O935202 O935202Suitable locking pin . . . No P90320 P90320 P90320 P90320 P90320 P90320Length . . . . . . . . . . . . . . mm 78 78 78 78 78 78

No 11489

Impact Tools

Teng

Too

ls

142


Teng Tools. Made of chrome-molybdenum special steel. Thin walled, long sockets with6-point openings. The sockets are equipped with a hole for a locking pin that locks thesocket on the machine’s square drive. Black.

Teng Tools. Made of chrome-molybdenum special steel. With6 point openings. The sockets are equipped with a hole for alocking pin that locks the socket on the machine’s square drive.Black.

1″ Drive

Teng Tools. Impact socket bit. Made of chrome-molybdenium steel. For internal hexagonholes.


Art. no. . . . . . . . . . . . . . . . . . . . . 14398 -0100 -0209 -0308Teng Tools . . . . . . . . . . . . . . . . . No 941519-C 941522-C 941524-CFor hexagon holes. . . . . . . . . . . mm 19 22 24Suitable retaining ring . . . . . . . . No. O93538 O93538 O93538Suitable retaining pin . . . . . . . . No. P90437 P90437 P90437Length . . . . . . . . . . . . . . . . . . . . . mm 90 90 90

Art. no. . . . . . . . . . . 11491 -0102 -0201 -0300 -0409 -0508 -0607Teng Tools 9106Size . . . . . . . . . . . . . mm 24 27 30 32 33 36For retaining rings . No O93546 O93546 O93546 O93546 O93546 O93546For retaining pins . . No P90543 P90543 P90543 P90543 P90543 P90543Length . . . . . . . . . . . mm 100 100 100 100 100 100

No 11491

No 11490

No 14398

No 11492

Size Standard-length Deep For ForTeng Tools 9105 Teng Tools 9106R retaining retaining

Length Art. no. Pack. Length Art. no. ring pinmm mm 11490 qty mm 11492 No No24 58 -0103 1 - - O93546 P9054327 58 -0202 1 100 -0101 O93546 P9054330 60 -0301 1 100 -0200 O93546 P9054332 60 -0400 1 100 -0309 O93546 P90543

33 60 -0509 1 100 -0408 O93546 P9054334 60 -0608 1 - - O93546 P9054336 65 -0707 1 - - O93546 P9054338 65 -0806 1 - - O93546 P90543

41 67 -0905 1 - - O93546 P9054346 74 -1002 1 - - O93546 P9054350 80 -1101 1 - - O93546 P9054355 84 -1200 1 - - O93546 P90543

60 87 -1309 1 - - O93546 P9054365 90 -1408 1 - - O93546 P9054370 96 -1507 1 - - O93546 P9054375 98 -1606 1 - - O93546 P90675

80 100 -1705 2 - - O95775 P9067585 100 -1804 2 - - O95775 P9067590 100 -1903 1 - - O95775 P9067595 100 -2000 1 - - O93546 P96075

Insulated Tools

Teng Tools

143


Insulated Tools

Teng

Too

ls

144


Insulated Tools - 1000VPlier- and screwdriver setTeng Tools. Set of 18 pieces. Contains 13 screwdrivers and 5 pliersmanufactured to satisfy EN 60900 for work under voltage up to 1000 volt(by especially trained personnel).

Teng Tools. Set containing 7 insulated screwdrivers with slotted heads, Phillips andPozidriv heads. Manufactured according to the standard EN 60900 for work under voltageup to 1000 volt (by qualified electricians).

Screwdriver SetsTeng Tools. Set including 7 insulated screwdrivers (with slotted heads, Phillips and Pozid-riv/Supadriv heads) manufactured according to the standard EN 60900 for work undervoltage up to 1000 volt (by special electricians).Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13219 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No MDV907PContents:Screwdriver MDV820 . . . . . . . . . . . . . . . . . . . . . . . mm 0.4x2.5-75

MDV824 . . . . . . . . . . . . . . . . . . . . . . . mm 0.8x4-100MDV826 . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5-125MDV840 PH . . . . . . . . . . . . . . . . . . . . No 0-60MDV842 PH . . . . . . . . . . . . . . . . . . . . No 1-80MDV844 PH . . . . . . . . . . . . . . . . . . . . No 2-100MDV864 PZ . . . . . . . . . . . . . . . . . . . . No 2-100

Case dim. LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.47Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11750 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTV907Contents:Screwdriver MDV820 . . . . . . . . . . . . . . . . . . . . . . . mm 0.4×2.5×75Screwdriver MDV824 . . . . . . . . . . . . . . . . . . . . . . . mm 0.8x4.0x100Screwdriver MDV826 . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x5.5x125Screwdriver MDV840 PH . . . . . . . . . . . . . . . . . . . . No 0-60Screwdriver MDV842 PH . . . . . . . . . . . . . . . . . . . . No 1-80Screwdriver MDV844 PH . . . . . . . . . . . . . . . . . . . . No 2-100Screwdriver MDV864 PZ . . . . . . . . . . . . . . . . . . . . No 2-100Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.65

Art. no . . . . . . . . . . . . . . . . . . . . . . . . . . . 13216 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No MRV18No. of pieces. . . . . . . . . . . . . . . . . . . . . . ea. 18Screwdrivers for slotted heads . . . . . . mm 0.4x2.5-75 0.5x3.0-100

1.2x6.5-150for Phillips heads . . . . . . No 0-60 1-80 2-100 3-150for Pozidriv cross heads No 1-80 2-100 3-150

Side cutters, length . . . . . . . . . . . . . . . . mm 150Power side cutters, length . . . . . . . . . . mm 200Combination pliers, length . . . . . . . . . . mm 200Flat nose pliers, length . . . . . . . . . . . . . mm 200Stripping pliers, length . . . . . . . . . . . . . mm 180Case dim. LxWxH . . . . . . . . . . . . . . . . . mm 450x230x105Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.5Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 2No 13216

No 11750

No 13219

Insulated Tools

Teng Tools

145


Plier Set

Teng Tools. Insulated screwdrivers. Manufactured accordingto the standard EN 60900 for work under voltage up to 1000 volt(by qualified electricians).

Screwdrivers - PZ type

Teng Tools. Set of 4 insulated pliers. Manufactured according to thestandard EN 60900 for work under voltage up to 1000 volt (by qualifiedelectricians). Supplied in a plastic TC tray with removable cover. The case fits in TengTools tool boxes and tool trolleys.


Screwdrivers - PH type


Screwdrivers - flat typeInsulated Tools - 1000V

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11749 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTV440Contents:Side cutters MBV441-6, length . . . . . . . . . . . . mm 150Combination pliers MBV451-7, length . . . . . . mm 175Flat nose pliers MBV461-8, length . . . . . . . . . mm 200Stripping pliers MBV499-7, length . . . . . . . . . mm 175Case size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

No 11752

No 11751

No 11753

No 11749

Art. no. . . . . . . . . . . . . . . . . . . . . . 11753 -0105 -0204 -0303 -0402Teng Tools . . . . . . . . . . . . . . . . . . No MDV860 MDV862 MDV864 MDV866For cross heads . . . . . . . . . . . . . . mm 0 1 2 3Blade length . . . . . . . . . . . . . . . . . mm 60 80 100 150handle length . . . . . . . . . . . . . . . . mm 160 185 185 290Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 5

Art. no. . . . . . . . . . . . . . . . . . . . . . 11752 -0106 -0205 -0304 -0403Teng Tools . . . . . . . . . . . . . . . . . . No MDV840 MDV842 MDV844 MDV846For cross heads . . . . . . . . . . . . . . No 0 1 2 3Blade length . . . . . . . . . . . . . . . . . mm 60 80 100 150handle length . . . . . . . . . . . . . . . . mm 160 185 225 290Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10 5

Art. no. . . . . . . . . . . . . . . . 11751 -0107 -0206 -0305 -0404 -0503Teng Tools . . . . . . . . . . . . No MDV820 MDV822 MDV824 MDV826 MDV828Blade t x width. . . . . . . . . . mm 0.4x2.5 0.5x3.0 0.8x4.0 1.0x5.5 1.2x6.5Blade length . . . . . . . . . . . mm 75 100 100 125 150handle length . . . . . . . . . . mm 175 200 210 230 98Pack. . . . . . . . . . . . . . . . . . qty 10 10 10 10 10

Insulated Tools

Teng

Too

ls

146


Insulated Tools - 1000VSide CuttersTeng Tools. Manufactured and tested according to the standard EN60900 for work under voltage up to 1000 volt (by qualified electricians).Single joint. Polished head. Ergonomically designed two componenthandle sleeves.

Teng Tools. Manufactured and tested according to the standard EN60900 for work under voltage up to 1000 volt (by qualified electricians).Single joint. With adjust screw to set the required wire diameter 0.2-3.0mm as well as return spring and ergonomically designed two componenthandle sleeves.

Wire Stripping Pliers

Teng Tools. Manufactured and tested according to the standard EN60900 for work under voltage up to 1000 volt (by qualified electricians).Heavy-duty model with hardened 72° side cutters. With ergonomicallydesigned two component handle sleeves.

Teng Tools. Manufactured and tested according to the standard EN60900 for work under voltage up to 1000 volt (by qualified electricians).Single joint. Polished head. Long, straight jaws. Serrated grip surface.With ergonomically designed two component handle sleeves.

Long Nose Pliers

Combination PliersTeng Tools. Manufactured and tested according to the standard EN60900 for work under voltage up to 1000 volt (by qualified electricians).Heavy-duty model with pipe grip and serrated grip surfaces. With ergo-nomically designed two component handle sleeves.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11763 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . No MBV499-7For wire max. dia. . . . . . . . . . . . . . . mm 0.2-3.0Length. . . . . . . . . . . . . . . . . . . . . . . . mm 180Pack.. . . . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no. . . . . . . . . . . . . . . . . . . . . 11762 -0104Teng Tools . . . . . . . . . . . . . . . . . No MBV461-8Length . . . . . . . . . . . . . . . . . . . . . mm 200Length of nose . . . . . . . . . . . . . . mm 65Pack. . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no.. . . . . . . . . . . . . . 11761 -0105 -0204Teng Tools. . . . . . . . . . . No MBV451-7 MBV451-8Length . . . . . . . . . . . . . . mm 175 200Cuts piano wire . . . . . . . mm 1.5 2.0Pack.. . . . . . . . . . . . . . . . qty 6 6

Art. no. . . . . . . . . . . . . . . . . . . . . . 11759 -0109Teng Tools . . . . . . . . . . . . . . . . . . No MBV442-8Length. . . . . . . . . . . . . . . . . . . . . . mm 200Cuts piano wire . . . . . . . . . . . . . . mm 2.5Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no. . . . . . . . . . . . . . . . . . . . . . 11758 -0100Teng Tools . . . . . . . . . . . . . . . . . . No MBV441-6Length. . . . . . . . . . . . . . . . . . . . . . mm 150Cuts piano wire . . . . . . . . . . . . . . mm 0.5Pack.. . . . . . . . . . . . . . . . . . . . . . . qty 6

No 11761

No 11759

No 11762

No 11758

No 11763

Service Tools

Teng Tools

147


Hose Clamps

Teng Tools. Special designed jaws prevents internal hose linings fromdestruction. Lightweight easy to handle and non conductive safety. 3sizes to fit all types of hose.

Teng Tools. Special designed jaws prevents internal hose linings fromdestruction. Lightweight easy to handle and non conductive safety. 3 sizes that fit most hose sizes.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools toolboxes and tool trolleys.

Hose Clamp Set

Oil Service KitTeng Tools. Set consisting of 6 double ended drain plug sockets, 2, 6-point spark plugsockets, 1 oil filter wrench, 2 extension bars 75 and 250mm long, adaptor drive 1⁄2″-3⁄8″, 3⁄8″drive socket 21mm, telescopic inspection mirror with magnet and a set of feeler gauges.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. 20 blades in millimetre sizes and a non magnetic blade 0.10 mm. Formeasuring slots, bearing play, etc. Nickel-plated, lockable holder and conicalblade.

Feeler Gauge

Teng Tools. Plastic protective mat with magnetic strips. Used to protect paintedsurfaces when repairing cars.

Protecting Wing CoverAuto Tools

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11686 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No FG21No. of blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ea. 21Measurement range . . . . . . . . . . . . . . . . . . . . . . . mm 0.05-1.00Non magnetic brass blade . . . . . . . . . . . . . . . . . . mm 0.10Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6

Art. no. . . . . . . . . . . . . . . . . . . . . 10948 -0103Teng Tools . . . . . . . . . . . . . . . . . No FC-01Size HxW . . . . . . . . . . . . . . . . . . mm 400x1070

Art. no . . . . . . . . . . . . . . . . 11773 -0101 -0200 -0309Teng Tools . . . . . . . . . . . . No AT080 AT085 AT090 Length . . . . . . . . . . . . . . . . mm 155 185 250Jaw length. . . . . . . . . . . . . mm 20 38 75For hosediameter. . . . . . . inch 1⁄4-3⁄4 1⁄4-11⁄4 3⁄4-21⁄4Pack. . . . . . . . . . . . . . . . . . qty 5 5 5

Art. no. . . . . . . . . . . . . . . . . . 11842 -0108Teng Tools. . . . . . . . . . . . . . . No TTHC03Number of clamps . . . . . . . . 3For hose diameter . . . . . . . . inch 1⁄4-3⁄4, 1⁄4-11⁄4, 3⁄4-21⁄4Case size LxWxH . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . kg 0.49

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0396 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTOS16No. of pieces. . . . . . . . . . . . . . . . . . . . . . . 16Size of drain plug sockets. . . . . . . . . . . . g 5⁄16x3⁄8g, ❒ 11x12 g,

g 17x1⁄2g, ❒ 8x3⁄8 ❒❒13x14 g, g 8x10 g

Spark plug sockets 3⁄8″ . . . . . . . . . . . . . . mm 16, 21Extension bars3⁄8″ , length . . . . . . . . . . . mm 75, 250Feeler gauge (21 blades) . . . . . . . . . . . . mm 0.05-1.00Case size LxWxH. . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.8

No 11842

No 11773

No 11686

No 10948

No 0396

Service Tools

Teng

Too

ls

148


Teng Tools. Hook wrench specially designed for adjusting rear shock absorbers on mo-torbikes.

Rear Shok Absorber Adjuster Hook Tool

Teng Tools. Separate plug sockets with different shapes and sizes suitable for drain plugsin engines and gearboxes.

Individual Drain Plugs

Teng Tools. Used for assembling and dismantling oil filters With rubberlined belt.

Oil Filter Wrenches

Teng Tools. For assembling and dismantling oil filters With1⁄2″ ❒-drivefor socket tools.No 9110. With nylon strap.No 9120. With chain.

Strap Oil Filter Wrench

Teng Tools. Multi function pliers with adjustable opening 53-118 mm.Chrome vanadium steel, hardened, nickel-plated, drop forged jaws.Self-locking and with quick release.

Auto ToolsOil Filter Remover Plier

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11778 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No 409Adjustable opening . . . . . . . . . . . . . . . . . mm 53-118Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . . . . . . . . . . 11231 -0107 -0206Teng Tools . . . . . . . . . . . . . . . . No 9110 9120Drive ❒ . . . . . . . . . . . . . . . . . . . inch 1⁄2 1⁄2Capacity . . . . . . . . . . . . . . . . . . mm 130 120Pack. . . . . . . . . . . . . . . . . . . . . . qty 12 12

Spare strap/chain . . . . . . . . . 11231 -0156 -0255Teng Tools . . . . . . . . . . . . . . . . No 9110RK 9120RKPack. . . . . . . . . . . . . . . . . . . . . . qty 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13222 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No HP301For diameters . . . . . . . . . . . . . . . . . . . . . . . . . mm 65-70Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11231 -0305Teng Tools . . . . . . . . . . . . . . . . . . . . . No 9123Length. . . . . . . . . . . . . . . . . . . . . . . . . mm 230Span width max. . . . . . . . . . . . . . . . . mm 160Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Spare belt . . . . . . . . . . . . . . . . . . . . . 11231 -0404Teng Tools . . . . . . . . . . . . . . . . . . . . . No 9123RK

Art. no. . . . . . . . . . . . . . . . . . . . 6257 -1005 -1104 -1203Teng Tools . . . . . . . . . . . . . . . . No DP0810 DP0812 DP1012Drain plug socket dim.. . . . . . . g 8x10 g ❒ 8x3⁄8 ❒ g 5⁄16x3⁄8gPack. . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . 6257 -1302 -1401 -1500Teng Tools . . . . . . . . . . . . . . . . No DP1112 DP1314 DP1716Drain plug socket dim.. . . . . . . ❒ 11x12 g ❒ 13x14 g g 17x1⁄2gPack. . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

No 13222

No 6257/Pluggsocket

No 11778

No 11231-0305

No 11231-0107

No 11231-0206

Service Tools

Teng Tools

149


Teng Tools. The the head is filled with fine steel particles to prevent the hammerfrom bouncing back after striking. Black.

Dead Blow Hammers

Crown Face Body Hammers

Teng Tools. Tool set of 5 pieces for body work. Two polyuret-hane hammers and three different dressing hammers.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Auto Body Hammer Set

Teng Tools. Pipe/flange tool set containing 10 parts for copper brass and thin walledaluminium pipe. The pipe cutter cuts pipe up to 32 mm. The flange tool draws up pipe ends to45° on pipe diameters 4-14 mm.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Auto ToolsFlaring tool set

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14404 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTF10Contents:Pipe cutter, Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3-32Flanging tool, 2 parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 8 10Flange adapters for pipe diameters . . . . . . . . . . . . . . . . . mm 4, 4.75, 6, 8,

10, 12, 14Insert size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.7

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12244 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTPSADPolyurethane hammer, head diameter . . mm 35, 55Dressing hammer with straight pen . . . . . g 325Dressing hammer with crowned face. . . . g 325Dressing hammer med round + sq. faces g 325Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 570x262x56Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.76

Art. no. . . . . . . . . . . . . . . . . . . . 11787 -0105 -0204Teng Tools . . . . . . . . . . . . . . . . No HMD35 HMD55Head diameter . . . . . . . . . . . . . mm 35 55Weight . . . . . . . . . . . . . . . . . . . . g 300 980Pack. . . . . . . . . . . . . . . . . . . . . . qty 6 6

HMBH01

No 11787

HMBH02

No 12244

No 14404

HMBH03

Teng Tools. For body work, etc. Hickory handle.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11790 -0100 -0209 -0308Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HMBH01 HMBH02 HMBH03Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Round, flat head

+ pointCrowned head

+ pointDressing hammer

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 325 325 325Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . g 400 350 400Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6 6 6

Separate wooden handle + handle wedge . . . . . . . 11790 -1009 -1009 -1009Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HMBHRK HMBHRK HMBHRKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Service Tools

Teng

Too

ls

150


Auto ToolsSpecialist Sockets

Teng Tools. Specialist automotive impactsockets.

Tyre balance weight plier

Teng Tools. Set of 7 specialist sockets for applications in cars (oxygen sensor socket,injector socket, vaccum switch socket, oil sender socket, heated oxygen socket and offsetoxygen sensor wrench).Supplied in a plastic TC tray with removeable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Multi-function pliers for removing, trimming and attachingbalance weights on rims.

AT350

Art. no. . . . . . . . . . . . . . . . . . . . . 11792 -0108Teng Tools . . . . . . . . . . . . . . . . . No AT215Length. . . . . . . . . . . . . . . . . . . . . mm 245Pack. . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 14434 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . No TTSS07Number of sockets. . . . . . . . . . . . . . . qty 7Teng Tools socket number. . . . . . . . AT350, AT355, AT360, AT365,

AT370, AT375, AT380Case size LxWxH. . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.5

No 11792

AT355

No 14434

No 11681

Art. no. Teng Tools Drive Size Length Suitable Pack.for

No ❒ mm qty11487-3003 920242 1⁄2″ 15⁄16″ 78 Wheel nuts 1011487-3102 920248 1⁄2″ 11⁄2″ 78 Ball joints 1011681-0300 940258 3⁄4″ 113⁄16″ 67 Ball joints 110178-1706 920624 1⁄2″ 24 mm 78 Oil-pressure switch 1010178-1805 920627 1⁄2″ 27 mm 78 Diesel injectors 1010178-1904 920628 1⁄2″ 28 mm 78 Diesel injectors 1010178-2001 920629 1⁄2 29 mm 78 Thermostat switch 10

10178-2100 920630 1⁄2″ 30 mm 78 Hub nuts 1010178-2209 920632 1⁄2″ 32 mm 78 Hub nuts/drive shafts 1010178-2308 920635 1⁄2″ 35 mm 78 Hub nuts 1010178-2407 920636 1⁄2″ 36 mm 78 Hub nuts 1011489-1005 940641 3⁄4″ 41 mm 58 Hub nuts 111681-1308 120955 1⁄2″ TX 55 125 Cylinder head bolts 1011681-1407 120970 1⁄2″ TX 70 100 Cylinder head bolts 10

AT360 AT365 AT370 AT375 AT380

Teng Tools. Special sockets different automotive applications.

Art. no. Teng Tools Size Size Length Intended Pack.diameter drive for

No ❒ mm qty12867-0106 AT350 29 mm 1⁄2″ 90.0 Socket for lambda sond 1012867-0205 AT355 22 mm 3⁄8″ 90.0 Socket for lambda sond 1012868-0105 AT360 27 mm 1⁄2″ 85.0 Socket for fuel nozzle 1012869-0104 AT365 7⁄8″ 3⁄8″ 80.0 Socket for vacuum connector 1012870-0101 AT370 1 1⁄16″ 3⁄8″ 74.0 Socket for oil pressure sensor 1012871-0100 AT375 7⁄8″ 1⁄2″ 50.0 Lambda sond tool 1012872-0109 AT380 7⁄8″ 3⁄8″ 30.0 Lambda sond tool 10

Service Tools

Teng Tools

151


Teng Tools. Heavy-duty prybar equipped with through blade, strikinghead. Ergonomically designed plastic handle.

Pry Bars

Teng Tools. Set of 3 roll bars. Equipped with through blade,striking head and ergonomically designed plastic handle.Fits in Teng Tools tool boxes and tool trolleys.

Pry Bar Set

Teng Tools. Medium carbon steel. HRC 40 ±2°.

Tyre Levers

Teng Tools. Set for Blind nuts M 3, M 4, M 5 and M 6 as well as 20 Blind nuts of each size.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Heavy Duty Nut Sert Tool Set

Teng Tools. Five piece set consisting of three wheel nut sock-ets for domed cap nuts, tyre balancing weight pliers and a 1⁄2″torque wrench.Supplied in a plastic TC tray with removable cover. Fits in TengTools tool boxes and tool trolleys.

Auto Tools

Wheel Tool Set

Wheel WrenchTeng Tools. With double ended impact socket. Extendable for better power when removingwheel nuts. Chrome vanadium steel.

Art. no. . . . . . . . . . . 11811 -0105 -0204 -0303Teng Tools . . . . . . . No PB12A PB18A PB22ATotal length . . . . . . mm 300 450 550Pack. . . . . . . . . . . . . qty 6 6 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12249 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTXW05Wheel nut sockets 1⁄2″-drive . . . . . . . . . mm 17 19 21Tyre balancing weight pliers, length. . . mm 245Torque wrench 1⁄2″-drive . . . . . . . . . . . . Nm 40-210Case size LxWxH . . . . . . . . . . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 3.0

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10619 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTNR81With nose bush for POP-nut. . . . . . . . . . . . . . . thread M 3, M 4, M 5, M 6Rivet sizes (20 of each). . . . . . . . . . . . . . . . . . . thread M 3, M 4, M 5, M 6Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.0

Art. no. . . . . . . . . . . . . 11786 -0106Teng Tools . . . . . . . . . No TTXPB3ALengths . . . . . . . . . . . . mm 300 450 550Case size . . . . . . . . . . mm 560x110x74Weight . . . . . . . . . . . . . kg 1.8

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7317 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 1202Drive ❒ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 17 19Length retracted/extended . . . . . . . . . . . . . . . . . . . . . . . . . mm 350/550Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no.. . . . . 15154 -0101 -0200 -0309 -0408Teng Tools. . No AT20512 AT20516 AT20520 AT20524Length . . . . . mm 304 406 508 609Weight . . . . . kg 0.284 0.467 0.610 0.753Pack. . . . . . . qty 10 10 5 5

No 15154

No 7317

No 10619

No 11786

Type PB12A

No 12249

Type PB18A

Type PB22A

Service Tools

Teng

Too

ls

152


Roll/Heel BarsTeng Tools. Set of 3 prybars. Round, ground point at one end -flat hook shaped prybar at the other.Supplied in TTX tray suitable for Teng Tools tool boxes and tooltrolleys.

Teng Tools. Round, ground point at one end - flat hook shaped prybar atthe other.

Teng Tools. The reliable model for fast revoval of pulleys, wheels, ball bearings, etc.Strong drop forged design. Reversible hooks permit use as an internal puller. Availableextras are replaceable hooks for various clamping rreaches. Spindle may be exchanged forhydraulic pressure spindle.

2 in 1 Puller SetTeng Tools. Set consisting of a threelegged combination puller with an extra yoke forswitching to twolegged pulling. With reversible legs for internal and external grip. Manufac-tured of chrome vanadium steel.Supplied in a plastic TC tray with removable cover. The case fits in Teng Tools tool boxesand tool trolleys.

Teng Tools. Workshop rack for placement on a bench. The rack includes 5 pullers (one ineach size). The pullers are adjustable for internal and external pulling.

Gear Pullers

Art. no. . . . . . . . . . . . . . . . . . 14393 -0105 -0204 -0303 -0402 -0501Teng Tools . . . . . . . . . . . . . . No SP1410 SP1810 SP2215 SP2615 SP3320Clamping width internal.. . . mm 90 130 160 200 250Clamping width external. . . mm 140 180 220 260 330Max. reach . . . . . . . . . . . . . . mm 100 100 150 150 200Spindle thread . . . . . . . . . . . M14x1.5 M14x1.5 M20x2 M20x2 M26x2Spindle length . . . . . . . . . . . mm 140 140 210 210 280Spindle opening. . . . . . . . . . mm 17 17 22 22 27Claw depth . . . . . . . . . . . . . . mm 12 12 18 18 28Claw thickness. . . . . . . . . . . mm 3.0 3.0 3.5 3.5 6.5Weight. . . . . . . . . . . . . . . . . . kg 1.1 1.3 3.2 3.6 7.8

Art. no.. . . . . . . . . . . . . . . . . . 10069 -0106Teng Tools. . . . . . . . . . . . . . . No TTXPB3Lengths . . . . . . . . . . . . . . . . . mm 300 400 500Case size LxWxH . . . . . . . . . mm 560x110x40Weight . . . . . . . . . . . . . . . . . . kg 1.75

Artnr . . . . . . . . . . . . . 11698 -0103 -0202 -0301Teng Tools . . . . . . . . No PB12 PB16 PB20Length. . . . . . . . . . . . mm 300 400 500Pack. . . . . . . . . . . . . . qty 10 10 10

Art. no. . . . . . . . . . . . . . . . . . 14474 -0107Teng Tools . . . . . . . . . . . . . . No DIS-SP05Includes pullers . . . . . . . . . . No SP1410, SP1810, SP2215,

SP2615, SP3320

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0398 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No TT804Clamping width . . . . . . . . . . . . . . . . . . . . . . . mm 130Clamping depth . . . . . . . . . . . . . . . . . . . . . . . mm 100Case size LxWxH . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.2

No 0398

No 11698

No 14474

No 10069

No 14393

Service Tools

Teng Tools

153


Teng Tools. 17 piece set containing one tap and one die of each dimension as well as a tapwrench one diestock and a screw pitch gauge.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.Spare dies see 11683.

Tap and Die Rethreading Set

Teng Tools. Set of 11 pieces containing 5 screw extractors, 4 stud bolt extractors as well as2 nut splitters.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Stud and Nut Remover Set

Teng Tools. Three arm puller with special yoke for both 2 as well as 3-arm pulling.

Teng Tools. Three arm puller with special yoke for both 2 as well as 3-arm pulling.

Gear Pullers

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12842 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SP22Clamping depth . . . . . . . . . . . . . . . . . . . . . . . . . mm 137Span width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 78-178Spindle length . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 290Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.7

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 13191 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No SP11Spread . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 76-102Max. reach. . . . . . . . . . . . . . . . . . . . . . . . mm 89Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.2

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6934 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No TTSN11Contents:Screw extractor . . . . . . . . . . . . . . . . . . . . inch 5⁄64 7⁄64 5⁄32 1⁄4 19⁄64

Stud bolt extractor . . . . . . . . . . . . . . . . . . mm 6 8 10 12Nut splitter. . . . . . . . . . . . . . . . . . . . . . . . . mm 5-20 14-27Case size LxWxH. . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.3

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 6919 -0106Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . No TTTD17Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 3 M 4 M 5 M 6

M 8 M 10 M 12Case size LxWxH . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8

No 13191

No 12842

No 6934

No 6919

Service Tools

Teng

Too

ls

154


Replacement parts for TTTD17Teng Tools. Separate dies and taps, suitable as replacement parts for Teng Tools Tap andDie set TTTD17.

Teng Tools. Adjustable tap wrench used together with taps,reamers and screw extractors.

Individual Tap Handle

Teng Tools. Diestock for Teng Tools dies. With screw to securethe die.

Screw Extractor Set

Teng Tools. Sepatate screw extractors. For quick and easy way to remove broken screws,pipes, bolts and studs. Square shank. Hardened to HRC 50-52.

Teng Tools. Set including 5 extractors with left-hand spiral. For extraction of broken screwsand bolts.Supplied in plastic case.

Individual Screw Extractors

Individual Die Handle

Teng Tools. 5 piece scsrew extractor set. For quidck and easy way to remove brokenscrews, pipes bolts and studs. Square shank. HRC 50-52.

Art. no. . . . . . . . . . . . . . . . . . . . . . 11694 -0107Teng Tools . . . . . . . . . . . . . . . . . . No TAP-HNDLMax. square opening . . . . . . . . . mm 3-12Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 30

Art. no. . . . . . . . 15146 -0102 -0201 -0300 -0409 -0508Teng Tools . . . . No SEL01S SEL02S SEL03S SEL04S SEL05SFor drill hole . . . mm 3 (1⁄8″) 4 (3⁄16″) 5 (15⁄64″) 7 (5⁄16″) 9 (3⁄8″)Pack. . . . . . . . . . qty 10 10 10 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 15145 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . No SE05SFor drill holes . . . . . . . . . . . . . . . . . . . . mm 3, 4, 5, 7, 9Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . set 5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11693 -0108Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . No SE05Number of screw extractors . . . . . . . . . . . . . . ea. 5For screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M 6 - M 20For drill bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.8 3.5 4.0 6.35 7.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sts 10

Art. no.. . . . . . . . . . . . 14410 -0104Teng Tools. . . . . . . . . No DIE-HANDLEFor die . . . . . . . . . . . . M 3-12

Art. no. Product Thread Pitch Pack.design- ation

11683 mm qty-0100 Die M 3 0.5 1-0209 Die M 4 0.7 1-0308 Die M 5 0.8 1-0407 Die M 6 1.0 1-0506 Die M 8 1.25 1-0605 Die M 10 1.5 1-0704 Die M 12 1.75 1

-1009 Tap M 3 0.5 10-1108 Tap M 4 0.7 1-1207 Tap M 5 0.8 1-1306 Tap M 6 1.0 1-1405 Tap M 8 1.25 1-1504 Tap M 10 1.5 1-1603 Tap M 12 1.75 1

No 11694

No 14410

Nr 15146

Nr 15145

No 11693

Die

Tap

Service Tools

Teng Tools

155


Crimping Tool Set

Teng Tools. Three spare heads for crimp system pliers CP04.

Teng Tools. Set consisting of crimping tool CP50 with slots for crimping red, blue andyellow terminals and cutters for bolts and wire. Also included in the assortment are 120terminals of varying types coloured red and blue.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Set consists of a crimping tool with three exchangeable heads for insulatedand non insulated terminals and a 2.5 mm hex key.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Changeable Ratchet Crimping Tool Set

Teng Tools. For inserting and extracting stud bolts. One eccentric journalled, knurledwheel grips against an internal fluting.

Stud Extractor

Nut Splitter SetTeng Tools. Set of two nut splitters. Easy splitting of nuts that have rusted fast withoutdamaging the bolt or thread.

Roller Type Stud ExtractorsTeng Tools. Reversible. Hexagon drive end and int. 1⁄2″ ❒-drive.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11038 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTCP121Contains: crimping tool . . . . . . . . . . . . . . . . . . . . . . . quantity 1

terminals assorted . . . . . . . . . . . . . . . . . . quantity 120Insert size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11697 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 2300For screw diameters . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 5.5-19Int. ❒-drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11695 -0106Teng Tools . . . . . . . . . . . . . . . . . . . No NS02Opening . . . . . . . . . . . . . . . . . . . . . mm 5-20 14-27For nuts . . . . . . . . . . . . . . . . . . . . . M 2.5-12 8-18Pack.. . . . . . . . . . . . . . . . . . . . . . . . sts 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12247 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTCP04Head for insulated terminals . . . . . . . . . . . . . . . . . . . . . . mm2 0.324-5.261Head for non insulated terminals . . . . . . . . . . . . . . . . . . mm2 0.324-3.31Head for insulated terminals . . . . . . . . . . . . . . . . . . . . . . mm2 0.3-8Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.8

Art. no . . . . . . . . . . . . . 11696 -0105 -0204 -0303 -0402Teng Tools. . . . . . . . . . No ST120506-C ST12508-C ST12510-C ST12512-CFor screw diameters. . mm 6 8 10 12Drive ❒ . . . . . . . . . . . . . inch 1⁄2 1⁄2 1⁄2 1⁄2Pack.. . . . . . . . . . . . . . . qty 10 10 10 10

Art. no.. . . . . . . . . . . . . . . . . . . . . . . 12247 -0206 -0305 -0404Teng Tools. . . . . . . . . . . . . . . . . . . . No CP04RK1 CP04RK2 CP04RK3For insulated terminals . . . . . . . . . mm2 0.324-5.261 - 0.3-8For non insulated terminals. . . . . . mm2 - 0.324-3.21 -Pack. . . . . . . . . . . . . . . . . . . . . . . . . sts 10 10 10

No 11038

Spare heads

No 12247

No 11697

No 11696

No 11695

Service Tools

Teng

Too

ls

156


Crimping and Wire Stripping ToolsTeng Tools. Automatic lock mechanism ensures that crimping is fi-nished correctly. For insulated and non insulated terminations and for rollcrimping. Cutting edge for bolts M2-M5. Stripping of conductors 0.75-6mm2.

Teng Tools. Stainless steel tray with plastic enclosed magnet which does not damage thecar paintwork. For screws, nuts and washers, etc. Can be secured on its side as well asupside down. Ideal for working under cars, etc.

Magnetic Bits Tray

Teng Tools. For crimping terminals and splices without soldering. Withshears for cutting bolts without damaging the threads. Special edges forcutting the conductor wire. Special stripping edges. Colour coded crim-ping slots for crimping terminals by the conductor wire. Plastic coveredhandles.No CP50. Crimps insulated and non insulated terminals.No CP51. Crimps insulated splices and roll crimping.

Teng Tools. Magnetic block for holding plate and pipes etc. for welding and mounting workat 90° or 45° angles. Intended for both flat and round workpieces.

Welding Magnets

Auto Electricians Circuit TesterTeng Tools. For light testing on cars. Of brass Well protected bulb.Needle point for inserting in insulation. With protective sleeve, cable andclip. Nickel-plated.

Magnetic Tools

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1561 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 580Diameter of tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 150

Art. no. . . . . . . . . . . . . . . . . . . . . 3730 -0100 -0209Teng Tools . . . . . . . . . . . . . . . . . No MH75 MH90Max width . . . . . . . . . . . . . . . . . . mm 120 160Height. . . . . . . . . . . . . . . . . . . . . . mm 82 100Magnetic pull. . . . . . . . . . . . . . . . approx. N 27 27Weight . . . . . . . . . . . . . . . . . . . . . g 300 700Pack. . . . . . . . . . . . . . . . . . . . . . . qty 12 12

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2646 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No 9850For voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . V 6-24Needle point, length. . . . . . . . . . . . . . . . . . . . mm 10Total length . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 120Cable length . . . . . . . . . . . . . . . . . . . . . . . . . . mm 520Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12839 -0101Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No CP52Total length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 225For insulated terminals . . . . . . . . . . . . . . . . . . . . . mm2 1.5-6For non insulated terminals. . . . . . . . . . . . . . . . . . mm2 1.5-2.5Stripping edge for conductor area . . . . . . . . . . . . mm2 0.75-6Cutting edge for bolts . . . . . . . . . . . . . . . . . . . . . . . M 2-5Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

No 5834

No 2646

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5834 -0209 -0308Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No CP50 CP51Total length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 225 225For insulated terminals . . . . . . . . . . . . . . . . . . . . . . . . . mm2 0.75-6 0.75-6For non insulated terminals . . . . . . . . . . . . . . . . . . . . . mm2 1.5-6 0.5-2.5Shears for cutting bolts . . . . . . . . . . . . . . . . . . . . . . . . . M 2.5 3 3.5 4 5 2.5 3 3.5 4 5Stripping edge for conductor area. . . . . . . . . . . . . . . . mm2 0.75 1.0 1.5 2.5 4 6 0.75 1.0 1.5 2.5 4 6Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10

No 3730

No 12839

No 1561

Service Tools

Teng Tools

157


Teng Tools. Telescopic inspection mirror with swivel head and pocket-clip.

Telescopic Mirror

Teng Tools. Telescopic magnifying glass with swivel head and pocket-clip.

Telescopic Magnifying Glass

Teng Tools. Set containing flexible and telescopic pick ups, magnifyling glass, inspectionmirror, flexible claw pick up, LED flash light and batteries.Supplied in plastic TC tray with removeable cover. Fit in Teng Tools tool boxes and tooltrolleys.

Pick up Tool Set with lamp

Teng Tools. Containing three telescopic tools - an inspection mirror, magnifying glass andmagnet. All with pocket clip.Supplied in a plastic insert case with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Inspection Tool Set

Teng Tools. Combined magnetic pick up and pen. Unscrewingthe magnet allows the magnetic pick up to be used as pen.Handle with 5 extending parts. The magnet picks up magneticcomponents in areas difficult to access. With pocket-clip.

Telescopic Magpen

Teng Tools. Large stainless magnetic bowl with two magnets inset in plastic that will notdamage the car paintwork. For screws, nuts and washers, etc. and even larger parts. Canbe secured on its side as well as upside down. Ideal for working under cars, etc.

Teng Tools. Telescopic inspection mirror with powerful magnetand scriber. With pocket clip.

Deep Magnetic TrayMagnetic Tools

3 in 1 Inspection Tools

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11227 -0103Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 581TMGMagnifying glass diameter . . . . . . . . . . . . . . . . . . . . . . . mm 55Length, fully extended . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 850Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14437 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTM08Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.1

Art. no. . . . . . . . . . . . . . . . . . . . . . . 11847 -0103Teng Tools . . . . . . . . . . . . . . . . . . . No 580ASize LxWxH. . . . . . . . . . . . . . . . . . . mm 320x150x70

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10946 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTTM03Diameter of mirror/magnifying glass . . . . . . . . . . . . . . . . . mm 55Extendable length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 590Diameter of magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 12Case size LxWxH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 0420 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . No 5850MPLength retracted . . . . . . . . . . . . . . . . mm 135Length fully extended . . . . . . . . . . . . mm 540Diameter of magnet . . . . . . . . . . . . . mm 6Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 50

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11228 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No 581TMIMirror diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 57Length, fully extended . . . . . . . . . . . . . . . . . . . . . . . . . mm 850Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 3568 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . No 5820MILength fully extended . . . . . . . . . . . . . mm 570Mirror diameter . . . . . . . . . . . . . . . . . . mm 32Diameter of magnet . . . . . . . . . . . . . . mm 6Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

No 11227

No 11228

No 14437

No 11847

No 10946

No 0420

No 3568

Service Tools

Teng

Too

ls

158


Teng Tools. Panel with six permanent magnets. Each magnet holds 450 grams. Suitablefor wall-mounting and for Teng Tools toolboxes and trollies.

Magnetic Tool Holder

Flexible LightTeng Tools. Flexible, adjustable light for use in confined areas. Withmagnet.Supplied without batteries.Suitable batteries 2 x R6.

Teng Tools. Used to magnetise screwdriver tips for holding screws, or to demagnetisetools where a magnetic force can be a hinder.

Magnetic Charger

Claw Pick Up ToolTeng Tools. Consists of a flexible wire with non-magnetic grip-per - adjustable from the spring handle. For holding and pickingup small objects such as screws and nuts in difficult to accessareas.

Teng Tools. Telescopic magnetic pick-up with powerful mag-net, picks up magnetic components in inaccessible areas. Withplastic handle.

LED TorchesTeng Tools. LED torch with white light. Brass body, satin finish. Lamp give 80,000 hours oflife. For 2 batteries type AAA.

Teng Tools. Telescopic magnetic pick-up with pocket-clip. Themagnet picks up magnetic components in areas difficult to ac-cess.

Telescopic Magnetic Pick UpsMagnetic Tools

Art. no. . . . . . . . . . . . . . . . . . . . . . 11776 -0108Teng Tools . . . . . . . . . . . . . . . . . . No AT135No. of grip claws . . . . . . . . . . . . . 4Total length. . . . . . . . . . . . . . . . . . mm 600Pack. . . . . . . . . . . . . . . . . . . . . . . . qty 12

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6906 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No 586Total length . . . . . . . . . . . . . . . . . . . . . . . . . . mm 595Flexible length . . . . . . . . . . . . . . . . . . . . . . . mm 400Max. magnet force . . . . . . . . . . . . . . . . . . . . g 750Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 12

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14433 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No 584Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 130Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 0345 -0202Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TC-MAGSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 457x52Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 12

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 6060 -0103Teng Tools . . . . . . . . . . . . . . . . . . . . . No MR500Size . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 60×30×20Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . 11679 -0106Teng Tools . . . . . . . . . . . . . . . . . . . . . No SD501Diameter of magnet . . . . . . . . . . . . . . mm 7Length retracted . . . . . . . . . . . . . . . . . mm 160Length fully extended . . . . . . . . . . . . mm 550Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 50

Art. no. . . . . . . . . . . . . . . . . . . . . . . . 11229 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . No 581TMPDiameter of magnet. . . . . . . . . . . . . mm 12Length fully extended . . . . . . . . . . . mm 850Pack. . . . . . . . . . . . . . . . . . . . . . . . . . qty 20

No 14433

No 11229

No 11776

No 11679

No 6906

No 6060

No 0345

Service Tools

Teng Tools

159


LED TorchesTeng Tools. LED-flashlight with non slip rubber handle, click swich on/off, waterproof andinsulated with 80.000 hour life LED bulb.Suitable batteries 2 pcs type AA.

4 in 1 Hook and Pick Set

Teng Tools. Shaped bar. Ball-jointed shoe. With flexible two component handle for bestgrip when tightening and releasing.

Teng Tools. Set consisting of 125 mm long aluminium handle with magnet andfour different hooks with knurled shaft. The hooks are fitted on the aluminiumhandle when assembling and dismantling O-rings, gaskets and springs.

Clamps

Scraper and Remover SetTeng Tools. Set of 4 parts including a gasket scrape, two hooks and a piercer.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Teng Tools. Separate parts included in set TTSR04.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12837 -0103 -0202 -0301Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No CMF16T CMF20T CMF25TSpan width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 160 200 250Throat depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 80 100 120Bar dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 16.5x7.5 19.5x9.5 22x10.5Max clamping force (for clamping width 150 mm) Nm 2500 4000 5500Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5 5 3

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12837 -0509 -0400Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No CMF35T CMF30TSpan width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 300 300Throat depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 100 140Bar dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 19.5x9.5 25x12Max clamping force (for clamping width 150 mm) Nm 4000 6500Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5 3

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13239 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No 585Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . 4002 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . No AT149Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5

Art. no. . . . . . . . . 11769-0206 11769-0305Teng Tools . . . . . No MDH-L MDH-SProduct . . . . . . . . Dismantling. hook Dismantling hook Pack. . . . . . . . . . . qty 10 10

Art. no. . . . . . . . . 6309-0104 0313-0101Teng Tools . . . . . No MDH-R MD-SCRProduct . . . . . . . . Piercer Gasket scraperPack. . . . . . . . . . . qty 10 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11769 -0107Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No TTSR04Case size LxWxH . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.43

No 11769-0206

No 11769

No 4002

No 13239

No 12837

No 11769-0305

No 6309-0104

No 0313-0101

Service Tools

Teng

Too

ls

160


ClampsTeng Tools. Shaped steel bar. Pivoted shoe. Galvanized with T-handle.

Hand RivetersTeng Tools. For professional use in construction and industrial applica-tions with 4 nose bushes (for rivets 2.4, 3.2, 4.0 and 4.8 mm) and plasticcovered handles.

Teng Tools. For professional use in construction and industrial applica-tions. 3 jaws, giving a better grip and release of the nail. Lattice designgives large riveting force and is very suitable for use in areas difficult toaccess. Long nose for good access. With 5 nose bushes (for rivet dim.3.2, 4.0, 4.8, 6.0 and 6.4 mm) and plastic covered handles.

Teng Tools. Body - heavy steel plate. Supplied with 3 nose bushes andplastic covered handles.

Teng Tools. Intended for handicrafts and industry. Plastic coveredhandles. Supplied with 4 nose bushes for rivets 2.4, 3.2 4.0 and 4.8 mm.

Heavy Duty Rivet Guns

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . utg.Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No HRLT01Max. rivet dim. al-rivet. . . . . . . . . . . . . . . . . mm 6.4

steel . . . . . . . . . . . . . . . . . . mm 6.4stainless . . . . . . . . . . . . . . . mm 6.4

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 320-830Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.0

Nozzle set (5) . . . . . . . . . . . . . . . . . . . . . . . 11308 -0204

Spare part set . . . . . . . . . . . . . . . . . . . . . . . 11308 -0303

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12836 -0104 -0203 -0302Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No CMF16 CMF20 CMF25Span width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 160 200 250Throat depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 80 100 120Bar dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 16.5x7.5 19.5x9.5 22x10.5Max clamping force (for clamping width 150 mm) . Nm 2500 4000 5500Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 5 5 3

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12836 -0500 -0401Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No CMF35 CMF30Span width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 300 300Throat depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 120 140Bar dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 25x12 25x12Max clamping force (for clamping width 150 mm) . Nm 7500 6500Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 1 3

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15173 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HR30RFor rivets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 2.4 3.2 4.0 4.8Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.56

Set of 4 nose bushes . . . . . . . . . . . . . . . . . . . 4849 -2102

Spare part set (jaws, charger, spring) . . . . 4849 -2201

Art. no.. . . . . . . . . . . . . . . 6907 -0100Teng Tools. . . . . . . . . . . . No HR01Length . . . . . . . . . . . . . . . mm 250For rivet . . . . . . . . . . . . . . mm 2.4 3.2 4.0 4.8Pack.. . . . . . . . . . . . . . . . . qty 10

Art. no.. . . . . . . . . . . . . . . . . . 11682 -0101Teng Tools. . . . . . . . . . . . . . . No HR14For aluminium rivets. . . . . . . mm 2.4/3.0/3.2 4.0 4.8/5.0For steel rivets . . . . . . . . . . . mm 2.4/3.0/3.2 4.0 4.8/5.0Length . . . . . . . . . . . . . . . . . . mm 270Weight . . . . . . . . . . . . . . . . . . kg 0.63Pack. . . . . . . . . . . . . . . . . . . . qty 10

No 11682

Nr 15173

No 6907

No 12836

Nr 11687

Service Tools

Teng Tools

161


Teng Tools. Yellow tape. Plastic case with flat underside for internal measuring. Self-retracting tape, with lock, self-aligning end hook. Belt clip. Graduated on one side. Scale:Metric/Imperial.Scale zero point according to alt. IV Graduation tolerance according to precision standard EU II page 0000.

Measuring TapesMeasuring Tools

Teng Tools. For professional use in construction and industrial applications.Two-hand grip gives large riveting capacity. Draw-rod with compound action forquick loading and unloading. Mandrel for M5, M6, M8 and M10 included. Plasticcovered handles.Supplied in metal case.

Teng Tools. For use in construction and industrial applications Fitted with dra-wing punches and nose bushes for four different blind rivet nuts. Plastic coveredhandles.

Nut Rivet Guns

Teng Tools. Set containing one rivet gun with four nose bushes as well as 80 assortedrivets (20 each of 2.4, 3.2, 4.0 and 4.8 mm).Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Heavy Duty Rivet GunsTeng Tools. For professional use in construction and industrial applica-tions. Two-hand grip gives large riveting capacity. 3 jaws, giving a bettergrip and release of the nail. With collector for the mandrels, 5 nosebushes (for rivet dim. 3.2, 4.0, 4.8, 6.0, 6.4 mm) and plastic coveredhandles.

Heavy Duty Rivetting Tool

Art. no.. . . . . . . . . . . . . . . . 10585 -0101 -0200 -0309Teng Tools . . . . . . . . . . . . . No MT03 MT05 MT08Length. . . . . . . . . . . . . . . . . m 3 5 8Width. . . . . . . . . . . . . . . . . . mm 13 19 25Pack.. . . . . . . . . . . . . . . . . . qty 5 5 1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15149 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HRLN65NMandrel for threads . . . . . . . . . . . . . . . . . . . . M5, M6, M8 M10Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 530Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.8

Mandrel set M5, M6, M8, M10 . . . . . . . . . . . 11315 -0205

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . utg.Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No HRLR01Max. rivet dim. al-rivet . . . . . . . . . . . . . . . . mm 6.4

steel . . . . . . . . . . . . . . . . . . mm 6.4stainless. . . . . . . . . . . . . . . mm 6.4

Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 535Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.7

Nozzle set (5) . . . . . . . . . . . . . . . . . . . . . . . 11308 -0204

Spare part set. . . . . . . . . . . . . . . . . . . . . . . 11308 -0303

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11692 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HN02With nose bushes for blind rivet nuts. . . . . . . . thread M 3, M 4, M 5, M 6Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 250Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.6Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6921 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . No TTHR81With nose bushes. . . . . . . . . . . . . . . . . . . . mm 2.4 3.2 4.0 4.8Quantity rivets. . . . . . . . . . . . . . . . . . . . . . . 80Length of gun . . . . . . . . . . . . . . . . . . . . . . . mm 250Case size LxWxH. . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.95

No 11692

Nr 11691

Nr 15149

No 6921

No 10585

Service Tools

Teng

Too

ls

162


Measuring ToolsMeasuring TapesTeng Tools. Yellow tape. In plastic casing with flat underside for internal measuring. Springreturn tape, with lock and flexible end hook. Belt clip. Scale: metric.Graduated zero point according to alt. IV, see page 0000.Graduation tolerance according to EU precision standard II, see page 0000.

Teng Tools. With round face and hickory shaft.

Carpenters Hammer

Grease Guns

Teng Tools. Round face and with ball. Hickory handle.

Teng Tools. One-handed operation high-pressure gun for loose grease.Supply of the grease to the high-pressure mechanism is carried outautomatically by a spring-loaded low pressure piston. Supplied with pipe and hydraulic coupling.

Ball Pein HammersStriking Tools

Teng Tools. High-pressure gun for 400 gr grease cartridge or regularloose grease. The grease is fed by fully opening the lever. Connectionthread G (R) 1⁄8″.Supplied with pipe and hydraulic coupling.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11699 -0102Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HMCH16Weight without shaft . . . . . . . . . . . . . . . . . . . . . . . oz 16Overall weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . g 720Total length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 330Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6

Spare part set (wooden handle + wedge) . . . 11699 -1001Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HMCH16RK

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 12835 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No AT500Container volume. . . . . . . . . . . . . . . . . . cm3 500

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 12835 -0204Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No AT505Container volume. . . . . . . . . . . . . . . . . . cm3 120

Art. no.. . . . . . . . . . . 13192 -0100 -0209 -0308Teng Tools. . . . . . . . No MT03MM MT05MM MT08MMLength . . . . . . . . . . . m 3 5 8Width . . . . . . . . . . . . mm 13 19 25Pack.. . . . . . . . . . . . . qty 5 5 1

No 10588

No 12835-0105

No 12835-0204

Art. no. . . . . . . . . . . . . . . . . . . . . . . 10588 - -0058 -0108 -0207 -0306Teng Tools . . . . . . . . . . . . . . . . . . . No HMBP08 HMBP12 HMBP16 HMBP24 HMBP32Weight with shaft . . . . . . . . . . . . . . g 320 550 550 1040 1280Head diameter . . . . . . . . . . . . . . . . mm 22 24 27 28 29Pack. . . . . . . . . . . . . . . . . . . . . . . . . qty - 6 6 4 4

Spare part set(wooden handle + wedge) . . . . . 10588 -1007 -1106 -1205 -1304 -1304Teng Tools . . . . . . . . . . . . . . . . . . . No HMBP08RK HMBP12RK HMBP16RK HMBP24RK HMBP32RKPack. . . . . . . . . . . . . . . . . . . . . . . . . set 10 10 10 10 10

No 13192

No 11699

Service Tools

Teng Tools

163


Teng Tools. Combined set containing 9 pieces - 6 parallel pin punches, 2 cold chisels and acentre punch.Supplied in a plastic TC tray with removable cover. Fits in Teng Tools tool boxes and tooltrolleys.

Punch and Chisel Set

Teng Tools. Hammer with one nylon face and one rubber face. Tubular steel shaftwith perforated rubber handle.

Rubber and Soft Face Hammer

Teng Tools. Engineer’s hammer with hickory shaft.

Engineers Hammers

Teng Tools. The the head is filled with fine steel particles to prevent the hammerfrom bouncing back after striking. Black.

Dead Blow Hammers

Striking ToolsCrown Face Body Hammers

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6922 -0101Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No TTPC09Contents:Punches, tip diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 7 8Cold chisels, width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 19 25Centre punch, point diameter . . . . . . . . . . . . . . . . . . . . mm 5Case size LxWxH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 265x142x50Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.4

HMBH01

Art. no. . . . . . . . . . . . . . . . . . . . 11787 -0105 -0204Teng Tools . . . . . . . . . . . . . . . . No HMD35 HMD55Head diameter . . . . . . . . . . . . . mm 35 55Weight . . . . . . . . . . . . . . . . . . . . g 300 980Pack. . . . . . . . . . . . . . . . . . . . . . qty 6 6

Art. no.. . . . . . . . . . . . . 11703 -0106 -0205 -0304Teng Tools. . . . . . . . . . No HMEG300 HMEG500 HMEG800Weight without shaft. . g 300 500 800Overall weight . . . . . . . g 420 650 1000Total length . . . . . . . . . mm 300 320 350Pack.. . . . . . . . . . . . . . . qty 6 6 6

Spare part set (woo-den handle + wedge) 11703 -1005 -1104 -1203Teng Tools. . . . . . . . . . No HMEG300RK HMEG500RK HMEG800RKPack.. . . . . . . . . . . . . . . set 1 1 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10581 -0105Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No HMSFFace diameter . . . . . . . . . . . . . . . . . . . . . mm 22Weight with shaft . . . . . . . . . . . . . . . . . . . g 670Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6

Spare faces (2) . . . . . . . . . . . . . . . . . . . . 10581 -0204Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No HMSFRKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 11

No 6922

No 10581

No 11703

No 11787

HMBH02 HMBH03

Teng Tools. For body work, etc. Hickory handle.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11790 -0100 -0209 -0308Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HMBH01 HMBH02 HMBH03Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Round, flat head

+ pointCrowned head

+ pointDressing hammer

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 325 325 325Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . g 400 350 400Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 6 6 6

Separate wooden handle + handle wedge . . . . . . . 11790 -1009 -1009 -1009Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No HMBHRK HMBHRK HMBHRKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10 10 10

Service Tools

Teng

Too

ls

164


Striking ToolsPunch and Chisel SetTeng Tools. Special steel. Cylindrical. Hardened, with impact-resistant head. With oc-tagonal shank. Supplied in plastic holder.

Separate Striking ToolsTeng Tools. Special steel striking tools. Hardened for long life.

Impact wrenches with 1⁄2″ square drivePower Tools

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6911 -0104Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No PPSO6No. of punches . . . . . . . . . . . . . . . . . . . . . . . ea. 6Nose diameter . . . . . . . . . . . . . . . . . . . . . . . mm 3 4 5 6 7 8Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 150Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 0.5Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set 20

Nr 15157

Art. no. Teng Tools Size Length Product Pack.11702 No mm mm qty-0107 PP03 3 150 Punch 10-0206 PP04 4 150 Punch 10-0305 PP05 5 150 Punch 10-0404 PP06 6 150 Punch 10-0503 PP07 7 150 Punch 10-0602 PP08 8 150 Punch 10

-0909 CC150F 19 150 Flat chisel 10-1006 CC200F 25 200 Flat chisel 10-1105 CC250F 25 250 Flat chisel 10

-1204 CC05 5 150 Centre punch 10

Teng Tools. Cordless reversible 19.2 V / 3.0 Ah 1⁄2″ drive impact wrench. 3.0 Ah Ni-Mh batteries for greater capacity and longerruntime.Supplied in a plastic case including 2 battery packs, one charger and 3 pcs wheel nut sockets.

No 11702

No 6911

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15157 -0108Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No PRIWVoltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.2 V / 3.0 AhSpeed onloded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . r/min 0-2000Square drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄2Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nm / In-lb 300 / 2655Wheel nut sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 17 19 21Weight of machine incl. battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 2.845Case size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 584x310x110Wedight of case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 7.97

Extra batteri pack. 3.0 Ah Bl-Mh. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15157 -1007Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nr PRIW-BAT

Service Tools

Teng Tools

165


Power ToolsImpact wrenches with 1⁄2″ square driveTeng Tools. Set containging an impact wrench with 1⁄2″ squaredrive. Incl. fast charger and a spare 19.2 V battery..Supplied in PS tool tray to fit in Teng Tools tool boxes and rollercabinets.

Drilling machine

art. no. . . . . . . . . . . . . . . . . . . . . . . . 15172 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . No TTPSIWSquare drive. . . . . . . . . . . . . . . . . . . inch 1⁄2Battery voltage / capacity . . . . . . . . 19.2 V / 3.0 AhNo load speed . . . . . . . . . . . . . . . . . rpm 0-2000Max. torque . . . . . . . . . . . . . . . . . . . Nm /In-lb 300 / 2655Size of case . . . . . . . . . . . . . . . . . . . mm 580x274x95Weight of case . . . . . . . . . . . . . . . . . kg 5.15Pack. . . . . . . . . . . . . . . . . . . . . . . . . . sts 2

Extra batteri pack. 3-0 Ah Bl-Mh 15157 -1007Teng Tools . . . . . . . . . . . . . . . . . . . . Nr PRIW-BAT

Nr 15155

Teng Tools. Cordless reversible 14.4 V drill and power driver with keyless chuck. Dual speed ranage 0-400/0-1400 rpm deliveroptimal performance. 3.0 Ah Ni-Mh batteries for greater capacaity and longer runtime.Supplied in a plastic case oncluding 2 battery packs, one charger and 34 drill bits 1.0-13.0 mm.

Nr 15172

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15155 -0100Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No PRDDVoltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4 V / 3.0 AhSpeed unloaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . r/min 0-350 / 0-1000Chuck capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 13.0Torque high/low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nm/ln-lb 8.2-12.8 / 72.5-113Drill bits incl. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 1.0x4 1.5x3 2.0x2

2.5-13.0 (0.5 mm intervall)3.3 4.2 6.8

Machine weight incl. battery . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.64Case size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 584x310x110Weight of case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 6.78

Extra batteri pack. 3.0 Ah Li-ion . . . . . . . . . . . . . . . . . . . . . . 15155 -1009Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nr PRDS-BAT

Service Tools

Teng

Too

ls

166


Power ToolsScrewdriver

Drilling machine/screwdriver setTeng Tools. Set containing a cordless drilling machine and acordless power driver incl. quick charger and an extra battery14.4 V.Supplied in special plastic box which fits in Teng Tools toolboxes and tool trolleys.

Nr 15156

Art. no.. . . . . . . . . . . . . . . . . . . . . . . 15171 -0100Teng Tools. . . . . . . . . . . . . . . . . . . . NoNo master TTPSDSDrilling machine:Battery voltage/capacity . . . . . . . . 14.4 V/3.0 AhSpeed unloaded . . . . . . . . . . . . . . . rpm H 0-1000/ L 0-350Max. torque . . . . . . . . . . . . . . . . . . . Nm / ln-lb 8.2-12.8 / 72.5-113Chuck capacity . . . . . . . . . . . . . . . . mm 13.0Power driver:Battery voltage/capacity . . . . . . . . 14.4 V/3.0 AhSpeed unloaded . . . . . . . . . . . . . . . rpm 0-2400Max. torque . . . . . . . . . . . . . . . . . . . Nm / ln-lb 120 / 1062Bit attachment . . . . . . . . . . . . . . . . . inch 1⁄4gInsert size . . . . . . . . . . . . . . . . . . . . mm 580x274x95Box weight . . . . . . . . . . . . . . . . . . . . kg 5.77Pack.. . . . . . . . . . . . . . . . . . . . . . . . . sts 2

Extra batteri pack. 3.0 Ah Li-ion 15155 -1009Teng Tools. . . . . . . . . . . . . . . . . . . . Nr PRDS-BAT

Teng Tools. Cordless, reversible compact 14.4 V screwdriver with 1/4″ hex quick release holder for bits, 3.0 Ah Ni-Mh batteriesfor greater capacity and longer runtime. Supplied i a plastic case including 2 battery packs, one charger and 22 screwdriver bits.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15156 -0109Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No PRISVoltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4 V / 3.0 AhSpeed unloaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . r/min 0-2400Quick chuck for bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inch 1⁄4″gTorque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nm / In -lb 120 / 1062Bits TX-type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TX- 8, 10,15, 20, 25, 27, 30Bits flat type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 0.6x3.5 0.8x4.0 0.8x5.5

1.0x5.5 1.2x6.5Bits PH-type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nr 1 2 3Bits PZ-type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nr 1 2 3Bits Hex-type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 4 5 6 8Weight of machine incl. battery . . . . . . . . . . . . . . . . . . . . . . . . . kg 1.68Case size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm 584x310x110Weight of case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg 6.0

Extra batteri pack. 3.0 Ah Li-ion. . . . . . . . . . . . . . . . . . . . . . . 15155 -1009Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nr PRDS-BAT

No 15171

Teng Collection

Teng Tools

167


T-shirts

Teng Tools. Specially designed T-shirt. Red, black and grey. 95% cotton, 5% elastane.

Teng Tools. Shirts red or black. 100% cotton.

Lady’s Tops

Shirts

Teng Tools. Specially designed woman’s top. Red, black and grey. 95% cotton, 5%elastane.

Polo Shirts

Teng Tools. Teng Tools T-shirt. 100% cotton.

Teng Tools. Specially designed piqué shirt. Red, black and grey. 100% cotton.

T-shirts

Teng Tools. Black piqué shirt. 100% polyester.

Teng Tools. Red cap with Teng-face.

Cap

Art. no. . . . . 3651 (-5021) (-5047) (-5062) (-5088)Teng Tools . No COL-OSRS COL-OSRM COL-OSRL COL-OSRXLColour . . . . . red red red redSize . . . . . . . small medium large extra large

Art. no. . . . . 3651 (-5120) (-5146) (-5161) (-5187)Teng Tools . No COL-OSBS COL-OSBM COL-OSBL COL-OSBXLColour . . . . . black black black blackSize . . . . . . . small medium large extra large

Art. no. . . . . . 3651 -4206 -4222 -4248 -4263Teng Tools . . No COL-TRS COL-TRM COL-TRL COL-TRXLColour. . . . . . . red red red redSize. . . . . . . . . small medium large extra large

Art. no. . . . . . 3651 -4305 -4321 -4347 -4362Teng Tools . . No COL-TBS COL-TBM COL-TBL COL-TBXLColour. . . . . . . black black black blackSize. . . . . . . . . small medium large extra large

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -0105Teng Tools. . . . . . . . . . . . . . . . . . . . . . . . No P-CAP5Pack.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 24

Art. no. . . . . . . . 3651 (-4008) (-4024) (-4040) (-4065)Teng Tools . . . . No COL-PBS COL-PBM COL-PBL COL-PBXLSize . . . . . . . . . . small medium large extra large

Art. no.. . . . . . 3651 -4800 -4826 -4842 -4867Teng Tools. . . No COL-SPM COL-SPL COL-SPXL COL-SPXXLSize. . . . . . . . . medium large extra large extra extra large

Art. no. . . . . . . 3651 -4909 -4925 -4941 -4966Teng Tools. . . . No COL-SWS COL-SWM COL-SWL COL-SWXLSize. . . . . . . . . . small medium large extra large

Art. no. . . . . . . 3651 -4701 -4719 -4735 -4750Teng Tools . . . No COL-STM COL-STL COL-STXL COL-STXXLSize . . . . . . . . . medium large extra large extra extra large

Teng Collection

Teng

Too

ls

168


Teng Tools. Causal jacket for both women and men. Outer fabric: 100% nylon.Lining: 100% polyester.

Jackets

Teng Tools. Fleece jumper for both women and men. Black. 100% microfleece.

Fleece Jackets

Teng Tools. Red boiler suit with 13 pockets. 65% polyester, 35% cotton.

Workman’s Overalls

Teng Tools. Working trousers with 11 different pockets. 35% polyester, 35% cotton.

Work Trousers

Teng Tools. Working jacket. 65% polyester, 35% cotton.

Work Coats

Art. no. . . . . . . . 3651 (-3901) (-3919) (-3927)Teng Tools . . . . No COL-WTBC46 COL-WTBC48 COL-WTBC50Colour . . . . . . . . black black blackSize . . . . . . . . . . C46 C48 C50

Art. no. . . . . . . . 3651 (-3935) (-3943) (-3950)Teng Tools . . . . No COL-WTBC52 COL-WTBC54 COL-WTBC56Colour . . . . . . . . black black blackSize . . . . . . . . . . C52 C54 C56

Art. no. . . . . . . . 3651 (-3968) (-3976)Teng Tools . . . . No COL-WTBC58 COL-WTBC60Colour . . . . . . . . black blackSize . . . . . . . . . . C58 C60

Art. no. . . . . 3651 (-3703) (-3729) (-3745) (-3760)Teng Tools . No COL-WCRS COL-WCRM COL-WCRL COL-WCRXLFärg. . . . . . . red red red redSize . . . . . . . small medium large extra large

Art. no. . . . . 3651 (-3802) (-3828) (-3844) (-3869)Teng Tools . No COL-WCBS COL-WCBM COL-WCBL COL-WCBXLFärg. . . . . . . black black black blackSize . . . . . . . small medium large extra large

Art. no. . . . . . . 3651 (-3604) (-3612) (-3620)Teng Tools . . . No COL-WORC48 COL-WORC50 COL-WORC52Size . . . . . . . . . C48 C50 C52

Art. no. . . . . . . 3651 (-3638) (-3646) (-3653)Teng Tools . . . No COL-WORC54 COL-WORC56 COL-WORC58Size . . . . . . . . . C54 C56 C58

Art. no. . . . . . . 3651 (-3661)Teng Tools . . . No COL-WORC60Size . . . . . . . . . C60

Art. no. . . . . . . 3651 (-4602) (-4628) (-4644) (-4669)Teng Tools . . . No COL-FLBS COL-FLBM COL-FLBL COL-FLBXLColour . . . . . . . black black black blackSize . . . . . . . . . small medium large extra large

Art. no.. . . . . . 3651 (-4404) (-4420) (-4446) (-4461)Teng Tools. . . No COL-JRS COL-JRM COL-JRL COL-JRXLColour . . . . . . . red red red redSize. . . . . . . . . small medium large extra large

Art. no.. . . . . . 3651 (-4503) (-4529) (-4545) (-4560)Teng Tools. . . No COL-JBS COL-JBM COL-JBL COL-JBXLColour . . . . . . . black black black blackSize. . . . . . . . . small medium large extra large

Teng Collection

Teng Tools

169


Bodywarmers

Black unisex quilted vest. Outer fabric: 100% nylon. Lining: 100% polyester.

Teng Tools. Flag with the Teng Tools Logo.

Travel Bags

Flag

Teng Tools. Plastic disc with Teng Tools Logo. Space at the back for your name andaddress. Equipped with plastic strap to secure to baggage.

Teng Tools. Red travelling bag with black trim and Teng-face.

Luggage tag

Back Packs

Teng Tools. Red back pack with black trim and Teng-face.Type P-SB. Sport back pack for water. Holds 1 litre. With mobile telephone holder.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -7100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No P-TF01Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cm 180x300For flagpole length. . . . . . . . . . . . . . . . . . . . . . . . . . m 11-12

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -7407Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No P-LT

Art. no. . . . . . . . . . . 3651 -1103 -1152Teng Tools . . . . . . . No P-BP P-SBSize. . . . . . . . . . . . . . mm 360x200x490 200x400x50

Art. no. . . . . . . . . . . . . . . . . . . . . . 3651 -1202Teng Tools . . . . . . . . . . . . . . . . . . No P-BMSize . . . . . . . . . . . . . . . . . . . . . . . . mm 430x255x290

Art. no. . . . . . . . . . . . . . . . . . . . . . 3651 -1301Teng Tools . . . . . . . . . . . . . . . . . . No P-BLSize . . . . . . . . . . . . . . . . . . . . . . . . mm 555x275x335

Art. no. . . . . . . . . 3651 (-6102) (-6110) (-6128)Teng Tools . . . . . No COL-BWXS COL-BWS COL-BWMSize . . . . . . . . . . . XS S M

Art. no. . . . . . . . . 3651 (-6136) (-6144) (-6151)Teng Tools . . . . . No COL-BWL COL-BWXL COL-BWXXLSize . . . . . . . . . . . L XL XXL

Luggage tag

P-BP

P-BM

P-BL

P-SB

Teng Collection

Teng

Too

ls

170


Teng Tools. Round Teng Tools badge.

Round badge

Teng Tools. Rectangular Teng Tools badge.

Rectangular badge

Teng Tools. 6 Teng Tools glass underlays.

Cooster Set

Teng Tools. Stainless corkscrew with knife in holder.

Cork Screw

Teng Tools. Coloured stickers.

Stickers

Teng Tools. Stand with Teng flag.

Flag with stand

Art. no. . . . . . 3651 -3109 -3208 -3307 -3406 -3505Teng Tools . . No ST-R130 ST-R200 ST-R400 ST-R130BK ST-R400BKSize . . . . . . . . mm 130 200 400 200 400Type . . . . . . . mm colour colour colour black black

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -1004Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No P-CS

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . utg.Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No P-COS1No. per . . . . . . . . . . . . . . . . . . . . . . . . . . pack. 6

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -7209Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . No P-TF02

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -6409Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No P-PIN01Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 10

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -6508Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . No P-PIN

Teng Collection

Teng Tools

171


Sugar free candiesSugar free candies in metal box with Teng Tools logo.

Teng Tools. Ink pens with company logo.

Coffee / Tea CupTeng Tools. Coffee/tea mug with illustration of Teng Mini Cooper.

Teng Tools. Pen with Teng Tools logo.

Pens

Teng Tools. Profilerad kaffe/the mugg med bildmotiv.

Art. no. . . . . . . . . . . . . . . 13251 -0108Teng Tools . . . . . . . . . . . No TPENLogo. . . . . . . . . . . . . . . . . ToolstarsPack. . . . . . . . . . . . . . . . . qty 10*

Art. no. . . . . . . . . . . . . . . 13251 -0207Teng Tools . . . . . . . . . . . No LPENLogo. . . . . . . . . . . . . . . . . LimitPack. . . . . . . . . . . . . . . . . qty 10*

Art. no. . . . . . . . . . . . . . . 13251 -0306Teng Tools . . . . . . . . . . . No RPENLogo. . . . . . . . . . . . . . . . . RacePack. . . . . . . . . . . . . . . . . qty 10*

Art. no. . . . . . . . . . . . . . . 13251 -0405Teng Tools . . . . . . . . . . . No TTPENLogo. . . . . . . . . . . . . . . . . Teng ToolsPack. . . . . . . . . . . . . . . . . qty 10*

Art. no. . . . . . . . . . . . . . . 13251 -0504Teng Tools . . . . . . . . . . . No TLRPEN-SetLogo. . . . . . . . . . . . . . . . . Teng Tools/Limit/RacePack. . . . . . . . . . . . . . . . . qty 5

*) Only unopened pack.

Art no. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15163 -0100Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No TTPEN

Artnr . . . . . . . . . . . . . . . . . . . . . . . . . . . 13251 -0702Teng Tools . . . . . . . . . . . . . . . . . . . . . . Nr P-CUP2

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -1806Teng Tools . . . . . . . . . . . . . . . . . . . . . . . No P-CUP1

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3651 -1657Teng Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . No CLIKPack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . qty 24

Profilerad kaffe/the mugg

Set of pens

Teng Collection

Teng

Too

ls

172


Pallet cover

Teng Tools. Pallet cover with Teng Tools logo for 4 pallets in a stack. To use whendisplaying tools in exhibitions and shops.

Radio / CD-player

Mini Cooper shaped Radio, CD and MP3 player. Stereo speakers in the wheels. FeaturingUSB port, headpone jack and audio output jack in the trunk and control panel under thehood. CD tray in the front bunper. AC/DC adaptor included.

Digital photoframeTeng Tools. 10.2″ digital photo frame with TFT active LCD display. Allows you to wiew andlisten to photos, movies and MP3 music. Card reader and USB port. Calender and clock /alarm clock. Remote control.

Art. no. . . . . . . . . . . . . . . . . . . . . . 4747 -0505Size LxWxH . . . . . . . . . . . . . . . . . mm 1220x820x540

Art no. . . . . . . . . . . . . . . . . . . . . . . . 3651 -7308Teng Tools . . . . . . . . . . . . . . . . . . . No Mini Cooper

Art. no.. . . . . . . . . . . . . . . . . . 18414 -0291Resolution . . . . . . . . . . . . . . . pixels 800x480Display ratio. . . . . . . . . . . . . . 16:9 och 4:3Cards susupported. . . . . . . . XD/SD/MMC/MS/CFFiles supported . . . . . . . . . . . JPEG, MP3, MPEG-4, DIVX, WAStorlek . . . . . . . . . . . . . . . . . . mm 322x245x38Weight . . . . . . . . . . . . . . . . . . kg 1.3

Radio / CD player

No 4747

Tool sets - FORTE spol. s r.o

Documents

Transcript of Tool sets - FORTE spol. s r.o