Tool holder accessories -...
Transcript of Tool holder accessories -...
LY1002.10341 - 08.02.20130213/Rö
Tool holder accessories
Collets
Reductions & mountings
Quick-change inserts
Tool holders with parallel shank
Cutting tools
Presetting units
Polygon turning
Other accessories
LY1002.10341 - 08.02.20130213/Rö
Tool holder accessories
Collets
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2013
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2013
Catalog page
Collets
901930.8--- 13Collets ER8UPConcentricity tolerance according to DIN 6499
901930.0--- 14Collets ER11Concentricity tolerance according to DIN 6499
W99903-- 15Collets ER16UPConcentricity tolerance according to DIN 6499, form A (≤0.005 mm)
901930.1--- 16Collets ER16Concentricity tolerance according to DIN 6499, form A (≤0.01 mm)
901930.2--- 17Collets ER20Concentricity tolerance according to DIN 6499
901930.3--- 18Collets ER25Concentricity tolerance according to DIN 6499
901930.6--- 19Collets ER32Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets3
Catalog page
Collets
901930.4--- 20Collets ER40Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets4
Catalog page
Tapping collets
900288 21Tapping collets ER11GB
3239-- 22Tapping collets ET-1-12
WZ9990.9506F 23Tapping collets ER16GB
3230-- 24Tapping collets ET-1-16
3234-- 25Tapping collets ET-1-20
WZ9990.9507F 26Tapping collets ER25GB
3224-- 27Tapping collets ET-1-25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets5
Catalog pageWZ9990.9509F 28Tapping collets ER32GB
3242-- 29Tapping collets ET-1-32
Tapping collets
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets6
Catalog page
Collet chucks
W999064- 30Collet chuck ER11
W999065- 31Collet chuck ER16
W999066- 32Collet chuck ER20
W999067- 33Collet chuck ER25
W999068- 34Collet chuck ER32
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets7
Catalog pageAZ4005.02 35Internal cooling lubricant supply
901939.0--- 36Clamping nutfor external cooling lubricant supply with internal thread
901939.0--- 37Clamping nutfor external cooling lubricant supply with internal thread
901939.3--- 38Clamping nutFor internal cooling lubricant supply with internal thread
901939.3--- 39Clamping nutFor internal cooling lubricant supply with internal thread
901939.2--- 40Clamping nutwith minimal external dimensions
W999034- 41Clamping nutwith minimal external dimensions
Clamping nuts
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets8
Catalog pageW9990480 42Clamping nutER8 for high-frequency spindles with internal thread
901939.5--- 43Clamping nutFor external cooling lubricant supply with external thread
901939.5--0 44Clamping nutFor internal cooling lubricant supply with external thread
Clamping nuts
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets9
Catalog page
Sealing disks
W999036- 45Sealing disks, type ER16for internal cooling lubricant supply
W999038- 46Sealing disks, type ER20for internal cooling lubricant supply
W99904-- 47Sealing disks, type ER25for internal cooling lubricant supply
W99906-- 48Sealing Disks, Type ER32for internal cooling lubricant supply
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets10
Catalog page
Chuck key
490219.0--1 49Chuck keyfor clamping nuts Hi-Q/ER or Hi-Q/ERC
490219.0--1 50Chuck keyfor clamping nuts Hi-Q/ER or Hi-Q/ERC
490219.2--1 51Chuck keyfor clamping nuts Hi-Q/ERM or Hi-Q/ERMC
W9990495 52Chuck keyfor clamping nuts ER8-MS
490219.3--1 53Chuck keyfor clamping nuts Hi-Q/ERAX or Hi-Q/ERAXC
203020.1--- 54Mill arbor wrench
490340.---- 55Hook wrench
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets11
Catalog page
Chuck key
490344.1--- 56Hook Wrench
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets12
13,6
ø8,5 D
16°
901930.8---
ER8UPPart number
Clamping rangeD
901930.8000 ø0.5-ø5.0 Collet set, 9 pieces with storage case
325806 ø0.5-ø1.0
325807 ø1.0-ø1.5
325808 ø1.5-ø2.0
325809 ø2.0-ø2.5
325810 ø2.5-ø3.0
325811 ø3.0-ø3.5
325812 ø3.5-ø4.0
325813 ø4.0-ø4.5
325814 ø4.5-ø5.0
Collets ER8UP
Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets13
DD1
L
16°
901930.0---
ER11Part number
Clamping rangeD D1 L
901930.0000 ø0.5-ø7.0Collet set13 pieces
with storage case
901930.0010 ø0.5-ø1.0 ø11.5 18
901930.0015 ø1.0-ø1.5 ø11.5 18
901930.0020 ø1.5-ø2.0 ø11.5 18
901930.0025 ø2.0-ø2.5 ø11.5 18
901930.0030 ø2.5-ø3.0 ø11.5 18
901930.0035 ø3.0-ø3.5 ø11.5 18
901930.0040 ø3.5-ø4.0 ø11.5 18
901930.0045 ø4.0-ø4.5 ø11.5 18
901930.0050 ø4.5-ø5.0 ø11.5 18
901930.0055 ø5.0-ø5.5 ø11.5 18
901930.0060 ø5.5-ø6.0 ø11.5 18
901930.0065 ø6.0-ø6.5 ø11.5 18
901930.0070 ø6.5-ø7.0 ø11.5 18
Collets ER11
Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets14
L
D1 D 16°
Collets ER16UP
Concentricity tolerance according to DIN 6499, form A (≤0.005 mm)
W99903--
ER16Part number
Clamping rangeD D1 L
W9990329 ø0.5-ø10.0Collet set10 pieces
with storage case
W9990330 ø0.5-ø1.0 ø17 27
W9990331 ø1.0-ø2.0 ø17 27
W9990332 ø2.0-ø3.0 ø17 27
W9990333 ø3.0-ø4.0 ø17 27
W9990334 ø4.0-ø5.0 ø17 27
W9990335 ø5.0-ø6.0 ø17 27
W9990336 ø6.0-ø7.0 ø17 27
W9990337 ø7.0-ø8.0 ø17 27
W9990338 ø8.0-ø9.0 ø17 27
W9990339 ø9.0-ø10.0 ø17 27
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets15
L
D1 D 16°
Collets ER16
Concentricity tolerance according to DIN 6499, form A (≤0.01 mm)
901930.1---
ER16Part number
Clamping rangeD D1 L
901930.1000 ø0.5-ø10.0Collet set10 pieces
with storage case
901930.1010 ø0.5-ø1.0 ø17 27
901930.1020 ø1.0-ø2.0 ø17 27
901930.1030 ø2.0-ø3.0 ø17 27
901930.1040 ø3.0-ø4.0 ø17 27
901930.1050 ø4.0-ø5.0 ø17 27
901930.1060 ø5.0-ø6.0 ø17 27
901930.1070 ø6.0-ø7.0 ø17 27
901930.1080 ø7.0-ø8.0 ø17 27
901930.1090 ø8.0-ø9.0 ø17 27
901930.1100 ø9.0-ø10.0 ø17 27
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets16
31,5
D1 D 16°
901930.2---
ER20Part number
Clamping rangeD D1 L
901930.2000 ø1-ø13.0Collet set12 pieces
with storage case
901930.2020 ø1.0-ø2.0 ø21 31
901930.2030 ø2.0-ø3.0 ø21 31
901930.2040 ø3.0-ø4.0 ø21 31
901930.2050 ø4.0-ø5.0 ø21 31
901930.2060 ø5.0-ø6.0 ø21 31
901930.2070 ø6.0-ø7.0 ø21 31
901930.2080 ø7.0-ø8.0 ø21 31
901930.2090 ø8.0-ø9.0 ø21 31
901930.2100 ø9.0-ø10.0 ø21 31
901930.2110 ø10.0-ø11.0 ø21 31
901930.2120 ø11.0-ø12.0 ø21 31
901930.2130 ø12.0-ø13.0 ø21 31
Collets ER20
Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets17
DD1
34
16°
901930.3---
ER25Part number
Clamping rangeD D1 L
901930.3000 ø1-ø16.0Collet set15 pieces
with storage case
901930.3020 ø1.0-ø2.0 ø26 35
901930.3030 ø2.0-ø3.0 ø26 35
901930.3040 ø3.0-ø4.0 ø26 35
901930.3050 ø4.0-ø5.0 ø26 35
901930.3060 ø5.0-ø6.0 ø26 35
901930.3070 ø6.0-ø7.0 ø26 35
901930.3080 ø7.0-ø8.0 ø26 35
901930.3090 ø8.0-ø9.0 ø26 35
901930.3100 ø9.0-ø10.0 ø26 35
901930.3110 ø10.0-ø11.0 ø26 35
901930.3120 ø11.0-ø12.0 ø26 35
901930.3130 ø12.0-ø13.0 ø26 35
901930.3140 ø13.0-ø14.0 ø26 35
901930.3150 ø14.0-ø15.0 ø26 35
901930.3160 ø15.0-ø16.0 ø26 35
Collets ER25
Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets18
D1
D
40
16°
901930.6---
ER32Part number
Clamping rangeD D1 L
901930.6000 ø2-ø20.0Collet set18 pieces
with storage case
901930.6030 ø2.0-ø3.0 ø33 40
901930.6040 ø3.0-ø4.0 ø33 40
901930.6050 ø4.0-ø5.0 ø33 40
901930.6060 ø5.0-ø6.0 ø33 40
901930.6070 ø6.0-ø7.0 ø33 40
901930.6080 ø7.0-ø8.0 ø33 40
901930.6090 ø8.0-ø9.0 ø33 40
901930.6100 ø9.0-ø10.0 ø33 40
901930.6110 ø10.0-ø11.0 ø33 40
901930.6120 ø11.0-ø12.0 ø33 40
901930.6130 ø12.0-ø13.0 ø33 40
901930.6140 ø13.0-ø14.0 ø33 40
901930.6150 ø14.0-ø15.0 ø33 40
901930.6160 ø15.0-ø16.0 ø33 40
901930.6170 ø16.0-ø17.0 ø33 40
901930.6180 ø17.0-ø18.0 ø33 40
901930.6190 ø18.0-ø19.0 ø33 40
901930.6200 ø19.0-ø20.0 ø33 40
Collets ER32
Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets19
901930.4---
ER40Part number
Clamping range
DD1 L
901930.4000 ø3-ø26.0
Collet set, 23 pieces with mounting
case
901930.4040 ø3.0-ø4.0 ø41 46
901930.4050 ø4.0-ø5.0 ø41 46
901930.4060 ø5.0-ø6.0 ø41 46
901930.4070 ø6.0-ø7.0 ø41 46
901930.4080 ø7.0-ø8.0 ø41 46
901930.4090 ø8.0-ø9.0 ø41 46
901930.4100 ø9.0-ø10.0 ø41 46
901930.4110 ø10.0-ø11.0 ø41 46
901930.4120 ø11.0-ø12.0 ø41 46
ER40Part number
Clamping range
DD1 L
901930.4130 ø12.0-ø13.0 ø41 46
901930.4140 ø13.0-ø14.0 ø41 46
901930.4150 ø14.0-ø15.0 ø41 46
901930.4160 ø15.0-ø16.0 ø41 46
901930.4170 ø16.0-ø17.0 ø41 46
901930.4180 ø17.0-ø18.0 ø41 46
901930.4190 ø18.0-ø19.0 ø41 46
901930.4200 ø19.0-ø20.0 ø41 46
901930.4210 ø20.0-ø41.0 ø41 46
901930.4220 ø41.0-ø22.0 ø41 46
901930.4230 ø22.0-ø23.0 ø41 46
901930.4240 ø23.0-ø24.0 ø41 46
901930.4250 ø24.0-ø25.0 ø41 46
901930.4260 ø25.0-ø26.0 ø41 46
D1
D
46
16°
Collets ER40
Concentricity tolerance according to DIN 6499
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets20
d
s
Tapping collets ER11GB
900288
Part number d s
326889 ø2.8 2.1
326890 ø3.5 2.7
326891 ø4.0 3.0
326892 ø4.5 3.4
326893 ø6.0 4.9
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets21
d
21,5
max.5,5
18
ø11,
4
M2
Tapping collets ET-1-12
3239--
Part number Tapping collets d
323959 ET-1-12140 ø1.4
323960 ET-1-12160 ø1.6
323961 ET-1-12180 ø1.8
323962 ET-1-12220 ø2.2
323963 ET-1-12250 ø2.5
323964 ET-1-12280 ø2.8
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets22
Tapping collets ER16GB
WZ9990.9506F
Part Number d s
W9990589 ø4,5 3.4
W9990597 ø6,0 4.9
W9990598 ø8,0 6.3
d
s
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets23
d
27
max.7
22
ø17
M4
Tapping collets ET-1-16
3230--
Part number Tapping collets d
323005 ET-1-16140 ø1.4
323006 ET-1-16160 ø1.6
323007 ET-1-16180 ø1.8
323008 ET-1-16224 ø2.24
323009 ET-1-16250 ø2.5
323010 ET-1-16280 ø2.8
323011 ET-1-16350 ø3.5
323012 ET-1-16400 ø4.0
323013 ET-1-16450 ø4.5
323014 ET-1-16500 ø5.0
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets24
Part number Tapping collets d
323441 ET-1-20280 ø2.8
323442 ET-1-20315 ø3.15
323443 ET-1-20355 ø3.55
323444 ET-1-20400 ø4.0
323445 ET-1-20450 ø4.5
323446 ET-1-20500 ø5.0
323447 ET-1-20560 ø5.6
323448 ET-1-20600 ø6.0
323449 ET-1-20630 ø6.3
ø14
ø21
8 23
24
7
d
2,8 2x M4
Tapping collets ET-1-20
3234--
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets25
Tapping collets ER25GB
WZ9990.9507F
Part Number d s
W9990599 ø6,0 4.9
W9990635 ø8,0 6.3
W9990636 ø10,0 8.0
d
s
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets26
ø19
ø26
10 24
26
8
d
3 2x M5
Tapping collets ET-1-25
3224--
Part number Tapping collets d
322459 ET-1-25400 ø4.0
322460 ET-1-25450 ø4.5
322461 ET-1-25500 ø5.0
322462 ET-1-25560 ø5.6
322463 ET-1-25600 ø6.0
322464 ET-1-25630 ø6.3
322465 ET-1-25700 ø7.0
322458 ET-1-25800 ø8.0
322466 ET-1-25900 ø9.0
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets27
Tapping collets ER32GB
WZ9990.9509F
Part Number d s
W9990637 ø7,0 5.5
W9990638 ø12,0 9.0
W9990639 ø16,0 12.0
d
s
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets28
Tapping collets ET-1-32
3242--
Part number Tapping collets d
324252 ET-1-32450 ø4.5
324253 ET-1-32500 ø5.0
324254 ET-1-32560 ø5.6
324255 ET-1-32600 ø6.0
324256 ET-1-32630 ø6.3
324257 ET-1-32700 ø7.0
324258 ET-1-32800 ø8.0
324259 ET-1-32900 ø9.0
324260 ET-1-32100 ø10.0
324261 ET-1-32110 ø11.0
324262 ET-1-32120 ø12.0
24
33
10
d
3
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets29
Collet chuck ER11
W999064-
ø11
19
D
Part Number D
W9990660 ø3
W9990661 ø4
W9990662 ø5
W9990663 ø6
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets30
Collet chuck ER16
W999065-
Part Number D
W9990664 ø3
W9990665 ø4
W9990666 ø5
W9990667 ø6
W9990668 ø8
W9990669 ø10
28,5
D ø16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets31
Collet chuck ER20
W999066-
Part Number D
W9990670 ø3
W9990671 ø4
W9990672 ø5
W9990673 ø6
W9990674 ø8
W9990675 ø10
33,5
D ø20
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets32
Collet chuck ER25
W999067-
Part Number D
W9990676 ø3
W9990677 ø4
W9990678 ø5
W9990679 ø6
W9990680 ø8
W9990681 ø10
W9990682 ø12
W9990683 ø13
W9990684 ø14
W9990685 ø15
W9990686 ø16
37
D
ø25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets33
Collet chuck ER32
W999068-
Part Number D
W9990687 ø6
W9990688 ø8
W9990689 ø10
W9990690 ø12
W9990691 ø13
W9990692 ø14
W9990693 ø15
W9990694 ø16
W9990695 ø18
W9990696 ø20
43
D
ø32
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets34
2
1
Internal cooling lubricant supply
AZ4005.02
1 Clamping nut Hi-Q/ERAXC, Hi-Q/ERC or HiQ/ERMC2 Sealing disk
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets35
901939.0---
Part number Type A B C Collets
322438 Hi-Q/ER11 ø19 11.3 M14x0.75 ER11
901939.01 Hi-Q/ER16 ø28 17.5 M22x1.5 ER16
901939.0201 Hi-Q/ER20 ø34 19 M25x1.5 ER20
CB
A
Clamping nutType Hi-Q/ERfor external cooling lubricant supply with internal thread
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets36
C
A B
901939.0---
Part number Type A B C Collets
901939.0251 Hi-Q/ER25 ø42 20 M32x1.5 ER25
901939.0321 Hi-Q/ER32 ø50 22.5 M40x1.5 ER32
901939.0401 Hi-Q/ER40 ø63 25.5 M50x1.5 ER40
Clamping nutType Hi-Q/ERfor external cooling lubricant supply with internal thread
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets37
Clamping nutType Hi-Q/ERCFor internal cooling lubricant supply with internal thread
901939.3---
Part number Type D B C Lmax
901939.3161 Hi-Q/ERC 16 ø28 22.5 M22x1.5 15.5
901939.3201 Hi-Q/ERC 20 ø34 24 M25x1.5 16.5
C
L
B
D
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets38
L
B
CD
Clamping nutType Hi-Q/ERCFor internal cooling lubricant supply with internal thread
901939.3---
Part number Type D B C Lmax
901939.3251 Hi-Q/ERC 25 ø42 25 M32x1.5 17
901939.3321 Hi-Q/ERC 32 ø50 27.5 M40x1.5 18
901939.3401 Hi-Q/ERC 40 ø63 30.5 M50x1.5 20
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets39
Clamping nutType Hi-Q/ERMwith minimal external dimensions
901939.2---
Part number Type A B C Collets
323117 Hi-Q/ERM8 ø12 10.8 M10x0.75 ER8
326681 Hi-Q/ERM11 ø16 12 M13x0.75 ER11
901939.6161 Hi-Q/ERM16 ø22 18.4 M19x1 ER16
901939.2201 Hi-Q/ERM20 ø28 19 M24x1 ER20
901939.2251 Hi-Q/ERM25 ø35 20 M30x1 ER25
C
A B
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets40
Clamping nutType Hi-Q/ERMCwith minimal external dimensionsFor internal cooling lubricant supply with internal thread
W999034-
Part number Type A B C Collets
W9990347 Hi-Q/ERMC 16 ø22 22 M19x1 ER16
W9990348 Hi-Q/ERMC 20 ø28 24 M24x1 ER20
901939.4251 Hi-Q/ERMC 25 ø35 25 M30x1 ER25
C
A B
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets41
Clamping nut
ER8 for high-frequency spindles with internal thread
W9990480
10,8
M10
x0,7
5
ø12
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets42
B
D
901939.5---
Part number Type D B Cooling
901939.5111 Hi-Q/ERAX 11 M18x1.0 7.5 External
901939.5161 Hi-Q/ERAX 16 M24x1.0 7.6 External
901939.5201 Hi-Q/ERAX 20 M28x1.5 8.5 External
901939.5251 Hi-Q/ERAX 25 M32x1.5 8.8 External
325950 Hi-Q/ERAX 32 M40x1.5 9.8 External
Clamping nutType Hi-Q/ERAXFor external cooling lubricant supply with external thread
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets43
B
D
901939.5--0
When using with internal cooling lubricant supply, the clamping nut for internal cool-ing (see table) is to be used.
Part number Type D B Cooling
326691 Hi-Q/ERAXC 16 M24x1.0 12.5 Internal
326674 Hi-Q/ERAXC 20 M28x1.5 13.5 Internal
326018 Hi-Q/ERAXC 25 M32x1.5 13.8 Internal
326693 Hi-Q/ERAXC 32 M40x1.5 14.9 Internal
326694 Hi-Q/ERAXC 40 M50x1.5 16.6 Internal
Clamping nutType Hi/Q/ERAXCFor internal cooling lubricant supply with external thread
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets44
4
A
Sealing disks, type ER16
for internal cooling lubricant supply
W999036-
Part number Type ER16Sealing range
W9990364 ER16 / A=ø13 3.0-2.5
W9990365 ER16 / A=ø13 3.5-3.0
W9990366 ER16 / A=ø13 4.0-3.5
W9990367 ER16 / A=ø13 4.5-4.0
W9990368 ER16 / A=ø13 5.0-4.5
W9990369 ER16 / A=ø13 5.5-5.0
W9990370 ER16 / A=ø13 6.0-5.5
W9990371 ER16 / A=ø13 6.5-6.0
W9990372 ER16 / A=ø13 7.0-6.5
W9990373 ER16 / A=ø13 7.5-7.0
W9990374 ER16 / A=ø13 8.0-7.5
W9990375 ER16 / A=ø13 8.5-8.0
W9990376 ER16 / A=ø13 9.0-8.5
W9990377 ER16 / A=ø13 9.5-9.0
W9990378 ER16 / A=ø13 10.0-9.5
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets45
4
A
Sealing disks, type ER20
for internal cooling lubricant supply
W999038-
Part number Type ER20Sealing range
W9990379 ER20 / A=ø16 3.0-2.5
W9990380 ER20 / A=ø16 3.5-3.0
W9990381 ER20 / A=ø16 4.0-3.5
W9990382 ER20 / A=ø16 4.5-4.0
W9990383 ER20 / A=ø16 5.0-4.5
W9990384 ER20 / A=ø16 5.5-5.0
W9990385 ER20 / A=ø16 6.0-5.5
W9990386 ER20 / A=ø16 6.5-6.0
W9990387 ER20 / A=ø16 7.0-6.5
W9990388 ER20 / A=ø16 7.5-7.0
W9990389 ER20 / A=ø16 8.0-7.5
W9990390 ER20 / A=ø16 8.5-8.0
W9990391 ER20 / A=ø16 9.0-8.5
W9990392 ER20 / A=ø16 9.5-9.0
W9990393 ER20 / A=ø16 10.0-9.5
W9990394 ER20 / A=ø16 10.5-10.0
W9990395 ER20 / A=ø16 11.0-10.5
W9990396 ER20 / A=ø16 11.5-11.0
W9990397 ER20 / A=ø16 12.0-11.5
W9990398 ER20 / A=ø16 12.5-12.0
W9990399 ER20 / A=ø16 13.0-12.5
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets46
4
A
Sealing disks, type ER25
for internal cooling lubricant supply
W99904--
Part number Type ER25Sealing range
W9990400 ER25 / A=ø21 3.0-2.5
W9990401 ER25 / A=ø21 3.5-3.0
W9990402 ER25 / A=ø21 4.0-3.5
W9990403 ER25 / A=ø21 4.5-4.0
W9990404 ER25 / A=ø21 5.0-4.5
W9990405 ER25 / A=ø21 5.5-5.0
W9990406 ER25 / A=ø21 6.0-5.5
W9990407 ER25 / A=ø21 6.5-6.0
W9990408 ER25 / A=ø21 7.0-6.5
W9990409 ER25 / A=ø21 7.5-7.0
W9990410 ER25 / A=ø21 8.0-7.5
W9990411 ER25 / A=ø21 8.5-8.0
W9990412 ER25 / A=ø21 9.0-8.5
W9990413 ER25 / A=ø21 9.5-9.0
W9990414 ER25 / A=ø21 10.0-9.5
W9990415 ER25 / A=ø21 10.5-10.0
W9990416 ER25 / A=ø21 11.0-10.5
W9990417 ER25 / A=ø21 11.5-11.0
W9990418 ER25 / A=ø21 12.0-11.5
W9990419 ER25 / A=ø21 12.5-12.0
W9990420 ER25 / A=ø21 13.0-12.5
W9990421 ER25 / A=ø21 13.5-13.0
W9990422 ER25 / A=ø21 14.0-13.5
W9990423 ER25 / A=ø21 14.5-14.0
W9990424 ER25 / A=ø21 15.0-14.5
W9990425 ER25 / A=ø21 15.5-15.0
W9990426 ER25 / A=ø21 16.0-15.5
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets47
Sealing Disks, Type ER32
for internal cooling lubricant supply
W99906--
4
A
Part Number Type ER32Sealing range
W9990600 ER32 / A=ø27 2.5 - 3.0
W9990601 ER32 / A=ø27 3.0 - 3.5
W9990602 ER32 / A=ø27 3.5 - 4.0
W9990603 ER32 / A=ø27 4.0 - 4.5
W9990604 ER32 / A=ø27 4.5 - 5.0
W9990605 ER32 / A=ø27 5.0 - 5.5
W9990606 ER32 / A=ø27 5.5 - 6.0
W9990607 ER32 / A=ø27 6.0 - 6.5
W9990608 ER32 / A=ø27 6.5 - 7.0
W9990609 ER32 / A=ø27 7.0 - 7.5
W9990610 ER32 / A=ø27 7.5 - 8.0
W9990611 ER32 / A=ø27 8.0 - 8.5
W9990612 ER32 / A=ø27 8.5 - 9.0
W9990613 ER32 / A=ø27 9.0 - 9.5
W9990614 ER32 / A=ø27 9.5 - 10.0
W9990615 ER32 / A=ø27 10.0 - 10.5
W9990616 ER32 / A=ø27 10.5 - 11.0
W9990617 ER32 / A=ø27 11.0 - 11.5
W9990618 ER32 / A=ø27 11.5 - 12.0
W9990619 ER32 / A=ø27 12.0 - 12.5
W9990620 ER32 / A=ø27 12.5 - 13.0
W9990621 ER32 / A=ø27 13.0 - 13.5
W9990622 ER32 / A=ø27 13.5 - 14.0
W9990623 ER32 / A=ø27 14.0 - 14.5
W9990624 ER32 / A=ø27 14.5 - 15.0
W9990625 ER32 / A=ø27 15.0 - 15.5
W9990626 ER32 / A=ø27 15.5 - 16.0
W9990627 ER32 / A=ø27 16.0 - 16.5
W9990628 ER32 / A=ø27 16.5 - 17.0
W9990629 ER32 / A=ø27 17.0 - 17.5
W9990630 ER32 / A=ø27 17.5 - 18.0
W9990631 ER32 / A=ø27 18.0 - 18.5
W9990632 ER32 / A=ø27 18.5 - 19.0
W9990633 ER32 / A=ø27 19.0 - 19.5
W9990634 ER32 / A=ø27 19.5 - 20.0
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets48
A
B
490219.0--1
Part number Chuck key
Clamping nut A B
490219.0111 ER11 32 95
490219.0161 ER16 44 145
490219.0201 ER20 52 170
Chuck keyType EPfor clamping nuts Hi-Q/ER or Hi-Q/ERC
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets49
B
A
490219.0--1
Part number Chuck key
Clamping nut A B
490219.0251 ER25 65 210
490219.0321 ER32 75 250
490219.0401 ER40 90 290
Chuck keyType Efor clamping nuts Hi-Q/ER or Hi-Q/ERC
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets50
A
B
Chuck key
for clamping nuts Hi-Q/ERM or Hi-Q/ERMC
490219.2--1
Part number Chuck key
Clamping nut A B
323118 ER8 12.4 74
326792 ER11 16.8 90
490219.2161 ER16 22.5 117
490219.2201 ER20 29 129
490219.2251 ER25 36 141
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets51
Chuck key
for clamping nuts ER8-MS
W9990495
7
12,3
19,2
0,6
4
76
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets52
Chuck key
for clamping nuts Hi-Q/ERAX or Hi-Q/ERAXC
490219.3--1
Part number Chuck key
Clamping nut
490219.3111 ER11
490219.3161 ER16
490219.3201 ER20
490219.3251 ER25
325767 ER32
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets53
A
B
Mill arbor wrench
203020.1---
Part number Chuck key
For mill tighten-ing screw
Size A B
203020.1130 M6 13 ø18 160
203020.1160 M8 16 ø22 180
203020.1220 M10 22 ø28 200
203020.1270 M12 27 ø35 225
203020.1320 M16 32 ø42 250
203020.1400 M20 40 ø52 280
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets54
B
A
ø
Hook wrench
490340.----
Part number Chuck key
ø A B
490340.0240 22-26 5 136
490340.0300 28-32 5 136
490340.0360 34-38 5 170
490340.0430 40-45 5 170
490340.0460 46 5 140
490340.0500 48-52 5 206
490340.0590 55-62 6 242
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets55
Hook Wrench
490344.1---
Part Number Chuck key
D d
490344.1400 40-42 4
490344.1450 45-50 5
490344.1580 58-62 5
dD
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets56
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets57
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets58
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Collets59
TRAUB-DrehmaschinenGmbH & Co. KGHauffstraße 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALEPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Straße 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALEPhone +49 (0) 711 3191-600Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Reductions & mountings
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog pageWS7800.43-- 9Mounting sleeve ø16h6
W62220.01-- 10Mounting sleeve ø20h6
W63220.02-- 11Mounting sleeve ø32h6
W64220.02-- 12Mounting sleeve ø40h6
W64221.14-- 13Mounting sleeve ø40h6
W64221.17-- 14Mounting sleeve ø50h6
W35200.1905 15Adapter sleeve 1“ to 3/4“
Reductions & mountings
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings3
Catalog page
Reductions & mountings
W94280.21-- 16Mounting sleeve ø12h6
W67511.04-- 17Mounting sleeve ø16h6
W68510.04-- 18Mounting sleeve ø20h6
W62221.41-- 19Mounting sleeve ø25h6
W63221.40-- 20Mounting sleeve ø32h6
W9990097 21Mounting sleeve ø32h6
W9990098 22Mounting sleeve ø32h6
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings4
Catalog page
Reductions & mountings
W9990099 23Mounting sleeve ø32h6
W64222.41-- 24Mounting sleeve ø40h6
W64220.46-- 25Mounting sleeve ø60h6
W63220.42-- 26Mounting sleeve
9931--.---- 27Clamping sleeves
9931--.---- 28Clamping sleeves
W95280.215- 29Clamping sleeve
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings5
Catalog page
Reductions & mountings
993120.---- 30Clamping sleeveForm A
993120.---- 31Clamping sleeveForm B
W37610.2012 32Clamping sleeve for slotting tool holder, internal
W95280.115- 33Clamping sleeve
9938--.---- 34Thrust blocks
W64501.1120 35Extension pinfor clamping sleeves 993120.----
W64501.1125 36Extension pinfor clamping sleeves 993120.----
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings6
Catalog page
Reductions & mountings
W67850.0150 37Mounting sleeve
W67850.0160 38Mounting sleeve
W61851.0050 39Mounting sleeve ø13h6
W92853.2050 40Mounting sleeve ø22h6
W92853.2060 41Mounting sleeve ø27h6
WK7850.22 42Mounting sleeve
WK8503.22 43Mounting sleeve
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings7
Catalog page
Reductions & mountings
WK8504.40 44Mounting sleeve
W95281.1550 45Reduction
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings8
Mounting sleeve ø16h6
WS7800.43--
Part number D
WS7800.4306 ø6F7
WS7800.4308 ø8F7
WS7800.4310 ø10F7
WS7800.4312 ø12F7
D
ø16h
6
43
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings9
Mounting sleeve ø20h6
W62220.01--
Part number D
W62220.0106 ø6F7
W62220.0108 ø8F7
W62220.0110 ø10F7
W62220.0111 ø11F7
W62220.0112 ø12F7
W62220.0158 ø5/8“F7
W62220.0115 ø15F7
W62220.0102 ø1/2“F7
W62220.0116 ø16F7
8W62220.01 pre-machined
D
ø20h
6
42
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings10
Mounting sleeve ø32h6
W63220.02--
Part number D
W63220.0208 ø8F7
W63220.0210 ø10F7
W63220.0212 ø12F7
W63220.0215 ø15F7
W63220.0216 ø16F7
W63220.0218 ø18F7
W63220.0234 ø3/4“F7
W63220.0220 ø20F7
W63220.0225 ø25F7
W63220.0201 ø1“F7
8W63220.02 pre-machined
D
ø32h
6
65
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings11
Mounting sleeve ø40h6
W64220.02--
Part number D
W64220.0206 ø6F7
W64220.0208 ø8F7
W64220.0210 ø10F7
W64220.0212 ø12F7
W64220.0202 ø1/2“F7
W64220.0214 ø14F7
W64220.0215 ø15F7
W64220.0216 ø16F7
W64220.0218 ø18F7
W64220.0234 ø3/4“F7
W64220.0220 ø20F7
W64220.0222 ø22F7
W64220.0224 ø24F7
W64220.0225 ø25F7
W64220.0254 ø1 1/4“F7
W64220.0232 ø32F7
D
ø40h
6
72
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings12
Mounting sleeve ø40h6
W64221.14--
Part number D
W64221.1408 ø8F7
W64221.1412 ø12F7
W64221.1416 ø16F7
W64221.1420 ø20F7
W64221.1425 ø25F7
W64221.1430 ø30F7
W64221.1432 ø32F7
D
ø40h
6
75
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings13
Mounting sleeve ø50h6
W64221.17--
Part number D
W64221.1730 ø30F7
W64221.1740 ø40F7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings14
ø3/4
"
ø1"
46
Adapter sleeve 1“ to 3/4“
W35200.1905
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings15
ø12h
6
D
25
23
2 198,
5
Mounting sleeve ø12h6
W94280.21--
Part number D
W94280.2103 ø3H7
W94280.2104 ø4H7
W94280.2105 ø5H7
W94280.2106 ø6H7
W94280.2108 ø8H7
W94280.2110 ø10H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings16
ø16h
6
D
36
34
3 2611
Mounting sleeve ø16h6
W67511.04--
Part number D
W67512.0403 ø3H7
W67512.0404 ø4H7
W67511.0405 ø5H7
W67511.0406 ø6H7
W67511.0407 ø7H7
W67511.0408 ø8H7
W67511.0409 ø9H7
W67511.0410 ø10H7
W67511.0411 ø11H7
W67511.0412 ø12H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings17
ø20h
6
D
36
34
2,5 2713
Mounting sleeve ø20h6
W68510.04--
Part number D
W68510.0403 ø3H7
W68511.0404 ø4H7
W68510.0405 ø5H7
W68510.0406 ø6H7
W68510.0407 ø7H7
W68510.0408 ø8H7
W68510.0409 ø9H7
W68510.0410 ø10H7
W68510.0411 ø11H7
W68510.0412 ø12H7
W68510.0414 ø14H7
W68510.0415 ø15H7
W68510.0416 ø16H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings18
ø25h
6
D
47
45
4,75 37,5
14,5
Mounting sleeve ø25h6
W62221.41--
Part number D
W9990489 ø4H7
W62221.4106 ø6H7
W62221.4108 ø8H7
W62221.4110 ø10H7
W62221.4112 ø12H7
W62221.4114 ø14H7
W62221.4115 ø15H7
W62221.4116 ø16H7
W62221.4118 ø18H7
W62221.4119 ø3/4“H7
W62221.4120 ø20H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings19
ø32h
6
D
63
58
7 46
14
Mounting sleeve ø32h6
W63221.40--
Part number D
W63221.4006 ø6H7
W63221.4008 ø8H7
W63221.4010 ø10H7
W63221.4011 ø11H7
W63221.4012 ø12H7
W63221.4013 ø13H7
W63221.4014 ø14H7
W63221.4015 ø15H7
W63221.4016 ø16H7
W63221.4017 ø17H7
W63221.4018 ø18H7
W63221.4019 ø19H7
W63221.4034 ø3/4“H7
W63221.4020 ø20H7
W63221.4025 ø25H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings20
MK
1
ø32h
6
75
73 ø36
Mounting sleeve ø32h6
W9990097
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings21
MK
2
ø32h
6
74
72 ø36
Mounting sleeve ø32h6
W9990098
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings22
MK
3
ø32h
6
92
90 ø36
Mounting sleeve ø32h6
W9990099
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings23
ø40h
6
D
63
68
6 49
14
Mounting sleeve ø40h6
W64222.41--
Part number D
W64222.4106 ø6H7
W64222.4108 ø8H7
W64222.4110 ø10H7
W64222.4112 ø12H7
W64222.4113 ø13H7
W64222.4114 ø14H7
W64222.4115 ø15H7
W64222.4116 ø16H7
W64222.4118 ø18H7
W64222.4134 ø3/4“H7
W64222.4120 ø20H7
W64222.4124 ø24H7
W64222.4125 ø25H7
W64222.4101 ø1“H7
W64222.4130 ø30H7
W64222.4132 ø32H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings24
ø60h
6
D
80
L1
6 L2
18
Mounting sleeve ø60h6
W64220.46--
Part number D L1 L2
W64221.4616 ø16 H7 75 49
W64221.4634 ø3/4“H7 75 49
W64221.4620 ø20H7 75 49
W64221.4625 ø25H7 75 49
W64220.4632 ø32H7 78 68
W64220.4640 ø40H7 78 68
W64220.4650 ø50H7 78 68
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings25
ø32h
6
58
A
ø40
Mounting sleeve
W63220.42--
Part number A
W63220.4208 ø8H7
W63220.4210 ø10H7
W63220.4212 ø12H7
W63220.4214 ø14H7
W63220.4216 ø16H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings26
Clamping sleeves
They can also be delivered with rough-turned or rough-ground external diameters.rough-turned: 7993112. / 7993118. / 7993125. / 7993132.rough-ground: 8993112. / 8993115. / 8993118. / 8993125. / 8993132.Material: Tempered steel
9931--.----
D ø12h6 ø15h6 ø18h6 ø25h6 ø32h6
L 20 24 26 36 40
L1 5 7 7 12 13
L2 10 10 12 12 14
D1 Part number
ø2.0H7 993112.0200 993115.0200
ø2.5H7 993112.0250 993115.0250
ø3.0H7 993112.0300 993115.0300
ø3.5H7 993112.0350 993115.0350
ø4.0H7 993112.0400 993115.0400
ø4.5H7 993112.0450 993115.0450
ø5.0H7 993112.0500 993115.0500 993125.0500
ø5.5H7 993112.0550 993115.0550
ø6.0H7 993112.0600 993115.0600 993118.0600 993125.0600
ø6.5H7 993112.0650 993115.0650
ø7.0H7 993112.0700 993115.0700 993118.0700 993125.0700
ø7.5H7 993112.0750 993115.0750
ø8.0H7 993112.0800 993115.0800 993118.0800 993125.0800
ø9.0H7 993112.0900 993115.0900 993118.0900 993125.0900
ø10.0H7 993115.1000 993118.1000 993125.1000
D h
6
D1
L
L2L1
D h
6
L
D h
10
L
vorgedreht vorgeschliffen
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings27
Clamping sleeves
They can also be delivered with rough-turned or rough-ground external diameters.rough-turned: 7993112. / 7993118. / 7993125. / 7993132.rough-ground: 8993112. / 8993115. / 8993118. / 8993125. / 8993132.Material: Tempered steel
9931--.----
D ø12h6 ø15h6 ø18h6 ø25h6 ø32h6
L 20 24 26 36 40
L1 5 7 7 12 13
L2 10 10 12 12 14
D1 Part number
ø11.0H7 993115.1100 993118.1100 993125.1100
ø12.0H7 993115.1200 993118.1200 993125.1200
ø13.0H7 993125.1300
ø14.0H7 993118.1400 993125.1400 993132.1400
ø15.0H7 993118.1500 993125.1500 993132.1500
ø16.0H7 993125.1600 993132.1600
ø17.0H7 993125.1700 993132.1700
ø18.0H7 993125.1800 993132.1800
ø19.0H7 993125.1900 993132.1900
ø20.0H7 993125.2000 993132.2000
ø22.0H7 993132.2200
ø24.0H7 993132.2400
ø25.0H7 993132.2500
ø26.0H7 993132.2600
D h
6
D1
L
L2L1
D h
6
L
D h
10
L
vorgedreht vorgeschliffen
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings28
ø16h
6
D
26
Clamping sleeve
W95280.215-
Part number D
W95280.2153 ø6H7
W95280.2154 ø8H7
W95280.2155 ø10H7
W95280.2156 ø12H7
W95280.2157 ø14H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings29
D ø2
0h6
7 14
40
Clamping sleeve
Form A
993120.----
AccessoriesExtension pinW64501.1120
Part number D
993120.0600 ø6
993120.0700 ø7
993120.0800 ø8
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings30
ø20h
6
D
7 14
40
Clamping sleeve
Form B
993120.----
AccessoriesExtension pinW64501.1125
Part number D
993120.0900 ø9
993120.1000 ø10
993120.1100 ø11
993120.1200 ø12
993120.1400 ø14
993120.1500 ø15
993120.1600 ø16
993120.1800 ø18
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings31
ø 12
H7
ø 20
h6
28
11
ø 12
20
ø 6
Clamping sleeve for slotting tool holder, internal
W37610.2012
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings32
Clamping sleeve
W95280.115-
D
ø20h
6
29
7
ø9,5
Part number D
W95280.1153 ø6H7
W95280.1154 ø8H7
W95280.1155 ø10H7
W95280.1156 ø12H7
W95280.1157 ø14H7
W95280.1158 ø16H7
W95280.1159 ø18H7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings33
Thrust blocks
They can also be delivered with rough-turned external diameters.rough-turned: 8993812. / 8993815. / 8993818. / 8993825. / 8993832.Material: Hardened steel alloy
9938--.----
D ø12-0.2 ø15-0.2 ø18-0.2 ø25-0.2 ø32-0.2
B 9.9 9.9 11.9 11.9 13.9
D1 Part number
ø2.0G7
ø2.5G7
ø3.0G7
ø3.5G7 993812.0350 993815.0350
ø4.0G7 993812.0400
ø4.5G7 993812.0450
ø5.0G7 993812.0500 993815.0500 993825.0500
ø5.5G7 993812.0550
ø6.0G7 993812.0600 993815.0600 993825.0600
ø6.5G7
ø7.0G7 993812.0700 993825.0700
ø7.5G7 993825.0800
ø8.0G7 993812.0800 993815.0800 993825.0900
ø9.0G7 993825.1000
D1
15 -0
,2
B -0,1
15 -0
,2
B -0,1
vorgedreht
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings34
Extension pin
for clamping sleeves 993120.----
W64501.1120
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings35
Extension pin
for clamping sleeves 993120.----
W64501.1125
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings36
ø22h
6
ø30
10
12 6
Mounting sleeve
W67850.0150
Accessories Rings25139-.---
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings37
ø27h
6
ø40
8
12 6
Mounting sleeve
W67850.0160
Accessories Rings25139-.---
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings38
dD
24
28 4
A
B
C
Mounting sleeve ø13h6
W61851.0050
Accessories Rings25139-.---
Part number d D A B C
W61851.0050 ø13h6 ø22 W61851.0052 W61851.0056 W61851.0054
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings39
dD
24
28 4
A
B
C
Mounting sleeve ø22h6
W92853.2050
Accessories Rings25139-.---
Part number d D A B C
W92853.2050 ø22h6 ø32 W92853.2022 W92853.2026 W92853.2024
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings40
dD
24
28 4
A
B
C
Mounting sleeve ø27h6
W92853.2060
Accessories Rings25139-.---
Part number d D A B C
W92853.2060 ø27h6 ø40 W92853.2062 W68850.2458 W92853.2064
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings41
ø9H
7
ø16h
6
ø22
2,5 27,5
34
Mounting sleeve
WK7850.22
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings42
Mounting sleeve
WK8503.22
ø22
ø9H
7
ø16h
6
40
44
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings43
ø9H
7
ø22h
6
ø32
34
40
6
Mounting sleeve
WK8504.40
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings44
ø36
ø75
ø51
72
60
Reduction
W95281.1550
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings45
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings46
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Reductions & mountings47
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Quick-change inserts WFB20-12
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog pageW9990125 16Quick-change inserts WFB20-12W-T shrink-fit chuck, ø3x51
836604 17Quick-change inserts WFB20-12W-T shrink-fit chuck, ø3x37
836614 18Quick-change inserts WFB20-12W-T shrink-fit chuck, ø3x172-piece type
W9990126 19Quick-change inserts WFB20-12W-T shrink-fit chuck, ø4x50
836605 20Quick-change inserts WFB20-12W-T shrink-fit chuck, ø4x35
836615 21Quick-change inserts WFB20-12W-T shrink-fit chuck, ø4x172-piece type
W9990127 22Quick-change inserts WFB20-12W-T shrink-fit chuck, ø6x47
Quick-change inserts WFB20-12 shrink-fit mounting
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-123
Catalog page
Quick-change inserts WFB20-12 shrink-fit mounting
836606 23Quick-change inserts WFB20-12W-T shrink-fit chuck, ø6x32
836616 24Quick-change inserts WFB20-12W-T shrink-fit chuck, ø6x172-piece type
W9990128 25Quick-change inserts WFB20-12W-T shrink-fit chuck, ø8x45
836607 26Quick-change inserts WFB20-12W-T shrink-fit chuck, ø8x30
836617 27Quick-change inserts WFB20-12W-T shrink-fit chuck, ø8x202-piece type
W9990247 28Quick-change inserts WFB20-12W-T shrink-fit chuck, ø10x272-piece type
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-124
Catalog page
Quick-change inserts WFB20-12 Weldon mounting
W9990119 30Quick-change inserts WFB20-12W-T Weldon DIN 1865 form B, ø6x43
W9990291 31Quick-change inserts WFB20-12W-T Weldon DIN 1865 form B, ø6x43
836610 32Quick-change inserts WFB20-12W-T Weldon DIN 1865 form B, ø6x27.5
W9990120 33Quick-change inserts WFB20-12W-T Weldon DIN 1865 form B, ø8x43
836611 34Quick-change inserts WFB20-12W-T Weldon DIN 1865 form B, ø8x27.5
W9990121 35Quick-change inserts WFB20-12W-T Weldon DIN 1865 form B, ø10x43
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-125
Catalog page
Quick-change inserts WFB20-12 collet mounting
W9990112 38Quick-change inserts WFB20-12W-T collet, ER8
W9990113 39Quick-change inserts WFB20-12W-T collet, ER11
W9990123 40Quick-change inserts WFB20-12W-T collet, ER11
836621 41Quick-change inserts WFB20-12W-T collet, ER11
W9990124 42Quick-change inserts WFB20-12W-T collet, ER16
836622 43Quick-change inserts WFB20-12W-T collet, ER16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-126
Catalog page
Quick-change inserts WFB20-12 mill arbor mounting
W9990184 46Quick-change inserts WFB20-12W-T mill arbor, ø5
W9990185 47Quick-change inserts WFB20-12W-T mill arbor, ø8
W9990186 48Quick-change inserts WFB20-12W-T mill arbor, ø10
W9990187 49Quick-change inserts WFB20-12W-T mill arbor, ø13
W9990188 50Quick-change inserts WFB20-12W-T mill arbor, ø16
W9990189 51Quick-change inserts WFB20-12W-T mill arbor, ø22
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-127
Catalog page
Quick-change inserts WFB20-12 hydraulic expansion mounting
W9990110 54Quick-change inserts WFB20-12W-T Hydro-expand, ø6
W9990111 55Quick-change inserts WFB20-12W-T Hydro-expand, ø8
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-128
Catalog page
Quick-change inserts WFB20-12 boring tool holder
W9990456 58Quick-change inserts WFB20-12W-T mounting, ø6x40
W9990457 59Quick-change inserts WFB20-12W-T mounting, ø8x40
W9990458 60Quick-change inserts WFB20-12W-T mounting, ø10x40
W9990211 61Quick-change inserts WFB20-12W-T mounting, ø12x40
W9990212 62Quick-change inserts WFB20-12W-T mounting, ø16x40
W9990213 63Quick-change inserts WFB20-12W-T mounting, ø20x40
W9990460 64Quick-change inserts WFB20-12W-T mounting, ø1/8"x40
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-129
Catalog page
Quick-change inserts WFB20-12 boring tool holder
W9990461 65Quick-change inserts WFB20-12W-T mounting, ø3/16"x40
W9990459 66Quick-change inserts WFB20-12W-T mounting, ø1/4"x40
W9990214 67Quick-change inserts WFB20-12W-T mounting, ø3/4"x40
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1210
Catalog page
Quick-change inserts WFB20-12 Horn S-Mini
W9990230 70Quick-change inserts WFB20-12W-T Horn clamping holder, type B114, left
W9990114 71Quick-change inserts WFB20-12W-T Horn S-mini, Type 105
W9990129 72Quick-change inserts WFB20-12W-T Horn S-mini, Type 105
W9990115 73Quick-change inserts WFB20-12W-T Horn S-mini, Type 110
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1211
Catalog page
Quick-change inserts WFB20-12 turning tool holder
W9990231 76Quick-change inserts WFB20-12W-T turning tool holder for CC.. 09T3..right-hand version
W9990232 77Quick-change inserts WFB20-12W-T turning tool holder for DC.. 11T3..right-hand version
W9990233 78Quick-change inserts WFB20-12W-T turning tool holder for VC.. 1103..right-hand version
W9990492 79Quick-change inserts WFB20-12W-T turning tool holder for CC.. 09T3..left-hand version
W9990493 80Quick-change inserts WFB20-12W-T turning tool holder for DC.. 11T3..left-hand version
W9990494 81Quick-change inserts WFB20-12W-T turning tool holder for VC.. 1103..left-hand version
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1212
Catalog page
Quick-change inserts WFB20-12 tapping chuck
W9990116 84Quick-change inserts WFB20-12W-T thread cutting chuck GR1
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1213
Catalog page
Quick-change inserts WFB20-12 other
W9990117 86Quick-change inserts WFB20-12W-T shrink-fit position, ø12
W9990131 87Quick-change inserts WFB20-12W-T extension 20 mm
W9990288 88Quick-change inserts WFB20-12W-T adapter for broaching tool
837714 89Quick-change inserts WFB20-12W-T blanking plugs
837062 90Receptacle, WFB20-12Shrink-fit
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1214
Accessories
Quick-change inserts
WFB20-12
Shrink-fit mounting
904006
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1215
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø3x51
W9990125
79
ø20
ø12
ø10
51
ø3
28 ø30
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1216
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø3x37
836604
37
ø20
ø30
ø13
ø12
ø3
9
65
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1217
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø3x17
2-piece type
836614
17
ø20
ø30
ø3
ø12
ø13,
4
11
45
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1218
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø4x50
W9990126
78
ø20
ø12
ø30
50
ø12
28
ø4
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1219
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø4x35
836605
35
ø20
ø30
ø13
ø4
ø12
7
63
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1220
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø4x17
2-piece type
836615
17
ø30
ø4
ø13,
4
ø12
11
45
ø20
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1221
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø6x47
W9990127
75
ø20
ø12
ø30
ø15
47
ø6
36
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1222
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø6x32
836606
32
ø20
ø30
ø13
ø6
ø12
4
60
AccessoriesAdjusting screw W&F 326794
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1223
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø6x17
2-piece type
836616
17
45
ø20
ø12ø6
ø30
19
ø14,
8
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1224
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø8x45
W9990128
73
ø20
ø12
ø30
ø17
45
36
ø8
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1225
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø8x30
836607
30
ø20
ø30
ø15
ø8
ø12
4
58
AccessoriesAdjusting screw W&F 326794
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1226
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø8x20
2-piece type
836617
20
ø20
ø30
ø8
ø14,
8
16
48
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1227
Quick-change inserts WFB20-12
W-T shrink-fit chuck, ø10x27
2-piece type
W9990247
27
55
ø20
ø12
ø30
33,5
ø10
AccessoriesAdjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1228
Accessories
Quick-change inserts
WFB20-12
Weldon mounting
904007
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1229
Quick-change inserts WFB20-12
W-T Weldon DIN 1865 form B, ø6x43
W9990119
71
ø20
ø12
ø30
ø25
43
ø6
7
AccessoriesAdjusting screw W&F 326793
Clamping screw W&F 326789
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1230
W9990291
Quick-change inserts WFB20-12
W-T Weldon DIN 1865 form B, ø6x43
AccessoriesAdjusting screw W&F 326793
Clamping screw W&F 326789
71
ø20
ø12
ø30
ø17
43
ø6
7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1231
Quick-change inserts WFB20-12
W-T Weldon DIN 1865 form B, ø6x27.5
836610
27,5
ø20
ø30
ø17
ø6 ø12
8,5
AccessoriesAdjusting screw W&F 326793
Clamping screw W&F 326789
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1232
Quick-change inserts WFB20-12
W-T Weldon DIN 1865 form B, ø8x43
W9990120
71
ø20
ø12
ø30
ø25
43
ø8
7
AccessoriesAdjusting screw W&F 326793
Clamping screw W&F 326790
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1233
Quick-change inserts WFB20-12
W-T Weldon DIN 1865 form B, ø8x27.5
836611
27,5
ø20
ø30
ø21,
3ø8 ø1
2
8,5
AccessoriesAdjusting screw W&F 326793
Clamping screw W&F 326790
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1234
Quick-change inserts WFB20-12
W-T Weldon DIN 1865 form B, ø10x43
W9990121
71
ø20
ø12
ø30
ø25
43
ø10
3
AccessoriesAdjusting screw W&F 326793
Clamping screw W&F 326791
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1235
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1236
Accessories
Quick-change inserts
WFB20-12
Collet mounting
904008
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1237
Quick-change inserts WFB20-12
W-T collet, ER8
W9990112
max. 25,6
ø20
ø12
ø30max.53,6
s19
ø12
max
. ø5
7
AccessoriesCollet 901930.8---
Clamping nut 323117
Chuck key 323118
Adjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1238
ø20
s22
max.13
18
38
ø30
Quick-change inserts WFB20-12
W-T collet, ER11
W9990113
AccessoriesCollet 901930.0---
Tapping collet 3239--
Tapping collet 900288
Clamping nut 901939.5111
Chuck key 420219.3111
Set screw 410156.0510
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1239
Quick-change inserts WFB20-12
W-T collet, ER11
W9990123
ø20
ø12
ø30
ø26
ø19
max.45
28,5
s22
s17
max
. ø7
11,5
66,5
AccessoriesCollet 901930.0---
Tapping collet 3239--
Tapping collet 900288
Clamping nut 322438
Chuck key 490219.0111
Adjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1240
Quick-change inserts WFB20-12
W-T collet, ER11
836621
ø20
max. 25,35
s179
s22
8,5
46,8
ø30
AccessoriesCollet 901930.0---
Tapping collet 3239--
Tapping collet 900288
Clamping nut 322438
Chuck key 490219.0111
Adjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1241
Quick-change inserts WFB20-12
W-T collet, ER16
W9990124
ø20
ø12
ø30
ø28
max.43
max
.ø10
4
60,5
AccessoriesCollet ER16 901930.1---
Collet ER16UP W99903--
Thread cutting collet 3230---
Clamping nut 901939.01
Chuck key 490219.0161
Adjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1242
Quick-change inserts WFB20-12
W-T collet, ER16
836622
max.30
ø20
ø10,
1
ø22
ø31
9
47,5
s30
AccessoriesCollet ER16 901930.1---
Collet ER16UP W99903--
Thread cutting collet 3230---
Clamping nut 901939.01
Chuck key 490219.0161
Adjusting screw W&F 326793
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1243
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1244
Accessories
Quick-change inserts
WFB20-12
Mill arbor mounting
904009
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1245
s15
ø30
ø12
ø20
75
335
ø5
1
2
ø10 A-A
A
A
Quick-change inserts WFB20-12
W-T mill arbor, ø5
W9990184
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1246
s27
ø30
ø12
ø20
ø8
1
35
74
267
ø15
A-A
A
A
Quick-change inserts WFB20-12
W-T mill arbor, ø8
W9990185
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1247
ø30
ø12
ø20
76,55
0,5
13
ø10
268
s27
ø17
A-A
A
A
Quick-change inserts WFB20-12
W-T mill arbor, ø10
W9990186
AccessoriesRings 251390.---- 251391.----
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1248
ø13
ø12
ø20
70
ø30
37
5
0,5
1
3
s27
ø20
26
ø22
A-A
A
A
Quick-change inserts WFB20-12
W-T mill arbor, ø13
W9990187
AccessoriesRings 251390.---- 251391.----
Mill arbor wrench 203020.1130
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1249
77
ø12
ø20
ø16
ø30
43
s27
1
10
2
3
26
ø24
ø27
A-A
A
A
Quick-change inserts WFB20-12
W-T mill arbor, ø16
W9990188
AccessoriesRings 251390.---- 251391.----
Mill arbor wrench 203020.1160
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1250
19
80
ø12
ø20
ø22
ø34
1
10
2
6
26
s27
A-A
A
A
Quick-change inserts WFB20-12
W-T mill arbor, ø22
W9990189
AccessoriesRings 251390.---- 251391.----
Mill arbor wrench 203020.1220
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1251
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1252
Accessories
Quick-change inserts
WFB20-12
Hydraulic expansion mounting
904010
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1253
39
67
ø31,
5
ø20
ø12
36
ø6
Quick-change inserts WFB20-12
W-T Hydro-expand, ø6
W9990110
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1254
68
39
ø32
ø8
29,5
ø20
ø12
Quick-change inserts WFB20-12
W-T Hydro-expand, ø8
W9990111
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1255
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1256
Accessories
Quick-change inserts
WFB20-12
Boring tool holder
904011
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1257
W9990456
Quick-change inserts WFB20-12
W-T mounting, ø6x40
68
ø6H
6ø1
8
ø12
ø20
8
2032
5,5
41
40
45°
ø30
8x45°
AccessoriesAdjusting screw W&F 326794
Set screw 410156.0605
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1258
W9990457
Quick-change inserts WFB20-12
W-T mounting, ø8x40
68
ø8H
6ø2
2
ø12
ø20
8
20
32
5,5
41
40
45°8x45°
ø30
AccessoriesAdjusting screw W&F 326794
Set screw 410156.0608
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1259
W9990458
Quick-change inserts WFB20-12
W-T mounting, ø10x40
68
ø10H
6ø2
2
ø12
ø20
8
20
32
5,5
41
40
45°8x45°
ø30
AccessoriesAdjusting screw W&F 326794
Set screw 410156.0605
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1260
6,25
16,75
35
5,5
45°8x45°
ø30
40
68
ø12
ø20
ø12
A-A
A
A
Quick-change inserts WFB20-12
W-T mounting, ø12x40
W9990211
AccessoriesMounting sleeve W94280.21--
Adjusting screw W&F 326794
Set screw 410156.0808
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1261
8
24
35
5,5
45°8x45°
ø16
ø30
40
68
ø12
ø20
A-A
A
A
Quick-change inserts WFB20-12
W-T mounting, ø16x40
W9990212
AccessoriesMounting sleeve W67511.04--
Adjusting screw W&F 326794
Set screw 410156.0808
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1262
9
24
35
5,5
45°8x45°
ø33
ø20
40
68
ø12
ø20
A-A
A
A
Quick-change inserts WFB20-12
W-T mounting, ø20x40
W9990213
AccessoriesMounting sleeve W68510.04--
Adjusting screw W&F 326794
Set screw 410156.0808
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1263
W9990460
Quick-change inserts WFB20-12
W-T mounting, ø1/8"x40
68
ø18
ø12
ø20
6,25
16,75
5,5
25
40
45°8x45°
ø30
ø1/8
"
AccessoriesAdjusting screw W&F 326794
Set screw 410156.0304
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1264
W9990461
Quick-change inserts WFB20-12
W-T mounting, ø3/16"x40
68
ø18
ø12
ø20
6,25
16,75
5,5
25
40
45°8x45°
ø30
ø3/1
6"
AccessoriesAdjusting screw W&F 326794
Set screw 410156.0405
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1265
W9990459
Quick-change inserts WFB20-12
W-T mounting, ø1/4"x40
68
ø18
ø12
ø20
6,25
16,75
5,5
30
40
8x45°
ø30
ø1/4
"
45°
AccessoriesAdjusting screw W&F 326794
Set screw 410156.0605
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1266
9
24
35
5,5
45°8x45°
ø33
ø3/4
"
40
68
ø12
ø20
A-A
A
A
Quick-change inserts WFB20-12
W-T mounting, ø3/4"x40
W9990214
AccessoriesAdjusting screw W&F 326794
Set screw 410156.0808
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1267
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1268
Accessories
Quick-change inserts
WFB20-12
Horn S-Mini
904012
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1269
ø20
ø11
ø33
59,4
Quick-change inserts WFB20-12
W-T Horn clamping holder, type B114, left
W9990230
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1270
Quick-change inserts WFB20-12
W-T Horn S-mini, Type 105
W9990114
45°
ø20
ø30
ø18
ø12
28Hor
n 10
5
8x45°
40
AccessoriesSet screw 410156.0606
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1271
Quick-change inserts WFB20-12
W-T Horn S-mini, Type 105
W9990129
55
ø20
ø30
ø18
ø12
43
Hor
n 10
5
45°8x45°
AccessoriesSet screw 410156.0606
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1272
Quick-change inserts WFB20-12
W-T Horn S-mini, Type 110
W9990115
40
ø20
ø30
ø20
ø12
14
Hor
n 11
0
45°
8x45°
AccessoriesSet screw 410156.0606
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1273
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1274
Accessories
Quick-change inserts
WFB20-12
Turning tool holder
904013
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1275
Quick-change inserts WFB20-12
W-T turning tool holder for CC.. 09T3..
right-hand version
W9990231
60
ø20
ø12
ø33
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1276
ø20
ø12
60
ø33
Quick-change inserts WFB20-12
W-T turning tool holder for DC.. 11T3..
right-hand version
W9990232
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1277
ø33
60
ø20
ø12
Quick-change inserts WFB20-12
W-T turning tool holder for VC.. 1103..
right-hand version
W9990233
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1278
ø20
ø12
ø33
60
Quick-change inserts WFB20-12
W-T turning tool holder for CC.. 09T3..
left-hand version
W9990492
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1279
ø20
ø12
ø33
60
Quick-change inserts WFB20-12
W-T turning tool holder for DC.. 11T3..
left-hand version
W9990493
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1280
ø20
ø12
ø33
60
Quick-change inserts WFB20-12
W-T turning tool holder for VC.. 1103..
left-hand version
W9990494
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1281
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1282
Accessories
Quick-change inserts
WFB20-12
Tap chuck
WZ9990.9613F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1283
Quick-change inserts WFB20-12
W-T thread cutting chuck GR1
W9990116
AccessoriesTapping collet 900288
Clamping nut 326681
Chuck key 326792
max. 34,4
ø20
ø12
ø30
17
ø22
ø16
2
62,4
4,9
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1284
Accessories
Quick-change inserts
WFB20-12
Miscell.
WZ9990.9612F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1285
Quick-change inserts WFB20-12
W-T shrink-fit position, ø12Horn type 108-111-114-116 w round shank, see drawing 900601
W9990117
ø30
1°
1°
ø12
35
63
ø20
ø12
46±2
Accessories Fixing pin 900812
Adjusting screw 326794
Ball-ended thrust screw 326795
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1286
Quick-change inserts WFB20-12
W-T extension 20 mm
W9990131
AccessoriesSet screw 326171
48
ø20
ø12
20
ø30
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1287
Quick-change inserts WFB20-12
W-T adapter for broaching tool
W9990288
ø3316
44
10
ø12
ø20
ø14
AccessoriesBroaching tool, internal 983305
Broaching tool, external 983306
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1288
Quick-change inserts WFB20-12
W-T blanking plugs
837714
ø30
(ø20
)
10 (11)
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1289
ø78
90
70
72
ø76
ø60
ø11
ø20
ø12+0,2
ø8,1+0,1
ø76
3
DIN82-RGE 1
15°
13
Receptacle, WFB20-12
Shrink-fit
837062
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1290
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB20-1291
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Quick-change inserts WFB24-16
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog page475766 8Quick-change inserts WFB24-16W-T shrink-fit chuck, ø3x34
475767 9Quick-change inserts WFB24-16W-T shrink-fit chuck, ø4x34
475768 10Quick-change inserts WFB24-16W-T shrink-fit chuck, ø6x34
475769 11Quick-change inserts WFB24-16W-T shrink fit chuck, ø8x30
475770 12Quick-change inserts WFB24-16W-T shrink fit chuck, ø10x30
Quick-change inserts WFB24-16 shrink-fit mounting
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-163
Catalog page
Quick-change inserts WFB24-16 Weldon mounting
475771 14Quick-change inserts WFB24-16W-T Weldon DIN 1835 form B, ø6x27.5
475772 15Quick-change inserts WFB24-16W-T Weldon DIN 1835 form B, ø8x27.5
475773 16Quick-change inserts WFB24-16W-T Weldon DIN 1835 form B, ø10x25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-164
Catalog page
Quick-change inserts WFB24-16 collet mounting
475774 18Quick-change inserts WFB24-16W-T collet, ER11
475775 19Quick-change inserts WFB24-16W-T collet, ER11
W9990477 20Quick-change inserts WFB24-16W-T collet, ER16
475776 21Quick-change inserts WFB24-16W-T collet, ER16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-165
Catalog page
Quick-change inserts WFB24-16 other
W9990149 24Quick-change inserts WFB24-16W-T blanking plugs
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-166
Accessories
Quick-change inserts
WFB24-16
Shrink-fit mounting
WZ9990.2406F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-167
Quick-change inserts WFB24-16
W-T shrink-fit chuck, ø3x34
475766
70
34 ±0,1
ø3
ø24
ø15,
44
7 -0,1
ø40
-0,0
5 +0,
007
-0,0
1
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-168
Quick-change inserts WFB24-16
W-T shrink-fit chuck, ø4x34
475767
70
34 ±0,1
ø4
ø24
ø15,
44
7 -0,1
ø40
-0,0
5 +0,
011
-0,0
14
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-169
Quick-change inserts WFB24-16
W-T shrink-fit chuck, ø6x34
475768
70
34 ±0,1
ø6
ø24
ø15,
44
7 -0,1
ø40
-0,0
5 +0,
012
-0,0
16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1610
Quick-change inserts WFB24-16
W-T shrink fit chuck, ø8x30
475769
66
30 ±0,1
ø8
ø24
ø15,
44
7 -0,1
ø40
-0,0
5+
0,01
2-0
,016
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1611
Quick-change inserts WFB24-16
W-T shrink fit chuck, ø10x30
475770
66
30 ±0,1
ø10
ø24
ø15,
44
7 -0,1
ø40
-0,0
5+
0,01
2-0
,016
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1612
Accessories
Quick-change inserts
WFB24-16
Weldon mounting
WZ9990.2407F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1613
Quick-change inserts WFB24-16
W-T Weldon DIN 1835 form B, ø6x27.5
475771
63,5
27,5
ø6H
14
ø24
ø15,
44
7 -0,1
ø40
-0,0
5
ø17
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1614
Quick-change inserts WFB24-16
W-T Weldon DIN 1835 form B, ø8x27.5
475772
63,5
27,5
ø8H
14
ø24
ø15,
44
7 -0,1
ø40
-0,0
5
ø21
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1615
Quick-change inserts WFB24-16
W-T Weldon DIN 1835 form B, ø10x25
475773
61
25
ø10H
14
ø24
ø15,
44
7 -0,1
ø40
-0,0
5
ø24
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1616
Accessories
Quick-change inserts
WFB24-16
Collet mounting
WZ9990.2408F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1617
Quick-change inserts WFB24-16
W-T collet, ER11
475774
42
ER
11
ø24
ø15,
44
7 -0,1
ø40
-0,0
5
6
AccessoriesCollet ER11901930.0---
Tapping collet 3239--
Tapping collet 900288
Clamping nut M18x1901939.5111
Chuck key E11490219.3111
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1618
Quick-change inserts WFB24-16
W-T collet, ER11
475775
50,5
ER
11
ø24
ø15,
44
7 -0,1
ø40
-0,0
5
14,5
12
AccessoriesCollet ER11901930.0---
Tapping collet 3239--
Tapping collet 900288
Clamping nut322438
Chuck key E11490219.0111
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1619
Quick-change inserts WFB24-16
W-T collet, ER16
W9990477
ø15,
44
ø24
ø40
9
ø28
max. 66
max. 30
ER
16
AccessoriesCollet ER16901930.1---
Collet ER16UPW99903--
Tapping collet 3230--
Clamping nut901939.01
Chuck key E16490219.0161
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1620
Quick-change inserts WFB24-16
W-T collet, ER16
475776
ER
16
ø24
32
10 7-0,1
ø40-
0,05
16±0,1
52
ø15,
44
AccessoriesCollet ER16901930.1---
Collet ER16UPW99903--
Tapping collet 3230--
Clamping nut901939.5161
Chuck key E16490219.3161
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1621
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1622
Accessories
Quick-change inserts
WFB24-16
Miscell.
WZ9990.2499F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1623
Quick-change inserts WFB24-16
W-T blanking plugs
W9990149
10
ø40
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1624
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1625
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1626
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB24-1627
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Quick-change inserts WFB32-20
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog page836260 12Quick-change inserts WFB32-20W-T shrink fit chuck, ø3x28
836261 13Quick-change inserts WFB32-20W-T shrink fit chuck, ø4x28
836262 14Quick-change inserts WFB32-20W-T shrink fit chuck, ø6x32
836263 15Quick-change inserts WFB32-20W-T shrink fit chuck, ø8x30
836264 16Quick-change inserts WFB32-20W-T shrink fit chuck, ø10x25
836265 17Quick-change inserts WFB32-20W-T shrink fit chuck, ø12x11
836266 18Quick-change inserts WFB32-20W-T shrink fit chuck, ø12x30
Quick-change inserts WFB32-20 shrink-fit mounting
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-203
Catalog page
Quick-change inserts WFB32-20 shrink-fit mounting
836267 19Quick-change inserts WFB32-20W-T shrink fit chuck, ø10x252-piece type
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-204
Catalog page
Quick-change inserts WFB32-20 Weldon mounting
836270 22Quick-change inserts WFB32-20W-T Weldon DIN 1835 form B, ø6x27.5
836271 23Quick-change inserts WFB32-20W-T Weldon DIN 1835 form B, ø8x27.5
836272 24Quick-change inserts WFB32-20W-T Weldon DIN 1835 form B, ø10x25
836273 25Quick-change inserts WFB32-20W-T Weldon DIN 1835 form B, ø12x14.5
836274 26Quick-change inserts WFB32-20W-T Weldon DIN 1835 form B, ø12x35
836278 27Quick-change inserts WFB32-20W-T Weldon DIN 1835 form B, ø16x48Pendulum
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-205
Catalog page
Quick-change inserts WFB32-20 collet mounting
836280 30Quick-change inserts WFB32-20W-T collet, ER11
836281 31Quick-change inserts WFB32-20W-T collet, ER16
836282 32Quick-change inserts WFB32-20W-T collet, ER16
W9990298 33Quick-change inserts WFB32-20W-T collet, ER25
W9990478 34Quick-change inserts WFB32-20W-T collet, ER25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-206
Catalog page
Quick-change inserts WFB32-20 mill arbor mounting
836286 36Quick-change inserts WFB32-20W-T mill arbor, ø16
836287 37Quick-change inserts WFB32-20W-T mill arbor, ø22
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-207
Catalog page
Quick-change inserts WFB32-20 hydraulic expansion mounting
836290 40Quick-change inserts WFB32-20W-T hydraulic expansion mounting, ø6
836291 41Quick-change inserts WFB32-20W-T hydraulic expansion mounting, ø8
836292 42Quick-change inserts WFB32-20W-T hydraulic expansion mounting, ø10
836293 43Quick-change inserts WFB32-20W-T hydraulic expansion mounting, ø12
836294 44Quick-change inserts WFB32-20W-T hydraulic expansion mounting, ø16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-208
Catalog page
Quick-change inserts WFB32-20 other
W9990309 46Quick-change inserts WFB32-20W-T blanking plugs
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-209
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2010
Accessories
Quick-change inserts
WFB32-20
Shrink-fit mounting
WZ9990.3206F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2011
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø3x28
836260
ø50
37
28
ø3
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2012
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø4x28
836261
ø50
35
28
ø4
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2013
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø6x32
836262
36
32
ø6
ø50
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2014
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø8x30
836263
ø8
36
30
ø50
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2015
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø10x25
836264
ø10
40
25
ø50
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2016
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø12x11
836265
42
11
ø50
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2017
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø12x30
836266
ø12
30
42
ø50
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2018
Quick-change inserts WFB32-20
W-T shrink fit chuck, ø10x25
2-piece type
836267
ø50
ø10
40
25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2019
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2020
Accessories
Quick-change inserts
WFB32-20
Weldon mounting
WZ9990.3207F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2021
Quick-change inserts WFB32-20
W-T Weldon DIN 1835 form B, ø6x27.5
836270
27,5
36
ø6
18
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2022
Quick-change inserts WFB32-20
W-T Weldon DIN 1835 form B, ø8x27.5
836271
ø8
36
27,5
18
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2023
Quick-change inserts WFB32-20
W-T Weldon DIN 1835 form B, ø10x25
836272
20
ø10
40
25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2024
Quick-change inserts WFB32-20
W-T Weldon DIN 1835 form B, ø12x14.5
836273
14,5
ø12
39
19
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2025
Quick-change inserts WFB32-20
W-T Weldon DIN 1835 form B, ø12x35
836274
ø12
46
35
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2026
Quick-change inserts WFB32-20
W-T Weldon DIN 1835 form B, ø16x48
Pendulum
836278
ø16
48
24
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2027
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2028
Accessories
Quick-change inserts
WFB32-20
Collet mounting
WZ9990.3208F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2029
Quick-change inserts WFB32-20
W-T collet, ER11
836280
AccessoriesCollet ER11901930.0---
Tapping collet3239--, 900288
Clamping nut322438
Chuck key E11490219.0111
ER
11
36
25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2030
Quick-change inserts WFB32-20
W-T collet, ER16
836281
AccessoriesCollet ER16901930.1---
Collet ER16UPW99903--
Tapping collet3230--
Clamping nut901939.5161
Chuck key E16490219.3161
12,2
36
ER
16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2031
Quick-change inserts WFB32-20
W-T collet, ER16
836282
AccessoriesCollet ER16901930.1---
Collet ER16UPW99903--
Tapping collet3230--
Clamping nut901939.01
Chuck key E16490219.0161
ER
16
38,1
32,6
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2032
Quick-change inserts WFB32-20
W-T collet, ER25
W9990298
AccessoriesCollet ER25901930.3---
Tapping collet 3224--
Clamping nut901939.0251
Chuck key ER25490219.0251
max. 29
ø32
43
70 ø50
ER
25
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2033
Quick-change inserts WFB32-20
W-T collet, ER25
W9990478
max. 40,5
max. 81,5
ø20
ø30
ø42
ø50
0,5
ER
25
AccessoriesCollet ER25901930.3---
Tapping collet 3224--
Clamping nut901939.0251
Chuck key ER25490219.0251
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2034
Accessories
Quick-change inserts
WFB32-20
Mill arbor mounting
WZ9990.3209F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2035
Quick-change inserts WFB32-20
W-T mill arbor, ø16
836286
AccessoriesMill arbor wrench M8203020.1160
Rings 25139-.----
ø16
31
14
M8
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2036
Quick-change inserts WFB32-20
W-T mill arbor, ø22
836287
AccessoriesMill arbor wrench M10203020.1220
Rings 25139-.----
33
14
ø22
M10
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2037
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2038
Accessories
Quick-change inserts
WFB32-20
Hydraulic expansion mounting
WZ9990.3210F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2039
Quick-change inserts WFB32-20
W-T hydraulic expansion mounting, ø6
836290
ø6
47
37
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2040
Quick-change inserts WFB32-20
W-T hydraulic expansion mounting, ø8
836291
ø8
47
37
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2041
Quick-change inserts WFB32-20
W-T hydraulic expansion mounting, ø10
836292
51
41
ø10
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2042
Quick-change inserts WFB32-20
W-T hydraulic expansion mounting, ø12
836293
ø12
56
46
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2043
Quick-change inserts WFB32-20
W-T hydraulic expansion mounting, ø16
836294
59
ø16
49
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2044
Accessories
Quick-change inserts
WFB32-20
Miscell.
WZ9990.3299F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2045
Quick-change inserts WFB32-20
W-T blanking plugs
W9990309
10
ø50
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2046
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts WFB32-2047
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Quick-Change Inserts WFK20-12
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog pageW9990108 6Quick-change inserts WFK20-12W-T mill arbor, ø16
Quick-change inserts WFK20-12 mill arbor mounting
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-Change Inserts WFK20-123
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-Change Inserts WFK20-124
Accessories
Quick-change inserts
WFK20-12
WZ9990.9611F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-Change Inserts WFK20-125
ø31
s30
ø20
4
31
5
max. 51,5
M6
ø16
4,5max.13
ø12
Quick-change inserts WFK20-12
W-T mill arbor, ø16
W9990108
AccessoriesRings 251390.----
Rings 251391.----
Mill arbor wrench 203020.1160
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-Change Inserts WFK20-126
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-Change Inserts WFK20-127
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Quick-change inserts rear end machining unit D22, D24, D32, D42
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog pageW9990077 8Drill holding block, X Slide system —Tool mounting Ø8Cooling —Speed ratio —
W9990078 9Drill holding block, X Slide system —Tool mounting Ø12Cooling —Speed ratio —
W9990079 10Drill holding block, X Slide system —Tool mounting ER16Cooling —Speed ratio —
W9990304 11Blanking plugSlide system —Tool mounting —Cooling —Speed ratio —
Quick-change inserts rear end machining unit D22
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D423
Catalog page
Quick-change inserts rear end machining unit D24
W9990091 14Drill holding block, X Slide system —Tool mounting Ø12Cooling —Speed ratio —
W9990302 15Drill holding block, X Slide system —Tool mounting Ø16Cooling —Speed ratio —
W9990083 16Drill holding block, X Slide system —Tool mounting ER20Cooling —Speed ratio —
W9990305 17Blanking plugSlide system —Tool mounting —Cooling —Speed ratio —
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D424
Catalog page
Quick-change inserts rear end machining unit D32
W9990307 20Drill holding block, X Slide system —Tool mounting Ø16Cooling —Speed ratio —
W9990297 21Drill holding block, X Slide system —Tool mounting ER25Cooling —Speed ratio —
W9990306 22Blanking plugSlide system —Tool mounting —Cooling —Speed ratio —
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D425
Catalog page
Quick-change inserts rear end machining unit D42
W9990313 24Drill holding block, X Slide system —Tool mounting Ø25Cooling —Speed ratio —
W9990312 25Drill holding block, X Slide system —Tool mounting ER32Cooling —Speed ratio —
W9990311 26Blanking plugSlide system —Tool mounting —Cooling —Speed ratio —
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D426
Accessories
Quick-change inserts
Rear end machining unit, D22
WM9990.2200F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D427
W9990077
Drill holding block, X Slide system —Fixation Parallel pinTool mounting Ø8Cooling —Speed ratio —Dimensions (X/Y/Z) 13/—/— mm
ø22
27,5
38
ø8H7
1337
18
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D428
W9990078
Drill holding block, X Slide system —Fixation Parallel pinTool mounting Ø12Cooling —Speed ratio —Dimensions (X/Y/Z) 13/—/— mm
AccessoriesClamping sleeve D129093112.----
ø22
27,5
38
ø12H7
1337
18
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D429
W9990079
Drill holding block, X Slide system —Fixation Parallel pinTool mounting ER16Cooling —Speed ratio —Dimensions (X/Y/Z) 13/—/— mm
AccessoriesCollet ER16901930.1---
Collet ER16UPW99903--
Tapping collets3230--
Clamping nut901939.5161
Chuck key E16AX490219.3161
ø22
38
27,5
37
13
32
ER16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4210
W9990304
Blanking plugSlide system —Fixation —Tool mounting —Cooling —Speed ratio —Dimensions (X/Y/Z) 13/—/— mm
38
ø26
13
26
ø22
13,5 13,5
5
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4211
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4212
Accessories
Quick-change inserts
Rear end machining unit, D24
WM9990.2400F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4213
W9990091
Drill holding block, X Slide system —Fixation —Tool mounting Ø12Cooling —Speed ratio —Dimensions (X/Y/Z) 15/—/— mm
AccessoriesClamping sleeves993112.----
50
16,5 16,5ø12H7
ø24
47
1518
87,
5
19
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4214
W9990302
Drill holding block, X Slide system —Fixation —Tool mounting Ø16Cooling —Speed ratio —Dimensions (X/Y/Z) 15/—/— mm
50
16,5 16,5ø16H7
ø24
47
1518
87,
5
19
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4215
W9990083
Drill holding block, X Slide system —Fixation —Tool mounting ER20Cooling —Speed ratio —Dimensions (X/Y/Z) 15/—/— mm
AccessoriesCollet ER20901930.2---
Tapping collet3234--
Clamping nut M28x1.5901939.5201
Chuck key E20AX490219.3201
ø24
50
37,5
ER20
15
47
16,5 16,5
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4216
W9990305
Blanking plugSlide system —Fixation —Tool mounting —Cooling —Speed ratio —Dimensions (X/Y/Z) 15/—/— mm
50
ø32
15
ø24
16,5 16,5
5
7,5
28
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4217
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4218
Accessories
Quick-change inserts
Rear end machining unit, D32
WM9990.3200F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4219
W9990307
Drill holding block, X Slide system —Fixation —Tool mounting Ø16Cooling —Speed ratio —Dimensions (X/Y/Z) 18/—/— mm
AccessoriesMounting sleeveW67511.04--
50
21,5 21,5ø16H7
ø32
18
37
21
50
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4220
W9990297
Drill holding block, X Slide system —Fixation —Tool mounting ER25Cooling —Speed ratio —Dimensions (X/Y/Z) 16/—/— mm
AccessoriesCollet ER25901930.3---
Tapping collets3224--
Clamping nut M32x1.5901939.5251
Chuck key E25AX490219.3251
21
16
50
21,521,5
ø32
41
ER25
48
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4221
W9990306
Blanking plugSlide system —Fixation —Tool mounting —Cooling —Speed ratio —Dimensions (X/Y/Z) 16/—/— mm
50
ø40
16
ø32
21,5 21,5
5 29
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4222
Accessories
Quick-change inserts
Rear end machining unit, D42
WM9990.4200F
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4223
W9990313
Drill holding block, X Slide system —Fixation —Tool mounting Ø25Cooling —Speed ratio —Dimensions (X/Y/Z) 18/—/— mm
AccessoriesMounting sleeveW62221.41--
64
23,5 23,5ø25H7
ø42
56
18
46
27
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4224
W9990312
Drill holding block, X Slide system —Fixation —Tool mounting ER32Cooling —Speed ratio —Dimensions (X/Y/Z) 18/—/— mm
AccessoriesCollet ER32901930.6---
Tapping collet3242--
Clamping nut M40x1.5325950
Chuck key ER32325767
27
64
ER32
1856
23,5 23,5
48
ø42
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4225
W9990311
Blanking plugSlide system —Fixation —Tool mounting —Cooling —Speed ratio —Dimensions (X/Y/Z) 16/—/— mm
64
ø45
16
ø4241
23,5 23,5
5
38
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4226
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Quick-change inserts rear end machining unit D22, D24, D32, D4227
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 08.02.20130213/Rö
Tool holder accessories
Quick-change inserts INDEX TRAUB CAPTO C3
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2013
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2013
KatalogseiteW9990590 8Quick-Change Inserts CAPTO C3collet, ER16
W9990591 9Quick-Change Inserts CAPTO C3collet, ER20
W9990645 10Quick-Change Inserts CAPTO C3collet, ER25
Quick-change inserts CAPTO C3 collet mounting
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C33
Katalogseite
Quick-change inserts CAPTO C3 Weldon mounting
W9990592 11Quick-Change Inserts CAPTO C3Weldon DIN 1835 B/E, ø8
W9990593 12Quick-Change Inserts CAPTO C3Weldon DIN 1835 B/E, ø10
W9990594 13Quick-Change Inserts CAPTO C3Weldon DIN 1835 B/E, ø12
W9990595 14Quick-Change Inserts CAPTO C3Weldon DIN 1835 B/E, ø16
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C34
Katalogseite
Quick-change inserts CAPTO C3 mill arbor mounting
W9990596 15Quick-Change Inserts CAPTO C3mill arbor, ø22
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C35
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C36
WZ9990.3000F
Accessories
Quick-change inserts
INDEX TRAUB CAPTO C3
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C37
Quick-Change Inserts CAPTO C3
collet, ER16
W9990590
AccessoriesCollet 901930.1---
Collet W99903--
Tapping tool collet 3230--
Tapping tool collet WZ9990.9507F
Collet chuck W999065-
Clamping nut 901939.01
Chuck key 490219.0161ø3
2
49,1
30,1 CAPTO C3
ER
16
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C38
Quick-Change Inserts CAPTO C3
collet, ER20
W9990591
AccessoriesCollet 901930.2---
Tapping tool collet 3234--
Collet chuck W999066-
Clamping nut 901939.0201
Chuck key 490219.0201
ø32
54
35 CAPTO C3
ER
20
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C39
Quick-Change Inserts CAPTO C3
collet, ER25
W9990645
AccessoriesCollet 901930.3---
Tapping tool collet 3224--
Tapping tool collet WZ9990.9507F
Collet chuck W999067-
Clamping nut 901939.0251
Chuck key 490219.0251
63
ø32
ER
25
44CAPTO C3
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C310
Quick-Change Inserts CAPTO C3
Weldon DIN 1835 B/E, ø8
W9990592
ø32
52
33 CAPTO C3
ø8
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C311
Quick-Change Inserts CAPTO C3
Weldon DIN 1835 B/E, ø10
W9990593
ø32
56
37 CAPTO C3
ø10
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C312
Quick-Change Inserts CAPTO C3
Weldon DIN 1835 B/E, ø12
W9990594
ø32
61
42 CAPTO C3
ø12
AccessoriesMounting Sleeve ø12h6 W94280.21--
Clamping Sleeves 9931--.----
Thrust blocks 9938--.----
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C313
Quick-Change Inserts CAPTO C3
Weldon DIN 1835 B/E, ø16
W9990595
ø32
70
51 CAPTO C3
ø16
AccessoriesMounting Sleeve ø16h6 W67511.04--
Clamping Sleeve W95280.215-
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C314
Quick-Change Inserts CAPTO C3
mill arbor, ø22
W9990596
ø32
64
36 CAPTO C3
ø22
AccessoriesCutter tightening screw M10 250122.1028
Mill Arbor Wrench 203020.1220
For more information see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C315
TRAUB-DrehmaschinenGmbH & Co. KGHauffstraße 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALEPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Straße 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALEPhone +49 (0) 711 3191-600Fax +49 (0) 711 [email protected]
LY1002.10341 - 08.02.20130213/Rö
Tool holder accessories
Quick-change inserts INDEX TRAUB CAPTO C4
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2013
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2013
KatalogseiteW9990710 8Quick-Change Inserts CAPTO C4collet, ER20
W9990711 9Quick-Change Inserts CAPTO C4collet, ER25
W9990712 10Quick-Change Inserts CAPTO C4collet, ER32
Quick-change inserts CAPTO C4 collet mounting
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C43For more information see http://infoshop.index-werke.de/
Katalogseite
Quick-change inserts CAPTO C4 Weldon mounting
W9990773 11Quick-Change Inserts CAPTO C4Weldon DIN 1835 B/E, ø6
W9990713 12Quick-Change Inserts CAPTO C4Weldon DIN 1835 B/E, ø8
W9990714 13Quick-Change Inserts CAPTO C4Weldon DIN 1835 B/E, ø10
W9990715 14Quick-Change Inserts CAPTO C4Weldon DIN 1835 B/E, ø12
W9990716 15Quick-Change Inserts CAPTO C4Weldon DIN 1835 B/E, ø16
W9990717 16Quick-Change Inserts CAPTO C4Weldon DIN 1835 B/E, ø20
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C44For more information see http://infoshop.index-werke.de/
Katalogseite
Quick-change inserts CAPTO C4 mill arbor mounting
W9990718 17Quick-Change Inserts CAPTO C4mill arbor, ø22
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C45For more information see http://infoshop.index-werke.de/
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C46For more information see http://infoshop.index-werke.de/
WZ9990.4000F
Accessories
Quick-change inserts
INDEX TRAUB CAPTO C4
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C47For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
collet, ER20
W9990710
AccessoriesCollet 901930.2---
Tapping tool collet 3234--
Collet chuck W999066-
Clamping nut 901939.0201
Chuck key 490219.0201
ER
20
32 CAPTO C4
56
40
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C48For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
collet, ER25
W9990711
35 CAPTO C4
ø40
ER
25
59
AccessoriesCollet 901930.3---
Tapping tool collet 3224--
Tapping tool collet WZ9990.9507F
Collet chuck W999067-
Clamping nut 901939.0251
Chuck key 490219.0251
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C49For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
collet, ER32
W9990712
35 CAPTO C4
ø40
ER
25
59
AccessoriesCollet 901930.6---
Tapping tool collet 3242--
Tapping tool collet WZ9990.9509F
Collet chuck W999068-
Clamping nut 901939.0321
Chuck key 490219.0321
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C410For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
Weldon DIN 1835 B/E, ø6
W9990773
ø40
ø6
54
30 CAPTO C4
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C411For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
Weldon DIN 1835 B/E, ø8
W9990713
ø40
54
30 CAPTO C4
ø8
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C412For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
Weldon DIN 1835 B/E, ø10
W9990714
ø40ø1
0
34 CAPTO C4
58
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C413For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
Weldon DIN 1835 B/E, ø12
W9990715
ø12
ø40
39 CAPTO C4
63
AccessoriesMounting Sleeve ø12h6 W94280.21--
Clamping Sleeves 9931--.----
Thrust blocks 9938--.----
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C414For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
Weldon DIN 1835 B/E, ø16
W9990716
ø40
ø16
67
43 CAPTO C4
AccessoriesMounting Sleeve ø16h6 W67511.04--
Clamping Sleeve W95280.215-
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C415For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
Weldon DIN 1835 B/E, ø20
W9990717
AccessoriesMounting Sleeve ø20 W68510.04--
Clamping Sleeve 993120.----
ø40
ø20
45 CAPTO C4
69
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C416For more information see http://infoshop.index-werke.de/
Quick-Change Inserts CAPTO C4
mill arbor, ø22
W9990718
ø40
ø22
35 CAPTO C4
59
AccessoriesCutter tightening screw M10 250122.1028
Mill Arbor Wrench 203020.1220
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C417For more information see http://infoshop.index-werke.de/
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C418For more information see http://infoshop.index-werke.de/
Tool holder accessories
LY1002.10341 - 08.02.2013
Quick-change inserts INDEX TRAUB CAPTO C419For more information see http://infoshop.index-werke.de/
TRAUB-DrehmaschinenGmbH & Co. KGHauffstraße 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALEPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Straße 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALEPhone +49 (0) 711 3191-600Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Tool holders with parallel shank
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog pageW9990164 4Center
W64451.1050 5Tapping insert
W42042.00 6Bar stop, rotating
Tool holders with parallel shank
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Tool holders with parallel shank3
W9990164
10,5
89,5
30,5
ø32g
6
ø40
60°
s22
7 30
Center
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Tool holders with parallel shank4
42-44 26 6
5
ø16h
6
ø28
28s2
5
Tapping insert
Clamping range ø0.5-ø10for threads up to M12
W64451.1050
AccessoriesCollet ER16901930.1---
Clamping nut M22x1.5901939.01
Chuck key E16490219.0161
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Tool holders with parallel shank5
Bar stop, rotating
W42042.00
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Tool holders with parallel shank6
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Tool holders with parallel shank7
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Cutting tools
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog pageW9990300 6Marking toolShank diameter D12
W9990301 7Marking toolShank diameter D20
223010.50-- 8Metal circular saw blade
223010.63-- 9Metal circular saw blade
223011.80-- 10Metal circular saw blade
223015.20-- 11Circular saw blade
223015.25-- 12Circular saw blade
Cutting tools
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools3
Catalog page
Cutting tools
W63380.00-- 13Embossing roller
W89111.1280 14Knurling tool holder
W89111.1290 15Knurling tool holder
22191-.21-- 16Knurling wheels
W37606.---- 17Slotting tool for hexagon socket
AZ4013.00 18Cutting edge holderConnecting dimensions
AZ4091.00 19Drawing for broaching bladesWorkpiece outside profile, max. broaching diameter 30 mm
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools4
Catalog page
Cutting tools
901328 20Saw Blade Drawing
900884 21Whirl Head Drawing
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools5
Marking tool
Shank diameter D12
W9990300
72,4
55
49,3
s10
7,4
ø12
ø3
ø12,2
24°
A
A-A
A
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools6
Marking tool
Shank diameter D20
W9990301
A
A-A
A
s16
ø20
44°
ø310
,396
,3
ø20,2
71
65
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools7
Metal circular saw blade
223010.50--
B
D
B1
D2
D1H
7
H
Part number No. of teeth D D1H7 D2 B B1 H223010.5003 128 50 13 25 0.3 3 14.6
223010.5004 100 50 13 25 0.4 3 14.6
223010.5008 80 50 13 25 0.8 3 14.6
223010.5010 80 50 13 25 1.0 3 14.6
223010.5012 80 50 13 25 1.2 3 14.6
223010.5016 64 50 13 25 1.6 3 14.6
223010.5020 64 50 13 25 2.0 3 14.6
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools8
B
D
B1
D2
D1H
7
H
Metal circular saw blade
223010.63--
Part number No. of teeth D D1H7 D2 B B1 H223010.6304 128 63 16 32 0.4 4 17.7
223010.6305 128 63 16 32 0.5 4 17.7
223010.6306 100 63 16 32 0.6 4 17.7
223010.6308 100 63 16 32 0.8 4 17.7
223010.6310 100 63 16 32 1.0 4 17.7
223010.6312 80 63 16 32 1.2 4 17.7
223010.6316 80 63 16 32 1.6 4 17.7
223010.6320 80 63 16 32 2.0 4 17.7
223010.6325 64 63 16 32 2.5 4 17.7
223010.6330 64 63 16 32 3.0 4 17.7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools9
B
D
B1
D2
D1H
7
H
Metal circular saw blade
223011.80--
Part number No. of teeth D D1H7 D2 B B1 H223011.8006 128 80 16 32 0.6 4 17.7
223011.8008 128 80 16 32 0.8 4 17.7
223011.8010 100 80 16 32 1.0 4 17.7
223011.8012 100 80 16 32 1.2 4 17.7
223011.8016 100 80 16 32 1.6 4 17.7
223011.8020 80 80 16 32 2.0 4 17.7
223011.8025 80 80 16 32 2.5 4 17.7
223011.8030 80 80 16 32 3.0 4 17.7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools10
Circular saw blade
223015.20--
Part number No. of teeth D D1H7 D2 B B1 H223015.2020 48 100 22 40 2 6 24.1
223015.2030 40 100 22 40 3 6 24.1
223015.2040 40 100 22 40 4 6 24.1
B
D
B1
D2
D1H
7
H
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools11
B
D
Circular saw blade
223015.25--
Part number D D1H7 D2 B B1 H223015.2516 125 22 40 1.6 6 24.1
223015.2520 125 22 40 2.0 6 24.1
223015.2540 125 22 40 4.0 6 24.1
223015.2550 125 22 40 5.0 6 24.1
223015.2560 125 22 40 6.0 6 24.1
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools12
Embossing roller
W63380.00--
20
D8 6
Part number DW63380.0030 50
W63380.0060 60
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools13
7152
720
6 8 20
5
ø6H7
Knurling tool holder
W89111.1280
AccessoriesKnurling wheels22191-.21--
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools14
Knurling tool holder
W89111.1290
AccessoriesKnurling wheels22191-.21--
1313
20
76 20
82
20
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools15
D 20D2 6B1 6B2 5
Description t=indexing pitch Part number
Knurling wheelForm AA
even
0.5 221911.21050.6 221911.21060.8 221911.21081.0 221911.21101.2 221911.21121.5 221911.2115
Knurling wheelForm BL
left-hand twist45°
0.5 —0.6 —0.8 —1.0 —1.2 —1.5 —
Knurling wheelForm BR
right-hand twist45°
0.5 —0.6 —0.8 221913.21081.0 —1.2 —1.5 —
Knurling wheelForm GE
left-hand twistright-hand twistpeaks elevated
45°
0.5 221914.21050.6 221914.21060.8 221914.21081.0 —1.2 —1.5 —
Knurling wheelForm GV
left-hand twistright-hand twistpeaks recessed
45°
0.5 —0.6 —0.8 —1.0 —1.2 —1.5 —
B
B1
DD2
t
D1
Knurling wheels
22191-.21--
During knurling the external diameter becomes 1/2 t larger than D1
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools16
18 22 s
ø12h
6
Slotting tool for hexagon socket
W37606.----
Part number s
W37606.0200 2.0
W37606.0250 2.5
W37606.0300 3.0
W37606.0400 4.0
W37606.0500 5.0
W37606.0600 6.0
W37606.0700 7.0
W37606.0800 8.0
W37606.0900 9.0
W37606.1000 10.0
W37606.1100 11.0
W37606.1200 12.0
W37606.1400 14.0
W37606.1700 17.0
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools17
Cutting edge holder
Connecting dimensions
AZ4013.00
ø25H7
ø80
ø58,6
53°
2,5
4
6H7
M8
14
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools18
Drawing for broaching blades
Workpiece outside profile, max. broaching diameter 30 mm
AZ4091.00
13
36°
ø36
ø40
8
5
2,05
34,4
2°
Workpiece-related inside contour
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools19
Saw Blade Drawing
901328
ø3F8 max.2
13,5
±0,
05
ø 12
5
ø22H
7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools20
A
A
()
x45°
x45°
( )
( x45°)
()
A
0,20,003
0,02
6x
5:1Z
Z40
80
40
40
80
40
120
80 825 58
0,5
0,54,5
6
5,5
0,7
4041
4M
9
15,5
4,5
4,4
0,8
0,8
0,8
0,8
4,5
15
0,5
1 5
0,6
0,6R
47,5
0 -0,1
-0,0
03-0
,011
+0,1 0
0,001
0
-0,5
0,1
13,52
Whirl Head DrawingMounting screws are included with the whirl head
900884
Cut-in as chosen by the manufacturer
Swivel axis = profilecenter of knife = for whirl equipment without Y-compensation
Swivel axis
max.Threadlength
Division of the plate seat acc. to drill pattern as cho-sen by the manufacturer
Form A
Form A
Form B
for tiny threadsY-compensation required
Form B
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools21
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools22
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Cutting tools23
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Presetting units
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog page
Presetting units
W9990173 6Adjusting gauge for V-gib
W67941.1200 7Adjusting Gauge
W9990174 8Checking gauge for centering plate
W1150008 9AdapterVDI20
W9990054 10AdapterVDI25
W68940.1070 11AdapterVDI30
W64940.1070 12AdapterVDI40
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units3
Catalog page
Presetting units
W9990363 13Adapterfor SK50 / VDI20W-serration
W9990257 14Adapterfor SK50 / VDI25W-serration
W9990190 15Preadjustment block
W9990191 16Mountingfor VDI20
W9990192 17Mountingfor VDI25
W9990193 18Mountingfor VDI30
W9990194 19Mountingfor VDI40
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units4
Catalog page
Presetting units
W9990497 20Mountingfor HSK 40 A/T
W9990498 21Mountingfor HSK 50 A/T
W9990499 22Mountingfor HSK 63 A/T
W9990195 23Exchange adapterfor TRAUB TNL 18P , TRAUB TNL 18
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units5
190
80 28,5
99,5
132
75
97
30 30
64 64
7553,5VDI25
Adjusting gauge for V-gib
W9990173
Mounting of V-gib on tool holder with adjusting gauge W9990173:
To mount the V-gib, loosely clamp the respective tool holder in the adjusting gauge W9990173 and align it horizontally (±0.01 / 100 mm). Then tighten the holder and re-check the horizontal alignment. Loosely attach the tool holder to the V-gib with screws so that the slider presses the V-gib with spring pressure against the slightly convex surfaces of the centering plate. First tighten the two mounting screws of the V-gib only slightly to prevent the V-gib from slipping out of position, and then fully tighten them. Do not fix the V-gibs to the tool holders with pins to allow readjustment as necessary.
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units6
96,9 74
,9132
64 64
76 53
190
27,5
111,5
80 VDI25
Mounting of V-gib on tool holder with adjusting gauge W67941.1200:
To mount the V-gib, loosely clamp the respective tool holder in the adjusting gauge W67941.1200 and align it horizontally (±0.01 / 100 mm). Then tighten the holder and re-check the horizontal alignment. Loosely attach the tool holder to the V-gib with screws so that the slider presses the V-gib with spring pressure against the slightly convex surfaces of the centering plate. First tighten the two mounting screws of the V-gib only slightly to prevent the V-gib from slipping out of position, and then fully tighten them. Do not fix the V-gibs to the tool holders with pins to allow readjustment as necessary.
Adjusting Gauge
W67941.1200
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units7
86 86
30 30 ø25h6
30 30
70
ø40
Checking gauge for centering plate
W9990174
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units8
Adapter
VDI20W-serration
W1150008
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units9
Adapter
VDI25W-serration
W9990054
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units10
Adapter
VDI30W-serration
W68940.1070
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units11
Adapter
VDI40W-serration
W64940.1070
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units12
105
41,8
ø97,5
ø20H6
41,6
31,8
SK50
Adapter
for SK50 / VDI20W-serration
W9990363
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units13
SK50
ø25H6ø115
88,6
132
36,4
Adapter
for SK50 / VDI25W-serration
W9990257
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units14
240 240
240
ca. 4
0
0
Product InformationPreadjustment block W9800003ENModule TRAUB TNL 18 W9800006EN
W9990190
ModulesVDI20 W9990191VDI25 W9990192VDI30 W9990193VDI40 W9990194
HSK 40 W9990497HSK 50 W9990498HSK 63 W9990499
TRAUB TNL 18P W9990195TRAUB TNL 18 W9990195
Preadjustment block
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units15
Mounting
for VDI20
W9990191
50
112,
6
3535
2626
3550
ø20H6
6412
30 35
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units16
3650 35 35
34 36
30 30 8
6410
ø25H611
7,6
55
Mounting
for VDI25
W9990192
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units17
8 35 35 50 50
64
122,
6
ø30H6
80
W9990193
Mounting
for VDI30
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units18
1140,5 40,550 50
64
ø40H613
2,6
88
Mounting
for VDI40
W9990194
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units19
W9990497
Mounting
for HSK 40 A/T
ø58
ø85
HSK 40A/Tø70
144,
2
40,2
(104
)
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units20
W9990498
Mounting
for HSK 50 A/T
ø58
ø85
ø80
155,
6
51,6
(104
)
HSK 50 A/T
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units21
W9990499
Mounting
for HSK 63 A/T
(64)
40
ø82,5
104
ø58
ø85
HSK 63 A/T
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units22
ø58100
ø36
ø45
104
168
90
170
R50
25 2520
10 1515 020
55 10
Exchange adapter
for TRAUB TNL 18P , TRAUB TNL 18
W9990195
Product InformationPreadjustment block W9800003ENExchange adapter TRAUB TNL 18 W9800006EN
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Presetting units23
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Polygon turning
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog page498199.0101 4Adapter
223800.2401 5Presetting unit for cutter headMounting D27
W9990303 6Presetting unit for cutter headMounting HSK 32E
223800.2301 7Base bodyMounting D27
W9990296 8Base bodywith mounting HSK 32E
W9990294 9Tool holdersCassette, right
W9990295 10Tool holdersCassette, left
Polygon turning
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning3
5,5167
4,5
ø19
ø42
Adapter
498199.0101
AccessoriesBase body223800.2301
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning4
Presetting unit for cutter head
Mounting D27with calibration ring and dial gauge
223800.2401
The presetting unit 223800.2401 is used to set all cutting edges on a cutter head precisely to the same diameter.
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning5
Presetting unit for cutter head
Mounting HSK 32Ewith calibration ring and dial gauge
W9990303
The presetting unit W9990303 is used to set all cutting edges on a cutter head precisely to the same diameter.
22
ø39h6
ø90
ø120
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning6
ø90
16
ø27H
5
Base body
Mounting D27
223800.2301
AccessoriesTool holdersW9990294 cassette, rightW9990295 cassette, left
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning7
Base body
with mounting HSK 32E
W9990296
s1916
ø90
DIN 69893HSK-32E
23,5
AccessoriesTool holdersW9990294 cassette, rightW9990295 cassette, left
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning8
Tool holders
Cassette, right
W9990294
12
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning9
Tool holders
Cassette, left
W9990295
12
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning10
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Polygon turning11
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]
LY1002.10341 - 04.05.20110511/Rö
Tool holder accessories
Other accessories
Abbreviations used in the catalog:
EC = external cooling lubricant supplyapprox. = approximatelyD = diametermax. = maximummin = minimumIC = internal cooling lubricant supplyMK = Morse taperR = radiuss = width across flatsSK = steep angle taperVkt = square
Disclaimer
The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.
A Word on Copyright
This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation.
© Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011
© Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011
Catalog page251390.---- 12Rings
251391.---- 13Rings
Accessories, drivers for mill arbor rings
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories3
Catalog pageW94280.23-- 14Centers
W94280.23-- 15Centers
W9636-.21-- 16Center
W9636-.21-- 17Center
W13622.16 18Center
W33621.16 19Center
Accessories, centers
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories4
Catalog pageW67451.00-- 20Driver for tapping tool holder
W68450.00-- 21Driver for tapping tool holder
W63340.46-- 22Driver for tapping tool holder
Accessories, drivers for tapping tool holders
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories5
Catalog page
Accessories, cutter tightening bolt
250122.---- 23Cutter tightening bolt
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories6
Catalog page
Accessories, cooling lubricant pipe
W67500.3206 24Cooling lubricant pipe
W9990047 25Cooling lubricant pipe
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories7
Catalog page
Accessories, cooling lubricant delivery set
WS7-00.0020 26Cooling lubricant delivery setfor HSK
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories8
Catalog page
Accessories, socket wrench
WS7-00.0010 27Socket wrenchfor coolant delivery set, HSK
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories9
Catalog page
Accessories, compensation angle
WK1110.16 28Angle
W63300.00-- 29Mounting bracket
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories10
Catalog page
Accessories, compensation plate
W94060.4806 30Compensation plate
W9990082 31Compensation plate
W64302.1606 32Compensation plate
W64302.1006 33Compensation plate
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories11
Rings
251390.----
Part number D D1 B B1 T
981158 ø10 ø15 0.1 3 11.4
981159 ø10 ø15 0.3 3 11.4
981160 ø10 ø15 0.5 3 11.4
251390.1310 ø13 ø21 0.1 3 14.7
251390.1330 ø13 ø21 0.3 3 14.7
251390.1350 ø13 ø21 0.5 3 14.7
251391.1301 ø13 ø21 1.0 3 14.7
322525 ø16 ø25 0.05 4 17.8
251390.1610 ø16 ø25 0.1 4 17.8
251390.1630 ø16 ø25 0.3 4 17.8
251390.1650 ø16 ø25 0.5 4 17.8
251391.1601 ø16 ø25 1.0 4 17.8
319230 ø22 ø33 0.05 6 24.3
251390.2210 ø22 ø33 0.1 6 24.3
251390.2230 ø22 ø33 0.3 6 24.3
251391.2201 ø22 ø33 1.0 6 24.3
321251 ø32 ø45 0.05 8 35.1
321252 ø32 ø45 0.1 8 35.1
321253 ø32 ø45 1.0 8 35.1
D1
D B
B1
T
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories12
Rings
251391.----
Part number D D1 B B1 T
251391.0801 ø8 ø14 1 2 9
251391.0803 ø8 ø14 3 2 9
251391.0805 ø8 ø14 5 2 9
981161 ø10 ø16 1 3 11.4
981162 ø10 ø16 3 3 11.4
981163 ø10 ø16 5 3 11.4
251391.1303 ø13 ø22 3 3 14.7
251391.1305 ø13 ø22 5 3 14.7
322528 ø16 ø27 2 4 17.8
251391.1603 ø16 ø27 3 4 17.8
251391.1605 ø16 ø27 5 4 17.8
322530 ø16 ø27 6 4 17.8
322531 ø16 ø27 10 4 17.8
319233 ø22 ø34 2 6 24.3
251391.2203 ø22 ø34 3 6 24.3
319234 ø22 ø34 4 6 24.3
251391.2205 ø22 ø34 5 6 24.3
319235 ø22 ø34 6 6 24.3
319236 ø22 ø34 10 6 24.3
321254 ø32 ø47 2 8 35.1
321255 ø32 ø47 3 8 35.1
321256 ø32 ø47 6 8 35.1
321257 ø32 ø47 10 8 35.1
321258 ø32 ø47 20 8 35.1
D1
D B
B1
T
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories13
Centers
W94280.23--
Part numberW94280.2310
Part numberW94280.2330
Part numberW94280.2340
Part numberW94280.2350
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories14
Centers
W94280.23--
Part numberW94280.2365
Part numberW94280.2370
Part numberW94280.2380
Part numberW94280.2390
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories15
Center
W9636-.21--
Part numberW96362.2110 L=23W96363.2110 L=30
Part numberW96362.2120
Part numberW96363.2120
Part numberW96362.2130
Part numberW96362.2140
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories16
Center
W9636-.21--
Part numberW96362.2150
Part numberW96362.2160
Part numberW96362.2170
Part numberW96362.2180
Part numberW96362.2190
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories17
38
4 20
60°
ø16,
2 ø9,0
45M
K0
Center
W13622.16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories18
60°
ø20,
2
50
284,5
ø12,
07 M
K1
Center
W33621.16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories19
10 5
s
4,2
ø13
3
Driver for tapping tool holder
W67451.00--
Part number s
W67451.0075 Driver set4.9-7
W67451.0049 4.9
W67451.0055 5.5
W67451.0062 6.2
W67451.0070 7
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories20
15
7,3
s
5,2
ø17,6
Driver for tapping tool holder
W68450.00--
Part number s
W68450.0095 Driver set4.9-9
W68450.0049 4.9
W68450.0055 5.5
W68450.0062 6.2
W68450.0070 7
W68450.0080 8
W68450.0090 9
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories21
X
s14
= 1
3,9-
0,2
ø19
Driver for tapping tool holder
W63340.46--
Part number X for M
W63340.4636 s 4.9 M8
W63340.4634 s 5.5 M9-M10
W63340.4632 s 6.2 M11
W63340.4628 s 7 M12
W63340.4638 s 8 M10
W63340.4626 s 9 M14-M16
W63340.4624 s 11 M18
W63340.4622 s 12 M20
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories22
Cutter tightening bolt
250122.----
L
dD
Milling shaft Part number D d L
ø13 250122.0617 ø17 M6 17
ø16 250122.0820 ø20 M8 22
ø22 250122.1028 ø28 M10 25
ø27 250122.1235 ø35 M12 30
ø32 250122.1642 ø42 M16 35
ø40 250122.2052 ø52 M20 40
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories23
Cooling lubricant pipe
W67500.3206
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories24
ø3M6
85
6
Cooling lubricant pipe
W9990047
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories25
L
d
D
Cooling lubricant delivery set
for HSK
WS7-00.0020
Part number D d L Tool holder systemWS7400.0020 M12x1 ø8 29.5 for cooling lubricant delivery set, HSK 40 A/CWS7600.0020 M16x1 ø10 33 for cooling lubricant delivery set, HSK 50 CWS7800.0020 M18x1 ø12 36.5 for cooling lubricant delivery set, HSK 60 A/C
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories26
D
L
Socket wrench
for coolant delivery set, HSK
WS7-00.0010
Part number D L Tool holder systemWS7400.0010 ø10.5 112 for cooling lubricant delivery set, HSK 40 A/CWS7600.0010 ø14.5 117 for cooling lubricant delivery set, HSK 50 CWS7800.0010 ø16.5 122 for cooling lubricant delivery set, HSK 60 A/C
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories27
20
19
4424,5 35
10
26 32
10,2
84
Angle
WK1110.16
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories28
56 19,5
B
19,5
H
Mounting bracket
W63300.00--
Part number H B
W63300.0010 8 8
W63300.0020 4 4
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories29
14
65
4
M4
Compensation plate
W94060.4806
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories30
19
75
4
M4
Compensation plate
W9990082
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories31
Compensation plate
W64302.1606
85
225
ø5H12
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories32
Compensation plate
W64302.1006
85
257
ø8H12
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories33
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories34
For more information, see http://infoshop.index-werke.de/Tool holder accessories
LY1002.10341 - 04.05.2011
Other accessories35
TRAUB-DrehmaschinenGmbH & Co. KGHauffstrasse 4 D-73262 Reichenbach, Germanywww.traub.de
TECHNICAL ADVICEPhone +49 (0) 7153 502-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 7153 502-600Fax +49 (0) 7153 [email protected]
INDEX-Werke GmbH & Co. KGHahn & TesskyPlochinger Strasse 92D-73730 Esslingen, Germanywww.index-werke.de
TECHNICAL ADVICEPhone +49 (0) 711 3191-9854Fax +49 (0) 711 [email protected]
SPARE PARTS SALESPhone +49 (0) 711 3191-260Fax +49 (0) 711 [email protected]