1

TOLLE MOTORCYCLE PRODUCTS

CATALOG 2008

M A D E I N S W E D E N

2

14,19-1 Adjustable triple trees alu unpol. 195mm 14,19-2 Adjustable triple trees alu pol. 195mm 14,22-1 Adjustable triple trees alu unpol. 220mm 14,22-2 Adjustable triple trees alu pol. 220mm 14,25-1 Adjustable triple trees alu unpol.250mm 14,25-2 Adjustable triple trees alu pol. 250mm To fit 41,26mm diameter tubes – The lower triple tree is drilled to receive fork stop.Adjustable from 0 to 17° thanks toan internal spacer system hidden in the lower tree and adjustable fork tube plugs

3

NEW !!! Adjustable triple trees by Tolle

Twentytwo years have passed since Tolle patented the first and famous adjustable triple tree available on the Chopper market in 1986.

Tolle Scandinavian Motorcycles now launches these new adjustable triple trees featuring 250mm wide and made to fit 41,2mm diameter tubes. They are machined in massive aluminium and polished to a mirror finish.

The NEW!!! thing is that the upper tree now looks like any other upper tree in Tolle's range but it is adjustable. The former visible fork tube plugs bolted on sides so often complained about by many customers have now disappeared.

The fork tubes, thanks to an ingenious system located in the upper tree, rake between 2° and 7°. This system fits short, medium or long fork tubes lenght caring about the 'trail' you thus give to your bike to keep a safe and easy handling.

Tolle now offers to the long fork Choppers addicts his solution that brings as much design as function.

14,27-1 Adjustable triple trees 3Gen Smooth alu unpol.250mm 14,27-2 Adjustable triple trees 3Gen Smooth alu pol. 250mm

14,27T-1 Adjustable triple trees 3Gen Teardrop alu unpol.250mm 14,27T-2 Adjustable triple trees 3Gen Teardrop alu pol. 250mm

4

15, ?ND-2 Triple tree al. pol. 250mm 3,4,5,6 or 7° with hidden fork tube plugs

15, ?FS-2 Triple trees al. pol. 250mm 3,4,5,6 or 7° with visble fork tube plugs

15, ?FD-2 Triple trees al. pol. 250mm 3,4,5,6

16,3M-1 Kit triple tree 220mm rake 3° 88-up 16,3M-2 Kit triple tree 220mm rake 3° 88-up 16,5M-1 Kit triple tree 220mm rake 5° 88-up 16,5M-2 Kit triple tree 220mm rake 5° 88-up

Note : ForFX-XL 39mm tube diameter

15, ?NS-2 Triple tree al. pol. 250mm 3,4,5,6 or 7° with visible fork tube plugs

5

12, #-1 Fork with 3,4,5,6 or 7° rake al. unpolished 12, #-2 Fork with 3,4,5,6 or 7° rake al. polished

Note : Comes complete with trees, tubes and sliders, front axle, front fender mounts. Lenght up to +45’’ (See Tolle table)

11,3-1 Fork cpte adjustable from 2° to 7° al. unpolished

Lenght up to +45" (See Tolle table)

Note : Comes complete with trees, tubes and sliders, front axle, front fender mounts.

11,3-2 Fork cpte adjustable from 2° to 7° al. polished

Lenght up to +45" (See Tolle table)

Note : Comes complete with trees, tubes and sliders, front axle, front fender mounts.

6

18,0-1 Tolle tubes and sliders 41.26mm alu pol. Smooth design sliders 18,0-2 Tolle tubes and sliders 41.26mm alu Smooth design sliders 18,1-1 Tolle tubes and sliders 41.26mm alu Classic design sliders 18,1-2 Tolle tubes and sliders 41.26mm alu pol. Classic design sliders 18,2-1 Tolle tubes and sliders 41.26mm alu Hi-tech design sliders 18,2-2 Tolle tuebs and sliders 41.26mm alu pol. Hi-tech design sliders

Note : Come complete ready to mount

19,70-1 Tolle sliders 39mm al. Smooth 19,70-2 Tolle sliders 39mm al. polished Smooth 19,71-1 Tolle sliders 39mm al. Classic 19,71-2 Tolle sliders 39mm al. polished Classic 19,72-1 Tolle sliders 39mm al. HiTech 19,72-2 Tolle sliders 39mm al. polished HiTech

19,50-1 Tolle sliders 41.26mm al. Smooth 19,50-2 Tolle sliders 41.26mm al. polished Smooth 19,51-1 Tolle sliders 41.26mm al. Classic 19,51-2 Tolle sliders 41.26mm al. polished Classic 19,52-1 Tolle sliders 41.26mm al. HiTech 19,52-2 Tolle sliders 41.26mm al. polished HiTech

7

26,3-1 Tweek bar alu. 3 pieces

26,3-2 Tweek bar alu. pol. 3 pièces

26,1-1 Tweek bar alu. 1 piece

26,1-2 Tweek bar alu. pol 1 piece

27,00-7 Front wheel axle hidden ¾’’

With spacers for 250mm triple trees

8

82,2-7 Stainless steel internal fork stop

Fits frames with separate bearing headcups

101,40-2 Concave cover alu. with seal for Tolle sliders 95-up and 41,2 tubes (pair)

101,42-2 Convex cover alu. with seals for Tolle sliders 95-up and 41,2 tubes (pair)

119,07-2 Original design pinch cap for sliders

119,08-2 Bullet design pinch cap for sliders

42,25-2 Cable bracket al. pol. on frame and bar 1’’

42,28-2 Cable bracket al. pol. on frame 28mm

42,30-2 Cable bracket al. pol. on frame 30mm

42,35-2 Cable bracket al. pol. on frame & fork tube 35mm

42,39-2 Cable bracket al. pol. on fork tube 39mm

42,41-2 Cable bracket al. pol. on fork tube 41,2mm

9

Extension Upper leg Total fork length

Artnr 11,0 inch mm

fork tubes mm inch

0 517 20,4 692 27,21 542 21,4 717 28,22 568 22,4 743 29,23 593 23,4 768 30,24 619 24,4 794 31,25 644 25,4 819 32,26 669 26,4 844 33,27 695 27,4 870 34,28 720 28,4 895 35,29 746 29,4 921 36,2

10 771 30,4 946 37,211 796 31,4 971 38,212 822 32,4 997 39,213 847 33,4 1022 40,214 873 34,4 1048 41,215 898 35,4 1073 42,216 923 36,4 1098 43,217 949 37,4 1124 44,218 974 38,4 1149 45,219 1000 39,4 1175 46,220 1025 40,4 1200 47,221 1050 41,4 1225 48,222 1076 42,4 1251 49,223 1101 43,4 1276 50,224 1127 44,4 1302 51,225 1152 45,4 1327 52,226 1177 46,4 1352 53,227 1203 47,4 1378 54,228 1228 48,4 1403 55,229 1254 49,4 1429 56,230 1279 50,4 1454 57,231 1304 51,4 1479 58,232 1330 52,4 1505 59,233 1355 53,4 1530 60,234 1381 54,4 1556 61,235 1406 55,4 1581 62,236 1431 56,4 1606 63,237 1457 57,4 1632 64,238 1482 58,4 1657 65,239 1508 59,4 1683 66,240 1533 60,4 1708 67,241 1558 61,4 1733 68,242 1584 62,4 1759 69,243 1609 63,4 1784 70,244 1635 64,4 1810 71,245 1660 65,4 1835 72,2

10

24,40�7 Caliper Bracket Tolle�fork (part no 41,4) 11,5" S/S 24,412�7 Caliper Bracket Tolle�fork double (part no 41,4) 10" S/S 24,41�7 Caliper Bracket Tolle�fork (part no 41,4) 10" S/S 24,420�4 Caliper Bracket T�fork, speedo drv (part no 41,4) 8�5/8" Chr 24,42�7 Caliper Bracket Tolle�fork (part no 41,4) 8�5/8" S/S 24,430�4 Caliper Bracket T�fork, speedo drv (part no 41,0) 8�5/8" Chr 24,431�7 Caliper Bracket Tolle�fork (part no 41,0) 10" S/S. 24,432�7 Caliper Bracket Tolle�fork double (part no41,0) 8�5/8" S/S 24,43�7 Caliper Bracket Tolle�fork (part no41,0) 8�5/8 S/S 24,442�7 Caliper Bracket Tolle�fork double ISR�028/ 10" S/S. 24,44�7 Caliper Bracket Tolle fork iSR�028 / 043, 10" S/S 24,44�7 Caliper Bracket Tolle fork iSR�028 / 043, 10" S/S 24,45�7 Caliper Bracket Tolle�fork iSR�028 / 043, 8�5/8" S/S 24,46�7 Caliper Bracket Tolle�fork iSR�028 / 043, 11,5" S/S 24,720�2 Caliper Bracket Tolle�fork PM 2�piston 10" Alu. pol. 24,721�7 Caliper Bracket Tolle�fork PM 2�piston 11,5" S/S 24,728�2 Caliper Bracket Tolle�fork PM 2�piston 8�5/8 Alu. pol. 24,746�7 Caliper Bracket Tolle�fork PM 4�piston 11,5" S/S 24,747�7 Caliper Bracket Tolle�fork PM 4�piston 10" S/S 24,748�7 Caliper Bracket Tolle�fork PM 4�piston 8�5/8 S/S 24,84R�7 Caliper Bracket Tolle�fork orig. Caliper 00�up 11,5" Right S/S 24,84L�7 Caliper Bracket Tolle�fork orig. Caliper 00�up 11,5" Left S/S 24,86R�7 Caliper Bracket Tolle�fork orig. Caliper 84�99 24,84-R7 Caliper HD 00-up / disque 11,5’’ right

24,84-L7 Caliper HD 00-up / disque 11,5’’ left

24,44-7 Caliper ISR 22028,22043 / disc 10’’

24,45-7 Caliper ISR 22028,22043 / disc 8’’5/8

24,46-7 Caliper ISR 22028,22043 / disc 11,5’’

24,86-R7 Caliper HD 84-99 / disc 11,5’’ right

24,86-L7 Caliper HD 84-99 / disc 11,5’’ left

24,87-R7 Caliper HD 84-99 / disc 10’’ right

24,87-L7 Caliper HD 84-99 / disc 10’’ left

24,88-R7 Caliper HD 84-99 / disc 8’’5/8 right

11

39,21-2 M-c brake Tolle/Magura polished piston 11mm 39,22-2 M-c brake Tolle/Magura polished piston 12mm 39,23-2 M-c brake Tolle/Magura polished piston 13mm 39,24-2 M-c brake Tolle/Magura polished piston 14mm

38,2-2 Tolle/Magura wire clutch lever al.polished

Note : Must be adapted to fit 4 speed tranny type clutch cable with cylindrical tip

Cover with TOLLE logo Machined lever tip

39-011oc-2 M/c brake ISR/TOLLE p14mm 39-011od-2 M/c clutch ISR/TOLLE p14mm 39-011oa-2 M/c brake ISR/TOLLE p17.5mm 39-011ob-2 M/c clutch ISR/TOLLE p17.5mm

39-101-oa-2 Mini switch right 1 slide + 2 buttons poli 39-101-ob-2 Mini switch left 1 slide + 2 buttons poli 39-102-oa-2 Mini switch 1 slide + 1 button poli 39-103-oa-2 Mini switch 2 buttons poli 39-104-oa-2 Mini switch 1 slide poli 39-105-oa-2 Mini switch 1 button poli

Polished finish

38,003oa-2 Wire clutch lever ISR/TOLLE

Note : Mini switch not included

To fit 1’’ diameter bar

39,9 Internal wire throttle system to weld on 1’’ bar

SKF bearings mounted – The best system on the market

12

40,02p40A-4 Disc 11,5’’ lock XL/FXD 77-99 (swept 40mm) 40,52p40A-4 Disc 10’’ lock XL/FXD 77-99 (swept 40mm) 40,82p40A-4 Disc 8’’5/8 lock XL/FXD 77-99 (swept 40mm)

40,02p40-4 Disc 11,5’’ lock -99 (swept 40mm) 40,52p40-4 Disc 10’’ lock -99 (swept 40mm) 40,82p40-4 Disc 8’’5/8 lock -99 (swept 40mm)

40,02p40-4 Disc 11,5’’ lock -99 (swept 40mm) 40,52p40-4 Disc 10’’ lock -99 (swept 40mm) 40,82p40-4 Disc 8’’5/8 lock -99 (swept 40mm)

40,02p30A-4 Disc 11,5’’ lock XL/FXD 77-99 (swept 30mm) 40,52p30A-4 Disc 10’’ lock XL/FXD 77-99 (swept 30mm) 40,82p30A-4 Disc 8’’5/8 lock XL/FXD 77-99 (swept 30mm)

40,02p30-4 Disc 11,5’’ lock -99 (swept 30mm) 40,52p30-4 Disc 10’’ lock -99 (swept 30mm) 40,82p30-4 Disc 8’’5/8 lock -99 (swept 30mm)

40,02p30B-4 Disc 11,5’’ lock 00-up (swept 30mm) 40,52p30B-4 Disc 10’’ lock 00-up (swept 30mm) 40,82p30B-4 Disc 8’’5/8 lock 00-up (swept 30mm)

Note :

Brake discs for HD-99 have an inside Ø 50,3mm and brake discs for HD2000-up have an inside Ø 56,35mm

Choose your discs according to the hubs that will receive them whether it is round alu type or pentagon

steel type to get perfect backing. All discs are hard chromed treated which prevent from

corrosion and time wear. They are polished except on the swept to ensure

maximum pads’ grip.

13

40,00A-4 Disc 11,5’’ drilled XL/FXD 77-99 (swept 48mm) 40,50A-4 Disc 10’’drilled XL/FXD 77-99 (swept 48mm) 40,80A-4 Disc 8’’5/8 drilled XL/FXD 77-99 (swept 48mm)

40,00-4 Disc 11,5’’ drilled -99 (swept 48mm) 40,50-4 Disc 10’’ drilled -99 (swept 40mm) 40,80-4 Disc 8’’5/8 drilled -99 (swept 40mm)

40,00B-4 Disc 11,5’’ drilled 00-up (swept 48mm) 40,50B-4 Disc 10’’ drilled 00-up (swept 40mm) 40,80B-4 Disc 8’’5/8 drilled 00-up (swept 40mm)

40,01A-4 Disc 11,5’’ slotted XL/FXD 77-99 (swept 48mm) 40,51A-4 Disc 10’’ slotted XL/FXD 77-99 (swept 48mm) 40,81A-4 Disc 8’’5/8 slotted XL/FXD 77-99 (swept 48mm)

40,01-4 Disc 11,5’’ slotted -99 (swept 48mm) 40,51-4 Disc 10’’ slotted -99 (swept 40mm) 40,81-4 Disc 8’’5/8 slotted -99 (swept 40mm)

40,01B-4 Disc 11,5’’ slotted 00-up (swept 48mm) 40,51B-4 Disc 10’’ slotted 00-up (swept 40mm) 40,81B-4 Disc 8’’5/8 slotted 00-up (swept 40mm)

Note : Brake discs for HD-99 have an inside Ø 50,3mm and brake discs for HD2000-up have an inside Ø 56,35mm

Choose your discs according to the hubs that will receive them whether it is round alu type or pentagon steel type.

All our discs are hard chromed treated which prevent from corrosion and time wear.

14

41,025ou-2 Caliper ISR 4p right pol. 41,025ov-2 Caliper ISR 4p left pol. Note : Bracket not included

41,043oa-2 Caliper ISR mini 4p right pol.(22043) 41,043ob-2 Caliper ISR mini 4p left pol. Note : Disc not included

Other ISR calipers available in a polished finish – Please call

50,010oe-2 M-cyl. rear ISR pol. piston 14mm

50,009ob-2 M-cyl. rear ISR piston 14mm

Note : Mount to OEM bracket

15

Lock your bike with an ABUS Granit Xtreme locker type passing through the rear Tolle’s sprocket or brake discs Clean and efficient

35-05204 Sprocket brake kit cmplt. Typhoon 50 teeth 35,0523 Sprocket brake kit complt. Typhoon lock 52 teeth

35-060 Sprocket brake kit cpte Drilled 46 teeth35,080 Sprocket brake kit cpte Drilled 48 teeth

35-160 Caliper + sprocket Drilled 46 teeth35,180 Caliper + sprocket Drilled 48 teeth

35-061 Sprocket brake kit cpte Slotted 46 teeth 35,081 Sprocket brake kit cpte Slotted 48 teeth

35-161 Caliper + sprocket Slotted 46 teeth 35,181 Caliper + sprocket Slotted 48 teeth

16

35,261-5 Sprocket disc Slotted 46 teeth

35,281-5 Sprocket disc Slotted 48 teeth

35,260-5 Sprocket disc Drilled 46 teeth

35,280 Sprocket disc Drilled 48 teeth

35,2504-4 Sprocket disc Typhoon 50 teeth

35,2523-5 Sprocket disc Typhoon lock 52 teeth

To lock Tolle’s discs and sprockets use this special bloc disc

Locking system is made by Abus Granit Xtreme

27,51-7 Rear wheel axle with excentric specially made for sprocket brake

24,38x46-7 Mounting plate 46t 24,38x48-7 Mounting plate 48t 24,38x50-7 Mounting plate 50t 24,38x52-7 Mounting plate 52t

24,36x46-7 Mounting kit 46t 24,36x48-7 Mounting kit 48t 24,36x50-7 Mounting kit 50t 24,36x52-7 Mounting kit 52t

24,28-1 Welding type frame bracket for sprocket brake caliper

17

70,1-2 Pop up cap al. with alu collar to weld 70,1-2/7 Pop up cap al. with stainless steel collar to weld 70,1-2/8 Pop up cap al. with tin coated steel collar to weld 70,1-7 Pop up cap stainless steel pol. with ssteel collar to weld 70,1-7/8 Pop up cap stainless steel with steel collar to weld 70,13 Gasket 32/40x3mm 70,51 Gasket 40/52x1mm 70,53 Gasket 40/52x3mmNote : Those caps match all types of tanks fuel, water or oil. We suggest you braze the collar to get a nice finish. Choose the cap and the collar material according to the tank material.

You may paint then them to match the color of your bike Push, ¼ turn, Pop up and unscrew it’s open

CAUTION ! Fully clean your tanks before welding 70,70R-7 Pop up ssteel XLarge Right screw type

70,70RV-7 Pop up Ssteel XLarge Right vented screw type

70,70L-7 Pop up ssteel XLarge left screw

70,5R-7 Pop up ssteel pol. Right non vented screw type 70,5RV-7 Pop up ststeel pol. Right vented screw type 70,5L-7 Pop up ssteel poli Left non vented screw type

Note : Those Caps are made to fit HD type tank thread They can be mounted in seconds on your newly painted tank without any cutting nor welding process. They can be painted as well to match the color of your bike.

Push, ¼ turn, Pop up and unscrew it’s open NEW ! Gas cap Pop up style left side for Dyna with integral gas gauge. Note :No tank filling through it.

Try the original

Pop Up

&

Feel the

Difference !

18

34,16B-4 Sprocket 46t straight spokes for alu hub 00-up (round flange)

34,16A-4 Sprocket 46t straight spokes for alu hub FXD-XL 99-up (round flange)

34,16-4 Sprocket 46t straight spokes for steel pentagon hub 73 99 up

34,18B-4 Sprocket 48t bent spokes for alu hub 00-up (round flange)

34,18A-4 Sprocket 48t bent spokes for alu hub FXD-XL 99-up (round flange)

34,18-4 Sprocket 48t bent spokes for steel

19

20