Long Arms and Chemical Arms: Extraterritoriality and the ...
Today’s Security Calls For Strength Against Arms This …€¦ · Today’s Security Calls For...
Transcript of Today’s Security Calls For Strength Against Arms This …€¦ · Today’s Security Calls For...
BALLISTIC SERIES Model 30.06 Non-Ballistic Frame
Today’s Security Calls For Strength Against ArmsThis Door Is Loaded With Ballistic Features
Feature:
• Manganese Plate
• Lock Reinforcements
• Ballistic Plate
• Integrated Subframe
• Adjustable Hinges
Sweep Stud Adjustable Hinges
Benefit:
• Able to withstand destructive Tornado F-5 winds up to 250 MPH (Texas Tech University tested); great added security
• Protects lock from aggressive attacks
• An additional layer of security to resist armed intruders from penetrating the door or disrupting interior security features
• Reduces installation time and expense, precision fit
• Easy to adjust even after installation, Up-down and side-to-side
Certifications:
UL 3 and UL 4 - National Technical Systems (NTS)
Plano, Texas, USA
Panels:
• MDF (Fiber Resin), Pantograph Wood (shown), Aluminum and Laminate
• Colors: RAL Chart, Pantograph Wood (see catalogue)
© 2009 Master Security Doors, Inc.
Master Security Doors, Inc.702 South Military Trail Deerfield Beach, FL 33442
Toll Free 1.866.278.7182 Phone 954.571.7300
Fax 1.866.278.7183 954.571.6601
www.mastersecuritydoors.com
Applications:
Residential (front and back doors, pool door, safe room), apartments, hotels, office buildings, dormitories, industrial buildings, multi-level garages; and wherever high security protection is a concern
FACTORY SPECIFICATIONS Ballistic Series - Model 30.06 Non-Ballistic Frame
© 2009 Master Security Doors, Inc. Conversion: 25.4 millimeters (mm) = 1 inch (in) Specifications subject to change without notice.
Gauge of Frame 14 (2mm)
Gauge of Leaf 18 ( 1.2 mm )
Thickness of Leaf 1.81' ( 46 mm )
Type of metal for frames and Leaf Frame = Pre-filmed in PVC Steel coil Leaf = Galvanized Steel sheet
Rust treatment (Pre-Treated) Frame = Pre-filmed PVC Filmed Leaf = Galvanized Steel sheet
Available Leaf Sizes (Widths and Heights) Standard Sizes
(Sample Tested 37"x 81.10" (940x2060mm)) Width :31-1/2", 33-1/2", 35-1/2" Height : 82- 5/16" (2100 mm)
Available Jamb Widths 2-1/2" (63mm)
Available Jamb Depths 2-7/8" (73mm)
Standards meet or exceeded (ASTM, ANSI etc) ISO/IEC 17025:2005 ANSI/NCSL Z540-1
Certifications (rating, testing agency, test number, configuration) UL3 and UL 4 - National Technical Systems - TX, USA (NTS)
Type of panels (Styles/designs, materials, application guidance, colors) Aluminum, Laminated, Pantograph and MDF. MDF for interior only
Locks (Requirements for use of alternative locksets) CISA (Ingersoll Rand)
Latch Systems and latch adjustment mechanism (adjustment detail) Multilocking System - 2-1/2" (64mm) Backset
Mechanical or Laser cut Keys Mechanical
Available Prepped for Electrical Yes (According to Technical Feasibility)
Door Handing Right or Left
Hinges - Sizes, Number 3 Hinges Assembly: 1x3 Hinge Male (3.030"x2.170") and 1x3 Hinge Female (1.158"x2.520")
Pins (Pins inside the hinges) YES
Studs 5 (Hinges Side of Door)
Reinforcements (thickness, spacing, locations, etc.)Balistic panel (th=6 mm) placed in the external side of the door; Lock reinforcement plate; Manganese Panel (th=2 mm)
Predrilled YES
Pre-hung YES
Primed Frames and Leaf (for no panel options), type of paint, see Amweld steel doors and frames Spec Data sheet 08110 Table 4 - Amweld Paint Specifications))
N.A.
Painted (for no panel options), type of paint N.A.
Paint colors available (for no panel options), type of paint N.A.
Handles (requirements /options for alternate handle sets) Any
Peepholes N.A.
Sweeps (type -standard /optional) Yes
Sills (standard and optional - i.e. handicap) N.A.
Gasketing, seals, weatherstripping (standard and optional) Flexible gasket in "Elaprene"
Electric Locking options (pin pad, card reader, biometrics) CISA mechanical lock only
Frames Install Applications: Concrete, Subframe/Frame, Wood Stud, Steel Stud, Wrap-around
All
Design of Frames: Subframe/Frame, Wrap around, Single Rabbet, Double Rabbet, Cased
OpenALL with exception of Cased Open where 3006NBF door has NO rabbet.
Sub Frame assembly detail Detail With Shop Drawing
Finished Frame assembly detail Detail With Shop Drawing
Anchorage (see installation instructions - number of anchors, type, size, locations, any additional requirements per each model)
Detail With Shop Drawing
Core Materials Polypropolyne
Fire Rating (Standard and optional) N.A.
Temperature Rise Rating N.A.
STC Rating - Tested in accordance with ASTM E90 & E413 N.A.
U-Factor 0.285
R-Factor 3.5
Type of metal seams (i.e. seamless, welded, folded, etc.) Welded , Folded
120 hr continous salt spray test per ASTM B117 N.A.
240 hr continous humidity test per ASTM D4585 N.A.
Physical Endurance (Cycle Testing) (Handles exceed standards) 182,500 for Residential and 255,500 for Non-Residential
Protective film on panel - (packaging /shipping info) Yes
Individually packaged in cardboard (packaging /shipping info) or other packaging method Yes
Fully plastic wrapped (packaging /shipping info) Yes
Door and Frame Construction Certification Labels Available upon request
SDI Level 4
Leaf Ballistic Rating Level (standard and optional) - (i.e Level 1 through Level 8) 1/4" (6mm) Thick.Ballistic - Rating Level 1 through 4
Frame Ballistic Rating Level (i.e. Level 1 through Level 8) N.A.
Ballistic Ratings (ammunition type & associated muzzle /minimum velocities, shell grains)30.06 caliber - 2702 Ft/Sec - 180 grain lead core soft point 44 magnum 240 grain 1377 Ft/sec
Ballistic lockset /handles (standard and optional suppliers) N.A.
Separate Warranty sheet Check with Supplier
Warranty (only if different from the Warranty sheet) Check with Supplier
Component supplier - Manufacturer’s installation instructions and adjustment procedures Check with Supplier
Optional hardware and supported manufacturers (panic release bars, single turn locking capability)
N.A.
Glass (standard and optional) thickness,security and thermal ratings, certification levels N.A.
Storage Requirements Covered and protected area
Any truly special features or functions or options N.A.
Weight of Door (lbs) 500 lbs Approx ( 250 Kg approx )
DRAWINGS Ballistic Series - Model 30.06 Non-Ballistic Frame
©2009 Master Security Doors, Inc. Specifications subject to change without notice.
ORDER OF DRAWINGS
Number Description
30.06 NBF - 01 Ballistic Panel
30.06 NBF - 02 CAL 30.06 Horizontal Section
30.06 NBF - 03 CAL 30.06 Vertical Section
30.06 NBF - 04 Cylinder Lock
30.06 NBF - 05 Frame
30.06 NBF - 06 Horizontal Section
30.06 NBF - 07 Lower Perimetical Profile
30.06 NBF - 08 Lower Perimetical Profile
30.06 NBF - 09 Manganese Panel
30.06 NBF - 10 Metal Leaf
30.06 NBF - 11 Perimetrical Profile
30.06 NBF - 12 Section Door
30.06 NBF - 13 Section Door 1
30.06 NBF - 14 Subframe
30.06 NBF - 15 Vertical Section
30.06 NBF - 16 Material List
DRAWINGS Ballistic Series - Model 30.06 Non-Ballistic Frame
Item
Description
No.
Material
1
Frame
1
Hot zinc plated pre-filmed th= 17/10mm
2
Reinforcement
1
Sheet-steel Th=12/10mm
3
Central reinforcement
1
Sheet-steel Th=12/10mm
4
Upper bolt
1
Sheet-steel Th=20/10mm
5
Bracket
8
Decaped sheet-steel th=50/10mm
6
Spongy insulator
1
Sponge Th=40/10mm
7
Vertical connecting rode
2
Steel
8
Seeger
4
Plastic material
9
Lock reinforcement plate
1
Sheet-steel Th=30/10mm
10
Cylinder lock
1
Cylinder lock Cisa 56515-48-0-00ST
11
Lock fixing screw
2
TC M6x35 ZNT
12
Interior panel
1
Medium tanganyka
13
Lower bolt
1
Sheet-steel Th=20/10mm
14
Fixing screw
2
M5x30 ZNA3B
15
Bracket for frame assembly
2
Sheet zinc steel Th=25/10mm
16
Metal leaf
1
Sheet-steel Th=12/10mm
17
Balistic panel
1
ARMOX 500T Th=60/10mm
18
Polystirene sheet-internal side
1
Polystirene
19
Exterior panel
1
Medium tanganyka
20
Hinges plate
3
Sheet-steel Th=50/10mm
21
Stud
5
Steel
22
Fixed Knob
1
Bronze
23
Conic protection
2
Steel
24
Subframe
1
Pre-painted sheet Th=19/10mm
25
Basket
3
Type 65/1
26
Perimetrical profile
3
Hot zinc plated pre-filmed Th= 17/10mm
27
Handle
1
Bronze
28
Conic protection
2
Steel
29
Weather strip
1
----
Item
Description
No.
Material
30
Lower perimetrical profile ext. side
1
Hot zinc plated pre-filmed Th= 17/10mm
31
Lower perimetrical profile int. side
1
Hot zinc plated pre-filmed Th= 17/10mm
32
Polystirene panel-
metal leaf side
1
Polystirene
33
Hinges
3
Steel
34 Manganese Panel 1 Manganese Th=20/10mm