TO: RE: 028030-Retaining Wall ATTN: JOB: WE ARE...
Transcript of TO: RE: 028030-Retaining Wall ATTN: JOB: WE ARE...
15JW020-0099No.
TSP IncOne South Scott St Sherdian WY 82801
TO:
10/08/2015DATE:
028030-Retaining WallRE:
William (Bill) GoodmanATTN:
Shop Drawings
Letter
Prints
Change Order
Plans
Samples
Specifications / Product Data
Other:
Approval
Your Use
As Requested
Review and Comment
Attached
Separate Cover Via:
Approved as Submitted
Approved as Noted
Returned After Loan
Resubmit
Submit
Returned
Returned for Corrections
Due Date: 10/09/2015
WE ARE SENDING: SUBMITTED FOR:
SENT VIA:
ACTION TAKEN:
TRANSMITTAL
Clint MoseleySigned:
PROJECT: SCSD2-SHS Locker Room Addition/Renovation
10/08/2015
Date
028030.01
Code
Product Data
Description
Submitted ForReview
Status
JOB: 15JW020
CC:
Item
Submittal 028030
Package
1
Rev. Copies
Ph/Fax: 307-672-6496 307-672-7487
NOTES:
5311 Coffeen AvenueP.O. Box Drawer SSheridan, WY 82801307-745-4866307-745-4867 (fax)
Comments noted thus:GoodmanWD 10/15/2015
X
Pavestone color is "Mountain Blend"
Anchor™ Highland Stone® Free Standing Wall
© 2010 by Pavestone Company. All Rights Reserved. and Improving Your Landscape™ are trademarks of the PavestoneCompany. Highland Stone®” are registered trademarks of AWS, and are manufactured under license from, Anchor Wall Systems, Inc.These Anchor products are protected by U.S. and International patents and pending patent applications.
• Atlanta, GA: (770) 306-9691
• Austin/San Antonio, tX: (512) 558-7283
• Boston, MA: (508) 947-6001
• cartersville, GA (770( 607-3345
• charlotte, nc: (704) 588-4747
• cincinnati, oH: (513) 474-3783
• colorado Springs, co: (719) 322-0101
• Dallas/Ft. Worth, tX: (817) 481-5802
• Denver, co: (303) 287-3700
• Hagerstown, MD: (240) 420-3780
• Houston, tX: (281) 391-7283
• Kansas city, Mo: (816) 524-9900
• las Vegas, nV: (702) 221-2700
• new orleans, lA: (985) 882-9111
• phoenix, AZ: (602) 257-4588
• St. louis/
cape Girardeau, Mo: (573) 332-8312
• Sacramento/
Winters, cA: (530) 795-4400
Member of ASlA and ncMA
www.pavestone.com
icpi charter Member
CDC 13
2v4 7/10
Step 1 - Excavate down and create a leveling pad of compacted base material thatextends a minimum 6” in front of and 6” behind the stone. This leveling pad shouldalso be a minimum of 6” deep. Once the pad is level and compact, begin placing thestones. The base course must be buried below grade and is included whencalculating total wall height.
Step 2 - To build the wall, use the trapezoidal-shaped stones. The long side should beplaced in alternating directions (back and front) to form a straight wall. To turn aradius, stones can be placed facing the same direction or saw-cut if needed.
Step 3 - Stones can be placed in any order to form an aesthetically pleasing pattern. Thesimplest pattern is one that incorporates large, medium and small stones. Stonesshould be fitted tightly against one another.
Step 4 - After setting the first course, sweep it clean to remove any debris before settingthe second course on top of it. Remember to keep the wall on bond by placingstones in a staggered relationship to the course beneath.
Step 5 - Repeat this process to complete the wall. When finishing, glue the top twocourses and cap into place with a concrete bonding material. For added strength, useglue on all courses.
Column: Add a dignified look and increased stability to a wall. Columns are also a greatway to incorporate lighting. Columns can be located in the middle or at the ends ofa wall. The space left in the center of a column allow for reinforcement or electricalwiring if needed. To build columns, cut one column stone in half and stack columnstones in a rotating pattern for each course. Two (2) column stone halves are neededfor every four (4) courses.
The Anchor Highland Stone® Free Standing Wall is crafted with the same earthen colors and rough-hewn texture that made the AnchorHighland Stone® a top choice for retaining walls. The stones are available in three different sizes giving wall appearance a more natural look.Straight or curved, the Anchor Highland Stone® Free Standing Wall is our most versatile landscape product yet.
coMpoSition AnD MAnUFActURe
Anchor Highland Stone® Free Standing Wall is made from a “no slump” concrete mix. Made under extreme pressure and high frequency vibrations,Anchor Highland Stone® has a compressive strength greater than 3500psi and a water absorption maximum of 7%.
inStAllAtion
pRoDUct inFoRMAtionAnchor Highland Stone® Free Standing Wall isavailable in a variety of sizes.
Maximum wall height: 2 1/2 ft. Minimum radius: 4 ft.
* Fractional dimensions are nominal **Caps not available in all markets.** Does NOT included 50 lbs. for wooden Pallet.
ApplicAtionSSeating Areas • Borders • Pilasters • Columns
18” Highland FSWNominal Dimensions: Front: 18" L x 9" W x 6" H Back: 16" L x 9" W x 6" HWt./Stone: 80 lbs.Stones/Pallet: 40Approx. Wt./Pallet: 3200 lbs.**Face Ft./Pallet: 29Product Number: 893
12” Highland FSWNominal Dimensions: Front: 12" L x 9" W x 6" H Back: 10" L x 9" W x 6" HWt./Stone: 50 lbs.Stones/Pallet: 60Approx. Wt./Pallet: 3000 lbs.**Face Ft./Pallet: 28Product Number: 892
6” Highland FSWNominal Dimensions:
Front: 6" L x 9" W x 6" HBack: 4" L x 9" W x 6" H
Wt./Stone: 20 lbs.Stones/Pallet: 100Approx. Wt./Pallet: 2,000 lbs.**Face Ft./Pallet: 21Product Number: 891
Highland ColumnNominal Dimensions: Front: 18" L x 9" W x 6" H Back: 18" L x 9" W x 6" HWt./Stone: 75 lbs.Stones/Pallet: 40Approx. Wt./Pallet: 3000 lbs.**Face Ft./Pallet: 30Product Number: 894
Complete installation & specification details are available by contacting your Pavestone Sales Representative.
Note: Colors are shown as accurately as possible in brochures & samples, but dueto the nature of the product, regional color differences and variables in print reproduction, colors may not match exactly.
Column Installation Corner Installation
Anchor Wall Cap #824**Nominal Dimensions: 17 1/4" L x 10" W x 3" H* Wt./Stone: 34 lbs.Stones/Pallet: 90Approx. Wt./Pallet: 3,060 lbs.Linear Ft./Pallet: 130Product Number: 824
ADOBE BLEND
STANDARD COLORSRocky Mountain Retaining Wall Colors
CR
EA
TI
NG
B
EA
UT
IF
UL
L
AN
DS
CA
PE
S™
4 CANYON BLEND
ANTIQUE TERRA COTTA BUFF BUFF/CHARCOAL
DESERT BLEND LIGHT BROWN MOUNTAIN BLEND
OAKS BLEND RIVER RED TAN BROWN
NOTE: Not all colors are available in all products.4 Available only from Colorado Springs manufacturing plant.
Call for Pricing, Shapes, and Availability.
NOTE: Not all colors are available in all products.
Color VariationsAs in all natural materials, color in wall stones has inherent variations. Wall color is affected by the variances in the raw materials, concrete mixture moisture content, climactic conditions, and other variations. Therefore, the colors shown are approximate representations of Pavestone’s wall colors but should not be expected to be an exact match of what will be delivered.
The Nature of EfflorescenceAnother cause of color variation in walls may be the natural phenomenon called efflorescence. Efflorescence, a deposit of white salts consisting of mostly calcium carbonate, may appear as a whitepowder on the wall surface and in no way affects the structural integrity. This phenomenon occurs in all concrete and although it cannot be completely prevented from occurring, efflorescence generallywill weather off and disappear over time or can be removed with cleaners at the job site.
TERRA COTTA WINTER BLENDVALLEY BLEND
ANCHOR™ HIGHLAND STONE® RETAINING WALL SYSTEM
Colors shown are available only from the Denver, Colorado, manufacturing plant. 4 Available only from Colorado Springs manufacturing plant.
ANCHOR™ HIGHLAND STONE® RETAINING WALL SYSTEM
Rocky Mountain Retaining Wall ColorsSTANDARD COLORS
Rocky Mountain Retaining Wall Colors
Product Name Product Number Colors
Rocky Mountain Retaining Walls
Find our latest product information at www.pavestone.com
* Call for Pricing, Shapes, and Availability if not represented in above chart.
© 2012 Pavestone, LLC. All Rights Reserved. , Creating Beautiful Landscapes™, and arazzo™ are trademarks of Pavestone, LLC. Brighton Stone®, Diamond Pro Stone Cut®, Diamond Pro®, Diamond Stone Cut®, Highland Stone®,Sequent™, and Windsor Stone® are trademarks of Anchor Wall Systems, Inc. (AWS). arazzo, Brighton Stone, Diamond Pro Stone Cut, Diamond Pro, Diamond Stone Cut, Highland Stone, and Windsor Stone are manufactured under license from AWS.
Retaining Wall Systems
Colors shown in this chart are available only from the Denver, Colorado, manufacturing plant. 4 Available only from Colorado Springs manufacturing plant.
CD
C 4
22 1
1/12
arazzo™ Retaining Wall 897 Desert Blend, Valley Blend
arazzo™ Cap 868 Desert Blend, Valley Blend
Anchor™ Brighton Stone® Retaining Wall System 836 Beige, Oaks Blend, Terra Cotta
Anchor™ Diamond Pro Stone Cut®Retaining Wall System
818N (18")835N (3-PC Combo) 4 Tan Brown
Anchor™ Diamond Pro® StraightRetaining Wall System 827N Buff, Light Brown
Anchor™ Diamond Stone Cut®Retaining Wall System 823 Buff/Charcoal, 4 Canyon Blend, 4 Winter Blend
Anchor™ Highland Stone® Retaining Wall System 876 (6" Combo)883 (18") Adobe Blend, Mountain Blend, Tan Brown, Winter Blend
Anchor™ Highland Stone® Freestanding Wall System 889N (6" Combo)894 (Column) Adobe Blend, Mountain Blend, Tan Brown, Winter Blend
Rectangle Cap 819 Adobe Blend, Buff, Buff/Charcoal, Light Brown, Mountain Blend, Oaks Blend, Tan Brown, Terra Cotta, Winter Blend
Rumbled™ Wall 519 Antique Terra Cotta, Winter Blend
Anchor™ Sequent™ Retaining Wall Panel System6-inch / 8-inch Combo
876835N Tan Brown
Anchor™ Windsor Stone® Retaining Wall System 811 Beige, Oaks Blend, River Red, Terra Cotta
Anchor™ Windsor Stone® Cap 814 Beige, Oaks Blend, River Red, Terra Cotta
NOTE: Not all colors are available in all products.