To Pull the ROSA EM Devlist

13
To pull the ROSA EM devlist First go to start menu, click, now high light program then move to ROSA Config. Tools, click on ROSA EM tools environment. Type getdevlist 10.88.XX.190 then enter

description

Procedure to pull EM Devlist on ROSA

Transcript of To Pull the ROSA EM Devlist

Page 1: To Pull the ROSA EM Devlist

To pull the ROSA EM devlistFirst go to start menu click now high light program then move to ROSA Config Tools click on ROSA EM tools environmentType getdevlist 1088XX190 then enter

Type in the password rosaem then enterPress enter and enter again until you get to ROSA EM configuration toolsgt type notepad then enter

Go into My computer your C hard drive and right click on the C drive to pull up Programs files next click on Scientific-Atlanta the go to ROSA EM Configuration tools Open it to locate the file just down loaded from the ROSA EM

Added 110811

The password is rosaem

On with Notepad

Below is the latest dev list on file for the ROSA EM IP number 1090138222 save the file in the proper location

Uploading the Device ListAfter editing the device list you can upload this file to the ROSA EM device The

following procedure explains how to upload the device list to a ROSA EM device1 Click on the Windows Start button move to Programs ROSA EMConfiguration Tools and select ROSA EM Tools EnvironmentResult The ROSA EM Tools Environment window is displayed2 Enter the following instructions on the command promptputdevlist XXXX YWith1048707 XXXX the IP address of the ROSA EM device

1048707 Y directory and filenamendash Directory directory where the device list file is locatedndash Filename the name of the device list fileNote The Y parameter is optional If it is not added to the putdevlist commandthe devlist in the current directory is automatically selected or you will beprompted to provide one if there is no devlist in the current directory3 Enter the FTP password on the command promptResult The device list file is renamed to devlisttxt and uploaded to the ROSAEM deviceNote The FTP password prompt is only displayed if your ROSA EM has bootsoftware version V040050 or higher For more information please refer to topicManaging Services on page 754 The ROSA EM device is restarted and uses the newly uploaded device listNote Restarting the device will take some time

Note herersquos the result for getdevlist 993238126 sorry cable was pulled out was able to get all three devlist 126125 and 122

Note Matt had started adding to IP 225 with the naming convention noting on the other two

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 2: To Pull the ROSA EM Devlist

Type in the password rosaem then enterPress enter and enter again until you get to ROSA EM configuration toolsgt type notepad then enter

Go into My computer your C hard drive and right click on the C drive to pull up Programs files next click on Scientific-Atlanta the go to ROSA EM Configuration tools Open it to locate the file just down loaded from the ROSA EM

Added 110811

The password is rosaem

On with Notepad

Below is the latest dev list on file for the ROSA EM IP number 1090138222 save the file in the proper location

Uploading the Device ListAfter editing the device list you can upload this file to the ROSA EM device The

following procedure explains how to upload the device list to a ROSA EM device1 Click on the Windows Start button move to Programs ROSA EMConfiguration Tools and select ROSA EM Tools EnvironmentResult The ROSA EM Tools Environment window is displayed2 Enter the following instructions on the command promptputdevlist XXXX YWith1048707 XXXX the IP address of the ROSA EM device

1048707 Y directory and filenamendash Directory directory where the device list file is locatedndash Filename the name of the device list fileNote The Y parameter is optional If it is not added to the putdevlist commandthe devlist in the current directory is automatically selected or you will beprompted to provide one if there is no devlist in the current directory3 Enter the FTP password on the command promptResult The device list file is renamed to devlisttxt and uploaded to the ROSAEM deviceNote The FTP password prompt is only displayed if your ROSA EM has bootsoftware version V040050 or higher For more information please refer to topicManaging Services on page 754 The ROSA EM device is restarted and uses the newly uploaded device listNote Restarting the device will take some time

Note herersquos the result for getdevlist 993238126 sorry cable was pulled out was able to get all three devlist 126125 and 122

Note Matt had started adding to IP 225 with the naming convention noting on the other two

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 3: To Pull the ROSA EM Devlist

Go into My computer your C hard drive and right click on the C drive to pull up Programs files next click on Scientific-Atlanta the go to ROSA EM Configuration tools Open it to locate the file just down loaded from the ROSA EM

Added 110811

The password is rosaem

On with Notepad

Below is the latest dev list on file for the ROSA EM IP number 1090138222 save the file in the proper location

Uploading the Device ListAfter editing the device list you can upload this file to the ROSA EM device The

following procedure explains how to upload the device list to a ROSA EM device1 Click on the Windows Start button move to Programs ROSA EMConfiguration Tools and select ROSA EM Tools EnvironmentResult The ROSA EM Tools Environment window is displayed2 Enter the following instructions on the command promptputdevlist XXXX YWith1048707 XXXX the IP address of the ROSA EM device

1048707 Y directory and filenamendash Directory directory where the device list file is locatedndash Filename the name of the device list fileNote The Y parameter is optional If it is not added to the putdevlist commandthe devlist in the current directory is automatically selected or you will beprompted to provide one if there is no devlist in the current directory3 Enter the FTP password on the command promptResult The device list file is renamed to devlisttxt and uploaded to the ROSAEM deviceNote The FTP password prompt is only displayed if your ROSA EM has bootsoftware version V040050 or higher For more information please refer to topicManaging Services on page 754 The ROSA EM device is restarted and uses the newly uploaded device listNote Restarting the device will take some time

Note herersquos the result for getdevlist 993238126 sorry cable was pulled out was able to get all three devlist 126125 and 122

Note Matt had started adding to IP 225 with the naming convention noting on the other two

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 4: To Pull the ROSA EM Devlist

The password is rosaem

On with Notepad

Below is the latest dev list on file for the ROSA EM IP number 1090138222 save the file in the proper location

Uploading the Device ListAfter editing the device list you can upload this file to the ROSA EM device The

following procedure explains how to upload the device list to a ROSA EM device1 Click on the Windows Start button move to Programs ROSA EMConfiguration Tools and select ROSA EM Tools EnvironmentResult The ROSA EM Tools Environment window is displayed2 Enter the following instructions on the command promptputdevlist XXXX YWith1048707 XXXX the IP address of the ROSA EM device

1048707 Y directory and filenamendash Directory directory where the device list file is locatedndash Filename the name of the device list fileNote The Y parameter is optional If it is not added to the putdevlist commandthe devlist in the current directory is automatically selected or you will beprompted to provide one if there is no devlist in the current directory3 Enter the FTP password on the command promptResult The device list file is renamed to devlisttxt and uploaded to the ROSAEM deviceNote The FTP password prompt is only displayed if your ROSA EM has bootsoftware version V040050 or higher For more information please refer to topicManaging Services on page 754 The ROSA EM device is restarted and uses the newly uploaded device listNote Restarting the device will take some time

Note herersquos the result for getdevlist 993238126 sorry cable was pulled out was able to get all three devlist 126125 and 122

Note Matt had started adding to IP 225 with the naming convention noting on the other two

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 5: To Pull the ROSA EM Devlist

On with Notepad

Below is the latest dev list on file for the ROSA EM IP number 1090138222 save the file in the proper location

Uploading the Device ListAfter editing the device list you can upload this file to the ROSA EM device The

following procedure explains how to upload the device list to a ROSA EM device1 Click on the Windows Start button move to Programs ROSA EMConfiguration Tools and select ROSA EM Tools EnvironmentResult The ROSA EM Tools Environment window is displayed2 Enter the following instructions on the command promptputdevlist XXXX YWith1048707 XXXX the IP address of the ROSA EM device

1048707 Y directory and filenamendash Directory directory where the device list file is locatedndash Filename the name of the device list fileNote The Y parameter is optional If it is not added to the putdevlist commandthe devlist in the current directory is automatically selected or you will beprompted to provide one if there is no devlist in the current directory3 Enter the FTP password on the command promptResult The device list file is renamed to devlisttxt and uploaded to the ROSAEM deviceNote The FTP password prompt is only displayed if your ROSA EM has bootsoftware version V040050 or higher For more information please refer to topicManaging Services on page 754 The ROSA EM device is restarted and uses the newly uploaded device listNote Restarting the device will take some time

Note herersquos the result for getdevlist 993238126 sorry cable was pulled out was able to get all three devlist 126125 and 122

Note Matt had started adding to IP 225 with the naming convention noting on the other two

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 6: To Pull the ROSA EM Devlist

following procedure explains how to upload the device list to a ROSA EM device1 Click on the Windows Start button move to Programs ROSA EMConfiguration Tools and select ROSA EM Tools EnvironmentResult The ROSA EM Tools Environment window is displayed2 Enter the following instructions on the command promptputdevlist XXXX YWith1048707 XXXX the IP address of the ROSA EM device

1048707 Y directory and filenamendash Directory directory where the device list file is locatedndash Filename the name of the device list fileNote The Y parameter is optional If it is not added to the putdevlist commandthe devlist in the current directory is automatically selected or you will beprompted to provide one if there is no devlist in the current directory3 Enter the FTP password on the command promptResult The device list file is renamed to devlisttxt and uploaded to the ROSAEM deviceNote The FTP password prompt is only displayed if your ROSA EM has bootsoftware version V040050 or higher For more information please refer to topicManaging Services on page 754 The ROSA EM device is restarted and uses the newly uploaded device listNote Restarting the device will take some time

Note herersquos the result for getdevlist 993238126 sorry cable was pulled out was able to get all three devlist 126125 and 122

Note Matt had started adding to IP 225 with the naming convention noting on the other two

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 7: To Pull the ROSA EM Devlist

Note Matt had started adding to IP 225 with the naming convention noting on the other two

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 8: To Pull the ROSA EM Devlist

Put Devlist

Password rosaemOpertation to put devlistOnce into

Put devlist then enter pass word

Page 9: To Pull the ROSA EM Devlist

Put devlist then enter pass word