TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding...
Transcript of TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding...
![Page 1: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/1.jpg)
February 4, 2020 / TMMTX
Packaging Workshop
![Page 2: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/2.jpg)
2
Property of ORBIS Corporation | www.orbiscorporation.com
Packaging Overview
• Packaging Overview – Container selection factors – QPC optimization within target container – Parts that require custom dunnage
BC
![Page 3: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/3.jpg)
3
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak® System• 4 Generations in the family of StakPak® containers
• 27 models / sizes
• Weight capacity up to 40lbs.
• Smooth internal walls for ORBIShield dunnage installation
• Containers cube out standard AIAG pallets
• Material: HDPE– ESD / FR / Micro Fine Cell
• Manufacturing locations • Urbana, OH• Silao, Mexico• Osage City, KS
![Page 4: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/4.jpg)
4
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Systems
![Page 5: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/5.jpg)
5
Property of ORBIS Corporation | www.orbiscorporation.com
Benefits of StakPak Containers• Ergonomics/Safety
– Sprains, strains, lacerations
• Legislation on recycling and recyclable materials
• Eliminates corrugated packaging costs– corrugated setup costs– disposal of corrugated or
expendables– reduces logistics costs– packaging quality
![Page 6: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/6.jpg)
6
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Features
• Drain holes in bumper and handles– prevent water from collecting in pocket areas and
in bumper– allows container to dry faster after washing– saves water in washers that recycle the water
• Continuous bumper– keeps dust and dirt from contaminating product
inside– acts as lid for container below
![Page 7: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/7.jpg)
7
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Features (cont.)
• Detached Lids• Attached Lids
– Plastic hinge elements for 100% recyclability– Easy to repair/replace in the field
![Page 8: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/8.jpg)
8
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Container Versions
RContainers: NSO (left), NXO
(right) and long boxesWhen used: cross stack apps –
higher weight loads –conveyors
REMEMBER: ID is reduced by ½” – cannot stack on any lids
MContainers: NSO, NXOWhen used: General applicationsNoise reduction when rolling on
a conveyor
SContainers: SOWhen used: when need
a little more durable bottom – may work better with some conveyors
![Page 9: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/9.jpg)
9
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Options• StakPaks are available with:
– Hotstamps– Textured Surface– Cardholders– Labels– Label placards– Sequential numbers– Handles– Routered bottoms– Drain holes
• Standard stocked colors are:– Grey, Royal Blue, Med Green– All other colors there will be
color set-up charge.
• Non-Standard colors are available. Set up charges and additional costs apply
![Page 10: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/10.jpg)
10
Property of ORBIS Corporation | www.orbiscorporation.com
Folding ContainersConductive & Static Dissipative• Conductive
– Materials have a surface resistance of < 10⁴ Ohms.
– Quickly displaces the charge, helping to protect direct discharges from reaching sensitive products.
• Static dissipative – Materials have a surface resistance of ≥10⁴
to <10¹¹ Ohms. – Displaces charge slower than conductive
materials. – Dissipative materials help protect against
charged device model (CDM) damage. – Sensitive device or circuit board becomes
charged, dissipative material will slowly control the discharge to protect the product.
CONFIDENTIAL Copyright©2019 ORBIS
![Page 11: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/11.jpg)
11
Property of ORBIS Corporation | www.orbiscorporation.com
Folding ContainersESD Protective SolutionsConductive:
• Injection Molded – StakPak® Straight wall containers– LEWISBin+® Storage containers
• Thermoform – 45x48-2 MI Pallet
• ORBIShield® Plastic Corrugated– Dunnage– Sheet– Containers
CONFIDENTIAL Copyright©2019 ORBIS
Static Dissipative: • Injection Molded
– StakPak® Straight wall containers• Compression Molded
– LEWISBin+® Plexton® Heavy Duty Trays
![Page 12: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/12.jpg)
12
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak® Cut-N-Weld™• Add length, width or height to an existing injection-molded StakPak to
create a durable, returnable container to fit your specific application.
![Page 13: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/13.jpg)
13
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Cut-N-Weld
• Optional hand holes with or without plastic handle inserts• Ergonomic pocket handles for comfort and safety.• Hot stamping, cardholders and label placards available. Has
protected exterior space for customer identification.• Identification options include molded-in logo, hot stamp and
cardholders• Compatibility with select extended ORBIS thermoformed
pallets
![Page 14: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/14.jpg)
14
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Systems
![Page 15: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/15.jpg)
15
Property of ORBIS Corporation | www.orbiscorporation.com
Plastic Pallet Systems• AIAG and global footprints drive standardization
• Sizes: 45x48• 32x30 / 32x38 / 45x54 / 45x56 / 45x58 / 45x60 / 48x57 / 48x60 / 48x62• Metric also available
• Creates unit load efficiency (top frames, seat belt systems, etc.)• Simplifies inspection processes for international shipments• Optimizes transportation
![Page 16: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/16.jpg)
16
Property of ORBIS Corporation | www.orbiscorporation.com
StakPak Weight Loads
![Page 17: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/17.jpg)
17
Property of ORBIS Corporation | www.orbiscorporation.com
Pallet Nestable Style:• SP484506-SF is TOYOTA Code
• 45x48 SFP Pallet Blk is ORBIS Code
• Process: Thick wall structural foam (low pressure injection) molding
• 4,000 lb. dynamic capacity
• 30,000 lb. static capacity
• Pallet weight: 37 lbs.
• Space savings in warehouse due to nesting when empty
• Lighter weight allows for more product weight on truck
• Options for hot stamp, labels (RFID)
![Page 18: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/18.jpg)
18
Property of ORBIS Corporation | www.orbiscorporation.com
Top Cap Nestable Style:• SL484503 is TOYOTA Code
• 45x48 MP3 Topcap CISC Blk PE is ORBIS Code
• Process: High pressure injection molding
• Designed to interlock with the legs of nestable pallets and many bulk bases
• Broad compatibility accommodates maximum trailer efficiency
• Compatible with StakPak and Hand Held Folding Containers
• Options: Vinyl labels, identification plates, hot stamps, seat belt buckles
![Page 19: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/19.jpg)
19
Property of ORBIS Corporation | www.orbiscorporation.com
• BulkPak containers in the market– Sizes: 30x16, 32x30, 40x48, 48x45, 56x48, 62x48,
64x48, 65x48, 70x48, 78x48– Weight capacities up to 2,000 lbs.
• Fabrication options available• Manufacturing locations
– Bardstown, KY– Georgetown, KY– Urbana, OH– Menasha, WI– Silao, Mexico
Heights;25”34”50”
![Page 20: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/20.jpg)
20
Property of ORBIS Corporation | www.orbiscorporation.com
20
53’ truckload capacity –208 collapsed bins 78 assembled bins, 26 positions
SK454834-4DL TOYOTA Code; 4 DoorSK454834-2D48H TOYOTA Code; 2 Door 48”
![Page 21: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/21.jpg)
21
Property of ORBIS Corporation | www.orbiscorporation.com
HDMP Features and BenefitsWrap around geometry, more durable for stacking, compression, high impacts
Panel retention clips for easy panel removal. Safe and fast repair, no tools required.
53’ truckload – 252 collapsed bins per truckload, 28 positions
Robust two-piece spring loaded latches support safe handling
Many areas for identification
One piece molded-in perimeter stringer
Welded base plate –increase base strength
Corrugations in sidewalls –increase strength
Durable articulating door hinge allows for quick installation
SK454834-2D48 TOYOTA Code; 2 Door 48”Also available in 25” & 27” heights
![Page 22: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/22.jpg)
22
Property of ORBIS Corporation | www.orbiscorporation.com
![Page 23: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/23.jpg)
23
Property of ORBIS Corporation | www.orbiscorporation.com
Right Sizing Opportunity• Conversion from inefficient
alternative packaging– Underutilized 3230 bulk– Steel/wire baskets– Expensive welded bulk
containers– Wooden crates– One way expendable packaging
• First molded half size 3230 container with ability to present short side to the assembly line.
Underutilized Example 3230
Right Sizing Example
![Page 24: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/24.jpg)
24
Property of ORBIS Corporation | www.orbiscorporation.com
Design ComparisonThick Wall Part Design
“Structural Foam”• Strength: Best for high loads,
combines a resilient core with a hard surface
• Impact: Will “chunk” off plastic at high forces, maintains shape at low forces without deformation
• Weight: Best for heavy loads• Warp/Stress: Less warp, less
molded in stress• Standard Applications: Bulk Bins
& pallets
Thin Wall Part Design“High Pressure”
• Strength: Best for lower loads• Impact: Will “pierce” plastic at
high forces, deforms at lower forces
• Weight: Best for light loads• Warp/Stress: Increased warp,
molded in stress• Standard Applications:
Handheld Totes & Top Caps
![Page 25: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/25.jpg)
25
Property of ORBIS Corporation | www.orbiscorporation.com
• OPTE MAX analyzes part math data and arranges products in the most efficient pattern & orientation
• This tool allows our engineers to quickly determine the optimal method for packaging simple to complex parts in standard or custom containers
• With the ability to deliver rapid results, our engineers are able to evaluate several options and deliver alternatives that work best for our customer’s supply chain
OPTE MAX
BC
![Page 26: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/26.jpg)
26
Property of ORBIS Corporation | www.orbiscorporation.com
Optimizing parts in containers
Uses part math data & we select from the library of standard containers to optimize cube utilization
• ORBIShield™ dunnage/part separation
• Pattern load• Random bulk load
OPTE MAX™
BC
Video Link!
![Page 27: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/27.jpg)
27
Property of ORBIS Corporation | www.orbiscorporation.com
Optimizing parts in containers
Uses part math data & we select from the library of standard containers to optimize cube utilization
• ORBIShield™ dunnage/part separation
• Pattern load• Random bulk load
OPTE MAX™
BC
Video Link!
![Page 28: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/28.jpg)
28
Property of ORBIS Corporation | www.orbiscorporation.com
Optimizing parts in containers
Uses part math data & we select from the library of standard containers to optimize cube utilization
• ORBIShield™ dunnage/part separation
• Pattern load• Random bulk load
OPTE MAX™
BC
Video Link!
![Page 29: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/29.jpg)
29
Property of ORBIS Corporation | www.orbiscorporationProperty of ORBIS Corporation | www.orbiscorporation.com
OPTE MAX™
• Standard report– Part information– Container type– Parts/container– Weights & dimensions
(metric)– 4 views
• Front
• Top
• Side
• Isometric
BC
![Page 30: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/30.jpg)
30
Property of ORBIS Corporation | www.orbiscorporation.com
Real-world application exercise
• An opportunity to go & see some actual packaging applications– Review current part packaging– How could it be done differently & why?
CE
![Page 31: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/31.jpg)
31
Property of ORBIS Corporation | www.orbiscorporation.com
ORBIS Custom Design Inputs
CE
Design Requirements
Materials
Pack Density
![Page 32: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/32.jpg)
ORBIShield
![Page 33: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/33.jpg)
33
Property of ORBIS Corporation | www.orbiscorporation.com
ORBIS Standard Materials
![Page 34: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/34.jpg)
34
Property of ORBIS Corporation | www.orbiscorporation.com
ORBIS Standard Materials
![Page 35: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/35.jpg)
35
Property of ORBIS Corporation | www.orbiscorporation.com
Standard Rigid MaterialsBlack Plastic Corrugate
• 2mm, 3mm, 4mm, 5mm, 6mm, 8mm & 10mm
• Can be laminated for Class A surface protection.
EFB 2H EFB SHD
HDPE TRI Laminate (Con-Pearl) Proluxe
• Shock absorbing properties and Class-A part protection
• Good for heavy parts• Lightweight foam
• Good for oily applications• Powertrain parts, gear
parts and metal rack dunnage
• Ideal for divider sets, solid plastic sheet that helps maximize cube utilization
• Ideal for use with washing systems
• Non-directional structure for improved strength over corrugated material
• Ideal for horizontal dividers in side-loading dunnage
• Can bend and flex: bridges gap between rigid and fabric divider sets
• Painted components • Chrome trim, headlamps and tail
lamps
![Page 36: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/36.jpg)
36
Property of ORBIS Corporation | www.orbiscorporation.com
Standard Laminate MaterialsTYVEK Brushed Poly Spuntex
Edge ProtectionTYVEK Brushed PolyBlue Spuntex
• Protection for class A surfaces and other abrasion sensitive parts
• Requires a second structure support such as PVC
• Protection for class A surfaces and other abrasion sensitive parts
• Protection for class A surfaces and other abrasion sensitive parts
Softshield Sealed Edge
Microtex
• Protection for class A surfaces, similar to Evolon
![Page 37: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/37.jpg)
37
Property of ORBIS Corporation | www.orbiscorporation.com
Standard Fabric MaterialsSoftshield
• Soft finish protects certain Class A surfaces, heat resistant dunnage bag, pouches and divider sets
PVC TYVEK
Clear PVC Brushed
• 13oz & 18oz• Protection for non class A
surfaces
Protection for Class A surfaces and other abrasion sensitive parts
• 13oz, 18oz, 30oz• Used as cover, curtain or back
sheet. • Allows to see though the insert
but still have protection
• Protection for Class A surfaces and other abrasion sensitive parts
• 15oz 1 side and 2 side
Propac
• Tri-laminated non-woven fabric
• Class A 2 sided• Ideal for top loading
![Page 38: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/38.jpg)
38
Property of ORBIS Corporation | www.orbiscorporation.com
Standard Foam MaterialsXLPE Foam
• Non-abrasive with excellent shock/vibration protection
• Cushion Packing• Class A surface protection
1.7# Reclaim PE Foam
• Lightweight, low abrasive foam with good shock/vibration protection
• Foam pads
• Durable, resilient, low-abrasive with excellent shock protection
• Foam pads for heavier items
• Streamlined fabrication with one material and one mold. No assembly or finishing needed
• Some designs do not require totes• Parts with complex cavity shapes and contours• Electronic part protection
Molded EPP Foam
![Page 39: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/39.jpg)
Custom Thermoforming
![Page 40: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/40.jpg)
40
Property of ORBIS Corporation | www.orbiscorporation.com
Thermoforming Benefits• Durable, recyclable and returnable • Less expensive tooling than injection molding• More durable than foam and molded pulp• Optimize pack density
– Multiple layers in a tote/bulk container– Multiple parts per tray
• ORBIS value and one stop shop
![Page 41: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/41.jpg)
41
Property of ORBIS Corporation | www.orbiscorporation.com
ORBIS Thin Gauge Thermoforming-Urbana, OH
• HIPS, ESD HIPS, HMWPE, and ABS up to - .125 gauge• Maximum of 5 inch draw
• PET Material up to .060 on the Lyle; 2.5 inches of draw• Maximum tray size of 30” x 66”• Reusable trays for totes & expendable trays
Thin gauge reusable tray Thin gauge reusable trays for a 32”x30” container
Thin gauge tray (High volume)
![Page 42: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/42.jpg)
42
Property of ORBIS Corporation | www.orbiscorporation.com
ORBIS Thick Gauge Thermoforming- Menasha, WICapability to run a tray mold size up to 76” x 115”. • 45x48 Pallet for containers • Can form as thin as .100” and as thick as .400”. • HMWPE and HIPS materials are most commonly used• Single-sheet thermoform only• Minimal sample capabilities
.300 gauge tray for 4548 container .200 gauge tray for 2422 Tote
![Page 43: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/43.jpg)
43
Property of ORBIS Corporation | www.orbiscorporation.com
Typical Uses
Air bags
Turbo, Inlet/Outlet tubes Brake Controllers- ESDCoil Springs
Door Handles Transmission Actuators
![Page 44: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/44.jpg)
AdjustaPak
![Page 45: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/45.jpg)
45
Property of ORBIS Corporation | www.orbiscorporation.com
![Page 46: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/46.jpg)
46
Property of ORBIS Corporation | www.orbiscorporation.com
Key Features• Easy & Safe Line Side Part Presentation
• Unique Rail System – Rust Resistant– East Sliding for Life of the Product
• Configurable Heights and Layers
• Reusability of modular system in different bins
![Page 47: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/47.jpg)
Metal Solutions
![Page 48: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/48.jpg)
48
Property of ORBIS Corporation | www.orbiscorporation.com
Metal Manufacturing Locations
Leon, Mexico Greenville, SCAverage 1,000 units per week*
Average 750 unitsper week*
In house Design and Prototype
In house Design and Prototype
Average lead time 6-8 weeks
Average lead time 6-8 weeks
*dependent on complexity and design of metal solution
![Page 49: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/49.jpg)
49
Property of ORBIS Corporation | www.orbiscorporation.com
WIP with Stacking
Truss Base
Low Profile
ORBIS Metal Solutions
![Page 50: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/50.jpg)
50
Property of ORBIS Corporation | www.orbiscorporation.com
Walk On48” x 96” w/ foam
Pin Pallet*MX only
Metal Bins*MX only
ORBIS Metal Solutions
![Page 51: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/51.jpg)
51
Property of ORBIS Corporation | www.orbiscorporation.com
DunnageDisaster!• Original packaging
directive was to provide best protection for components
• Modified position once program packaging cost was tallied and compared to budget
BC
![Page 52: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/52.jpg)
52
Property of ORBIS Corporation | www.orbiscorporation.com
Tier One Seating Manufacturer
• Several parts to review– Side shield R1 R4– Recliner cover R1 R5– 2nd row shield R1 R5– Handle bezel R1 R5– 3rd row 60% cover R1 R4
BC
![Page 53: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/53.jpg)
53
Property of ORBIS Corporation | www.orbiscorporation.com
Side Shield - R1
BC
![Page 54: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/54.jpg)
54
Property of ORBIS Corporation | www.orbiscorporation.com
Side Shield - R4Reductions:• Basepad (foam)• U-Pad
construction (pcorr on the bottom)
• Lamination• Stitched Edging
BC
![Page 55: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/55.jpg)
55
Property of ORBIS Corporation | www.orbiscorporation.com
Recliner Cover – R1
BC
![Page 56: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/56.jpg)
56
Property of ORBIS Corporation | www.orbiscorporation.com
Recliner Cover – R5Changes:• Maximized number
of cells in container• Modified flute
direction for better yield
Reductions:• Reduced divider
height• Reduced lamination
to only lengthwise in cells
• Removed basepad(foam)
• Removed stitching
BC
![Page 57: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/57.jpg)
57
Property of ORBIS Corporation | www.orbiscorporation.com
2nd Row Shield – R1
BC
![Page 58: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/58.jpg)
58
Property of ORBIS Corporation | www.orbiscorporation.com
2nd Row Shield – R5Reductions:• Stitched Edging
BC
![Page 59: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/59.jpg)
59
Property of ORBIS Corporation | www.orbiscorporation.com
Handle Bezel – R1
BC
![Page 60: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/60.jpg)
60
Property of ORBIS Corporation | www.orbiscorporation.com
Handle Bezel – R5Reductions:• Reduced cell
height• Removed
stitching• R4 – tested
removing all lamination – had to add it back for R5
BC
![Page 61: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/61.jpg)
61
Property of ORBIS Corporation | www.orbiscorporation.com
3rd Row 60% Cover – R1
BC
![Page 62: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/62.jpg)
62
Property of ORBIS Corporation | www.orbiscorporation.com
3rd Row 60% Cover – R4Changes:• Reduced quantity
of cells – 2 parts per cell now
Reductions:• Removed
stitching• Removed
lamination• Removed
basepad (foam)
BC
![Page 63: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/63.jpg)
63
Property of ORBIS Corporation | www.orbiscorporation.com
Dunnage Materials Change Study
• The following exercise involved changing the materials used for a packaging project, not the structural design or the purchased quantity of packaging
CE
![Page 64: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/64.jpg)
64
Property of ORBIS Corporation | www.orbiscorporation.com
Dunnage Materials Selection
CE
![Page 65: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/65.jpg)
65
Property of ORBIS Corporation | www.orbiscorporation.com
Dunnage materials selection
CE
![Page 66: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/66.jpg)
66
Property of ORBIS Corporation | www.orbiscorporationProperty of ORBIS Corporation | www.orbiscorporation.com
Packaging Applications • Headlamp• Tail Lamp• Fog Lamp Cover• Steering Wheel• HVAC• Starter Assembly• AC Compressor• Radio / Navi• Interior Trim• Side Door Glass• Radiator/Cooling Module• Mud Guard• Muffler• Window Regulator
• I/P Inner• Roof Rail• Front Wiper Assembly• Fuel & Brake Lines• Brake Booster• I/P Upper• Tonneau Cover• Grille Assembly• Wire Harness• Seat Belts• Trunk Floor Mat• Bumper Guard• Spoiler
CE
![Page 67: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/67.jpg)
67
Property of ORBIS Corporation | www.orbiscorporation.com
Headlamp Packaging
Material Handling - Benchmarking
Metal / Maximus Metal with TF Trays EPP Tote
Highlights:• Multi component dunnage
Highlights:• Single component dunnage• Line side savings in flow
rack system• System cost reduction• Trailer efficiencies
Highlights:• Two component dunnage• Cost reduction for high
volume projects
![Page 68: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/68.jpg)
68
Property of ORBIS Corporation | www.orbiscorporation.com
Tail lamp Packaging
Material Handling - Benchmarking
Metal / Maximus Metal with TF Trays EPP Tote / Tray
Highlights:• Multi component dunnage
Highlights:• Single component dunnage• Line side savings in flow
rack system• System cost reduction• Trailer efficiencies
Highlights:• Two component dunnage• Cost reduction for high
volume projects
![Page 69: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/69.jpg)
69
Property of ORBIS Corporation | www.orbiscorporation.com
Fog Lamp Cover Packaging
Material Handling - Benchmarking
Bulk Bin w/ Rigid Tote w/ Rigid Tote w/ Textile
Highlights:• Bulk Pak w/ Rigid: low cost solution utilizing tilt or turn table
to achieve ergonomic requirements
• Tote: preferred for JIT supply chain operations; increased pack efficiency when utilizing part nest
Rack or Bin w/ PC Tote
![Page 70: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/70.jpg)
70
Property of ORBIS Corporation | www.orbiscorporation.com
Steering Wheel Packaging
Material Handling - Benchmarking
Metal Tote w/ Rigid Bulk Bin w/ Rigid
Highlights:• Tote w/ Rigid: standard Toyota and Subaru (4) QPC tote
design
• AdjustaPak: ergonomic, cost and line side efficiencies
AdjustaPak
![Page 71: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/71.jpg)
71
Property of ORBIS Corporation | www.orbiscorporation.com
Steering Wheel Packaging – 300K Annual Volume
Cost Savings Analysis
Tote w/ Rigid (Current) Bulk Bin w/ Rigid AdjustaPak
Highlights:
Footprint: 24x15x18Pack Density: 4Investment: $561KPKG $ / Unit: $9.4Logistics $ / Unit: $2.38
Highlights:
Footprint: 48x45x34Pack Density: 48Investment: $330KPKG $ / Unit: $5.54Logistics $ / Unit: $1.5
Year 1 Savings: $491K
Highlights:
Footprint: 48x45x50Pack Density: 63Investment: $320KPKG $ / Unit: $5.38Logistics $ / Unit: $1.5
Year 1 Savings: $502K
![Page 72: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/72.jpg)
72
Property of ORBIS Corporation | www.orbiscorporation.com
HVAC Packaging
Material Handling - Benchmarking
Metal w/ TF Tray Shelf Metal Solution Metal w/ EPP Tray
Highlights:• Rack w/ EPP Trays: gravity assist conveyance into line side
roller rack
• Clamshell: maximum part quality
Clamshell
![Page 73: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/73.jpg)
73
Property of ORBIS Corporation | www.orbiscorporation.com
Starter Assembly Packaging
Material Handling - Benchmarking
Thermoformed Tray Tote w/ Die Cut Foam
Highlights:• Low cost solution for high
volume applications• In-line, sequence, or sub-
assembly space available with 2nd X, Y for consumed
Highlights:• Preferred packaging for JIT
supply chain operations
EPP Tote
Highlights:• Vertical part nest
potentially increases parts per unit load and trailer efficiencies
![Page 74: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/74.jpg)
74
Property of ORBIS Corporation | www.orbiscorporation.com
A/C Compressor Assembly Packaging
Material Handling - Benchmarking
Metal w/ TF Tray Tote w/ Rigid Thermoformed Tray
Highlights:• Multi tier shelf rack
Highlights:• Cost reduction vs. rack if
line side space allows for one additional footprint
Highlights:• QPC of 2 achieved utilizing
a 16x15 tote footprint• QPC of 1 in 12x15 footprint• Small lot tote to support
line side flow rack system
![Page 75: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/75.jpg)
75
Property of ORBIS Corporation | www.orbiscorporation.com
Radio / Navi Packaging
Material Handling - Benchmarking
Bulk Bin w/ Rigid Tote w/ Rigid Tote w/ Die Cut Foam
Highlights:• Bulk Pak w/ Rigid: low cost solution utilizing line side tilt or
turn table to achieve ergonomic requirements• Tote: preferred for JIT supply chain operations; increased
pack efficiency when utilizing part nest• EPP Tote: low cost packaging solution vs. tote
EPP Tote
![Page 76: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/76.jpg)
76
Property of ORBIS Corporation | www.orbiscorporation.com
Interior Trim Packaging
Material Handling - Benchmarking
Bulk Bin w/ Rigid Metal w/ Textile OPTE Tote
Highlights:• Bulk Pak w/ Rigid: line
side tilt or turn table -ergonomics
• OPTE Tote: Collapsible for supply chain efficiencies
Tote w/ RigidRack or Bin w/ PC Totes
![Page 77: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/77.jpg)
77
Property of ORBIS Corporation | www.orbiscorporation.com
Side Door Glass Packaging
Material Handling - Benchmarking
Bulk Bin w/ Rigid Walk In Metal Solution
Highlights:• Total system cost reduction• 1.7:1 collapsible for
warehouse and outbound freight efficiencies
Highlights:• Common S/D glass
packaging
![Page 78: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/78.jpg)
78
Property of ORBIS Corporation | www.orbiscorporation.com
Radiator Packaging
Material Handling - Benchmarking
Bulk Bin w/ Rigid Metal
Highlights:• System cost reduction• Potential for collapsible
container for improved supply chain efficiencies
Highlights:• Line side presentation
![Page 79: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/79.jpg)
79
Property of ORBIS Corporation | www.orbiscorporation.com
Mud Guard Packaging
Material Handling - Benchmarking
Metal Bulk Bin
Highlights:• Line side presentation to
Associate / Operator
Highlights:• No interior dunnage• Improved supply chain
efficiencies – logistics and warehouse operations
![Page 80: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/80.jpg)
80
Property of ORBIS Corporation | www.orbiscorporation.com
Muffler Packaging
Material Handling - Benchmarking
Metal Bulk Bin Steel Bin
Highlights:• Parts immobilized to
ensure part quality
Highlights:• Cost reduction, non-chrome tipped mufflers
• Chrome tipped, add base pad w/ foam rails per layer
![Page 81: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/81.jpg)
81
Property of ORBIS Corporation | www.orbiscorporation.com
Window Regulator Packaging
Material Handling - Benchmarking
Tote Tote w/ Rigid Tote w/ Rigid
Highlights:• Tote w/ Rigid: Engineered cell design increases supply chain
efficiencies
• Rack / Maximus: improved manufacturing efficiencies for Tier-1 suppliers
Metal / Maximus
![Page 82: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/82.jpg)
82
Property of ORBIS Corporation | www.orbiscorporation.com
I/P Inner Packaging
Material Handling - Benchmarking
Metal Walk On Metal Metal w/ EPP Trays
Highlights:• Part contamination – dirt /
debris
Highlights:• Improved supply chain
efficiencies thru part nest in EPP trays
Highlights:• Walk in rack feature
![Page 83: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/83.jpg)
83
Property of ORBIS Corporation | www.orbiscorporation.com
Roof Rail Packaging
Material Handling - Benchmarking
Shelf Metal Solution Bin w/ TF Rails Metal w/ EPP Tray
Highlights:• Bin w/ TF Rails: low cost packaging option in high volume
part applications
• AdjustaPak: low cost packaging option with improved line side ergonomics
AdjustaPak
![Page 84: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/84.jpg)
84
Property of ORBIS Corporation | www.orbiscorporation.com
Front Wiper Assembly Packaging
Material Handling - Benchmarking
Metal / Maximus Tote w/ Rigid Thermoformed Tray
Highlights:• TF Trays: low cost option when additional line or sequencing
area footprint available for empty packaging return
• AdjustaPak: low cost option with improved line side ergonomics
AdjustaPak
![Page 85: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/85.jpg)
85
Property of ORBIS Corporation | www.orbiscorporation.com
Brake Line Packaging
Material Handling - Benchmarking
Metal Solution Steel Bin Cantilever Arm Metal Solution
Highlights:• Improved part load /
unload• No part to part tangle
Highlights:• Improved part load /
unload
Highlights:• Low cost option• Requires plastic bags to
minimize part to part tangle
![Page 86: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/86.jpg)
86
Property of ORBIS Corporation | www.orbiscorporation.com
Brake Booster Packaging
Material Handling - Benchmarking
Shelf Metal Solution Shelf Metal Solution Thermoformed Trays
Highlights: Highlights:• Low cost option when
additional line, sequencing or chassis area footprint available for empty packaging return
Highlights:• Improved load / unload
![Page 87: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/87.jpg)
87
Property of ORBIS Corporation | www.orbiscorporation.com
I/P Upper Packaging
Material Handling - Benchmarking
Metal or Maximus w/ Textile
Metal or Maximus w/ Rigid
AdjustaPak
Highlights:• Rack / Maximus: line side presentation; potential for in-line
sequencing
• AdjustaPak: reduced unit cost and packaging investment
Metal or Bin w/ PC Tote
![Page 88: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/88.jpg)
88
Property of ORBIS Corporation | www.orbiscorporation.com
Tonneau Cover Packaging
Material Handling - Benchmarking
Metal w/ Textile Metal w/ Rigid AdjustaPak
Highlights:• Line side presentation
Highlights:• Low cost option with
improved line side ergonomics
Highlights:• Reduced interior dunnage
cost vs. textile
![Page 89: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/89.jpg)
89
Property of ORBIS Corporation | www.orbiscorporation.com
Grille Assembly Packaging
Material Handling - Benchmarking
Metal / Maximus Metal or Bin w/ PC Totes Tote
Highlights:• Sequence to line side
operations
Highlights:• Preferred packaging for JIT
supply chain operations when part conveyed to production line
Highlights:• Reduced packaging spend
and packaging investment
![Page 90: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/90.jpg)
90
Property of ORBIS Corporation | www.orbiscorporation.com
Wire Harness Packaging (MX to US)
Material Handling - Benchmarking
Corrugated Tote OPTE Tote
Highlights:• Increased part piece price
– packaging / SGA
Highlights:• Total system cost reduction• Collapsible for supply chain
efficiencies - warehouse and logistics
Highlights:• Part piece price reduction -
expendable to returnable conversion
• Environmental sustainability
![Page 91: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/91.jpg)
91
Property of ORBIS Corporation | www.orbiscorporation.com
Seat Belt Packaging
Material Handling - Benchmarking
Tote w/ Rigid Tote w/ Textile Tote
Highlights:• Standard seat belt
packaging option
Highlights:• Expendable sleeve on
buckle• No dunnage opportunities
– seat belt type -> A vs. B Class
Highlights:• Improved part to part nest
in flexible dunnage
![Page 92: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/92.jpg)
92
Property of ORBIS Corporation | www.orbiscorporation.com
Trunk Floor Mat Packaging
Material Handling - Benchmarking
Bulk Bin Rack / Maximus
Highlights:• Class A to A, B to B for part
quality• System cost reduction• Supply chain efficiencies -
warehouse and logistics
Highlights:• Line side or sequence area
presentation and ergonomics
![Page 93: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/93.jpg)
93
Property of ORBIS Corporation | www.orbiscorporation.com
Bumper Guard Packaging
Material Handling - Benchmarking
Walk In Metal Maximus w/ Rigid AdjustaPak
Highlights:• Walk in rack
Highlights:Low cost option with improved line side ergonomics
Highlights:• Line side presentation • In-line sequencing
opportunity
![Page 94: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/94.jpg)
94
Property of ORBIS Corporation | www.orbiscorporation.com
Spoiler Packaging
Material Handling - Benchmarking
Metal Maximus w/ Rigid Metal w/ Textile
Highlights:• Walk in rack with foam
finger dunnage to improve part to part nest
Highlights:• Improved part to part nest
vs. rigid when spoiler has curvature
Highlights:• Line side presentation • In-line sequencing
opportunity
![Page 95: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/95.jpg)
95
Property of ORBIS Corporation | www.orbiscorporation.com
Fabric OPTE Tote Returnable SystemsQuality:
• Packs utilize only the best fabrics, typically Tyvek, to come in contact with the part. (Brushed Poly/Headliner also good options)
• Each cell is designed to limit the movement in transit, thus reducing risk of damage
• Previous projects have shown a substantial reduction in quality issues compared to expendable packaging.
![Page 96: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/96.jpg)
96
Property of ORBIS Corporation | www.orbiscorporation.com
OPTE Tote Returnable Systems continued…OPTE Tote Review:1. Our systems are designed to reduce shipping cost, improve quality, and
reduce handling and line side space needed. 2. Estimated savings show a pay off in year 1 and a total savings of
$1,639,941.35 over 5 years. Tier 1 conversion.
![Page 97: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/97.jpg)
97
Property of ORBIS Corporation | www.orbiscorporation.com
ORBIS AdjustaPak– Fabric pouches• Modular design, easily engineered to be right sized to almost any Bulk Bin.• Stand alone assembly, does not need to be attached to the bulk bin, easily drops in, to
save time and reduce cost.
![Page 98: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/98.jpg)
98
Property of ORBIS Corporation | www.orbiscorporation.com
Rack Solutions – EPP Trays
• EPP inserts molded to the part’s shape provides superior part holding capability.
• Combined with a collapsible rack provides 2:1 return ratio, and significant supply chain savings.
![Page 99: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/99.jpg)
99
Property of ORBIS Corporation | www.orbiscorporation.com
Instrument Panel Rack cont’d
![Page 100: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/100.jpg)
100
Property of ORBIS Corporation | www.orbiscorporation.com
Commodity:Fender Assembly
Container:HD4845-50 Single Entry Maximus w/ 6 “Dresser Drawers” & Protective Vinyl Curtain
Materials Used:4mm Blue Plastic Corrugated w/ Solid HDPE Drawer Rails (EFB-2H, Respironics solution)
Maximus Solutions – PCorr Trays (EFB-2H option)
![Page 101: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/101.jpg)
101
Property of ORBIS Corporation | www.orbiscorporation.com
• Coating provides the toughest possible protection for heavy or sharp parts.
• Creates a flexible, extremely tough, monolithic membrane with excellent environmental protection against moisture, chemicals & acids.
• Virtually shave-proof; excellent for sharp parts that are sensitive to any shavings from the dunnage.
Maximus Solutions – Utilizing Polyurea Coatings
![Page 102: TMNA Packaging Workshop · • Process: Thick wall structural foam (low pressure injection) molding • 4,000 lb. dynamic capacity • 30,000 lb. static capacity • Pallet weight:](https://reader034.fdocuments.us/reader034/viewer/2022042710/5f60c91a19476f79dc2d995d/html5/thumbnails/102.jpg)
102
Property of ORBIS Corporation | www.orbiscorporation.com
• Sling bag style allows for vertical nesting, optimizes density.
• Angled horizontals allows for increased density in the width direction.
• Fabric hanging bags in general are more suited to nesting parts, and are usually the better choice for longer thinner parts.
Fabric Rack Solutions – Sling bag & Angled cells