7/23/2019 TM 9-1240-315-35 - Periscope M37

1/17

T M 9 - 1 2 4 0 - 3 1 5 - 3 5

D E P A R T M E N T O F T H E A R M Y T E C H N I C A L M A N U A L

F I E L D A N D D E P O T M A I N T E N A N C E M A N U A L

P E R I S C O P E M 3 7

Headquarters, Department of the Army, Washington , D.C.

14 J anuary 1963

C H A P T E R

Se c t i on

C H A P T E R

C H A P T E R

Se c t i on

C H A P T E R

Se c t i on

C H A P T E R

A P P E N D I X .

1.

I .

I I.

2.

3.

I.

I I .

4.

I .

II .

5.

I NT R O D U C T I O N

G e n e r a lScope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance allocation and parts . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Forms, records, and reports. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Descr ip t ion and da ta

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T O O L S A ND E Q U I P M E NT

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Common tools and equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Special tools and equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . .

I N S P E C T I O N

G e n e r a l

Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Forms and reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Modification work orders.. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inspect ion in the hands of t roops and in ordance main tenance shops

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R E P A I R A N D O V E R H A U L

G e n e r a l

Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Maintenance technique. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Repa i r and overhaul o f per i scope M37

Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disassembly and assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Final inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P R O C E S S I N G A N D P A C K A G I N G

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Optical components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P a r a g r a p h

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

1617

18

19

20

21

22

23

REFERENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P a g e

2

2

2

2

3

3

6

6

6

7

7

7

7

7

8

9

9

9

9

9

10

11

11

12

1

7/23/2019 TM 9-1240-315-35 - Periscope M37

2/17

CHAPTER 1

INTRODUCTION

Section I. GENERAL

1. Scope

a. This manual contains instructions forthe field and depot maintenance of peri-

scope M37.b. These instructions are used in con-

junction with and are supplementary tothose in the operators or organizationalmaintenance manual. Instructions for op-eration, lubrication, and operators main-tenance are in TM 9-2350-215-10. Instruc-tions for maintenance including installationand removal procedures, as well as testsand adjustments after installation, are inTM 9-2350-215-20. It maybe necessary torefer to these manuals for complete pro-cedures.

c. A description of the item, inspectionprocedures, and repair and overhaul oper-ations are presented in this manual.

d. The appendix contains a list of currentreferences, including supply and technicalmanuals, forms, and other available pub-lications applicable to periscope M37.

e. This first edition is being publishedin advance of complete technical review.Any errors or omissions will be forwardedon DA Form 2028 direct to the CommandingOfficer, Frankford Arsenal , ATTN:SMUFA-31OO, Philadelphia 37, Pa.

2. Maintenance Allocation and Parts

a. Field and depot maintenance respon-sibilities are limited to those specified inthe maintenance allocation chart in TM9-2350-215-20.

b. Repair parts authorized to field anddepot maintenance units are listed in TM9-1240-315-35P. Unlisted parts will besupplied, if available, when complete jus -tification is included.

3. Maintenance Techniques

a. The maintenance technique, IROAN

(Inspect and Repair Only As Necessary)will be used to

-restore

-

serviceable condition.

2

this materiel to

b. IROAN is the systematic isolation andremedy of a malfunction or defective com-ponent through tests, diagnosis, and sin-

gular repair. No segment of the materiel isdisassembled before the definite need fordisassembly has been established.

4. Forms, Records, and Reports

a. General. Responsibility for the pro-per execution of forms, records, and re -ports rests upon the commanding officersof all units maintaining this equipment.However, the value of accurate recordsmust be fully appreciated by all personsresponsible for their compilation, main-tenance, and use. Records, reports, and

authorized forms are normally utilizedto indicate the type, quantity, and conditionof materiel to be inspected, to be repaired,or to be used in repair. Properly executedforms convey authorization and servea record of work performed. The forms,records, and reports establish the workrequired, the progress of the work, andthe status of the materiel upon completionof its repair.

b. Authorized Forms. The forms gen-erally applicable to units maintaining thismateriel are listed in the appendix. Forinstructions on use of these forms, referto FM 9-3 and 9-4. For a listing of allforms, refer to DA Pam 310-2.

c. Field Report of Accidents. The r e -ports necessary to comply with the re-quirements of the Army safety programare prescribed in detail in AR 385-40.These reports are required wheneveraccidents involving injury

-to personnel or

damage to materiel occur.d . Equ ipmen t Improvemen t s Recom-

mendations (EIR's) (formerly Unsatisfac -

tory Equipment Reports). All EIRs willbe in accordance with TM 38-750.

e. Re po rt ing Re ce ipt of De fect ive Ma-terial. All reports will be in accordancewith TM 38-750.

7/23/2019 TM 9-1240-315-35 - Periscope M37

3/17

Section Il. DESCRIPTION AND DATA

5. Description

a. P eriscope M37 (f ig. 1) i s used as avision device in 105-mm gun full trackedcombat tank M60A1. The pins, on either

side of the housing near the cover, act astrunnions for mounting it in the ve-hicle.

b. A s e g m e n t a t t a c h e d o n t h e r i g h tside of the housing (fig. 2) is secured bya knob. Loosening the knob permits theper i scope to b e t i l t ed i n e l eva t i on ordepression. Two windows and two mirrorsare bonded to the plastic body. A housing

containing the body has a crash pad se-cured to the lower end.

6. Data

a. Physical Characteristics.Length (including crash pad). . . . . . 15-1/2 in.

Width (including crash pad) . . . . . . 8-3/4 in.

Depth (including crash pad) . . . . . .3- I 8 in.

Weigh t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 lb

b. Optical Characterstics. T hi s per i -scope is of the solid plastic type, single

power of magnification. Field of view 26degrees vertical and 72 degrees horizon-

ta l . The opt ica l character i s t ics a re notconsidered pertinent beyond the inspectionof the materiel a t t ime of manufacture, inaccordance with MIL-P-46329 (ORD) dated

30 J a nua ry 1962 and /or the a mendm entwhich is to include periscope M37.

3

7/23/2019 TM 9-1240-315-35 - Periscope M37

4/17

F igu r e 1 . Pe r i s cope M37.

4

7/23/2019 TM 9-1240-315-35 - Periscope M37

5/17

l-Ring 5340-281-3605 5Washer MS15795-3132Washer MS15795-310 6Screw 5305-081-71933Knob 5355-081-7191 7Ring 5830354Washer 5310-638-3633 8Segment 8635080

Figure 2. Periscope M37 par tial explod ed view . 5

7/23/2019 TM 9-1240-315-35 - Periscope M37

6/17

CHAPTER 2

TOOLS AND EQUIPMENT

7. General equipment having general application to

Tools and equipment over and abovethis materiel are authorized for issue by

those available to the using organizationtables of allowance and tables of organi -

are supplied to field and depot maintenance zat ion a nd equipment.units for repair and overhaul of periscopeM37. 9. Special Tools and Equipment

8. Common Tools and EquipmentNo special tools and equipment are au-

thorized or required for field and depot

Standard and commonly used tools and maintenance operations.

6

7/23/2019 TM 9-1240-315-35 - Periscope M37

7/17

CHAPTER 3

INSPECTION

Section I. GENERAL

10. Scope

This chapter provides specific instruc-tions for the technical inspection by Ord-nance maintenance personnel of periscope

M 37 either in t he ha nds of tr oops or whenreceived for repair in an Ordnance fieldor depot maintenance shop.

11. Purpose

a . Inspection in the Hands of Troops.(1)

(2)

(3)

(4)

(5)

(6)(7)

Insure tha t preventive maintenanceservices are being performed andare effective.

Ascertain the serviceability, com-pl e teness , o r rea d i ness o f Ord-

nance mater ie l in the hands oftroops.Render any necessary assistanceto the using organization.

Provide instructions for organi-zat ional suppl y a nd ma intenance.Determine the most prevalent de-ficiencies in maintenance of ma-teriel .Anticipate unusual supply demands.

Make a record of condition of ma-

teriel in the hands of troops.b. Inspection in the Repair Shop.

(1) Determine the nature of the re-quired repair.

(2)

(3)

(4)

Determine the extent of repair re-quired to return the materiel toserv i cea b i l i t y i n o rder tha t i t sdisposition may be planned.Assure that work in process isbeing performed properly.

Insure that work performed com-pl ies ful ly wi th approved s tand-a r d s .

12. Forms and Reports

Authorized forms and reports for tech-nical inspections by field and depot main-tenance personnel are 1 is t e d in theappendix. Preventive maintenance logs, ifavailable, will be examined to determinethe maintenance background of the ma-te r i e l .

13. Modification Work Orders

Al l urgent modi f i ca t i on work ordersmust have been applied. Check to see thatno unauthorized a l tera t ions have beenmade, and tha t no work beyond the a uthor-

ized scope of the unit is being attempted.Check DA Pa m 310-4 and the current mod-if icat ion work order f i les to determineapplicable modification work orders.

Section Il. INSPECTION IN THE HANDS OF TROOPS

AND IN ORDNANCE

14. General

This section provides specific instruc-tions for the technical inspection by ord-nance field and depot m a i n t e n a n c e

personnel of periscope M37 in the handsof troops, or inspection prior to disas -sembly when received for repair in field

MAINTENANCE SHOPS

or depot maintenance shops. In general,if the periscope is complete and performsits intended function properly, if all mod-ification work orders, classified as urgenthave been completed the periscope M37may be considered serviceable. Inspection

7

7/23/2019 TM 9-1240-315-35 - Periscope M37

8/17

in the repair shops upon receipt of themateriel turned in for repair determinesthe cause of unserviceability, the amountof work required to return the materielto serviceability, and the amount of sup-plies, parts, or assemblies necessary toaccomplish the repairs.

15. Inspection

a. Examine the periscope to insure allcomponent parts are present. Refer toTM 9-1240-315-35P.

b. The general appearance of the peri-scope will indicate the condition and thecare and treatment it has received. Checkfor damaged, cracked, or dented surfaces,bent or broken parts, moisture and cor-rosion, and other evidence of damage ormisuse that might indicate a need forrepair.

c. The mounting surfaces shall not bedamaged in any way that would prevent the

proper seating of the periscope in itsadapters.d. The crash pad shall not be deterio-

rated, cut, or torn. It should be bondedsecurely to the housing.

e. The metal cover shall not be damagedin any way that would cause leaks. Inspectwelds for cracks or breaks.

f. The clamping knob on the periscopeshall rotate freely on the stud, and holdthe periscope securely when tightenedagainst the segment.

g. The screw on the segment should op-erate smoothly with normal hand pressurewhen the clamping knob is released. Seg-ment shall not be bent or broken.

h. The painted surfaces shall be in-spected for bare spots, chips, or crackswhich expose metal surfaces that couldlead to corrosion. Determine if finishwarrants touchup or complete refinishing.Refer to TM 9-213.

i . The metal housing on the periscopeshall not be bent or twisted, and thereshall be no undue looseness between thehousing and the periscope body. Inspect

welds for cracks or breaks.j. When viewing through the periscope

the r e shall be no objectionable dirt,smears, scratches, digs, condensate, fun-gus growth, chips, or fractures.

Not e: Reject ion shal l be based only on those de-

f e c t s w h i c h a r e a p p a r e n t w h e n t h e p e r i s c o p e i s

used in a manner simulating actual use.

k. The windows and mirrors of the peri-scope shall be firmly cemented and shallshow no signs of separation from theplastic body.

1. The sealing compound, 8030-275-

8110, MIL-S-11031A (ORD), shall show nosigns of deterioration.m. Check organizational repair parts and

equipment for general condition, methodof storage, and procedures for obtainingreplacements.

n. Investigate mechanical and functionaldifficulties that troops may be experienc-ing. Check for determinable causes, suchas inadequate design, poor workmanshipor material, lack of knowledge, misinfor-mation, neglect, or improper storage, orpreservation.

o. Instruct the using personnel in supplyand preventive maintenance procedures ifthe need for such instruction is necessary.

8

7/23/2019 TM 9-1240-315-35 - Periscope M37

9/17

CHAPTER 4

REPAIR AND OVERHAUL

Section I.

16. Scope

This chapter contains specific mainte-nance instructions for field and depot re -pair and overhaul of periscope M37 whenthe equipment does not meet the service-ability inspections. The scope of field anddepot maintenance is determined by thelisting of field and depot maintenance re-pair parts and special tools in TM 9-1240-315-35P and the maintenance allocationchart in TM 9-2350-215-20.

17. Maintenance Technique

Whenever possible repair is to be ac-complished in the vehicle. The mainte-nance technique IROAN, as defined inparagraph 3, will be adhered to.

18. References

a. Gene ra l . TM 9-254 presents thosegeneral maintenance procedures that aremost often encountered in repairing firecontrol materiel. These procedures arepresented as guides to maintenance per-

GENERAL

sonnel in the performance of their duties.Organizational maintenance of the peri-scope is covered in TM 9-2350-215-20.

b. Cleaning and Drying. Optics shall becleaned and dried. Other surfaces shall becleaned by process Cl of MIL-P-l16C anddried as specified in MIL-P-116C.

c. Lubricat ion. Lubricate mounting sur-faces and threaded surfaces with a verylight film of aircraft and instrumentgrease, 9150-261-8298, MIL-G-3278. Lu-brication can be accomplished using a

cloth impregnated with grease. Removeall surplus grease.d. Seal ing. Periscope M37 is sealed

with sealing compound.e. F i na l P ro tec t i ve F i n i sh . All sheet

metal surfaces, requiring touchup or re-painting, are to have finish No. 5.1 andsystem No. 21.5 of MIL-STD-171A (ORD)O. D., color No. 24087 of FED-STD 595.Painting instructions in TM 9-213. MIL-STD-194 (ORD) references finish, system,and color.

N o t e : S u r f a c e s w h i c h r e q u i r e t h i s f i n i s h a r e :cover 8635078 and hous ing 8635085.

Section II.

19. Scope

When component parts

REPAIR AND OVERHAUL OF PERISCOPE M37

Note : The key num bers shown be low in pa ren-theses refer to figure 2.

(fig. 2) do notoperate properly, are missing, or broken

a. Disassembly . Remove 1/4 retaining

they shall be replaced. Optical componentring (1) and 0.281 washer (2), unscrew

parts are not authorized for replacement,knob (3) and remove 3/8 spring washer

repair, or overhaul.(4) and 5/16 washer (5) from studinhous-

ing. Remove l/4-28UNF-2A x 0.87520. Disassembly and Assembly

knurled head screw (6) and 15/32 retain-ing ring (7) and then remove segment (8)

Periscope M37 (fig. 2) will require a from pin and stud.minimum of disassembly and assembly. b . Assemb ly . Replace segment (8) by

9

7/23/2019 TM 9-1240-315-35 - Periscope M37

10/17

p1acing slot over stud and the top 21. Final Inspectionopening o v e r t r u n n i o n p i n , s e c u r e Final inspection is performed after allwith ring (7), insert and tighten screw necessary repair has been completed to(6), pla ce washer (5) and washer insure that the materiel is serviceable(4) on stud, screw on knob (3) and according to the established standards.secure w i t h w a s h e r ( 2 ) a n d r i n g Refer to paragraphs 10 through 15 for(l). detailed inspection procedures.

10

7/23/2019 TM 9-1240-315-35 - Periscope M37

11/17

CHAPTER 5

PROCESSING AND PACKAGING

22. Specifications

Periscope M37 shall be processed and

packed in accordance with levels A, B,and C shown in packaging specificationMIL-F-14619/P8635100, TM 9-200 (boxedmaterial), and TB 9-299/1 (unboxed ma-terial).

23. Optical Components

a. Optics shall be clean e d and dried(para 19b).

b. Cover all windows or optical elementswith at least four thicknesses of nuetrallens tissue and secure in place withwater-resistant pressure-sensitive tape.Cover the lens tissue with cellulosic ma-terial and secure in place with pressure-sensitive tape.

c. A piece of cushioning (6-3/4 x 3 x1/4) shall be placed over each tissuecovered glass and secured in place withtwo pieces of tape (1/2 x 6) per cush-ion.

11

7/23/2019 TM 9-1240-315-35 - Periscope M37

12/17

APPENDIX

REFERENCES

1. Publication Indexes

The following publication indexes should be consulted frequently for latest changes orrevisions of references given in the appendix and for new publications relating to materiel

covered in this manual.Index of Army Motion pictures, Film Strips, Slides, and Phono- DA Pam 108-1

Recordings.Military Publications:

Index of Administrative Publications . . . . . . . . . . . . . . . . . . . . . DA Pam 310-1Index of Blank Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. DA Pam 310-2Index of Graphic Training Aids and Devices . . . . . . . . . . . . . . . . DA Pam 310-5Index of Supply Manuals; Ordnance Corps . . . . . . . . . . . . . . . . . . DA Pam 310-29Index of Tables of Organization and Equipment, Tables of Organ- DA Pam 310-7

ization, Type Tables of Distribution, and Tables of Allowances.Index of Technical Manuals, Technical Bulletins, Supply Bul- DA Pam 310-4

letins, Lubrication Orders, and Modification Work Orders.Index of Training Publications. . . . . . . . . . . . . . . . . . . . . . . .. DA Pam 310-3

2. Supply Manuals

The following supply manuals of the Department of the Army Supply Manuals pertainto this materiel:

a. Destruction to Prevent Enemy USe.Ammunition and Explosives (Class 1375 Explosives, Solid SM 9-5-1375

Propellants and Explosive Devices).b. Repair and Overhaul.

Brushes, Paints, Sealers, and Adhesives . . . . . . . . . . . . . . . . . . SM 5-1-C5-1Fire Control Maintenance and Repair Shop Specialized Equipment: SM 9-4-4931-J40

Tool Set, Depot Maintenance, Supplementary Tools, Fixturesand Equipment (4931-798-7583).

Fire Control Maintenance and Repair Shop Specialized Equipment SM 9-4-4931-J51

Tool Set, Field and Depot Maintenance, General Purpose,Special Tools (4931-574-6433),

Fire Control Maintenance and Repair Shop Specialized Equipment SM 9-4-4931-J48Tool Set, Special Depot Maintenance, Optical Cleaning,Coating, Cementing and Decementing (4931-535-7827).

Fire Control Maintenance and Repair Shop Specialized Equipment SM 9-4-4931-J52Wrench Set, Spanner, Field and Depot Maintenance, Tubr, Dble-End Concave Inserted Blade, Set of 76 Wrenches (4931-580-0012).

Fuels, Lubricants, Oils and Waxes . . . . . . . . . . . . . . . . . . . . . . SM 10-1-C4-1Hardware and Abrasives. . . . . . . . . . . . . . . . . . . . . . . . . . SM 9-1-C5300Maintenance and Repair Shop Equipment. . . . . . . . . . . . . . . . . . . . SM 9-1-4910Tool Kit, Fire Control Repairman (5180-357-7735) . . . . . . . . . . . . . SM 9-4-5180-A61Tool Kit, Instrument Repairmans (5180-357-7743) . . . . . . . . . . . . . SM 9-4-5180-A62

3. Forms

The following forms pertain to this materiel:DA Form 9-1, Materiel Inspection Tag

12

7/23/2019 TM 9-1240-315-35 - Periscope M37

13/17

DA Form 9-12, Inspection of Ordnance EquipmentDA Form 9-79, Parts RequisitionDA Form 9-80, J ob Order File

DA Form 828, J ob Time Ticket - In divid ua lDA Form 829, Rejection MemorandumDA Form 1115,

DA Form 1296,DA Form 1297,DA Form 1546,DA Form 2028,

P ropert y Turn -In Ta g

Stock Accounting Record

Title Insert (Formal Accountability)Request for Issue or Turn-InRecommended Changes to DA Technical Manual Parts Lists or Supply

Manual 7, 8, or 9Maintenance Request RegisterMaintenance Request

DA Form 2405,DA Form 2407,DD Form 6, Report of Damaged or Improper ShipmentDD Form 250, Materiel Inspection and Receiving Report

4. Other Publications

a. Camouf lage.

Camouflage, Basic Principles and Field Camouflage --------- FM 5-20b. Decontamina t ion.

Chemical, Biological, and Radiological (CBR) Decontamination -- TM 3-220Small Unit Procedures in Nuclear, Biological, and Chemical FM 21-40

Warfare.c. Destruction to Prevent Enemy Use.Explosives and Demolitions - - - - - - - - - - - - - - - - - - - - - - - ----- FM 5-25Ordnance Ammunition Service - - - - - - - - - - - - -- - - -------- FM 9-5Ordnance Service in the Field - - - - - - - - - - - - - ---------- FM 9-1Safety: Regulations for Firing Ammunition for Training, Target AR 385-63/

Practice, and Combat. AFR 50-13d. General ,

D ict iona ry of U ni t ed S t a t es Arm y Term s - - - - - - - - - - - - - - - - - AR 320-5Logistics (General); Malfunctions Involving Ammunition and AR 700-1300-8

Explosives (Reports Control Symbol ORD-43),Maintenance of Supplies and Equipment: Organization, Policies, AR 750-5

and Responsibilities for Maintenance Operation.Military Symbols - - - - - - - - - - - - - - - - - - - - - - ------- ----- FM 21-30/

AFM 55-3Military Terms, Abbreviations, and Symbols:

Authorized Abbreviations and Brevity Codes - - - - - - - - - - - - - AR 320-50Military Training - - - - - - - - - - - - - - - - - - - - - --- ------ --- FM 21-5Ordnance Direct Support Services - - - - - - - - - - - - - - - - - - - - - - FM 9-3Ordnance General and Depot Support Services - - - - - - - - - - - - - - FM 9-4Principles of Fire Control Materiel - - - - - - - - - - - - - - - - - --- TM 9-3305-2Safety: Accident Reporting and Records - - - - - - - - - - - - - - - - - - AR 385-40Shop Mathematics - - - - - - - - - - - - - - --- - ------ ------ -- TM 9-2820Techniques of Military Instruction - - - - - - - - - - - - - - ------- FM 21-6The Army Equipment Record System and Procedures - - - - - - - - - TM 38-750

e. Main tena rice.

Cleaning of Ordnance Materiel - - - - - - - - - - - - - - - - - - - - - - - - TM 9-208-1

Field and Depot Maintenance Repair Parts and Special Tool Lists TM 9-1240-315-35Pfor Periscope M37.

General Maintenance Procedures for Fire Control Materiel - - - TM 9-254

13

7/23/2019 TM 9-1240-315-35 - Periscope M37

14/17

Grease Aircraft and Instrument (For Low and HighTemperature).

Inspection of Ordnance Materiel in Hands of Troops - - - - - - - - -Lubricating Oil: Aircraft Instrument, Low Volatility - - - - - - --

Lubrication of Ordnance Materiel - - - - - - - - - - - - - - - - - - - - -Maintenance of Supplies and Equipment: Command Maintenance

Inspections.Materials Used for Cleaning, Preserving, Abrading, and

Cementing Ordnance Materiel; and Related MaterialsIncluding Chemicals.

Operation and Maintenance of Ordnance Materielin Extreme Cold Weather, 0 to -65 F.

Operators Manual: Tank, Combat, Full Tracked:105-mm Gun, M60 (2350-678-5773); Trainer, TankGunnery: Medium, XM30 (6920-790-2259).

Optical Characteristics - - - - - - - - - - - - - - - - - - - - - - - - - - - -Ordnance Maintenance: Operation and Maintenance of

Optical Coating Equipment:Organizational Maintenance Manual: Tank, Combat, Full

Tracked: 105-mm Gun, M60 (2350-678-5773).Painting and Finishing Systems for Fire Control Instruments - -Painting Instructions for Field Use - - - - - - - - - - - - - - - - - - - -Preparation, Painting, and Finishing for Metal and Wood

Surfaces.Sealing Compound - - - - - - - - - - - - - - - - - - - - - - - - - - - ----Special Operations: Northern Operations - - - - - - - - - - - - - - - -Technical Procedures: Elementary Optics and Application

to Fire Control Instruments.Use and Care of Handtools and Measuring Tools - - - - - - - - - - -

f. Operations.Auxiliary Sighting and Fire Control Equipment - - - - - - - - - - - -Ordnance Corp Equipment Data Sheets - - - - - - - - - - - - - - - - - -

g. Shipment and Storage.Fire Control Parts, Equipment and Tools:

Packaging of.General Packaging Instructions for Ordnance General Supplies

Issue of Supplies and Equipment: Preparation,Processing, and Documentation for Requisitioning,Shipping, and Receiving.

Logistics (General): Preservation, Packaging, and Packing - - - -Logistics (General): Report of Damaged or Improper ShipmentMarking and Packing of Supplies and Equipment: Marking of

Supplies for Shipment.Preservation, Methods of - - - - - - - - - - - - - - - ----- -----Processing of Unboxed Self-Propelled and

Towed Class II Ordnance General Suppliesand Related Materiel for Shipment and Storage.

Protection of Ordnance General Supplies in Open Storage - - - - -Standards for Oversea Shipment and Domestic Issue of Ordnance

Materiel Other Than Ammunition and Army Aircraft.Storage of Supplies and Equipment: Storage and Materials

Handling.

MIL-G-3278

TM 9-1100MIL-L-6085A(2)TM 9-273AR 750-8

TM 9-247

TM 9-207

TM 9-2350-215-10

MIL-P-46329(ORD)TM 9-1501

TM 9-2350-215-20

MIL-STD-194(ORD)TM 9-213MIL-STD-171A(ORD)

MIL-S-11031A(ORD)FM 31-71TM 9-258

TM 9-243

TM 9-575TM 9-500

MIL-F-14619/P8635100

TM 9-200

AR 725-5

AR 700-15AR 700-58AR 746-80

MIL-P-116CTB 9-299/1

TB ORD 379TB ORD 385

TM 743-200-1

14

7/23/2019 TM 9-1240-315-35 - Periscope M37

15/17

By Order of Secretary of the Army:

Official:

J . C. LAMB ERT,Ma jo r Ge ner al , Uni te d Sta te s Ar my ,

The Adjutant General.

Dis t r ibu t ion :

Ac t i ve Ar my:

CNGB (1)

Sup & Maint Comd (12)

USA Ord CD Agcy (1)

USCONARC (3)

ARADCOM (2)

ARADCOM Rgn (2)

OS Maj Cored (2)

Base Cored (2)

LOGCOMD (1)

Armies (3)

Corps (2)

USA Corps (2)

Annis ton A Dep (2)

Erie A Dep (2)Letterkenny A Dep (2)

Mt Rainier A Dep (2)

Pueblo A Dep (2)

Tooele A Dep (2)

Raritan Arsenal (10)

EARLE G. WHEELER,General, United States Army,

Chief of Staff.

Benicia Arsenal (2)

Frankford Aarsenal (10)

Red River Arsenal (2)

Rock Island Arsenal (2)

Units org under fol T O E:

(2 c o p i e s )

9-7

9-9

9-12

9-259-26

9-27

9-57

9-659-66

9-67

9-76

9-167

9 - 5 0 0 ( B A , F A , E C , L A )

NG: N o n e .

USAR: Same as act ive army except a l lowance is one copy to each uni t .

For explanat ion of abbrevia t ions used, see AR 320-50.

15

7/23/2019 TM 9-1240-315-35 - Periscope M37

16/17

7/23/2019 TM 9-1240-315-35 - Periscope M37

17/17

This fine document...

Was brought to you by me:

Liberated Manuals -- free army and government manuals

Why do I do it? I am tired of sleazy C-!"M sellers# $ho ta%e &ubliclyavailable information# sla& '$atermar%s( and other )un% on it# and sell it.Those masters of search engine mani&ulation ma%e sure that their sites thatsell free information# come u& first in search engines. They did not create it...They did not even scan it... Why should they get your money? Why are notletting you give those free manuals to your friends?

I am setting this document *!++. This document $as made by the ,

overnment and is /"T &rotected by Co&yright. *eel free to share#re&ublish# sell and so on.

I am not as%ing you for donations# fees or handouts. If you can# &lease&rovide a lin% to liberatedmanuals.com# so that free manuals come u& first insearch engines:

Free Military and o!ernment Manuals

"incerely#$or %hudo!http://i$or.chudo!.com/

http://www.liberatedmanuals.com/http://www.liberatedmanuals.com/http://www.liberatedmanuals.com/http://www.liberatedmanuals.com/