TK15 / TK15-HD - Alamo Industrial Industrial (Terrain King) 15 foot Flex Wing Mowers Model - 3...

TK15 / TK15-HD15 ' Flex Wing

3 Gearbox Model

© 2003 Alamo Group Inc.

COMPLETE PARTSLISTING

ALAMO INDUSTRIAL1502 E. WalnutSeguin, Texas 78155830-372-3551

2003 Edition

Archive BookPart No. 02980265

ARCHIVE BOOKS/N TK15-36783 May 1978 to S/N TK15-39979 Sept. 1982

&S/N TK15HD-39980 Oct. 1982 to S/N TK15HD-46051 May 1987

(TK10 & TK10-HD)

Alamo Industrial (Terrain King)15 foot Flex Wing Mowers

Model - 3 Gearbox 15 ft. / Flex Wing Mowers

Production Date Serial NumberStart.........to....End Start s/n...............to.... End s/n

530............ May 1968........ Nov. 1973* TK530-07195............... TK530-21446*

CP180....... Dec. 1973........ Mar. 1976* CP180-31188............... CP180-34724*

X-3............ Apr. 1975......... Apr. 1978* X-3-33388..................... X-3-36782*

TK15.......... May 1978......... Sep. 1982* TK15-36783.................. TK15-39979*

TK15HD... Oct. 1982......... May 1987* TK15HD-39980............ TK15HD-46051*

A315...... Mar. 1990........ Sep. 1990* A315-01001............. A315-10080*

* End of Production for this Model

Model - 4 Gearbox 15 ft. Flex Wing Mowers

Production Date Serial NumberStart.........to....End Start s/n...............to... End s/n

TK15-IV.... Mar. 1985........ May. 1987* TK15-IV-42840............. TK15-IV-46051*

AG15-IV.... Jun. 1987........ Mar. 2002* AG15-IV-01001............. AG15-IV-04643*

A415...... Jun. 1990........ Dec. 2002* A415-01001............. A415-14000*

ST15........ Jan 2002........ Current ST15-C31500564205.. ST15-Current

* End of Production for this Model

Archive Manual Part Numbers

TK530........................ 02980262 TK15-IV....................... 00761652

CP180........................ 02980263 AG15-IV...................... 00761652

X-3.............................. 02980264 A315........................... 02980317

TK15.......................... 02980265 A415........................... 02980316

TK 15HD.....................02980265 ST15........................... 02980337

Index - 3TK15 & TK15HD (Archive Book) 08/03


ITEM PAGE NO.

AXLE ARMCenter Axle Single Wheel

TK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 64TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 65

Center Axle Dual WheelTK10-36783 (May 1978) to TK10-39979 (Sep. 1982).................................... 66TK10HD-39980 (Oct. 1982) to TK10HD-46051 (May 1987).......................... 67

Wing Axle Single Wheel OnlyTK10-36783 (May 1978) to TK10-39979 (Sep. 1982).................................... 68TK10HD-39980 (Oct. 1982) to TK10HD-46051 (May 1987).......................... 68

BLADE CARRIERS & BLADESCenter Section


Wing SectionTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 78TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 79

CHAIN GUARDSTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 86-94TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 86-94

COUNTER WEIGHT (10 foot Model)TK10-36783 (May 1978) to TK10-39979 (Sep. 1982).................................... 20-21TK10HD-39980 (Oct. 1982) to TK10HD-46051 (May 1987).......................... 20-21

CONTROL / LEVEL LIFT RODTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 62TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 63

DECK COMPONENT OVERALLTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 16-17TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 18-19

DRIVELINE PTO

Standard Driveline35R --------TK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................. 2635R --------TK15HD-39980 (Oct. 1982) to TK15HD-43293 (Jun. 1985)........ 27Cat IV -----TK15HD-43294 (Jul. 1985) to TK15HD-46051 (May 1987)...........28

Optional Driveline44R --------TK15HD-39980 (Oct. 1982 to TK15HD-43293 (Jun. 1985)......... 29Cat V ------TK15HD-43294 (Jul. 1985) to TK15HD-46051 (May 1987).......... 30

JACK SHAFTStandard Driveline

35R ------ TK15-36783 (May 1978) to TK15-39979 (Sep. 1982)....................3235R ------ TK15HD-39980 (Oct. 1982) to TK15HD-43293 (Jun. 1985)......... 33Cat IV ---- TK15HD-43294 (Jul. 1985) to TK15HD-46051 (May 1987)........... 34

INDEX - TK15 & TK15HD

Continued Next Page

TK15 & TK15HD (Archive Book) 08/03


Index - 4

INDEX - TK15 & TK15HDITEM PAGE NO.

DRIVELINE (Continued from Previuos Page) JACK SHAFT

Optional Driveline44R ------ TK15HD-39980 (Oct. 1982 to TK15HD-43293 (Jun. 1985)...........35Cat V -----TK15HD-43294 (Jul. 1985) to TK15HD-46051 (May 1987)........... 36

WING, RH & LHStandard Driveline



CLUTCHESStandard Driveline



GEARBOX ASSEMBLYDivider Gearbox

TK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 48-49TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 48-49

Wing GearboxTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 50-51TK15HD-39980 (Oct. 1982) to TK15HD-44814 (Apr. 1986).......................... 52-53TK15HD-44815 (May 1986) to TK15HD-46051 (May 1987)...........................54-55

GEARBOX SHIELDSDivider Gearbox


Wing GearboxTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 57TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 58

GENERAL SPECIFICATIONSSpecifications................................................................................................. 14-15

HYDRAULIC SYSTEMSchematic

TK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 80-81TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 80-81

Tongue Lift CylinderTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 82TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 82

Continued Next Page

Index - 5TK15 & TK15HD (Archive Book) 08/03


ITEM PAGE NO.

HYDRAULIC SYSTEM (Continued from Previous Page)Wing Lift and Fold Cylinders


3 Spool ValveTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 84TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 84

Hydraulic Cylinder StandTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 61TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 61

INDEX / INTRODUCTIONIndex............................................................................................................... 3-4-5Introduction..................................................................................................... 6

PARKING JACKTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 23TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 23

RATCHET JACKTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 73TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 73

SAFETY SECTIONSafety Information.......................................................................................... 7 thru 13

SKID SHOESTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 74TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 74

TONGUE ASSEMBLYTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 22TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 22

TIRE & WHEELAll Models...................................................................................................... 71-72

WINCH & STANDWinch Assembly............................................................................................ 60Winch Stand.................................................................................................. 61

WHEEL HUBTK15-36783 (May 1978) to TK15-39979 (Sep. 1982).................................... 69TK15HD-39980 (Oct. 1982) to TK15HD-46051 (May 1987).......................... 70

INDEX - TK15 & TK15HD

TK15 & TK15HD (Archive Book) 08/03


Index - 6

The TK15 / TK15HD Archive Book is a complete listing of Parts from the first Unit to thePresent. The Production Dates, Serial Numbers, Special Notes and Descriptions arefurnished to help find Replacement Parts. Dimension (if listed) are for Identification ofParts and MAY NOT be to Manufacturing Specification, Your measurements may varysome from dimensions listed. Some Parts may be changed and be different than partslisted. Some Modification may be required when replacing older parts. Match S/N's listedin this Book with theS/N's listed at the top of each Parts Page.

May 1978to

Sept. 1982

S/N TK15 -36783to

S/N TK15-39979

FRAMEASSEMBLY

Beginning Production Date

Ending Production Date Componets Listed This Page

PAGE EXAMPLE

For ordering parts the following instructions are offered to help eliminate delay

1. The purchase order must include the Name, Address (Ship to Street Address) of thePerson / Organization ordering the parts. Who / How Parts should be Billed. Nameand Phone Number of a Contact Person at your end.

2. The Purchase Order must list clearly the correct Part Number of Part. Quantity of each Part wanted, Complete and correct Description of each Part. All Parts will be shipped as requested depending on availability and/or reasonability of requestcarrier / method.

3. Alamo Industrial reserves the right to substitute parts where applicable and changeprices Without prior notice. Alamo Industrial also reserves the right to Ship Parts themost Reasonable way as determined by Alamo Industrial.

4. Some Parts are unlisted items, which are special production items not normally stocked or built for a limited / special use, These parts may be subject to specialhandling or cannot be priced till ordered. Always Request a quotation for such Partsbefore sending a purchase order.

INTRODUCTION

TK15 & TK15HDARCHIVE BOOK

Beginning S/N

Ending S/N

SAFETYSECTION

Safety Section - 7© 2003 Alamo Group Inc.

Safety Section - 8

SAFETY


Read these assembly instructions through completely and understand thembefore proceeding with the assembly of the equipement.

A safe and careful operator is the best operator. Safety is of primary importance to the manufac-turer and should be to the owner/operator. Most accidents can be avoided by being aware ofyour equipment, your surroundings, and observing certain precautions. The first section of thismanual includes a list of Safety Messages that, if followed, will help protect the operator andbystanders from injury or death. Read and understand these Safety Messages before assem-bling, operating or servicing this Implement. This equipment should only be operated by thosepersons who have read the Manual, who are responsible and trained, and who know how to do

so safely and responsibly.

The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout thismanual and on decals which are attached to the equipment. The Safety Alert Symbol means:“ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and SignalWord are intended to warn the owner/operator of impending hazards and the degree of possibleinjury faced when operating this equipment..

CAUTION! The lowest level of Safety Message; warns of possible injury. Decals located on the Equipment with this Signal Word are Black and Yellow.

WARNING! Serious injury or possible death! Decals are Black and Orange.

DANGER! Imminent death/critical injury. Decals are Red and White. (SG-1)

Practice all usual and customary safe working precautions andabove all---remember safety is up to YOU. Only YOU can preventserious injury or death from unsafe practices.

Safety Section - 9

SAFETY

© 2003Alamo Group Inc.

Si no lee Ingles, pida ayuda a alguien que si lo lea para que letraduzca las medidas de seguridad. (SG-3)

PELIGRO!

!LEA EL INSTRUCTIVO!

READ, UNDERSTAND, and FOLLOW the following SafetyMessages. Serious injury or death may occur unless care istaken to follow the warnings and instructions stated in the SafetyMessages. Always use good common sense to avoid hazards.

(SG-2)

!Si no lee Ingles, pida ayuda a alguien quesi lo lea para que le traduzca las medidasde seguridad. (SG-3)

PELIGRO! LEA ELINSTRUCTIVO!

WARNING! Perform service, repairs and lubrication according to the maintenance section. Ensure the unitis properly lubricated as specified in the lubrication schedule and all bolts and nuts are properlytorqued. Failure to properly service, repair and maintain this Implement in good operatingcondition could cause component failure and possible serious injury or even death. (SG-35)

WARNING! Operate this Equipment only with a Tractor equipped with anapproved roll-over-protective system (ROPS). Always wear seatbelts. Serious injury or even death could result from falling off thetractor--particularly during a turnover when the operator could bepinned under the ROPS. (SG-7)

DANGER! Never work under the Implement, the framework, or any lifted compo-nent unless the Implement is securely supported or blocked up toprevent sudden or inadvertent falling which could cause serious injuryor even death. (SG-14)

WARNING! Use caution and wear protective gloves when handling sharp objects such as blades, knives,and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharpsurfaces can inflict severe laceration injuries if proper hand protection is not worn. (SG-37)

Safety Section - 10

SAFETY


Many of the parts are heavy and require lifting assistance. Do not try tolift the heavy parts by yourself. Get help from another employee or froman overhead crane.

WARNING! The operator and all support personnel should wear hard hats,safety shoes, safety glasses, and proper hearing protection at alltimes for protection from injury including injury from items thrown bythe equipment. (SG-16)

Always wear safety shoes with steel toes when working on this equipment.It is recommended that the safety shoes have metatarsal guards.

When welding use Welding hood with the appropriate OSHA requiredprotective lens, welding apron, and welding gloves.

DANGER! Always disconnect the wire leads from the mower valve solenoid beforeperforming service on the Tractor or Mower. Use caution when workingon the Tractor or Mower. Tractor engine must be stopped beforeworking on Mower or Tractor. The Mower Blades could inadvertently beturned on without warning and cause immediate dismemberment, injuryor death. (SBM-12)

DANGER! Never run the tractor engine in a closed building or without adequateventilation. The exhaust fumes can be hazardous to your health.

(SG-23)

WARNING!

WARNING!

WARNING!

Safety Section - 11

SAFETY

© 2003Alamo Group Inc.

Before starting the mower make sure the area is clear and the floor hasbeen swept. The mower blade can throw objects several hundred feet.Thrown objects could damge property or cause severe bodily injuries evendeath.

WARNING! Make certain that the “Slow Moving Vehicle” (SMV) sign is installed insuch a way as to be clearly visible and legible. When transporting theEquipment use the Tractor flashing warning lights and follow all local trafficregulations. (SG-6)

DANGER! Start tractor only when properly seated in the Tractor seat. Starting atractor in gear can result in injury or death. Read the Tractor operatorsmanual for proper starting instructions. (SG-13)

DANGER! Do not operate this Equipment with hydraulic oil leaking. Oil isexpensive and its presence could present a hazard. Do not check forleaks with your hand! Use a piece of heavy paper or cardboard. High-pressure oil streams from breaks in the line could penetrate the skinand cause tissue damage including gangrene. If oil does penetrate theskin, have the injury treated immediately by a physician knowledge-able and skilled in this procedure. (SG-15)

WARNING! Always read carefully and comply fully with the manufacturers instruc-tions when handling oil, solvents, cleansers, and any other chemicalagent. (SG-22)

DANGER! All Safety Shields, Guards and Safety devices including(but not limited to) - the Deflectors, Chain Guards, SteelGuards, Gearbox Shields, PTO integral shields , andRetractable Door Shields should be used and main-tained in good working condition. All safety devicesshould be inspected carefully at least daily for missingor broken components. Missing, broken, or worn itemsmust be replaced at once to reduce the possibility ofinjury or death from thrown objects, entanglement, orblade contact. (SGM-3)

DANGER!

Safety Section - 12

SAFETY


DANGER! NEVER use drugs or alcohol immediately before or while operating theTractor and Implement. Drugs and alcohol will affect an operator’salertness and coordination and therefore affect the operator’s ability tooperate the equipment safely. Before operating the Tractor or Imple-ment, an operator on prescription or over-the-counter medication mustconsult a medical professional regarding any side effects of the medi-cation that would hinder their ability to operate the Equipment safely.NEVER knowingly allow anyone to operate this equipment when theiralertness or coordination is impaired. Serious injury or death to theoperator or others could result if the operator is under the influence ofdrugs or alcohol. (SG-27)

DANGER! Operate the Tractor and/or Implement controls only while properly seatedin the Tractor seat with the seat belt securely fastened around you.Inadvertent movement of the Tractor or Implement may cause seriousinjury or death. (SG-29)

WARNING! Engine Exhaust, some of its constituents, and certain vehiclecomponents contain or emit chemicals known to the state ofCalifornia to cause cancer and birth defects or otherreproductive harm. (SG-30)

WARNING! Battery posts, terminals and related accessories contain leadand lead compounds, chemicals known to the state of Califor-nia to cause cancer and birth defects or other reproductiveharm. Wash Hands after handling. (SG-31)

WARNING! Use extreme caution when getting onto the Implement to perform repairs, maintenance andwhen removing accumulated material. Only stand on solid flat surfaces to ensure good footing.Use a ladder or raised stand to access high spots which cannot be reached from gound level.Slipping and falling can cause serious injury or death. (SG-33)

WARNING! Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hoseconnections. Relieve hydraulic pressure before performing maintenance or repairs. Usegloves and eye protection when servicing hot components. Contact with a hot surface or fluidcan cause serious injury from burns or scalding. (SG-34)

WARNING! Avoid contact with hot surfaces of the engine or muffler. Use gloves and eye protection whenservicing hot components. Contact with a hot surface or fluid can cause serious injury fromburns or scalding. (SG-38)

Parts Section 13TK15 & TK15HD (Archive Book) 08/03


TK 15 & TK15HD Archive BookThis is a complete listing of Parts from the first Unit to the Present. The Production

Dates, Serial Numbers, Special Notes and Descriptions are furnished to helpfind Replacement Parts. Dimension (if listed) are for Identification of Parts and MAY NOTbe to Manufacturing Specification, Your measurements may vary some from dimensionslisted. Some Parts may be changed and be different than parts listed. Some Modificationmay be required when replacing older parts. Match S/N' and Ship Dates if avaialble.

ID The TK 15 (May 1978 to Sept. 1982)

The TK15 was built from May 1978 (s/n TK15-36783) to Sept. 1982 (s/n TK15-39979) then theModel Name was changed to TK15HD.Gearboxes:

The best way to ID the TK15 is by the Wing Gearboxes, They have Ball Bearings. The BladeBar Splined Hub and the Wing Gearbox Output Shafts are a 1-1/2" Taper w/12 Splines. The Front Coverhas 6 Retaining Bolts with 1 Oil Level Plug in front CoverStandard Drivelines:

The Standard Drivelines were a 35R Series standard and in a 540 RPM Only. There is no listingof Optional Drivelines for the TK15. The Optional Drivelines on the TK15HD would fit the TK15.

ID The TK 15HD (Oct. 1982 to May 1987)

The TK15 HD was Built form Oct. 1982 (s/n TK15HD-39980) to May 1987 (s/n TK15HD-46051) at which time this model was discontinued completely.Gearboxes:

The best way to ID this mower is by the Wing Gearboxes, They have Roller Bearings. The BladeBar Splined Hub and the Wing Gearbox Output Shafts are a 2" Taper w/15 Splines. The Front Cover has8 Retaining Bolts with 3 Oil Plug, Fill Plugs (one above input Shaft and one below input Shaft), and onesmall oil Level Plug (to one side of Input Shaft). These Plugs are in front Cover.Standard Driveline:

The Standard Drivelines were a 35R which had Steel Shields w/ a Square Shaft /Tube, The 35Rwas changed to a Cat IV Metric Driveline with Yellow Plastic Shields and a Triangle Shaped Shaft andTube. (35R & Cat IV driveline parts will not interchange - Only assemblies can be interchanged)Optional Drivelines:

The Optional Driveline was a 44R with metal Shields w/ a Square Shaft / Tube Type. These werechanged to Cat V Type that had Yellow Plastic Shields w/ Splined Shaft and Tubes. (44R & Cat V drivelineparts will not interchange - Only assemblies can be interchanged)

TK 15 & TK15HD Flex Wing RotaryARCHIVE BOOK

Parts Section 14TK15 & TK15HD (Archive Book) 08/03© 2003 Alamo Group Inc.

DIMINSIONAL SPECIFICATIONS:Transport Width w/ Wings Down............................................ 184"Transport Width w/ Wings Folded Up..................................... 82"Length, Overall........................................................................ 172"Weight (w/o Chain Guards).............................Approx............. 3250 lbs.Weight (w/ Chain Guards)...............................Approx............ 3500 lbs.

OPERATIONAL SPECIFICATIONS:Cutting Angle................Below Horizontal............................... 20 deg.

Above Horizontal............................... 45 deg.Cutting Width w/ Wings Down (TK15)..................................... 180"Cutting Width w/ Wings Down (TK10)..................................... 126"Cutting Width, Center Section................................................. 72"Cutting Width, Wing Section.................................................... 60"Blade Rotation..............Center Section................................... CCW

LH Wing Section................................ CCWRH Wing Section................................CW

Blade Tip Speed...........Center Section(540 RPM PTO).......... 14,500 FPMWing Section (540 RPM PTO)............14,250 FPM

Driveline Type.............. Center Section PTO........................... 35 RCenter Section Jack Shaft.................. 35 RWing Section...................................... 35 R

Driveline Shield............ Center Section PTO........................... SteelCenter Section Jack Shaft.................. SteelWing Section......................................Steel

Driveline Protection...... Center Section Gearbox..................... Clutch 3 SpringWing Section Gearbox........................Clutch 2 Spring

Driveline Clutch....................................................................... Adjustable

GEARBOX SPECIFICATIONS:Gearbox Rating.............Center / Divider.................................. 100 HP Continous

Wing LH or RH................................... 75 HP ContinousGearbox Bearing.......... Center / Divider.................................. Roller Bearing

Wing LH or RH................................... Ball BearingGearbox Output Shaft...Center / Divider (to Blade Carrier)...... 2" Taper X 15 Spl

Center / Divider (to Wing Drivelines).. 1-3/8" X 6 SplineWing LH & RH (to Blade Carrier)........ 1.5" Taper X 12 Spl

Gearbox Input Shaft..... Center / Divider (Jack Shaft).............. 1-3/8" X 6 SplineWing, LH or RH.................................. 1-3/8" X 6 Spline

TRACTOR REQUIREMENTS:Minimum Horsepower.............................................................. 40 HPPTO Speed Maximum............................................................. 540 PTO

GENERAL SPECIFICATIONSTK15



CHAIN GUARD OPTION:Complete Set ..............................................................Front & RearOpen or Closed Chain Guard.......................................Rear OnlySingle Curtain.............................................................. Front & RearDouble Curtain.............................................................Front & RearRubber Flaps...(Wings w/ Chainguards)...................... Rear

AXLE OPTION:Single Wheels .............................................................Center & Wing AxleDual Wheels................................................................ Center Axle Only

HYDRAULIC SYSTEM OPTION:Wing Lift & Fold Cylinders............................................Wing FoldingLevel Lift Tongue Cylinder............................................Deck Lift Cylinders

RATCHET JACK:Level Lift System......................................................... Center Section

WINCH:Wing Lift & Fold Option................................................ Wing Folding

WHEELS:Center Qty................................................................... 2 or 4Wing Qty......................................................................1 each WingTotal Wheel Qty........................................................... 4 or 6 (Single or Dual Center)Center & Wing............................................................. Sectional Tire & Wheel

Phnuematic Tire & Wheel15 " Phnumatic Wheel OnlyUsed Airplane Tire & WheelRecapped Airplane Tire & Wheel

OFFSET OPTION:10 ft 6in Width............................................................. LH or RH Offset (one Wing Only)

BLADE CARRIER OPTION:Bar Carriers................................................................. Center or Wings

GENERAL SPECIFICATIONSTK15


DECK COMPONENTSTK15

Blade Rotation CWRH Wing Section

Blade Rotation CCWLH Wing Section

Blade Rotation CCW Center Section

1

2 3

4

5, 23

6 7

8

9

10

720

11

8

12

13

14, 24

15, 25

16

17

18

19

22

26

26

26

26

16

17

May 1978to

Sept. 1982

TK15-36783to

TK15-39979



Item Part No. Qty Description

1 00751104 1 Tongue Assembly2 00749944 1 Driveline Assembly, PTO3 00750936 1 Jack Shaft Assembly4 00751034 1 Slip Clutch, Center Section5 00749003 1 Gearbox Assembly, Center Section6 00750909 1 Safety Shield, Center Section7 00751227 2 Level Rod8 00750874 2 Driveline, Wing Section9 00750950 1 Winch Assembly10 00751088 1 Axle Arm LH, Center Section (f/ Single Wheel)

00752300 1 Axle Arm LH, Center Section (f/ Dual Wheel)11 00751087 1 Axle Arm RH, Center Section (f/ Single Wheel)

00752300 1 Axle Arm RH, Center Section (f/ Dual Wheel)12 00751042 6 Hinge Pin13 00751107 6 Retaining Roll Pin14 00748784 1 Gearbox Assembly, RH Wing Section15 00749008 1 Gearbox Assembly, LH Wing Section16 00750903 1 Safety Shield, Wing Section17 00748824 2 Slip Clutch, Wing Section18 00750540 1 Axle Arm, RH Wing Section (Single Wheel)19 00750541 1 Axle Arm, LH Wing Section (Single Wheel)20 00751123 1 Parking Jack Assembly, (Not Shown)21 00554600 2 Ratchet Jack, (Not Shown)22 00750991 1 Skid Shoe Kit, (Not Shown)23 00750938 1 Blade Bar Assembly, Center Section (Not Shown)24 00750939 1 Blade Bar Assembly, RH Wing Section (Not Shown)25 00750937 1 Blade Bar Assembly, LH Wing Section (Not Shown)26 00750609 a/r Wheel Hub Assembly (4 -Single Wheel / 6 - Dual Wheel)

DECK COMPONENTSTK15

NOTE: Deck Weldments are Listed for Reference Only, SomeMAY NOT be available as a replacement part, ALWAYS

Check Price & Availabilty BEFORE ORDERING Deck Sec-tions as Replacement Parts.

May 1978to

Sept. 1982

TK15-36783to

TK15-39979


DECK COMPONENTSTK15HD

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051

Blade Rotation CWRH Wing Section

Blade Rotation CCWLH Wing Section

Blade Rotation CCW Center Section

1

2 3

4

5, 23

6 7

8

9

10

720

11

8

12

13

14, 24

15, 25

16

17

18

19

22

26

26

26

26

16

17

(TK15HD-46051 endedproduction on this model)




1 00751104 1 Tongue Assembly2 00749944 1 Driveline Assembly, PTO3 00750936 1 Jack Shaft Assembly4 00751034 1 Slip Clutch, Center Section5 00749003 1 Gearbox Assembly, Center Section6 00750909 1 Safety Shield, Center Section7 00751227 2 Level Rod8 00750874 2 Driveline, Wing Section9 00750950 1 Winch Assembly10 00752301 1 Axle Arm LH, Center Section (f/ Single Wheel)

00752300 1 Axle Arm LH, Center Section (f/ Dual Wheel)11 00752299 1 Axle Arm RH, Center Section (f/ Single Wheel)

00752300 1 Axle Arm RH, Center Section (f/ Dual Wheel)12 00751042 6 Hinge Pin13 00751107 6 Retaining Roll Pin14 00752140 1 Gearbox Assembly, RH Wing Section15 00752141 1 Gearbox Assembly, LH Wing Section16 00750903 1 Safety Shield, Wing Section17 00748824 2 Slip Clutch, Wing Section18 00750540 1 Axle Arm, RH Wing Section (Single Wheel)19 00750541 1 Axle Arm, LH Wing Section (Single Wheel)20 00751123 1 Parking Jack Assembly, (Not Shown)21 00554600 2 Ratchet Jack, (Not Shown)22 00750991 1 Skid Shoe Kit, (Not Shown)23 00750938 1 Blade Bar Assembly, Center Section (Not Shown)24 00752150 1 Blade Bar Assembly, RH Wing Section (Not Shown)25 00752151 1 Blade Bar Assembly, LH Wing Section (Not Shown)26 00752753 a/r Wheel Hub Assembly (4 -Single Wheel / 6 - Dual Wheel)

DECK COMPONENTSTK15HD

NOTE: Deck Weldments are Listed for Reference Only, SomeMAY NOT be available as a replacement part, ALWAYS

Check Price & Availabilty BEFORE ORDERING Deck Sec-tions as Replacement Parts.

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051




COUNTER WEIGHT ASYTK 10 & TK15HD

1

2

3

4

56 7

8

9, 10

Note: Fill the Counter WeightCavity Full with Concrete, Thiswill need to be done by User. Ifreplacement Part is ordered itwill not be filled with concrete.

6

4

5

6

May 1978to

May 1987

TK15-36783to

TK15HD-46051



COUNTER WEIGHT ASYTK 10 & TK15HD

Item Part No. Qty Qty DescriptionLH RH

00750623 1 -- Counter Weight Asy, LH Side (Shown)00750631 -- 1 Counter Weight Asy, RH Side (Not Shown)

1 00750624 1 -- Counter Weight Weldment, LH Side (Shown)00750635 -- -- Counter Weight Weldment, RH Side (Not Shown)

2 00750989 1 -- Skid Shoe Weldment, LH Side (Shown)00750993 -- 1 Skid Shoe Weldment, RH Side (Not Shown)

3 00751203 1 -- Chain Guard Asy, LH Side (Shown)00751161 -- 1 Chain Guard Asy, RH Side (Not Shown)

4 00749171 2 2 Bolt5 00019400 2 2 Nut6 00002700 4 4 Flatwasher7 00001300 4 4 Lockwasher8 00001200 2 2 Nut9 00751042 3 3 Hinge Pin (Not Shown)10 00751107 3 3 Retaining Roll Pin f/ Hinge Pin (Not Shown)

NOTE: Some Assembly Numbers are Listed for Reference Only,Some MAY NOT be available as assemblies or as replace-

ment part, ALWAYS Check Price & Availabilty BEFOREORDERING Assemblies or Replacement Parts.

The TK 10 is a 15 foot model that was offered as an optional 10 foot modelwith only the Left Wing, or the Right Wing. The Counter Weight is used in placeof the Wing that is not used and the model became a TK10. Check which you

have before ordering parts. The RH Wing Model is the most common.

May 1978to

May 1987

TK15-36783to

TK15HD-46051




TONGUE ASYTK 15 & TK15HD


00751104 1 Tongue Asy, w/ Items 2, 3 & 41 00752257 1 Tongue Weldment2 00748807 1 Tongue Clevis Weldment3 00751106 1 Clevis Pin (use 1 of # 00752439 & 2 of # 00753975)4 00008900 2 Stay Pins, Hairpin Clips5 00162803 2 Control Rod Lift Pin6 00162805 2 Tongue Hinge Pin7 00002701 8 Flatwasher8 02022300 8 Cotter Pin9 02712500 1 Bolt10 02030300 1 Nut11 00606200 2 Washer

1

2

3

4

5

6

7

8

9

10

11

May 1978to

May 1987

TK15-36783to

TK15HD-46051




PARKING JACK ASYTK 15 & TK15HD


1. 00751123 1 Parking Jack Asy, w/ Items 2 & 32. 00749892 1 Jack Retaining Pin3. 00000400 1 Cotter Pin

1

2

3

May 1978to

May 1987

TK15-36783to

TK15HD-46051




NOTES



PTO DrivelinesStandard35R Series and Cat IV Series

Optional44R Series and Cat V Series

35R = Painted Steel Shield &Square Shaft and Tube

44R = Painted Steel Shield &Square Shaft and Tube

Cat IV = Yellow Plastic Shields &Triangle Shaft and Tube

Cat V = Yellow Plastic Shields &Spline Shaft and Tube


PTO DRIVELINETK15

(Standard 35R)


00749944 1 Driveline Assembly (Items 1 & 2) Both Ends1. 00749966 1 Driveline Tube Half Complete with Shields, (Tractor PTO End)2. 00749965 1 Driveline Shaft Half Complete w/Shields, (Mower Jack Shaft End)3. 00191900 1 Yoke QD, 1-3/8" X 6 Spline (Use # W284A Slide Collar Yoke)4 00749960 1 QD Pin Kit (Replacement Only)5. 00189700 2 Universal Joint (X-Kit)6. 00749417 1 Outer Shield & Bell Assembly

00751168 1 Shield Bearing Repair Kit *7. 00749165 1 Yoke, 1-3/8" X 6 Spline w/ Through Hole (Jack Shaft End)8. 00749416 1 Inner Shield & Bell Assembly

00751168 2 Shield Bearing Repair Kit *9. 00019500 2 Grease Fittings

* Shield Bearing Repair Kit has 1 ea. of # 00749962 Snap Ring, # 00749963 ThrustWasher, # 00749964 Shield Bearing. Will Fit on Inner or Outer Shield.

Tractor PTOEnd

Mower JackShaft End

1

2

3, 4

5 6

789

4

NOTE: This Driveline has Metal Shields with Square Shaft and Round Tube with a SquareSleeve welded to it. The 35R Driveline was standard on this model. The Later Model theTK15HD offered a 44R or Cat V Option that could be used on this model if wanted. 35R, 44R,Cat IV and Cat V driveline parts will not interchange, only interchanga as complete asassembly. Check before ordering parts.

May 1978to

Sept. 1982

TK15-36783to

TK15-39979

After Sept. 1982 this model name was changed to the TK15HD,the Wing Gearboxes were changed to a different type



PTO DRIVELINETK15HD

(Standard 35R)


00749944 1 Driveline Assembly (Items 1 & 2) Both Ends1. 00749966 1 Driveline Tube Half Complete with Shields, (Tractor PTO End)2. 00749965 1 Driveline Shaft Half Complete w/Shields, (Mower Jack Shaft End)3. 00191900 1 Yoke QD, 1-3/8" X 6 Spline (Use # W284A Slide Collar Yoke)4 00749960 1 QD Pin Kit (Replacement Only)5. 00189700 2 Universal Joint (X-Kit)6. 00749417 1 Outer Shield & Bell Assembly



* Shield Bearing Repair Kit has 1 ea. of # 00749962 Snap Ring, # 00749963 ThrustWasher, # 00749964 Shield Bearing. Will Fit on Inner or Outer Shield.

Tractor PTOEnd

Mower JackShaft End

1

2

3, 4

5 6

789

4

NOTE: This Driveline has Metal Shields with Square Shaft and Round Tube with a SquareSleeve welded to it. To ID the 35R driveline from the 44R driveline, look at the Universal Jointretaining Clips. The 35R has Clips in a groove in yoke on the outside of yoke ears, the 44Rhas clips that slide over the Universal Joint Cap on the inside of Yoke ears.

Oct. 1982to

Jun. 1985

TK15HD-39980to

TK15HD-43293

Metal Shielded Drivelines with square Shaft and square Sleeve Tube.Parts will not interchange between later Drivelines and this one.


PTO DRIVELINETK15HD

(Standard Cat IV)(Replaced the 35R)

Jul. 1985to

May 1987

TK15HD-43293to

TK15HD-46051

Plastic Shielded Drivelines Triangle shapedShaft and Tube. Parts will not interchange

between earlier Drivelines and this one.


00754185 1 Driveline Assembly (Items 1 & 2) Both Ends1. 00754207 1 Driveline Tube Half Complete with Shields, (Tractor PTO End)2. 00754206 1 Driveline Shaft Half Complete w/Shields, (Mower Jack Shaft End)3. 00752883 2 Yoke QD, 1-3/8" X 6 Spline (replaced by Slide/Twist Collar Yoke)4 00752880 2 QD Pin Kit (Replacement Only)5. 00752896 2 Universal Joint (X-Kit)

00753864 2 Grease Fitting Only, f/ U-Jount, (Replacement Part Only)6. 00754208 1 Shield Kit, Inner7. 00754209 1 Shield Kit, Outer8. 00754331 1 Locking Collar, Inner9. 00754169 1 Locking Collar, Outer10. 00754330 6 Nylon Bolt (Qty 3 ea. Shield)11. 00754358 1 Shield Assembly complete, Inner & Outer Half12. 00754335 1 Grease Fitting for Tube

NOTE: The Cat IV Driveline replaced the 35R driveline as standard. The Cat IVdriveline ia a metric type and parts will not interchange with earlier 35R series. TheShields are Yellow Plastic, The Tube and Shaft are triangle shaped.

12

3,4 56,8,10,11

7,9,10,11 53,4

12

S/N TK15HD-46051was end of prodution f/ this model



PTO DRIVELINETK15HD

(Optional 44R)


00749958 1 Driveline Assembly (Items 1 & 2) Both Ends1. 00751168 1 Driveline Tube Half Complete with Shields, (Tractor PTO End)2. 00751170 1 Driveline Shaft Half Complete w/Shields, (Mower Jack Shaft End)3. 00669000 1 Yoke QD, 1-3/8" X 6 Spline (Use # W821A Slide Collar Yoke)4 00749960 1 QD Pin Kit (Replacement Only)5. 00669100 2 Universal Joint (X-Kit) (Use # W840)6. 00751172 1 Outer Shield & Bell Assembly



* Shield Bearing Repair Kit# 00751176 has 1 ea. of Snap Ring, Thrust Washer,Shield Bearing. Will Fit on Inner or Outer Shield.

Tractor PTOEnd

Mower JackShaft End

1

2

3, 4

5 6

789

4

NOTE: This Driveline has Metal Shields with Square Shaft and Round Tube with a SquareSleeve welded to it. To ID the 35R driveline from the 44R driveline, look at the Universal Jointretaining Clips. The 35R has Clips in a groove in yoke on the outside of yoke ears, the 44Rhas clips that slide over the Universal Joint Cap on the inside of Yoke ears.

Oct. 1982to

Jun. 1985

TK15HD-39980to

TK15HD-43293



PTO DRIVELINETK15HD

(Standard Cat V)(Replaced the 44R)

Jul. 1985to

May 1987

TK15HD-43293to

TK15HD-46051

Plastic Shielded Drivelines Splined Shaftand Tube. Parts will not interchange between

earlier Drivelines and this one.



00752793 1 Driveline Assembly (Items 1 & 2) Both Ends1. 00754380 1 Driveline Tube Half Complete with Shields, (Tractor PTO End)2. 00754380 1 Driveline Shaft Half Complete w/Shields, (Mower Jack Shaft End)3. 00753067 2 Yoke QD, 1-3/8" X 6 Spline (replaced by Slide/Twist Collar Yoke)4 00753067 2 QD Pin Kit (Replacement Only)5. 00753865 2 Universal Joint (X-Kit)6. 00754335 1 Grease Fitting Only, f/ Tube (Replacement Part Only)7. 00754334 1 Grease Fitting Only, f/ U-Joint (Replacement Part Only)8. 00754330 6 Nylon Bolt (Qty 3 ea. Shield)9. 00754332 1 Locking Collar, Outer10. 00754331 1 Locking Collar, Inner11. 00754382 1 Shield half Asy. Inner12. 00754383 1 Shild half Asy13. 00754380 1 Shield Assembly complete, Inner & Outer Half

NOTE: The Cat V Driveline replaced the 44R driveline as standard. The Cat Vdriveline ia a metric type and parts will not interchange with earlier 44R series. TheShields are Yellow Plastic, The Tube and Shaft are Splined in shape.

12

3,4 12 5,7 10

8

69 5,7

8

11 3,4



Jack ShaftDrivelinesStandard35R Series and Cat IV Series


35R = Painted Steel Shield &Square Shaft and Tube &Clutch w/ Bellville Springs

44R = Painted Steel Shield &Square Shaft and Tube&Clutch w/ Bellville Springs

Cat IV = Yellow Plastic Shields &Triangle Shaft and Tube &Clutch w/ 8 Coil Springs

Cat V = Yellow Plastic Shields &Spline Shaft and Tube &Clutch w/ 8 Coil Springs



1. 00750396 -- Jack Shaft Asy w/o Bearing2. 00749074 1 Pillow Block Bearing (w/ Grease Fitting)

00752176 1 Grease Fitting Only3. 00409200 1 Clutch Yoke w/ Bronze Bushing3A. 271105B5 1 Bronze Bushing Only4. 00189700 1 Universal Joint (X-Kit)5. 00002700 2 Flatwasher6. 00019400 2 Locknut7. 00604800 2 Bolt8. 00750949 1 Jack Shaft Shield9. 00750985 1 Grass Shield10. 00750925 4 Bolt (Not Shown)11. 00011700 4 Lockwasher (Not Shown)12. 00750940 4 Locknut (Not Shown)13. 00749413 1 Bolt (Not Shown)14. 00749017 1 locknut (Not Shown)15. 00310800 2 Snap Ring, f/ Shield

00310700 2 Thrust Washer f/ Shield00183700 2 Nylon Bearing, f/ Shield

NOTE: Metal Shielded Drivelines with welded tube and 1-3/8" X 6 Spline Stub shaft welded on.

JACKSHAFT DRIVELINETK15

(Standard 35R)

May 1978to

Sept. 1982

TK15-36783to

TK15-39979


9

2

3

10,11,12

45, 6, 7

8

3A

13,14

1-3/8" X 6 Spline

1 15



JACKSHAFT DRIVELINETK15HD

(Standard 35R)

Oct. 1982to

Jun. 1985

TK15HD-39980to

TK15HD-43293

NOTE: Metal Shielded Drivelines with weldedtube and 1-3/8" X 6 Spline Stub shaft welded on.


1. 00750396 -- Jack Shaft Asy w/o Bearing2. 00749074 1 Pillow Block Bearing (w/ Grease Fitting)

00752176 1 Grease Fitting Only3. 00409200 1 Clutch Yoke w/ Bronze Bushing3A. 271105B5 1 Bronze Bushing Only4. 00189700 1 Universal Joint (X-Kit)5. 00002700 2 Flatwasher6. 00019400 2 Locknut7. 00604800 2 Bolt8. 00750949 1 Jack Shaft Shield Asy9. 00750985 1 Grass Shield10. 00750925 4 Bolt (Not Shown)11. 00011700 4 Lockwasher (Not Shown)12. 00750940 4 Locknut (Not Shown)13. 00749413 1 Bolt (Not Shown)14. 00749017 1 locknut (Not Shown)15. 00310800 2 Snap Ring, f/ Shield

00310700 2 Thrust Washer f/ Shield00183700 2 Nylon Bearing, f/ Shield

9

2

3

10,11,12

45, 6, 7

8

3A

13,14

1-3/8" X 6 Spline

1 15

NOTE: Metal Shielded Drivelines with welded tube and 1-3/8" X 6 Spline Stub shaft weldedon. This Jackshaft is the same as the one used on the TK15 previously.


Plastic Shielded Driveline with Triangle shaped Shaft and Tube.Parts from this driveline will not interchange with parts fro previ-ous Driveline. Will replace earlier style as an assembly only.


(Standard Cat IV)

Jul. 1985to

May 1987

TK15HD-43294to

TK15HD-46051


00754186 -- Jack Shaft Asy w/ Pillow Block Bearing1. 00752816 1 Jack Shaft Asy2. 00749074 1 Pillow Block Bearing Asy.

00752176 1 Grease Fitting Only (f/ Pillow Block Bearing)3. 00754200 1 Clutch Asy. (See Clutch Parts Page)4. 00752896 1 Universal Joint (X-Kit)5. 00002700 2 Flatwasher f/ Pillow Block Bearing6. 00019400 2 Locknut f/ Pillow Block Bearing7. 00604800 2 Bolt f/ Pillow Block Bearing8. 00754187 1 Shield Asy, Complete Inner and Outer9. 00754331 1 Locking Collar, Inner10. 00754332 1 Locking Coller, Outer11. 00754330 6 Nylon Bolt, 3 ea. Shield12. 00755571 1 Tube, Yoke & Splined Shaft Asy.


1

3

410,11

9,11

12

8

1-3/8" X 6 SplineStub Shaft

1-3/8" X 6 SplineClutch Hub

5,6,7

2

NOTE: The Cat IV driveline replaced the standard 35R series driveline as an assembly.The cat IV driveline is a metric type and parts will not interchange with the older 35R. TheShields on this driveline are Yellow Plastic and the tube is triangle shaped.




(Optional 44R)

Oct. 1982to

Jun. 1985

TK15HD-39980to

TK15HD-43293

NOTE: Metal Shielded Drivelines with weldedtube and 1-3/8" X 6 Spline Stub shaft welded on.


1. 00751110 -- Jack Shaft Asy2. 00749074 1 Pillow Block Bearing (w/ Grease Fitting

00752176 1 Grease Fitting Only3. 00751243 1 Clutch Yoke w/ Bronze Bushing3A. 271105B5 1 Bronze Bushing Only4. 00669100 1 Universal Joint (X-Kit) Use # W8405. 00002700 2 Flatwasher6. 00019400 2 Locknut7. 00604800 2 Bolt8. 00752277 1 Jack Shaft Shield9. 00750985 1 Grass Shield10. 00750925 4 Bolt (Not Shown)11. 00011700 4 Lockwasher (Not Shown)12. 00750940 4 Locknut (Not Shown)13. 63092200 1 Bolt, Retains Yoke to Spline Stub (Not Shown)14. 00750940 1 locknut , Retains Yoke to Spline Stub (Not Shown)

9

2

3

10,11,12

45, 6, 7

8

3A

13,14

1-3/8" X 6 Spline

1 15

NOTE: To ID 44R driveline from the 35R driveline, Look at the Universal Joint CapRetaining Clips. The clips on the 44R are on the inside of the cap in grooves that aremachined ionto the cap. The 35R has retaining clips that are on the outside of the cap andgo into grooves machined into the Toke Ear. (44R drivelines offered as option on TK15HDonly, but they would have fit the TK15)


Plastic Shielded Driveline with Triangle shaped Shaft and Tube.Parts from this driveline will not interchange with parts fromprevious Driveline. Will replace earlier style as an assembly only.


(Optional Cat V)

Jul. 1985to

May 1987

TK15HD-43294to

TK15HD-46051


1. 00752794 -- Jack Shaft Asy w/ Pillow Block Bearing2. 00749074 1 Pillow Block Bearing Asy.

00752176 1 Grease Fitting Only (f/ Pillow Block Bearing)3. 00753881 1 Clutch Asy. (See Clutch Parts Page)4. 00753068 1 Universal Joint (X-Kit)

00754334 1 Grease Fitting, Replacement f/ Universal Joint5. 00002700 2 Flatwasher f/ Pillow Block Bearing6. 00019400 2 Locknut f/ Pillow Block Bearing7. 00604800 2 Bolt f/ Pillow Block Bearing8. 00754393 1 Shield Asy, Complete Inner and Outer9. 00754331 1 Locking Collar, Inner10. 00754332 1 Locking Coller, Outer11. 00754330 6 Nylon Bolt, 3 ea. Shield12. 00754392 1 Tube, Yoke & Splined Shaft Asy.


1

3

410,11

9,11

12

8

1-3/8" X 6 SplineStub Shaft

1-3/8" X 6 SplineClutch Hub

5,6,7

2

NOTE: The Cat V driveline replaced the Optional 44R series driveline as an assembly. Thecat IV driveline is a metric type and parts will not interchange with the older 35R, 44R orCat IV. The Shields on this driveline are Yellow Plastic and the tube is triangle shaped.



Wing DrivelinesStandard35R Series and Cat IV Series







WING DRIVELINETK15

(Standard 35R)


00750874 1 Driveline Assembly (Items 1 & 2) Both Ends, RH or LH Wing1. 00750607 1 Driveline Tube Half Complete with Shields, (Wing Gearbox End)2. 00750606 1 Driveline Shaft Half Complete w/Shields, (Divider Gearbox End)3. 00189700 2 Universal Joint (X-Kit)4. 00409200 1 Yoke, Slip Clutch Flange Yoke w/ Bronze Bushing

271105B 1 Bronze Bushing, (Replacement)5. 00749165 1 Yoke, 1-3/8" X 6 Spline (Divider Gearbox End)6. 00751167 1 Shield Bearing Repair Kit7. 00750877 1 Shield & Bell Asy, Outer8. 00750876 1 Shiled & Bell Asy, Inner9. 00749413 1 Bolt, (Retains Yoke Item 5 to Gearbox)10. 00749017 1 Nut, (Retains Yoke Item 5 to Gearbox)11. 00750925 4 Bolt, (Retains Yoke Item 4 to Clutch)12. 00011700 4 Lockwasher, (Retains Yoke Item 4 to Clutch)13. 00750940 4 Nut, (Retains Yoke Item 4 to Clutch)

NOTE: This Driveline has Metal Shields with Square Shaft and Round Tube with a SquareSleeve welded to it. The 35R Driveline was standard on this model. The Later Model theTK15HD offered a 44R or Cat V Option that could be used on this model if wanted. 35R, 44R,Cat IV and Cat V driveline parts will not interchange, only interchanga as complete asassembly. Check before ordering parts.

May 1978to

Sept. 1982

TK15-36783to

TK15-39979


12

3

4

5

6

78

9,10

111213

6



WING DRIVELINETK15HD

(Standard 35R)

Oct. 1982to

Jun. 1985

TK15HD-39980to

TK15HD-43293


12

3

4

5

6

78

9,10

111213

6


00750874 1 Driveline Assembly (Items 1 & 2) Both Ends, RH or LH Wing1. 00750607 1 Driveline Tube Half Complete with Shields, (Wing Gearbox End)2. 00750606 1 Driveline Shaft Half Complete w/Shields, (Divider Gearbox End)3. 00189700 2 Universal Joint (X-Kit)4. 00409200 1 Yoke, Slip Clutch Flange Yoke w/ Bronze Bushing

271105B 1 Bronze Bushing, (Replacement)5. 00749165 1 Yoke, 1-3/8" X 6 Spline (Divider Gearbox End)6. 00751167 1 Shield Bearing Repair Kit7. 00750877 1 Shield & Bell Asy, Outer8. 00750876 1 Shiled & Bell Asy, Inner9. 00749413 1 Bolt, (Retains Yoke Item 5 to Gearbox)10. 00749017 1 Nut, (Retains Yoke Item 5 to Gearbox)11. 00750925 4 Bolt, (Retains Yoke Item 4 to Clutch)12. 00011700 4 Lockwasher, (Retains Yoke Item 4 to Clutch)13. 00750940 4 Nut, (Retains Yoke Item 4 to Clutch)



Plastic Shielded Driveline with Triangle shaped Shaft and Tube.Parts from this driveline will not interchange with parts fromprevious Driveline. Will replace earlier style as an assembly only.


(Standard Cat IV)

Jul. 1985to

May 1987

TK15HD-43294to

TK15HD-46051



00752817 1 Driveline Assembly (Items 1 & 2) Both Ends, RH or LH Wing1. 00754191 1 Driveline Tube Half Complete with Shields, (Wing Gearbox End)2. 00754190 1 Driveline Shaft Half Complete w/Shields, (Divider Gearbox End)3. 00752883 1 Yoke, 1-3/8" X 6 Spline QD, (Replaced by Slide collar Yoke)4. 00752880 1 Push Pin Set, (Replacement Part Only)5. 00752896 2 Universal Joint (X-Kit)6. 00774578 1 Outer Tube and Yoke7. 00774579 1 Inner Tube Only

00754153 1 Inner Tube Yoke Only00754167 1 Roll Pin f/ Inner Tube & Yoke

8. 00754330 6 Nylon Bolt, Shield Retainer9. 00754332 1 Locking Collar, Outer10. 00754331 1 Locking Collar, Inner11. 00754192 1 Shield Half Assembly, Inner12. 00754193 1 Shield Half Assembly, Outer13. 00754200 1 Slip Clutch Assembly

NOTE: The Cat IV driveline replaced the standard 35R series driveline as an assembly.The cat IV driveline is a metric type and parts will not interchange with the older 35R. TheShields on this driveline are Yellow Plastic and the Shaft & Ttube is triangle shaped asshown in drawing.

135 12

9 6 7 1011 5 3,4

8 8

21




(Optional 44R)

Oct. 1982to

Jun. 1985

TK15HD-39980to

TK15HD-43293


12

3

4

5

6

78

9,10

111213

6


00751111 1 Driveline Assembly (Items 1 & 2) Both Ends, RH or LH Wing1. 00751241 1 Driveline Tube Half Complete with Shields, (Wing Gearbox End)2. 00751242 1 Driveline Shaft Half Complete w/Shields, (Divider Gearbox End)3. 00669100 2 Universal Joint (X-Kit) Use # W8404. 00751243 1 Yoke, Slip Clutch Flange Yoke w/ Bronze Bushing

271105B5 1 Bronze Bushing, (Replacement)5. 00751174 1 Yoke, 1-3/8" X 6 Spline (Divider Gearbox End)6. 00751176 1 Shield Bearing Repair Kit7. 00751986 1 Shield & Bell Asy, Outer8. 00751985 1 Shiled & Bell Asy, Inner9. 63092200 1 Bolt, (Retains Yoke Item 5 to Gearbox)10. 00750940 1 Nut, (Retains Yoke Item 5 to Gearbox)11. 00750925 4 Bolt, (Retains Yoke Item 4 to Clutch)12. 00011700 4 Lockwasher, (Retains Yoke Item 4 to Clutch)13. 00750940 4 Nut, (Retains Yoke Item 4 to Clutch)



Plastic Shielded Driveline with Splined shaped Shaft and Tube.Parts from this driveline will not interchange with parts fromprevious Driveline. Will replace earlier style as an assembly only.


(Optional Cat V)

Jul. 1985to

May 1987

TK15HD-43294to

TK15HD-46051



00752795 1 Driveline Assembly (Items 1 & 2) Both Ends, RH or LH Wing1. 00754380 1 Driveline Tube Half Complete with Shields, (Wing Gearbox End)2. 00754381 1 Driveline Shaft Half Complete w/Shields, (Divider Gearbox End)3. 00753067 1 Yoke, 1-3/8" X 6 Spline QD, (Replaced by Slide collar Yoke)4. 00753865 1 Push Pin Set, (Replacement Part Only)5. 00753068 2 Universal Joint (X-Kit)6. 00754335 1 Grease Fitting f/ Yube7. 00754334 1 Grease Fitting f/ Universal Joint8. 00754330 6 Nylon Bolt, Shield Retainer9. 00754332 1 Locking Collar, Outer10. 00754331 1 Locking Collar, Inner11. 00754382 1 Shield Half Assembly, Inner12. 00754383 1 Shield Half Assembly, Outer13. 00754380 1 Shield Asembly Complete, Inner & Outer Half14. 00753881 1 Slip Clutch Assembly

NOTE: The Cat V driveline replaced the Optional 44R series driveline as an assembly. Thecat V driveline is a metric type and parts will not interchange with the older 44R. The Shieldson this driveline are Yellow Plastic and the Shaft & Tube is Splined as shown in drawing.

1 2

145,7 12 9

13 1011 5,7 3,4

8 86



ClutchesStandard35R Series and Cat IV Series







CLUTCH - CENTER & WINGTK15 & TK15HD(Standard 35R)


00751034 a/r Clutch Assembly, Center Gearbox (Items 1 thru 6B)00758824 a/r Clutch Assembly, Wing Gearbox (Items 1 thru 6B)

1. 00748826 1 Drive Plate2. 00748833 2 Friction Disc Facing3. 00748830 1 Adjusting Nut4. 00748829 1 Hub5. 00748831 3 Bellville Spring, Center Section Clutch Only

00748831 2 Bellville Spring, Wing Section Cluch Only6. 00748832 1 Pressure Plate (Front Plate Only)6B. 00748834 1 Back Plate (Back Plate Only)

00751129 1 Drive Plate Asy, Front & Back Plates (6 & 6B)7. 00612703 1 Retaining Ring8. 00409200 a/r Yoke & Bushing, 35R Driveline

00751243 a/r Yoke & Bushing, 44R Driveline9. 271105B5 1 Bushing Only

To Adjust this Clutch. Tighten Item 3 Adjusting Nut untill all the Slack is removed and all thecomponents are touching as shown above. Make a reference Mark on the Adjusting Nut andcomponents, this will show how many turns you make. Tighten adjusting Nut an additional2-1/8 turns, this is the same for the Center Gearbox clutch and the Wing Clutches.

66B

Gearbox InputShaft

1

2

3

4

5

8

7

2

9

3 Spring Clutch usedon Center Gearbox &

2 Spring Clutch onWing Driveline. DONOT switch these

from Center to Wing

May 1978to

Sept. 1982

TK15-36783to

TK15-39979

Used with Standard35R Drivelines



CLUTCH - CENTER & WINGTK15 & TK15HD

(Standard 35R & Optional 44R)


00751034 a/r Clutch Assembly, Center Gearbox (Items 1 thru 6B)00758824 a/r Clutch Assembly, Wing Gearbox (Items 1 thru 6B)

1. 00748826 1 Drive Plate2. 00748833 2 Friction Disc Facing3. 00748830 1 Adjusting Nut4. 00748829 1 Hub5. 00748831 3 Bellville Spring, Center Section Clutch Only

00748831 2 Bellville Spring, Wing Section Cluch Only6. 00748832 1 Pressure Plate (Front Plate Only)6B. 00748834 1 Back Plate (Back Plate Only)

00751129 1 Drive Plate Asy, Front & Back Plates (6 & 6B)7. 00612703 1 Retaining Ring8. 00409200 a/r Yoke & Bushing, 35R Driveline

00751243 a/r Yoke & Bushing, 44R Driveline9. 271105B5 1 Bushing Only

To Adjust this Clutch. Tighten Item 3 Adjusting Nut untill all the Slack is removed and all thecomponents are touching as shown above. Make a reference Mark on the Adjusting Nut andcomponents, this will show how many turns you make. Tighten adjusting Nut an additional2-1/8 turns, this is the same for the Center Gearbox clutch and the Wing Clutches.

66B

Gearbox InputShaft

1

2

3

4

5

8

7

2

9

3 Spring Clutch usedon Center Gearbox &

2 Spring Clutch onWing Driveline. DONOT switch these

from Center to Wing

Oct. 1982to

Jun. 1985

TK15HD-39980to

TK15HD-43293

Used with Standard35R and Optional

44R Drivelines


Used with Cat IV Drivelines


(Standard Cat IV)

Jul. 1985to

May 1987

TK15HD-43294to

TK15HD-46051


Item Part No. Qty DescriptionCat IV

00754200 a/r Clutch Assembly1. 00752442 8 Bolt & Nut2. 00754203 1 Outer Flange3. 00754201 1 Clutch Plate4. 00754202 4 Friction Disc5. 00754300 1 Clutcu Body, 1-3/4" X 60 Spline6. 00752903 2 Bolt and Nut7. 00754314 1 Plate with Holes8. 00754301 1 Spacer Bearing9. 00754302 1 Clutch Yoke, Cat IV Universal joint10. 00754303 8 Coil Springs11. 00754304 1 Dirt Shield

NOTE: To Adjust this clutch, tighten adjusting Bolts (item 1) untill all the slack is removed andall the components are touching as shown above. Continue to tighten Nut untill the Springmeasures 1-5/16" long when compressed, this will set clutch at correct break-a-way Torque.

1

2

3

4

5

6

7

8

9

104

11

Hole for UniversalJoint Cap mea-sures 1-3/16" dia.Cat IV Driveline



Used with Cat V Drivelines


(Optional Cat V)

Jul. 1985to

May 1987

TK15HD-43294to

TK15HD-46051


Item Part No. Qty DescriptionCat V

00753881 a/r Clutch Assembly1. 00754199 8 Bolt & Nut2. 00754203 1 Outer Flange3. 00754201 1 Clutch Plate4. 00754202 4 Friction Disc5. 00754300 1 Clutcu Body, 1-3/4" X 60 Spline6. 00752903 2 Bolt and Nut7. 00754314 1 Plate with Holes8. 00754301 1 Spacer Bearing9. 00754083 1 Clutcn Yoke, Cat V Universal joint10. 00754303 8 Coil Springs11. 00754304 1 Dirt Shield

NOTE: To Adjust this clutch, tighten adjusting Bolts (item 1) untill all the slack is removed andall the components are touching as shown above. Continue to tighten Nut untill the Springmeasures 1-5/16" long when compressed, this will set clutch at correct break-a-way Torque.

1

2

3

4

5

6

7

8

9

104

11

Hole for UniversalJoint Cap mea-sures 1-3/8" dia.Cat V Driveline



Item Part No. Qty. Description

00749003 -- Gearbox Asy(540 RPM)

1 00749477 1 Main Housing2 00749478 1 Cover3 00749479 - Locking Compound4 00749480 1 Cap5 00749481 2 Housing Divider6 00749482 1 Shaft, Blade7 00749483 2 Shaft, Side Output8 00749484 1 Shaft, Input9 00749485 1 Retaining Ring10 00749486 1 Retaining Ring11 00749487 3 Gear, (17 Tooth)12 00749488 1 Bearing Cup13 00749489 1 Seal14 00757533 1 Bearing Cup15 00749491 1 Bearing Cone


16 00749492 1 Bearing Cup17 00749493 1 Bearing Cone18 00749494 1 Bearing Cone19 00749495 3 Cotter Pin20 00749496 2 Bearing Cup21 00749497 2 Bearing Cone22 00749498 2 Bearing Cup23 00749499 2 Bearing Cone24 00749500 1 Retaining Ring25 00749501 2 Seal26 00749502 1 Plug27 00749503 4 Bolt, Hex Head28 00749504 4 Lockwasher29 00749505 14 Bolt, Hex Head30 00022200 14 Lockwasher31 00749507 1 Plug, Vent

Continued next page

GEARBOX, DIVIDERCENTER SECTION

TK15 & TK15HD

May 1978to

May 1987

TK15-36783to

TK15HD-46051


19,36,45

1122,23

520,21

25

7

29,30 29,30

725

20,215

22,23

11

19,36,45

4,39

TopView

1-3/8" X 6Spline

1-3/8" X 6Spline

1-3/8" X 6Spline


Torque Item 43 to 100 ft. lbs.

Item Part No. Qty.DescriptionContinued from Previous Page

32 00749508 1 Plug33 00749509 1 Seal34 00749510 1 Bearing Cup35 00749511 1 Bearing Cone36 00749512 3 Nut, Slotted37 00749513 3 Shim, Fiber .005"

00749514 3 Shim, Alum .007"00749515 1 Shim, Alum .020"

38 00749516 1 Shim, Alum .005"00749517 2 Shim, Alum .007"00749518 1 Shim, Alum .020"

39 00749519 2 Shim, .005"00749520 2 Shim, .007"

40 00748539 4 Nut

GEARBOX, DIVIDERCENTER SECTION

TK15 & TK15HD

Note: Torque Item 40 to100 ft. lbs.

Item Part No. Qty.Description

41 00748538 4 Bolt42 00003901 4 Lockwasher43 00749524 1 Gear, (25 Tooth)44 00749525 1 Gear, (17 Tooth)45 00749526 3 Washer46 00606200 1 Washer47 00606100 1 Nut48 00606000 1 Cotter Pin

RightSideView 6

13

34,35

12,15 9

40,41,42

4419,36,45

1026

16,17

4,39

27,28

1

11 24 43 383,29,30

318

3314,15

FrontBack

46, 47, 48

1-3/8" X 6Spline

2" taperedX 15 Spline

May 1978to

May 1987

TK15-36783to

TK15HD-046051




GEARBOX ASYWING SECTIONTK15 (540 RPM)

May 1978to

Sept. 1982

TK15-36783to

TK15-39979

1234512345123451234512345

123456123456

1

2

3

4

5

6

7

8

9

10

11

12

13 14, 18

15

16

17

20,21,22

18,19

23

24 25

7

7

26

1-3/8" X 6Spline

1-1/2" Tapered X 12Spline

6 Bolt Input Shaft Bearing Cover



00749008 -- Gearbox Assembly, LH Wing (Input Gear Rear)

00748784 -- Gearbox Assembly, RH Wing (Input Gear Front)

1. 00748783 1 Seal, Output Shaft

2. 00748782 1 Cap, Bearing Retainer

3. 00748781 a/r Shim

4. 00748780 1 Gearbox Housing, Main

5. 00748778 1 Shaft, Output

6. 00564100 2 Retaining Ring

7. 00563700 3 Ball Bearing

8. 00748777 1 Gear, Output (15 Tooth)

9. 00564800 1 Ball Bearing

10. 00748776 1 Input Shaft

11. 00748775 1 Gear, Input (22 Tooth)

12. 00564500 1 Retaining Ring

13. 00564400 a/r Shim

14. 00563300 6 Bolt

15. 00564300 1 Input Bearing Cover

16. 00564200 1 Seal, Input

17. 00564900 1 Plug, Pipe

18. 02161100 10 Lockwasher

19. 00563200 4 Bolt

20. 00749127 4 Bolt, Gearbox to Deck Mounting Bolts (Not Shown)

21. 00749136 4 Locknut

22. 00010300 4 Lockwasher

23 00606200 1 Washer

24 00606100 1 Slotted Nut

25. 00751130 1 Wire Retainer

26. 00753630 1 Fill Plug

GEARBOX ASYWING SECTIONTK15 (540 RPM)

Note: You can ID these gearboxes by the Ball Bearings, a 1-3/8" X 6 SplineInput Shaft, a 1-1/2" X 12 Spline Output Shaft (at Blade Hub), and a 6 BoltInput Shaft Cover (item 15) with 1 Pipe Plug. When installing Item 20, 21& 22, Torque to 100 ft. lbs.

May 1978to

Sept. 1982

TK15-36783to

TK15-39979




Oct. 1982to

Apr. 1986

TK15HD-39980to

TK15HD-44814

GEARBOX ASYWING SECTION

TK15HD (540 RPM)

123456123456123456123456123456123456123456

1234512345123451234512345123451234512345

18,19

26,27,282221

24,25

23

29

3031

1

17,19

16

20

103,4

2

9

8

11

15

3,4

7 5 6 13,14

13,14

2" Tapered X 15Spline Output

Shaft

8 Bolt InputShaft Bearing

Cover



Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051


TK15HD (540 RPM)


00752141 -- Gearbox Assembly, LH Wing00752140 -- Gearbox Assembly, RH Wing

1. 00752362 1 Gearbox Housing, Main2. 00752363 1 Shaft, Input3. 00748525 2 Bearing Cup4. 00748527 2 Bearing Cone5. 00752364 1 Gear, Input (22 Tooth)6. 00748533 1 Spacer7. 00748526 3 Retaining Ring8. 00752365 1 Side Housing, Front Bearing Cover9. 00748536 1 Seal, Input10. 00564900 1 Plug, Oil Fill11. 00752307 1 Plug, Magnetic12. 00752407 1 Plug, Oil Level (Not Shown)13. 00012101 8 Lockwasher14. 00563300 8 Bolt15. 00748531 a/r Shim16. 00752366 1 Shaft & Pinion Gear 15 Tooth, Output17. 00748537 1 Bearing Cup18. 00020600 1 Bearing Cup19. 00748522 2 Bearing Cone20. 00752156 1 Spacer21. 00752155 1 Bearing Retainer Cap22. 00748519 1 Seal, Output23. 00748520 a/r Shim24. 00001300 4 Lockwasher25. 02044000 4 Bolt26. 02880900 4 Bolt27. 00037200 4 Nut28. 00003901 4 Lockwasher29. 06006200 1 Flatwasher30. 00606100 1 Slotted Nut31. 00751130 1 Lockwire

NOTE: The above gearboxes will be replaced as an assembly by Gearbox # 00752140A& 00752141A. The best way to ID these replacement Gearbox is by the teeth on Gears,19 input and 13 on output. The Output shaft Gear is not attached to output shaft as thegearboxes above are. The output shaft will not use a Spacer (item 20) as the abovegearbox does. Some parts will not interchange unless Gears and Output Shaft arechanged together from old Gearbox to replacement Gearbox. A Replacement Gearboxwill replace the old one complete as an assembly.



1

2

3

4

5 67

8

9

10

11

18

13, 14

3

19

4

20

17

19

16

26

27,28

29

21

30

2224,25

31

23

1-3/8" x 6SplineInput Shaft

2" Tapered X 15Spline Output Shaft


TK15HD (540 RPM)

May 1986to

May 1987

TK15HD-44815to

TK15HD-46051



00752140A -- Gearbox Asy (540 RPM) Input Gear in Front (Shown)00752141A -- Gearbox Asy (540 RPM) Input Gear in Back

1 00752362 1 Main Housing2 00752363 1 Input Shaft3 00748525 2 Bearing Cup4 00748527 2 Bearing Cone5 00755505 1 Gear, Input 19 Tooth (540 RPM)6 00748533 1 Spacer7 00748526 Snap Ring8 00752365 1 Side Housing9 00748536 1 Seal10 00564900 1 Plug11 00752307 1 Plug12 00752407 1 Plug (Not Shown)13 00012101 8 Lockwasher (Not Shown)14 00563300 8 Bolt (Not Shown)15 00748531 a/r Shim16 00755507 1 Output Shaft17 00748537 1 Bearing Cup18 00020600 1 Bearing Cup19 00748522 2 Bearing Cone20 00755506 1 Gear, Output 13 Tooth (540 RPM)21 00752155 1 Bearing Retainer Cap22 00748519 1 Seal23 00748520 a/r Shim24 00001300 4 Lockwasher25 02044000 4 Bolt26 02880900 4 Bolt27 00037200 4 Nut28 00003901 4 Lockwasher29 00748547 1 Flat Washer (Blade Hub Retaining)30 00606100 1 Nut (Blade Hub Retaining)31 00606000 1 Cotter Pin (Blade Hub Retaining)

Note: a/r = Use Qty. As Required

NOTE: These Gearboxes are replacement for # 00752140 & # 00752141, This Gearbox Has a 1-3/8" X 6 Spline Input Shaft & 2" Tapered X 15 Spline Output Shaft with No Lower Bearing Spacer.The Front Bearing Cover has 3 pipe plugs (2 large & 1 small) that screw into it, Some Parts willnot interchange with older Style unless mulitiple parts are changed (Output Shaft)


TK15HD (540 RPM)

TK15HD-44815to

TK15HD-46051

May 1986to

May 1987



GEARBOX SHIELDCENTER DIVIDERTK15 & TK15HD

Item Part No. Qty. Description00750909 -- Center Gearbox Shield Assembly

1. 00750918 1 Center Gearbox Safety Shield2. 00750927 1 Support Angle3. 00757735 2 Mount Strap4. 00750915 1 Inspection Window Cover5. 00004000 2 Wing Nut6. 00750919 1 Front Mount7. 00022200 10 Lockwasher8. 00999316 8 Nut9. 00999314 6 Bolt10. 00604800 ref. Bolt11. 00019700 6 Flatwasher12. 00024100 2 Flatwasher13. 00017000 2 Lockwasher

1

2

3

3

4

6

7

8

5, 12, 13

9

1011

Bolts already in Deck

May 1978to

May1987

TK15-36783to

TK15HD46051



GEARBOX SHIELDWING GEARBOX

TK 15

Item Part No. Qty. Description00750903 -- Wing Gearbox Shield Assembly

1. 00750906 1 Wing Gearbox Safety Shield2. 00750902 2 Front Mount3. 00750908 1 Rear Mount4. 00999314 4 Bolt5. 00999316 6 Nut6. 00022200 6 Lockwasher7. 00019700 4 Flatwasher8. 00563300 ref Bolt, These Bolts already in Gearbox9. ------------- ref. Bolt, These Bolts already in Deck

Bolts already in deck

1

2

345

6

7

8

8

2

May 1978to

Sept. 1982

TK15-36783to

TK15-39979

9



GEARBOX SHIELDWING GEARBOX

TK 15HD

Item Part No. Qty. Description00752314 -- Wing Gearbox Shield Assembly

1. 00750906 1 Wing Gearbox Safety Shield2. 00751135 2 Front Mount3. 00752149 1 Rear Mount4. 00999314 4 Bolt5. 00999316 6 Nut6. 00022200 6 Lockwasher7. 00019700 4 Flatwasher8. 00563300 ref Bolt, These Bolts already in Gearbox9. ------------- ref. Bolt, These Bolts already in Deck

Bolts already in deck

1

2

345

6

7

8

8

2

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051


9



NOTES




00750950 -- Winch Assembly1. 00750936 1 Winch2. 00000801 1 Cable Assembly (includes Items 3, 4 & 5)3. 00000800 1 Cable Only4. 02024600 1 Cable Thimble5. 00001000 1 Cable Clamp

WINCH ASYTK15 & TK15HD

12, 34,5

May 1978to

May 1987

TK15-36783to

TK15HD-46051




1. 00750524 1 Winch & Cylinder Support Stand Weldment2. 00750950 1 Winch Assembly (See Previous Page)3. 00001200 4 Nut4. 00001300 4 Lockwasher5. 00748823 4 Bolt6. 00013901 2 Nut7. 00012101 2 Lockwasher8. 00011400 2 Bolt9. 00750578 1 Retaining Arm, RH10. 00751131 1 Retaining Arm, LH11. 00008900 2 Stay Pin12. 00750585 1 *RH Wing Cylinder Lift Kit. (Optional Equipment)13. 00059000 2 Bolt14. 00695100 2 Locknut15. 00750311 ref. Bolt16. 00001400 ref. Flatwasher17. 00750998 1 *LH Wing Cylinder Lift Kit. (Optional Equipment)18. 00011100 2 Flatwasher

*Note: Wing Cylinder Lift Kits include, Cylinder, Hose, Fitting and mounting Pins / Bolts tomounr Cylinder.

WINCH & CYLINDER STANDTK15 & TK15HD

10

17

1

3, 4 , 5

2,6,7,8,18

13, 149

12

11

14,15,16

May 1978to

May 1987

TK15-36783to

TK15HD-46051





00751227 -- Control Rod Assembly (Items 1, 2, 3 & 4)1. 00751162 1 Rear Lift Rod Weldment2. 00748768 1 Turnbuckle3. 00059500 1 Nut4. 00750473 1 Lift rod Weldment5. 00751224 1 Rear Level Lift Pin6. 00162803 1 Front Level Lift Pin7. 02022300 4 Cotter Pin8. 00002701 4 Flatwasher

CONTROL ROD ASYTK15

Note: Qty Shown for 1 Control Rod, 2 Control Rods used on Mower.

1 23 45 6, 7, 8

May 1978to

Sept. 1982

TK15-36783to

TK15-39979



CONTROL ROD ASYTK15HD

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051



00752563 -- Control Rod Assembly (Items 1, 2, 3 & 4)1. 00752565 1 TurnBuckle & Rear Lift Rod Weldment2. 00059500 1 Nut3. 00750473 1 Lift rod Weldment4. 00751224 1 Rear Level Lift Pin (Not Shown)5. 00162803 1 Front Level Lift Pin (Not Shown)6. 00000400 4 Cotter Pin (Not Shown)7. 00002701 4 Flatwasher (Not Shown)

Note: Qty Shown for 1 Control Rod, 2 Control Rods used on Mower.

1234123412341234

123456789123456789123456789123456789

123412341234

1 2 34



1. 00751087 1 Axle Arm Weldment, RH Single Whl (Not Shown)00751088 1 Axle Arm WeldMent, LH Single Whl (Shown)

2. 00751035 1 Rubber Mount Disc3. 00751105 2 Bolt4. 00001300 2 Lockwasher5. 00750477 2 Bolt6. 02030300 2 Locknut7. 02822500 2 Flatwasher8. 00751224 ref Control Link Rod Pin9. 00751080 1 Shock Absorber Weldment10. 00750609 a/r Hub Assembly, (Not Shown)11. 00750460 ref Spindle, Single Wheel (Welded into Axle Arm)

NOTE: Wheel Hubs are NOT included in Axle Assembly and are listed here forreference only, See Wheel Hub Parts Page for Wheel Hub Parts break down.

AXLE ARM - CENTER AXLESINGLE WHEEL

TK15

1

2 3

4

5

6

7

7

8

9

May 1978to

Sept. 1982

TK15-36783to

TK15-39979



1. 00752299 1 Axle Arm Weldment, RH Single Whl (Not Shown)00752301 1 Axle Arm WeldMent, LH Single Whl (Shown)

2. 00751035 1 Rubber Mount Disc3. 02774400 2 Bolt4. 00001300 2 Lockwasher5. 00016700 2 Bolt6. 02030300 2 Locknut7. 02822500 2 Flatwasher8. 00751224 ref Control Link Rod Pin9. 00751080 1 Shock Absorber Weldment10. 00750609 a/r Hub Assembly, (Not Shown)11. 00751105 1 Bolt12. 00752278 1 Bolt13. 00750460 ref Spindle, Single Wheel (Welded into Axle Arm)NOTE: Wheel Hubs are NOT included in Axle Assembly and are listed here forreference only, See Wheel Hub Parts Page for Wheel Hub Parts break down.

AXLE ARM - CENTER AXLESINGLE WHEEL

TK15HD

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051

1

2 3

4

5

6

7

7

8

9

12

11

13



AXLE ARM - CENTER AXLEDUAL WHEEL

TK15


1. 00751086 1 Axle Arm Weldment, LH or RH Dual Whl (Shown)2. 00751035 1 Rubber Mount Disc3. 00751105 2 Bolt4. 00001300 2 Lockwasher5. 00750477 2 Bolt6. 02030300 2 Locknut7. 02822500 2 Flatwasher8. 00751224 ref Control Link Rod Pin9. 00751080 1 Shock Absorber Weldment10. 00750609 a/r Hub Assembly, (Not Shown)11. 00750648 ref Spindle, Dual Wheel (Welded into Axle Arm)


1

23

4

5

6

7

8

9

May 1978to

Sept. 1982

TK15-36783to

TK15-39979


AXLE ARM - CENTER AXLEDUAL WHEEL

TK15HD


1. 00752300 1 Axle Arm Weldment, LH or RH Dual Whl (Shown)2. 00751035 1 Rubber Mount Disc3. 00751105 2 Bolt4. 00001300 2 Lockwasher5. 00016700 2 Bolt6. 02030300 2 Locknut7. 02822500 2 Flatwasher8. 00751224 ref Control Link Rod Pin9. 00751080 1 Shock Absorber Weldment10. 00750609 a/r Hub Assembly, (Not Shown)11. 00752278 1 Bolt12. 00750648 ref Spindle, Dual Wheel (Welded into Axle Arm)


Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051


1

23

4

5

6

7

8

9

11

12


AXLE ARM - WING AXLETK15 & TK15HD


00750540 -- Axle Arm Asy, RH (Shown) w/ Items 2,3,4, & 800750541 -- Axle Arm Asy, LH (Not Shown) w/ Items 2,3,4, & 8

1 00750493 1 Axle Arm Weldment, RH (Shown)00750494 1 Axle Arm Weldment, LH (Not Shown)

2 02030300 1 Locknut3. 00750479 1 Bolt4. 00750518 1 Shock Absorber Rod5. 00750727 1 Long Spring Retainer6. 00750730 1 Short Spring Retainer7. 00750739 1 Spring8. 00750481 1 Shock Absorber Pin9. 00059500 4 Jam Nut10. 00750609 a/r Hub Assembly, (Not Shown)11. 00750460 ref Spindle, Single Wheel (Welded into Axle Arm)


1

2, 3

56

4

7 8

9

9 10

Mower Deck

May 1978to

May 1987

TK15-36783to

TK15HD-46051


WHEEL HUBTK 15

Item Part No. Qty. Description00750609 -- Wheel Hub Asy. (w/ Items 1 thru 10)

1. 00750610 1 Wheel Hub w/ Bearing Cups2. 00751137 1 Bearing Cup & Cone Asy (Outer)

00750611 -- Bearing Cone Only (Outer)00750621 -- Bearing Cup Only (Outer)

3. 00751138 1 Bearing Cup & Cone Asy (Inner)00750612 -- Bearing Cone Only (Inner)00750620 -- Bearing Cup Only (Inner)

4. 00750613 5 Stud Bolt5. 00750614 5 Lug Nut6. 00750615 1 Nut7. 00750616 1 Seal8. 00000400 1 Cotter Pin9. 02817200 1 Dust Cap10. 00750618 1 Washer, Keyed11. 00750460 ref Spindle, Single Wheel (Welded into Axle Arm)12. 00750648 ref Spindle, Dual Wheel (Welded into Axle Arm)

NOTE: This Wheel Hub will be replaced by later style Wheel Hub, if ordering # 00750609 or # 00750610 later Style Hub w/ Bearings will be shipped . New Hub will fit the Spindles.

May 1978to

Sept. 1982

TK15-36783to

TK15-39979

1

23

4

5

6

7

8

9

10

11,12

Note: This Hub did not have agrease fitting and had to bedis-asembled every 6 monthsto pack Bearings with grease.Replacement Hub will havegrease fitting in it.


WHEEL HUBTK15HD

Item Part No. Qty. Description00752753 -- Wheel Hub Asy. (w/ Items 1 thru 10)

1. 00752752 1 Wheel Hub w/ Bearing Cups2. 00753721 1 Bearing Cup & Cone Asy (Outer)

00752747 -- Bearing Cone Only (Outer)00752748 -- Bearing Cup Only (Outer)

3. 00753720 1 Bearing Cup & Cone Asy (Inner)00752749 -- Bearing Cone Only (Inner)00752750 -- Bearing Cup Only (Inner)

4. 00752177 5 Stud Bolt5. 00750614 5 Lug Nut6. 00750615 1 Nut7. 00750616 1 Seal8. 00000400 1 Cotter Pin9. 00752751 1 Dust Cap10. 00750618 1 Washer, Keyed11. 00752176 1 Grease Fitting12. 00750460 ref Spindle, Single Wheel (Welded into Axle Arm)13. 00750648 ref Spindle, Dual Wheel (Welded into Axle Arm)14. 00753973 ref Dust Cap Protector, Special Order (Not Shown)

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-460511

23

4

5

6

7

8

9

10

12,13

Note: This Hub did have agrease fitting and could begreased without dis-asemblyto pack Bearings with grease.

11(TK15HD-46051 ended

production on this model)


WHEEL AND TIRE ASYTK15 & TK15HD

May 1978to

May 1987

TK15-36783to

TK15HD-46051

2

3

4, 5

1 wheel only

Install Flat Side of LugNut Against Wheel as

Shown

Laminated Tire orFoam Filled Tire

Wheel BoltsLugnuts

Ribbed Implement Tire

Place Conical Side ofLugnut against Wheel

See Side of Tire forMaximum Pressure

Wheel Bolts

Lugnuts

Maximum InflationPressure 50 PSI Also

See Decal # 00762608

Airplane Tire



WHEEL AND TIRE ASYTK15 & TK15HD

Item Part No. Description

1 00008700 Wheel, 15 x 5.00 DC (Wheel Only) (Fig. 2)

2 00749698 Rib Implement - Tire & Wheel Complete (Fig. 2)

3 00025200 Laminated Puncture-Proof Tire & Wheel

Asy (21" OD) 6.00 x 9 (Fig. 1)

4 00749700 Used Airplane Tire & Wheel 25.5 X 14" (Fig. 2)

00766911 Used Airplane Tire & Wheel Foam Filled

22 X 6.6/6.75 X 10 (use 00766911A in Pairs) (Fig. 1)

00766911A Used Airplane Tire & Wheel Foam Filled (Fig. 1)

24 X 7.7 X 10

5 00764721 Recapped Airplane Tire & Whl 27.75 X 8.75 X 14.5 (Fig. 2)

00750016 Recapped Airplane Tire & Wheel 22 X 5 X 12 Split (Fig. 2)

Wheel (use 00749700 A/R for replacement)

NOTE:It is VERY IMPORTANT on some types of Tires and Wheels how they are mounted, thedirection of travel, the Air Pressure, the way they bolt together, the way the Lug Nuts are

installed and/or other special features that may be special only to that tire and wheel.ALWAYS check for any special instructions for the type Tire and Wheel being used

before ordering or installing any Wheels or Wheel components.

SOME WHEELS LISTED ABOVE WERE NOT USED ON THIS MODEL.Wheeld listed above are the only wheels available at ths time. Be sure to check oldwheels for size. Wheel Bolt pattern is the same only wheel size may be different.

LUGNUT MUST be mounted correctly according to Wheel Design

Lugnut

Conical SideLugbolt

Wheel

Hub

Figure 1

Lugbolt

Wheel

Hub

Figure 2

Lugnut

Conical Side

If Flat Sided Hole If Cone Sided Hole

TK15-36783to

TK15HD-46051

May 1978to

May 1987




1. 00554600 1 Ratchet Jack Assembly (Items 1,2 & 3)2. 00748714 2 Pin (Use # 0581000003)3. 00748715 4 Hair Pin clip4. 00748717 2 Rivit, Handle Pins (NLF)

NOTE: The Ratchet Jack was an Optional Order item and was offered in place ofhydraulic cylinders for the Level Lift.

RATCHET JACK ASYTK 15

1

2

2

3

3

May 1978to

May 1987

TK15-36783to

TK15HD-46051

4





00750991 -- Skid Shoe Kit, Wings1. 00750993 1 Skid Shoe, RH Wing

00750989 1 Skid Shoe, LH Wing2. 02716500 4 Locknut (2 ea. Skid Shoe)3. 00749171 4 Bolt (2 ea. Skid Shoe)

NOTE: If Skid Shoe Mounting Holes do not align. Skid shoes may require modifica-tion to the Wing Band. See Drawing # 00750992 for directions for mounting SkidShoe Kit.

1

2

3

SKID SHOETK15 & TK15HD

May 1978to

May 1987

TK15-36783to

TK15HD-46051



NOTES




00750938 -- Blade Bar Assembly, ( Items 1 thru 5 Only)1. 00750500 1 Blade Bar Weldment2. 00750788 2 Blade, Updraft (Use # 00752972 Blade Set)3. 00735900 2 Blade Bolt (Use # 00752827 Blade Bolt)4. 00748000 2 Lockwasher5. 00747900 2 Nut6. 00606200 1 Washer (Use # 00748547 Washer)7. 00606100 1 Nut, Slotted8. 00606000 1 Cotter Pin (Use # 00751130 Wire)

NOTE: This Blade Bar has a 2" X 15 Spline Tapered Hub where it fits onto Blade Shaftof Gearbox. Center Section Blades are CCW Rotation. Blades are no longer furnished as indi-vidual Blades, use Blade Set # 00752972 (CCW) for Center & LH Wing and # 00752971 (CW)for RH Wing. These are Sets of 2 matched Blades per Part Number. NO Blade Pan Option avail-able

BLADE CARRIERCENTER SECTION

TK15

May 1978to

Sept. 1982

TK15-36783to

TK15-39979

1

22

33

44

5 5

6

7

8

2" X 15 SplineTapered Hub




00750938 -- Blade Bar Assembly, ( Items 1 thru 5 Only)00752153 -- Blade Pan Assembly, (Items 1 thru 5 Only)

1. 00750500 1 Blade Bar Weldment00752146 1 Blade Pan Weldmnet (Not Shown)

2. 00750788 2 Blade, Updraft (Use # 00752972 Blade Set)3. 00735900 2 Blade Bolt (Use # 00752827 Blade Bolt)4. 00748000 2 Lockwasher5. 00747900 2 Nut6. 00606200 1 Washer (Use # 00748547 Washer)7. 00606100 1 Nut, Slotted8. 00606000 1 Cotter Pin (Use # 00751130 Wire)

NOTE: This Blade Bar has a 2" X 15 Spline Tapered Hub where it fits onto Blade Shaftof Gearbox. Center Section Blades are CCW Rotation. Blades are no longer furnished as indi-vidual Blades, use Blade Set # 00752972 (CCW) for Center & LH Wing and # 00752971 (CW)for RH Wing. These are Sets of 2 matched Blades per Part Number. Blade Pan Option was notoffered prior to this Oct. 1982.

BLADE CARRIERCENTER SECTION

TK15HD

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD-46051


1

22

33

44

5 5

6

7

8




BLADE CARRIERWING SECTION

TK15


00750939 -- Blade Bar Asy RH Wing, ( Items 1 thru 5 Only)00750937 -- Blade Bar Asy LH Wing, ( Items 1 thru 5 Only)

1. 00750505 1 Blade Bar Weldment, RH or LH Wing2. 00750787 2 Blade, Updraft RH Wing (Use # 00752971 Blade Set)

00750788 2 Blade, Updraft LH Wing (Use # 00752972 Blade Set)3. 00735900 2 Blade Bolt (Use # 00752827 Blade Bolt)4. 00748000 2 Lockwasher5. 00747900 2 Nut6. 00606200 1 Washer (Use # 00748547 Washer)7. 00606100 1 Nut, Slotted8. 00606000 1 Cotter Pin (Use # 00751130 Wire)

NOTE: This Blade Bar has a 1-1/2" X 12 Spline Tapered Hub where it fits onto Blade Shaftof Gearbox. RH Wing Blades are CW Rotation and LH Wing Blades a CCW Rotation. Bladesare no longer furnished as individual Blades, use Blade Set # 00752972 (CCW) for Center &LH Wing and # 00752971 (CW) for RH Wing. These are Sets of 2 matched Blades per PartNumber.

May 1978to

Sept. 1982

TK15-36783to

TK15-39797

1-1/2" X 12 SplineTapered Hub

1

22

33

44

5 5

6

7

8



BLADE CARRIERWING SECTION

TK15HD

Oct. 1982to

May 1987

TK15HD-39980to

TK15HD46051



00752150 -- Blade Bar Asy RH Wing, ( Items 1 thru 5 Only)00752152 -- Blade Pan Asy RH Wing, (Items 1 thru 5 Only00752151 -- Blade Bar Asy LH Wing, ( Items 1 thru 5 Only)00752153 -- Blade Pan Asy LH Wing, (Items 1 thru 5 Only

1. 00752142 1 Blade Bar Weldment, RH or LH Wing00752146 1 Blade Pan Weldment, RH or LH Wing (Not Shown)

2. 00750787 2 Blade, Updraft RH Wing (Use # 00752971 Blade Set)00750788 2 Blade, Updraft LH Wing (Use # 00752972 Blade Set)

3. 00752827 2 Blade Bolt (Use # 00752827 Blade Bolt)4. 00748000 2 Lockwasher5. 00747900 2 Nut6. 00606200 1 Washer (Use # 00748547 Washer)7. 00606100 1 Nut, Slotted8. 00751130 1 Lock Wire

NOTE: This Blade Bar has a 2" X 15 Spline Tapered Hub where it fits onto Blade Shaftof Gearbox. RH Wing Blades are CW Rotation and LH Wing Blades a CCW Rotation. Bladesare no longer furnished as individual Blades, use Blade Set # 00752972 (CCW) for Center &LH Wing and # 00752971 (CW) for RH Wing. These are Sets of 2 matched Blades per PartNumber.

1

22

33

44

5 5

6

7

8




HYDRAULIC SCHEMATICTK15 & TK15HD

2,3,42,3,4

3,21 3,21

1 1

5 5

6 6

7

8

Left Wing Cyl.Right Wing Cyl.

22,23

22,23

11116

6

1010

9

9

15

14

22,23

22,23

16

12

13

17,1819,20

To Wing Cyl.w/ Detent

To TongueLift Cyl. w/o

Detent

Note: The 3 Spool Valvemust have "Detented FloatPositions for thr two wing CylSpools. If valve w/o Float isused excessive stress willbe induced into Deck.

May 1978to

May 1987

TK15-36783to

TK15HD-46051





00750585 1-ref RH Wing Cyl. Kit (Items 1,2,3,4,5,6,7)

00750998 1-ref LH Wing Cyl. Kit (Items 1,2,3,4,5,6,8)

00750584 1-ref Tongue Cyl. Kit (Items 6,9,10,11,12,13,14,15)

00750619 3-ref Hose kit Asy. (Items 16,17,18)

1. 00750398 1 Wing Cyl. Asy, LH or RH Wing

2. 00750311 2 Bolt

3. 00695100 4 Nut

4. 00001400 4 Flatwasher

5. 00750596 2 Breather Plug

6. 00035400 4 Fitting, 90 degree

7. 00750987 1 Hose

8. 00750986 1 Hose

9. 00750395 2 Tongue Cyl. Asy, L or R side

10. 00750208 2 Breather Plug

11. 00494800 2 Bushing

12. 00493900 1 Fitting, Tee

13. 00750553 1 Fitting, Nipple

14. 00750550 1 Hose

15. 00750549 1 Hose

16. 00750997 3 Hose

17. 00750368 3 Coupler, Quick Disconnect

18. 00751143 3 Fitting, Nipple

19. 00380200 a/r 3 Spool Valve, Open Center

20. 00750382 a/r 3 Spool Valve, Closed Center

21. 00059000 2 Bolt

22. 00652401 4 Cyl. Pin

23. 00606000 4 Cotter Pin

HYDRAULIC SCHEMATICTK 15 & TK15HD

May 1978to

May 1982

TK15-36783to

TK15HD-46051




TONGUE LIFT CYLINDERTK15 & TK15HD


00750395 -- Hydraulic Cylinder Assembly1. ------------- 1 Seal (See Seal Kit # 19)2. ------------- 1 Seal (See Seal Kit # 19)3. ------------- 1 Seal (See Seal Kit # 19)4. ------------- 1 Lockwire (See Seal Kit)5. ------------- 1 Seal (See Seal Kit # 19)6. ------------- 1 Gland (See Gland & Piston Kit # 20)7. 00652801 1 Barrel Asy.9. ------------- 1 Piston Seal (See Seal Kit # 19)10. ------------- 2 Piston Wiper Ring (See Seal Kit # 19)11. ------------- 1 Piston Seal (See Seal Kit item # 19)12. ------------- 1 Piston (See Gland & Piston Kit item # 20)13. ------------- 1 locknut (See Rod & Locknut Kit item # 21)14. 00750601 1 Clevis15. ------------- 1 Jamnut (See Rod & Locknut Kit item # 21)16. ------------- 1 Rod, (See Rod & Locknut Kit item # 21)17. 00652401 2 Clevis Pin18. 00606000 2 Cotter Pin19. 00750597 1 Seal Kit (Items 1, 2, 3, 4, 5, 9, 10 & 11)20. 00750598 1 Gland & Piston Kit (Items 6 & 12)21. 00750599 1 Rod & Locknut Kit (items 13, 15, 16)

12,3

45

6

79

1011

12

13

1415

16

17,18

17,18

May 1978to

May 1987

TK15-36783to

TK15HD-46051




WING LIFT CYLINDERTK15 & TK15HD


00750398 -- Hydraulic Cylinder Assembly1. 00750605 1 Barrel Assembly2. ------------- 1 Rod Weldment (See Rod & Locknut Kit item # 16)3. ------------- 1 Locknut (See Rod & Locknut Kit item # 16)4. ------------- 1 Piston (See Gland & Piston Kit item # 15)5. ------------- 1 Gland (See Gland & Piston Kit item # 15)6. ------------- 2 Piston Wiper Ring (See Seal Kit)7. ------------- 1 Piston Seal (See Seal Kit # 14)8. ------------- 1 Piston to Rod Seal (See Seal Kit # 14)9. ------------- 1 Gland Seal, Outer (See Seal Kit # 14)10. ------------- 1 Lockwire (See Seal Kit # 14)11. ------------- 1 Rod to Gland Seal (See Seal Kit # 14)12. ------------- 1 Rod to Gland Seal (See Seal Kit # 14)13. ------------- 1 Rod Wiper Seal (See Seal Kit item # 14)14. 00750602 1 Seal Kit (items 7, 8, 9, 10, 11, 12 & 13)15. 00750603 1 Gland & Piston Kit (items 4 & 5)16. 00750604 1 Rod & Locknut Kit (item 2 & 3)17. 00059000 1 Bolt18. 00695100 2 Nut19. 00750311 1 Bolt20. 00001400 2 Flatwasher

17,18

18,19,20

13

5

11,1210

9

1 283

6 7

4

May 1978to

Sept. 1982

TK15-36783to

TK15HD-46051




THREE SPOOL VALVETK15 & TK15HD


1 00380200 a/r Hydraulic Valve Assembly, Open Center00750382 a/r Hydraulic Valve Assembly, Closed Center

2. 00751139 2 Detent Kit3. 00751140 1 High Pressure Relief Valve Kit4. 00751142 3 Handle Assembly5. 00751141 1 Power Beyond Plug (Open Center Valve Only)6. 00751002 1 Plug, (Closed Center Valve Only)7. 00751358 ref Spring Return Repair Kit8. 00751556 ref Spool Seal Kit for Open Center Valve9. 00752056 1 Non Relief Valve Plug (Closed Center Valve Only)

NOTE: If ordering complete Valve Assembly a newer style Valve may be used, It will work foryour application but the Parts between the new valve and old may not interchange.

1

2

3

4

5

6

7

9

May 1978to

May 1987

TK15-36783to

TK15HD-46051



NOTES




00751101 -- Double Curtain Chain Guard Asy. (Shown)00751102 -- Single Curtain Chain Guard Asy. (Not Shown)

1. 00751057 1 Chain Guard Bracket (Single or Dbl Chain)2. 00751126 a/r Chain Links 6 links (Qty 29 f/ Single & 53 f/ Dbl Chains)3 00992000 a/r Cable4. 00001000 a/r Cable Clamp5. 00013300 3 Bolt6. 00002700 6 Flatwasher7. 00749137 3 Locknut

CHAIN GUARDFRONT CENTER SECTION

TK15 & TK15HD

7

7

7

6

6

6

5

5

5

6

6

61

2

3

4

May 1978to

May 1987

TK15-36783to

TK15HD-46051



CHAIN GUARDFRONT SIDE CENTER SECTION

TK15 & TK15HD



1. 00751060 1 Chain Guard Bracket (Single or Dbl Chain)2. 00751127 a/r Chain Links 8 links (Qty 4 f/ Single & 8 f/ Dbl Chains)3 00992000 a/r Cable4. 00001000 a/r Cable Clamp5. 02718900 2 Bolt6. 00019700 2 Flatwasher7. 05830901 2 Locknut8. 00022200 2 Lockwasher

Note: There are two of these used on the front Center Section, quanity above is for one side

1

2

3

3 4

4

56

7

86

May 1978to

May 1987

TK15-36783to

TK15HD-46051



CHAIN GUARDFRONT WING SECTION

TK15 & TK15HD



1. 00750567 1 Chain Guard Bracket (Single or Dbl Chain)2. 0371200103 a/r Chain Links 9 links (Qty 45 f/ Single & 90 f/ Dbl Chains)3 00992000 a/r Cable4. 00001000 a/r Cable Clamp5. 02718900 5 Bolt6. 00019700 10 Flatwasher7. 05803901 5 Locknut8. 00022200 5 Lockwasher

Note: There are two of these used, one each front Wing Section, This Chain Guard Assembly willfit the RH or LH Wing. Qty above is for one Wing LH or RH Side.

1

2

3

4

5

6

78

6

May 1978to

May 1987

TK15-36783to

TK15HD-46051



CHAIN GUARDREAR CENTER SECTIONOPEN OPTION - TK 15


00751208 1-NLF Chain Guard Asy, Dble Curtain. (Shown)00751209 1-NLF Chain Guard Asy, Single Curtain (Not Shown)

1. ------------ 1-NLF Chain Guard Bracket (Single or Dbl Chain)2. 0371200103 a/r Chain Links 9 links (Qty 40 f/ Single & 79 f/ Dbl Chains)3. 00750125 4 Z Bar Support4 00992000 a/r Cable5. 00001000 a/r Cable Clamp6. 02718900 8 Bolt7. 00019700 16 Flatwasher8. 05803901 8 Locknut9. 00022200 8 Lockwasher

Note: NLF = This Chain Guard used two side pieces with it # 00750894 double curtain or #00750893 single curtain (See Next Page). The above Chain Guard assemblies will be replaced by#00752274 double curtain and #00752275 single curtain. These replacemnt assemblies will notuse the two side assemblies at all. See next page for Rear Center Side Chain Guards.

1

2

3

4

5

67

7

7

7

6

9

98

8

4

Obsolete as an asy or as Parts,Shown as reference only. Re-placed by closed Chainguard,see next page. (Not offered onthe TK15HD)

May 1978to

Sept. 1982

TK15-36783to

TK15-39979



CHAIN GUARDREAR CENTER SECTION

CLOSED OPTIONTK15 & TK15HD


00751234 1-NLF Chain Guard Asy, Dbl Curtain. (Shown)00751239 1-NLF Chain Guard Asy, Sngl Curtain (Not Shown)

1. ------------ 1-NLF Chain Guard Bracket (Single or Dbl Chain)2. 0371200103 a/r Chain Links 9 links (Qty 40 f/ Single & 79 f/ Dbl Chains)3 00992000 a/r Cable4. 00001000 a/r Cable Clamp5. 02718900 4 Bolt6. 00019700 8 Flatwasher7. 05803901 4 Locknut8. 00022200 4 Lockwasher

Note: NLF = This Chain Guard used two side pieces with it # 00750894 double curtain or #00750893 single curtain (See Next Page). The above Chain Guard assemblies will be replaced by#00752274 double curtain and #00752275 single curtain. These replacemnt assemblies will notuse the two side assemblies at all. See next page for Rear Center Side Chain Guards.

1

2

3,4

56

78

6

May 1978to

May 1987

TK15-36783to

TK15HD-46051



CHAIN GUARDREAR CENTER SECTION SIDE

TK 15


00750894 2-NLF Double Curtain Chain Guard Asy. (Shown)00750893 2-NLF Single Curtain Chain Guard Asy. (Not Shown)

1. ------------- 2-NLF Chain Guard Bracket (Single or Dbl Chain)2. 0371200103 a/r Chain Links 9 links (Qty 7 f/ Single & 14 f/ Dbl Chains)3 00992000 a/r Cable4. 00001000 a/r Cable Clamp5. 02718900 4 Bolt6. 00019700 8 Flatwasher7. 05803901 4 Locknut8. 00022200 4 Lockwasher

Note: NLF = There were two of these used, one each Rear Center Section, these are no longeravailable as an assembly. They are replaced by a one piece assembly tha will replace both ofthese side Chains and the Rear Center Section. See the Rear Center Section on previous page.

1

56

6

7

8

4

43

2

3

May 1978to

Sept. 1982

TK15-36783to

TK15-39979

Not used on theTK15HD at all



CHAIN GUARDREAR WING SECTIONOPEN OPTION - TK 15


00751210 -- Chain Guard Kit, Dble Chain LH & RH Wing00751237 1 Chain Guard Asy. Dble Chain, RH Wing00751238 1 Chain Guard Asy. Dble Chain, LH Wing00751211 -- Chain Guard Kit, Sngl Chain, LH & RH Wing00751232 1 Chain Guard Asy. Sngl Chain, RH Wing00751233 1 Chain Guard Asy. Sngl Chain .LH Wing

1. 00751213 1 Chain Guard Bracket RH Wing (Single or Dbl Chain)00751218 1 Chain Guard Bracket LH Wing (Single or Dbl Chain)

2. 0371200103 a/r Chain Links 9 links (Qty 25 f/ Single & 48 f/ Dbl Chains)3. 00750783 8 Z Bar Support4 00992000 a/r Cable5. 00001000 a/r Cable Clamp6. 02718900 16 Bolt7. 00019700 32 Flatwasher8. 00022200 16 Lockwasher9. 05830901 16 LocknutNote: Above Chain Guard is replaced by the closed Chain Guard See next Page.

3,4

1

4, 53

4, 5

2

67

89

7

Obsolete as an asy or as Parts,Shown as reference only. Re-placed by closed Chainguard,see next page. (Not offered onthe TK15HD)

May 1978to

Sept. 1982

TK15-36783to

TK15-39979



CHAIN GUARDREAR WING SECTION

CLOSED OPTIONTK15 & TK15HD


00751210 -- Chain Guard Kit, Dble Chain LH & RH Wing00751237 1 Chain Guard Asy. Dble Chain, RH Wing00751238 1 Chain Guard Asy. Dble Chain, LH Wing00751211 -- Chain Guard Kit, Sngl Chain, LH & RH Wing00751232 1 Chain Guard Asy. Sngl Chain, RH Wing00751233 1 Chain Guard Asy. Sngl Chain .LH Wing

1. 00751213 1 Chain Guard Bracket RH Wing (Single or Dbl Chain)00751218 1 Chain Guard Bracket LH Wing (Single or Dbl Chain)

2. 0371200103 a/r Chain Links 9 links (Qty 25 f/ Single & 49 f/ Dbl Chains)4 00992000 a/r Cable5. 00001000 a/r Cable Clamp6. 02718900 7 Bolt7. 00019700 14 Flatwasher8. 00022200 7 Lockwasher9. 05830901 7 Locknut

4,5

4,52

6

7

8

9

7

1

May 1978to

May 1987

TK15-36783to

TK15HD-46051



CHAIN GUARDREAR WING RUBBER FLAP

TK15 & TK15HD


1 00752051 2 Rubber Flap2. 02718900 4 Bolt3. 00019700 6 Flatwasher4. 00022200 6 Lockwasher5. 00999316 4 Locknut6. 00751997 2 Flap Strap

1

2

33

4

45 6

May 1978to

May 1987

TK15-36783to

TK15HD-46051

TK15 & 15HD Archive Manual 08/03


TK15 & TK15HD (Terrain King)Archive Manual

ProductionMay 1978 (Start) TK15-36783

toSep. 1982 (End) TK15-39979

Oct. 1982 (Start) TK15HD-39980to

May 1987 (End) TK15HD-46051

Manual P/N 02980265

TK15 {TK15HD {

TK15 / TK15-HD - Alamo Industrial Industrial (Terrain King) 15 foot Flex Wing Mowers Model - 3...

Documents

Transcript of TK15 / TK15-HD - Alamo Industrial Industrial (Terrain King) 15 foot Flex Wing Mowers Model - 3...