LARGE FORMAT FIBER LASER CUTTING SYSTEM

A DIVISION OF FONON TECHNOLOGY INTERNATIONAL

This system will achieve a level of quality and detail that is unprecedented in the industry for laser cutting and engraving. It can cut/engrave aluminum, anodized aluminum, stainless steel, mild steel, copper, brass, non transparent plastics, plaques, create stencils, and more. It has a replaceable nesting basket and can perform effective N2, Ar or O2 gas-assisted cutting under pressures of up to 250 psi. Ease of installation gives the system “plug-and-play” characteristics and a quick startup time.

The Titan FLS 48 will help quicken production time and lower manufacturing costs. Fiber laser systems reduce the cost of ownership, maintenance and dramatically improve overall produc-tion quality. A high output laser power with low energy consumption, resulting in operating cost savings and a quick return on investment. Due to its direct drive motor with integrated software control, the Titan FLS 48 preserves a large amount of detail when cutting and engrav-ing. The software allows Laser Photonics to import any image into the software as a prepared solution for engraving/cutting.

Standard Features• Single pallet shuttle system for loading and unloading materials• High pressure gas assist N2, Ar or O2 gas-assisted cutting under pressures of up to 250 psi• Latest generation Ytterbium 2,000 to 5,000 watt CW upgradable fiber laser

(1,000 watt increments)• Software controlled X-Y orthogonality• Flatbed cutting table sizes: 1250mm x 2500mm, 1500mm x 3000mm, 2000mm x 4000mm. System dimensions meet international delivery standards• Class 1 laser safety enclosure

System Capabilities• Save valuable work & floor space, the unit has a relatively small foot print, is Ethernet ready and Plug & Play capable• Fully software-controlled mechanical geometry alignment on orthagonality eliminating special requirements for installation• No reeducation required for experienced CNC operators (G-code programing)• Fastest cutting speed on the market for comparable systems• Low power consumption• No optical system alignment, no laser service necessary• No laser service knowledge required from the operator• Highest cutting quality available from 1064 nm lasers• Lowest operating cost among all laser types• Ease of installation allows for quick start-up• No replacement parts on laser necessary• No beam delivery system maintenance• No alignment after optics replacement

Applications & Materials• Coated & Plated Metals• Thick Coating Removal• Aluminum• Anodized Aluminum• Deep Engraving• Opaque Plastics• Stainless Steel• Alloy Metals• Mild Steel• Copper And More

-2-

State of the Art Technology

The Titan FLS 48 � ber laser cutting system is a completely new state of the art design combining the latest developments in mo-tion engineering, PC based CNC control and fi ber laser technologies

It is the most advanced, compact, industrial grade, mid size, � ber laser cutting and engraving system available on the market

Provides low maintenance system with no laser service required

High electrical effi ciency, much less power consumption than comparable systems

Unique ability to cut highly re� ective materials such as aluminum, brass and copper

Proven multi-purpose laser material processing machine with a natural ability to cut intricate jobs with 5 – 10 watts as well as cut 1/4” steel

Standard nozzle: 1.2mm/dia. (consumption of assist gas is 30% of standard 2mm nozzle)

Easy to Operate State of the Art Product

• Fiber optic beam delivery system• Access from the front and back• Simple operation panel• Auto focus cutting head• Replaceable nesting basket• Native G-code CNC programming• Standard CNC control• 4’ x 8’ standard cutting table size with optional 5’ x 10’ and 6’ x 12’ table sizes

• 2000 to 5000 watt upgradeable fi ber laser• Available custom systems with up to 50,000 watt fi ber laser• Software controlled X Y orthogonality• High pressure gas assist N2, Argon or O2 gas-assisted• Cutting under pressures of up to 250 psi.• Class 1 laser safety enclosure• Processes most commonly used materials for 1064 nm laser wavelength

-3-

Titan FLS 48 Fiber Laser Cutting System

Benefits

• Highest cutting quality available from 1.06 mkm lasers• Latest generation ytterbium fi ber laser with up to 5000 watt CW• Fastest cutting speed on the market for comparable systems• No optical system alignment, no laser service necessary• Energy effi cient, low power consumption, no need for high power outlet• Software alignment on orthagonality• No laser service knowledge required from the operator• No alignment after optics replacement• No beam delivery system maintenance• Lowest operating cost among all laser types and environmentally friendly• No replacement parts on laser necessary• Save valuable work and fl oor space, the unit has a small footprint, is Ethernet ready and plug-&-play capable.• Ease of installation allows for quick start-up• Fully software controlled mechanical geometry alignment eliminating special requirements for installation• No re-education required for experienced CNC operators

-4-

State of the Art Fiber Lasers Laser of the 21st Century

• Leading the way in “green” manufacturing• No consumables ensures less waste and eco-friendly operation• The most advanced high power fi ber laser used in Laser Photonics cutting systems• Lowest beam divergence of any one micron laser for all power levels (large dynamic range)• A 5x smaller output beam spot size diameter than a CO2 laser• Lowest maintenance and operational costs among all industrial lasers• High electro optical effi ciency: only 10% power consumption compared to other laser systems• Low cooling requirements• Cost savings in ownership and eco-friendly• 2,000 to 5,000 watt upgradeable fi ber laser• Laser scalability goes up to 50,000 watts on custom systems• Ultra low power consumption in comparison with any other commercial lasers makes � ber lasers the laser of choice for 21st century “green” manufacturing.

Superiority of Fiber Lasers• Identical cut quality in any area of the cutting table without using sophisticated CNC beam collimators• Easy replaceble fi ber cable in emergency situations utilizing the integrated � ber coupler / optical switch• No maintenance or service is required on the fi ber laser making it ideal for 24/7/365 days a year of heavy duty industrial operation• No laser gas, gas delivery and control equipment, gas pumps or leackage detection• No mechanical moving parts or sophisticated optical components at all• No resonators to maintain, check, or align• No optical components to clean or replace• No system realignment• No beam delivery system purging and protection from contamination and industrial dust• Simple operation, like changing a light bulb, aff ordable by any level of CNC laser machining• Negligible cost of ownership in comparison with other laser types, where the main factor is depreciation. The laser system will last for 20 years.• Full power control range from 1 watt to 5000 watt opens the way to cut stencils and heavy duty steel on the same laser system, while on the other laser systems, minimal power is limited to the lasing threshold and is typically from 20% to 50% depending on laser type.

• Leading the way in “green” manufacturing• No consumables ensures less waste and eco-friendly operation• The most advanced high power fi ber laser used in Laser Photonics cutting systems

-5-

Fiber Laser Cutting Technology

Advantages of Fiber Laser Cutting

• Identical cut quality in any area of the cutting table without using sophisticated CNC controlled beam collimators• Easily replaceable fi ber cable in emergency situations utilizing the integrated fi ber coupler• 10, 20, 50 meters or more fi ber beam delivery cable provides the cost eff ective possibility to build laser cutting systems with an unlimited size cutting table• The cutting of aluminum, copper, brass, and high refl ective alloys is natural for fi ber lasers and impossible for CO2 lasers of comparable power• Due to very low heat levels, industrial cutting of the intricate shapes and patterns is an every day regular job for the fi ber laser• Full control of the laser power from 1-100% makes it a true universal tool for cutting of any material thickness limited only by the maximum power• 250 mkm cutting line width on 1/4” stainless steel and mild steel is unheard of in the CO2 laser material cutting world, resulting in less debris and more power savings• Superior edge quality for multiple material selection, cutting accuracy and intricacy makes fi ber laser cutting technology the most universal for industrial cutting applications

Intricate cutting is achievable at high speeds with a � ber laser using the automatic selection of N2 gas

The system using automatic selection between O2 and N2 gas. Selecting N2 for the slower intricate cuts and O2 for the faster outer areas

-6-

Fiber Laser Cutting Applications

• Mild steel• Stainless steel• Anodized aluminum• Aluminum• Aircraft Skins• Copper• Opaque plastics• Diff erent alloys• Coated and plated metals• Thick coating removal• Deep engraving• Stencils & masks• Vector and bitmap• Shipbuilding• Signmaking• Control panels• Plaques & awards and much more

Detailed and complex patterns can be created easily and quickly with our � ber laser systems. Vector and bitmap images can also be imported into the software for processing.

-7-

Titan FLS 48 Features & Specifications

The Titan FLS 48 � ber laser material processing system is a completely new state of the art design combining the latest developments in motion engineering, PC based CNC control and � ber laser technologies.

• Most compact design on the market for its application• Low maintenance system• No laser service required• Small spot size, 50% smaller than conventional laser systems.• Small kerfs width – 200 mkm on 1/8” steel.• 5x less power consumption than the competition, most energy-effi cient laser type.• Unique ability to cut highly refl ective materials such as aluminum, brass and copper.• A proven multi-purpose laser material processing machine with a natural ability to cut and engrave the intricate jobs with 5 – 10 watts as well as cut 1/4” steel.• 1000 watt laser source can cut up to 1/4” carbon steel, the 2000+ watt can cut up to 1/2”+ carbon steel.• Lowest running and maintenance costs on the market.• Standard nozzle: 1.2mm/dia. (consumption of assist gas is 30% of standard 2mm nozzle).

Electric power consumption 10.3 kw• Laser 5.0 kW• Chiller 3.4 kW• Titan FLS 48 1.9 kWEasy to operate:• Fiber optic beam delivery system• Access from front and back• Simple operation panel

• Native G-code programming• High performance / cost ratio.• Processes most commonly used materials for 1064 nm laser wavelength.

The Titan FLS 48 employs a new generation of diode pumped single mode CW ytterbium fi ber laser systems of near infrared spectral range (1060-1080nm) with a unique combination of high power, ideal beam quality, � ber delivery and high wall-plug effi ciency.

These laser systems possess a reliability that is unmatched by any other kind of solid state or gas laser system. Wide selectivity of operating wavelengths, ultra-low amplitude noise, high stability and ultra-long pump diode lifetime complete an impressive list of advantages of this modern � ber laser system.

-8-

Fiber Laser (3,000W) CO2 Laser (4,000W)

Laser System • Laser and power supplies • Computer and software • Motion system

A combination of GE Fanuc (optional) heavy duty industrial motion systems and revolutionary fiber laser technology offer an easy-to-use and efficient alternative to large, bulky Nd:YAG and CO2 systems for precision cutting applications. The motion systems also feature reliable worldwide support.

---

Reflectivity Much less power is required for cutting reflective materials like aluminum or copper since more of the laser energy is absorbed by the substrate. This allows for intricate high-quality cutting at higher efficiencies than comparable laser cutting systems.

---

Reliability MTBF (Mean Time Between Failure)

50,000 to 100,000 hours (estimated) Only around 20,000 hours

Power Consumption Electrical power requirements (1kW cost $.06 per hour based on working 250 days)

Very low power consumption A 3000W fiber laser requires 10kW of electrical power plus 5kW for a chiller with a total of 15kW. $1,350 per year 15kW per hour at 6 hr. shift $2,700 per year 15kW per hour at 12 hr. shift

An equivalent 4000W CO2 laser and chiller combination could be as high 250kW for operation.

$19,350 per year @ 215kW per hour at 6 hr. shift

$38,700 per year @ 215kW per hour at 12hr. shift

Maintenance

• No maintenance • No consumables • No cleaning or aligning of mirrors or beam path

Consumables: $17,500 gas use in 6 hr. shift $35,000 gas use in 12 hr. shift Nitrogen: 99.9999% pure CO�: 99.9999% pure Helium: 99.9999% pure Maintenance: $45,000 per year on an average 8 hr. shift

Power Efficiency Electrical Power Efficiency

Up to 50% Only as high as 20%

Beam Quality & Spot Size

TEM00 (<1.15) beam profile results in significantly higher power density directed to the material surface. Requires less power for the same result in comparison with CO2 systems

---

Optical Path/Beam Path Flexible Cable (up to 50m)

Mirrors and optical path Loss of beam quality and significant power drop-off

Cooling Requires smaller chillers than equivalent CO2 laser cutting systems ---

Total Cost of Ownership First Year

$1,350 yearly at 6hr. shifts $2,700 yearly at 12 hr. shifts

$81,850 yearly at 6 hr. shifts $118,700 yearly at 12 hr. shifts

Comparable Advantages of Fiber Lasers

Fiber Laser Technical SpecificationsFiber Laser Type Ytterbium Fiber Laser Operation Mode CW or Modulated Wave Length 1075 nm +/- 5 Output Power 2,000W standard, up to 5,000W optionalBeam Quality M2 <1.15 Polarization Random Maximum Modulation Frequency kHz 10 Electrical requirements V 240/380/460 Power consumption Total (kW) TBD

Fiber Laser 2000 Watt (kW) 7.0 Water Chiller (kW) TBD

Cutting System (kW) 3.0 Estimated diode life time (Hours) > 50,000Cooling method Water Maintenance required (None) Maintenance-free operation

-9-

Standard OptionalZ-axis travel 2” Precision ball screw Lens selection 100 mm 73 mm, 100 mm Auto focus height sensing unit Ultrasonic for all materials Capacitor for metalsHead Selection 3-Axis Cutting Head 5-axis Cutting Head

Industrial cutting head with crash protection built into the system interlock 1.5” up to 2000 watt laser with 60mm collimator 2” for lasers over 2000 watts; equipped with 120mm collimator

Nozzle selection 1.2 mm replaceable copper tip, handles up to 360psi Cartridge lens changer: 3.75” and 5”

Nozzle inspection: Automatic with vision system Nozzle reconditioning: Automatic if equipped with nozzle inspection system

1.5 mm sizes and 2.0 mm sizes availableCrash protection OptionalRed aiming beam OptionalProcess gas N2, O2 Programmable N2, O2, CO2 and

compressed air connections 3 gas lines: one dedicated to O2, two lines customizable

Cutting Head

Motion Systems Travel Method X-, Y and YS – (3 axis direct drive linear motion system)Control Method X-, Y1, YS and Z-axis G-code CNC controlled (Four axis

simultaneously controlled). Upgradeable to 6 axes. • PLO (Position Laser Output) ensures the best cutting quality • Programmable touch screen CNC operator panel

Speed to Laser Power Interpolation X, Y, V(Speed), P(Laser Power) interpolationTravel Distances X = 50"

Y = 98" Z = 2.0"

Feed Rate X = 1,200" / min Y = 1,200" / min

Rapid Rate X = 2,300" / min Y = 2,300" / min Z = 35" / min

Acceleration 2G acceleration standard; 3G optionalPositioning Speed X-Y axes up to 300 m/min. Z axis up to 30 m/min.Maximum Worksheet Loading Capacity 2000kg for single pallet, 1500kg for dual palletMaximum Work Area Up to 158” x 78” x 6” (4000 mm x 2000 mm x 150 mm)Repeatability 0.025 mm Encoder Resolution 0.001 mm Drive Feed Method Direct drive Assist Gas Type Selector Programmable selection Machine Table Height 33" [838 mm] Total Machine Weight Total (Lbs) 4,660 lbs (2100 kg)

• Cutting Machine: 3340 lbs (1500kg) • Water Chiller: 660 lbs (300kg) • Fiber Laser: 660 lbs (300kg)

Power Supply (only for machine) AC, 1 phase, 120 V, 3.0 kW Max.Air Supply (only for machine and when the shop air assisted cutting is used)

0.14 mpa (85 psi), 4.8x10-3 m3/min (9.9 ft3/min)

Gas Supply 360 psi max

Additional System Options• Autofocus system for general materials• Special Autofocus System for metals• DI Water Filter• Vacuum Table

• Assist Gas• Exhaust

• Vision System• Cutting Table• Fiber Coupler• Water Chiller

Cutting Head

Multi-Axis Cutting Head

-10-

-11-

Titan FLS 48 Envelope Drawing

Dimensions are formatted as: mm. [in.]

Advanced Control SoftwareMotion generation and synchronization are centralized at the PC. Motion execution is decentralized at the drives. Laser Photonics software operates on any standard desktop or industrial PC. Servo loops are closed on the drive.The Titan FLS 48 utilizes the software for coupling the vision module with the motion system that coordinates the laser and all interaction between the software and the machine control hardware.

Advanced Control Software Benefits• Higher quality output (accuracy and precision) due to fully digital drive and advanced servo

algorithms• Simplified integration as all major automation components are bundled into one platform• Lower startup and lifecycle cost due to lower component count and reduced engineering

time• Faster startup and changeover results from fully integrated motion platform, easy to use

setup tools and extensive diagnostics• Laser Photonics uses standard CAM for writing G-code however, any software will work• Higher throughput due to high performance control, network and high-power drives• User interface flexibility due to local or remote processing• Higher reliability due to fewer components

CNC Unit State of the art PC based CNC motion controlCNC Control Method Closed loop method Programming Native G-code programming Control Functions X-, Y, Y’, and Z-axis simultaneously controlled with

laser power and velocity Input Methods Ethernet, CD, USB flash memory, 3.5” diskPosition Laser Output Integrated hi-speed Position Laser Output (PLO) for laser

firing or position latching applications Motion Capabilities Point-to-point; linear, circular, helical and spherical interpolation;

velocity profiling; electronic gearing; on-the-fly trajectory modification; high-speed I/O; camming

Coordinated Motions RS-274 standard G-code motion including linear, circular, helical and spherical interpolation, cutter compensation, normalcy, parts rotation, mirroring, path retrace, polar transformations and cylindrical transformations, scaling

Additional Features Digital current loops for improved motion and stabilityVision System Supports extra vision system for positioning and beam

registration Program Storage Capacity Unlimited within PC memory capabilities

Operating Modes Edit / Automatic / Manual Display Functions Laser power, laser conditions, position information, cutting

conditions, messages, diagnosis, settings Controller/Drive Interface Firewire Display 15” TFT LCD

CNC Controller

-12-

Shuttle Tables Automatic: Motorized single pallet

Dual: Automatic dual pallet (stacked or inline) for loading and unloading during cutting operation Vacuum Table: for sheet metal loading

Sheet Metal Loading System Loader/unloader/palletizer with vacuum suction

Automatic Focus Automatic focus: capacitor or ultrasonic sensor versions available

Exhaust Suctioning equipment with centrifugal blower

Remote CNC Pendant Remote joystick operation for manual X-Y-Z axis adjustments

Remote Terminal Remote control tower with touch screen monitor

Diode Pointer Red beam for visual alignment

Standard Control Terminal Terminal with touch screen monitor

Auxiliary Touch Screen Interface Extra interface for graphical CNC controls

Laser Chiller Model dependent upon laser output power

Training One day of training is included at the Laser Photonics facility. Additional training available at standard rate as per Terms & Conditions of Sale.

Commissioning On site commissioning and setup

Lens Options Single or duplex lenses: 2.5”, 3.75”, 5” or 7” available

Fiber Cable 100uM, 10M, (400uM, 10M for welding)

Fiber Coupler Enclosed fiber coupler/ optical switch

Fiber Laser Upgrade Laser upgrade is available in 1000 watt increments up to 5000 watts. Laser must be sent to Laser Photonics for upgrade.

Warranty Standard: One year parts and labor Extended: 10% per year of coverage of total price

Delivery Standard delivery time is 12 - 14 weeks. All prices are FOB factory bases. Handling and transportation costs are quoted separately.

Options

-13-

Titan FLS 48 Features & Specifications

Main Features

• Same quality cutting in every spot of the cutting table• Direct drive ultra smooth motion with non-contact linear motors – virtually no wear• Standard G-code operation with standard postprocessor AutoCAD fi les loader• High pressure cutting head with programmable choice of assist gas• Autofocus for any material or capacitor sensor for metals• Ethernet ready and plug- &-play capable• Pass through for integration into a production line• Modular design for instant replacement of any functional part helping to minimize down time• Down draft exhaust for environmentally safe operation• Automatic software assist gas selection• Cutting area equipped with a nesting table• Slotted mild steel strip table

Cutting Head Beam Delivery System

• Water cooled focusing optics• 70mm, 100mm, 120mm lenses.• High pressure assists gas connection up to 250 psi.• Lens protection cover window

• Same quality cutting in every spot of a cutting table• 10, 20, 50 meters and more fi ber beam delivery cable allows cost eff ective fabrication of laser cutting systems with unlimited size of the cutting table• Easily replaceable fi ber cable in emergency situations with integrated � ber coupler• Modular design for instant replacement of any functional part helping to minimize down time• No optical components to clean and replace

-14-

Titan FLS 48 Laser Safety System

Class I Enclosure

21 CFR 1040 CDRH compliant fully enclosed system with protective viewing windows

Safety Considerations During Operation1064 nm wavelength laser light emitted from this laser system is invisible and may be harmful to the human eye. Proper laser safety eyewear must be worn during operation.

21 CFR 1040.10 ComplianceThis product is a Class 1 laser as designated by the CDRH and MEETS the full requirements for a stand-alone laser system as de-fined by 21 CFR 1040.10 under the Radiation Control for Health and Safety Act of 1968. As an added level of security, a redundantly switched safety interlock system helps prevent accidental exposure to excess laser radiation. Plus, the system is equipped with an electrical power manual reset, a key-locked laser power switch and a remote interlock connector. Finally, the system has audible and visible emission indicators with five (5) second emission delay settings. All these features, in combination, constitute the laser radiation safety system, which allows the equipment to be used in a safe and secure manner.

CLASS I LASER PRODUCT

INVISIBLE LASER RADIATION

AVOID EXPOSUREINVISIBLE LASER RADIATION

IS EMITTED FROM THIS APERTURE

-15-

Titan FLS 48 Options

Shuttle Tables

Automatic: Motorized single palletDual: Automatic dual pallet for loading and unloading during cutting operation

Automatic Focus Height Sensing Unit

Capacitor or ultrasonic sensors are available depending on material requirements

Remote CNC Pendant

Remote joystick operation for minor axial adjustments

Diode Pointer

Red aiming beam for visual alignment

Remote Terminal

Remote control tower with touch screen monitors

-16-

Titan FLS 48 Options

Standard Control Terminal

Terminal with touch screen monitor

Auxillary Touch Screen Interface

Extra interface for other functions such as graphical CNC controls

Laser Chiller

Model dependent upon laser output power

Lens Options

Single or duplex lens: 2.5”, 3.75”, 5” or 7” available

Complete Remote Terminal with Fiber Laser & Machine Controls

Machine control station with all necessary touch screens, monitors and computer hardware mounted on � ber laser unit

-17-

Titan FLS 48 Options

Fiber Coupler

Enclosed � ber coupler / optical switch

Fiber Laser Upgrade

Laser upgrade is available in 1000 watt increments up to 5000 watts. Laser must be sent to Laser Photonics for upgrade

Cutting Head

Three axis cutting head

Multi-axis Cutting Head

FIve axis cutting head for specialized applications

Fiber Cable

100 uM, 10M length (Cutting & General Applications)400 uM, 10M length (Welding)

-18-

Motion Control & Software

Motion generation and synchronization are centralized at the PC. Motion execution is decentralized at the drives. It operates on any standard desktop or industrial PC. Servo loops are closed on the drive.

The software is good for coupling the vision module with the motion system that coordinates the laser.

Motion Controller

• Higher throughput due to high performance control, network, and high-power drives• Higher quality output (accuracy and precision) due to fully digital drive and advanced servo algorithms• Faster startup and changeover results from fully integrated motion platform, easy to use setup tools, and extensive diagnostics• Lower startup and lifecycle cost due to lower component count and reduced engineering time• Higher reliability due to fewer components• Simplifi ed integration as all major automation components are bundled into one platform• User interface fl exibility due to local or remote processing of cutting process• Laser Photonics uses BobCAD/CAM for writing G-code however, any software will work

Advanced Software

Training, Delivery & Commissioning

One day of training is included at the Laser Photonics facility. Additional training is available at standard rate as per Terms & Conditions of Sale. Standard delivery time is 12 - 14 weeks. All prices are FOB factory bases. Handling and transportation costs are quoted separately.

Warranty

Standard: One year parts and laborExtended: 10% per year of coverage of total price

-19-

Advanced Support

• Internationally compliant for delivery & worldwide support• Remote diagnostics and upgrades• Multilingual software• Built-in help index• 50,000 hours MTBF on high power laser• Remote training• Remote System Restore• Remote laser diagnostics through TCP/IP protocol

LaserNet

• TCP/IP laser control protocol• LaserNet interface provides fi ber laser module operational control, diagnostics, and support• Remote laser diagnostics through TCP/IP LaserNet protocol

International Support

Multilingual software with worldwide support• Australia• China/Hong Kong• Mexico• India• Taiwan• Singapore

• Malaysia• Thailand• Turkey• Philippines• Qatar• Russia and more

-20-

Application Research CenterLaser Photonics maintains an applications lab for processing customer samples and assisting with process development. Our applications lab has the latest testing equipment to analyze all of your application needs.

For marking applications, we provide the highest quality analysis of each and every mark using our Mark Quality Assessment™ (MQA™) software. With our MQA™ software, we have the ability to guarantee and verify the accuracy and quality of our marks.

The screen shot below demonstrates how the MQA™ software reads the level of pixels in the material marked. The section in red has been analyzed with the MQA™ software. The high and low pixel values demonstrate the overall contrast of the mark.

This procedure can be applied to various marking processes and types generated by our Fiber Laser marking systems. We will prepare and research all applications within a matter of two to three weeks and provide a detailed report free of charge.

-21-

IMPORTANT NOTICE: ALL SPECIFICATIONS, TECHNICAL DATA AND OTHER INFORMATION CONTAINED IN THIS DOCUMENT, AND ALL STATEMENTS ABOUT THE PRODUCT(S) IDENTIFIED IN THIS DOCUMENT, ARE PRELIMINARY IN NATURE AND ARE PROVIDED “AS IS,” WITHOUT WAR-RANTY OR ASSURANCE OF ANY KIND. LASER PHOTONICS MAKES NO REPRESENTATION OR WARRANTY, EXPRESSED OR IMPLIED, REGARDING THE PRODUCT(S) OR THEIR SPECIFICATIONS. ALL INFORMATION IS SUBJECT TO CHANGE. PLEASE CONTACT LASER PHOTONICS FOR MORE INFORMATION. LASER PHOTONICS AND THE LASER PHOTONICS LOGO ARE TRADEMARKS OF LASER PHOTONICS CORPORATION. OTHER TRADEMARKS ARE THE PROPERTY OF THEIR RE-SPECTIVE OWNERS. COPYRIGHT LASER PHOTONICS CORPORATION. ALL RIGHTS RESERVED.

Safety Considerations During Operation1064 nm wavelength laser light emitted from this laser system is invisible and may be harmful to the human eye. Proper laser safety eyewear must be worn during operation.

21 CFR 1040.10 ComplianceThis product is a Class 1 laser as designated by the CDRH and MEETS the full requirements for a stand-alone laser system as defined by 21 CFR 1040.10 under the Radiation Control for Health and Safety Act of 1968. As an added level of security, a redundantly switched safety in-terlock system helps prevent accidental exposure to excess laser radiation. Plus, the system is equipped with an electrical power manual reset, a key-locked laser power switch and a remote interlock connector. Finally, the system has audible and visible emission indicators with five (5) second emission delay settings. All these features, in combination, constitute the laser radia-tion safety system, which allows the equipment to be used in a safe and secure manner.

CLASS I LASER PRODUCT

INVISIBLE LASER RADIATIONAVOID EXPOSURE

INVISIBLE LASER RADIATIONIS EMITTED FROM THIS APERTURE

-22-

Laser Photonics, LLC is the industry leader in developing high-tech Fiber and CO2 laser systems. Laser Photo-nics exclusively specializes in advanced, innovative, latest generation laser systems, processes and technolo-gies. We focus on cutting edge Fiber Laser technology for material processing. We have delivered hundreds of Fiber Laser cutting and engraving machines to countries worldwide. Contact us to learn more about our marking, cutting and engraving systems.

400 Rinehart Road • Lake Mary, FL 32746 USAwww.laserphotonics.com • info@laserphotonics.com

Tel: 1.888.418.2613 • Fax: 407.804.1002

A DIVISION OF FONON TECHNOLOGY INTERNATIONAL

Laser Photonics - Product Range

OEM Marking Kits Handheld FiberTowerTM SeriesCutting Systems

Titan FLS 48