Tianjin Coorig Technology Co.,Ltd.img.tradekey.com/images/uploadedimages/brochures/0/... ·...

TianjinTianjinTianjinTianjin CoorigCoorigCoorigCoorig TechnologyTechnologyTechnologyTechnology Co.,Ltd.Co.,Ltd.Co.,Ltd.Co.,Ltd.Add: Jinghai developing zone, Tianjin city of ChinaTel:+0086-18602625561 Fax:+0086-022-68676319Website：www.coorig.com E-mail: [email protected]

Miss Sally zhao, E-mail: [email protected]: 0086-18602625561

AAAA setsetsetset ofofofof necessarynecessarynecessarynecessary machinesmachinesmachinesmachines totototo produceproduceproduceproduce squaresquaresquaresquare ductductductduct asasasas followingsfollowingsfollowingsfollowings inininin detail:detail:detail:detail:

1.1.1.1. AutoAutoAutoAutoDuctDuctDuctDuct LineLineLineLine 3333

This machine is a high-effectiveness equipment which is suitable for TDF flange, angle steel flange and TDC flange.The sheets with TDC flange can be folded into square duct on this machine automatically. On the other hand, Chinese andEnglish can be converted easily. It is the first choice for the ductwork clients.

MainMainMainMain components:components:components:components:

A:A:A:A: A material frame ( two coils: the max loading per each is 6 tons);A transmission frameA main machine( uncoiling-leveling and grooving-V-notch and End-notch-Folding)A CNC system

B:B:B:B: material frame is driven by convertor motor and the diameter of the frame can be adjusted by handMain machine adopts Mitsubishi servo motor15-inch industrial screen is touched by hand, easy to operate.Button, breaker and contactor of MOELLER from GermanyCNC system is provided by Beijing aerospace system which is very famous in china, andThe performance is very stable.

MainMainMainMain technicaltechnicaltechnicaltechnical data:data:data:data:

Model: ADL-3-1250Thickness of the sheet(mm): 0.5-1.2 Max-width of the sheet(mm): 1000, 1250Max feeding speed(m/min): 15 Coil max-weight(kg): 6000Dimension(MM):Main machine(LXWXH): 2200X1800X1300Material frame(LXWXH): 2500X1800X1500Power(kw): 10 Weight(kg): 4500Length tolerance: ±0.5mm diagonal tolerance: ±0.8mm



AppearanceAppearanceAppearanceAppearance ofofofof thethethethemachine:machine:machine:machine:

WorkWorkWorkWork flow:flow:flow:flow:

Note:

For TDF flange, only one person can operate this machine, but for TDC flange, two persons are ok.



2.2.2.2. PittsburghPittsburghPittsburghPittsburghLockLockLockLock FormingFormingFormingFormingMachine:Machine:Machine:Machine:

This machine is mainly used to complete lock forming. Here, we refer you two types of the pittsburgh lock formingmachines considering the quantity you process. One is LF-12DR, another one is LF-12. All of our lock forming machineadopts pressure bearings which can not only avoid wear of the side but also prolong the life of the machine.


LF-12DR LF-12

Main technical data:Model: LF-12DRPower(kw): 1.5Thickness of the sheet(mm): 0.5-1.2

Functions:Weight(kg): 230Dimension(LXWXH)(MM): 1050X580X880

Note: Two persons can operate one pittsburgh lock forming machine at a time.

Main technical data:Model: LF-12Power(kw): 1.5Thickness of the sheet(mm): 0.5-1.2

Functions:

Weight(kg): 215Dimension(LXWXH)(MM): 1050X580X880



3.3.3.3. TDFTDFTDFTDF flangeflangeflangeflange formingformingformingformingmachine:machine:machine:machine:

This kind of machine is used to produce TDF flange. Both flange and G-clamp can be finished in this machine. It can cut thesheets automatically for manufacturing the G-clamp. All the rollers adopt Gcr15 material which can ensure the stable shapingand performance. The working speed of it is 14m/min. so it is usually used for a large scale production.


4.4.4.4. MouldMouldMouldMould forforforfor TDFTDFTDFTDF cornercornercornercorner

Appearance of the mould:

Main technical data:Model: TDF-12Thickness of the sheet(mm): 0.6-1.2Power(kw): 3Dimension(LXWXH)(MM): 2500X640X1200Weight(kg): 1000Shape:

A size: 34±0.5mmTwo persons can operate it at one time.

Name of the machine: Mould for TDF cornerModel: TDF-12DCFunction: it is used to punch the TDF corners which is inaccordance with the TDF flange forming machine.Note: As factory, you should have one 40 tons punchingmachines to equip with this mould to punch TDF corners.



5.5.5.5. PneumaticPneumaticPneumaticPneumatic FoldingFoldingFoldingFoldingMachineMachineMachineMachine

This machine compresses and folds the sheets pneumatically. With the features of the auto-mode and high effectiveness, it isthe best choice for the duct folding.

Appearance of the machine:

6. SSSSeameameameam closingclosingclosingclosingmachine,machine,machine,machine, we do not produce this kind of machine, so here I do not give you our detailed introduction for you.sorry.

7.7.7.7. PneumaticPneumaticPneumaticPneumatic cornercornercornercorner machinemachinemachinemachine

It is mainly used to install TDF corners for the square ducts automatically. The operator only spends 6 seconds to finishthe installation of one corner. It only help users save time, but also reduce labor force and intensity.

Name of the machine: Pneumatic folding machineModel: AF-1.5X2050TDFAir pressure(Mpa): 0.6Weight(kg): 850Dimension(LXWXH)(MM): 2820X1000X1400Note:Note:Note:Note: This machine is driven by air pump. And only oneperson can operate it smoothly.Considering the width of the sheet, such as 5 feet sheets,so this time, we refer you this kind of machine (AF-1.5X2050TDF)




8. TDC flange forming machine

TDC flange forming machine is used for duct with big cross-sections. It is also characterized by good sealing and easyinstallation. This machine consists of a material feeding frame, a cold forming machine and a shearer. Working speed ofthis machine is 6m/min.

As manufacturer of this kind of machine, we refer you the model of TDCT-30TDCT-30TDCT-30TDCT-30

Appearance is as followings:

Name of the machine: Pneumatic corner machineModel: PC-12Thickness of the sheet(mm): 1.2Air pressure(mpa): 0.6-0.8Weight(kg): 500Dimensions(LXWXH)(MM): 1400X800X400Note: this machine is also driven by air pump. And if youprocess a small duct, only one person is ok, if the diameterof the duct is a big, two persons are needed.

Model: TDCT-30Power(kw): 3Thickness of the sheet(mm): 1.0Weight(kg): 2500Dimension(LXWXH)(MM): 3650X700X1500

Shape:



9.9.9.9. MMMMouldouldouldould forforforfor thethethetheTDCTDCTDCTDC cornercornercornercornerYes, we can also provide you this kind of mould, but now I do not have the photo of it, usually in china, most clients useMOULD OF TDF corner.

10.10.10.10. CNCCNCCNCCNC plasmaplasmaplasmaplasma cuttingcuttingcuttingcuttingmachinemachinemachinemachine

It is one of our main machines in our factory. This machine is mainly used to cut the various sheets the user need. You justneed to input the dimension of the sheet you want to process and then the machine can cut the sheet you required. It is easyto learn and operate for our operators, especially for that new users. We refer you the model of PCM-1250X3100PCM-1250X3100PCM-1250X3100PCM-1250X3100, and thedetailed introduction of it as followings:

SSSStandardtandardtandardtandard configurationsconfigurationsconfigurationsconfigurations wewewewe referreferreferrefer youyouyouyou ofofofof thethethethemachine:machine:machine:machine:

A Cutting table 1PCSA CNC control system 1PCSA original MAP software 1SETA original Cutmaster A40 of Thermal dynamics 1PCS

MainMainMainMain technicaltechnicaltechnicaltechnical data:data:data:data:Thickness of the sheet: galvanized steel: 0.5-6mm

Stainless steel: 0.5-3mmworking range: 1250X3100mmcutting precision: ±0.5mmmax cutting speed: 7 meter per minuteMotor: 380v, 3phase, 50hz.Main power: 12kwair pressure: 6.2 paweight(kg): 1200Dimensions(LXWXH)(mm): 3800X1500X1200Appearance: painting color: blue+ white + yellow

Note: we can also choose powerful plasma generator in accordance with the different thickness of the sheets.



MainMainMainMain importedimportedimportedimported parts:parts:parts:parts:1. Round guide and slide of SBC from korea.2. DigitalAC servo motor of Mitsubishi3. Cutmaster A40 of Thermal dynamics4. Original map software of British5. Button, breaker and contactor of Moeller from Germany6. Sensor switches of Bedook from Germany7. Guide of Igus from Germany

Appearance of the machine:

A cutting table and cnc system



Plasma generator of THERMAL DYNAMICS original Map software of British

Tianjin Coorig Technology Co.,Ltd.img.tradekey.com/images/uploadedimages/brochures/0/... ·...

Documents

Transcript of Tianjin Coorig Technology Co.,Ltd.img.tradekey.com/images/uploadedimages/brochures/0/... ·...