THOMSON

GATEWAY

CHANGING THE FACTORY

SETTING OF THE WPA-PSK

ENCRYPTION KEY

TYPE

192.168.10.254

INTO THE ADDRESS BAR

SELECT WIRELESS

SELECT CONFIGURE

SELECT

Use WPA-PSK Encryption

1)TYPE THE CODE INTO

THE FIELD

WPA-PSK * Encryption Key

2) SELECT APPLY*At least 8 characters. The letters are Case Sensitive, (meaning they are low key or capital key) as determined on the modem’s page, that is exactly how they shouldbe inserted when asked for, in order to be able to connect

RIGHT CLICK ON THE TWO

COMPUTER SCREENS ICON

SELECT

NETWORK AND SHARING CENTER

SELECT

MANAGE WIRELESS NETWORKS

SELECT THE THE NAME OF THE WIRELESS

NETWORK THAT YOU WANT TO REMOVE

THEN CLICK ON REMOVE

RIGHT CLICK ON THE TWO

COMPUTER SCREENS ICON

SELECT

CONNECT TO A NETWORK

SELECT THE NAME OF THE WIRELESS

NETWORK THAT YOU WANT TO CONNECT TO

THEN CLICK ON CONNECT

TYPE THE CODE INTO THE FIELD

SECURITY KEY OR PASSPHRASE

THEN CLICK ON CONNECT

IF YOU WOULD LIKE TO SEE

THE CHARACTERS TYPED

INTO THE FIELD CLICK ON

DISPLAY CHARACTERS