This & that - minke.de Essential goods.pdfFor light ladies’ shoes, spring 40 mm Art.No. 3481.05...
Transcript of This & that - minke.de Essential goods.pdfFor light ladies’ shoes, spring 40 mm Art.No. 3481.05...
Essential goods
With the extensive range of equipments no wishremains unfulfilled. This way you can ordereverything you need for your workplace to yourconvenience. From padding materials to shoe careproducts, cleaners, adhesives, and work clothes.Every other equipment you need to supply yourcustomers – but also your workshop – that isavailable can be found on the following pages.
This & that
J 2
Essential goods
Bottom building
LUKLEIN –In the original profile and vulcanizing moulds
schweissresistent
LUKLEIN is especially useful for made-to-measure shoes andhigh class repairing.The utmost quality and a highly non-slipability makeLUKLEIN indispensable.
Technical Form Plate
Thicknesses 3.5/4.3/5.0 mm Art.No. 0003.00
Thickness 2.7 mm Art.No. 0003.01
Swing buffo crops
Thicknesses 1.5–2/2–2.5/2.5–3 mm Art.No. 0130.00Urkraft insole leather
Thickness 1.6 mm Art.No. 0117.15
Thickness 2.0 mm Art.No. 0117.20
Thickness 2.5 mm Art.No. 0117.25
Thickness 3.0 mm Art.No. 0117.30
NUCCA shoulders
Thicknesses 2.5–3/3–3.5 mm Art.No. 0030.00TERPA crops
Color stone Thickness 4.5 mm Art.No. 4236.45
Color Swedish-brown Thickness 4.5 mm Art.No. 4235.45
Color Swedish-brown Thickness 6.0 mm Art.No. 4235.60
Form plate(s) Plate sizes 65 x 100 cm
Colors stone, Swedish-brown, beige, bordeaux, green, blue
Art.No. 4370.01
Soles with colored Intarsia
J 3
Essential goods
Bottom building
Outsoles, heel building, sole rolls, corrections,prosthesis
COCKEY
Out of a mixture ofnatural rubber anda specific polymer.
Note: the thickness constitutes the two final numbersof the Art. No. of COCKEY.Example: thickness 4 mm has the final numbers .04
● light weighted and flexible● excellent anti-slip reliability● very hard wearing● a guaranteed safe walking● no brittleness in cold● good reset capability and a good damping of the walk
Colors light grey, beige, white, turquoise, lilac, blue, black
Plate size with thicknesses 4, 6, 8 mm 120 x 75 cm
Plate size with thickness 20 mm 60 x 75 cm
Art.No. 4040. ..
COCKEY Prince – step pleasant!
J 4
Essential goods
Installation parts and adjuvant The TUCA Quicksock is just perfect for taking prints ofthe foot! The worked-in seat and the soft consistencyof the fabric-resin combination guarantee a perfect fitto the patients’ foot so that the knit goods are not settingout during the long way along the seat and might becomeunstable during the filling-in process.
Because of the long leg extension of about 40 cm(measured from the seat) ever foot – even withparalysis—can be easily taken prints of and it offersmuch “substance” to be filled in or foamed in.
TUCA impression technology—for a faster, extremelyclean and precise impression of the foot and the foot-stump. Because of its easy handling TUCA QUICK-SOCKScan be used in your workshop as well as on the way, forexample, in hospitals and homes.
TUCA impression technology:Sparkling clean and lightning alternative to classicplastering! For every application the appropriate sock:
TUCA QUICK-SOCKSWith worked-in seat and a long leg base – the perfectimpression help for the foot.
Small Art.No. 3401.01
Medium Art.No. 3401.02
Large Art.No. 3401.03
Extra-large Art.No. 3401.04
TUCA QUICK-SOCKS, leg base ca. 40 cm
Small Ø 5.1 cm Art.No. 3400.61
Medium Ø 6.7 cm Art.No. 3400.62
Large Ø 7.8 cm Art.No. 3400.63
Extra-large Ø 8.6 cm Art.No. 3400.90
TUCA QUICK-SOCKS OT, length 42 cm
Large Ø 7.6 cm Art.No. 3400.80
Extra-large Ø 8.9 cm Art.No. 3400.95
TUCA QUICK-SOCKS OT, length 76 cm
Small Art.No. 3401.61
Medium Art.No. 3401.62
Large Art.No. 3401.63
Extra-large Art.No. 3401.64
TUCA SOCKLETS, leg base ca.16 cm
Release agent 1 kg Art.No. 3140.01
Release agent 5 kg Art.No. 3140.05
Release agent TUCA 1402
For TUCA release agent 1402 Art.No. 3140.50Thinning agent
TUCA SOCKLETS:Just as TUCA QUICK-SOCKS only with a short leg base –for easier providing.
TUCA QUICK-SOCKS OT:The wound round hose-sock primarily used to take printsof socks.
J 5
Essential goods
Toe allowancefor the TUCA impression technology
Piece Art.No. 3401.80Fixing sock
Art.No. 3401.90
SetConsisting of all 4 sizes, 2 fixing socks, 1 bottle Incidin
Art.No. 3401.91Size 1, for children’s feet
The laborious casting or fitting to of the toe allowanceto a ready-foamed last is now over! With the TUCA toeallowance you have the possibility to provide the footwith it beforehand. The negative-shape created fromtaking the print includes the toe allowance which needsto be in the last later.
The toe allowance out of silicone adapts the contour ofthe foot perfectly and does not wear sensitive feet out.(Easy to be sterilized after usage!)
The TUCA toe allowance is put into the fixing sock, . ..
The TUCA toe allowance is now the tip of the later foamedlast. Because it is open to the top it can be used forparticular hammer big toes, for instance.
The toe allowance is available in pairs in 4 different shapes:
. . .put onto the toes, and fixed to the foot with the help ofthe fixing sock.
Art.No. 3401.92Size 2, for lady’s feet
Art.No. 3401.93Size 3, for normal men’s feet
Art.No. 3401.94Size 4, for broad men’s feet
J 6
Essential goods
Note: the thickness constitutes the two final numbersof the Art. No. of Belco.Example: Thickness 4 mm has the final numbers .04
Note: the thickness constitutes the two final numbersof the Art. No. of CD-Cell.Example: Thickness 2 mm has the final numbers .20
1 pair length 22 or 24 cm Art.No. 3608.00
1 piece length 22 or 24 cm Art.No. 3608.01
Amputation springs
1 piece 17 or 19 cm Art.No. 3602.00Peronäus paralysis-springs
For especially strong men’s shoes Art.No. 3481.01
525
ORTHOFORMA, galvanized
For strong men’s shoes Art.No. 3481.02
425
For normal men’s and strong ladies shoes Art.No. 3481.03
325
For ladies’ shoes, spring 40 mm Art.No. 3481.04
245
For light ladies’ shoes, spring 40 mm Art.No. 3481.05
145
Fork joint for ladies,spring 25 mm, short = 11 mm Art.No. 3481.20
1025
Fork joint for ladies, spring 45 mm, long = 12 mm Art.No. 3481.21
1045
Rigid foam for shortening-balancing Art.No. 3190. ..Plate ca. 0.35 m2
Thicknesses 1/2/3,5/5,5/7 cm
CD-Cell (DIVINYCELL)
Thicknesses 2/3/4/5/6/8/10/12/15 mm Art.No. 3310. ..Belco flexible cork
Installation parts and adjuvant
J 7
Essential goods
Stalit thermoset, 1 kg Art.No. 3100.00
Stalit thermoset, 5 kg Art.No. 3100.05
Stalit hardener, 100 g/tube Art.No. 3101.10
Stalit thinner, 1 kg Art.No. 3102.00
Stalit thermoset
Ecutan S (A) last foam 1 kg and 5 kg Art.No. 3135. ..
Ecutan 1000 (B) 1 kg and 5 kg Art.No. 3138. ..
Ecutan
Glass silk 1 m Art.No. 3105.00
Roll Breadth13.5 cm Art.No. 3108.35
Roll Breadth15.0 cm Art.No. 3108.50
Roll Breadth18.0 cm Art.No. 3108.80
Roll Breadth 10.0 cm Art.No. 3108.00
Glass silk tape
Orthoforma last wax 1.0 kg/tin Art.No. 1282.01
Liquid side linings 0.5 kg/tin Art.No. 3204.01
Liquid side linings 5.0 kg/tin Art.No. 3204.05
Monoperl welt stitching yarn Roll Art.No. 5600.00
Lip tape TE 100 m/roll Art.No. 4910.00
Installation parts and adjuvant
5 kg aluminum bag Art.No. 3420.05
20 kg box Art.No. 3420.20
DUROFLOX extra hard plaster
Skintex 4000 Art.No. 5900.40
Skintex adhesive Art.No. 5901.00
Skintex (nylon-flock)
2 m long 10 pieces/box Art.No. 3402. .. Breadth 6/8/10/12/15/20 cm
Cellona (plaster bandages)
Roll Art.No. 1060.00
Roller Piece Art.No. 8859.50
PUNTO spot adhesive
Minke foot imprint charge blankswith measuring strip, usable as simple ordouble foot imprint charge blank Art.No. 3460.00
Canister with 30 l and bottling tap Art.No. 3202.30
Conical bottle with 750 ml Art.No. 3202.01
Conical bottle (empty) Art.No. 8861.00
Spraying head Art.No. 8862.00
Canister with 5 l Art.No. 3202.05
Leather softener SR
Colors brought into line with theMinke color display “a colorful selection”
Note: the thickness constitutes the two final numbersof the Art. No. of Cellona.Example: Thickness 8 mm has the final numbers .08
J 8
Essential goods
Upper and lining materials Textiles and lining materialsThere are orthopedic cases whichrequire special upper and liningmaterials.ISKA-FLOR is an ideal adjuvantas an upper material with adiversity of advantages.
● kind to the skin● washable (polyester fiber!)● fast colored● a good padding effect
It perfectly fits as a house shoe, hospital shoe and forproviding diabetes.It is two-colored and can be used on both sides, so it is:3 kinds, 6 colors! With an interlaid Moltropen (foamplastics)-pad.
Art.
No. 5
701.
00
Art.
No. 5
701.
10
Art.
No. 5
701.
20
Art.
No. 5
701.
30
Binding tapes
Color red/brown Art.No. 5070.00
Color blue/grey Art.No. 5070.10
Color black/beige Art.No. 5070.20
Plate size 1.5 m2
Art. 148 (ladies), piece goods Art.No. 5205.01
Art. 168 (men), piece goods Art.No. 5205.02
VILEDON FIX, adhesive hot reinforce material
Different designs Art.No. 5015.00Textile linings
Piece goods Art.No. 5210.02VILEDON, reinforcing cloth
Lining, piece goods Art.No. 5000.01Drill
Pure wool, piece goods Art.No. 5212.00ISKA lamb-pile, strong
Pure wool, piece goods Art.No. 5212.10ISKA lamb-pile, light
Color: hemp, 0.5 mm, piece goods Art.No. 5201.01
ORTHOFLOR, elastic coveringnon-woven fabric
Colors: taupe, grey, naturalSkin size: ca. 7 sq. ft. Art.No. 0350.00
LAMBSLOCK, authentic lambskin
ISKA-FLORpollution tested according to the examination criteriacatalogue of the SG
pollution tested according to the examination criteriacatalogue of the SG
J 9
Essential goods
Padding materials
Note: the thickness constitutes the two final numbersof the Art. No. of SILVEX, LAYA and GALAXON.Example: thickness 6 mm has the final numbers .06
Thicknesses 2/3/4/5/6/8/10 mm Art.No. 3021. ..
Size 9 (pair) 5er pack Art.No. 3630.09
Size 8 (pair) 5er pack Art.No. 3630.08
Size 7 (pair) 5er pack Art.No. 3630.07
Size 6 (pair) 5er pack Art.No. 3630.06
Insole pads – tropical shape – Very high, solid (moos rubber)
With linen Art.No. 3030. ..
Without linen Art.No. 3035. ..
Perforated with linen,available only in 4 mm Art.No. 3036. ..Thicknesses 4/6/10 mm
Plate size ca. 1 m2 Art.No. 3000. ..Thicknesses 2/3/4/5/6/9/12/18/25 mm
GALAXON thermoplastic padding material
Thickness ca. 1.0 cm Art.No. 3680.02
Thickness ca. 1.5 cm Art.No. 3680.03
Thickness ca. 2.0 cm Art.No. 3680.04
Upper padding 1 m a piece
Size 1 M (pair) 5er pack Art.No. 3635.01
Size 2 M (pair) 5er pack Art.No. 3635.02
Size 3 M (pair) 5er pack Art.No. 3635.03
Size 4 M (pair) 5er pack Art.No. 3635.04
Insole pads – stomach shape –High, solid (moos rubber)
Size 10 (pair) 5er pack Art.No. 3639.10
Size 11 (pair) 5er pack Art.No. 3639.11
Size 12 (pair) 5er pack Art.No. 3639.12
Insole pads – T shape –High, solid (moos rubber)
Size 1 length 13.0 cm (pair) 5er pack Art.No. 3643.01
Size 2 length 12.0 cm (pair) 5er pack Art.No. 3643.02
Size 3 length 10.5 cm (pair) 5er pack Art.No. 3643.03
Size 4 length 9.0 cm (pair) 5er pack Art.No. 3643.04
Arch supports –Longitudinal arch, solid (moos rubber)
Size 3 (pair) 5er pack Art.No. 3631.03
Size 2 (pair) 5er pack Art.No. 3631.02
Size 1 (pair) 5er pack Art.No. 3631.01
Insole pads – tropical shape –Semi-high, medium solid (foam rubber)
Size 3 (pair) 5er pack Art.No. 3632.03
Size 4 (pair) 5er pack Art.No. 3632.04
Size 5 (pair) 5er pack Art.No. 3632.05
Insole pads – heart shape –Very high, solid (moos rubber)
SILVEX moos rubber, grindable
LAYA latex, padding material
pollution tested according to the examination criteriacatalogue of the SG
pollution tested according to the examination criteriacatalogue of the SG
J 10
Essential goods
Safety shoes
Sizes 5/6/7/8/9/10/11
Art.No. 7310.01 Sizes 7/8/9/10/12
Combination sizes 13/14
Art.No. 7310.02
Steel caps
Steel cap for shortenings XH Art.No. 7310.04Height 5.9 cm, breadth 9.6 cm
Steel capsFor the supply of safety shoes for people with extreme hammerbig toes and leg shortenings
Steel cap for shortenings XB Art.No. 7310.06Height 5.7 cm, breadth 9.9 cm
Sizes 23/25/26/27/28/29
In pairs Art.No. 7313.00
Flexible steel soles, flat
Sizes 23/25/26/27/28/29
In pairs Art.No. 7314.00
Flexible steel soles, shaped
Piece goods Art.No. 3651.00 Profile tape for steel caps
1 m per piece Art.No. 4322.00Shoe cylinder, anti-static
1 size, in pairs Art.No. 7311.00Instep protection
Thickness 6.5 mm Sizes 39–48
Art.No. 4317.00
BOA soles, shape Foil- and gas resistant, anti-static
Thickness 7.5 mm Sizes 39–48
Art.No. 4317.10
BOA soles, shape Goil- and gas resistant, anti-static
Size I 285 mm
Size II 310 mm
Art.No. 4318.00
BOA long soles with loose heeloil- and gas resistant, anti-static
Size I
Size II
Art.No. 4318.10
BOA heels for BOA long soles with loose heeloil- and gas resistant, anti-static
Plate(s) Thickness 5 mm
Art.No. 4230.00BOA-ALBA plate(s) Thickness 6 mm
white Art.No. 4270.06
BOA sole platesoil- and gas resistant, anti-static
Art.No. 4222.00Plate size 100 x 60 cm
STRONG sole platesFor safety and sporting shoes,oil- and gas resistant, anti-static
5.9
cm
9.6 cm
5.7
cm
9.9 cm
J 11
Essential goods
PRYX® with anti-static equipmenthas a very low penetrationresistance capacity. This way,beddings along the whole lengthof the sole are no problem.
RO-RA 35 anti-static
PRYX® anti-static SWITCH
black thickness 16 mm Art.No. 4208.06
black thickness 10 mm Art.No. 4208.10Plate size 50 x 80 cm
PRYX® anti-static
black thickness 16 mm Art.No. 4209.06
black thickness 10 mm Art.No. 4209.10Plate size 150 x 80 cm
750 g tin Art.No. 1137.00 Conductive strip, piece goods Art.No. 4322.10
SWITCH, anti-static 2.6 mm Art.No. 4275.00Plate size 1.5 m2
And the adhesion of PRYX®anti-static? – No problem!
Round plating strip,electrical conductive
The special anti-static adhesive RO-RA 35 has a goodadhesive power with an extremely low volume resistancecapacity and a high gas and acid proof. The testing institutePFI certifies these qualities! With a volume resistancecapacity of 3.0 x 103 RO-RA 35 is far below the demandsof the adhesion of anti-static shoes (105–109 accordingto DIN EN 344-1, 4.3.4). The strength of the adhesion(DIN EN 1392) is not influenced by gas and acid position.
PRYX® with anti-static equipment and the same positiveprocessing qualities as classic PRYX®. Individual beddingscan be designed according to the medical demands and notas the outer facts set it: beddings – along the whole lengthof the sole – are no problem regarding the conductivity.
SWITCH is an anti-static plate material developed especiallyfor insoles in safety shoes: 50% lighter than a leather insoleSWITCH has high moisture and sweat absorption but also ahigh moisture emission.
The electrical conductive round plating strip is an alternativeto the so called shoe cylinder which assures a conductiveconnection between foot and outsole but which is oftendamaged by aggressive materials. The conducting strip issewed into the upper as seen in the illustration.
A N T I S T A T I S C H
®
A N T I S T A T I S C H
A N T I S T A T I S C H
pollution tested according to the examination criteriacatalogue of the SG
J 12
Essential goods
Working hygiene
200 ml per tin Art.No. 3811.00Cellona skin cream
Piece Art.No. 3820.00Skin protecting soap
1 l bottle Art.No. 3835.00
HAKU hand cleanserFor heavily soiled hands
Thermal insulation gloves, normal 1 pair Art.No. 3850.00
Protective gloves “120°”, thick, 1 pair Art.No. 3851.10Protective gloves “Contrahit”, extra thick 1 pair Art.No. 3851.00
Examination gloves Glovex, small 100 pieces Art.No. 3803.00Examination gloves Glovex, medium 100 pieces Art.No. 3803.01Examination gloves Glovex, large 100 pieces Art.No. 3803.02
50 ml tube Art.No. 3702.00
800 ml dispenser Art.No. 3702.10
STOKO glycerin caring cream
Piece Art.No. 3710.00Wall dispenser STOKO Mat dispenser
Dispenser bottle 500 ml Art.No. 3821.00
5 l canister Art.No. 3821.01
SPITACID hand disinfection
1 wall dispenser and 4 dispenser bottles Art.No. 3821.02
SPITACID-Set
Atomizer 250 ml Art.No. 9200.00
5 l canister Art.No. 3823.01
Autoderm extraAgainst fungus and bacteria
1 l bottle Art.No. 3822.00
Spraying head Art.No. 8862.00
5 l canister Art.No. 3822.01
INCIDIN area disinfectionLasts, tools, cabins, work clothes
Dispenser bottle 500 ml Art.No. 3825.10
1 l bottle Art.No. 3825.01
6 l canister Art.No. 3825.02
MANIPUR – antimicrobial washing lotion For sensitive and demanding skin.Hygienic washing and bathing.
1 wall dispenser and 4 dispenser bottles Art.No. 3825.03MANIPUR Set
Dispenser bottle 500 ml Art.No. 3812.10
1 wall dispenser and 4 dispenser bottles Art.No. 3812.01
Wall dispenser for holding dispenser bottlesSPITACID, MANIPUR and SILONDA Art.No. 3828.00
SILONDA – caring skin lotion
250 ml tube Art.No. 3701.00
SLIG SPECIALHand cleanser for special soiling as oil colors, lacquers, resin, adhesives, etc.
150 ml tube Art.No. 3870.15
250 ml tin Art.No. 3870.25
Rich skin cream SOFTUniversal protecting and caring cream –non-greasing, perfume-free
J 13
Essential goods
Upper leather care
Art.No. 1285.60
FATOLAN sales display
Colors natural, gabardine, light brown, middle brown, reddish brown, grey, blue, green, dark brown, black
Selection (10 tins) in wooden box Art.No. 1285.50
75 ml per tin Art.No. 1285.00
750 ml per tin Art.No. 1285.10
FATOLAN
FATOLAN I II III IV VColor number natural gabardine light middle reddish
brown brown brown
600, 601 603 605 606 607
602, 615 604 616 614 612
620, 621 617
630
FATOLAN for all grain leathersColor numbers confer to the Minke color display“a colorful selection”
FATOLAN VI VII VIII IX XColor number grey blue green dark black
brown
610 613 611 609 625
631 618 661
632 619
Colors black, dark brown, middle brown, blue, colorless
Art.No. 9304.11
Baranne, first class leather care, 100 ml
The water-based FATOLAN contains selected waxes andoils which treats the leather well and protects it lastinglyfrom moisture and dirt.FATOLAN makes leather pliable and fully touchy – itunderlines the special character of every leather.
J 14
Essential goods
1 l bottle Art.No. 1241.00
5 l canister Art.No. 1241.01
FATO spraying polish, black and natural
Plastic Color (Edge ink and waist paint for leather andrubber bottoms)Colors: black, dark brown, middle brown,light brown, mahogany, beige, tobacco,havanna, red, blue, green
500 ccm Art.No. 1200.00
FATO leather chemicals
Finishing Color(Edge ink, leather- and waist paint)Colors: black, dark brown, middle brown,mahogany, tobacco, havanna
500 ccm Art.No. 1209.00
Transparent bating (Wood-like transparent cuts and bottoms)mahogany, teak, jacaranda, natural
500 ccm Art.No. 1210.00
Suede finishing(Lighting production of suede bottoms)Colors: graphite, gold-brown, natural
500 ccm Art.No. 1207.00
LO essence(Fast drying luster finish)Colors: milky
500 ccm Art.No. 1212.00
Special finishing(Grinded and polished, producestransparent bottom)Colors: graphite, gold-brown, natural
500 ccm Art.No. 1208.00
Sole bating (Colored or transparent suede bottoms)Colors: gold-yellow, red, blue, green
500 ccm Art.No. 1213.00
Crepe and rubber bating (Dyes natural crepe and transparentrubber into another color)Colors: black, brown
500 ccm Art.No. 1215.00
High polishing ink (Repairing-finish for cuts and waists)Colors: black, dark brown, middle brown,light brown, havanna, leather colored,beige, colorless, red, green, blue
500 ccm Art.No. 1201.00
Cold polishing ink(High polish, easy to spread)Colors: black, dark brown, middle brown,mahogany
500 ccm Art.No. 1218.00
Silk polishing ink (Repairing-finish for cuts and waists)Colors: black, dark brown, middle brown,light brown, havanna, leather colored,beige, colorless, red, green, blue
500 ccm Art.No. 1203.00
J 15
Essential goods
FATO leather chemicals
Universal polish (High polish applicable by hand)Color: natural
1 l Art.No. 1242.00
Cleaning filler(Disposes contamination of leather)Color: milky
1 l Art.No. 1246.00
Wax finish(Upper leather balm)Color: natural
500 ccm Art.No. 1243.00
Pore filler WS(Legalizes open celled, out-lasted upperleather spots)Colors: natural, black
500 ccm Art.No. 1247.00
Leather colors(To color up and change the color of plainand grained leather; applicable withspraying pistol or brush)Colors: in all colors of the Minke colordisplay “a colorful selection”
32 bottles in woodenbox selection accordingto Minke color display Art.No. 1248.00
Size 1 l tins Art.No. 1248.01
Size 250 ccm (suction pot) Art.No. 1248.02
Spraying pistol “Optima 401” Art.No. 8130.00
Nozzle set for “Optima 401”0.5 oder 0.8 mm Art.No. 8131.01
Spraying polish(High polish with spraying pistol)Colors: natural, black
1 l Art.No. 1241.00
5 l Art.No. 1241.01
Shadow finish(To embellish uppers and colored bottoms;to spray on with air-brush-pistol, nozzle0.3 mm)Colors: black, dark brown, light brown
500 ccm Art.No. 1249.00
Air brush pistol * Art.No. 8135.00
Air brush compressor Art.No. 8135.10
Air brush suction pot Art.No. 8135.11
*for illustration see chapter “tools” page E 23
Combination edge ink (Combination with edge wax)Color: black
500 ccm Art.No. 1206.00
Cutting solution WS (Perfect leather cuts through roughleather structure in combination withhigh polishing ink)Color: natural
500 ccm Art.No. 1216.00
Smoother (Smooth, closed transitions, leather halfsoles up to waist)Color: transparent
1 l Art.No. 1219.00
FATO doctor(Repairing paste for upper leather damages)Color: transparent (mixable with upper leather colors)
100 g Art.No. 1250.01
J 16
Essential goods
FATO leather chemicals
Seam sealing(Liquid; paint with fine brush)Color: colorless
500 ccm Art.No. 1256.00
Grinding wax(For elegant grinding effect)Colors: black, dark brown, havanna,natural
ca. 400 g Art.No. 1270.00
Last’s wax(For de-lasting without any problems)Color: natural
1 kg Art.No. 1282.01
Natural sponge(For applications with hands, as pore fillers, for example)
Piece Art.No. 8858.00
Polishing wax (brilliant high polish)Colors: black, natural
ca. 280 g Art.No. 1271.00
Three-edge waxColors: black, dark brown, natural
ca. 100 g Art.No. 1272.00
Bee’s waxColor: natural
ca. 90 g Art.No. 1275.00
Lacquer mending paste (Repairs of lacquered leather)Colors: black, colorless
100 g Art.No. 1255.00
Cleaner BT (Upper leather cleaner, for example, forgreasy and oily substances, adhesives,wax remainders)Color: colorless
1 l Art.No. 1307.00
Adhesive 142(First class adhesive with a wide range of application)Color: milky
1 kg Art.No. 1100.01
5 kg Art.No. 1100.02
Leather strainer “Flex” solvent(Ensures a flexible leather before processing)Color: milky
5 l Art.No. 1281.02
10 l Art.No. 1281.03
Thinner for high- and silk polishing ink
1 l Art.No. 1316.00
Thinner for leather colors
1 l Art.No. 1306.00
Saving container TS-Boy(Container with brush for adhesives, colors, etc.)Colors: red, green, blue
0.9 l Art.No. 8860.02
1.5 l Art.No. 8860.03
Cutting wax(For hand and machine; for a high processing temperature)Colors: black, dark brown, middle brown, light brown, havanna,natural
Piece, ca. 250 g Art.No. 1273.01
per kg Art.No. 1273.00
Edge ink(To ink open upper edges)Colors: black, dark brown, middle brown,mahogany, beige, tobacco, havanna
500 ccm Art.No. 1258.00
Repairing pens(For disposing upper leather damages)Colors: in all colors of the Minke color display “a colorful selection”
1 piece Art.No. 1251.00
12 pieces, standardcolors selection Art.No. 1251.01
26 pieces, selectionin wooden box Art.No. 1251.02
J 17
Essential goods
Motive patterns(A masterpiece for extraordinary bottoms)Motives A–G
per piece Art.No. 1295.00
Note:If you have particular wishes concerning the colors of ourproducts, please feel free to ask. Our Minke color display“a colorful selection” offers suggestions.
All FATO products with a green label contain no solvent.
All FATO products with a yellow label contain solvents.
KST-portioning-cup with top (airtight)(For optimal application of the Fato-products)
Art.No. 3116.00
FATO leather chemicals
Motive A Motive B Motive C Motive D
Motive E Motive F Motive G
These patterns can be ordered. (Illustrations are smaller.)
J 18
Essential goods
CoatsAprons
Size 1 = 80 x 100 cm, Size 2 = 80 x 110 cm
Size 3 = 80 x 120 cm
white Art.No. 5850.00
Rubber aprons
Size ca. 90 x 110 cm
white Size 1 Art.No. 5800.00
white Size 2 Art.No. 5801.00
white Size 3 Art.No. 5801.10
sand Size 1 Art.No. 5800.01
sand Size 2 Art.No. 5801.01
sand Size 3 Art.No. 5801.35
green Size 1 Art.No. 5800.02
green Size 2 Art.No. 5801.02
green Size 3 Art.No. 5801.45
Flap aprons
white Size 1 Art.No. 5800.06
white Size 2 Art.No. 5801.04
white Size 3 Art.No. 5801.05
sand Size 1 Art.No. 5800.04
sand Size 2 Art.No. 5801.14
sand Size 3 Art.No. 5801.15
green Size 1 Art.No. 5800.05
green Size 2 Art.No. 5801.24
green Size 3 Art.No. 5801.25
Crossing tape aprons
Size 44–58● 2 side pockets● 1 breast pocket● stand-up collar● 1/1 length = 112 cm● hidden button-facing● removable buttons● back strap● 100% cotton
white Art.No. 5812.00
Men’s working coat
Size 46–58● lapel collar● hidden button-facing● removable buttons● 2 side and 1 breast pocket● 1 inner breast pocket● 3/4 length = 96 cm
Cotton, white Art.No. 5810.00
Cotton, sand Art.No. 5810.01
Coat with lapel collar
Size 46–58● lapel collar● hidden push-button-facing● 1 breast pocket● 2 side pockets● 1 inner pocket● 3/4 length = 96 cm
Diolen, white Art.No. 5811.10
Diolen, sand Art.No. 5811.11
Coat with lapel collar
J 19
Essential goods
TrousersAll trousers are cotton, special sizes to order.
Dungarees – cotton
sand Art.No. 5830.51
Size 46–58● adjustable waistband● strap with KTS-pluggable buckle● double flap pocket● hidden zipper● pulled up back● 2 side loops● lockable bottom pocket
Trousers – cotton
sand Art.No. 5830.01
Size 46–56● circular waistband with elastic● 2 side loops● 1 bottom pocket, lockable● belt loops for belts up to 5 cm
Trousers with pleaded front – cotton
white Art.No. 5830.10
Size 46–58● 2 side pockets● 1 lockable bottom welt pocket
Trousers – cotton
white Art.No. 5830.00
Size 46–56● circular waistband with elastic● 2 side pockets● 1 bottom pocket, lockable● belt loops for belts up to 5 cm