This product should only be fitted by a qualified plumber Should the installation be completed by a non-qualified person then the guarantee may be considered invalid.

For a claim made under our warranty, written certification of your installers' credentials maybe required. For further information or to find a qualified installer in your area please visit the Chartered Institute of Plumbing and Heating Engineering website - www.ciphe.org.uk

Insert a washer into the cone end of the hose and screw to the shower handset.Insert the second washer into the other cone end of the hose and attach it to the mixer outlet.Once the final position of the shower handset holder is determined, mark the position of the holes on the wall with the holes on the fixing base (this is called 'fixed bracket' in the diagram – please change to 'fixing base' in the diagram) as reference, then drill the holes and insert the rawl plugs provided.Secure the fixing base to the wall with the two screws supplied.Finally push the bracket for the hand shower over the fixing base and secure by tightening the grub screw under the holder using a suitable allen key.

297

21

0