Thermal power plant pollution control
-
Upload
mithun-mohan -
Category
Education
-
view
5.205 -
download
5
description
Transcript of Thermal power plant pollution control
THERMAL POWER PLANT POLLUTION CONTROL
BY MITHUN MOHANROLL NO :45
TYPES OF POLLUTION CONTROL METHODS ADOPTED IN THERMAL POWER PLANTS
Power Plant Pollution Control
What is beingRemoved byThe electrostaticPrecipitator?
By the wet Scrubber?
pollution control devices
Thermal pollution and proposed control measures:· Regenerative feed heating cycle will be used in the process.· Land management1. Clearing of the existing vegetation will be kept to a minimum and only tothe required extent.2. Railway siding, water intake facility and water disposal facility will be sorouted that, apart from techno-economic feasibility and other aspects, it willrequire minimum destruction of vegetation. The roadside plantation willsave the existing ecological scenario.3. Active help from the locals will be solicited in preserving the greenbelt.They will be educated and discouraged destroying the vegetation for fuelpurposes etc.· Green-belt development program will be implemented
· All the equipment in the power plant will be designed to have a total noise levelnot exceeding 85-90 dB (A) as per the requirement of OSHA (OccupationalSafety and Health Administration) standard.· Turbines will be housed in closed buildings, which will reduce the noise levelsfrom the turbine generators.
· Earplugs will be provided to the workers, and it should be enforced to be used by workers
Thank you