THEO Statement of Line Lounge Seating and Tables

Page TO.1 Kimball Seating Solutions Price List

➤See page

Statement of Line TO.2

Planning TO.3

Pricing TO.4

Surface Materials TO.9

Wood Finishes TO.9

Upholstery TO.11

Price List Effective Dates: Pricing 10.01.21 Revision 12.15.21

THEO™ SEATING & TABLES Table of Contents


THEO™ SEATING & TABLES Statement of Line

High-Back Lounge Chair without Arms ➤See page TO.4 to specify.

High-Back Lounge Chair with Arms ➤See page TO.4 to specify.

Mid-Back Lounge Chair without Arms ➤See page TO.5 to specify.

Mid-Back Lounge Chair with Arms ➤See page TO.5 to specify.

Guest Chair ➤See page TO.6 to specify.

Ottoman ➤See page TO.6 to specify.

End Table Bases ➤See page TO.8 to specify.

Chat Table Bases ➤See page TO.8 to specify.

Square and Soft-Square Table Tops ➤See page TO.7 to specify.

Round Table Tops ➤See page TO.7 to specify.

➤See individual pricing pages for dimensions.

Statement of Line ➤See page TO.2

Planning page TO.3

Pricing page TO.4

Surface Materials page TO.9


Tables

Table bases are standard in casters or polished aluminum glides that match Theo lounge seating. Tops available in three shapes and 7 worksurface material/rim combinations. Thickness of the top varies based on the material selected; consequently, the overall height of the table will vary. 20"H end table bases without a surface are 187⁄8"H; 26"H chat table bases without a surface are 247⁄8"H. Surface Rim Surface Material Material Thickness

TFL Vinyl 11⁄8"

TFL Ply 3⁄4"*

HPL Vinyl 11⁄8"

HPL Ply 3⁄4"*

Wood Veneer 11⁄8"

Plywood Self edge 3⁄4"*

Solid surface Radius 11⁄4" *3⁄4"-thick table top are not avail-able in 36"D x 36"W.

THEO™ SEATING & TABLES Planning Overview


Planning page TO.3

Pricing page TO.4


Back and seat shells are available in all Kimball standard wood finishes.

Polished control and gas-lift allow height and tilt adjustment.

Low-profile, four-star, polished base is standard with nylon glides with polished covers. Soft ball casters with polished covers are optional; upcharge applies.

Back and seat foam is 25⁄8"-thick and highly resilient with 32 ILD and density of 2.5.

Side foam is 17⁄8"-thick and highly resilient with 32 ILD and density of 2.5.

Table tops are offered in a variety of materials including: • TFL • HPL • Plywood veneer • Solid surface

Tops and bases are specified separately to create 20"H end (shown) and 26"H chat-height tables.


Tips

Models that meet TB133 requirements are available in select upholstery. ➤Contact By Design. IMPORTANT: Orders cannot be cancelled for chairs specified with Alliance Program upholstery.

How to Specify ! Model

Back upholstery: 2 Upholstery grade 3 Upholstery number

Seat upholstery: 4 Upholstery grade 5 Upholstery number

Arm upholstery (omit for armless models):

6 Upholstery grade 7 Upholstery number

Wood finish: 8 Finish price group STD = Group 1 9 Finish designator

bl Base finish: 497 = Polished Aluminum bm Casters/glide option: C61 = Nylon glides C65 = Soft casters (+$ 56 )

THEO™ SEATING & TABLES Pricing High-Back Lounge Chairs


Planning page TO.3

Pricing page TO.4


High-Back Lounge without Arms

High-Back Lounge with Arms

In-Line Upholstery Pricing Shipping GSA Model Description 1 or COM 2 3 or COL 4 5 6 7 L7 L8 lbs. Cubic Feet SIN

K34HLBXA Without arms $ 3216 3321 3383 3454 3554 3653 3751 4171 4407 50.00 20.00 Pending

K34HLBA With arms $ 3306 3431 3504 3588 3707 3824 3940 4438 4718 50.00 20.00 Pending

Alliance Program Upholstery Pricing Model A B C D E F G H I J K L M N O P Q R

K34HLBXA $ 3370 3446 3505 3564 3626 3702 3746 3827 3894 3964 4077 4304 4448 4477 4504 4539 4574 4731

K34HLBA $ 3489 3579 3649 3719 3792 3882 3934 4030 4110 4193 4327 4596 4766 4801 4833 4874 4916 5102

Dimensions (Inches) COM (Yards) COL Overall Seat Arm 1–4” 5–11" 12–18" Sq. Description H W D H W D H (from floor) (from seat) Non-Dir. Repeat Repeat Repeat Feet

Without arms 41–453⁄4 30 30 181⁄4–231⁄2 19 18 — — Entire Unit 2.4 3.4 4.8 6.8 86.0

Back 1.6 2.3 3.3 4.7 70.0

Seat 1.1 1.6 2.3 3.3 55.0

With arms 41–453⁄4 30 30 18–223⁄4 19 18 24–283⁄4 6 Entire Unit 2.9 4.0 5.6 7.9 101.0

Back 1.6 2.3 3.3 4.7 70.0

Seat 1.1 1.6 2.3 3.3 55.0

Arms 0.5 0.7 1.0 1.4 15.0


Tips



Back upholstery: 2 Upholstery grade 3 Upholstery number


Arm upholstery (omit for armless models):



bl Base finish: 497 = Polished Aluminum bm Casters/glide option: C61 = Nylon glides C65 = Soft casters (+$ 56 )

THEO™ SEATING & TABLES Pricing Mid-Back Lounge Chairs


Planning page TO.3

Pricing page TO.4


Armless Mid-Back Lounge

Mid-Back Lounge with Arms


K34MLBXA Armless $ 2976 3074 3131 3196 3289 3381 3471 3861 4078 45.00 18.00 Pending

K34MLBA With arms $ 3065 3183 3251 3329 3441 3551 3659 4127 4388 45.00 18.00 Pending


K34MLBXA $ 3119 3189 3244 3299 3356 3426 3466 3541 3603 3669 3774 3983 4116 4144 4169 4201 4233 4378

K34MLBA $ 3237 3321 3387 3453 3521 3605 3653 3743 3818 3897 4023 4274 4433 4467 4497 4535 4574 4748

Dimensions (Inches) COM (Yards) COL Overall Seat Arm 1–4” 5–11" 12–18" Sq. Description H W D H W D H (from floor) (from seat) Non-Dir. Repeat Repeat Repeat Feet

Armless 36–403⁄4 30 27 18–223⁄4 19 18 — — Entire Unit 2.1 3.0 4.2 5.9 73.0

Back 1.4 2.0 2.8 4.0 70.0

Seat 1.1 1.6 2.3 3.3 55.0

With arms 36–403⁄4 30 27 18–223⁄4 19 18 24–283⁄4 6 Entire Unit 2.6 3.6 5.1 7.2 88.0

Back 1.4 2.0 2.8 4.0 70.0

Seat 1.1 1.6 2.3 3.3 55.0

Arms 0.5 0.7 1.0 1.4 15.0


Tips



Back upholstery (omit for ottoman):




bl Base finish: 497 = Polished Aluminum bm Casters/glide option: C61 = Nylon glides C65 = Soft casters (+$ 56 ; not

available on ottoman)


Planning page TO.3

Pricing page TO.4


Guest Chair

Ottoman


K34G Guest chair $ 2612 2702 2754 2815 2900 2984 3068 3426 3626 35.00 16.00 Pending

K34O Ottoman $ 1481 1524 1549 1578 1619 1659 1699 1870 1966 25.00 14.00 Pending


K34G $ 2743 2808 2858 2909 2961 3026 3063 3132 3189 3249 3346 3539 3661 3686 3709 3739 3769 3902

K34O $ 1544 1575 1599 1623 1648 1679 1697 1730 1757 1786 1832 1924 1983 1995 2006 2020 2034 2098

Dimensions (Inches) COM (Yards) COL Overall Seat 1–4” 5–11" 12–18" Sq. Description H W D H W D Non-Dir. Repeat Repeat Repeat Feet

Guest chair 34–383⁄4 30 25 18–223⁄4 19 18 Entire Unit 1.8 2.6 3.7 5.2 65.0

Back 1.2 1.7 2.4 3.4 60.0

Seat 1.1 1.6 2.3 3.3 55.0

Ottoman 18 24 183⁄4 18–223⁄4 17 18 Entire Unit 1.0 1.4 2.0 2.8 28.0

THEO™ SEATING & TABLES Pricing Guest Chair & Ottoman


THEO™ SEATING & TABLES Pricing Table Tops

How to Specify TFL ! Model @ Top and rim material: LL = TFL with vinyl edgeband LLD = TFL with ply rim 3 Rim profile:

P = Softened vinyl edgeband (LL) E = Flat ply rim (LLD) 4 Surface finish designator 5 Edgeband finish designator

(include for P rim only) HPL or Wood ! Model @ Top material and rim material: L = HPL with vinyl edgeband LD = HPL with ply rim W = Wood with wood rim D = Plywood with self edge 3 Rim profile (omit for plywood): P = Softened vinyl edgeband (L) E = Flat ply rim (LD) F = Softened wood rim (W) 4 Surface finish price group (omit for

plywood): STD = Group 1

5 Surface finish designator 6 Vinyl finish designator

(include for P rim only) Solid Surface ! Model @ Top and rim material: SS = Solid surface 3 Rim profile: A = Radius rim 4 Surface finish designator: 405 = Designer White


Planning page TO.3

Pricing page TO.4


Model Dimensions (Inches) Top Material/Rim Shipping GSA TFL with TFL with HPL with HPL with Wood with Plywood Solid Vinyl Rim Ply Rim Vinyl Rim Ply Rim Wood Rim Self Edge Surface D W (LL) (LLD) (L) (LD) (W) (D) (SS) lbs. Cubic Feet SIN

SQUARE

K3424SQ 24 24 $ 250 280 339 371 878 908 819 24.69 1.30 Pending

K3430SQ 30 30 $ 339 371 429 460 967 998 908 36.83 1.90 Pending

K3436SQ 36 36 $ 429 — 519 — 1057 — 998 51.39 2.60 Pending

SOFT-SQUARE

K3424SSQ 24 24 $ 311 339 401 429 937 967 878 24.69 1.30 Pending

K3430SSQ 30 30 $ 401 429 490 519 1027 1057 967 36.83 1.90 Pending

K3436SSQ 36 36 $ 490 — 579 — 1116 — 1057 51.39 2.60 Pending

ROUND

K3424RD 24 24 $ 269 299 $359 387 897 926 836 20.47 1.30 Pending

K3430RD 30 30 $ 359 387 448 477 985 1015 926 30.21 1.90 Pending

K3436RD 36 36 $ 448 — 539 — 1074 — 1015 42.83 2.50 Pending

Square Tops

Soft-Square Tops

Square Tops

Related Products: Table Bases ➤See page TO.8.

IMPORTANT: • 24" tops are for use on end table bases only.

• 30" tops can be used on either end or chat table bases.

• 36" tops are for use on chat table bases only.

• 36" tops are not available in TFL with ply rim, HPL with ply rim, or plywood self edge.


Standard Includes

• Base: polished aluminum • Nylon glides or soft casters

Tips

IMPORTANT: 24" tops are for use on end table bases only. 30" tops can be used on either end or chat table bases. 36" tops are for use on chat table bases only.



Planning page TO.3

Pricing page TO.4


THEO™ SEATING & TABLES Pricing Table Bases

Model Description Dimensions (Inches) Price Shipping GSA H lbs. Cubic Feet SIN

END

K34BG20497 With glides 187⁄8 $ 595 14.00 5.00 Pending

K34BM20497 With casters 187⁄8 $ 655 14.00 5.00 Pending

CHAT

K34BG26497 With glides 247⁄8" $ 643 17.00 8.30 Pending

K34BM26497 With casters 247⁄8" $ 702 17.00 8.30 Pending

End Table Base with Glides

End Table Base with Casters

Chat Table Base with Glides

Chat Table Base with Casters

➤See the Kimball Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: • Characteristics of wood • Special wood finishes • Customer-specified laminate (CSL)

• Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM) process overview

• Alliance program • TB133 process IMPORTANT: Wood finishes applied to solid hardwood are complementary to the same wood finish applied to wood veneer, but not an exact match. ➤Contact Customer Service for more information.


THEO™ SEATING & TABLES Surface Materials Wood Finishes


Planning page TO.3

Pricing page TO.4


Price Group 1 AD Almond MC Amber IM Brighton CO Canyon CC Cordoba ES Espresso DF Driftwood TM Huntington MW Midtown MH Mocha YO Monterey PB Portobello 792 Sable SC Sedona TW Tribeca NW Tuscan UW Urban CR Clear1

1 Available on plywood tops only.

Applies to: • Theo seating • Theo tables


• Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM) overview

• Alliance program • TB133 process IMPORTANT: Woodgrain laminate is a commercially compatible match to the wood finish of the same name and designator with consideration for the most com-mon application—laminate surfaces on a wood chassis. When laminate and wood are mixed in other appli-cations, the flip that occurs natural-ly in veneer may influence the overall match from piece to piece.

Applies to: • HPL and TFL table tops • Table top vinyl edgeband

Woodgrain Group 1 (STD) AD Almond MC Amber IM Brighton CO Canyon CC Cordoba DF Driftwood TM Huntington MW Midtown MH Mocha YO Monterey PB Portobello 792 Sable SC Sedona TW Tribeca NW Tuscan UW Urban

Solid Color Group 1 (STD) 480 Antique White 403 Chamois 462 Cinder 440 Cloud 485 Dark Chocolate1 405 Designer White 450 Fog 488 Frosty White 461 Graphite 420 Sandstone 425 Shadow 460 Storm 419 Wallaby 1 Available in vinyl only.

Pattern Group 1 (STD)

823 Carbon Evolv 818 Crisp Linen 841 Desert Zephyr 821 Elemental Concrete 819 Flax Gauze 862 Grey Glace 843 Misted Zephyr 807 Silcon Evolv 822 Smoke Quarstone 805 Titanium Evolv 802 White Nebula 814 White Tigris



Planning page TO.3

Pricing page TO.4


THEO™ SEATING & TABLES Surface Materials Laminate and Vinyl


• Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM) process overview

• Alliance program • TB133 process

Applies to: • Theo chairs and ottoman

Kimball Seating Fabric Price Grades 1–7 ➤See the Surface Materials Reference Guide at www.kimball.com for the most up-to-date list of available seating fabric patterns.

Kimball Leather Price Grades L7 and L8 ➤See the Surface Materials Reference Guide at www.kimball.com for the most up-to-date list of available seating leather.

Alliance Fabric Price Grades A–R ➤See Surface Materials at www.kimball.com for a wide variety of graded-in fabrics from Arc-Com, Carnegie, CF Stinson, Maharam, Mayer Fabrics, Momentum, and Ultrafabrics.

COM/COL Kimball has analyzed each model to most accurately reflect the COM/COL yardage requirements shown on the pricing pages. The yardage requirement for each model is based on 54"W fabric and cutting the fabric up the roll.

For widths other than 54", increase the yardage requirement by the factors below:

Fabric width Increase yardage

50"–53" 15%

48"–49" 30%

45"–47" 45%

If repeat is larger than 18”, contact Customer Service to confirm the correct amount of yardage required. When ordering 10 or more chairs in the same COM, yardage require-ments may be reduced. ➤Contact Customer Service.


THEO™ SEATING & TABLES Surface Materials Upholstery


Planning page TO.3

Pricing page TO.4



THEO™ SEATING & TABLES Notes Statement of Line ➤See page TO.2

Planning page TO.3

Pricing page TO.4


THEO Statement of Line Lounge Seating and Tables

Documents

Transcript of THEO Statement of Line Lounge Seating and Tables