THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS...

8
THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with the RE0F10D CVT (figure 1), you’ll notice they’re using a much heavier push belt compared to the earlier model RE0F10A CVT (figure 2). The late model RE0F10E/ H/J CVTs now use a chain instead of a push belt. Everything still works the same; they just use a heavier chain to handle the torque from larger engines with more horsepower. When you remove the pulleys with the rear cover — which is standard procedure on most CVTs — you’ll notice the RE0F10E chain assembly looks very familiar (figure 3). It also has two plastic chain guides, which are similar to the ones in the Subaru Lineartronic CVTs. The best part of removing a chain from the pulleys instead of a push belt is there’s no need for nylon tie wraps (or zip ties). These nylon tie wraps prevent the push belt — made of hundreds of plates held together with steel bands — from coming apart (figure 4). The construction of the chain eliminates this requirement, making it easier to work on. If you’ve ever had a push belt fall apart on the bench because you didn’t wrap it with at least two nylon ties, you’ll understand. A closer look reveals two chain guide pins, similar to the Lineartronic, but now it has lubricating holes designed to spray oil onto the chain. The open end of these tubes fit onto two steel tubes inside the case (figure 5). Figure 2 Figure 1

Transcript of THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS...

Page 1: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

THE WORD ON THE STREET

by Mike Souzamembers.atra.com

4 GEARS October/November 2016

While working on later model Nissan vehicles equipped with the RE0F10D CVT

(figure 1), you’ll notice they’re using a much heavier push belt compared to the earlier model RE0F10A CVT (figure 2). The late model RE0F10E/H/J CVTs now use a chain instead of a push belt. Everything still works the same; they just use a heavier chain to handle the torque from larger engines with more horsepower.

When you remove the pulleys with the rear cover — which is standard procedure on most CVTs — you’ll notice the RE0F10E chain assembly looks very familiar (figure 3). It also has two plastic chain guides, which are similar to the ones in the Subaru Lineartronic CVTs.

The best part of removing a chain from the pulleys instead of a push belt is there’s no need for nylon tie wraps (or zip ties). These nylon tie wraps prevent the push belt — made of hundreds of plates held together with steel bands — from coming apart (figure 4).

The construction of the chain eliminates this requirement, making it easier to work on. If you’ve ever had a push belt fall apart on the bench because you didn’t wrap it with at least two nylon ties, you’ll understand.

A closer look reveals two chain guide pins, similar to the Lineartronic, but now it has lubricating holes designed to spray oil onto the chain. The open end of these tubes fit onto two steel tubes inside the case (figure 5). Figure 2

Figure 1

1mikesouza1016.indd 4 10/12/16 8:37 AM

Page 2: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

GEARS October/November 2016 5

There are two flat notches on the tubes that align with two notches on the steel tubes. These notches preventing the tubes from rotating (figure 6), which keeps the lube holes aligned to spray oil onto the chain.

Figure 6

Figure 3 Figure 4

Figure 5

1mikesouza1016.indd 5 10/12/16 8:37 AM

Page 3: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

Figure 8

Figure 7

Something New Just Got Easier

6 GEARS October/November 2016

The procedure for removing the chain from the pulleys is the same as for removing a belt. You can remove the chain with the pulleys out of the rear cover or leaving them in and using the cover as a support. If you’re leaving the pulleys in with the transmission on the bench, you’ll have to prop the case up because of the height difference.

You can use a two-jaw gear puller to compress the spring on the secondary pulley. Similar two-jaw pullers are available on the internet for around $200-300, such as this TJ-1 Posi-Lock #11054 (11054 is the jaw length; figure 7).

A three-jaw puller is available for a few dollars more, but the third jaw won’t fit in tight areas on some CVTs. The two-jaw puller works well on almost all CVTs, except the Subaru Lineartronic Gen II. That CVT requires a special tool because of the secondary pulley design. (For more, check out the ATRA Lineartronic Gen I and II comparison webinar or the article in GEARS June 2016 issue).

To use the gear puller, set the edge of the two jaws on the edge of the upper secondary pulley to compress the spring. The jaw’s edge won’t damage the pulley sheath. Now you can easily remove the chain from the primary pulley. Use the same procedure to reinstall the chain.

Once the chain or belt is back onto the pulleys, you’ll need to add a couple nylon ties around the entire chain or belt before removing the puller. They’ll keep the upper pulley from moving too far down, leaving some slack in the chain/belt for aligning the pulleys during installation (figure 8).

The jaw’s edge won’t

damage the pulley sheath.

Now you can easily

remove the chain from

the primary pulley.

1mikesouza1016.indd 6 10/12/16 8:37 AM

Page 4: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

Automatic Transmission Repair KitsToledo Trans-Kit®, (TTK) manufactured and engineered by Seal Aftermarket Products, offers simplified diagrams and technical information sheets to enhance the functionality of each kit.

TTK kits are recognized among the highest quality and most comprehensive kits available to transmission professionals. Premium Automatic Transmission Repair Kits “Designed by rebuilders, for rebuilders”.

TTK FEATURES & BENEFITS:• Engineered utilizing best-in-class materials • Meets or exceeds OEM specifications• Offers more critical components, O.E. components, premium

seals and gaskets, design enhancements, patented components, plus all the little extras you won’t find elsewhere.

TTK Master, Super and Banner Box Kits

TTK Overhaul Kits

TTK MAXX High Performance/HD Kits

Introducing TTK Maxx®— whether you have a high performance street racer, diesel performance, heavy duty or RV, TTK Maxx has the kit for you. Below are a few examples of the types of advantages you find in many of our TTK Maxx (High Performance/HD) overhaul kits: TTK MAXX FEATURES & BENEFITS:• Check ball changed from metal to plastic to reduce wear• Rings upgraded to optimize performance (based on application)

PTFE, Metal, Viton®• Upgraded rubber compounds to improve sealing properties• Additional components like; cup plug(s) and poppet valve(s)

NEW!

Often copied... never duplicated!

Seal Aftermarket Products2315 SW 32 AvenuePembroke Park, FL 33023 U.S.A.Toll Free (800) 582-2760Telephone (954) 364-2400email: [email protected]

2013 SFMA & MAF Manufacturer of the Year recipient.

IMPORTANT NOTICE: Seal Aftermarket Products (SAP) reserves the right to make changes to, or discontinue any product or service identified in this publication without notice. All shipments are FCA Pembroke Park, FL. Price and availability subject to change. Possession of price list does not constitute an offer to sell. ©2016 Seal Aftermarket Products. All rights reserved.

Who’s Designing Your Kits?

SAP_Kitss.indd 1 7/25/2016 12:03:52 PMADS-OctNov2016.indd 7 10/12/16 8:06 AM

Page 5: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

Figure 10

Figure 11

Figure 12

Something New Just Got Easier

8 GEARS October/November 2016

Normally, the next step for reas-sembly would be to install the pulleys and chain back into the rear cover. Once installed with the retainer bolts through the cover, you’d cut the nylon ties off. That would keep the chain or belt stretched tight.

Not so on this unit: On this chain assembly, there’s nothing holding the two aluminum tubes in place; they just sit on the plastic guides (figure 10). There are two extended tabs on the rear cover to hold the tubes in place (figure 11), so the pulley and chain assembly has to go into the case first; not into the rear cover. Then you can set the two aluminum tubes onto the plastic chain guides, one at a time, before installing the cover (figure 12).

There are two extended tabs on the rear cover

to hold the tubes in place.

1mikesouza1016.indd 8 10/12/16 8:37 AM

Page 6: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

ADS-OctNov2016.indd 9 10/12/16 8:06 AM

Page 7: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

Figure 13

Figure 14

Something New Just Got Easier

10 GEARS October/November 2016

Make sure you have the two flat areas of the tubes facing inward, so the tubes are aligned correctly (figure 13). Now you can install the cover onto the pulleys, using a couple bolts with the heads removed for alignment pins (figure 14).

That’s it; you’re done! And you’ll find this same procedure much easier on all Nissan CVTs… even those with a push belt. Every day should be a new learning experience; otherwise it just wouldn’t be worth getting out of bed.

We’ll be covering this information on Nissan CVTs and much more at the ATRA Powertrain Expo on October 27 – 30th in Las Vegas at the Paris Hotel. See you there!

1mikesouza1016.indd 10 10/12/16 8:37 AM

Page 8: THE WORD ON THE STREET - Microsoft...THE WORD ON THE STREET by Mike Souza members.atra.com 4 GEARS October/November 2016 W hile working on later model Nissan vehicles equipped with

14 Todd Court Extension, Yaphank, NY 11980 (631) 567-2000 • Fax (631) 567-2640 Toll Free: 800-872-6649 E-mail: [email protected]

Bigger isn’t necessarily better. Especially in the transmission kit business.

Each kit comes with all parts sub-packaged for your convenience, along with additional components you may need, to ensure the job gets done fast.

It’s nice to be a big kahuna, but sometimes being smaller, focused and agile is more effective.

At Precision International we understand that. That’s why for forty years we’ve focused solely on producing the best, most complete rebuilding kits for all applications. Not just the “volume numbers.”

For service, tech support, kit inventory and availability for the new-est models, to the hard to find oldies, Precision International is the source rebuilders depend on worldwide.

That’s why we’ve become GM’s largest transmission kit supplier and recently were awarded the GM Vendor of the Year Award for the second year in a row.

So the next time a car is taking up your bay and you need top-quality transmission kits fast, ask for a Precision International kit and avoid a costly wipeout.

Call us anytime for help, even when the surf’s up at 1-800-872-6649.

ADS-OctNov2016.indd 11 10/12/16 8:06 AM