The Vital Parts Product Brochure

The Vital PartsProduct Brochure

About Us

At Vital Parts Ltd we aim to provide a professional, stress freeexperience through a selection of top quality industrial products and an

easy to use website.

It is our attention to detail and exemplary customer service that hasproven to be the defining characteristic for our operations, and is why we

have adopted the slogan, we mould around you.

“I was impressed by the massive range of products available on the easy tofollow website, delivery was prompt the day aer dispatch, and all the parts ordered arrived in good condition, well labelled and of high quality. I will

definitely use this company again.” ~ G. Alker

Next Day Delivery Available

Over 1,000,000 Parts In Stock

Fast, Friendly, Efficient Service

Trusted By FTSE 100 Companies

24 Hour Operation

1www.vital-parts.co.uk01233 713 581

Contents

Gaskets & Rubber Seals

Industrial Hardware

Fixings & Fasteners

End Caps Furniture & Chair Feet

Tube Inserts

Plugs & Stoppers

Adjustable Feet

Cable Management Edging Strips

Bushes, Spacers & Washers

Pipe & Flange Protection

Knobs, Grips &Handwheels

Scaffold Protection

High Temp Masking

Anti Vibration


End Caps

0.19

0.230.31

0.390.470.55

0.62

0.70

0.78

0.50.60.8

1.01.2

1.4

1.6

1.82.0

M5

M6

M8

M10

M12M14M16

M18M20

Size mm cm Inches56

8

10

121416

1820

End Caps or ‘covers’ are versatile products coming mainly in Plastic & Rubber styles, designed for Finishing, Masking, Protection, and Sealing.

Manufactured with both industrial and household uses in mind, you can rest assured we have a cap that meets your needs.


Pull Tab Caps Grease Nipple Caps

Threaded Caps

Silicone Caps EPDM Caps

Nut Caps

PVC Caps

Secure Nut Caps

Tapered Caps Threaded Sealing Caps

Rebar Safety Caps

Post CapsHeatshrink Caps Pipe Caps

Screw Caps


End Caps

End Caps

Silicone Caps

Round Silicone Caps

Silicone Cone Caps

Silicone Eze Caps

Product Code: SIC

Product Code: SCC

Product Code: EZE

High temperature resistant up to 315°c

0.89mm - 53.47mm

3.3mm - 16mm

6mm - 21mm


Covering caps to protect a threadPerfect for high temperature masking

Durable, can use multiple times

Flexible silicone for easy installation

Resistant silicone rubber Perfect for all masking purposes

Made from a premium grade Silicone RubberCost effective covering solution High temperature resistanceFlange for easy removal


PVC Caps

Round PVC Caps

Square PVC Caps

Rectangular PVC Caps

Product Code: CAP

Product Code: SCAP

Product Code: RCAP

Manufactured from premium PVC

2.8mm - 200mm

10.7mm - 60mm

Manufactured using a premium form of PVC

3mm - 40mm

Pad printing compatible

Comes with a glossy finish as standardPerfect grip for rectangular bars

Manufactured from a high end PVC

End caps for general protection uses

Shock absorption propertiesProvides a clean, glossy black finish

Ideal for protection during transport

Glossy black finish as standardShock absorbing material


End Caps

End Caps

Stud PVC Caps Product Code: CAP

Glossy black finish

Pull Tab PVC Caps Product Code: PTC

Ideal for thread protection

High Temp PVC Caps Product Code: HCAP

Bright yellow finish

EPDM Caps Product Code: EPC

Versatile, can be stretched

Manufactured from a strong PVC

'Pull' tab for easy removal

Multiple resistive properties

Manufactured from a high temp PVC

Temperature resistant up to 210°c

For use in high temp environments

Manufactured from a high quality PVC

Metric/imperial standard sizingCovers for exposed threads/studs

Manufactured from a premium EPDMHigh temperature resistant up to 230°c

Great resistance to Acids and Alkali's

3.6mm - 41.3mm

2mm - 50.8mm

3.8mm - 11.9mm

0.89mm - 53.47mm


Screw Caps Product Code: CAP

Nut Caps Product Code: NC

EPDM Eze Caps Product Code: EZE

Available in 5 different colours

Ribbed for tight fitting

Covers for nut and bolt heads

Available in 10 different colours

Manufactured from a high grade EPDM High Temperature resistance up to 230°c

Resistant to Acids & Alkali's

Manufactured from a strong LDPEMade to fit industry sized nuts

Strong resistive properties, UV resistant

Manufactured from a strong Polypropylene

Locking covering cap includedIdeal for use with inside playgrounds

Manufactured from reliable Polypropylene

Easily cover screw headsComes with matching washers

7.2mm - 36mm

M4 - M24

M6 - M12

6 to 8 - 10 to 12


End Caps

End Caps

Threaded Sealing Caps Product Code: THC

Tapered Caps Product Code: TAC

Rebar Safety Caps Product Code: SAFE

Threaded Caps Product Code: THC

Metric, BSP, and UNF threads

Huge selection of sizes available

Screw on installation

Industry standard sizes

Manufactured from an LDPE Plastic

Built in flange around its head

Reversible cap/plug for protecting or covering

Manufactured from a LDPE PlasticErgonomic head for easy removalEasily protects exposed threads

Manufactured using a strong HDPEBuilt in Neoprene disc for sealing

Ideal for fluid / gas uses

Manufactured from a premium LDPE

Temperature & UV ResistantUsed to cover exposed poles/rebar

3mm - 52.5mm

M8 - M52

1/8” - 2 1/2”

8mm - 50mm


Post Caps Product Code: POST

Grease Nipple Caps Product Code: GNC

Heat Shrink Caps Product Code: HSC

Pipe Caps Product Code: PIP

Caps to protect an internal section

Industry standard design

Shrink to fit caps to cover an object

Covers and protects against ingress

Manufactured from strong LDPE

Prevents build up of debrisEasily fits over grease nipple

Made from durable PolyolefinGood resistive propertiesIdeal for repairing cables

Available in LDPE or PVC stylesGrey finish from standard

Great for finishing off post ends

Manufactured from a resistant Polyethylene Easily fits over the face and lip of a pipeRibbed for a tight and secure fitting

6mm

12mm - 160mm

60mm - 273mm

37.7mm - 1642mm

End Caps


Plugs & Stoppers

Plugs & Stoppers come in many shapes, types, and sizes, each designed for a selection of uses, including masking, sealing, and protection. Manufactured from high strength, resilient materials, we’ve carefully selected our range based on

feedback from our customers.

Uses

- -

-

Silicone EPDM PVC Nylon LDPE HDPE

Masking

Protection

Finishing

Sealing


Snap Fit Plugs

Threaded Sealing Plugs

Silicone Plugs Blanking Plugs

Door Stoppers

EPDM Tapered Plugs

Tapered Plugs

Threaded Plugs

Fir Tree Plugs Finned Hole Plugs

Flanged Barrel Plugs

Pipe End Plugs

Ventilation Plugs Snap Fit Bushes Plastic End Plugs

Plugs & Stoppers


Plugs & Stoppers

Silicone Plugs (315°c)

Silicone Tapered Plugs

Silicone Ribbed Plugs

Silicone Plugs with Handle

Product Code: STP

Product Code: SRP

Product Code: STPH

Made from premium high temp Silicone Rubber

2.54mm - 127mm

3.99mm - 31.75mm

4.8mm - 56mm

Made from premium Silicone Rubber

To mask off/protect threaded holes


Ideal for high temperature masking

Tapered to fit a range of widths

High temperature resistant up to 315°cEasily seals and protects excess holes

Manufactured from heat resistant Silicone

Alternative to standard plugs

Handle for easy removal/installationPlugs to mask off and cover holes


Plugs & Stoppers


Silicone Pull Plugs

Silicone Washer Plugs

Product Code: SPP

Product Code: SWP

Manufactured from a high grade of Silicone

1.6mm - 25.9mm

6.4mm - 24mm

Manufactured from a high grade of Silicone

Comes in a natural finishAll in one plug and washerFor high temperature masking uses

Pull tab for efficient removal

Large selection of colours availableIdeal for Powder Coating Masking

Plugs & Stoppers


Tapered Plugs Product Code: TAP

EPDM Tapered Plugs Product Code: ETP

Door Stoppers Product Code: SCOF

Flanged Barrel Plugs Product Code: BAP

Useful for filling & protecting

Tapered to fit range of sizes

Prevents damage to walls / doors

Great for sealing

Manufactured from resilient EPDMHigh Temperature resistant up to 215°c

Able to provide an air tight seal

Manufactured from strong resistant Rubber or TPRCounter sunk 'hidden' screw head design

Perfect for absorbing shock

Manufactured from a durable LDPE Reversible plug or cap solutionResistant against acids/alkalis

Manufactured from a strong LDPE Flanged for easy installation/removal

Acid and alkali resistant

1.6mm - 127mm

15.9mm - 35mm

2.9mm - 298mm

2.1mm - 85mm

Domed Blanking Plugs Product Code: BLA

Product Code: BLA

Body Plugs Product Code: BLA

Flexible Blanking Plugs Product Code: BLA

Thin domed head

Versatile component

Provides a clean finish

Manufactured from PVC or TPEAcid & temperature resistant Flexible for ease of fitting

Manufactured from a premium TPR

Heat resistant up to 135°cTapered shank for easy fitting

Manufactured using a heat stabilized NylonAvailable in a Black or White finishBuilt in fixing clips, locks in place

4.7mm - 51.5mm

10mm - 45mm

4.8mm - 51mm

Double D Blanking Plugs

Approximate head thickness of 1.6mmManufactured from a UL94V-2 rated Nylon

Locking fingers fit multiple panel thicknessesFor 'Double D' or flat sided mounting holes

11.9mm - 55.1mm

Plugs & Stoppers


Plugs & Stoppers

Pry Out Blanking Plugs Product Code: BLA

Insulation Plugs Product Code: BLA

Knock Out Seals Product Code: BLA

Pronged Pry Out Plugs Product Code: BLA

Head thickness ~1.6mm

No maximum panel thickness

Designed to be knocked out

Great for smaller holes

Manufactured from a UL94V-2 rated Nylon 6/6Temperature resistant -40°c to 105°cConvex matte finish style head

Manufactured from a high quality Nylon 6/6UL94V-2 or UL94V-0 flammability Industry standardised sizings

Manufactured from a UL94V-2 rated Nylon Designed to retain but not lock in placeFinished with a flat matte head

Manufactured from a UL94V-2 rated Nylon Black or Natural finishes availablePronged locking finger design

31.3mm x 17.5mm

22.2mm - 63.5mm

6.4mm - 63.5mm

.9mm - 12.4mm

Plugs & Stoppers


Shorty Viewport WIndow Plugs Product Code: BLA

Liquid Tight Break Through Plugs Product Code: BLA

VIewport Window Plugs Product Code: BLA

For panels up to 1.6mm

Finished in Black

Locking fingers for easy fitment

HB flammability rated

Manufactured from a UL94V-2 rated Nylon Range of standard fitment optionsRectangular style head

Manufactured from a UL94V-2 rated PolycarbonateClear finish for easy internal viewingRound and oval styles available

Manufactured from a UL94V-2 rated PolycarbonateSingle locking position for thinner panelsFor adding an internal viewing port

Can be broken through or used as a liquid tight plugManufactured from Nylon 6/6 and TPE RubberLiquid tight rated to IP67/68 standards

24.5mm - 26mm

4.7mm - 50.8mm

13mm - 25.7mm

12.7mm - 38.1mm

Rectangular Blanking Plugs Product Code: BLA

Plugs & Stoppers


Plugs & Stoppers

Fir Tree Plugs Product Code: FTP

Threaded Plugs Product Code: THP

Threaded Sealing Plugs Product Code: THP

Barbed for security

Protects internal thread

Useful with oils, liquids and gases

Manufactured from a durable Polyethylene Screw in thread protection solutionErgonomic gripping head

Manufactured from a strong HDPE Plastic

Built in Nitrile O-Ring for sealingProvides a high quality seal

Manufactured from a strong Nylon 6/6Durable and long lasting solutionLocks panels into place

M10 - M42

M10 - M52

3mm - 10mm

Liquid Tight Blanking Plugs Product Code: BLA

UL94V-0 flammability rating

Liquid tight, Oil tight and submersible productManufactured from a resistant TPE RubberUL certified for outdoor applications

12.7mm - 34.9mm

Plugs & Stoppers


Plugs & Stoppers


Finned Hole Plugs Product Code: FIN

Tube End Plugs Product Code: TUBE

Pipe End Plugs Product Code: RPP

Seals of excess holes

Masks off hole/washer area

Prevents ingress and wear

Designed for use with packing tubes

Manufactured from quality TPR High temp resistant to 125°c

Acid and alkali resistant

Manufactured using a strong LDPE plasticMultiple ribs to promote a secure fitSeals for the end of a tube or pipe

Manufactured from a blue LDPE plasticFinned ribs for a tight and secure fitting

Pull tab for easy installation & removal

Manufactured from a durable LDPE

Industry standard packaging tube sizes

Available in Black / White

3.2mm - 47mm

10mm - 114.3mm

9.5mm - 28.6mm

1” - 10”

Washer Masking Plugs Product Code: WMP

Plugs & Stoppers

Liquid Tight Snap In Vent Plugs Product Code: VENT

Vent Plugs Product Code: VENT

Louvered Vent Plugs Product Code: VENT

IP 65 / 67 / 68

Heat resistant from -40°c to 105°c

Used as a ventilation solution

Manufactured from high quality Nylon 6/6Comes with or without Polyurethane filterThin head & fixing clips for flush fitment

Manufactured from a UL94-V2 flammability

Temperature resistance -40°C to 105°C Available with/without Polyurethane filter

Manufactured from a UL94V-2 Nylon 6/6 bodyPressure compensating sealing washer

Maximum airflow: ≥16.6 LPM/3.7cm2 @ 13.5 psi

12.7mm - 101.6mm

22.2mm - 76.2mm

12.7mm - 28.6mm

Snap Fit Plugs Product Code: SFP

Ergonomic design

Manufactured from a strong LDPE Easy to install and removeFor filling in excess holes

M10 - M42

Plugs & Stoppers


Plugs & Stoppers


IP 65 / 67 / 68

Manufactured from high quality Nylon 6/6Pressure compensating sealing washerPrevents contamination and ingress

M12 - M20Liquid Tight Threaded Vent Plugs Product Code: VENT

Threaded Vent Plugs Product Code: VENT

Multiple resistive properties

Manufactured from high quality Nylon 6/6Hex shaped head for wrench installationNPT, PG and Metric thread types

M12 - M20

Multiple locking steps

Made from a UL94V-2 rated Nylon 6/6Split design fits range of cable widthsInsulates and protects exposed wires

7mm - 63.5mmOpen/Closed Bushes Product Code: SFB

Snap Fit Bushes Product Code: SFB

Available in White or Black

Manufactured from a UL94V-2 rated Nylon 6/6For insulating and threading cablesSingle or multiple locking steps

4.7mm - 19.1mm

Plugs & Stoppers


Armor Cable Bushings Product Code: SFB

Smooth central bore

Chamfered edge for easy install

Manufactured from a UL94V-2 rated Nylon 6/6Mechanically protects and insulates cablesNPT threaded from 1/4 to 3/4

Manufactured from a High Dielectric PolyethyleneWithstands temperatures as low as -40°CFor use with BX or FMC type cables

1/4” - 3/4”

9.4mm - 18.5mm

Threaded Smooth Bore Bushings Product Code: SFB

Plastic End Plugs Product Code: PIP

Cost effective product

Manufactured from a high quality LDPE PlasticAvailable for Square and Rectangular tubesGreat for protection against ingress

21mm - 80mm

Furniture & Chair Feet

Surface Glide Material Feet Material

Carpet

Wood

Vinyl

Tile

Stone

Concrete

Rubber

PTFE / Metal

Felt / PTFE

PTFE / Nylon

Felt /PTFE

PTFE / Nylon

Metal

Metal / Nylon

Plastic

Rubber / Plastic

Plastic

Rubber

Plastic

Plastic

Plastic / Rubber

Being one of the UK’s largest supplier of chair and furniture feet, our selection is vast and includes products designed for all kinds of uses, from school chairs to sofas. Manufactured from carefully selected anti marking materials, we aim to

provide fantastic quality every time.





Stick On Feet

Plastic & RubberFerrules

Chair & Furniture Castors

Screw On Feet

Chair & Furniture Glides

Saddle Feet

Sofa Feet

Push In Feet




Plastic and Rubber Ferrules

Round Tapered Ferrules

Round Flat Ferrules

Round Angled Ferrules

Product Code: FERR

Product Code: FERR

Product Code: FERR

Manufactured from anti-marking LDPE

9.5mm - 19mm

19mm - 114.3mm

16mm - 22mm


Replacement ferrules Highly durable optionIdeal for large furniture / desks

Tapered base Black finish from standard For angled / flat chair or furniture legs


Angled base

Designed for angled chairs/furnitureGlossy Black finish



Square Plastic Ferrules

Styled Ferrules

Crutch Style Rubber Ferrules

Product Code: FERR

Product Code: FERR

Product Code: FERR


19mm - 60mm

12mm - 32mm

16mm - 25mm

Manufactured from a durable Neoprene

Comes in 3 different stylesGreat for chairs and furniture

Compatible with walking sticks / crutches

Suitable for hard or wooden flooring

Fits a wide range of furnitureBlack and White options stocked

Manufactured from a heavy duty Rubber Ferrules for walking sticks or crutches

Metal washer reinforced baseGrey or black versions in stock




Screw On Glides

Adhesive Glides

Product Code: NAI

Product Code: PAD

19mm - 60mm

10mm - 65mm

Manufactured from a premium PTFEScrew in feet for chairs and furniture

Reinforced steel washer baseIdeal for heavy / moderate uses

Available in felt or PTFE Available in a variety of shapes

Strong and reliable adhesive backingHelps furniture glide across a surface

Insert Glides Product Code: RO

Available with a PTFE or Felt base

16mm - 32mm

Easily installed into tubes

Ribbed for a tight and secure fittingPerfect for gliding across a surface

Metal Spring Insert Glides Product Code: RO19mm - 38mm

Manufactured from a premium Steel

For hard/so floors

Glides for heavy furniture or appliances

Ideal for metal tubing



Tilting Felt Glides Product Code: RO14mm - 22mm

Manufactured from a premium Polyethylene & Felt Suitable for tubular Chairs/AppliancesComes with a ball joint tilting baseFelt base to reduce friction

Metal Nail-On Glides Product Code: NAI19mm - 30mm

Manufactured from a high quality metal

Chrome finish

Ideal for both so and hard surfacesEasy to fit nail insert

Teflon Nail-On Glides Product Code: NAI

Manufactured from Teflon & Steel

19mm - 30mm

Simple install

Easily glides furniture and chairsNail insert glide solution

Nylon Nail-On Glides Product Code: NAI19mm - 27mm

Manufactured from a high quality Nylon

Easy to fit product

Available in brown and natural finishesPerfect for gliding or sliding



Round Angled Chair Feet Product Code: RO

Round Chair Feet Product Code: RO

Round Coloured Chair Feet Product Code: RO

Round Domed Chair Feet Product Code: RO

Designed for angled tubular legs

Ideal for tubular legs

Easy to fit replacement feet

Domed head

Manufactured from a premium LDPELong lasting and durableSimple push fit design

Manufactured from a premium LDPE Available in 5 bright colours

Provides stability and grip


Available in 6 coloursStrong external shank for fitting

Manufactured from a high quality LDPE

Ribbed for ease of fitting For use with angled or uneven flooring

10mm - 47.5mm

19mm

16mm - 25mm

16mm - 76.2mm



Square Chair Feet Product Code: SQ

Square Angled Chair Feet Product Code: SQ

Thick Base Feet Product Code: RO

Wide Base Feet Product Code: RO

Fits box sections

Spreads weight across its base

Great for adding height to chairs / furniture

Prevents scratching of floors

Manufactured from a strong LDPE Perfect for heavy furniture/chairs

Ideal heavy duty upgrades

Manufactured from a Black Polyethylene Ribbed for a secure installationThick base for height

Manufactured from a strong LDPE Weight distribution properties Ribbed for tight fitting

Manufactured using a high quality LDPE Good for weight distribution and gripIdeal for angled chair/desk legs

26mm - 36mm

15mm - 38mm

10mm - 90mm

15mm - 25mm




Rectangular Chair Feet Product Code: REC

Square Domed Chair Feet Product Code: SQ

Square Coloured Chair Feet Product Code: SQ

Rectangular Angled Chair Feet Product Code: REC

For use with a range of surfaces

Multi-purpose domed head

Provides grip and stability

Angled base

Manufactured from a durable LDPE Ribbed for a tight secure fitting

For use with angled legs

Manufactured from quality LDPEAvailable in 5 bright colours

Ribbed for secure fitting

Manufactured from a strong LDPE

Weight resistant design Ribbed for tight fitting

Manufactured from a strong LDPE Ribbed for a secure fittingFor use with angled legs

20mm - 25.4mm

19mm

10mm - 50.8mm

15mm - 50mm



Castor Cups Product Code: CST

Tower Castor Glides Product Code: CST

Perfect for Office Chairs

Replacements for castor wheels

Manufactured from a Black Polypropylene

Designed to fit common castor Prevents movement of a wheel

Manufactured from Polyamide Plastic & SteelAids movement of heavy applications

Provides a sturdy base

60mm

50mm


Tube Saddle Feet Product Code: SAD

Screw On Rubber Feet Product Code: SCOF



Screw On Plastic Feet Product Code: SCOF

Runs parallel to floor

Feet for heavy furniture

Aids movement of furniture

Manufactured from strong resistant RubberCounter sunk 'hidden' screw head areaIdeal for use with wooden furniture

Manufactured form a strong PolypropyleneGreat for use with so surfaces Prevents damage to surfaces

Manufactured from LDPE or Nylon 6/6Use with tubular Chairs & FurnitureAvailable with/without fixing peg

15.9mm - 35mm

20mm - 40mm

14mm - 30mm

Screw On TPVC Feet Product Code: SCOF

Black or white finish

Manufactured from an anti marking TPVCSupplied with matching screwsExcelent grip properties

16mm - 50mm



Sofa Feet Product Code: SOFA

Push In Feet Product Code: PIF

Tube Saddle Bases Product Code: SAD

Comes in 3 different styles

Fixes into tubular chairs / furniture

Quick and easy to fit


Fixing pegs as standardActs as feet for parallel tubes

Manufactured from a strong and durable PVCPrevents scratching of surfacesAvailable in eight styles

Manufactured from high strength materials Upgrades or replacement Sofa FeetTested across many surfaces

22mm - 30mm

7.9mm - 25.3mm

35mm - 90mm

Tube Saddle Glides Product Code: SAD

Available in 8 styles

Specifically designed for tubular Furniture Reduces friction and prevents scratchingEasily installed via screw/peg

1mm - 53mm



38mm Castors Product Code: CST

Braked versions also available

Manufactured from high strength polyamideAvailable in both hard and so wheel typesStemmed, Threaded, & Fixed Plate types

10mm - 55mm

75mm Castors Product Code: CST

We offer braked and unbraked versions

Large diameter made for an ease of movementMade from a polyamide and steel pairingStemmed, Threaded, & Fixed Plate types

50mm - 125mm

Conductive Castors Product Code: CST

We offer braked and unbraked versions

Designed to dispel the build up of static electricityMade from a polyamide and polyurethaneStemmed, Threaded, & Fixed Plate types

50mm - 125mm

50mm Castor Wheels Product Code: CST

Braked versions also availableManufactured from high quality materialsAvailable in both hard and so wheel typesFits the majority of office chairs and furniture

10mm - 11mm




Stick On Feet Product Code: SOF

Installed in seconds

Manufactured from a high quality Rubber

Strong self adhesive backingRecommended as appliance feet

6.4mm - 45.7mm

Antimicrobial Castors Product Code: CST

Comes in all fitments

Made from a polyamide and polyurethaneSpecialised anti-microbial coatingSo tyre for hard surfaces

50m - 125mm


Tube Inserts

16mm 19mm 22mm 25mm 30mm

Match the outside diameter of your tube to the outside diameter of our Tube Inserts.

*Please note wall thicknesses may vary*

For more information, visit our fitting guide here: https://www.vital-parts.co.uk/vital-guide-to-tube-inserts-26-w.asp

Tube Inserts or ‘Tube End Caps’ are popular for a variety of uses from Chair Feet, to End Caps for tubes. Stocked in almost every size and shape imaginable, you can guarantee that we have the perfect option for your desired application.

Are you unsure of what size insert you need?


Tube Inserts

Thin Head Tube Inserts

Threaded Tube Inserts

Square Tube Inserts

Rectangular TubeInserts

Round Tube Inserts

Oval Tube Inserts

Domed Tube Inserts Tube Connectors

Chromed Tube Inserts


Tube InsertsTube Inserts

Threaded Tube Inserts

Round Threaded Tube Inserts

Square Threaded Tube Inserts

Rect. Threaded Tube Inserts

Product Code: ROT

Product Code: SQT

Product Code: RECT

Manufactured using a strong LDPE

M6 - M12

M6 - M12

M6 - M10


Fits into box sections

Ribs for tight fitting and stabilityCompatible with male threads

Adds functionality to a tubeCompatible with Machine feet

Ribbed shank for fitting

Manufactured from a strong LDPE plastic

Variety of sizes

Ribbed for tight fittingMulti-purpose design

Heavy Duty Threaded Tube Inserts

*SS = Stainless Steel

Metal Threaded Tube Inserts

Spring Threaded Tube Inserts

Product Code: SQT/ROT

Product Code: MTI

Product Code: SPR

Manufactured from a reinforced Nylon

M10 - M20

M10 - M12

M6 - M10

Manufactured from strong Aluminium

Excellent weight ratingIdeal for use with threaded feetRound, Square, or Rectangular sizes

Ribbed for secure fitNickel plated Brass or SS thread

Heavy-duty solution

Manufactured from a strong Spring Steel

Prevents flow-drilling Secure internal fittingSimple to fit and install option


Tube Inserts



Round Heavy Duty Tube Inserts Product Code: RO

Round Tube Inserts Product Code: RO

Round Angled Tube Inserts Product Code: RO

Square Tube Inserts Product Code: SQ

Easily installed

Prevents ingress

Strong external shank

Flush fitting

Manufactured from a strong LDPERibbed to promote tight fittingIdeal for finishing tubes

Manufactured from a strong LDPEAvailable in 6 different colours

Angled base for use with angled tubular legs

Manufactured from a Black PolyethyleneEquipped with an extended baseSupports heavy applications

Manufactured from a strong LDPE PlasticDesigned for box sections Ribs for a stable fitting

10mm - 195mm

16mm - 25mm

15mm - 38mm

10mm - 150mm


Tube Inserts

Rectangular Angled Tube Inserts Product Code: REC

Oval Tube Inserts Product Code: OV

Rectangular Tube Inserts Product Code: REC

Square Angled Tube Inserts Product Code: SQ

Angled base

Prevents ingress into a tube

Great for blanking

Multi-purpose part

Manufactured using a strong form of LDPE Ribbed for tight and secure fitting

Angled base from standard

Manufactured using a hard wearing LDPE

Ribbed for a tight secure fittingFor use with Tubes, Pipes & Posts

Manufactured from a strong LDPE Ribbed for a tight secure fittingMulti purpose design

Manufactured from a strong LDPEGreat for finishing oval tubesRibbed for a tight fitting

15mm - 25mm

15mm - 76.2mm

15mm - 50mm

10mm - 60mm



Domed Tube Inserts Product Code: RO/SQ

Oval Angled Tube Inserts Product Code: OV

Chromed Tube Inserts Product Code: RO/SQ/REC/OV

Thin Head Tube Inserts Product Code: RO/SQ/REC

Provides an aesthetic finish

Ribbed for a secure fit

Ideal for finishing off holes

Discrete application

Manufactured from a strong LDPE Oval shaped with angled headFor use with oval tubes

Manufactured from a high quality LDPERound, Square, or Oval sizes

Clean chromed finish

Manufactured from a strong LDPE PlasticFitted with ribs for tight fitting

Round and Square sizes

Manufactured from a strong LDPE Ribbed shank for security Round and Square sizes

30mm x 15mm

13mm - 80mm

16mm - 76.2mm

10mm - 88.9mm


Tube Inserts

Plastic Threaded Tube Inserts Product Code:

Easy to fit

Manufactured form high quality LDPE

Cheaper alternative to steel threadRound, Square, or Rectangular sizes

M6 - M12

Round Straight Tube Connectors Product Code: TC

Saddle Tube Connectors Product Code: TC

Tube Connectors Product Code: TC

Suitable for round tubes

For square box sections

Expanding ribs

Manufactured from a high quality NylonPerfect for all kinds of metal tubingComes in 7 different styles

Manufactured from Nylon 6/6 & Zinc Steel For use with round tubes or sectionsThreaded insert for fixing

Manufactured from a high quality Nylon & Zinc Steel Provides a straight or 180° connectionGreat for extending tubing

20mm - 30mm

15mm - 32mm

15mm - 40mm

High Temp Masking Solutions


180 μ (micron)

Tape Temp Resistance Thickness Adhesive Property

Polyester

25 micron Polyester

Polyimide

Anti-static Polyimide

Aluminium

Glass Gloth

Crepe

Matte Cloth

PTFE

230°c

180°c

260°c

260°c

180°c

170°c

80°c

Malleable

Strong

260°c

50 μ (micron)

25 μ (micron)

0.3mm

Silicone

Silicone

Silicone

Silicone

Rubber

Rubber

Silicone

Flexable

High Temp

Anti-Static

Conductive

Strong

Frictionless

Precision

As a UK High Temperature Masking Supplier, we have a variety of solutions carefully designed for masking uses, put through rigorous tests to ensure high performance. Offering many solutions from High Temp Tapes, to Pre-Cut Discs For Wheels, see why we’re one of the most trusted masking suppliers.

60 μ (micron)

60 μ (micron)

110 μ (micron)

180 μ (micron)

80 μ (micron)

120°c Acrylic

Silicone

Alloy Wheel Masking Discs

Masking Caps

Masking Plugs

Masking Kits

Masking Hooks

Custom Die Cut Shapes

Masking Discs

Silicone Flange Plugs

Silicone RectangularCovers

Silicone WasherCaps

Masking Tapes




Alloy Wheel Masking Discs

Starter Kit

High Temp Masking Kits

Complete Kits

Product Code: ALLOY

Product Code: KIT003

Product Code: KIT



Selection of Caps and Plugs

2.7mm - 18.54mm

1.6mm - 38mm

Selection of Caps, Plugs, and TapesGreat value for money

Temperature resistant silicone to 315°cPrecision or Complete Kits available

12 different sizes of caps and plugsTemperature resistant silicone to 315°c

Great starter option

Manufactured from High Temp Crepe Paper

145mm - 200mm

Covers the rear wheel hub during coating

Temperature tested up to 160°cRubber pressure adhesive backing



Cap Kits

Plug Kits

Tape Kits

Product Code: KIT

Product Code: KIT

Product Code: KIT

80pc, 100pc and 150pc options

2.3mm - 18.54mm

1.6mm - 53.98mm

3.2mm - 50mm

7 different options of Kits Great for masking off holes Temperature resistant silicone to 315°c

EPDM Plug Kit available

Range of sizes

Temperature resistant silicone to 315°c

Range of options

General and Precision Kits available

Precision Kit: 3.2mm, 9.5mm, 12.7mm, 6mmAvailable with Polyester or Polyimide Tape General Kit: 12.7mm, 25.4mm, 50mm




Silicone Plugs Product Code: STP

Silicone Caps Product Code: SIC

EPDM Caps Product Code: EPC

EPDM Plugs Product Code: ETP

Perfect for masking

Versatile solution

Versatile, can be stretched

Tapered to fit range of sizes

High temperature resistant up to 315°cPerfect for all masking purposesResistant Silicone rubber


Great resistance to Acids and Alkalis

High temperature resistant up to 315°cEasily seals and protects excess holesTapered to fit a range of widths


Great resistance to Acids and Alkalis

0.89mm - 53.47mm

0.89mm - 53.47mm

2.54mm - 127mm

1.6mm - 127mm



Polyimide Discs Product Code: ULD

Custom Die Cut Shapes Product Code: DIE-CUTS

Can be cut to fit

Excellent for painting, coating, etc.

Ideal for masking

Call us now to enquire on 01233 713 581

Manufactured from a Copper Plated Steel

Available in C / V / S variations

Range of sizes, lengths and widths

Manufactured from Green Polyester FilmHigh temperature resistant up to 220°cSpecially formulated adhesive

Ultra high temperature resistant up to 260°cStrong and versatile physical propertiesPerfect for all kinds of masking uses

We have the ability in house to cut to your requirementsAvailable across our full range of Masking Tapes

Cut to any shape you require

3mm - 150mm

3mm - 150mm

1mm+

Polyester Discs Product Code: HID

Masking Hooks Product Code: C/V/S1.2mm - 10mm




Amber Polyimide Tape Product Code: ULT

Green Polyester Tape Product Code: HIT

Blue & Red Polyester Tape Product Code: HIT

Can be used with coils

Available as lightweight 25 micron tape

For all masking uses

For specialist applications

High temperature resistant up to 220°cIdeal for anodising/powder coatingSpecialized Silicone adhesive

Manufactured from Blue or Red PolyesterHigh temperature resistant up to 230°cSilicone adhesive backing

Ultra high temperature resistant up to 260°cVersatile form of masking tape Strong adhesive backing

Chemical and moisture resistant Aluminium Reflects both light and heat

Thermally conductive

3.2mm - 250mm

3.2mm - 250mm

3.2mm - 250mm

3mm - 250mmAluminium Foil Product Code: ALUM



Matte Cloth Tape Product Code: SHOT

PTFE Tape Product Code: HIT

For Sandblasting / grit-blasting

Abrasion resistant

No residue

High tensile strength

High temperature resistant up to 180°c+

Backed with a Silicone adhesiveRobust blasting/fabrication tape

Manufactured from a strong Crepe PaperHigh temperature resistant up to 170°cStrong Silicone adhesive

Reliable closely woven saturated PolythenePremium high bonding adhesive

Multiple resistance properties

Manufactured from frictionless PTFEHigh temperature resistant up to 180°c

Silicone adhesive backing

3mm - 50mm

50mm

5mm - 50.8mm

High Temp Crepe Tape Product Code: CRP

Glass Cloth Tape Product Code: SHOT3mm - 250mm




Silicone Thread Mask Plugs Product Code: TMP

Silicone Double Flange Plugs Product Code: DPP

Silicone Flange Plugs Product Code: FPL

Designed for threaded holes

Great for masking

Colour coded

Common sizes available

Manufactured from high temperature siliconeResistant to up to 315°c of heatAvailable in a range of colours

Manufactured from high grade silicone rubberHigh temperature resistant up to 315°cGreat for masking purposes

Manufactured from high temperature siliconeCapable of withstanding up to 315°c

Easy to install and remove

Manufactured from high temperature siliconeCapable of withstanding up to 315°c

Colour options stocked

M6 - M18

7.4mm - 18mm

M3 - M30

3mm - 250mmSilicone Rectangular Covers Product Code: RCOV



Colour coded by size

Colour coded

Manufactured from high temperature siliconeWithstands temperatures up to 315°cGreat for all masking purposes

Manufactured from high temperature siliconeHigh temperature resistant up to 315°cRange of sizes available

M3 - M20Silicone Washer Caps Product Code: WC

Silicone Step Plugs Product Code: STEP5mm - 12.4mm

Adjustable Feet


Adjustable Feet are offered in over 17 different styles with unique properties, from Anti Vibration to a Tilting Base. We understand that sometimes too much choice is confusing, which is why we offer a selection of ready to install sets

for easy match up with your application, along with a number of useful resources.

One Piece Adjustable Feet

General AdjustableFeet

Low Profile AdjustableFeet

Weight Rated Articulating Feet

Slotted Head Adjustable Feet

Rubber Adjustable Feet

Polyamide Adjustable Feet

Metal Adjustable Feet

Weight Rated TiltGlide Feet

Stainless Steel CoveredFeet

Alen Key Feet

Adjustable Feet


Adjustable Feet


Adjustable Feet

Hexagon Adjustable Feet

Washing MachineFeet

Economic AdjustableFeet

Teflon Adjustable FeetReady To Install Sets

Machinery Mounting Feet

Stainless Adjustable Feet

Tilting AdjustableFeet

Adjustable Feet


How To Measure Adjustable Feet:

When measuring Adjustable Feet, it is important to have a good idea of the key requirements that will enhance the day-to day performance. Also, it is important to hold a consideration for weight capabilities. Outlined within the image below are the most important parts to consider when measuring up your Adjustable Feet.

1. Base Diam1. Base Diameter: To find the base diameter of the foot, you should measure the size across the base as labelled within the diagram.

2. Thread Length: The thread length of an adjustable foot is oen the distance between the stud and bolt. The stud is the part labelled ‘thread size’. The bolt is the section where the thread joins the base.

3. Th3. Thread Size: To find the metric thread size of a foot, you should start by measuring the diameter across the thread. This can be done by putting the ruler against the stud of the adjustable foot (labelled thread size in diagram) and taking the measurement in millimetres.

Adjustable Feet


Adjustable Feet

Low Profile Adjustable Feet Product Code: LOW

General Adjustable Feet Product Code: ADJ

Slotted Head Adjustable Feet Product Code: GAMF+GFMF

Weight Rated Articulating Feet Product Code: WFMF

Good level of grip strength

Ideal for medium to heavy uses

Ideal for medium to heavy uses

Weight rating of up to 2000kg

Manufactured with a reinforced Nylon Base

Metric threaded male studs

Articulating or fixed bases available

Manufactured with a reinforced Nylon Base

Slotted head for adjustment

Articulating / fixed bases available

Manufactured with a Nylon or Polyethylene base

For use with height restricted applicationsAvailable in a range of small thread lengths

Heavy duty reinforced Nylon baseSteel alloy Stud and male thread

As mounts for machinery and conveyors

M6 - M12

M6 - M12

M5 - M10

M8 - M12

Adjustable Feet


Polyamide Adjustable Feet Product Code: ADJ

One Piece Adjustable Feet Product Code: OPF

Excellent weight rating - 500-600kg

For stabilizing Furniture or Machinery

Weight rated up to 2000kg

One piece solution

Manufactured from a premium Rubber/NitrileAvailable in Tapered, Straight or Octagonal basesExcellent vibration and shock dampening properties

Produced with a reinforced Nylon basePremium Steel alloy thread and StudBall joint base allows for tilt

Manufactured with a Polyamide for the baseAvailable in Zinc or Stainless Steel threadsAllen key height adjustment from above

Manufactured using a reinforced NylonHeight adjusted to meet requirementsAvailable for round and square tubes

M6 - M12

M8 - M10

25mm - 80mm

Weight Rated Tilting Feet Product Code: ADJ

Rubber Adjustable Feet Product Code: WAMFM6 - M12

Adjustable Feet

Machinery Mounting Feet Product Code: MMF

Metal Adjustable Feet Product Code: ADJ

Adjustable Feet


Tilting Adjustable Feet Product Code: ADJ

Stainless Adjustable Feet Product Code: ADJ

Rubber padded base available

Ideal for machinery or appliances

Allows for a thread tilt up to 20°

Levelling base up to 5°

Manufactured from a strong Zinc Plated Steel

Weight rated up to 650kg per footAvailable in bolt down / standard

Available in Standard or Bolt-down variants

Good for angled applications

Excellent for use with Machinery & Conveyors

Manufactured using a strong galvanized SteelComes with bolt holes for securing

Allows for 8° of articulation

Manufactured using Stainless Steel & Rubber

Rubber base for additional gripMeets USDA food hygiene guidelines

M8 - M10

M8 - M20

M16 - M20

M10 - M30

Adjustable Feet


Economic Adjustable Feet Product Code: ADJ

Thread lengths up to 100mm

Ideal load rating of 200kg

Excellent level of stability

Manufactured from a premium EPDM Shore A 70 Helps to reduce vibration and noiseScrew in replacement for washing machines

Manufactured from a strong HDPE or Nylon Unique six point hexagon baseIdeal for medium weights

Available in Black & WhiteMade from Polypropylene & Zinc Plated Steel

Great for both light and medium uses

M8 - M12

M4 - M12

Hexagon Adjustable Feet Product Code: ADJ

Washing Machine Feet Product Code: WAMFM10

Ready To Install Sets Product Code: ADJ

For Tubes: Threaded Insert & Matching Feet

For Mounting: Brackets & Matching FeetFor Wood: Wood Fixings & Matching Feet

M4 - M12

Adjustable Feet


Adjustable Feet

Teflon Adjustable Feet Product Code: ADJ

Metric thread sizes available

Manufactured from a premium Teflon & Steel

Great for use as Glides or SlidersRecommended for carpet, wood, and tile

M6 - M10

Stainless Steel Covered Feet Product Code: ADJ

Range of metric thread sizes

Manufactured from Stainless Steel & PolypropyleneWith or without allen key slot at the top of threadWeight ratings of up to 550kg per foot

M8 - M10

Allen Key Feet Product Code: ADJ

Large range of sizes available

Zinc Plated Steel & Polyamide or Polypropylene baseAvailable with either a fixed or swivel baseComplete with allen key slotted head

M6 - M10

Adjustable Feet


Weight Guide For Adjustable Feet:

Many of our Adjustable/Threaded Feet variants come with a specified weight rating. This is where they are tested up to a particular level, proving beneficial for heavy uses where an idea of their performance is key. Our table below shows the weight ratings of our Weight Rated Feet. However, we also show ratings on many other products inside our range.


Cable Management

Rubber Grommets

Cable Glands

Heatshrink Caps

Organizing and threading desk cables

Blanking off holes in a wall or panel

Orgainising wires in dense areas

Managing, protecting and sealing cables from damage

Providing strain relief and holding cable position

Product

Snap Fit Bushes

Blanking Plugs

Desk Cable Tidies

Used For

Heatshrink Tubing

Managing and protecting cables from damage

Cable Clamps

Protecting / joining wires or concealing exposed connections

Sealing off frayed cable connections

Management of cables and wires

Cable Management products are popularly used by a range of professionals, from Electricians to DIY Enthusiasts looking to renovate a home. Offering a high quality finish and aesthetic designs, we offer a solution for almost every

eventuality.

Cable Tie Mounts


Cable Management

Cable Glands Snap Fit Bushes

Desk Cable Tidies

Rubber Grommets

Cable Clamps Heatshrink Tubing 2:1

Heatshrink Tubing 3:1 Adhesive Lined Heatshrink

Heatshrink Caps

Cable Ties Strain Relief Bushings Snap In Cable Glands

Standard Strain Relief Lockit Strain Relief Strain Relief Pliers


Cable ManagementCable Management

Closed Rubber Grommets Product Code: CLG

Metric / PG Cable Glands Product Code: CLG

Flex-Protecting Cable Glands Product Code: CBG

Open Rubber Grommets Product Code: OPG

Flame retardant

Comes with a matching locking nut

Comes with lock nuts

Flame retardant properties

Manufactured from Nylon & Nitrile Rubber

IP 68 rated productMetric and PG type threads

Manufactured from a Nylon & Nitrile Rubber

IP 68 rated product

Flexible area prevents cable from bending

Manufactured from a quality PVC/TPEClosed mid section to prevent ingressProvides an quality seal

Manufactured from a highly resistant EPDM Ideal for protecting and threading cablesProvides a quality air tight fitting

M12 - M32

M12 - M25

6.4mm - 42mm

5mm - 52mm


Cable Management

Open / Closed Bushes Product Code: SFB

Quick solution for cable management

Durable and resistant

Open/Closed design

Produced using a high quality PVC/TPE

Simple push fitting GrommetPerfect for Electronics uses

Manufactured from a premium Black PVCProtects wires, cables and pipesFits a range of diameters

Manufactured from a premium Nylon 6/6Fits a range of cable widthsProtects exposed wires

12.7mm - 26mm

7mm - 38.1mm

Stepped Rubber Grommets Product Code: GRM

Quick Fit Rubber Grommets Product Code: GRM10mm - 28mm


Cable ManagementCable Management

Desk Cable Tidies Product Code: DCT

Universal Bushes Product Code: UNB

Universal Open / Closed Bushes Product Code: SFB

Easy to fit design

Perfect for cable protection

Made from a high quality NylonFits a range of cable widthsFixing clips for security

Anti rattle design reduces cable vibration

Manufactured from a high quality NylonOpen design that can be retrofitted to cables

Fixing clips for easy installation

Manufactured from a strong LDPE Perfect for protecting/organizing Ideal for offices and desks

7mm - 27mm

7mm - 38.1mm

60mm - 80mm

Snap Fit Bushes Product Code: SFB

Available in Black & White

Manufactured from a heat stabilized NylonFor a wide range of panel thicknesses

Ideal for threading cables

4mm - 100mm

Cable Management


Cable Management

Heat Shrink Tubing 2:1 Product Code: HST

Multiple uses per unit

Manufactured from a high quality Polyolefin Sleeves to join or connect two wiresShrinks to fit at a ratio of 2:1

1.2mm - 25.4mm

Adhesive Lined Heatshrink Product Code: HST

Heat Shrink Caps Product Code: HSC

Insulates & protects

Insulates & protects

Shrink to fit caps

Manufactured from high quality PolyolefinShrinks to fit all applications at 3:1Multi purpose product

Manufactured from a high quality PolyolefinAdhesive lined internal sectionShrinks down to fit

Made from durable Polyolefin

Good resistive propertiesIdeal for sealing off cables

1.5mm -39mm

3mm - 40mm

12mm - 160mm

Heat Shrink Tubing 3:1 Product Code: HST


Cable Management

Cable Tie Pin Product Code: CABM

Both permanent and temporary solutions

Designed for use with cable tiesLow price compared to other solutionsFor guiding or managing cables and wires

Cable Tie Brackets Product Code: CABM

Cable Ties Product Code: CT

Excellent for wall mounting

For general cable management

Individiaul or pack sizes in stock

Manufactured from high quality Nylon

Compatible with cable ties

Black and white colours in stock

Manufactured from a high strength NylonAble to fit heavy duty cable ties

Available in screw and self adhesive types

Made from a high quality UL94V-2 rated Nylon 6/6Serrated internal section for improved gripAvailable in a range of sizes and colours

Saddle Cable Tie Mounts Product Code: CABM

29mm

15.9mm - 25mm

50mm x 26mm

50mm x 26mm

Liquid Tight Bushings Product Code: STRB

IP 65, 66, 67, and 68 rated

Manufactured from a high quality Nylon 6/6

UL listed

Rounded interior edges for installation ease

Snap In Pigtail Glands Product Code: STRB

Flexible area prevents cable from bendingSnap into panel and self retains, no nut needed

IP 65 rated sealUL and CSA certified

7.1mm - 11.2mm

5.3mm - 39.6mm

Cable Clamps Product Code: PCL

Holds cable in position


Cable Management

Manufactured from a high quality Nylon 6/6Aids cost effective cable managementPerfect for clamping cables or wires

1/8” - 5/8”

Bell Mouth Strain Relief Product Code: STRB

Straight through cable design

Absorbs shock and push/pull forces on a cableManufactured from UL94V-2 rated Nylon 6/6Pliers required for max panel thickness

9.5mm - 15.9mm


Cable Management

Bushings For Non Round Holes Product Code: STRB

Passes UL pull out test requirements

Manufactured from a UL94V-2 rated Nylon 6/6

For square or rectangular holes

Three finger 'lockit' design for snap fit

RDD Right Angle Bushings Product Code: STRB

Lockit' finger design for snap fit to a panelManufactured from a UL94V-2 rated Nylon 6/6

No installation tools requiredSuits double D holes to prevent rotation

11.5mm - 17.5mm

15.9mm - 22.2mm

RDD Flex Protect Bushings Product Code: STRB

Nylon spring protects cable

Manufactured from a UL94V-2 rated Nylon 6/6Multiple finger 'lockit' design for snap fitPasses UL pull out test requirements

Multiple Sizes

Strain Relief Assembly Pliers Product Code: STRB

For use during assembly

Required to meet manufacturer specificationInstallation drawings available online

High quality product with multiple adjustments

Multiple Sizes


Cable Management

Serrated and unserrated available

Can be cut to fit

Manufactured from a high quality Nylon

With or without an adhesive liningTemperature resistant 40°C to 85°C

Manufactured from a high quality Polyethylene Available in both Black or Natural finishesComes in roll lengths of 30.5 metres

0.9mm - 2.7mmPolyethylene Grommet Strip Product Code: EDGE

Nylon Grommet Strip Product Code: EDGE0.7mm - 2.7mm


Fixings & Fasteners

Connecting furnitureConnecting and increasing the strength of furniture joinsConnecting with lock nuts to offer connection points

Fir Tree PlugsP-Clip

Locking Wing Nut

Product Used ForFurniture Connector Nuts Furniture Connector BoltsCross Dowel Barrel NutsCam Bolt FixingCam Lock Nuts

Furniture Fixing BracketsE-Nuts, D-Nuts & T-Nuts

Connecting furniture

Locking cam bolts into place

Nylon Thumbscrews

Supporting heavy furnitureAdding a thread to wooden furniture

Offers lightweight fixings to secure / finish Organising cables or holding them in position Fixing threaded components in position

Screws to fix an object in position or tighten an application

Fixings & Fasteners are stocked in a variety of threaded and non-threaded options, oen manufactured from Zinc Coated Steel, or Nylon 6/6. Designed specifically for use with a variety of Furniture & DIY uses, you can rest assured

that we have the best option for your application.

Fixings & Fasteners

P-Clips Locking Wing Nuts

D-Nuts

Furniture Connector Nuts

Cross Dowel Barrel Nuts

Cam Bolt Fixings

Funiture ConnectorBolts

Cam Lock Nuts

Cone Shaped E-Nuts T-Nuts

Fir Tree Plugs

Nylon Thumbscrews

Furniture Fixing Brackets

Nylon Screws & Bolts


Fixings & Fasteners

Fixings & Fasteners

Cross Dowel Barrel Nuts Product Code: BNUT

Furniture Connector Nuts Product Code: JCN

Furniture Connector Bolts Product Code: JCB

Cam Bolt Fixings Product Code: CAM

Nuts to increase the strength in a joint

For connecting Furniture

For connecting furniture

For pairing with cam lock nuts

Manufactured from a premium Steel Alloy

Simple to use threaded nutPerfect pairing with connector bolts

Manufactured from a strong Steel Alloy

Excellent pairing with nuts Simple screw fixing solution

Manufactured from a Zinc Plated Steel

Cross dowel adjustable headAdjustable from above

Manufactured from a cost effective Turned SteelAvailable in metric and euro thread typesReplacements for old or ineffective bolts

M6 - M8

M6 - M8

M6 - M8

34mm


Fixings & Fasteners


Fixings & Fasteners

Cone Shapes E-Nuts Product Code: MTI

D-Nuts Product Code: MTI

Furniture Fixing Brackets Product Code: ADJ

Cam Lock Nuts Product Code: CAM

Compatible with male threads

For replacing old or worn cam nuts

Rust and weathering resistant

Knock in for quick fixing

Manufactured from a premium Zinc Alloy

Locks a matching bolt in position

For locking a threaded bolt in position

Manufactured from a Zinc Finished Steel

Fixing Brackets

Brackets to fix Adjustable Feet in position

Manufactured from a strong Silver Zinc Alloy

Used with both curved/flat surfacesEasily inserted in to wood or similar

Manufactured from a high quality Zinc Alloy

Designed for use with woodGood pairing with threaded feet

16mm - 19mm

M8 - M10

M6 - M8

M4 - M10

Fixings and Fasteners

P-Clips Product Code: PCL

T-Nuts Product Code: MTI


Fir Tree Plugs Product Code: FTP

Locking Wing Nuts Product Code: WING

To organize or thread exposed wires

Suitable for wood

Barbed for security

Metric threaded

Manufactured from quality Steel AlloyFor use with threaded componentsPronged for a secure fitting

Manufactured from a strong Nylon 6/6Durable and long lasting solutionLocks panels into place

Manufactured from a high quality Nylon 6/6

Perfect for clamping cables or wiresAvailable in a Natural or Black finish

Manufactured from a premium Nylon 6/6

Locks in position for security Available in both Natural & Black

M6 - M10

3mm - 10mm

1/8” - 5/8”

M4 - M6


Fixings & Fasteners

Nylon Thumbscrews Product Code: THUM

Metric threaded

Manufactured from a strong Nylon 6/6Can be used to tighten panels Available in Black or Natural

M3 - M6

Nylon Screws & Bolts Product Code: THUM

High performance solutions

Manufactured from quality nylonRange of head and drive types

Hundreds of different size combinations

M2 - M24

Need guidance on sizing?

We have thousands of line drawings on our website which can be found on the relevant product page by

clicking on the line drawing button.

Edging Strip


Profile Material Properties

EPDM Rubber

EPDM Rubber

PVC, EPDM Rubber & Steel

PVC & Steel

‘U’ channel for easy push fit application

Square channel for box sections and square bars

Creates compressed seal to prevent leakages

Reinforced with steel ribs for added strength

We offer a vast array of Rubber Profiles for both commercial and consumer uses, manufactured from high strength, resilient materials to offer optimal properties. From generic U Profiles to custom made Door Trims with Steel

Reinforced ribs, we keep a large stock of these solutions.

Edging Strip


U-Channel Edging

Reinforced Edge Trim

Square Edging

EPDM Self Adhesive Edging

Silicone Self Adhesive Edging

Door Trim

Grommet Strips

Edging Strip


Edging Strip

Door Trim Product Code: EDGE

U-Channel Edging Product Code: EDGE

Square Edging Product Code: EDGE

Reinforced Edging Product Code: EDGE

Prevents leakage through door gaps

Protects exposed metal edges

Prevents injury

Prevents exposed metal from causing injury

Manufactured from a solid black EPDM

Versatile U-channel profile Self gripping to your object

Manufactured from a solid EPDM RubberExcellent resistance and strengthGood for protection uses

Manufactured from both EPDM & Steel

Excellent resistance against shock

Perfect for sealing door areas and surroundings

Manufactured from high end PVC with Steel ribs

Reinforced with steel for added strengthUseful inside industry / commerce

1mm - 2-4mm

3mm - 25mm

1-3mm - 2-4mm

0.8mm - 6-8mm

Edging Strip


Prevents damage to exposed panels

Insulates and protects

Manufactured from a pressurized EPDM

Strong pressure adhesive backingVersatile and resistant product

Manufactured from an expanded SiliconeHigh temperature resistant up to 315°cSilicone pressure adhesive backing

6mm - 50mmSilicone Self Adhesive Edging Product Code: SAES

EPDM Self Adhesive Edging Product Code: SAES6mm - 50mm

Edging Strip


Range of useful applications

Cut to fit lengths available

Manufactured from a PA66/6 MDS filled Nylon

Built in lubrication to reduce friction Temperature resistance -40°C to 65°C

Great for binding and framing exposed panel edgesManufactured from a high impact PolystyreneTemperature resistant -20°C to 50°C

13mm - 6.4mmPolystyrene Grommet Strip Product Code: EDGE

TPE Grommet Strip Product Code: EDGE7.6mm - 15.9mm

We hold a large variety of Edging Strip in stock, however, we also offer custom sizing where required for your specific needs.

If you require a custom profile give us a call on 01233 713 581

Or visit our website www.vital-parts.co.uk/edging



Material Properties Washers

Nylon

HDPE

Peek

TPR Rubber

LDPE

Strong, reliable, lightweight

Heat resistant up to 180°c, flame resistance - UL94 V-0

Durable, good level of resistance to chemicals

Vibration dampening, provides air tight seal

Strong, reliable

Our range of Bushes, Spacers & Washers has been developed to coveran array of industries and uses, from inside the household, to during

production of a product. Offering over 10 different styles of Washers, madeup of 6 highly resistant materials, look no further for your requirements!



Saddle Washers

Spacers & Washers Rubbber Washers

Anti-Loss Washers

Nylon Washers

Peek Washers

Headboard Washers

Finishing Washers


Bushes, Spacers & WashersBushes, Spacers & Washers

Rubber Washers Product Code: WASH

Bushes & Spacers Product Code: NYS

Nylon Washers Product Code: WASH

Anti-Loss Washers Product Code: WASH

Prevents ingress or spillage

Black or natural finish

Available in black or natural finishes

Anti-loss teeth to grip screwdriver

Manufactured form high strength Nylon 6/6Available with or without flange Great for spacing uses

Manufactured from a durable Nylon 6/6

Seals and prevents movement in mechanisms Dampens vibrations between components

Manufactured from high quality TPR Dampens vibrations and noise

Provides an air tight seal

Manufactured from premium Nylon 6/6 & HDPE

Reduces vibrations between High strength product

3mm - 50mm

M2 - M39

3.2mm - 21mm

M2 - M16



Headboard Washers Product Code: WASH

Saddle Washers Product Code: WASH

To fit 36mm outside diameter

Flame resistance: UL94 V-0

Available in 5 different styles

Available in black or natural finishes

Manufactured from premium Peek sheetingHigh specification washer solutionTemperature resistant up to 180°c

Manufactured from Black / Natural Nylon 6.6Excellent protection and insulation properties

Prevent excess movement

Manufactured from a premium LDPE Connect a headboard to a wall

Improves spacing between wall/headboard

Manufactured from a quality Nylon 6/6

Ideal for tube assembly usesSupport tubular frames / objects

M2.5 - M8

8.4mm

12-14mm - 50-60mm

Finishing Washers Product Code: FWA

Peek Washers Product Code: WASH2.7mm - 10.5mm



Gaskets & Seals are an essential product within industry, commonly used within Oil, Water & Gas related employments to protect, cover and seal pipe and fluid systems. Offered in many different materials and specifications, we supply both

custom gaskets, and standard rubber seal sizes for varied uses.

Material

Graphite

EPDM

Non Asbestos Y

SBR

Nitrile

Non Asbestos X

Resistant to...

Acids, Alkalis

Extreme Temperatures

Oils, Gases, Petroleum Fluids

Natural Gases, High Temperatures

Oils, Break Fluids, Cooling Fluids

Water, Air

Full Face / Insertion

Custom Cording O-Ring Kits

Insertion Nitrile Gaskets

Full Face EPDM Gaskets

Full Face Nitrile Gaskets

Full Face Non AsbestosX Gaskets

Full Face Graphite Gaskets

Full Face Non Asbestos Y Gaskets

Insertion EPDM Gaskets

Insertion SBR Gaskets

Rubber Cording

Full Face SBR Gaskets




Gaskets & Rubber SealsGaskets & Rubber Seals

Full Face Nitrile Gaskets Product Code: NITRILE

Full Face EPDM Gaskets Product Code: EPDM

Full Face Graphite Gaskets Product Code: GRAPHITE

Full Face Non Asbestos X Gaskets Product Code: NON ASBESTOS X

Range of pressure ratings




Excellent resistance against Acids/AlkalisHigh continuous working temperature (100°c)

Perfect for all kinds of hygienic uses

Manufactured from Reinforced Graphite Resistant against extreme temperaturesBAM & DVGW approved material

Resistant against Oils, Gases & Petroleum FluidsResistant to aromatic hydrocarbonsGood level of shore hardness

Manufactured from ground-breaking AF400 Good for uses with natural gasesHigh peak temperature of 400°c

Made to order

Made to order

Made to order

Made to order



Insertion EPDM Gaskets Product Code: EPDM

Insertion Nitrile Gaskets Product Code: NITRILE





Manufactured from medium-duty AF300

Flexible for use with irregular / uneven flangesRecommended for steam and water systems

Manufactured from a high end SBR Excellent water and air resistanceHigh level of tensile strength

Manufactured from a high quality EPDM WRAS approved for use with drinking water

Inner bolt circle type gasketing solution

Manufactured from a high end Nitrile Resistant to many chemicals/solvents

Suited for automotive industries

Made to order

Made to order

Made to order

Made to order

Full Face SBR Gaskets Product Code: SBR

Non Asbestos Y Gaskets Product Code: Non Asbestos Y


Custom Cording Product Code: CORD

Insertion SBR Gaskets Product Code: SBR

Rubber Cording Product Code: CORD

O-Ring Kits Product Code: ORI

Call to enquire on 01233 713 581


High level of general resistances

All in one Kit

Manufactured from high end SBR Excellent water & air resistanceHigh level of tensile strength

Manufactured from a solid / sponge Neoprene

Compression seal to prevent ingressBuffer to absorb vibrations and shock

Available in a range of materialsMade to requirements Custom lengths

Available in Nitrile or FPM from standard

Metric or imperial sizing stocked Ideal for sealing off an application

Made to order

3mm - 25mm

Made to order

4.1mm - 39.5mm





Gasket Specification Form

If you require a custom size Gasket, please fill out the form below with your required type and sizing, and post it to us. Alternatively, head over to www.vital-parts.co.uk/gaskets to download an electronic version of theform and email it to [email protected].

A member of our sales team will then get in contact with you.

If you have any technical drawings for your project then please send / attach them with this form.

Name / Company

Telephone No.

Gasket Type

Gasket Material

Specification

Please provide clear details around your project including any measurements and key points.

Comments

Please provide any extra details for your project, examples include quantity and lead time.

Email Address


Industrial Hardware

-

Material

Nylon

Aluminium

Stainless Steel

Duroplast

Steel

Hygienic Rust Proof Cost EffectiveLightweight

-

Our selection of Industrial Hardware Products includes many high quality solutions manufactured from materials such as Stainless Steel, Duroplast &

Reinforced Nylon. Useful for locking, positioning, clamping and operating both basic and advanced functions, we have carefully picked each product for the

properties that they provide.

*Please note that these are only a few of the properties of each material


Industrial Hardware

Bridge Handles Clamping Handles

Control Handwheels

Index Plungers

Roof Support Feet

Unistrut End Caps

Wing Screws &Knobs


Industrial HardwareIndustrial Hardware

Duroplast Bridge Handles Product Code: HAND

Aluminium Bridge Handles Product Code: HAND

Chrome Steel Bridge Handles Product Code: HAND

Nylon Bridge Handles Product Code: HAND

For installation onto industrial appliances

Provides a high end finish

Adds to the aesthetic of an appliance

Good for basic operations

Manufactured from a Matte Black Aluminium Machined threads ffor installation from belowFor use with household and industrial appliances

Manufactured from a Polished Chrome Plated SteelMachined threads for installation from belowIncludes dress rings, screws and washers

Manufactured from a Glossy Black Duroplast

Resistant to chemicals, rust and heatThreaded inserts for fixing form below

Manufactured from a resistant Glass Reinforced Nylon

Finished in an attractive Matte BlackFixed from below, cover caps included

113mm - 209mm

93mm - 245mm

140mm -185mm

120mm - 213mm


Industrial Hardware

Fixing Plate Index Plungers Product Code: IND

Lock Position Index Plungers Product Code: IND

Comes with fixing plate

Perfect for hygienic uses

Great locking / positional element

Threaded body

Manufactured from a polished form of Stainless Steel

Supplied with welded base plateMachined threads for fixing from below

Manufactured from Burnished Steel or Stainless Steel

Comes with locking notch from standardSpring loaded mechanism and threaded body

Manufactured from a Zinc Plated Steel & ThermoplasticAvailable with or without a locking rest positionGreat locking / positional element

Available in Stainless Steel or Burnished Steel Complete with impact resistant Thermoplastic Knob

Standard 90 degree locking rest position

47mm - 69mm

25mm - 31mm

21mm - 31mm

Cam Index Plungers Product Code: IND

Stainless Steel Bridge Handles Product Code: HAND220mm - 325mm



Ring Pull Index Plungers Product Code: IND

Metal Body Index Plungers Product Code: IND

Retractable Index plungers Product Code: IND

Threaded Ball Index Plungers Product Code: IND

Threaded body

Threaded body

Great for continued spaces

High load strength

Available in Stainless Steel / Zinc Plated Steel Comes with/without locking rest positionZinc plated die cast head from standard

Manufactured from a high quality AluminiumFinished in either Chrome or Black Includes locking rest position

Manufactured from Zinc Plated Steel & Stainless SteelComplete with ring pull for releaseComes with locking nut

Available in either Burnished Steel or Stainless SteelThreaded body with spring loaded bearingFor locking or catching uses

18mm - 24mm

14mm - 17mm

14mm - 30mm

1.5mm - 12mm


Industrial Hardware

Nylon Clamping Handles Product Code: HW

Stainless Steel Clamping Handles Product Code: HW

For clamping or adjusting objects

Ergonomic design for comfort

Ratchet button for rotation

For adjusting or clamping

Manufactured from a Nylon & Steel / Stainless Steel

Great for generic clamping uses Comes with matching button cap

Manufactured from a Black Coated Die Cast Zinc SteelHeavy duty option for industrial clamping usesAllen key slot for fixing in position

Manufactured from a Glass Reinforced Nylon & Steel StudComes with push button ratchet for rotation

Allen key slot for adjustment

Manufactured from a hygienic, non reactive Stainless SteelComes with push button ratchet

Allen key adjustment slot

M4 - M16

M5 - M12

M5 - M16

Metal Clamping Handles Product Code: HW

Ergonomic Clamping Handles Product Code: HWM5 - M16



Stainless Control Handwheels Product Code: HW

Steel Control Handwheels Product Code: HW

Keyway slot for ease of installation

Keyway slot for ease of installation

Manufactured from Pressed Stainless SteelGreat for manual control operations

Hygienic material properties

Manufactured from Black Pressed SteelResistant to many chemicals and acidsTo assist in manual control operations

160mm - 250mm

125mm - 250mm

Product Code: WINGWing Screws

Bulk discounts available

Manufactured from high strength, durable materialsOffered in two ergonomic designsComes with a threaded stud

M5 - M10


Industrial Hardware

Roof Support Feet Product Code: HW

TUV certified testing

Manufactured from high quality materialsCapable of supporting heavy loads up to 1,350kg

Excellent load spreading properties

Unistrut End Caps Product Code: GEN

Comes in black, white, and grey

Manufactured from low density LDPE plasticDesigned specifically for unistrut channelsSquare and rectangular sizes available

110mm - 160mm

21mm - 42mm


Knobs, Grips & Handwheels

Style 2

Style 4Style 3 Good for ‘turning’ uses such as accelorators

Slightly ribbed for added gripFinger nubs for extra grip

Ergonomic design for strengthGood for general uses

Used as replacement grips for prams and strollersFinger nubs for comfort, can be used as end stoper

Style 11Used on round bars as replacement handles

Style Properties / Used For

Style 5Style 6

Style 1

Style 7Style 8Style 9Style 10

Style 12

Used on standard round barsUsed on round bars, ribbed for shok absorbing properties

Used as lever gripsErgonomic hand design

Knobs, Grips & Handwheels are generic forms of hardware used both withinhousehold, and industrial settings. Great for adjustment, control and finishing,each product has varying properties which offer an upgrade on existing

solutions, or a high quality option during manufacturing.



Flat PVC Grips

Standard Handwheels

So TouchHandwheels

Silver Ball Knobs

Premium Handwheels

Black Ball Knobs

Square PVC GripsRound Grips

Wing Screws &Knobs

Push Fit Knobs

Control Handwheels


Knobs, Grips & HandwheelsKnobs, Grips & Handwheels

Standard Star Handwheels Product Code: HW

Standard Lobe Handwheels Product Code: HW

Standard Scalloped Handwheels Product Code: HW

Standard Triangle Handwheels Product Code: HW

To control or adjust machinery

As control knobs to adjust machinery

As handles to clamp or fasten

As handles to control a basic

Manufactured from a high end Black Nylon

Zinc plated metal threadErgonomic design

Manufactured from Nylon and Zinc Plated SteelAvailable in both male and female thread typesExcellent for machinery and appliances

Manufactured from a high end ThermoplasticLightweight and durable product

4 point 'star' design

Manufactured from a high end Black Nylon

Zinc Plated Steel thread Male / Female available

45mm

30mm - 60mm

40mm - 60mm

40mm - 60mm



So Touch Lobe Style Product Code: HW

Handwheels For Machinery Product Code: HW

Replacements to enhance grip and comfort

As handles to clamp or fasten heavy machinery

As handwheels to adjust appliances / machinery

Variety of heavy duty materials

Manufactured from a high quality Phenolic Plastic

Plated Male, Female & Through thread typesErgonomic 4 point design

Manufactured from a glossy phenolic plasticExcellent for adjusting or clampingPlated Steel insert/thread

Manufactured from a Matte Black Polypropylene

So touch Elastomer coatingBest in class for grip

Manufactured for industrial / professional uses

Keywayed and plain bore options Designed for operational functions

32mm - 60mm

28mm - 60mm

125mm - 250mm

Premium Scalloped Handwheels Product Code: HW

Premium Star Handwheels Product Code: HW32mm - 80mm


Thermoplastic Ball Knobs Product Code: HK

Aluminium Ball Knobs Product Code: HK



Stainless Steel Hand Wheels Product Code: HK

Duroplast Ball Knobs Product Code: HK

Brass or standard thread

To act as a handle or grip knob

To finish off a piece of furniture

To add aesthetics to an object

Manufactured from DIN 319 Aluminium Alloy

Provides a high end finishThreaded / Knock In styles

Manufactured from a premium Stainless Steel

Highly polished 'chrome' finishThreaded / Knock In styles

Manufactured from a quality ThermoplasticFinished in matte black from standardThreaded / Knock In styles

Manufactured from a high end DuroplastGlossy black finish from standard

Brass and standard styles

16mm - 44mm

16mm - 44mm

15mm - 50mm

16mm - 51mm



Round Grips Product Code: GRIP

Product Code: WING

Available in 12 different styles

To enhance the comfort properties of a lever

To cover a square handle or lever

Manufactured from a high quality PVC / VinylComfortable slip on grip solutionHigh gloss finish

Produced from a quality Dip Moulded PVC

Comfortable PVC Grip SolutionGlossy finish from standard

Manufactured from a dip moulded Vinyl / PVCPerfect for adding comfort to a metal bar

Push fits onto most objects

Made to order

Sizes depend on style

Square PVC Sleeves Product Code: SCAP

Flat PVC Sleeves Product Code: RCAP

Wing Knobs

Bulk discounts available

Manufactured from high strength, durable materialsOffered in two ergonomic designsComes with a threaded stud

M5 - M10

3mm - 25.4mm


Knobs, Grips & HandwheelsKnobs, Grips & Handwheels

Tee Push Fit Knobs Product Code: HW

Knurled Push Fit Knobs Product Code: HW

Rosette Push Fit Knobs Product Code: HW

Other colours upon request

Made from a high strength Acetal Thermoplastic

Three styles available (Knurled, Rosette, Tee)For installation onto a socket head cap screw



Three styles available (Knurled, Rosette, Tee)

For installation onto a socket head cap screw

M3 - M8

M6 - M10

M5 - M10



Three styles available (Knurled, Rosette, Tee)For installation onto a socket head cap screw


Pipe & Flange Protection is an essential process within many industries, especially Oil & Gas where large pipes and flanges may regularly be transported to external sites. Offering best in class properties, each product has been carefully designed to offer excellent coverage to meet your requirements.


Corrugated Flange Protectors

Pipe End Plugs

Flange Cover Caps

Stick on Flange Disc

Flange Stud Covers

Flange Cover Caps

Full Face FlangeProtectors

Pipe Caps

Pipe End Plugs



Corrugated FlangeProtectors




Flange Stud Covers Product Code: FLC

Stick On Flange Discs Product Code: FD

Full Face Flange Protectors Product Code: FFP

Corrugated Flange Protectors Product Code: FPD

Protects during storage or transport

Ideal for temporary flange protection

Prevents damage during transport/storage

Prevents damage during transit

Manufactured from Neoprene RubberResistant against Acids, Alkalis and Heat

Low-tack adhesive from standard

Manufactured from a highly durable LDPE Flexible ribs for tight fitting to the boreCovers the full face of the flange

Manufactured from a high quality LDPE

Push fits into defined bore holesPrevents excess wear/damage

Made from a high quality Polycor PlasticResistant, durable & long lasting

Protect the full face of a flange

36mm - 857.2mm

86mm - 450mm

1” - 12”

75mm - 1168.4mm



Pipe End Plugs Product Code: RPP

Plugs in the end of a tube or pipe

For covering/protection during storage

Slight flexibility for ease of installation

Manufactured from a flexible Polyethylene

Easily covers the full face of the flangeImpact and moisture resistant

Manufactured from a resistant Polyethylene Easily fits over the face and lip of a pipe

Ribbed for a tight and secure fitting

Manufactured using a hard wearing LDPEMultiple ribs to promote a secure fit

Ideal pipe protection solution

37.7mm - 1642mm

10mm - 114.3mm

Pipe Caps Product Code: PIP

Flange Cover Caps Product Code: FCC75mm - 1041.4mm

Priority Free Samples Priority Free Delivery Bulk Trade Pricing

Enjoy all these benifits when you set up a Bussiness Account with us!


Scaffold Protection

Our selection of Scaffold Protection products have been carefully chosen to adhere to Health & Safety requirements on-site. Each solution has been carefully designed, using high visibility colours and heavy duty materials to

offer a well rounded solution.

Manufactured to meet strict EN74/BS1139 Industry StandardsAdheres to BS EN 12811-1 European Standards Offered in bright and high visibility colours


Scaffold Protection

Rebar Safety Caps Scaffold End Caps

Scaffold Stud BoltCaps

Scaffold Base Plates

Scaffold Inserts

Scaffold Protection

Scaffold End Caps Product Code: SCAF

Rebar Safety Caps Product Code: SAFE


Scaffold Protection

Scaffold Base Plates Product Code: SCAF

Scaffold Inserts Product Code: RO

Prevents damage and ingress

Covers exposed poles/rebar

Heavy duty design

Quick and easy to fit product


Temperature & UV ResistantIndustry standard sizing

Manufactured from a high quality HDPE

Supports the base of scaffoldPrevents damage to the floor

Manufactured from a premium LDPE Meets health and safety guidelines

Industry standard sizing

Designed to fit perfectly into Scaffold Poles

Protects from weathering/damageAdheres to health and safety regulations

8mm - 50mm

220mm

48.3mm

47.7mm - 48.4mm


Scaffold Protection

Fits over exposed scaffold studs

Manufactured using a premium LDPE

Durable re-usable product

Meets all Health and Safety guidelines

Scaffold Stud Bolt Caps Product Code: SCAF13mm


Anti Vibration

As a manufacturer of these Anti Vibration Solutions, we are able to providea number of other premium materials across both Mount and Buffer styles.These include High Temperature Rubber and Stainless Steel, which are

available upon request.

Mounts

Washers

FeetWidely used within industrial settings, where they providean ideal level of shock absorbing and vibration dampening

properties at a low cost.

Cut into ring shaped pieces which can then be used todampen vibrations between mechanical components, or to

provide a high level compression seal.

Product Properties / Used For

BuffersDesigned to reduce excess vibrations within moving

elements or components. Compatible with both sheer andcompression forces.

Used within combustion engines, industrial machinery,transit cases, generators, and many more applications.Designed to be screwed into a threaded hole.

Tapered Rubber Feet Screw On RubberFeet

Turret Mounts

Rubber Washers

Flat Female VibrationBuffers

Tapered VibrationBuffers

Conical VibrationBuffers

Flat Male VibrationBuffers

Male - Male Mounts

Male - Female Mounts Octagonal RubberFeet

Srtaight Rubber Feet

Female - Female Mounts

Hanger Mounts


Anti Vibration


Anti VibrationAnti Vibration

Tapered Vibration Buffers Product Code: AVM

Used for both sheer and compression forces

Flat Female Vibration Buffers Product Code: AVM

Custom materials available upon request

Flat Male Vibration Buffers Product Code: AVM

Great for vibration and shock

Conical Vibration Buffers Product Code: AVM

Easily screwed onto a female thread

Manufactured from high strength materials

Level of versatilityIdeal for any shock absorbing roles

Manufactured from corrosion resistant materialsAvailable in a number of stud combinationsResistant to high temperatures

Designed with a tapered base

Manufactured from a Zinc Plated SteelMale threaded stud from standard

Manufactured from a Zinc Plated Steel

Prevents excess vibrationCommonly used with machinery

M46- M16

M3 - M16

3.8mm - 11.9mm

0.89mm - 53.47mm


Anti Vibration

Male - Female Mounts Product Code: AVM

Rubber Washers Product Code: WASH

Female - Female Mounts Product Code: AVM

Male - Male Mounts Product Code: AVM

Install onto both male and female threads

High temperature resistant

Used with both compression and shear forces

Multipurpose product

Feature a male stud on either side

Made from corrosian resistant Zinc Plated SteelAvailable in a number of stud combinations

Feature a double sided female thread

Common in industrial machineryReduce excessive vibration and shock

Paired with a natural rubberCustom materials available upon request

Great for vibration and shock

Manufactured from quality TPR rubberDampens vibrations and noiseProvides an air tight seal

M3 - M20

M4 - M20

M4 - M16

3mm - 37mm


Anti VibrationAnti Vibration

Tapered Rubber Feet Product Code: ADJ

Octagonal Rubber Feet Product Code: ADJ

Screw On Rubber Feet Product Code: SCOF

Straight Rubber Feet Product Code: ADJ

Used to stabilize and add height

Durable and resistant

Height adjustable thread

Countersunk hidden screw head area

Manufactured from a Nitrile RubberEight sided base for excellent stabilityIdeal for adding height to an application

Manufactured from a premium rubber

Excellent anti slip propertiesDesigned to dampen vibrations

Features either a steel or stainless steel threadDesigned with excellent gripping properties

For use with a range of surfaces

Made from either a natural rubber or TPR

Great durability and strengthIdeal for use with wooden furniture

M6 - M10

M6 - M12

M6 - M12

13mm - 35mm

Anti Vibration


Anti Vibration

Turret Mounts Product Code: AVM

Hanger Mounts Product Code: AVM

Rubber design prevents corrosion

Threaded for a secure mount

Manufactured from Zinc Plated Steel & RubberCompatible with multiple applications

Optimal vibration reduction

Manufactured from Zinc Plated Steel & RubberThree different shore hardness optionsFor ceiling mounted applications

M8 - M12

M6 - M10


Anti Vibration

Our Quick Step Guide to Anti-Vibration Mounts

1. Determine the total weight of the equipment and number of mountings required.

2. Calculate the weight on each mounting (Consider that weight may not be evenly distributed.

3. Determine the running speed (or forcing frequency) of the equipment.

4. Determine the static deflection of the mounting from the chart below (Generally 70% Isolation is acceptable for most applications)

5. Based on the l5. Based on the load per mounting, select a suitable mounting type to give the required static deflection, considering the specific application requirements, such as whether the equipment is Mobile or Static.

6. Ensure that all connections & services to the equipment, such as exhausts, pipework and ducting are flexible in order to allow the equipment to move freely.

Running Speed(RPM)

% Vertical Isolation Required

70% 80% 90%

10001500

3000

4.0mm 5.4mm

1.8mm 2.5mm 4.5mm

0.5m 0.7mm 1.2mm

10.0mm

01233 713 581

Based in Maidstone, Kent we keep over 1,000,000components in stock ready for next day delivery at all times, ensuring we have the product you require, when you need it.

Finding Us

www.vital-parts.co.uk

The Vital Parts Product Brochure

Documents

Transcript of The Vital Parts Product Brochure