The TIRAGE,./ TIRAGETII PLUS

PARTS CATALOG Model 18900000 Issue Data: 12193

Catalog 174060008

CONTENTS

lirage Reference

Page 1

lirage Plus Reference Discharge Plumbing mrage) Discharge Plumbing_ mraoe Plus) Suction Plumbi~ mrage and lirage Plus) Air Una Piping mrage) Air Una Piping mr~e Plus) Air Control Assembly Air Blower/Piping Assembly mrage and lirage Plus) Heater Assembly Pump/Motor Assemblies Control Panel Cover/Drain Assembly System Control Module/Plug Assemblies Subplate Assembly/Components Vent/Drain Assemblies Skirt/Step Assembly Foam Batts/Pillows/Thermometer Other Items Available

TO ORDER Order by part number unless otherwise noted. Quantities shown in this catalog Indicate the number of items required. When ordering, specify the quantity needed.

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

TIRAGE Model 18900000 Issue Date: 12/93

Repair Assemblies are shown/referenced below.

Jet# 5 Air Control Panel (2)

Jet#4

Jet#2

Jet#3

Jet#l

Control Panel

System Control Module

Discharge Plumbing ·-

Motor/Pump Assembly (1-.75HP, 1-2.0HP, used white JWB pump)

Jet#7

Water Rainbow Assemblies (2)

Control Panel Covers

Front Load Filter/Skimmer Assemblies ~

Suction Plumbing

Heater Assembly

1

Jet#8

TIRAGE PLUS Model #8900000 Issue D~te : 12/93

The lirage Plus features the following: addition of a digital thermometer; two BMH neck jets with changes to the discharge and air line plumbing; ozone dispersion fitting; two 2-position control panels; a 3-position control panel; two curved silver pillows and two straight silver pillows.

Jets 411 through #7 (HTAs)

Control Panel Covers have been removed

Digital Thermometer

3-Position Control Panel

Serial Number/Product Specification Plate behind skirt access is positioned above System Control Module.

Single Water Rainbow Assembly and single Drain Assembly

Ozone Dispersion Fitting

.---- 2-Position Control Panel(s)

~~-Jet #1 0 (BMH)

~K"'ot- Jet 419 (BMH)

Jet #8 (AMH)

See General Spa Parts Catalog for information on the following:

AM H Jet Assembly HTA Jet Assembly BMH Jet Assembly Control Panel · 2 Position Control Panel 3 Position Control Panel

Single Air Control Assembly Suction Fitting/Cover Assembly Water Rainbow"'Fill Spout Assembly Front Load Filter/Skimmer Assembly Ozone Dispersion Fitting Assembly Spa Light And Transformer Assembly

2

2" X

X

X

TIRAGE DISCHARGE PLUMBING

Model 18900000 Issue Date: 12193

(Sch. 40 PVC and Flex PVC piping, shown for reference, are not available from Jacuzzi Whirlpool Bath.)

1 1/2" Flex X 20.50"L.

X 14 .. 75"L.

2" X 2.88"L. To Whirlpool

5. 75"L.

2" X 2.50"L.

1 l/2" Fle:

X l5.50"L. L~x vs~;S"L. • To Jet

2" Flex t 8 X 24,00"~· ~~~

To Dlscharge~ ~~. ~ Plumbing ~

l l/2 " Flex 13 1 X 20. 75"L.

5.50"L.

X 2.50"L.

Apply flex PVC primer -PUmp Discharge ·

Drill 5/16" dia. through hole and tap tor 1/8 NPT (Both sides)

to tlex PVC prior to To Jet ......._ ~

cement. 6 5 bonding with flex PVC U~-~~ - 2" x 3.50"L.

To Filter 5 2" X 4. 88 11L.

To suction Plumbing (The opposite side goes to the Air Blower Piping) PUmp Discharge 2" x 8. 25"L.

ITEM 1 2 3 4 5 6

*7 8 9

10 ll 12 13 14 15 16 17

P/ N 7299000 6933000 0828000 2902000 0522000 7671000 5901000 0400000 2488000

0157000 0239000 0426000 0473000 0955000 0838000 5933000 2634000

*Drill 3/16 " dia.

DESCRIPTION Bushing, Reducing, 2" x 3/4" SPG x s Adapter , .75 Slip x FPT Tee, 2", S X S X S Flow Restrictor, 1.19 I. D. Ell, 45, 2" S X S Flow Switch, 2" Valve, 2" Check Plug, 2" Machined, 1/8 NPT Tee, Reducing, 2" x 2" x 1 1/2"

QTY 2 2 8 1 7 1 1 1

5 X S X S 4 Ell, 45, 1 1/2" S X S 1 Ell, 90, 1 1/2 " S X S 9 Ell, 90, 2", S X S 3 Bushing, Rdcg, 2" x 1 1/2" SPIG X S 1 Ell, 90, 1 1/2" Street x S 1 Coupling, 1 1/2" s x s 1 Flow Restrictor, l.OO" I. D. 1 Repair Piping Connector, 2" 2

through hole in center of c heck valve clapper

3

TIRAGE PLUS

J"Flex DISCHARGE PLUMBING x 2.75"L. (2 Places)

2 .. x 2.75 .. L.

2 •To Jet, .. Fl / , 7 - ex 2''x 2.75 .. L." x 16.50 .. L.

•To Jet #5

1 1/2" Flex x 20:50"L.

•To Jet #6

• See General Spa Parts Catalog

ITEM PJN

2 .. x 2.5o·L.

•To Whirlpool Pump Discharee

DESCRIPTION

3/4"Flex x 30.00"L.

1 B749000 Plug/Flow Switch Assembly 2 0522000 Ell, 45, 2', s X s 3 0828000 Tee, 2', S X S X S 4 2634000 Repair Piping Connector 5 7299000 Bushing, Rda~g, 2' x 3/4' SPG x S 6 2902000 Flow Restrictor, 1.19" I.D. 7 0426000 Ell, 90, 2', s X s 8 0473000 Bushing, Rda~g, 2' x 1 1/2' SPG x S 9 0239000 Ell, 90, 11/2', s X s 10 0955000 Ell, 90, 11/2' Street x Slip 11 0838000 Coupling, 1 1/2', S x S 12 0826000 Bushing, Rda~g, 2' x 1' SPG x S Fl Typ 13 0507000 Ell, 90, 1', s X s 14 8537000 Ell, Rdcng, 1' X 3/4', S X S 15 0827000 Tee, 1', S x S x S 16 2488000 Tee, Rdcng, 2' X 2' X 1 1/2', S X S X S 17 1592000 Ell, Street, 2', 90 18 0400000 Plug, 2', Machined

• 19 5901000 Valve, 2' Check 20 0157000 Ell, 45, 1 1/2', s X s 21 5933000 Flow Restrictor, 1.00' J.D.

•Drtll3116• dia. through hole in center of check valve clapper. 4

Model I 8900000 Issue Date: 12/93

QTY 1 10 5 4 1 1 3 1 9 1 1 1 2 2 1 7 1 1 1 1 1

2" X

TIRAGE TIRAGE PLUS

SUCTION PLUMBING

Model 18900000 Issue Date: 12/93

(Sch. 40 PVC and Flex PVC Piping, shown for reference, are not available from Jacuzzi Whirlpool Bath.)

2" X

2"

1 1/2" Flex X 19.25"L.

Whirlpool Pump Suction

1

To Filter/Skimmer Assembly

See General Spa Parts Catalog for Suction Cover and Filter/Skimmer information.

ITEM P/N DESCRIPTION QTY 1 0426000 Ell, 90, 2", s X S 3 2 0522000 Ell, 45, 2" 1 s X S 2 3 0828000 Tee, 2", S X S X S 2 4 2721000 Ball Valve, 2", S X S 2 5 3054000 Compression Ftng, Straight , .25 2 6 4649000 Tube, .25" 0. D. Flex Nylon x 96.00"L. 1 7 3064000 Bushing, Rdcng, 1/2 X 1/8 SPG X FPT 1 8 4330000 Check Valve, .5" 3 PSI 1 9 2902000 Flow Restrictor, 1.19 I. D. 1

10 2488000 Tee, Rdcng, 2 X 2 X 1 l/2 2 11 4657000 Hose Bibb, Tee Handle 1 12 6933000 Adapter, .75 Slip X FPT 1 13 7299000 Bushing, Reducing, 2" X 3/4" SPG X s 1 14 04 73000 Bushing, Reducing, 2" X 1 1/2" SPG X S 1 15 0449000 Cap, 1. 5" PVC, Flat End 1 16 0167000 Tee, 1 1/2" S X S X 5 1 17 0955000 El l , 90, 1 1/2" Street X Slip 1 18 0239000 Ell, 90, 1 1/2" S X S 1

5

@

TIRAGE AIR LINE PIPING

M odel 18900000 Issue Date: 12/93

(Sch. 40 PVC and Flex PVC piping, shown for reference, are not available from Jacuzzi Whirlpool Bath.)

1/2" Flex X 12.00"L.

1/2" Flex X 14.00"L.

To Air Control Valve Assembly

1/2" X 4 . 0011 L.

To

211 X 4.00"L.

To

1/2" Flex X 29.00"L.

1/2" X

To

NOTE: Apply flex PVC primer to flex PVC prior to bonding with flex PVC cement .

ITEM 1 2

P/N 0436000 045 50 00

To Air Control Valve Assembly

1/ 2" X

DESCRIPTION Ell, 90, 1/2 ", S X S Tee, 1/2", S X S X S

6

X 4 .00"L.

1/2" X

/

To

1/2" Flex X 23 . 00"L.

QTY 10

4

T Flex PVC X 13.50"L

TIRAGE PLUS Model 18900000 Issue Date: 12/93

AIR LINE PIPING

1/2" Aex P-IC • X 16.00"L

1/Z" Aex P-IC X 27.50"l.

•To Single AJr Control Assembly

j~ 1 /2' Flex PVC X 76.00"L.

f ~ ~Jet !0

10Jet -...-.._ 1/2" x 3.00"L .

•To 2-Position " Control Panel Cf

To Jet #7 ---<!)

1 /2" Flex PVC ~----------1/Z' X 4.00'L

To Jet #4

1 /2" Flex PVC X 29.00"L.

PVC To Jet~ 1/2" x 4.00"L. 1/2" Flex X 10.00"l.

1/2' Aex PVC X 23.00"L

•s.. General Spa Parts Catalog

ITEM 1 2 3

PIN 0436000 0455000 7164000

DESCRIPTION Ell, 90, 1/2", s X s Tee, 1/2", S X S X S Ell, Street, 1/2", 90

7

QTY

11 5 1

ITEM 1 1 1 1 1 2 2 2 2 2 3 4

• 5 6

PIN 8611904 8611914 8611922 8611945 8611952 9108904 9108914 9108922 9108945 9108952 1000000 7510000 8399000 7514000

TIRAGE AIR CONTROL ASSEMBLY

DESCRIPTION

Knob, Air Control, Tan Knob, Air Control, Almond Knob, Air Control, Cinnabar Knob, Air Control, Silver Knob, Air Control, Raspberry Panel, Air Control, Tan Panel, Air Control, Almond Panel, Air Control, Cinnabar Panel, Air Control, Silver Panel, Air Control, Raspberry Speed Clip, Tubular Air Control Valve Assembly 0-RingNalve Assembly Screw, Thread Cutting, PHP 114 x .38

*When Item 4 is ordered, Item 5 is included. Item 5 can be ordered separately.

8

Modal 18900000 Issue Data: 12/93

QTY

2 2 2 2 2 1 1 1 1 1 4 2 2 8

ITEM 1 2 3 4 5 6 7 8 9 10 . 11 12 13 14 15 16

TIRAGE TIRAGE PLUS Model ts900ooo

Issue Date: 12193

AIR BLOWER/PIPING ASSEMBLY

To AJr Channel Fitting

To Air Channel Fitting

Ensure top of loops are positioned as high as possible with bottoms

lie wrap shown for referenoe. Apply bead of silicone sealant to side of Blower Housing, wrap Item 16 around Blower and secure with 3 tie wraps.

of loops snug against pan. Tte wrap Blower Plumbing to Air Line.

C)-@ To Vent/Drain Assembly

~~~ (ro baclc side of Discharge 8 Plumbing Fitting) To instal c:ompressicln frtOOg. cHI 5118" cia. through hole in Item 12 .net t.p for 118 NPT.

PIN 7971000 4041832 0438000 0828000 4516000 0199000 6932832 3983832 6371832 0405000 0157000 0167000 0239000 0473000 0955000 7989000

'®

DESCRIPTION Plug/Blower Assembly, Snar:Hn Screw, Tapping, PHP. 18-32 x .75"L Clamp, Hose, tH-40 Worm Drive Type Tee, 2", S x S x S Flange, Pump, 2" Gasket. Pump Flange Bolt, Hex, Fl Thread, 511 ~ 18 x 2.00"L Washer, 5/16 Fit, Type A Pin Wd Ser Nut, Elasticlock 511 ~ 18 Current Collector Assembly Ell, 45, 1 1/2", S X S Tee, 1 1/2", S x S x S Ell, 90, 1 1/2", s X s Bushing, Rdcng,· 2" x 1 1/2", SPG x S Ell, 90, 1 1/2", Street x Slip Foam. Sonic

9

QTY 1 2 2 1 1 1 4 8 4 1 1 2 1 3 1 1

TIRAGE TIRAGE PLUS

HEATER ASSEMBLY

Model 18900000 Issue Date: 12/93

------------------------------------------~ 1

To System Control Module (Receptacle marked "HEATER,

To System Control Module (Receptacle marked rr"EMP. SAFETY SWITCH1

ITEM 1 2 3

N.S.

PIN 0408000 7972000 0407000 0149000

~

3

DESCRIPTION Plug/Heater Assembly, 6 Kw Heater Cord, 54" Plug Assembly, Hi-limit. S~ln Heater Connection Repair Kit

QTY 1 1 1 1

N.S.•Not Shown. May need to be ordered to hard-wire Item 2 to System Control Module.

10

TIRAGE TIRAGE PLUS

PUMP/MOTOR ASSEMBLIES

Model 18900000 Issue Date: 12/93

To Discharge Plumbing

To suction Plumbing

ITEM 1 1 2 2 3 3 4 5 6 7 8 9 10 11

4

PIN 8564000 8566000 2552000 2554000 0022000 7970000 0199000 4516000 3953832 4477000 3951832 3983832 4034832 3689000

To System Control Module

To Vent/Drain Assembl y

DESCRIPTION Pump Assembly, .75 HP Pump Assembly, 2.0 HP Motor, .75 HP, 115/230V, DriJ:rProof Motor, 2.0 HP, 115/230V, DriJ:rProof Plug Assy, Snaj:rln, Filter Plug Assy, Snaj:rln, Jets Gasket. Pump Flange Flange, Pump 2" Bolt, Hex 3/8-16 x 1.00"L. Bracket, Motor 1" High Bolt, Hex 5/16-18 x 1.00"L. Washer, 5/16 Fit, Type A Pin Wd SP• Nut, Locking Hd Kep Type 1/4-20 Vibration Damper

11

(Incorporates captive T-nuts for securing motor bracket)

QTY 1 1 1 1 1 1 2 1 4 1 4 4 8 4

TIRAGE TIRAGE PLUS Modelf8900000

Issue Date: 12/93

CONTROL PANEL COVER/DRAIN ASSEMBLIES

TIRABt

.. ~ @- ,, ~

Push barbed connector through grommet from top side of shell .

To Skimmer/Filter ~ Assembly

8

TIRAGE PLUS DRAIN DETAIL

ITEM PIN • 1 0023000 • 2 0021000 • 3 0016000

•• 4 5660000 •• 5 0451000 •• 6 0018000

• 7 0019000 ••• 8 C683000

*Used on lirage only.

ITo Skimmer/Filter!

/Assembly! I

TIRAGE DRAIN DETAIL

DESCRIPTION Control Panel Cover Assy, lirage Control Panel Cover Assy Fiberglass Rod, 23.75"L. Sealing Grommet Connector, Barbed, .38" Tube Tubing, Vinyl, .38" x .56" Tee, Barbed, .38" Tube x .25" MIPT Elbow, 3/8 Hose x 1/4 MPT

**Used on lirage and lirage Plus.

Do not use any sealant on Items 4 through 6.

Use ABS/PVC compatible pipe thread compound on male threads

QTY 1 1 2 2 2 2 1 1

***Used on lirage Plus only. The lirage Plus has one drain assembly only so order only single quantities for repair.

12

TIRAGE TIRAGE PLUS Model 18900000

Issue Date: 12/93

SYSTEM CONTROL MODULE/PLUG ASSEMBLIES

NOTE: Plug assemblies are color coded with the corresponding functions on the System Control Module. Do not force plugs. It mil'( be necessary to rotate plugs until they •e property inserted end seated in receptacles.

*8045000 2-PUMP SYSTEM CONTROL MODULE REPAIR ASSEMBLY

ITEM PIN DESCRIPTION QTY 1 7106000 'Timer, 7 Day, SPST 1 2 7669000 GFCJ, 20Amp 1 3 9569000 Repair Terminal Block Assy, 50 Amp 1 4 8748000 Receptacle, Fibre Optic Cable 1 5 C450000 Receptacle Assy, Hi-Limit 1 6 0183000 Receptacle Assy, Flow Switch 1 7 7984000 Receptacle Assy, Light 2 8 0040000 Receptacle Assy, Jets 1 9 C452000 Receptacle Assy, Blower 1 10 0149000 Heater Connection Repair Kit 1 11 0042000 Receptacle Assy, Filter 1 12 7975000 Plug Assy, Hi-Limit, Snap-In 1 13 7976000 Plug Assy, Flow Switch, Snap-In 1 14 7978000 Plug/Light Assy, 13Ft., Snap-In 1 15 7970000 Plug Assy, Jets, 76'L., Snap-In 1 16 7971000 Plug/Blower Assy, Snap-In 1 17 7972000 Heater Cord, 54' 1 18 7973000 Plug Assy; Filter, 36' , Snap-In 1

N.S. 7974000 Plug/Door Switch Assy, Snap-In 1

•Order by assembly number or by individual part number(sl. Plug assemblies are not included when PIN 8045000 is ordered but must be ordered individually. N.S.=Not Shown. Applies to units manufactured prior to October, 1992.

13

TIRAGE TIRAGE PLUS Model 18900000

Issue Date: 12/93

DC SUBPLATE ASSEMBLY/COMPONENTS

Shown below is the subplate component configuration for lirage units produced prior to October, 1992. Units produced after this date had the door interlock switch removed. These units and the lirage Plus use two bridge rectifiers (Item 1) and two DPDT switches (Item 3). See General Spa Parts Catalog "SYSTEM CONTROL MODULE SUBPLATEJCOMPONENTS (2-PUMP)" for lirage Plus information.

ITEM 1 2 3 4 5 6 7 8 9 10

PIN 8752000 8901000 8745000 7594000 7127832 7109000 5260000 7759000 6506000 1974000

DESCRIPTION Bridge Rectifier, 1 ,000 V Relay, 30 Amp, 110 VDC Switch, DPDT, 11 0 VDC Adjustable Thermostat, Side Shaft Screw, Thread Rolling, Hex Adapter, Control Cable 4-Function Air Switch Heat Indicator Repair Assembly Circuit Protector, 20 Amp Bonding Bar

14

1

QTY 3 3 3 1 1 1 2 1 2 1

TIRAGE TIRAGE PLUS

VENT/DRAIN ASSEMBLIES

Model 18900000 Issue Date: 12/93

J To Discharge Plumbing

~c:p ~~,~~~~ To Suction ~ Plumbing To Suction To Air Blower

----<2) Piping

To Filter Pu~

-----<3)

To Whirlpool Pump

NOTES: To install compression fittings, drill 5/16" dia. through hole in appropriate fining(s) and tap for 1/8 NPT. Apply PVC compatible pipe thread compound to male threads prior to assembly.

ITEM PIN DESCRIPTION 1 3053000 Compression Tee 2 4649000 Tube, 1/4" O.D. Flex Nylon x 96.00"l. 3 3044000 Compression Fitting, Ell 4 3054000 Compression Fitting, Straight

15

To Discharge Plumbing

QTV 1 2 2 6

/

TIRAGE TIRAGE PLUS

STEP/SKIRT ASSEMBLY

<// d r \ .

.r

ITEM PIN DESCRIPTION 1 8050000 Skirt, Flex Panel, so· x 26.63" 2 8306000 Skirt, Flex Panel, 16.13" x 26.63" 3 8051000 Skirt, Door, 24.25' x 26.38' 4 8049000 Skirt, Flex Panel, 22.56" x 26.63" 5 5303837 Screw, Drywall, #6 x 1.63

•6 6357000 Magnet/Clip Assembly 7 7404000 Wood Slat 8 7652000 Step, lirage N.S. 9144000 Repair Skirt Latch Assembly N.S. 7694833 Screw, A ShtMtl PHP #8 x 1.5'L. (For Step)

~(.£plies to Trrage 16

N. .=Not Shown

Model 18900000 Issue Date: 12/93

QTY

5 1 1 1 72 1 1ea 1 1 5

TIRAGE TIRAGE PLUS Modelt8900000

Issue Date: 12193

FOAM BA1TSJPILLOWSJTHERMOME I ER

__...-- Nut (hand-tighten ......-- only)

To Front Load Filter/Skimmer Body

DO NOT use silicone sealant

rrEM 1 2 3 4 5

*6 *7

•• a

PIN 0242000 0241000 0240000 0238000 0237000 C599945 C598945 C667000

DESCRIPTION Insert, Foam Batt, lirage Insert, Foam Batt, lirage Insert. Foam Batt. lirage Insert, Foam Batt, lirage Insert, Foam Batt, lira9.e Pillow, Curved, Two, S1lver Pillow. Straight. Two, Silver Thermometer, Digital

QTY 1 1 1 1 1 1 1 1

*These items contain two silver pillows. These items come in pairs only and cannot be ordered individually. They are also available as options. •• Applies to lirage Plus.

17

TIRAGE TIRAGE PLUS Model 18900000

Issue Date: 12193

OTHER ITEMS AVAILABLE

0840000 5010000 0020000 C598000 C599000

Heater, Gas, 151,000 BTU Heater, Gas, 50,000 BTU Spa Cover Assembly, Tirage Pillow, Straight, Two Pillow, Curved, Two

18

PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.

Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product. Jacuzzi Whirlpool Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.

JACUZZI WHIRLPOOL BATH Jacuzzi Whirlpool Bath National Headquarters ®

P.O. Drawer J, Walnut Cree~. CA 94596 (510) 938-7070 VL Customer Service: Call (510) 938-7411

Jacuzzi Whirlpool Bath Regional Offices

Western Region: 2121 No. California Blvd.,Suite 475, Walnut Creek, CA 94596 (510) 938-7070 Midwest Region: 2500 West Higgins Rd., Suite 1000, Hoffman Estates, IL 60195 (312) 882-8788

Southern Region: 2500 Park Central Blvd., Suite 86, Decatur, GA 30035 (404) 981-8222 Eastern Region: 1680 Route 23, Suite 150, Wayne, NJ 07470 (201 ) 696-7704

e 1989 Jacuzzi Whirlpool Bath 7 4060008 12/93

@ Printed on recycled paper.