The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs ›...

12
Flavio Flavio Gatti Gatti , TES III, August 17th, 06 , TES III, August 17th, 06 1 1 LOW TEMPERATURE TRANSFORMER READOUT ELECTRONICS LOW TEMPERATURE TRANSFORMER READOUT ELECTRONICS Flavio Flavio Gatti Gatti UNIVERSITY and INFN UNIVERSITY and INFN of Genoa, Italy of Genoa, Italy Luigi Luigi Parodi Parodi , Maria , Maria Ribeiro Ribeiro Gomes, Gomes, Lorenza Lorenza Ferrari, Ferrari, Riccardo Riccardo Valle, Valle, Simeone Simeone Dussoni Dussoni , Adriano , Adriano Bevilacqua Bevilacqua , , Davide Davide Bondi Bondi

Transcript of The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs ›...

Page 1: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 11

LOW TEMPERATURE TRANSFORMER READOUT ELECTRONICSLOW TEMPERATURE TRANSFORMER READOUT ELECTRONICSFlavioFlavio GattiGatti

UNIVERSITY and INFNUNIVERSITY and INFNof Genoa, Italyof Genoa, Italy

Luigi Luigi ParodiParodi, Maria , Maria RibeiroRibeiro Gomes, Gomes, LorenzaLorenza Ferrari, Ferrari, RiccardoRiccardoValle, Valle, SimeoneSimeone DussoniDussoni, Adriano , Adriano BevilacquaBevilacqua, , DavideDavide BondiBondi

Page 2: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 22

IntroductionIntroduction

After some very preliminary test presented in LTD11, we After some very preliminary test presented in LTD11, we fixed a few results on the use of transformers as fixed a few results on the use of transformers as passive elements for matching TES and conventional passive elements for matching TES and conventional electronics.electronics.

Not a new Idea (already used in the past)Not a new Idea (already used in the past)

New New --> Investigation for a very high noise performance > Investigation for a very high noise performance and for a reliable circuital solutions for TES and for a reliable circuital solutions for TES operation.operation.

Our work has been dedicated specifically to the DC Our work has been dedicated specifically to the DC operation with Voltage Bias at low frequency (10KHz).operation with Voltage Bias at low frequency (10KHz).

AC operation extension are under course (see AC operation extension are under course (see MAXMAX’’sstalk) and very Hightalk) and very High--Frequencies seems to open new Frequencies seems to open new scenarios.scenarios.

Page 3: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 33

Principle of operationPrinciple of operation

F(sF(s)= n )= n τ ωτ ω002 2 [([(ss+α)(+α)(ss+β)]+β)]−−11

ωω0 0 = = [L[LssC]C]--11 ; ; ττ = = LLpp/R/RTESTES ; M =[L; M =[LssLLpp]]1/21/2

αα = = τ ωτ ω002 2 ; β = τ ; β = τ −−11

ββ αα

Page 4: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 44

Need to work in voltage BIASNeed to work in voltage BIAS--> Z> ZTESTES > > ZZLpLpCurrent signal is transferred at frequencies < Current signal is transferred at frequencies < ββIncrease Increase ββ to cover detector bandwidth (10 KHz)to cover detector bandwidth (10 KHz)

Being Being LLpp of typical transformer for low frequencies of typical transformer for low frequencies application at level of tenths of application at level of tenths of μμHH, Z, ZTES TES = 0.1= 0.1--1 1 ΩΩ

Need of integration amplifier like HiNeed of integration amplifier like Hi--FiFi Amplifier for Amplifier for the pickthe pick--up coil signalup coil signal

ββ αα

V/IHere it works as trans-resistance

γββ αα

Here the signal is linearized

γ

Page 5: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 55

The choice of the The choice of the transformer is imposed by transformer is imposed by the noise performance of the noise performance of the amplifierthe amplifier

We used room temperature We used room temperature amplifiers with 0.6 amplifiers with 0.6 nV/VHznV/VHz

TransfTransf. gain in the range . gain in the range 300300--900 (turns ratio)900 (turns ratio)

High High μμ core and core and capability to work in capability to work in 0.10.1--4 K range.4 K range.

Transformer is on he MixTransformer is on he Mix--Chamber, few cm from TES.Chamber, few cm from TES.

Page 6: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 66

Simulated and measured Simulated and measured Transfer FunctionsTransfer Functions

-40

-20

0

20

40

60

80

1.0E+1 1.0E+2 1.0E+3 1.0E+4 1.0E+5

Input Current

Voltage Output of Transformer

Integrated Output

Page 7: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 77

TransfTransf Core selectionCore selection

CoreCore FFmaxmax300K300K FFmaxmax 77K77K θθ(77K)(77K) μμ77/77/μμ300300 μμ4/4/μμ300300 ExcExc noisenoise

Met.glassMet.glass >100Khz>100Khz >100Khz>100Khz 89.689.6 76%76% yesyes

““ >100Khz>100Khz >100Khz>100Khz 80.880.8 77%77% yesyes

““ 9.6KHz9.6KHz 19Khz19Khz 80.080.0 64%64% yesyes

MuMu--metalmetal 31 Hz31 Hz 282 Hz282 Hz 80.080.0 50%50% hugehuge

““ 20 Hz20 Hz 58 Hz58 Hz 80.080.0 73%73% hugehuge

ferriteferrite >100Khz>100Khz >100Khz>100Khz 83.083.0 8%8% yesyes

““ 57Khz57Khz >100Khz>100Khz 81.081.0 6%6% yesyes

““ >100Khz>100Khz 51Kz51Kz 80.080.0 84%84% 82%82% yesyes

spinglassspinglass 10.8Khz10.8Khz 9.63kHz9.63kHz 80.080.0 84%84% 50%50% nono

UnknownUnknown >100Khz>100Khz >100Khz>100Khz 88.488.4 99%99% smallsmall

““ >100Khz>100Khz >100Khz>100Khz 86.086.0 93%93% smallsmall

Page 8: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 88

Noise spectrum Noise spectrum

from 1 from 1 Ω Ω at Low T. at Low T. Minimum detectable Minimum detectable signal when R is signal when R is at 25mK, about 1.4 at 25mK, about 1.4 pA/VHzpA/VHz..

Page 9: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 99

In a limited In a limited region (0.5region (0.5--5Kz) the 5Kz) the current noise current noise equivalent to equivalent to the input of the input of the transformer the transformer is in is in pA/VHzpA/VHzrange.range.

Page 10: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 1010

The input noise The input noise density given by density given by

R= 1R= 1Ω Ω @ 4KHz is @ 4KHz is measured at measured at different different temperatures: it temperatures: it scales as the scales as the TT1/21/2, as expected. , as expected.

Page 11: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 1111

Dc bias will require TES working at a proper R valueDc bias will require TES working at a proper R value

The The TransfTransf. Functions along the transition suggests . Functions along the transition suggests that AC bias should be preferable (see that AC bias should be preferable (see GeleazziGeleazzi talk) talk)

Page 12: The TC: status. Flavio Gatti UNIVERSITY and INFN of Genoa ... › tes3 › pdfs › Gatti_LowTempTransformers.pdfFlavio Gatti, TES III, August 17th, 06 22 Introduction After some very

FlavioFlavio GattiGatti, TES III, August 17th, 06, TES III, August 17th, 06 1212

ConclusionsConclusions

The method of passive cold transformer readThe method of passive cold transformer read--out in out in transtrans--resistance configuration is effective (or resistance configuration is effective (or competitive in term of noise quality) in a limited competitive in term of noise quality) in a limited bandwidth (1 decade: 0.5bandwidth (1 decade: 0.5--5KHz)5KHz)

Cold passive electronics, room temperature conventional Cold passive electronics, room temperature conventional electronics.electronics.

AC bias configuration should improve the performance, AC bias configuration should improve the performance, taking the advantage of MUX capability and possibility taking the advantage of MUX capability and possibility to extent the bias frequency up to hundreds of MHz.to extent the bias frequency up to hundreds of MHz.