The Stereo

download The Stereo

of 7

Transcript of The Stereo

  • 8/12/2019 The Stereo

    1/7

  • 8/12/2019 The Stereo

    2/7

    PLAYING A AUDIO CD/MP3DISC

    1.- Press CD / DISC SKIP.

    2.- Press Z OPEN / CLOSE.

    3.- Load a disc in the tray disc with the label facing above.

    If you want to load more discs, press CD / DISC SKIP to rotate the tray disc.

    4.- Press Z OPEN / CLOSE to close the disc tray. Do not push the disc tray

    forcibly shut, and that may cause a failure operation. NX

    5.- Press to start reproduction.

  • 8/12/2019 The Stereo

    3/7

    TO SEARCH FOR A TRACK OR FILE MP3(TRACK SEARCH)

    1 Press SEARCH.

    2 (MP3 files only) Press / to select the folder you want, and then

    press ENTER or NX

    3 Press / to select the track or file you want, and then press ENTERor NX. The selected track or file begins playing. Listening to theradio.

  • 8/12/2019 The Stereo

    4/7

    USE BUTTONS ON THE REMOTE CONTROLTO PERFORM THIS OPERATION

    1 January Press TUNER / BAND several times to select the band FM orAM.

    2 For automatic scanning: Press TUNING MODE repeatedly until"AUTO" is lights in the display. 3 Then press + / -. Scanning stopsautomatically when tuned a station and then "TUNED" and "ST" (only

    for FM stereo programs) light in the viewfinder.

    4 If "TUNED" does not light and scanning does not stop, press x tostop scanning. A then perform the tuning manually.

    5 For manual tuning: Press TUNING MODE repeatedly directions until"AUTO" and "PRESET" disappear from the display.

    6 Then press + / - repeatedly to tune in the desired station.

  • 8/12/2019 The Stereo

    5/7

    TRANSFER REC 1 USB A TO USB

    1 Connect a USB device transferable to the B port, and Then connect the USBdevice to transfer to port A.

    2 Press USB / USB SELECT several times to select "USB A".

    3 To transfer high speed synchronized USB A to USB: When playback is stopped ,press PLAY MODE repeatedly in remote control to select the desired playbackmode note.

    4 If you start the transfer "ALL USB "," ALL USB SHUF "," 1 USB SHUF " and repeatplayback mode

    Playback will automatically switch to " 1 USB " .

    5 If you start the transfer "SHUF " the play mode changes automatically to "". Totransfer REC1 USB A to USB: Select the audio file want to transfer and then startplayback.

    5 Press REC TO USB B. The display will show "PUSH ENTER"

  • 8/12/2019 The Stereo

    6/7

    PLAYABLE DISCS

    AUDIO CD

    CD-R/CD-RW

    - Audio data

    - MP3 files that meet the

    standard ISO9660 Level 1/Level 2, or

    Joliet (extended format).

    notes

    MP3 (MPEG 1 Audio Layer 3) is a format

    standard defined by ISO (I nternational

    International Organization for Standardization) which

    used to compress audio data . the

    MP3 files must be MPEG 1

    Audio Layer 3 .

    The system can only play files

    MP3 with the extension " . Mp3" .

    Discs that can not be played

    CD- ROM

  • 8/12/2019 The Stereo

    7/7

    DISC PLAYER

    The disc tray does not open and the message "LOCKED" appears

    in the display.

    Consult your Sony dealer or nearest authorized Sony service.

    The disc tray does not close.

    Load the disc correctly