The Spohn + Burkhardt joystick controller products are primarily sold in heavy industries such as: ...
-
Upload
katie-andrew -
Category
Documents
-
view
243 -
download
12
Transcript of The Spohn + Burkhardt joystick controller products are primarily sold in heavy industries such as: ...
The Spohn + Burkhardt joystick controller products are primarily sold in heavy industries such as:
aluminium smelters steel mills construction mining
Industrial Joystick Controllers
Industrial joystick controllers provide control switching for various applications such as: Ports and harbours Ship loaders Stackers Reclaimers Gantry cranes Shovels Drag lines
M0N Light Duty up to 2 amps
VCS0 Light/Medium Duty up to 10 amps
VNS0 Medium/Heavy Duty up to 16 amps
VNS2 Heavy Duty AC Current up 25 amps
VNSB2 Heavy Duty DC Current up to 25 amps
SF Footswitches
Operator Chairs and Consoles
Product Information
Steps - The notches or “steps” felt when moving the joystick in any particular direction.
The “steps” of a joystick are often represented via the following numbering method. The zero “0” represents the center position of the joystick, and the numbers on either side represent the number of steps available in the joysticks travel.
E.g: 1-0-1 would represent 1 step away from center in each direction.
7-0-7 would represent 7 steps away from center in each direction.
Stepless - Refers to a contact arrangement that has no notching during its travel. A stepless arraignment is usually used in conjunction with potentiometers and encoders to allow for a smooth , linear operation.
Travel - Refers to the total movement of a joystick in a given direction. A full length travel would be defined as the movement of a particular joystick from its center position, to the limit of its movement in given direction. The full travel of a joystick is independent from the number of
steps a joystick may posses.
Motion: A one motion joystick is a joystick with one axis, that being either up-down or left-right. A two motion joystick has both axis
Contact Block - A contact block is the block in which the electrical contacts are housed. Each contact block contains two sets of contacts.
Contact System - Is a completed contact arrangement, the arrangement may consist of one or more sets of contacts blocks, cams and mounted accessories.
Drive Arrangement - The position in which the contact system is mounted.
E.g: On one of the four sides, or a combination of sides or even on the base.
Orientation - The co-ordinate system used to distinguish one direction of travel from another. There are two common orientation designations currently being used.
E.g:A
C D
B S
EW
N
VCSO Series
Compact
Potentiometer available
Variety of switch arrangements
Light Weight
VNSO Series
General industrial
Potentiometer available
Variety of switching arrangements
Strengthened alloy chassis
VNS2 Series
Heavy Duty
Potentiometer available
Spring return or stayput
VNSB2 Series
Heavy Duty DC Switching
Potentiometer available
Variety of switch arrangements
Spring return or stayput
Universal handles
Push buttons, dead man available in standard handles
Multiplexer system up to 8 pushbuttons in UG handle
Potentiometers & Encoders
Potentiometers available for all Joystick controllers
Encoders available for VCS0 & VNS0 in binary code, gray code and analogue
VNSO 2 3 F 14 NV R UG 1R 2B T PD550 10-0-10K
F - Standard Inclusion.
R - $89 x 2 (Priced per motion i.e. x 2 for a 2 motion controller)
UG - $275
VNSO - $1320 (Priced as VNSO_NV)
2 - $155 (1st contact block) + $140 (Additional contact block)
3 - $155 (1st contact block) + $140 x 2 (Additional contact block)
NV - (Priced as VNSO_NV)
14 - Standard Inclusion.
2B - $45 (blue button in pos 2)
1R - $45 (red button in pos 1)
5 - $185
PD550 10-0-10K - $590 (inc. pot mount add $89)
TOTAL : - $3457 (list price - discount applicable)
Pricing example
Portable controller stations
The Spohn + Burkhardt consoles provide a variety of options for mounting their range of joystick controllers. They also provide practical and ergonomic design to allow for the ease of use.Included in the range is the breast plate type of enclosure which allows operation of the controllers without straining their back.
FeaturesCan accommodate most joysticksAccepts pushbuttons and indicatorsErgonomically designed for comfortDouble insulated
Most operator consoles are not the same. Variations to the standard console design are required in most applications.The most common change to console is the type of chair that goes in it.
Console top width is dependant on control equipment installed. Larger controller such as type VNSO may require the FSSMD console as seen here.
Operator chairs and consoles
Spohn & Burkhardt provide detailed drawings which we use to establish which product is best suited to the application.
Chair options
Include head rest, arm rests, leather covering, adjustable lumbar support, crotch cut outs and seat belts.
360° manual or motorised rotation and pneumatic suspension
Features and benefits
Stainless steel or mild steel construction
Contoured space saving design
Fully adjustable chair
Stainless steel console tops
Technical
Rotating bearing up to 355˚ rotation
Console tops 3 mm stainless steel
Adjustable forward/back (150 mm)
Inclination (12˚)
Hydraulic vibration damping (100 mm stroke) and seat height (60 mm).
Accepts VNSO for AC supply and NSB2 joysticks for DC supply voltage.
Thank you