The Saguaro from MGI, USA The Sedona Wafer Handling & Cassette Indexer from MGI, USA 1203 West...
-
Upload
barry-russell -
Category
Documents
-
view
214 -
download
2
Transcript of The Saguaro from MGI, USA The Sedona Wafer Handling & Cassette Indexer from MGI, USA 1203 West...
The Saguaro from MGI, USA
The Sedona Wafer Handling & Cassette Indexer
from MGI, USA
1203 West Geneva Drive Tempe, Arizona USATel: 800 TEL-SERV
SEDONA WAFER HANDLING SYSTEM & CASSETTE INDEXER
Single Head System with a Dual Stage Cassette Indexer.
Dual Head System with a Four Stage Cassette Indexer.
The Sedona wafer handling system is designed to transfer wafers from MGI magazines containing wafers in a coin stack configuration, separate one wafer at a time from the stack and place the wafers into plastic cassettes. The system can also reverse the operation and move the wafers from plastic cassettes into a coin stack. This system can also be connected to a cassette indexer for continuous cassette loading. The cassette indexer can be configured to hold two, three or four cassettes. This system can also be configured with multiple vacuum heads to increase the productivity through put. If the system is configured with two vacuum head, two plastic cassettes are loaded simultaneously and if this dual head system is connected to a cassette indexer four cassettes are placed on the indexer for a higher through put.
Sedona Vacuum Series
Key System Features
Typical WPH
Single Head, single cassette system ≧600 WAFER PER HOUR
Multiple Head, multiple cassette system ≧600 up to 3600 WAFER PER HOUR
Versatile system accommodates a wide range of wafer thickness and wafer sizes.
Wafers: 125 mm X 125 mm or 156 mm X 156 mm (rectangular or pseudosquare).
Cassette platforms can easily be changed to accommodate different cassettes.
MGI Electronics supplies custom designed stackable magazines to contain up to 300 stacked wafers.
Options included:
Safety Light CurtainMulti colored light tower with audible alarmSerial Communications PortsParallel Communications PortsNetworking capabilitiesUPS – uninterruptible power supply
Warranty = 1 Year
Facility Requirements• Dimensions:• Single Head, single cassette systems.• 26” (W) X 22” (D) X 40” (H)• 66 cm (W) X 56 cm (D) X 101.6 cm (H)• Dual Head, four cassette systems.• 52” (W) X 44” (D) X 40” (H)• 132 cm (W) X 111.7 cm (D) X 101.6 cm (H)
• Weight:• Single Head, single cassette systems.• 150 lbs, 68 kg• Dual Head, four cassette systems.• 250 lbs, 113.4 kg
• System Power:• USA• 110Vac ±10%, 50/60Hz, 4 amps, single
phase• Europe / Asia• 220-240Vac ±10%, 50/60Hz, 2 amps, single
phase• Compressed Air - 85 - 100 PSI, 586 - 689
Kpa
• Temperature - 5º C (41º F) to 40º C (140º F)
• Humidity - 10% to 90% non-condensing
• Classification - ≧ Class 10 clean room