Packaged Ice Rink Systems

The Practical Solution

Typical CIMCO-LEWIS TwinPak Refrigeration System

Compressors• Open drive reciprocating

• Rotary screw

• Semi-hermetic mini-screw

• Hermetic compressors

Drive Systems• Electric drive with across the line part-wind or

auto-transformer starters

• Variable speed drives

• Heavy-duty industrial natural gas or propane engine drives

Control Systems• Relay logic control

• CIMCO-LEWIS 5000E ice temperature control system, using infra-red technology for the most accurate possible control of ice surface conditions

• Programmable logic controllers: Texas Instruments, Allen Bradley, Modicon, etc.

• Dedicated microprocessors and computerized interfaces to all leading building control systems

Refrigerants/Brine• Ammonia, R22 and new replacement

refrigerants for CFCs/HCFCs

• Calcium chloride, ethylene glycol and other proprietary fluids

Brine/Glycol Pumps• Single or multiple pumps for energy

conservation and multi-floor applications

• Underfloor heating pump

• Jacket coolant pump

Heat Exchangers• Shell and tube chillers and condensers

• Welded plate and frame chillers and condensers in stainless steel or titanium, to minimize refrigerant charge and package size

• Heat reclaim for underfloor heating, snow melting pit and potable water

• Compressor jacket heat exchangers

• Quick ice removal heat exchangers for multi-purpose arenas

Typical CIMCO-LEWIS RinkPak• Open drive compressor

• Close coupled brine pump

• Factory installed starter and control panel pre-wired to motors

• Available air or water cooled

Typical CIMCO-LEWIS TwinPak Refrigeration System• 210 TR capacity

• 3 x 100 HP reciprocating compressors

• 3 x 30 HP brine pump (1 – 100% standby)

• Underfloor heat reclaim heat exchanger

Selection Guide

CIMCO-LEWIS Packaged Ice Rink Systems

The CIMCO-LEWIS Advantage

CIMCO-LEWIS Packaged Ice Rink SystemsCIMCO is proud to be recognized as the leader in thedesign, engineering, manufacture, installation andservicing of ice rink systems.

For more than 90 years, CIMCO-LEWIS’s highly skilledprofessional rink designers have been providing reliable,cost effective solutions to our customers.

Questions on applications? Equipment selection? Plantperformance? CFC, HCFC or alternative refrigerant issues?System retrofitting or upgrading? Plant evaluations?Energy savings or heat reclaim? We can help with soundadvice and practical solutions, including CIMCO-LEWISPackaged Ice Rink Systems.

A CIMCO-LEWIS Packaged Ice Rink System offers you theadvantages of a proven engineered unit, built by skilledtradesmen in our National Board Certified manufacturingfacility. In contrast to a field built-up system, site delaysand adverse conditions can be totally eliminated, keepingyour project on time and within budget. It is CIMCO-LEWIS’s combination of refrigeration engineeringexpertise, time-tested balanced components and shopquality control that makes it possible for you to enjoy the“CIMCO-LEWIS Advantage” at competitive prices.

The knowledge CIMCO-LEWIS has gained by installingover 4,500 ice surfaces around the world is unparalleled.So “Expect the best” by contacting your CIMCO-LEWISrink expert and putting our knowledge to work for you.

Design and Installation• Designed by professionals in the field of arenas and

industrial refrigeration

• Your special requirements can be incorporated intothe design

• The latest technological advances provide thegreatest efficiency, simplicity of operation, reliabilityand lowest operating cost

• Installation and start-up is by our own team offactory experts

Rugged Construction• Full-welded structural steel bases built to industrial

standards

• Chillers and low temperature mains are insulatedwith our unique “hermetically sealed” foamed-in-place urethane and hard fiberglass jacket insulation system

Quality Components• Only industrial quality products from leading

suppliers such as York, Evapco, Frick, Mycom,Carlyle, Vilter, Bitzer, Imeco, Copeland, Alfa Lavaland CIMCO-LEWIS are used

Code Compliance• All pressure vessels and heat exchangers are built in

our National Board Certified plant

• Refrigerant piping and welding is in accordance withall applicable ASME, CSA and local codes

• The leader in ice rink design and construction, withthousands of installations worldwide from the frigidArctic to the deserts of Saudi Arabia

• In-house engineering and manufacturing of all majorpackaged components, including heat exchangers,pressure vessels and control systems

• Service technicians and expert troubleshooters trainedin all aspects of ice rink operations

• Warranty backed by CIMCO-LEWIS and ToromontIndustries, North America’s largest family ofrefrigeration engineers and contractors

The CIMCO-LEWIS Advantage

Features

Join the

4,500 Club

Our ice rink expertise is

proven in over 4,500

installations

RP Series Paks: 15 to 30 TR

MAP Series Paks 55 to 240 TR

Capacities and Typical SpecificationsCapacities and Typical Specifications

Model Refrig- Capacity Comp’r. Comp’r. Comp’r. Brine Pump Brine Pump Brine Flow Brine in Brine outNo. erant TR 1 HP 2 HP 3 HP 1 HP 2 HP USGPM ºF ºF

RP - 2 R 22 9.6 15 - - 5 - 150 22 20.2RP - 3 R 22 12.8 20 - - 5 - 225 22 20.5RP - 4 R 22 15.6 30 - - 7.5 - 300 22 20.6RP - 5 R 22 23.0 40 - - 7.5 - 360 22 20.2

NOTES: 1. Capacities are based on 1.2 Sp. Gr. calcium chloride brine.2. Brine flow rates will vary with actual rink floor configuration and pressure drop.3. All motors operate at 1750 RPM.4. Capacities are based on 95ºF condensing temperature. Consult factory for other condensing temperatures.

Capacity Brine Brine Brine Pump Brine Flow Brine BrineModel Refrig- TR @ 10ºF Comp’r. Comp’r. Comp’r. Pump Pump 3 HP Per Pump in out

No. erant ET & 90ºF CT 1 HP 2 HP 3 HP 1 HP 2 HP Standby USGPM ºF ºF

Single Compressor PaksMAP 55A Ammonia 53 75 - - 25 - - 850 19 17.2MAP 75A Ammonia 75 100 - - 25 - - 850 19 16.5

MAP 55F R22 53 75 - - 25 - - 850 19 17.2MAP 75F R22 75 100 - - 25 - - 850 19 16.5

Two Compressor PaksMAP 60A Ammonia 58 50 30 - 25 - - 850 19 17.1MAP 80A Ammonia 79 60 60 - 25 - - 850 19 16.4MAP 105A Ammonia 105 75 75 - 25 - - 900 19 15.7MAP 125A Ammonia 128 100 75 - 30 - - 1200 19 16.0MAP 140A Ammonia 144 100 100 - 40 - - 1400 19 16.1MAP 150A Ammonia 154 125 100 - 40 - - 1400 19 15.9

MAP 60F R22 59 50 30 - 25 - - 850 19 17.0MAP 80F R22 82 60 60 - 25 - - 850 19 16.3MAP 105F R22 106 75 75 - 25 - - 900 19 15.7MAP 125F R22 129 100 75 - 30 - - 1200 19 16.0MAP 140F R22 144 100 100 - 40 - - 1400 19 16.1MAP 150F R22 155 125 100 - 40 - - 1400 19 15.9

Three Compressor PaksMAP 180A Ammonia 181 100 75 75 25 25 25 900 19 16.2MAP 210A Ammonia 216 100 100 100 25 25 25 900 19 15.6MAP 240A Ammonia 237 125 125 125 30 30 30 1200 19 16.2

MAP 180F R22 181 100 75 75 25 25 25 900 19 16.2MAP 210F R22 216 100 100 100 25 25 25 900 19 15.6MAP 240F R22 238 125 125 125 30 30 30 1200 19 16.2

MODEL LENGTH WIDTH HEIGHTRP – 2 8’- 6” 4’- 0” 5’- 9”RP – 3 8’- 6” 4’- 0” 5’- 9”RP – 4 8’- 6” 4’- 0” 5’- 9”RP – 5 9’- 0” 4’- 0” 5’- 9”

Typical DimensionsTypical Dimensions

RP Series

MAP Series

AMMONIA MODEL LENGTH WIDTH HEIGHTMAP 55 13’- 9” 6’- 6” 7’- 0”MAP 75 17’- 9” 6’- 6” 7’- 0” MAP 60 16’- 0” 7’- 6” 7’- 6” MAP 80 18’- 0” 7’- 6” 7’- 6”MAP 105 21’- 0” 8’- 6” 8’- 6”MAP 125 21’- 0” 8’- 6” 8’- 6”MAP 140 22’- 0” 8’- 6” 8’- 6”MAP 150 24’- 0” 8’- 6” 8’- 6”MAP 180 29’- 6” 8’- 6” 8’- 6”MAP 210 28’- 6” 8’- 6” 8’- 6”MAP 240 29’- 6” 8’- 6” 8’- 6”

NOTE:These are typical dimensions onlyand are not to be used forconstruction. Refer to certified prints.

FREONMODEL LENGTH WIDTH HEIGHTMAP 55 13’- 9” 6’- 6” 7’- 0”MAP 75 17’- 9” 6’- 6” 7’- 0”MAP 60 16’- 0” 7’- 6” 7’- 6”MAP 80 18’- 0” 7’- 6” 7’- 6”MAP 105 24’- 0” 8’- 6” 8’- 10”MAP 125 24’- 0” 8’- 6” 8’- 10”MAP 140 25’- 0” 8’- 6” 8’- 10”MAP 150 28’- 0” 8’- 6” 8’- 10”MAP 180 32’- 0” 8’- 6” 8’- 10”MAP 210 32’- 0” 8’- 6” 8’- 10”MAP 240 32’- 0” 8’- 6” 8’- 10”

NOTE:These are typical dimensions only and are not to be used for construction. Refer to certified prints.Separate motor control centers are supplied with three compressor packages.

CIMCOThe Cold SpecialistsDesign & Engineering

Manufacturing

Components

Installation & Service

CIMCO has built its reputation by having the besttechnical sales, manufacturing and refrigerationengineers. From coast to coast, our team ofapplication specialists can draw on 90 years ofexperience to design the refrigeration and process

cooling plants that will meet your specific needs.From initial concept, through site supervision, toproject commissioning, CIMCO engineers areavailable to ensure the success of your project.

We have established our reputation by using thelatest manufacturing techniques to produce theworld’s leading refrigeration equipment. In fact,many of the products that become part of ourrefrigeration systems are manufactured by CIMCO,

such as: shell and tube heat exchangers; pressurevessels; dehumidifiers; water tanks and pumpingsets; microprocessor and relay logic control systemsand complete packaged refrigeration and processcooling systems.

At CIMCO, we ensure that every component used inour systems is chosen based on the knowledgegained from past experience. Each product iscarefully evaluated, tested and proven before itbecomes part of a CIMCO system. From the

compressor, through to the simplest control, eachunit is carefully assessed and matched withcomponents of proven dependable performance tokeep our clients and their products cool.

A key aspect of our success has been our experiencein preparation, installation, start-up and balancing ofour systems. CIMCO offers preventive maintenanceand service inspection programs with reliable,

professional follow-up service. When it comes tokeeping things cold or on ice, only CIMCO does itbetter than Mother Nature.

CIMCOREFRIGERATION

65 Villiers Street, Toronto, Ontario M5A 3S1Tel: (416) 465-7581 Fax: (416) 465-8815

St. John’s • Dartmouth • Moncton • Alma • Quebec City • Montreal • Gaspé Ottawa • Toronto • London • Windsor • Winnipeg • Regina • Saskatoon • Calgary Edmonton • Vancouver • Kelowna • Victoria • Hartford • Salt Lake City Houston • Dallas/Ft. Worth • Phoenix • Syracuse • London, UK • Beijing, PR. China

Visit our website at www.cimcorefrigeration.com