The posture pedometer cummerbund
description
Transcript of The posture pedometer cummerbund
THE POSTURE PEDOMETER CUMMERBUND
October 2012 Program Review
Team Members:Kelly HanKyle Mauer (Team Lead)Kevin Vo
Advisors:Dr. Aziz Inan (Faculty)Srija Pidaparthy (Industry)Dr. Deborah Munro (Client)Dr. Andrew Nuxoll (Instructor)
What does the Cummerbund do? Will indicate if user has bad back
posture. Will display the user’s step count.
BUT HOW, KEVIN? The design utilizes two inputs, two
outputs, and a “brain”.Flex Sensor
Pedometer Switch
Arduino Uno
Vibration Motors
Arduino LCD
Deadlines and Progress Major Milestone
Finish Functional Specification v1.0 Deadline: Oct. 5 Completed: Oct. 4
Progress Met with Srija Pidaparthy (Oct. 2) Received Arduino Uno from Dr. Hoffbeck (Oct. 7) Ordered Parts (Oct. 14) Researched Lilypad Arduino Components Pedometer Predicament
What’s a Lilypad? Lilypad Arduino is a line of components
made specifically for interfacing electronics with fabric.
Pedometer Predicament We encountered issues with interfacing a
ball and mercury tilt switch for the pedometer function. Ball switch needed 30° tilt to register a
contact. Mercury switch needed 5° tilt to register a
contact.
Our Solution… Our first idea was to replace the tilt
switch with an Arduino GPS Shield that would record the distance the user walked.
Problems Problems: The GPS would not be able to determine if the user is walking or driving. Shield is too bulky.
Final Decision Our team decided to utilize a pedometer
spring switch contact. This mechanism is powered by a 1.5v
coin battery Output is ~1.5 volts when contact is open Output is 0 volts when contact is closed
Future Milestones (Minor) Finish first draft of Design
Document Deadline: Nov. 2 Estimated finish date: Nov. 1
(Minor) Finish Design document v.95 Deadline: Nov. 9 Estimated finish date: Nov. 8
(Major) Interface Flex Sensor Deadline: Nov. 14 Estimated finish date: Nov. 14
Future Milestones cont. (Major) Complete Design Document
Deadline: Nov. 16 Estimated finish date: Nov. 15
(Minor) Final Budget Calculated Deadline: Nov. 16 Estimated finish date: Nov. 15
(Major) Implement Pedometer with Arduino Deadline: Nov. 30 Estimated finish date: Nov. 30
Team Concerns Make sure the flex sensor contours with
the back. We want to make sure that the sensor
detects a change in back posture effectively.
Interfacing inputs and outputs with Arduino We still have not had much experience with
Arduino hardware and software
Plans for Progress To make sure we complete our
milestones we will start early on documents, testing, and continue to research Arduino hardware and software.
Our Plan Interface Flex Sensor with Arduino Interface Pedometer with Arduino Determine Cummerbund Fabric
References http://
arduino.cc/en/Main/ArduinoBoardUno http://
www.arduino.cc/en/Main/ArduinoBoardLilyPad
https://www.sparkfun.com/products/11285
https://www.sparkfun.com/products/8606