THE NATURAL WAY TO CREATE AN IMPLANT · The Swiss Implant Rootform system for dental implants was...
Transcript of THE NATURAL WAY TO CREATE AN IMPLANT · The Swiss Implant Rootform system for dental implants was...
THE NATURAL WAY TO CREATE AN IMPLANT
SWISS IMPLANTS, INC.
The Swiss Implant Rootform system fordental implants was developed by a dentistwith over twenty-five years of experiencein implant dentistry. The system was bornfrom the needs of general dentistry to treatdifferent restorative situations withbeneficial outcomes. The recognizableneeds are patient, staff, and doctorsatisfaction. General dentistry is primarilyconcerned with restoration. In the case ofmissing teeth, traditional dentistry hasoffered replacement by asking adjacentteeth to share the load and consequentstress. As a mature science, implantdentistry now offers a true reconstrucivealternative without additional burden beingplaced upon adjoining teeth.
The Swiss RootForm system offersleading edge manufacturing, packaging,delivery methods and aids. This systemhas superior solutions for hard and softtissues from a design standpoint. Minimumtooling and intrumentation is required.This compact system elegantly performseverything a general dentist needs tobecome an active participant with theirchosen surgical partner.
The implant bodies include two designsfor different surgical situations. TheSpiraltite thread is curved and spiraleddown the body, much the way bone actuallygrows, eliminating stress areas caused bytraditional sharp thread. The BoneLockimplant utilizes the curved left handedthread, but adds a small right handedthread outside the body. This self tappingdevice offers immediate engagementwithout a complicated tapping procedure,yet is small enough that destructive stressrisors are avoided.
These curves closely emulate theproportional spirals ubiquitous in nature.Each shape reveals its mathematicalbeauty in the measurements described inthe Golden Triangle of Pythagorus witheach segment related by the smaller to thelarger and the larger to the whole in theratio of 1.618.
The first implant system presenting simplicity, versatility andsophistication to the surgeon and the restorative dentist.
INTRODUCING THE CURVES OF LIFE
® ®
®
®
All implants are HA coated and supported by the historically provenagreement that a bone bond is formed more quickly and completely.The Bonelock implant also offers an alternative TPS coating.
Where locking threads arenot needed or desired, the
Spiraltite design maximizesusable surface area andallows increased seating
tightness by releasinghydraulic pressure
through the helical groovesallowing bone growth in a
natural helical form.
The Bonelock implant isthe first hybrid implant,combining the ease andusable surface area of theleft hand spiral groove withthe self-tapping external righthand thread. Displaced boneis moved directly into into thiscounter groove.
SPIRALTITE IMPLANTSPATENTED
BONELOCK IMPLANTSPATENTED
NATURALLY SUPERIOR ROOTFORM IMPLANT®
FE LOAD PLOTBONE APPOSITION IN GROOVES
This electron microscopic photograph ofbone apposition in a curved surface of animplant demonstrates maximum affinity forthis shape.
This computer model of the Bonelock implantunder compression loads illustrates the non-stressing affect of the external thread anddemonstrates that force concentration isfocused where it can offer maximumdeformation resistance.
®
®
® ®
ROOTFORM FLAT TOP ABUTMENTS
Designed primarily for bar connector over-dentures, the Flat Top implantsaccomodate implants connected togethor. There is a polished periodontalcollar of two millimeters to allow for supra alveolar placement. The hourglass abutments allow the periodontal ligament to fit more tightly andcomfortably, effectively reducing foreign body invasion.
Prepable Abutment3.3 and 3.8 diameter
Bar Tissue Abutment 3.3 and 3.8diameter 3mm and 4mm height
Abutments includeFixation Screw
Stadard six pointbase connector
Twelve point base connectorallows for 6 extra positionsto fit additional situations
SINGLE TOOTHREPLACEMENTS
OVER-DENTUREBAR CONNECTOR
ON TISSUE ABUTMENTS
The Hex Top implants offer anti-rotation comparable with the industryleader. These are suitable for single or multiple restorations. Theabutments have tissue collars that are anatomically shaped for anteriorand posterior tissue contours. There are twelve points of rotation on theangled abutments for more alternative positioning. For the need tofabricate custom abutments and connector, pattern pieces are availablefor all implants.
ROOTFORM HEX TOP ABUTMENTSFor cemented crown and bridge restoration
ROOTFORM PROSTHETIC SYSTEM®
Straight Abutment3.3 and 4.0 diameter
12mm height
25º Angled Abutment3.3 and 4.0 diameter
12mm height
15º Angled Abutment3.3 and 4.0 diameter
12mm height
15º Anterior Abutment3.3 and 4.0 diameter
10mm height
®
®
NATURALLY VERSATILE PRODUCT SELECTION
SPIRALTITE IN FLAT TOP& HEX TOP IMPLANTS
The Spiraltite Flat Top and Hex Top implants and theBonelock Flat Top implants are delivered by thepackaging stopper adapted to the cover screw. Packagecolor coding is consistent throughout for implant diameterand connector types. Red and gray denote flat tops,while blue and green designate the hex tops.
BONELOCK IN FLAT TOP& HEX TOP IMPLANTS
The Bonelock Hex Top implants are packaged with animmediate transfer assembly. This assembly acts as theinsertion tool and can be connected to a hand wrenchor latch socket driver. These are color coordinated fordiameter, green for 3.3 mm and blue for 4.0 mm. Thecover screw is housed beneath the stopper label.
®
®
3.3 MM FLAT TOP�IMPLANTS & ABUTMENTS
®SPIRALTITE
PART# SIZEHA Coated
1310H 3.3 x 10
1312H 3.3 x 12
1314H 3.3 x 14
1316H 3.3 x 16
®BONELOCK
PART# SIZEHA Coated
3310H 3.3 x 10
3312H 3.3 x 12
3314H 3.3 x 14
3316H 3.3 x 16
6300
Flat TopAbutment Screw
* Quantity Pricing is Available
72303.3 & 3.8 mm
Flat TopTransfer Pin
4/pkg
6580
Flat TopImplant Analog
4/pkg
4/pkg
3.3 x 3 mm1323
3.3 x 5 mm1325 1327
3.3 x 7 mm
Healing Abutments
1344
BarAbutment
3.3 x 4 mm1343
BarAbutment
3.3 x 3 mm1330
Direct PrepableAbutment
3.3 mm6130
Custom TissueAbutment
Pattern
3.3 mm6000
BarAbutment
Pattern Piece4/pkg4/pkg
6800
Bar AttachmentScrew
3.3 & 3.8 mm
4/pkg
1850
Bar AbutmentCap4/pkg
Part #
Part #
Part #
3.3 & 3.8 mm
3.3 & 3.8 mm
3.3 & 3.8 mm 3.3 & 3.8 mm
3.8 MM FLAT TOP�IMPLANTS & ABUTMENTS
®SPIRALTITE
PART# SIZEHA Coated
1810H 3.8 x 10
1812H 3.8 x 12
1814H 3.8 x 14
1816H 3.8 x 16
®BONELOCK
PART# SIZEHA Coated
3810H 3.8 x 10
3812H 3.8 x 12
3814H 3.8 x 14
3816H 3.8 x 16
6300
Flat TopAbutment Screw
* Quantity Pricing is Available
7230
Flat TopTransfer Pin
4/pkg
6580
Flat TopImplant Analog
4/pkg
4/pkg
3.8 x 3 mm1823
3.8 x 5 mm1825 1827
3.8 x 7 mm
Healing Abutments
1844
BarAbutment
3.8 x 4 mm1843
BarAbutment
3.8 x 3 mm1830
Direct PrepableAbutment
3.8 mm6180
Custom TissueAbutment
Pattern
3.8 mm6000
BarAbutment
Pattern Piece4/pkg4/pkg
6800
Bar AttachmentScrew
3.3 & 3.8 mm
4/pkg
1850
Bar AbutmentCap4/pkg
3.3 & 3.8 mm
Part #
Part #
Part #
3.3 & 3.8 mm 3.3 & 3.8 mm
3.3 & 3.8 mm
3.3 & 3.8 mm
3.3 MM HEX TOP�IMPLANTS & ABUTMENTS
®BONELOCK
PART# SIZEHA Coated
4310H 3.3 x 10
4312H 3.3 x 12
4314H 3.3 x 14
4316H 3.3 x 16
4318H 3.3 x 18
®BONELOCK
PART# SIZETPS Coated
4310T 3.3 x 10
4312T 3.3 x 12
4314T 3.3 x 14
4316T 3.3 x 16
4318T 3.3 x 18
®SPIRALTITE
PART# SIZEHA Coated
2310H 3.3 x 10
2312H 3.3 x 12
2314H 3.3 x 14
2316H 3.3 x 16
2318H 3.3 x 18
2317
Anterior AngledAbutment
2325
AngledAbutment
6230
Hex CustomAbutment Pattern
2333
Fixation Screw
2300
StraightAbutment
2315
AngledAbutment
* Quantity Pricing is Available
73003.3 mm
TransferAssembly
4/pkg
6530
HexImplant Analog
3.3 mm
4/pkg
3.3 mm 3.3 mm 15 Degree 3.3 mm 15 Degree 3.3 mm 25 Degree
w/Fixation Screw w/Fixation Screw w/Fixation Screw w/Fixation Screw
3.3 mm
4/pkg4/pkg
3.3 x 3 mm2330
3.3 x 5 mm2350 2370
3.3 x 7 mm
Healing Abutments
Part #
Part #
Part #3.3 mm
®BONELOCK
PART# SIZEHA Coated
4410H 4.0 x 10
4412H 4.0 x 12
4414H 4.0 x 14
4416H 4.0 x 16
4418H 4.0 x 18
®BONELOCK
PART# SIZETPS Coated
4410T 4.0 x 10
4412T 4.0 x 12
4414T 4.0 x 14
4416T 4.0 x 16
4418T 4.0 x 18
®SPIRALTITE
PART# SIZEHA Coated
2410H 4.0 x 10
2412H 4.0 x 12
2414H 4.0 x 14
2416H 4.0 x 16
2418H 4.0 x 18
4.0 MM HEX TOP�IMPLANTS & ABUTMENTS
2417
Anterior AngledAbutment
2425
AngledAbutment
6240
Hex CustomAbutment Pattern
2444
Fixation Screw
2400
StraightAbutment
2415
AngledAbutment
* Quantity Pricing is Available
74004.0 mm
TransferAssembly
4/pkg
6540
HexImplant Analog
4.0 mm
4/pkg
4.0 mm 4.0 mm 15 Degree 4.0 mm 15 Degree 4.0 mm 25 Degree
w/Fixation Screw w/Fixation Screw w/Fixation Screw w/Fixation Screw
4.0 mm
4/pkg4/pkg
4.0 x 3 mm2430
4.0 x 5 mm2450 2470
4.0 x 7 mm
Healing Abutments
Part #
Part #
Part #4.0 mm
• Tri-Spade design increases cutting efficiency by 33%.• “True” osteotomy due to single piece construction.• Electro-polishing lowers the coeffient of friction reducing heat generation.• Color coded diameter increments.
PARTDESCRIPTION
PARTNUMBER
RETAILCOST
TRI-SPADE DRILLS
Locator Drill (Site Prep)
Preliminary in Graduated Sizes -Yellow
Preliminary in Graduated Sizes -Red
Preliminary in Graduated Sizes -Light Blue
Final Drill - 3.3 mm Spiraltite -Green
Final Drill - 3.3 mm Bonelock -Black
Final Drill - 3.8 Bonelock or4.0 Spiraltite -Orange
Final Drill - 4.0 mm Bonelock -Dark Blue
7181
7110
7120
7130
7140
7150
7160
7170
SURGICAL KIT
Seating Driver (Latch)
Hex Core Driver
Drill Extender
Trial Pin
3.3 mm Depth Pin
3.8 mm Depth Pin
Hand Socket Wrench
1.3 mm Hex Driver Short
Socket Driver
Surgical Placement Tapper
Organizer Box
PARTDESCRIPTION
PARTNUMBER
RETAILCOST
7000
7010
7020
7500
7530
7580
7600
7613
7700
7710
8000
10 mm12 mm14 mm
Call
for
Prices
Call
for
Prices
SURGICAL INSTRUMENTS
EASY TO USE
Prosthetic parts designed for traditional crown and bridge restorations.Connectors for fixed and removable prosthetics are compatible with the leadingmanufacturer's threads, wrenches and driversDelivery instrumentation, both surgical and prosthetic, compatible with leading systemCompact and simple delivery kits due to technical advances in designVersatile and complete - hex and flat top, single and double helix body design, HAand TPS coatings, fixed and removable prosthetic components
••
•••
•
TECHNICALLY ADVANCED
Biocompatible design - patented double helix utilizes the Golden Proportion ratioof 1.618 to load supporting bone. This law of nature is mimicked in the pitch lengthand curved surface shape of the Spiraltite and Bonelock implant bodies.Self tapping placement - no bone taps or countersinks neededHydraulic pressure release with patented Bonelock double helixOutstanding surface area without destructive stress risersImmediate loading capabilities of outer long pitched locking thread, pulls implantbody into secure positionSolves more problems with fewer parts because of versatile abutmentsLong pitched implant thread provides a stable base allowing short pitched threadattachment immediately, with movementSurface contours conducive to GBR repairHA and TPS coating choices always on blasted surfaces
•
••
•
•
•
•
Superior quality with significant cost savingsMinimal inventory requirements - fewer partsRapid placement - self tapping feature reduces chairside time increasing productivityTotal restoration time reducedDelivery system, both surgical and prosthetic, compatible with leading systemsReduced initial investment requirements•
COST APPROPRIATE
•
••
••
THE SWISS ROOTFORM ADVANTAGES®
SHOWING ROTATION OFBONELOCK IMPLANTS®
•
PRODUCT SUPPORT
• Education
• Training
• Laboratory
We don't make everything you''ll ever need -just what you'll really need every day!
MANUFACTURINGSwiss implants products are machined from Titanium Alloy (Ti-6AL-4V)in a state of the art facility using the newest medical/dental technology.
COATINGOur implants are all coated with Hydroxylapatite or Titanium Plasma Spray.Each have become standards of the orthopedic and dental implant industries.The device to bone integrating advantages they provide are well definedwithin the latest dental and medical literature.
SIMPLICITY AND VERSATILITYThe Swiss Implant System is designed with a minimum number of parts;the primary components needed to provide outstanding longterm restorations.Vast arrays of surgical and prosthetic instrumentation are no longer neededwith the Swiss system.
QUALITYConsistency and repeatability are paramount in producing close tolerancemedical products for the 21st century. Computer controlled manufacturingstations operated by highly skilled technicians produce products thatsurpass the standards established for the dental implant profession.
CLEANING AND STERILIZATIONCleaning and quality control inspections occur at repeated steps along themanufacturing process. Each implant package is sterilized using the gammaradiation process, a form of pure energy that is generally characterized byits deep penetration and low dose rates, effectively eliminating anymicroorganisms by attacking the DNA molecule with minimal temperatureeffect. Gamma radiation is a penetrating sterilant. No area of the product,its components, or packaging is left with uncertain sterility after treatment.
CREATING THE NATURAL SUPERIOR PRODUCT
SWISS IMPLANTS, INC.(800) 549-50004420 South Broad Street - Building FSan Luis Obispo, CA 93401
•
•
•
•
•