THE LEADER IN HOSE SYSTEMS TECHNOLOGYcampbellfittings.com/pdfs/Campbell-Fittings-Catalog.pdf ·...

2017

THE LEADER IN HOSE SYSTEMS TECHNOLOGY

NEW!

• Combination Nipples• Menders• TOE Nipples• Reducing Nipples• Suction Hose Couplings• NST Suction Hose Couplings• Ball & Socket Couplings• Strainers• Foot Valves

• Band Clamps• Worm Gear Clamps• T-Bolt Clamps• Double Bolt Clamps• Spiral Clamps

• Barbed Insert Fittings• Brass Push-on Fittings• Garden Hose Couplings• Brass Ferrules

• Ferrules (standard length)• Ferrules (206/frac)• Ferrules (long)• Ferrules (light duty)• Sleeves (standard length)• Sleeves (short)

• ChemJoint™ Couplings• ChemJoint™ Male Stems• ChemJoint™

Weld-on Couplings• ChemJoint™ Unions

• Viton® Seal Ground JointCouplings

• Viton® Seal Crimped SteamCouplings

• HeatWave Couplings• Interlocking Male Stems• Air Hammer Couplings• Interlocking U-Bolt Clamps• Whip Check Safety Cables

• Universal Couplings• UniversaLock™ Couplings• Nitrogen Couplings• Single-Lock Couplings• Double-Lock Couplings

• Campbell Cobra™Cam & Groove Couplings

• Standard Cobra™Cam & Groove Couplings

• Crimpnology Nipples• FRAC-16C• Male Swivels• 206 Hose Union• Flanges• Turnback Flanges

Sanitary Fittings for Food & Beverage• Tri-Clamp Couplings• Machined Ferrules• PCT Couplings (Wine)• Wine Ferrules

PAGES 3-8A

PAGES 9-12B

PAGES 13-20C

PAGES 21-26D

PAGES 27-32E

PAGES 33-36F

PAGES 37-40G

PAGES 41-48H

PAGES 49-54I

PAGES 55-61J

Campbell Fittings

NEW!

NEW!

Sanitary Fittings for Food & Beverage• Tri-Clamp Couplings• Machined Ferrules• PCT Couplings (Wine)• Wine Ferrules

Campbell Coupling Selection GuideFrom the Selection Guide below, choose an appropriate coupling based on the hose type and application working pressure.Hose construction will affect the working pressure of a hose system. The following chart outlines the maximum working pressure of each Campbell coupling based on the type and size of hose used, as well as the attachment, and identifies the Campbell catalog section in which the coupling can be found.

A

B

C

D

E

F

G

Fitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10 12Combination Nipple Short Sleeve Rubber 400 350 300 275 250 225 225 225 175 175 150 125 100

Combination Nipple Short Sleeve Chemical 200 200 200 140 130 120 110 100 50 - - - -

Combination Nipple Short Sleeve PVC 150 125 100 90 85 65 60 55 40 30 20 - -

Suction Coupling Short Sleeve Rubber - - - 275 250 225 210 200 175 150 100 - -

Suction Coupling Short Sleeve PVC - - - 90 85 65 60 55 40 30 20 - -

Ball & Socket Coupling 3,6 Short Sleeve Rubber - - - - - 300 - 250 225 140 60 - -

Ball & Socket Coupling 3,6 Short Sleeve PVC - - - - - 170 - 140 100 80 50 - -

Crimpnology Nipple Ferrule Chem/Rubber - - 500 350 325 300 275 250 250 225 175 - -

Crimpnology Nipple Ferrule Soft - - 200 175 150 150 125 100 75 50 20 - -

Long Crimpnology Nipple Long Ferrule Rubber - - - - 1000 1000 650 600 500 - - - -

Crimpnology Nipple Swivel Ferrule Chem/Rubber - 500 500 - - - - - - - - - -

Long Crimpnology Nipple Swivel Long Ferrule Chem/Rubber - - - 500 500 500 - - - - - - -

Crimpnology Flange (steel) 4 Ferrule Chem/Rubber - - - - 285 285 275 250 250 225 175 - -

Crimpnology Flange (ss) 4 Ferrule Chem/Rubber - - - - 230 230 230 230 230 225 - - -

FRAC-16C Frac Ferrule Rubber - - - - - - - - 400 - - - -

206 Hose Union (forged steel) Frac Ferrule Rubber - - - - - - - - 400 - - - -

Campbell Cobra SS C&G 5 Ferrule Chem/Rubber - - 250 - 250 250 150 150 125 - - - -

Campbell Cobra AL C&G 5 Ferrule Chem/Rubber - - - - 250 200 150 125 75 call - - -Viton Ground Joint/

Air Hammer/Male Stem U-Bolt Clamp Rubber/Steam 1500 1250 1250 1250 1250 1250 800 500 500 - - - -

Viton Ground Joint Cplg/Male Stem Staked-on Ferrule Steam 1250 1250 1250 - - call - call - - - - -Viton Ground Joint/

Air Hammer/Male Stem Long Ferrule Rubber 1000 1000 1000 1000 1000 1000 650 500 500 - - - -

HeatWave Coupling/HW Male Staked-on Ferrule Rubber - - - - - call - call - - - - -

UniversaLock 6 Ferrule Air 300 300 300 - - - - - - - - - -

Universal 6 Ferrule Air 150 150 150 - - - - - - - - - -

Single-Lock Cplg 6 Ferrule Air 300 300 300 - - - - - - - - - -

Double-Lock Cplg 6 Ferrule Air 300 300 300 - - - - - - - - - -

ChemJoint/Male Stem Ferrule Chemical 350 400 450 325 250 250 225 225 200 - - - -

ChemJoint/Male Stem Ferrule Rubber 350 400 450 425 400 350 325 300 250 - - - -

Tri-Clamp Ferrule Sanitary - - 500 - 450 350 325 300 - - - - -

Tri-Clamp Mach. Ferrule Sanitary - - 500 - 500 400 375 350 - - - - -

Wine Fitting Ferrule Sanitary - - - - 450 350 - 300 - - - - -

Wine Fitting Band Clamps Sanitary - - - - 100 100 - 50 - - - - -

Hose System Components Hose SizeMAX. SYSTEM WORKING PRESSURE (PSI @ 70°F)

1) For normal fluids (not hazardous, combustible, flammable, volatile, corrosive, ammonia or LPG). Individual testing should be employed for non-normal fluids to ensure capability. Pressures shown are only valid for the fitting/coupling/attachment and hose combinations indicated and for their threaded mating parts. System working pressure does not include end pull forces. Not for plastic fittings/couplings. All hose systems must be assembled using Campbell procedures and crimp specifications. See elevated temperature derating chart above. Consult factory for reduced temperatures. Never exceed the working pressure of the lowest rated component in the hose system. Maximum working pressure includes the highest pressure the system will experience, such as spikes, surges, and water hammer effects. (For example: If a system consists of a hose rated to 150 PSI and the couplings are rated to 500 PSI, the system should never be used in excess of 150 PSI.)

2) Hose descriptions: Air - any smooth bore rubber air or water hose. Includes most general purpose hose; Chemical – any smooth bore rubber chemical hose, including plastic lined (PTFE, UHMW, XLPE). Does not include soft tube hose; PVC – any smooth bore PVC or vinyl hose; Rubber – any smooth bore rubber hose except steam, hot tar & asphalt, chemical, and soft tube hose; Soft – any smooth bore rubber hose with a thick, soft tube. Usually gum rubber and some food-grade hose; Steam – includes hot tar and asphalt; Sanitary – includes any food-grade hose

3) Ball & Socket pressure ratings are based on 1.5x WP.

4) Due to limitations with flanges, consult factory for tem-peratures other than 70°F.

5) Campbell COBRA Cam & Groove Couplings are identified by the name “Campbell” on the body, by the ferrule interlock groove, and by the part number, which includes a “C” suffix. Not for air or gas service.

6) Maximum temperature 160°F.

* System temperature is affected by both the media and the environment.

Steam, Hot Tar, Asphal t 1.00 0.95 0.81 0.68 0.56 0.44 0.32 0.20 0.08 N/R

PVC 1.00 0.82 0.30 N/R N/R N/R N/R N/R N/R N/R

All other 1.00 0.91 0.64 0.42 0.20 N/R N/R N/R N/R N/R

No hose: weld-on or union 1.00 1.00 0.97 0.95 0.92 0.89 0.86 0.84 0.81 N/R

HOSE SYSTEM PRESSURE DERATING MULTIPLIERS FOR ELEVATED TEMPERATURES (°F)*

Hose Type 70° 90° 150° 200° 250° 300° 350° 400° 450° 500°

N/R means NOT RECOMMENDED!

1

2

HYDROSTATIC TEST REPORT Hose Fuel drop: 3" ContiTech (GY) Infinity r ated to 100 psi. Couplings Cam & Groove: 3” Campbell Cobra aluminum C x E - coupling/sleeve system rated to 75 psi. WPAttachmentCrimped: Aluminum SleevesGoalBurst hose beyond 400 psi. (hose WP of 100 psi. @ 4 to 1 Safety Factor)ResultsHose burst at 508 psi. (system exceeded 4x WP)

HYDROSTATIC TEST REPORT Hose Oilfield: 4" ContiTech (GY) FRAC Blender Hose r ated to 400 psi. Couplings Crimpnology Nipple: 4” FRAC-16 both ends* - fitting/ferrule system rated to 400 psi WPAttachmentCrimped: Campbell Fr ac Fer rules, Plated SteelGoalBurst hose beyond 1600 psi. (hose WP of 400 psi. @ 4 to 1 Safety Factor)ResultsHose burst at 1715 psi. (system exceeded 4x WP)

* NOTE: similar successful r esults have been achieved with the Campbell “one-piece” 206 union manufactured with the same hose shank design for the same application.

HYDROSTATIC TEST REPORT Hose High pressure air: 2" Dayco Wildcatter r ated to 3000 psi.* Couplings Ground Joint: 2” Campbell Viton® Seal female x male - coupling/ferrule system rated to 1000 psi. WPAttachmentCrimped: Steel Long Fer rulesGoalEstablish the limits of the coupling/ferrule system, performed with the wing nut tightened only by hand. *NOTE: Campbell system is only rated to 1000 psi.ResultsHose burst at 9500 psi. (couplings exceeded WP by more than 9x WP)

HYDROSTATIC TEST REPORT Hose Chemical: 2" ContiTech (GY) XLPE r ated to 150 psi. Couplings ChemJoint®: 2” male x female - coupling/ferrule system rated to 250 psi. WP (swivel nut tightened by hand)AttachmentCrimped: Stainless Steel Fer rulesGoal Burst hose beyond 600 psi. (hose WP of 150 psi. @ 4 to 1 Safety Factor) Results: Hose burst at 1426 psi. (system exceeded 4x WP)

HYDROSTATIC TEST REPORT Hose Layflat: 1-1/2" Kuriyama rated to 75 psi. Couplings Aluminum pin-lug: 1-1/2” Campbell male x female - coupling/sleeve system rated to 150 psi.AttachmentCrimped: Carbon Steel SleevesGoal Burst hose beyond 225 psi. (hose WP of 75 psi. @ 3 to 1 Safety Factor)ResultsHose burst at 228 psi. (system exceeded 3x WP)

HYDROSTATIC TEST REPORT Hose High pressure air: 3” Boston Bulldog Gold HP Air Hose rated to 600 psi. Couplings Ground Joint/Male Stem: 3” Heat Wave® male stem on both ends -coupling/ferrule system rated to 600 psi WPAttachmentCrimped: Staked-on Fer ruleGoal Burst hose beyond 2400 psi. at 200°F (hose WP of 600 psi. @ 4 to 1Safety Factor) Results Hose burst at 3539 psi. at 200°F (system exceeded 4x WP)

HYDROSTATIC TEST REPORT Hose Frac: 4” ContiTech Oilfield Fracturing Hose rated to 400 psi. Couplings 206 Hose Union: Male x female Campbell 206 hose union rated to 400 psi. Attachment Crimped: Campbell Fr ac Fer rules, Plated SteelGoal Burst hose beyond 1600 psi. (hose WP of 400 psi. @ 4 to 1 Safety Factor) Results Hose burst at 1879 psi. (system exceeded 4x WP)

HYDROSTATIC TEST REPORT Hose Sanitary: 1-1/2” Continental Purple Snake rated to 232 psi. Couplings Sanitary: 1-1/2” Tri-Clamp -fitting/ferrule system rated to 450 psi. WPAttachmentCrimped: Stainless Steel Fer rulesGoal Burst hose beyond 928 psi. (hose WP of 232 psi. @ 4 to 1 Safety Factor)Results Hose burst at 2198 psi. (system exceeded 9.5x WP)

Abbreviated Reports and ResultsCampbell engineering has conducted nearly 1,000 hydrostatic tests. The following are results from several popular products. Please contact our customer support team to receive test reports on other Campbell products.

The Safety FactorThe RMA requires that hose working pressures include a safety factor commensurate with their intended application. Most hoses are required to meet a 4x safety factor, except the following: Water hose rated under 150 PSI requires a 3x safety factor; Steam hose requires a 10x safety factor; and Hose conveying gas in a liquid state requires a 5x safety factor. (For example: a 150 PSI rated air hose has a 4x safety factor and must be successfully tested to a minimum of 600 PSI.)Campbell’s fitting and coupling pressure ratings match the RMA safety factor requirements with most hoses. Due to the wide variety of industrial hoses, as well as variations in design, construction, and material, we cannot guarantee that our pressure ratings meet the safety factor requirement with every hose.If you have any questions about pressure ratings, please contact Campbell Fittings.

Campbell Test Reports

ACampbell Fittings

3

c

Fittings & Accessories for Multi-Purpose and Utility Hose

COMBINATION NIPPLES AND MENDERSFeatures & Benefits• Maximum number

of serrations for maximum holding power.

• Long lead serration for easier hose insertion.

• Formed hex wrench area on 3/4” through 1-1/2” combination nipples for easier installation.

Recommended Hose Attachment• Sleeves• Preformed Bands

Recommended Use• Liquid, bulk handling, low-

pressure air

Bauer-style vs. Campbell Ball & Socket

SUCTION HOSE COUPLINGSFeatures & Benefits• Maximum number of serrations for

maximum holding power.• Long lead serration for easier hose

insertion.• Suction Couplings machined from

pipe eliminate porosity and parting lines, improving sealing and retention.

Recommended Hose Attachment• Sleeves• Preformed Bands

Recommended Use• Liquid, bulk handling

Manufacturing Suction Hose Couplings from pipe eliminates wide, flat mating surfaces at the male and female halves.

BALL & SOCKET COUPLINGS Features & Benefits• Proven, Campbell-style machined

hose shank is designed for crimping (crimp specs available).

• Shank design dramatically improves sealing and retention, cuts installation time in half.

• Hose shanks are welded to ball & socket ball ends.

Recommended Hose Attachment• Sleeves

Recommended Use• Water Suction/Discharge• Sewage bypass

Campbell Crimpnology™ offers crimping flexibility for your multi-purpose hose applications.

A

MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1

Hose System Components Hose Size Fitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10 12Combination Nipple Short Sleeve Rubber 400 350 300 275 250 225 225 225 175 175 150 125 100

Combination Nipple Short Sleeve Chemical 200 200 200 140 130 120 110 100 50 - - - -

Combination Nipple Short Sleeve PVC 150 125 100 90 85 65 60 55 40 30 20 - -

Suction Coupling Short Sleeve Rubber - - - 275 250 225 210 200 175 150 100 - -

Suction Coupling Short Sleeve PVC - - - 90 85 65 60 55 40 30 20 - -

Ball & Socket Cplg* Short Sleeve Rubber - - - - - 300 - 250 225 140 60 - -

Ball & Socket Cplg* Short Sleeve PVC - - - - - 170 - 140 100 80 50 - -

See footnotes 1, 2, 3 and 6 on Page 1 *Ball & Socket safety factor is 1.5x working pressure.4

c

ACOMBINATION NIPPLES & MENDERS

THREADED

partnumberHAS-2HAS-3HAS-4HAS-5HAS-6HAS-8HAS-10HAS-12HAS-16HAS-20HAS-24HAS-32HAS-40HAS-48

1/23/411-1/41-1/222-1/2345681012

hosesize

listeach 4.434.545.286.817.629.92

19.5623.4336.1283.8294.67

165.00267.62389.69

Steel

HAPS-2HAPS-3HAPS-4HAPS-5HAPS-6HAPS-8HAPS-10HAPS-12HAPS-16HAPS-20HAPS-24HAPS-32HAPS-40HAPS-48

1/23/411-1/41-1/222-1/2345681012

4.915.076.137.278.58

11.9822.7327.5440.9591.99

105.57203.88337.27491.65

Plated Steel

HASS-2HASS-3HASS-4HASS-5HASS-6HASS-8HASS-10HASS-12HASS-16HASS-20HASS-24HASS-32HASS-40HASS-48

1/23/411-1/41-1/222-1/2345681012

20.8920.9421.0426.8332.9244.5581.92

116.23182.36400.95503.12965.25

2782.435605.26

316 Stainless

HAHAST-4HAHAST-6HAHAST-8HAHAST-12HAHAST-16

11-1/2234

PORPORPORPORPOR

Hastelloy®

HAB-2HAB-3HAB-4HAB-5HAB-6HAB-8HAB-10HAB-12HAB-16

1/23/411-1/41-1/222-1/234

17.9925.8126.0032.9836.9752.8592.75

126.77259.90

Brass

HAA-2HAA-3HAA-4HAA-5HAA-6HAA-8HAA-10HAA-12HAA-16HAA-20HAA-24

1/23/411-1/41-1/222-1/23456

15.9415.1316.1316.8017.1520.2750.4048.0076.78

167.97188.75

Aluminum

BEVELED

partnumberHAS-3 BVHAS-4 BVHAS-5 BVHAS-6 BVHAS-8 BVHAS-10 BVHAS-12 BVHAS-16 BVHAS-20 BVHAS-24 BVHAS-32 BVHAS-40 BVHAS-48 BV

3/411-1/41-1/222-1/2345681012

hosesize

listeach6.806.899.399.50

11.7622.2126.3540.0888.55

101.19181.28320.17453.82

Steel

HASS-2 BVHASS-3 BVHASS-4 BVHASS-5 BVHASS-6 BVHASS-8 BVHASS-10 BVHASS-12 BVHASS-16 BVHASS-20 BVHASS-24 BVHASS-32 BVHASS-40 BVHASS-48 BV

1/23/411-1/41-1/222-1/2345681012

27.3926.8226.1338.9734.1754.3996.71

122.00182.72520.18502.28837.16

PORPOR

316 Stainless

GROOVED

partnumberHAGS-3HAGS-4HAGS-5HAGS-6HAGS-8HAGS-10HAGS-12HAGS-16HAGS-20HAGS-24HAGS-32HAGS-40HAGS-48

3/411-1/41-1/222-1/2345681012

hosesize

listeach14.8910.8913.1314.3217.6323.7125.5437.3784.90

101.58178.05313.73441.60

Steel

HAGSS-4HAGSS-5HAGSS-6HAGSS-8HAGSS-12HAGSS-16HAGSS-20HAGSS-24HAGSS-32

11-1/41-1/2234568

42.5745.8746.0452.41

142.92198.96520.18561.51

1267.59

316 Stainless

REDUCER

partnumberHRS-4X3HRS-5X4HRS-6X5HRS-8X6HRS-10X8HRS-12X10HRS-16X12

1 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 23 X 2-1/24 X 3

npt xhose

listeach11.6615.3413.8616.9630.9637.3275.79

Steel

HRPS-4X3HRPS-5X4HRPS-6X5HRPS-8X6HRPS-10X8HRPS-12X10HRPS-16X12

1 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 23 X 2-1/24 X 3

11.6616.1114.5517.8132.5139.1978.82

Plated Steel

HRSS-4X3HRSS-5X4HRSS-6X5HRSS-8X6HRSS-10X8

1 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 2

46.1657.7283.4098.91

122.23

316 Stainless

Other configurations and materials not listed above can be quoted upon request.

partnumber

hosesize

listeach

5

PHONE 800-367-3678FAX [email protected]

EXPANDER

partnumberHES-3X4HES-4X5HES-5X6HES-6X8HES-8X10HES-10X12HES-12X16

3/4 X 11 X 1-1/41-1/4 X 1-1/21-1/2 X 22 X 2-1/22-1/2 X 33 X 4

npt xhose

listeach8.05

10.1910.8920.3031.1538.2577.02

Steel

Plated SteelHEPS-2X3HEPS-3X4HEPS-4X5HEPS-5X6HEPS-5X8HEPS-6X8HEPS-8X10HEPS-10X12HEPS-12X16

1/2 X 3/43/4 X 11 X 1-1/41-1/4 X 1-1/21-1/4 X 21-1/2 X 22 X 2-1/22-1/2 X 33 X 4

12.938.39

10.8411.3826.9022.1032.4740.4187.58

316 StainlessHESS-2X3HESS-3X4HESS-4X5HESS-4X6HESS-5X6HESS-5X8HESS-6X8HESS-8X10

1/2 X 3/43/4 X 11 X 1-1/41 X 1-1/21-1/4 X 1-1/21-1/4 X 21-1/2 X 22 X 2-1/2

33.4831.8971.7279.6982.9087.6895.66

119.55

MENDER

partnumberHCPS-2HCPS-3HCPS-4HCPS-5HCPS-6HCPS-8HCPS-10HCPS-12HCPS-16HCPS-20HCPS-24HCPS-32HCPS-40HCPS-48

1/23/411-1/41-1/222-1/2345681012

hosesize

listeach7.396.006.109.189.36

12.0922.6623.2841.33

135.3588.75

220.32381.53604.08

Plated Steel

316 StainlessHCSS-3HCSS-4HCSS-5HCSS-6HCSS-8HCSS-12HCSS-16HCSS-24

3/411-1/41-1/22346

57.9563.2968.1780.0482.36

186.61219.08896.02

BrassHCB-3HCB-4HCB-5HCB-6HCB-8

3/411-1/41-1/22

14.6815.1124.4639.7043.69

TOE NIPPLES AND REDUCING NIPPLES

TOE NIPPLES

partnumberRN-2SRN-2RN-3SRN-3RN-4RN-5RN-5LRN-6RN-6LRN-6XLRN-8RN-8LRN-8XLRN-10SRN-12RN-12LRN-12XLRN-16

1/2 X 1-1/21/2 X 23/4 X 1-1/23/4 X 21 X 21-1/4 X 21-1/4 X 2-1/21-1/2 X 21-1/2 X 2-1/21-1/2 X 32 X 22 X 2-1/22 X 32-1/2 X 2-1/23 X 33 X 3-1/23 X 44 X 4

npt xlength

listeach1.951.952.412.433.554.635.205.535.916.726.897.668.77

24.8827.9529.9633.2646.36

Steel

RNS-2SRNS-2RNS-3SRNS-3RNS-4RNS-5RNS-5LRNS-6RNS-6LRNS-6XLRNS-8RNS-8LRNS-8XLRNS-10SRNS-12RNS-12LRNS-12XL

1/2 X 1-1/21/2 X 23/4 X 1-1/23/4 X 21 X 21-1/4 X 21-1/4 X 2-1/21-1/2 X 21-1/2 X 2-1/21-1/2 X 32 X 22 X 2-1/22 X 32-1/2 X 2-1/23 X 33 X 3-1/23 X 4

9.019.399.569.78

14.1314.7315.9416.9917.2418.0423.0223.7528.0466.3170.6876.6389.40

304 Stainless

REDUCING NIPPLES

partnumberNS 3-2NS 4-3NS 5-4NS 6-5NS 8-6NS 10-8NS 12-8NS 12-10NS 16-12

3/4 X 1/21 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 23 X 23 X 2-1/24 X 3

npt xnpt

listeach9.62

10.3015.0916.3117.1534.3055.7437.7560.05

Steel

6

ASUCTION HOSE COUPLINGS

COMPLETE SET

partnumberCSB-5CSB-6CSB-8CSB-10CSB-12CSB-16CSB-24CSB-32

1-1/41-1/222-1/23468

hosesize

listeach45.3632.4541.8960.5571.90

115.74239.86802.05

Shanks: Plated SteelNut: Brass

FEMALE SHANK

partnumberFSB-5FSB-6FSB-8FSB-10FSB-12FSB-16FSB-24FSB-32

1-1/41-1/222-1/23468

hosesize

listeach27.3118.8021.3132.0039.9269.05

136.33599.56

Shank: Plated SteelNut: Brass

MALE SHANK

partnumberMS-5MS-6MS-8MS-10MS-12MS-16MS-24MS-32

1-1/41-1/222-1/23468

hosesize

listeach17.8513.2219.8828.6731.1045.41

100.68159.77

Plated Steel

IMPORT SUCTION HOSE COUPLINGS

COMPLETE SET

partnumberCAB-150CAB-200CAB-250CAB-300CAB-400CAB-600

1-1/222-1/2346

hosesize

listeach12.3218.2533.8438.0267.07

158.11

Shanks: AluminumNut: Brass

CBB-150CBB-200CBB-300CBB-400

1-1/2234

50.6871.99

160.27316.17

Shanks: BrassNut: Brass

FEMALE SHANK

partnumberFAB-150FAB-200FAB-250FAB-300FAB-400FAB-600

1-1/222-1/2346

hosesize

listeach8.61

12.5221.3325.5445.34

107.11

Shank: AluminumNut: Brass

FBB-150FBB-200FBB-300FBB-400

1-1/2234

25.1442.5389.80

162.21

Shank: BrassNut: Brass

MALE SHANK

partnumberMA-150MA-200MA-250MA-300MA-400MA-600

1-1/222-1/2346

hosesize

listeach4.526.30

11.5214.3424.0250.86

Aluminum

MB-150MB-200MB-300MB-400

1-1/2234

22.5632.7878.29

128.61

Brass

IMPORT SUCTION HOSE COUPLINGS (NST threads)

COMPLETE SET

partnumberNSTA-150NSTA-250

1-1/22-1/2

hosesize

listeach19.2836.95

Shanks: AluminumNut: Brass

NSTD-150NSTD-250

1-1/22-1/2

22.3659.13

Shanks: Ductile IronNut: Ductile Iron

NSTB-150NSTB-250

1-1/22-1/2

64.92142.15

Shanks: BrassNut: Brass

WASHER

partnumberWN-5WN-6WN-8WN-10WN-12WN-16WN-24WN-32

1-1/41-1/222-1/23468

hose size

listeach0.740.740.820.951.491.917.50

16.23

Neoprene (NPSM)

SPANNER WRENCH

partnumberSW-6SW-8SW-12SW-16SW-32SW-32

1-1/223468

sizelist

each10.0410.0412.0312.0357.2857.28

ADJUSTABLE HYDRANT WRENCH

partnumberAHW-1

listeach54.89

• Adjustable for 1-1/4” square nuts and pentagon hydrant nuts up to 1-3/4” point to flat.

• Spanner hook for 1-1/2” through 6” pin lug nuts.

• 18” overall length.

7

ROUND HOLE STEEL STRAINER

partnumberRHS-6RHS-8RHS-10RHS-12RHS-16RHS-24RHS-32

1-1/222-1/23468

npsmsize

listeach22.4025.5629.3435.0148.70

136.95304.36

FOOT VALVES& STRAINERS

SQUARE HOLE STEEL STRAINER

partnumberSHS-6SHS-8SHS-10SHS-12SHS-16SHS-24

1-1/222-1/2346

npsmsize

listeach22.6025.7029.5537.7652.54

147.76

TOP HOLESTEEL STRAINER

partnumberTHS-6THS-8THS-12

1-1/223

npsmsize

listeach65.3373.10

165.11

BOTTOM HOLESTEEL STRAINER

partnumberBHS-6BHS-8BHS-12

1-1/223

npsmsize

listeach70.3679.79

178.67

FOOT VALVE(painted cast iron)

partnumberFV-6FV-8FV-10FV-12FV-16FV-24FV-32

1-1/222-1/23468

nptsize

listeach32.5051.6261.0579.60

140.28339.62688.40

BALL & SOCKET COUPLINGS

FEMALE*(socket x machined hose end)

partnumberBFGS-8BFGS-12BFGS-16BFGS-24BFGS-32

23468

hosesize

listeach61.3286.26

110.70229.67410.45

*Sold without SBR ring gasket

BALL & SOCKET COMPLETE SET

partnumberBSGS-8BSGS-12BSGS-16BSGS-24BSGS-32

23468

hosesize

listeach

163.00245.00310.00625.00

1060.00

MALE(ball x machined hose end)

partnumberBMGS-8BMGS-12BMGS-16BMGS-24BMGS-32

23468

hosesize

listeach60.7785.22

105.09207.49363.73

RING GASKET

partnumberBSG-8BSG-12BSG-16BSG-24BSG-32

23468

hosesize

listeach5.086.155.97

11.6719.97

SBR

Foot Valve components are available upon request.

8

NEW!


BCampbell Fittings

9

c

Fittings for Critical Application or High Pressure Multi-Purpose Hose & Chemical Hose

Crimpnology Nipple

Smooth End Detail

Rounder Serrations

Sharper Serrations

Interlock Groove

Flanges meet ANSI/ASME B16.5 150 pound

class specifications.

Campbell Crimpnology™ offers crimping flexibility for your multi-purpose hose applications.

CRIMPNOLOGY NIPPLESFeatures & Benefits• Designed for use with Campbell

Interlocking Ferrules.• Fittings use the same ferrules as

Campbell COBRA Parts C and E, ChemJoint Couplings, and ContiTech Insta-Lock Cam & Groove Couplings to keep ferrule inventory low and flexible.

• Interlock groove on fitting locks ferrule into place for the ultimate in holding power.

• Campbell’s built in ferrule positioning stop eases and speeds crimping.

• Graduated serration pattern (sharper near the interlock, rounder near the end, with smooth end detail to reduce potential failure caused by abrasion) grips, seals, and protects hose.

• Shank and ferrule lengths are matched for performance and to avoid potential hose tube or cover damage.

• Crimped assemblies are low profile and eliminate sharp edges from band clamp buckles.

Special Features• Crimpnology Nipples provide an

excellent fitting solution for medium pressure applications such as “Frac Hose”, mud-pump hose, and other abusive applications.

• Long Shank Crimpnology Nipples provide excellent sealing and retention for high-pressure applications. (See ratings chart below)

• 206 Hose Union machined from forged steel, eliminates porosity.

B

CRIMPNOLOGY SWIVELFeatures & Benefits• 360° swivel rotation between the

threaded hex and hose barb for easy installation, eliminates hose kinking.

• Threaded body includes hex wrench-flats.

• Viton O-Ring and snap ring inside hex area.

SwivelHex Body

Crimpnology Swivel


Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8Crimpnology Nipple Ferrule Chem/Rubber - 500 350 325 300 275 250 250 225 175

Crimpnology Nipple Ferrule Soft - 200 175 150 150 125 100 75 50 20

Long Crimpnology Nipple Long Ferrule Rubber - - - 1000 1000 650 600 500 - -

Crimpnology Nipple Swivel Ferrule Chem/Rubber 500 500 - - - - - - - -

Long Crimpnology Nipple Swivel Long Ferrule Chem/Rubber - - 500 500 500 - - - - -

Crimpnology Flange (steel) Ferrule Chem/Rubber - - - 285 285 275 250 250 225 175

Crimpnology Flange (ss) Ferrule Chem/Rubber - - - 230 230 230 230 230 225 -

FRAC-16C Frac Ferrule Rubber - - - - - - - 400 - -

206 Hose Union (forged steel) Frac Ferrule Rubber - - - - - - - 400 - -

See footnotes 1, 2 and 4 on Page 1

NEW!

10

Note: Swivel is not for continuous rotation applications.

c

Fittings for Critical Application or High Pressure Multi-Purpose Hose & Chemical Hose B

THREADED

partnumberHAPS-4CHAPS-5CHAPS-6CHAPS-8CHAPS-10CHAPS-12CHAPS-16CHAPS-20CHAPS-24CHAPS-32C

11-1/41-1/222-1/234568

hosesize

listeach21.4023.9422.9227.2543.5551.9864.25POR

136.11274.60

Plated Steel

CRIMPNOLOGY NIPPLES

HASS-4CHASS-5CHASS-6CHASS-8CHASS-10CHASS-12CHASS-16CHASS-20CHASS-24CHASS-32C

11-1/41-1/222-1/234568

34.3848.8851.4863.68

110.59136.29201.42

POR744.70

POR

316 Stainless

HAHAST-4CHAHAST-6CHAHAST-8C

11-1/22

PORPORPOR

Hastelloy®

SQUARE CUT END

partnumberHAS-6C SQHAS-8C SQHAS-10C SQHAS-12C SQHAS-16C SQHAS-24C SQHAS-32C SQ

1-1/222-1/23468

hosesize

listeach23.2227.5541.8048.9661.92

112.12274.60

Steel

HASS-6C SQHASS-8C SQHASS-10C SQHASS-12C SQHASS-16C SQHASS-24C SQHASS-32C SQ

1-1/222-1/23468

54.8967.15

113.95140.55207.66781.87

POR

316 Stainless

GROOVED

partnumberHAGS-6CHAGS-8CHAGS-10CHAGS-12CHAGS-16CHAGS-24CHAGS-32C

1-1/222-1/23468

hosesize

listeach30.2836.3356.0765.1378.76

139.62POR

Steel

HAGSS-4CHAGSS-6CHAGSS-8CHAGSS-10CHAGSS-12CHAGSS-16CHAGSS-24CHAGSS-32C

11-1/222-1/23468

51.4465.7781.05

164.67192.69253.11787.95

POR

316 Stainless

206 HOSE UNION SET

partnumber206S-16C-4004

hosesize

listeach

281.30

Forged Steel

SCH. 80 THREADED LONG SHANK

partnumberHALPS-6CHALPS-8CHALPS-10CHALPS-12CHALPS-16C

1-1/222-1/234

hosesize

listeach38.1639.3066.1888.13

130.11

Steel

Stainless Steel206SS-16C-4004 1450.00

206 HOSE UNION - 2PC NUT(for field repair)

partnumber206N-16C 2 PC4

hosesize

listeach

138.05

Steel

MALE SWIVEL

partnumberHAPS-3C SWHAPS-4C SWHALPS-5C SWHALPS-6C SWHALPS-8C SW

3/411-1/41-1/22

hosesize

listeach72.2674.9195.92

126.76203.44

Steel

partnumberHASS-3C SWHASS-4C SWHALSS-5C SWHALSS-6C SWHALSS-8C SW

3/411-1/41-1/22

hosesize

listeachPORPORPORPORPOR

316 Stainless

SCH. 80 THREADED(for 400 psi frac hose)

partnumberFRAC-16C4

hosesize

listeach74.00

Steel

Use only heavy dutyFRAC ferrules

NEW!

11

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!NEW!

NEW!

FF150SS-4FF150SS-6FF150SS-8FF150SS-10FF150SS-12FF150SS-16FF150SS-24FF150SS-32

11-1/222-1/23468

63.8285.16

119.35149.96171.08254.17379.13779.40

316 Stainless

FLANGE-THREADED(150lb.)

partnumberFT150S-6FT150S-8FT150S-10FT150S-12FT150S-16FT150S-24FT150S-32

1-1/222-1/23468

nptsize

listeach20.1848.5463.2056.1474.63

120.67321.37

Steel

FT150SS-4FT150SS-6FT150SS-8FT150SS-10FT150SS-12FT150SS-16FT150SS-24FT150SS-32

11-1/222-1/23468

63.82110.41119.95149.96167.33265.34357.26885.68

316 Stainless

FLANGE-SLIP ON(150lb.)

partnumberFS150S-6FS150S-8FS150S-10FS150S-12FS150S-16FS150S-24FS150S-32

1-1/222-1/23468

nptsize

listeach24.2233.2653.5939.9748.1170.73

138.97

Steel

FS150SS-4FS150SS-6FS150SS-8FS150SS-10FS150SS-12FS150SS-16FS150SS-24FS150SS-32

11-1/222-1/23468

54.8268.2479.73

116.88137.41159.42243.20546.55

316 Stainless

FLANGED (with 150lb. fixed flange)

partnumberFHAS-6CFHAS-8CFHAS-10CFHAS-12CFHAS-16CFHAS-24CFHAS-32C

1-1/222-1/23468

hosesize

listeach97.91

100.26178.94146.13181.25314.74530.00

Steel

FHASS-4CFHASS-6CFHASS-8CFHASS-10CFHASS-12CFHASS-16CFHASS-24CFHASS-32C

11-1/222-1/23468

234.67286.06304.82443.42489.72670.11

1065.00POR

316 Stainless

TURNBACK(for use with 150lb. floating flange)

partnumberTHAS-6CTHAS-8CTHAS-10CTHAS-12CTHAS-16CTHAS-24CTHAS-32C

1-1/222-1/23468

hosesize

listeach46.3251.0298.92

106.00167.66447.80627.90

Steel

THASS-4CTHASS-6CTHASS-8CTHASS-10CTHASS-12CTHASS-16CTHASS-24CTHASS-32C

11-1/222-1/23468

92.99103.19192.75258.44344.99466.62918.75

POR

316 Stainless

partnumber

hosesize

listeach

12


FLANGE-FLOATING(150lb.)

partnumberFF150S-6FF150S-8FF150S-10FF150S-12FF150S-16FF150S-24FF150S-32

1-1/222-1/23468

hosesize

listeach20.1741.5737.9739.9450.0579.16

229.65

Steel

CCampbell Fittings

13

Cam & Groove Couplings for Liquid, Bulk, and Chemical Transfer

Campbell Crimpnology™ offers crimping flexibility for your liquid, bulk, and chemical transfer hose applications.

byCampbell COBRA

Campbell Cobra Part C and matching Campbell Interlocking Ferrule

Locking Handle

Special Feature• Locking handles

can be purchased assembled onto the coupling or as a kit and retrofitted onto existing inventory ... another easy and cost-effective way to keep inventory flexible.

Ferrule zone:

3-15/16”

Ferrule length:

3-15/16”

“CAMPBELL COBRA” VS. “STANDARD COBRA”“COBRA” is the trade name for our entire line of Cam & Groove Couplings. “Campbell COBRA” is the upgraded version of Parts C and E. Although imported, Campbell COBRA C’s and E’s are designed by Campbell and produced to strict Campbell specifications.

Features & Benefits• Designed for use with Campbell

Interlocking Ferrules.• 360° interlock groove on fitting locks

ferrule into place for the ultimate in holding power.

• Shank and ferrule lengths are matched for performance and to avoid potential hose tube or hose cover damage. *See picture on right.

• Serrations designed to grip, seal, and protect hose when crimped. Note: Traditional “two bump” designs are for banding, not crimping. Campbell does not recommend crimping on “two bump” shanks.

• Crimped assemblies are low profile and eliminate sharp edges from band clamp buckles.

• Couplings use the same ferrules as Crimpnology Nipples, ChemJoint Couplings, and ContiTech Insta-Lock Cam & Groove Couplings to keep your inventory to keep ferrule inventory low and flexible.

• Designed to couple and interchange with couplings made to specifications: ASTM F1122, CID A-A-59326, MIL-C-27487.

Recommended Hose Attachment• Interlocking ferrules

Recommended Use• Multi-purpose liquid, chemical,

bulk handling

C


Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1 1-1/4 1-1/2 2 2-1/2 3 4 6

Campbell Cobra SS C&G Ferrule Chem/Rubber 250 - 250 250 150 150 125 -

Campbell Cobra AL C&G Ferrule Chem/Rubber - - 250 200 150 125 75 call

See footnotes 1, 2 and 5 on Page 114

CCAMPBELL COBRA CAM & GROOVE COUPLINGS

PART C(with ferrule interlock)

partnumberC-316-100CC-316-150CC-316-200CC-316-250CC-316-300CC-316-400C

11-1/222-1/234

hosesize

listeach26.9050.7873.0697.11

129.30189.99

316 Stainless

C-AL-150CC-AL-200CC-AL-250CC-AL-300CC-AL-400CC-AL-600C

1-1/222-1/2346

12.8015.8021.1526.2936.34

115.76

Aluminum

C-BR-100CC-BR-150CC-BR-200CC-BR-300CC-BR-400C

11-1/2234

31.8347.8362.10

120.45167.58

Brass

C-S-100CC-S-150CC-S-200CC-S-300CC-S-400C

11-1/2234

23.0532.5238.3563.4298.54

Steel (investment cast)

PART C - LOCKING HANDLES(with ferrule interlock)

partnumberCL-316-100CCL-316-150CCL-316-200CCL-316-300CCL-316-400C

11-1/2234

hosesize

listeach56.6284.07

106.32181.49259.39

316 Stainless

CL-AL-150CCL-AL-200CCL-AL-300CCL-AL-400C

1-1/2234

68.6374.9292.49

103.56

Aluminum

PART E(with ferrule interlock)

partnumberE-316-100CE-316-150CE-316-200CE-316-250CE-316-300CE-316-400C

11-1/222-1/234

hosesize

listeach20.2739.6063.0984.61

110.59170.58

316 Stainless

E-AL-150CE-AL-200CE-AL-250CE-AL-300CE-AL-400CE-AL-600C

1-1/222-1/2346

6.388.28

13.4714.7824.2670.61

Aluminum

E-BR-100CE-BR-150CE-BR-200CE-BR-300CE-BR-400C

11-1/2234

21.4536.0250.1398.75

151.42

Brass

E-S-100CE-S-150CE-S-200CE-S-300CE-S-400C

11-1/2234

15.3120.0630.9054.2373.04

Steel (investment cast)

CONE STRAINERS(for use with Part C’s)

partnumberCGSS-8CGSS-12CGSS-16CGSS-24CGSS-32

23468

hosesize

listeach41.9535.3342.3765.05

117.85

Stainless

STANDARD COBRA CAM & GROOVE COUPLINGS

PART A

partnumberA-316-50A-316-75A-316-100A-316-125A-316-150A-316-200A-316-250A-316-300A-316-400A-316-500A-316-600A-316-800

1/23/411-1/41-1/222-1/234568

nptsize

listeach13.2313.2716.3723.3228.0733.1459.3564.65

122.20198.81248.72635.10

316 Stainless

A-SS-50A-SS-75A-SS-100A-SS-125A-SS-150A-SS-200A-SS-250A-SS-300A-SS-400A-SS-500A-SS-600A-SS-800

1/23/411-1/41-1/222-1/234568

10.2910.2812.3718.1820.9724.4443.5446.9892.84

157.26191.88492.77

304 Stainless

A-AL-50A-AL-75A-AL-100A-AL-125A-AL-150A-AL-200A-AL-250A-AL-300A-AL-400A-AL-500A-AL-600A-AL-800

1/23/411-1/41-1/222-1/234568

4.163.794.335.954.925.80

11.0910.6617.5736.7136.76

150.26

Aluminum

A-BR-50A-BR-75A-BR-100A-BR-125A-BR-150A-BR-200

1/23/411-1/41-1/22

10.4610.2711.6417.1218.0024.36

Brass

continued on next page

CAM & GROOVESIGHT GLASS

partnumberSGPC-200SGPC-300SGPC-400

234

sizelist

each76.25

110.75161.45

Polycarbonate

partnumber

hosesize

listeach

15

NEW!

A-DI-150A-DI-200A-DI-300A-DI-400A-DI-500

1-1/22345

14.9117.8927.9745.2261.53

Ductile Iron

A-PP-50A-PP-75A-PP-100A-PP-125A-PP-150A-PP-200A-PP-300A-PP-400

1/23/411-1/41-1/2234

2.362.362.794.244.285.058.96

21.75

Poly-Glass

PART B

partnumberB-316-50B-316-75B-316-100B-316-125B-316-150B-316-200B-316-250B-316-300B-316-400B-316-500B-316-600

1/23/411-1/41-1/222-1/23456

nptsize

listeach21.3821.4028.0939.9147.4856.3772.77

105.98160.09261.25358.85

316 Stainless

B-SS-50B-SS-75B-SS-100B-SS-125B-SS-150B-SS-200B-SS-250B-SS-300B-SS-400B-SS-500B-SS-600

1/23/411-1/41-1/222-1/23456

18.1718.1322.2130.9834.6242.8054.4578.68

118.81190.54264.20

304 Stainless

B-AL-50B-AL-75B-AL-100B-AL-125B-AL-150B-AL-200B-AL-250B-AL-300B-AL-400B-AL-500B-AL-600B-AL-800

1/23/411-1/41-1/222-1/234568

9.218.209.78

12.2711.5413.0421.9222.6628.5160.9368.73

295.44

Aluminum

B-BR-50B-BR-75B-BR-100B-BR-125B-BR-150B-BR-200B-BR-250B-BR-300B-BR-400B-BR-500B-BR-600

1/23/411-1/41-1/222-1/23456

18.8518.7422.6729.6932.1939.9756.8577.89

110.50271.64320.17

Brass

B-DI-150B-DI-200B-DI-300B-DI-400B-DI-500

1-1/22345

27.4428.6950.1967.4095.69

Ductile Iron

B-PP-50B-PP-75B-PP-100B-PP-125B-PP-150B-PP-200B-PP-300B-PP-400

1/23/411-1/41-1/2234

7.307.307.78

10.2811.4813.5222.1740.18

Poly-Glass

PART C(for use with sleeves or bands)

partnumberC-316-50C-316-75C-316-100C-316-125C-316-150C-316-200C-316-250C-316-300C-316-400C-316-500C-316-600

1/23/411-1/41-1/222-1/23456

hosesize

listeach21.1619.3425.1338.2340.2055.2182.5198.70

155.67340.96397.83

316 Stainless

C-AL-50C-AL-75C-AL-100C-AL-125C-AL-150C-AL-200C-AL-250C-AL-300C-AL-400C-AL-500C-AL-600C-AL-800

1/23/411-1/41-1/222-1/234568

7.227.188.55

12.7211.4313.4020.6923.9235.0965.2779.54

297.51

Aluminum

C-ALS-75C-ALS-100C-ALS-125C-ALS-150C-ALS-200C-ALS-250C-ALS-300C-ALS-400C-ALS-600

3/411-1/41-1/222-1/2346

6.968.28

12.3411.0912.9920.0723.2134.0477.15

Aluminum(with stainless handles)

C-BR-50C-BR-75C-BR-100C-BR-125C-BR-150C-BR-200C-BR-250C-BR-300C-BR-400C-BR-500C-BR-600

1/23/411-1/41-1/222-1/23456

17.7217.9624.9232.7733.7844.9358.9579.19

116.79281.67371.25

Brass

C-DI-150C-DI-200C-DI-300C-DI-400C-DI-500

1-1/22345

27.7032.6454.0179.98

123.87

Ductile Iron

C-PP-50C-PP-75C-PP-100C-PP-125C-PP-150C-PP-200C-PP-300C-PP-400

1/23/411-1/41-1/2234

7.547.548.57

10.9612.4814.6022.1741.88

Poly-Glass

B-ALS-75B-ALS-100B-ALS-125B-ALS-150B-ALS-200B-ALS-250B-ALS-300B-ALS-400B-ALS-600

3/411-1/41-1/222-1/2346

7.959.48

11.9111.1912.6421.2721.9827.6566.68


C-SS-50C-SS-75C-SS-100C-SS-125C-SS-150C-SS-200C-SS-250C-SS-300C-SS-400C-SS-500C-SS-600C-SS-800

1/23/411-1/41-1/222-1/234568

17.5715.7921.0931.3736.4647.9767.1692.55

135.65248.70292.25810.45

304 Stainlesspartnumber

nptsize

listeach part

numbernptsize

listeach

partnumber

nptsize

listeach

16


A-BR-250A-BR-300A-BR-400A-BR-500A-BR-600

2-1/23456

39.1347.0581.17

174.62233.19

PART A (continued from previous page)

CPART D

partnumberD-316-50D-316-75D-316-100D-316-125D-316-150D-316-200D-316-250D-316-300D-316-400D-316-500D-316-600

1/23/411-1/41-1/222-1/23456

nptsize

listeach21.4021.4028.0540.6049.4461.3887.78

110.84170.97317.86346.86

316 Stainless

D-SS-50D-SS-75D-SS-100D-SS-125D-SS-150D-SS-200D-SS-250D-SS-300D-SS-400D-SS-500D-SS-600

1/23/411-1/41-1/222-1/23456

18.4618.4622.2132.6939.1147.5367.5991.07

133.86225.09263.46

304 Stainless

D-AL-50D-AL-75D-AL-100D-AL-125D-AL-150D-AL-200D-AL-250D-AL-300D-AL-400D-AL-500D-AL-600D-AL-800

1/23/411-1/41-1/222-1/234568

10.488.579.78

13.3712.1514.2722.6923.0733.2062.4576.58

279.79

Aluminum

D-BR-50D-BR-75D-BR-100D-BR-125D-BR-150D-BR-200D-BR-250D-BR-300D-BR-400D-BR-500D-BR-600

1/23/411-1/41-1/222-1/23456

18.3018.7223.1234.3232.8840.7858.5674.07

116.28247.83333.64

Brass

D-DI-150D-DI-200D-DI-300D-DI-400D-DI-500

1-1/22345

27.7042.6952.5678.93

107.88

Ductile Iron

D-PP-50D-PP-75D-PP-100D-PP-125D-PP-150D-PP-200D-PP-300D-PP-400

1/23/411-1/41-1/2234

7.747.748.57

10.7211.8114.3924.9943.82

Poly-Glass

D-ALS-75D-ALS-100D-ALS-125D-ALS-150D-ALS-200D-ALS-250D-ALS-300D-ALS-400D-ALS-600

3/411-1/41-1/222-1/2346

8.329.48

12.9711.7813.8422.0122.3832.2174.28


PART E(for use with sleeves or bands)

partnumberE-316-50E-316-75E-316-100E-316-125E-316-150E-316-200E-316-250E-316-300E-316-400E-316-500E-316-600

1/23/411-1/41-1/222-1/23456

hosesize

listeach10.8311.6718.9727.5931.4547.4071.8895.73

145.77269.39360.87

316 Stainless

E-SS-50E-SS-75E-SS-100E-SS-125E-SS-150E-SS-200E-SS-250E-SS-300E-SS-400E-SS-500E-SS-600

1/23/411-1/41-1/222-1/23456

9.299.29

13.6419.9225.1037.6453.8777.20

117.93196.51261.40

304 Stainless

E-AL-50E-AL-75E-AL-100E-AL-125E-AL-150E-AL-200E-AL-250E-AL-300E-AL-400E-AL-500E-AL-600E-AL-800

1/23/411-1/41-1/222-1/234568

4.324.204.646.955.336.97

12.8314.2423.6549.8859.30

181.17

Aluminum

E-BR-50E-BR-75E-BR-100E-BR-125E-BR-150E-BR-200E-BR-250E-BR-300E-BR-400E-BR-500E-BR-600

1/23/411-1/41-1/222-1/23456

9.9913.0414.0419.7823.4933.6048.1763.84

104.31251.03329.91

Brass

E-DI-150E-DI-200E-DI-300E-DI-400E-DI-500

1-1/22345

16.0826.3146.1662.20

100.15

Ductile Iron

E-PP-50E-PP-75E-PP-100E-PP-125E-PP-150E-PP-200E-PP-300E-PP-400

1/23/411-1/41-1/2234

2.732.733.234.594.664.949.60

19.04

Poly-Glass

PART F

partnumberF-316-50F-316-75F-316-100F-316-125F-316-150F-316-200F-316-250F-316-300F-316-400F-316-500F-316-600

1/23/411-1/41-1/222-1/23456

nptsize

listeach14.6214.6221.4031.4437.6450.0271.5796.10

169.29274.47373.56

316 Stainless

F-SS-50F-SS-75F-SS-100F-SS-125F-SS-150F-SS-200F-SS-250F-SS-300F-SS-400F-SS-500F-SS-600

1/23/411-1/41-1/222-1/23456

13.4312.8416.2823.7529.6637.0351.3774.10

127.66200.56277.35

304 Stainless

partnumber

nptsize

listeach

partnumber

nptsize

listeach

17


F-AL-50F-AL-75F-AL-100F-AL-125F-AL-150F-AL-200F-AL-250F-AL-300F-AL-400F-AL-500F-AL-600F-AL-800

1/23/411-1/41-1/222-1/234568

5.714.695.008.216.217.34

14.5815.3522.0448.1854.11

210.34

Aluminum

F-BR-50F-BR-75F-BR-100F-BR-125F-BR-150F-BR-200F-BR-250F-BR-300F-BR-400F-BR-500F-BR-600

1/23/411-1/41-1/222-1/23456

11.7511.7514.6921.9923.0932.1351.7565.82

103.34212.96280.78

Brass

F-DI-150F-DI-200F-DI-300F-DI-400F-DI-500

1-1/22345

18.1523.0935.5156.3281.13

Ductile Iron

F-PP-50F-PP-75F-PP-100F-PP-125F-PP-150F-PP-200F-PP-300F-PP-400

1/23/411-1/41-1/2234

2.732.733.034.284.544.94

10.5519.04

Poly-Glass

PART DC

partnumberDC-316-50DC-316-75DC-316-100DC-316-125DC-316-150DC-316-200DC-316-250DC-316-300DC-316-400DC-316-500DC-316-600

1/23/411-1/41-1/222-1/23456

sizelist

each19.0619.1923.3231.7436.4644.1463.0384.14

116.16226.28300.66

316 Stainless

DC-SS-50DC-SS-75DC-SS-100DC-SS-125DC-SS-150DC-SS-200DC-SS-250DC-SS-300DC-SS-400DC-SS-500DC-SS-600

1/23/411-1/41-1/222-1/23456

14.9015.4918.1526.0627.6234.0948.2568.2093.72

171.36215.63

304 Stainless

DC-AL-50DC-AL-75DC-AL-100DC-AL-125DC-AL-150DC-AL-200DC-AL-250DC-AL-300DC-AL-400DC-AL-500DC-AL-600DC-AL-800

1/23/411-1/41-1/222-1/234568

7.267.908.33

13.5710.3711.9916.8419.9225.1542.6363.47

254.99

Aluminum

DC-BR-50DC-BR-75DC-BR-100DC-BR-125DC-BR-150DC-BR-200DC-BR-250DC-BR-300DC-BR-400DC-BR-500DC-BR-600

1/23/411-1/41-1/222-1/23456

16.6617.7721.2727.4429.8436.5144.5766.9990.20

207.95238.73

Brass

DC-DI-150DC-DI-200DC-DI-300DC-DI-400DC-DI-500

1-1/22345

23.3325.7141.6357.9688.29

Ductile Iron

DC-PP-50DC-PP-75DC-PP-100DC-PP-125DC-PP-150DC-PP-200DC-PP-300DC-PP-400

1/23/411-1/41-1/2234

7.367.367.98

10.2811.2713.5322.0035.99

Poly-Glass

DC-ALS-75DC-ALS-100DC-ALS-125DC-ALS-150DC-ALS-200DC-ALS-250DC-ALS-300DC-ALS-400DC-ALS-600

3/411-1/41-1/222-1/2346

7.658.07

13.1610.0711.6316.3419.3224.3961.56


PART DP

partnumberDP-316-50DP-316-75DP-316-100DP-316-125DP-316-150DP-316-200DP-316-250DP-316-300DP-316-400DP-316-600

1/23/411-1/41-1/222-1/2346

sizelist

each8.728.72

10.8618.4622.4433.5048.7156.2596.38

251.65

316 Stainless

DP-SS-50DP-SS-75DP-SS-100DP-SS-125DP-SS-150DP-SS-200DP-SS-250DP-SS-300DP-SS-400DP-SS-600

1/23/411-1/41-1/222-1/2346

8.726.938.33

14.6216.3724.3637.0342.0670.71

172.84

304 Stainless

DP-AL-50DP-AL-75DP-AL-100DP-AL-125DP-AL-150DP-AL-200DP-AL-250DP-AL-300DP-AL-400DP-AL-500DP-AL-600

1/23/411-1/41-1/222-1/23456

4.123.924.194.894.184.89

10.069.51

15.2427.9231.76

Aluminum

DP-BR-50DP-BR-75DP-BR-100DP-BR-125DP-BR-150DP-BR-200DP-BR-250DP-BR-300DP-BR-400DP-BR-500DP-BR-600

1/23/411-1/41-1/222-1/23456

10.2910.4012.7914.8615.1421.3829.6736.2955.10

143.94171.64

Brass

DP-DI-150DP-DI-200DP-DI-300DP-DI-400DP-DI-500

1-1/22345

12.9816.8522.9132.7954.89

Ductile Iron

DP-PP-50DP-PP-75DP-PP-100DP-PP-125DP-PP-150DP-PP-200DP-PP-300DP-PP-400

1/23/411-1/41-1/2234

2.662.552.773.163.354.278.24

14.90

Poly-Glass

partnumber

nptsize

listeach

partnumbersize

listeach

18


PART F (continued from previous page)

CTYPE A SWIVEL ADAPTER

partnumberASV-AL-300ASV-AL-400

34

nptsize

listeach

189.00288.75

Aluminum

TYPE D SWIVEL COUPLING

partnumberDSV-AL-300DSV-AL-400

34

nptsize

listeach

246.75367.50

Aluminum

SPOOL ADAPTER

partnumberAA-316-100AA-316-150AA-316-1520AA-316-200AA-316-2030AA-316-300AA-316-3040AA-316-400

1 X 11-1/2 X 1-1/21-1/2 X 22 X 22 X 33 X 33 X 44 X 4

adapterx adapter

listeach84.1089.96

107.24113.73146.90197.38241.10304.28

316 Stainless

AA-AL-100AA-AL-150AA-AL-200AA-AL-2030AA-AL-250AA-AL-300AA-AL-3040AA-AL-400AA-AL-4060AA-AL-600

1 X 11-1/2 X 1-1/22 X 22 X 32-1/2 X 2-1/23 X 33 X 44 X 44 X 66 X 6

14.2816.5818.7726.5027.5735.5346.3747.15

101.25101.27

Aluminum

AA-BR-150AA-BR-200AA-BR-250AA-BR-300AA-BR-400

1-1/2 X 1-1/22 X 22-1/2 X 2-1/23 X 34 X 4

65.6182.72

117.21140.85194.95

Brass

DOUBLE D

partnumberDD-316-150DD-316-200DD-316-300DD-316-400

1-1/2 X 1-1/22 X 23 X 34 X 4

couplersize

listeach

116.89150.83233.49314.52

316 Stainless

DD-AL-150DD-AL-200DD-AL-2030DD-AL-300DD-AL-3040DD-AL-400DD-AL-600

1-1/2 X 1-1/22 X 22 X 33 X 33 X 44 X 46 X 6

49.4355.18

85.1677.34

115.76102.78299.25

Aluminum

JUMP SIZE COUPLER XADAPTER

316 StainlesspartnumberDA-316-2015DA-316-3020DA-316-4030DA-316-6040

2 X 1-1/23 X 24 X 36 X 4

couplerx adapter

listeach

164.38170.14253.08453.98

DA-AL-1510DA-AL-1520DA-AL-2015DA-AL-2030DA-AL-2040DA-AL-3015DA-AL-3020DA-AL-3040DA-AL-4020DA-AL-4030DA-AL-4060DA-AL-6040

1-1/2 X 11-1/2 X 22 X 1-1/22 X 32 X 43 X 1-1/23 X 23 X 44 X 24 X 34 X 66 X 4

47.5551.4546.2343.9283.2364.4954.5670.5173.7868.87

138.14152.73

Aluminum

DA-BR-2030DA-BR-3020DA-BR-4020DA-BR-4030DA-BR-6040

2 X 33 X 24 X 24 X 36 X 4

161.55195.78273.29283.92476.89

Brass

JUMP SIZE A

partnumberA-AL-2030A-AL-3020A-AL-3040A-AL-4030A-AL-4060A-AL-6040

2 X 33 X 23 X 44 X 34 X 66 X 4

adapter xfemale npt

listeach36.9136.3962.5857.05

146.32146.32

Aluminum

JUMP SIZE B

partnumberB-AL-1510B-AL-2015B-AL-3020B-AL-3040B-AL-4030

1-1/2 X 12 X 1-1/23 X 23 X 44 X 3

coupler xmale npt

listeach68.9146.8948.6692.0490.89

Aluminum

JUMP SIZE C(for use with sleeves or bands)

AluminumpartnumberC-AL-3020C-AL-3040C-AL-4030

3 X 23 X 44 X 3

couplerx hose

listeach60.7292.6681.32

JUMP SIZE D

partnumberD-AL-1510D-AL-2015D-AL-3020D-AL-4030

1-1/2 X 12 X 1-1/23 X 24 X 3

coupler xfemale npt

listeach46.8446.8457.2987.10

Aluminum

JUMP SIZE E(for use with sleeves or bands)

AluminumpartnumberE-AL-2015E-AL-2025E-AL-2030E-AL-3020E-AL-3025E-AL-3040E-AL-4020E-AL-4030

2 X 1-1/22 X 2-1/22 X 33 X 23 X 2-1/23 X 44 X 24 X 3

adapter xhose

listeach15.1320.2122.6330.6533.1638.1735.3345.15

JUMP SIZE F

partnumberF-AL-3015F-AL-3020F-AL-3040

3 X 1-1/23 X 23 X 4

adapter xmale npt

listeach48.4446.6267.50

Aluminum

19

NEW!

NEW!

GASKET

partnumberBG-50BG-75BG-100BG-125BG-150BG-200BG-250BG-300BG-400BG-500BG-600BG-800

1/23/411-1/41-1/222-1/234568

sizelist

each0.710.710.710.800.800.800.951.021.433.583.85

17.93

Buna-N

VG-75VG-100VG-150VG-200VG-250VG-300VG-400

3/411-1/222-1/234

4.686.789.51

10.0913.5616.1024.21

Viton®

TG-100TG-150TG-200TG-250TG-300TG-400

11-1/222-1/234

38.4050.2156.9856.9865.0589.89

Teflon® (Teflon® Encapsulated Viton®)

HANDLE, RING AND PIN

partnumberHRPSS-75HRPSS-100HRPSS-200HRPSS-200HRPSS-200HRPSS-200HRPSS-300HRPSS-300HRPSS-300HRPSS-600HRPSS-600

3/411-1/41-1/222-1/234568

sizelist

each4.244.24

12.1012.1012.1012.1015.4515.4515.4542.6542.65

Ring/Pin: StainlessHandle: Investment CastStainless

HRPB-75HRPB-100HRPB-200HRPB-200HRPB-200HRPB-200HRPB-300HRPB-400HRPB-600HRPB-600

3/411-1/41-1/212-1/23468

3.865.696.276.276.276.278.488.48

35.9835.98

Ring/Pin: SteelHandle: Forged Brass

LOCKING HANDLE KIT

partnumberLHRPSS-100LHRPSS-200LHRPSS-200LHRPSS-200LHRPSS-250LHRPSS-300LHRPSS-300

11-1/41-1/222-1/234

sizelist

each18.3020.2020.2020.2020.2023.9823.98

Ring/Pin/Lock: StainlessHandle: Investment CastStainless

CAMLOCK LOCKPINS

partnumber

1/2 - 56 - 8

sizelist

each0.240.87

Plated Steel

C&G-LOCKPIN 2C&G-LOCKPIN 6

20

NEW!


DCampbell Fittings

21

c

Couplings for High-Pressure Air and Steam Hose

VITON® SEAL GROUND JOINT COUPLINGS,

AIR HAMMER COUPLINGS, AND MALE STEMSFeatures & Benefits• Viton® Seal Couplings pass 1000 hour MIL-H-29210 steam test.• Eliminates leaks with hand-tightened nut.• DuPont Viton® seal on hose stem is formulated for high pressure

steam and air applications. • Interchangeable with old-style ground joint couplings.• Machined from carbon steel, cast ductile iron (meets ASTM A395

specification), and 316 stainless steel. *See picture on right.

STAKED-ON FERRULE FOR STEAM HOSEFeatures & Benefits• Designed specifically for certain hose brands. Check with factory for information.• Viton® Seal Couplings pass 1000 hour MIL-H-29210 steam test.• Crimped steam assemblies eliminate the need for retightening bolts.• Eliminates leaks and cuts costs caused by leaky clamps.• Ferrule serrations bite to the wire achieving electrical continuity.• Meets 250 PSI pressure rating for steam applications.

SWIVEL INTERLOCKING MALE STEMFeatures & Benefits• Designed for use with steam.• Available with staked-on ferrule for crimped steam applications.

HEATWAVE GROUND JOINT COUPLING SYSTEMFeatures & Benefits• Engineered to solve hose retention safety issues created by excessively high temperatures.• One piece coupling/ferrule design.• Machined ferrule utilizes a wave pattern, which gently displaces the hose evenly while

pressing the tube into the coupling serrations. Recommended Use• Install one length of HeatWave Hose System at the compressor outlet to dissipate

heat. Then attach standard crimped air hoses from the HeatWave System to the tools. *See drawing below.

INTERLOCKING U-BOLT CLAMPSFeatures & Benefits• 360° design wraps completely around hose for superior retention.• Clamps fit hoses tightly without cracking, eliminating costly rework.• Bolts on “up side” allow easier tightening/retightening and improve “dragability”.• Field repairable.

Interlock Groove

Smooth End Detail

Viton O-RingStem

Permanently-attached Ferrule

Steam Hose

Spud

Low Profile Swivel Nut

D

The Wave

COMPRESSORTOOL

HeatWaveCouplings Viton® Seal Groud Joint Couplings & Ferrules

Campbell Crimpnology™ offers hose assembly systems for your high-pressure steam and air applications.


Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4

Viton® Ground Joint/Air Hammer/Male Stem U-Bolt Clamp Rubber/Steam 1500 1250 1250 1250 1250 1250 800 500 500

Viton® Ground Joint/Male Stem Staked-on Ferrule Steam 1250 1250 1250 - - call - call -

Viton® Ground Joint/Air Hammer/Male Stem Long Ferrule Rubber 1000 1000 1000 1000 1000 1000 650 500 500

HeatWave Coupling/HW Male Staked-on Ferrule Rubber - - - - - call - call -

See footnotes 1 and 2 on Page 122

NEW!

D

DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of compressed air and steam, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our Ground Joint Viton® Seal Couplings and U-Bolt Clamps to only those distributors authorized by Campbell Fittings. Please contact our Customer Service department for more information.

VITON® SEAL GROUND JOINT COUPLINGS

FEMALE SET(with low-profile nut)

partnumberRGJF-2RGJF-3RGJF-4RGJF-5RGJF-6RGJF-8RGJF-10RGJF-12RGJF-16

1/23/411-1/41-1/222-1/234

hosesize

listeach33.7042.3842.3875.0672.0386.76

227.17231.02523.98

Steel/Ductile Iron

RGJFSS-2RGJFSS-3RGJFSS-4

1/23/41

268.43278.48308.32

316 Stainless

FEMALE SET(with wing nut)

partnumberGJF-2GJF-3GJF-4GJF-5GJF-6GJF-8GJF-10GJF-12GJF-16

1/23/411-1/41-1/222-1/234

hosesize

listeach33.5441.9742.3875.0672.0388.44

224.96225.88494.72

Steel/Ductile Iron

VITON® SEAL HOSE STEM(staked-on ferrule & low profile nut)

partnumberRGJS-2**RGJS-3**RGJS-4**RGJS-6**RGJS-8**

1/23/411-1/22

hosesize

listeach

**********

Steel

VITON® SEAL HOSE STEM(staked-on ferrule & wing nut)

partnumber

hosesize

listeach

SteelINTERLOCKING MALE STEM

partnumberIMS-2IMS-2X3IMS-3X2IMS-3IMS-3X4IMS-4X3IMS-4

1/2 1/2 X 3/43/4 X 1/23/4 3/4 X 11 X 3/41

npt xhose

listeach6.77

15.3319.5310.3823.9123.4915.19

Steel

IMS-5IMS-6IMS-8IMS-10IMS-12IMS-16

1-1/41-1/222-1/234

24.0326.2736.5666.9691.33

160.73

Machined Ductile Iron

IMSS-2IMSS-3IMSS-4

1/23/41

66.1567.2068.25

316 Stainless

Viton® should never be used with ammonia.. Please contact

our Engineering department for information on all our different

gasket materials.

**Contact Customer Service for part numbers, prices, and availability

RGJSS-2**RGJSS-3**RGJSS-4**

1/23/41

******

316 Stainless

GJS-2**GJS-3**GJS-4**GJS-6**GJS-8**

1/23/411-1/22

**********

INTERLOCKING MALE STEM(with staked-on ferrule)

partnumberIMS-2**IMS-3**IMS-4**IMS-6**IMS-8**

1/23/411-1/22

hosesize

listeach

**********

Steel

IMSS-3**IMSS-4**

3/41

****

316 Stainless

SWIVEL MALE STEM(with staked-on ferrule for use with steam)

partnumberIMS-3**SWIMS-4**SW

3/41

hosesize

listeach

****

Steel

IMSS-3**SW3/4 **316 Stainless

SWIVEL MALE STEM(for use with steam)

partnumberIMS-3SW3/4

hosesize

listeach39.40

Plated Steel



Viton® Ground Joint/Air Hammer/Male Stem U-Bolt Clamp Rubber/Steam 1500 1250 1250 1250 1250 1250 800 500 500

Viton® Ground Joint/Male Stem Staked-on Ferrule Steam 1250 1250 1250 - - call - call -

Viton® Ground Joint/Air Hammer/Male Stem Long Ferrule Rubber 1000 1000 1000 1000 1000 1000 650 500 500

HeatWave Coupling/HW Male Staked-on Ferrule Rubber - - - - - call - call -

partnumberGJF-8 HWGJF-12 HW

23

hosesize

listeach

224.18518.17

Steel/Ductile Iron

HEATWAVE FEMALE SET (staked-on ferrule & wing nut)

HEATWAVE MALE STEM(with staked-on ferrule)

partnumberIMS-8 HWIMS-12 HW

23

hosesize

listeach

142.83383.63

Steel/Ductile Iron

23

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

VITON® SEAL MALE END(Viton® Seal x male npt)

partnumberGJMS-3GJMS-4GJMS-6GJMS-8

3/411-1/22

nptsize

listeach52.5952.5985.9492.43

Plated Steel

GJMSS-3GJMSS-4

3/41

143.82268.10

316 Stainless

VITON® SEAL FEMALE END(Viton® Seal x female npt)

partnumberGJFS-33/4

nptsize

listeach

107.85

Plated Steel

FEMALE SPUD

partnumberGFS-2GFS-3GFS-4

1/23/41

nptsize

listeach17.8714.1614.16

Steel

GFS-5GFS-6GFS-8GFS-8X3GFS-10GFS-12GFS-16

1-1/41-1/222 X 3/42-1/234

31.1129.4332.9154.6388.8477.83

168.78


GFSS-2GFSS-3GFSS-4

1/23/41

81.5088.3290.00

316 Stainless

MALE SPUD

partnumberGMS-2GMS-3GMS-4

1/23/41

nptsize

listeach23.5922.2823.43

Steel

GMS-5GMS-6GMS-8GMS-10GMS-12

1-1/41-1/222-1/23

53.3251.3754.11

133.12140.55


DOUBLE SPUD

partnumberGDS-2GDS-3GDS-3

1/23/41

sizelist

each38.7736.1436.14

Steel

GDS-5GDS-5GDS-8GDS-10GDS-12

1-1/41-1/222-1/23

64.6264.6264.54

137.32145.39


SOCKET WELD SPUD

partnumberGWSS-3GWSS-4

3/41

sizelist

each88.3290.00

316 Stainless

LOW PROFILE NUT

partnumberRGN-2RGN-3RGN-3RGN-5RGN-5RGN-8RGN-10RGN-12RGN-16

1/23/411-1/4 1-1/222-1/234

sizelist

each5.799.449.44

14.6914.6916.4168.6459.79

169.62


RGNSS-2RGNSS-3RGNSS-3

1/23/41

85.1895.7195.71

316 Stainless

WING NUT

partnumberGN-2GN-3GN-3GN-5GN-5GN-8GN-10GN-12GN-16

1/23/411-1/41-1/222-1/234

sizelist

each5.799.449.44

14.6914.6916.4168.6459.79

169.62


DEAD-ENDpartnumberGDC-3GDC-3

3/41

sizelist

each55.8655.86

VITON® O-RINGpartnumberVO-2VO-3VO-3VO-5VO-5VO-8VO-10VO-12VO-16

1/23/411-1/41-1/222-1/234

sizelist

each1.021.191.192.192.193.034.636.377.04

All steel and machined ductile iron parts are zinc plated. DuPont Viton® is the best O-Ring material for couplings used in both Air and

Steam applications. For special applications, O-Rings of other

materials are available upon request.

VITON® SEAL HOSE STEM

partnumberGJS-2GJS-3GJS-4

1/23/41

hosesize

listeach10.3818.7318.73

Steel

GJS-5GJS-6GJS-8GJS-10GJS-12GJS-16

1-1/41-1/222-1/234

28.8829.5637.0761.7294.53

175.43


GJSS-2GJSS-3GJSS-4

1/23/41

96.20103.20131.19

316 Stainless

24


DHEAVY DUTY VITON® SEAL AIR HAMMER COUPLINGS

FEMALE SET(with low profile nut)

3/41

hosesize

Steel/Ductile Iron

FEMALE SET(with wing nut)

3/41

hosesize

Steel/Ductile Iron

partnumberRHJF-3RHJF-4

listeach59.3654.44

partnumberHJF-3HJF-4

listeach62.3354.44

HOSE STEM

3/41

hosesize

SteelpartnumberHJS-3HJS-4

listeach20.9717.40

FEMALE SPUD

partnumberHFS-3HFS-4

3/41

nptsize

listeach26.2423.12

Steel

MALE SPUD

partnumberHMS-3HMS-4

3/41

nptsize

listeach37.1134.84

Steel

LOW PROFILE SWIVEL NUT

partnumberRHN-3RHN-3

3/41

sizelist

each14.8914.89

Ductile Iron

WING NUT

partnumberHN-3HN-3

3/41

sizelist

each13.9213.92

Ductile Iron

DOUBLE SPUD

partnumberHDS-3HDS-3

3/41

sizelist

each34.3934.39

Steel

25

CASTING•

HOSE•

FITTING•

LINER•

U-BOLT

This 2” 1000 psi rated hose exploded in a test at 5200 psi. The hose exceeded its minimum 4X safety factor. The fitting and clamp exceeded the capacity of the hose.

INTERLOCKING U-BOLT CLAMPS SINGLE U-BOLT

13/161-1/161-3/32

hoseo.d. min

listeach8.49

10.9910.99

partnumberIC-2IC-3SIC-3

1-1/321-1/41-3/8

hoseo.d. max

1/23/43/4

hosesize

DOUBLE U-BOLT

1-5/161-1/21-9/161-15/162-3/162-11/322-11/1633-9/32

hoseo.d. min

listeach18.6718.9431.0326.2528.6239.5035.8652.6867.49

partnumberIC-4IC-4LIC-5IC-6IC-6LIC-8IC-8LIC-10IC-10L

1-1/21-11/1622-3/162-3/82-11/162-15/163-9/323-9/16

hoseo.d. max

111-1/41-1/21-1/2222-1/22-1/2

hosesize

TRIPLE U-BOLT

3-5/163-11/164-1/164-5/164-11/165-1/167-11/16

hoseo.d. min

listeach77.5983.63

116.67221.87232.34381.01420.23

partnumberIC-12SIC-12IC-12LIC-16SIC-16IC-16LIC-24L

3-3/44-1/84-1/24-3/45-1/85-1/28-1/4

hoseo.d. max

3334446

hosesize

For your convenience, U-Bolts are available in bulk packages, upon request. Bulk package price is the same as listed above. (IC-2 through IC-4L are packed 25 per carton. IC-5 through IC-8L are packed 10 per carton.)

26


WHIP CHEK™ SAFETY CABLE(hose to hose)

listeach26.0826.0826.0840.7440.7440.7440.7499.17

partnumberWC-1WC-1WC-1WC-2WC-2WC-2WC-2WC-4

1/23/411-1/41-1/2234

hosesize

ECampbell Fittings

27

c

Couplings & Safety Couplings for Air and Water Hose

CAMPBELL SINGLE-LOCK (Bowes-style) DOUBLE-LOCK (Thor-style) COUPLINGS

Features and Benefits• High strength zinc-aluminum

alloy sleeves never rust, never seize or gall.

• Crimpnology hose ends provide the ultimate in hose retention.

• Interchangeable with other Bowes and Thor style couplings.

CAMPBELL SINGLE-LOCK (Nitrogen) DOUBLE-LOCK (Nitrogen) COUPLINGS

Features and Benefits• High strength zinc-aluminum

alloy sleeves never rust, never seize or gall.

• Crimpnology hose ends provide the ultimate in hose retention..

• Interchangeable with other Bowes and Thor style couplings.

UNIVERSAL COUPLINGS AND UNIVERSALOCK™ COUPLINGS

Features and Benefits• Mates with domestic and

imported Universal Couplings.• UniversaLock’s automatically

lock onto mating coupling.• Crimpnology hose end for

superior retention and sealing.• Cast ductile iron meets

ASTM A536 specification.• Washers manufactured from

nitrile for superior oil resistance.

Investment Cast Universal Hose Ends• Investment casting provides

a crisp, high quality, hose-end surface-finish, without costly machining.

• Crimpnology hose ends for superior retention and sealing.

Nitrogen Kills!

Nitrogen-only Single-Lock and Double-Lock Couplings.

Specify the patented yellow ring!

Simply the best and safest way to avoid deadly nitrogen

accidents in plants.

Campbell Crimpnology™ offers hose assembly systems for all your air applications.

SAFETY AND SAVINGS!

UniversaLock™, Single-Lock and Double-Lock couplings meet

OSHA regulation 29CFR1915.131 and MSHA 30 CFR65.13021

requirements for Air Hose Couplings. The fine for an

unpinned/unlocked air hose coupling can be $800 or more

per infraction. Save your customer money and headaches,

by using Campbell’s Safety Air Hose Couplings.

Investment Cast Universal Hose Ends:

E


Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1/2 3/4 1

UniversaLock™ Ferrule Air 300* 300* 300*

Universal Ferrule Air 150 150 150

Single-Lock Cplg Ferrule Air 300 300 300

Double-Lock Cplg Ferrule Air 300 300 300

See footnotes 1, 2 and 6 on Page 1*Only when connected to another UniversaLock coupling

UL RECOGNIZED

Patent no. 5,779,277

28

Patented Nitrogen Ring

Short, Crimp Specific Shank

Standard Shank

c

UNIVERSAL COUPLINGS(includes safety clip)

HOSE END

Ductile Iron (machined serrations)

partnumberUH-38UH-2UH-58UH-3UH-4

3/81/25/83/41

hosesize

listeach10.747.59

10.887.61

10.68

ctnqty2525252525

Plated Steel(investment cast)

UH-2iUH-3iUH-4i

1/23/41

5.825.927.70

252525

316 Stainless(machined serrations)

UHSS-2UHSS-3UHSS-4

1/23/41

57.9148.6753.82

252525

HOSE END (crimp specific)

Plated Steel(investment cast)

partnumberUH-3C3/4

hosesize

listeach5.19

ctnqty25

FEMALE NPT

Ductile IronpartnumberUF-38UF-2UF-3UF-4

3/81/23/41

nptsize

listeach9.548.768.56

10.62

ctnqty25252525

316 StainlessUFSS-2UFSS-3UFSS-4

1/23/41

60.2452.2156.24

252525

MALE NPT

Ductile IronpartnumberUM-38UM-2UM-3UM-4

3/81/23/41

nptsize

listeach9.358.458.659.20

ctnqty25252525

316 StainlessUMSS-2UMSS-3UMSS-4

1/23/41

60.2452.2156.24

252525

IMPORT DUCTILE IRONUNIVERSAL COUPLINGS(includes safety clip)

HOSE ENDpartnumberHE-37HE-50HE-75HE-100

3/81/23/41

hosesize

listeach4.074.074.445.61

FEMALE NPTpartnumberFE-25FE-37FE-50FE-75FE-100

1/43/81/23/41

nptsize

listeach4.974.974.754.875.51

MALE NPTpartnumberME-25ME-37ME-50ME-75ME-100

1/43/81/23/41

nptsize

listeach4.734.734.524.645.45

UNIVERSAL WASHER

NitrilepartnumberUGAll

sizelist

each0.75

ctnqty25

CLIP

partnumberCLIPAll

sizelist

each0.37

ctnqty25

E

ctnqty2525252525

ctnqty25252525

ctnqty2525252525

HOSE END

Ductile Iron (machined serrations)

partnumberULH-2ULH-3ULH-4

1/23/41

hosesize

listeach29.1929.1929.76

ctnqty101010

MALE END

Ductile Iron partnumberULM-2ULM-3ULM-4

1/23/41

nptsize

listeach29.1929.1929.76

ctnqty101010

FEMALE END

Ductile Iron partnumberULF-2ULF-3

1/23/4

nptsize

listeach29.1929.19

ctnqty1010

UNIVERSALOCK™ WASHER

NitrilepartnumberULWAll

sizelist

each2.75

ctnqty25

Never use UniversaLock™ Washers in standard Universal Couplings.

DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of compressed air, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our UniversaLock® Couplings to only those distributors authorized by Campbell Fittings.

Please contact our Customer Service department for more information.

UNIVERSALOCK™ COUPLINGS

29

Plated Steel

SINGLE-LOCK COUPLINGS (Bowes interchange)

MALE X HOSE

partnumberBMHS-2BMHS-3

1/23/4

hosesize

listeach23.8823.88

Plated Steel

BMHB-2BMHB-3

1/23/4

40.2140.21

Brass

MALE X MALE NPT

partnumberBMMS-2BMMS-3

1/23/4

nptsize

listeach24.6824.68

Plated Steel

BMMB-2BMMB-3

1/23/4

36.0736.07

Brass

MALE X FEMALE NPT

partnumberBMFS-2BMFS-3

1/23/4

nptsize

listeach23.8823.88

Plated Steel

BMFB-2BMFB-3

1/23/4

37.6137.61

Brass

FEMALE X HOSE

partnumberBFHS-2BFHS-3

1/23/4

hosesize

listeach19.3519.35

Plated Steel

BFHB-2BFHB-3

1/23/4

28.9428.94

Brass

FEMALE X MALE NPT

partnumberBFMS-2BFMS-3BFMS-4

1/23/41

nptsize

listeach19.3519.3522.22

Plated Steel

BFMB-2BFMB-3BFMB-4

1/23/41

28.9428.9433.28

Brass

FEMALE X FEMALE NPT

partnumberBFFS-2BFFS-3BFFS-4

1/23/41

nptsize

listeach19.3519.3522.22

Plated Steel

BFFB-2BFFB-3BFFB-4

1/23/41

28.9428.9433.28

Brass

MALE X HOSE(with locking ring)

partnumberBMHS-2LBMHS-3LBMHS-4L

1/23/41

hosesize

listeach32.7232.7236.65

Plated Steel

BMHB-2LBMHB-3LBMHB-4L

1/23/41

43.8643.8649.43

Brass

MALE X MALE NPT(with locking ring)

partnumberBMMS-2LBMMS-3LBMMS-4L

1/23/41

nptsize

listeach32.7232.7237.62

Plated Steel

BMMB-2LBMMB-3LBMMB-4L

1/23/41

43.8643.8649.43

Brass

MALE X FEMALE NPT(with locking ring)

partnumberBMFS-2LBMFS-3LBMFS-4L

1/23/41

nptsize

listeach32.7232.7237.62

Plated Steel

BMFB-2LBMFB-3LBMFB-4L

1/23/41

43.8643.8649.43

Brass

GASKET

partnumberBGN-1ALL

sizelist

each1.39

Nitrile

DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of Nitrogen, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our Nitrogen Couplings to only those distributors authorized by Campbell Fittings.


SINGLE-LOCK COUPLINGS (for Nitrogen use only)

MALE X HOSE(with Nitrogen ring)

partnumberBMHS-2NBMHS-3NBMHS-4N

1/23/41

hosesize

listeach32.7232.7236.65

Plated Steel

BMHB-2NBMHB-3NBMHB-4N

1/23/41

43.8643.8649.43

Brass

30


EMALE X MALE NPT(with Nitrogen ring)

partnumberBMMS-2NBMMS-3NBMMS-4N

1/23/41

nptsize

listeach32.7232.7237.62

Plated Steel

BMMB-2NBMMB-3NBMMB-4N

1/23/41

32.7232.7249.43

Brass

MALE X FEMALE NPT(with Nitrogen ring)

partnumberBMFS-2NBMFS-3NBMFS-4N

1/23/41

nptsize

listeach32.7232.7237.62

Plated Steel

BMFB-2NBMFB-3NBMFB-4N

1/23/41

43.8643.8649.43

Brass

FEMALE X HOSE(with Nitrogen ring)

partnumberBFHS-2NBFHS-3N

1/23/4

hosesize

listeach19.3519.35

Plated Steel

BFHB-2NBFHB-3N

1/23/4

28.9428.94

Brass

FEMALE X MALE NPT(with Nitrogen ring)

partnumberBFMS-2NBFMS-3N

1/23/4

hosesize

listeach19.3519.35

Plated Steel

BFMB-2NBFMB-3N

1/23/4

28.9428.94

Brass

FEMALE X FEMALE NPT(with Nitrogen ring)

partnumberBFFS-2NBFFS-3N

1/23/4

hosesize

listeach19.3519.35

Plated Steel

BFFB-2NBFFB-3N

1/23/4

28.9428.94

Brass

DOUBLE-LOCK COUPLINGS (Thor interchange)

HOSE END

partnumberTLH-2TLH-3TLH-4

1/23/41

hosesize

listeach35.2337.2256.71

Plated Steel

TLHSS-33/4 315.45Stainless

TLHB-33/4 82.73Brass

MALE NPT

partnumberTLM-2TLM-3

1/23/4

nptsize

listeach33.1533.15

Plated Steel

TLMSS-33/4 279.64Stainless

FEMALE NPT

partnumberTLF-2TLF-3

1/23/4

nptsize

listeach37.9637.96

Plated Steel

TLFSS-33/4 279.64Stainless

MALE NPT(without locking sleeve)

partnumberTM-2TM-3TM-4

1/23/41

nptsize

listeach19.3520.3222.78

Plated Steel

TMSS-33/4 138.73Stainless

FEMALE NPT(without locking sleeve)

partnumberTF-2TF-3TF-4

1/23/41

nptsize

listeach24.6324.7426.94

Plated Steel

TFSS-33/4 138.73Stainless

FEMALE NPT(with locking ring)

partnumberTLF-2LTLF-3LTLF-4L

1/23/41

hosesize

listeach50.4950.4961.60

Plated Steel

HOSE END(with locking ring)

partnumberTLH-2LTLH-3LTLH-4L

1/23/41

hosesize

listeach46.8649.5075.42

Plated Steel

MALE NPT(with locking ring)

partnumberTLM-2LTLM-3LTLM-4L

1/23/41

hosesize

listeach44.0944.0961.60

Plated Steel

31

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

DOUBLE-LOCK COUPLINGS (for Nitrogen use only)

DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of Nitrogen, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our Nitrogen Couplings to only those distributors authorized by Campbell Fittings.


HOSE END(with Nitrogen ring)

partnumberTLH-2NTLH-3NTLH-4N

1/23/41

hosesize

listeach46.8649.5075.42

Plated Steel

TLHB-3N3/4 103.25Brass

MALE NPT(with Nitrogen ring)

partnumberTLM-2NTLM-3NTLM-4N

1/23/41

hosesize

listeach44.0944.0961.60

Plated Steel

FEMALE NPT(with Nitrogen ring)

partnumberTLF-2NTLF-3NTLF-4N

1/23/41

hosesize

listeach50.4950.4961.60

Plated Steel

MALE NPT(with Nitrogen ring &without locking sleeve)

partnumberTM-2NTM-3NTM-4N

1/23/41

nptsize

listeach24.19 25.40 28.48

Plated Steel

FEMALE NPT(with Nitrogen ring &without locking sleeve)

partnumberTF-2NTF-3NTF-4N

1/23/41

nptsize

listeach

30.79 30.93 33.68

Plated Steel

GASKET

partnumberTGN-1ALL

sizelist

each2.63

Nitrile

32

NEW!

NEW!


NEW!

NEW!

NEW!

FCampbell Fittings

33

c

CHEMJOINT™ COUPLINGS & MALE STEMS

DescriptionChemJoint™ Couplings and Male Stems create an extremely versatile Chemical Hose assembly system. The system solves problematic Cam and Groove issues such as pressure, temperature, side load, viscosity, line dedication and ergonomics.

Features and Benefits• Graduated serration pattern

- sharper near the interlock, rounder near the end. Grips and seals plastic lined Chemical Hose without cutting through the tube.

• 360° interlock groove on fitting locks ferrule into place for the ultimate in holding power.

• Crimped assemblies are low profile and eliminate sharp edges from bands.

• Viton® Seal allows coupling to meet pressure ratings with hand-tightened nut.

Recommended Hose Attachment• Interlocking ferrules• Preformed bands

Fittings & Couplings for High, Medium, and Low Pressure Chemical Hose

Campbell Crimpnology™ offers hose assembly systems for all your chemical applications!

1” ChemJoint™ Coupling Set

ChemJoint Couplings are available with weld ends for

use with metal hose.

F



ChemJoint™/Male Stem Ferrule Chemical 350 400 450 325 250 250 225 225 200

ChemJoint™/Male Stem Ferrule Rubber 350 400 450 425 400 350 325 300 250


34

1” ChemJoint™ Union with Viton® Spud

c

CHEMJOINT™ COUPLINGS

DISTRIBUTOR AUTHORIZATION

Safety is of paramount concern to everyone. Due to the volatile nature of chemical hose applications, and in accordance with our ISO 9001 system, we reserve the right to restrict sales of our ChemJoint™ Couplings and Male Stems to only those distributors authorized by Campbell Fittings.

Please contact our Customer Service department for more information

CHEMJOINT™ MALE STEM

316 Stainless

1/23/411-1/41-1/222-1/234

CJMS-2CJMS-3CJMS-4CJMS-5CJMS-6CJMS-8CJMS-10CJMS-12CJMS-16

43.7943.7952.5361.2868.2875.29

119.08153.70227.10

hose size

partnumber

listeach

3/411-1/223

CJSS-3CJSS-4CJSS-6CJSS-8CJSS-12

337.93337.93418.50569.07

1024.32

hose size

partnumber

listeach

CHEMJOINT™ FEMALE VITON® SPUD

3/411-1/223

CJVS-3CJVS-4CJVS-6CJVS-8CJVS-12

131.33131.33193.10262.65507.78

nptsize

partnumber

listeach

316 Stainless

316 Stainless

316 Stainless with ACME threads123

CJVS-4ACJVS-8ACJVS-12A

165.90326.55633.94

CHEMJOINT™ HOSE STEM

316 Stainless

3/411-1/223

CJHS-3CJHS-4CJHS-6CJHS-8CJHS-12

113.82113.82117.07122.57169.82

hose size

partnumber

listeach

CHEMJOINT™ WELD-ON STEM

316 Stainless

11-1/223

CJWS-4CJWS-6CJWS-8CJWS-12

105.08108.09113.82140.07

sizepartnumber

listeach

CHEMJOINT™ MALE THREADED STEM

316 Stainless

11-1/223

CJTS-4CJTS-6CJTS-8CJTS-12

113.82117.07122.57169.82

nptsize

partnumber

listeach

CHEMJOINT™ UNION WITH VITON® SPUD

316 Stainless

3/411-1/223

CJFU-3CJFU-4CJFU-6CJFU-8CJFU-12

569.07627.10718.15831.71

1120.63

nptsize

partnumber

listeach

CHEMJOINT™ COUPLING FEMALE SET

F



ChemJoint™/Male Stem Ferrule Chemical 350 400 450 325 250 250 225 225 200

ChemJoint™/Male Stem Ferrule Rubber 350 400 450 425 400 350 325 300 250

35

Viton® should never be used with ammonia.. Please contact

our Engineering department for information on all our different

gasket materials.

NEW!

CHEMJOINT™ UNION (without Viton® Spud)

316 Stainless

3/411-1/223

CJFS-3CJFS-4CJFS-6CJFS-8CJFS-12

437.77495.27525.27569.07612.84

nptsize

partnumber

listeach

316 Stainless with ACME threads

123

CJFS-4ACJFS-8ACJFS-12A

620.55664.65722.55

npt size

partnumber

listeach

CHEMJOINT™ NUT

316 Stainless

3/411-1/223

CJN-3CJN-3CJN-6CJN-8CJN-12

89.4589.45

156.72183.83346.70

sizepartnumber

listeach


123

CJN-4ACJN-8ACJN-12A

108.15196.35398.71

npt size

partnumber

listeach

CHEMJOINT™ DUST CAP

316 Stainless

3/411-1/223

CJDC-3CJDC-3CJDC-6CJDC-8CJDC-12

87.5587.55

155.12175.12350.21

sizepartnumber

listeach


123

CJDC-4ACJDC-8ACJDC-12A

131.25182.70446.25

npt size

partnumber

listeach

CHEMJOINT™ VITON® SEAL DUST PLUG

316 Stainless

3/411-1/223

CJDP-3CJDP-3CJDP-6CJDP-8CJDP-12

125.11125.11210.18318.66573.95

sizepartnumber

listeach


123

CJDP-4ACJDP-8ACJDP-12A

173.25392.70656.25

npt size

partnumber

listeach

36


NEW!

NEW!

NEW!

NEW!

GCampbell Fittings

37

c

Campbell Crimpnology™ offers hose assembly systems for all your food grade hose applications!

Campbell Sanitary serration pattern

Ferrule interlock groove (for standard ferrules or machined ferrules)

Ferrule stopBumper location

Tri-Clamp end

TESTINGAll Campbell products are thoroughly tested to determine accurate performance data, such as pressure ratings and temperature derating data. See example of Tri-Clamp hydrostatic test below.

Hose: 1” ContiTech Grey VintnerWorking Pressure: 250 psiTest temp: 70°FHighest Test Pressure: 2039 psi.Failure Mode: Hose burst beyond 8x WP

Sanitary and PCT Couplings for Food and Beverage

CRIMPNOLOGYTRI-CLAMP FITTINGSFeatures & Benefits

• Crimp specs and procedures provided for all styles.

• For use with both Campbell standard slotted ferrules or I.D./O.D. machined ferules.

• All ferrules are FDA approved 304 Stainless Steel.

• Shank and ferrule lengths are matched for performance and to avoid potential hose tube or hose cover damage.

• FDA approved Bumper helps to protect Tri-Clamp fitting.

• Recessed bumper area machined onto fitting allows easy installation or removal, even when in use.

TRI-CLAMP GASKETSFeatures & Benefits• Available in both Buna-N and

reinforced silicone.• Reinforced silicone offers superior

sealing capabilities.

TRI-CLAMPSFeatures & Benefits• Designed for use with any

Tri-Clamp fitting.

PROTECTIVE BUMPERFeatures & Benefits• Fits into machined recessed

bumper area on all Campbell Tri-Clamp and Wine Fittings.

• Easy on/off installation.• Manufactured from FDA

approved silicone.

CRIMPNOLOGYWINE FITTINGS(with Pacific Coast Threads - PCT)Features & Benefits• Crimp specs and procedures

provided for all styles.• For use with Campbell ferrules and

sleeves or band clamps.• All ferrules and sleeves are FDA

approved 304 Stainless Steel.• Shank and ferrule lengths are

matched for performance and to avoid potential hose tube or hose cover damage.

• Durable heavy duty forged brass Swivel Nut is damage resistant.

G


Hose System Componenets Hose SizeFitting/Coupling Attachment Hose Type 1 1-1/4 1-1/2 2 2-1/2 3

Tri-Clamp Ferrule Sanitary 500 - 450 350 325 300

Tri-Clamp Mach. Ferrule Sanitary 500 - 500 400 375 350

Wine Fitting Ferrule Sanitary - - 450 350 - 300

Wine Fitting Band Clamps Sanitary - - 100 100 - 50


NEW!

38

TRI-CLAMP FITTINGS

304 Stainless

11-1/222-1/23

TC-4CTC-6CTC-8CTC-10CTC-12C

60.9172.42

117.42163.64236.36

hose size

partnumber

listeach

316 Stainless11-1/222-1/23

TC-4C 316TC-6C 316TC-8C 316TC-10C 316TC-12C 316

71.2178.03

135.45204.35287.88

TRI-CLAMP REDUCERS

304 Stainless

1-1/2 X 1 TCR-6X4C 60.19

hose size

partnumber

listeach

316 Stainless1-1/2 X 1 TCR-6X4C 316 71.21

TRI-CLAMP BUMPERS

Silicone

11-1/222-1/23

TCB-4TCB-6TCB-8TCB-10TCB-12

2.943.885.548.97

10.64

hose size

partnumber

listeach

TRI-CLAMP GASKET

Buna-N

11-1/222-1/23

TCGB-4TCGB-6TCGB-8TCGB-10TCGB-12

1.341.151.031.591.77

hose size

partnumber

listeach

Reinforced Silicone11-1/222-1/23

TCGS-4TCGS-6TCGS-8TCGS-10TGGS-12

4.094.284.095.696.08

MACHINED FERRULES

304 Stainless

11111-1/21-1/21-1/21-1/222222-1/22-1/22-1/233333

SAN100132SAN100138SAN100144SAN100150SAN150204SAN150210SAN150216SAN150220SAN200240SAN200244SAN200250SAN200256SAN250312 SAN250318SAN250324SAN300340SAN300348SAN300352SAN300360SAN300400

51.5251.5251.5251.5257.5857.5857.5857.5877.2777.2777.2777.27

106.06106.06106.06196.97196.97196.97196.97196.97

G

TRI-CLAMP

304 Stainless

11-1/222-1/23

TCC-6TCC-6TCC-8TCC-10TCC-12

15.5515.5516.8018.2521.00

hose size

partnumber

listeach

TRI-CLAMPFITTINGS

MACHINED FERRULES

1-32/641-38/641-44/641-50/642-4/642-10/642-16/642-20/642-40/642-44/642-50/642-56/643-12/643-18/643-24/643-40/643-48/643-52/643-60/644

hose size

partnumber

listeach

ferrulei.d.


Hose System Componenets Hose SizeFitting/Coupling Attachment Hose Type 1 1-1/4 1-1/2 2 2-1/2 3

Tri-Clamp Ferrule Sanitary 500 - 450 350 325 300

Tri-Clamp Mach. Ferrule Sanitary 500 - 500 400 375 350

Wine Fitting Ferrule Sanitary - - 450 350 - 300

Wine Fitting Band Clamps Sanitary - - 100 100 - 50 39

NEW!

NEW!

PCT WINEFITTINGS

WINE FITTING - FEMALE STEM

304 Stainless

1-1/223

PCTF-6CPCTF-8CPCTF-12C

66.5272.70

149.76

hose size

partnumber

listeach

WINE FITTING - FEMALE STEM W/ HEAVY NUT

304 Stainless

23

PCTFBH-8PCTFBH-12

208.94269.55

hose size

partnumber

listeach

WINE FITTING - MALE STEM

304 Stainless

1-1/223

PCTM-6CPCTM-8CPCTM-12C

81.1588.69

182.71

hose size

partnumber

listeach

WINE GASKET FITTING

Buna-N

1-1/223

PCTGB-6PCTGB-8PCTGB-12

2.63 4.70

10.07

hose size

partnumber

listeach

Silicone1-1/223

PCTGS-6PCTGS-8PCTGS-12

2.63 4.70

10.07

PACIFIC COAST HEAVY NUT

Brass

1-1/223

NBPCT-6NBHPCT-8NBHPCT-12

37.8856.0675.00

hose size

partnumber

listeach

WINE FERRULES

304 Stainless

333333

FSS300344WFSS300348WFSS300352WFSS300400WFSS300408WFSS300416W

28.0828.0828.0828.0828.0828.08

hose size

partnumber

listeach

3-44/643-48/643-52/6444-8/644-16/64

ferrulei.d.

40

NEW!


Note: Standard ferrules for 1-1/2” & 2” can be used for wine fittings. For 3” use the following:

HCampbell Fittings

41

c

Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems

Campbell Crimpnology™ ... the only comprehensive package of crimping products in the industry!

FERRULE & SLEEVE PART NUMBERING

F PS 150 216 L

PRODUCT F = Ferrule S = Sleeve

MATERIAL PS = Plated Steel

SS = Stainless Steel

NOMINAL HOSE SIZE 150 = 1-1/2”

200 = 2”

FERRULE/SLEEVE I.D. 216 = 2-16/64” 340 = 3-40/64”

NON-STANDARD LENGTH L = Long S = Short

Performance RatedAll Campbell pressure ratings are established and verified by hydrostatic testing to a 4x safety factor where applicable (see page 1 for pressure rating information). Test data and information regarding various combinations of hoses and fittings are available upon request.Note: Campbell sleeves may be used on non-Campbell fittings. We cannot provide crimp specifications or recommend working pressures for non-Campbell fittings. The pressure ratings in this catalog are valid only when using all Campbell parts. For safety and quality assurance, always proof test hose assembly according to NAHAD guidelines.

CampbellCrimpnology™Crimpnology refers to all of the technology involved in crimping: The integrated design of every fitting, coupling, ferrule, and sleeve; the crimp procedures; crimp specifications; and crimp training & support.

FITTING

The turn-in of the ferrule interlocks with the machined groove on the fitting or coupling, providing a mechanical attachment for exceptional hose retention.

INTERLOCK

FERRULE

HOSE

Features and BenefitsCrimpnology offers the following “7 Essentials” for crimping safe, repeatable, performance-rated hose systems:• Interlock groove on all fittings and couplings is compatible with the

turn-in end of the ferrule to ensure a 360° ferrule-to-fitting interlock.• Serrations specifically designed for crimping provide maximum hose

retention without potential tube failure.• Shank length and ferrule/sleeve length are matched to maximize

retention and to avoid hose tube or cover damage.• Detailed assembly procedures are provided, including information to

ensure use of compatible components. • Detailed crimping procedures ensure appropriate crimp specification

is derived for each hose and fitting combination.• On-site crimping training by a Hose System Specialist is offered by

Campbell Fittings to assist distributor personnel.• A daytime, toll-free “hotline” is manned by a Campbell Hose System

Specialist to assist in all aspects of crimping.

H

42

Prolongs the life of the hose assembly by relieving stress and failure points commonly found at the end of crimped fittings.

RELIEF BUMP

c

HFERRULES

FERRULESfor use with products shown below:

Plated Steel

3/43/43/43/43/41111111-1/41-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2222222222-1/22-1/22-1/22-1/22-1/2333333333344444

FPS075112FPS075120FPS075124FPS075128FPS075132FPS100132FPS100136FPS100140FPS100144FPS100148FPS100152FPS125152FPS125156FPS125160FPS150160FPS150200FPS150204FPS150208FPS150212FPS150216FPS150220FPS150224FPS200232FPS200236FPS200240FPS200244FPS200248FPS200252FPS200256FPS200260FPS250308FPS250312FPS250316FPS250320FPS250328FPS300336FPS300340FPS300344FPS300348FPS300352FPS300356FPS300360FPS300400FPS300408FPS300416FPS400436FPS400440FPS400444FPS400448FPS400452

8.098.098.098.098.09

10.0010.0010.0010.0010.0010.0010.3510.3510.3511.4011.4011.4011.4011.4011.4011.4011.4012.7412.7412.7412.7412.7412.7412.7412.7417.2217.2217.2217.2217.2217.8317.8317.8317.8317.8317.8317.8317.8317.8317.8323.4323.4323.4323.4323.43

hosesize

partnumber

listeach

1-12/641-20/641-24/641-28/641-32/641-32/641-36/641-40/641-44/641-48/641-52/641-52/641-56/641-60/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/643-8/643-12/643-16/643-20/643-28/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-8/644-16/644-36/644-40/644-44/644-48/644-52/64

ferrulei.d.

444466668888

FPS400456FPS400460FPS400500FPS400504FPS600656FPS600700FPS600708FPS600724FPS800848FPS800900FPS800916FPS800932

23.4323.4323.4323.4351.9951.9951.9951.99

112.20112.20112.20112.20

4-56/644-60/6455-4/646-56/6477-8/647-24/648-48/6499-16/649-32/64

Stainless Steel

1/21/21/23/43/43/43/43/43/41111111/41/41/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2222222222-1/22-1/22-1/22-1/22-1/233333333444444444

FSS050100FSS050104FSS050108FSS075112FSS075116FSS075120FSS075124FSS075128FSS075132FSS100132FSS100136FSS100140FSS100144FSS100148FSS100152FSS125152FSS125156FSS125160FSS150160FSS150200FSS150204FSS150208FSS150212FSS150216FSS150220FSS150224FSS200232FSS200236FSS200240FSS200244FSS200248FSS200252FSS200256FSS200260FSS250308FSS250312FSS250316FSS250320FSS250328FSS300336FSS300340FSS300344FSS300348FSS300352FSS300356FSS300360FSS300400FSS400436FSS400440FSS400444FSS400448FSS400452FSS400456FSS400460FSS400500FSS400504

9.319.319.319.659.659.659.659.659.65

10.1510.1510.1510.1510.1510.1512.0012.0012.0015.6015.6015.6015.6015.6015.6015.6015.6017.6317.6317.6317.6317.6317.6317.6317.6327.0827.0827.0827.0827.0828.9228.9228.9228.9228.9228.9228.9228.9267.1467.1467.1467.1467.1467.1467.1467.1467.14

hosesize

partnumber

listeach

11-4/641-8/641-12/641-16/641-20/641-24/641-28/641-32/641-32/641-36/641-40/641-44/641-48/641-52/641-52/641-56/641-60/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/643-8/643-12/643-16/643-20/643-28/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-4/64

ferrulei.d.

continued on next page43

NEW!

NEW!

NEW!

NEW!

Crimpnology Nipples

Section B

ChemJoint Couplings & Male Stems

Section F

Campbell Cobra

Parts C & ESection C

SanitaryTri-Clamp Section G

hosesize

partnumber

listeach

ferrulei.d.

66668

FSS600656FSS600700FSS600708FSS600724FSS800XXX

84.9284.9284.9284.92POR

6-56/6477-8/647-24/64

Plated Steel Heavy Duty(for 206S & FRAC-16C fittings only)444444

FPS400448FFPS400452FFPS400456FFPS400460FFPS400500FFPS400504F

33.2533.2533.2533.2533.2533.25

4-48/644-52/644-56/644-60/6455-4/64

FERRULESfor use with products shown below:

WARNING: NOT FOR USE WITH STEAM

Plated Steel

1/21/21/23/43/43/43/43/41111111/41/41/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2222222222-1/22-1/22-1/22-1/22-1/2

FPS050100SFPS050104SFPS050108SFPS075116FPS075120FPS075124FPS075128FPS075132FPS100132FPS100136FPS100140FPS100144FPS100148FPS100152FPS125152LFPS125156LFPS125160LFPS150160LFPS150200LFPS150204LFPS150208LFPS150212LFPS150216LFPS150220LFPS150224LFPS200232LFPS200236LFPS200240LFPS200244LFPS200248LFPS200252LFPS200256LFPS200260LFPS250308LFPS250312LFPS250316LFPS250320LFPS250328L

8.908.908.908.098.098.098.098.09

10.0010.0010.0010.0010.0010.0014.2914.2914.2917.1017.1017.1017.1017.1017.1017.1017.1020.7620.7620.7620.7620.7620.7620.7620.7628.5528.5528.5528.5528.55

hosesize

partnumber

listeach

11-4/641-8/641-16/641-20/641-24/641-28/641-32/641-32/641-36/641-40/641-44/641-48/641-52/641-52/641-56/641-60/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/643-8/643-12/643-16/643-20/643-28/64

ferrulei.d.

Long Crimpnology

Nipples Section B

Viton® Seal Ground

Joints and Male Stems

Section D

333333333344444444444

FPS300336LFPS300340LFPS300344LFPS300348LFPS300352LFPS300356LFPS300360LFPS300400LFPS300408LFPS300416LFPS400440LFPS400444LFPS400448LFPS400452LFPS400456LFPS400460LFPS400500LFPS400504LFPS400512LFPS400520LFPS400528L

28.7228.7228.7228.7228.7228.7228.7228.7228.7228.7237.8537.8537.8537.8537.8537.8537.8537.8537.8537.8537.85

3-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-8/644-16/644-40/644-44/644-48/644-52/644-56/644-60/6455-4/645-12/645-20/645-28/64

LIGHT DUTY FERRULES

LIGHT DUTY FERRULESfor use with couplings shown below:

Plated Steel

1/21/23/43/43/43/43/43/411111

FLPS050058FLPS050060FLPS075108FLPS075110FLPS075112FLPS075114FLPS075116FLPS075118FLPS100128FLPS100130FLPS100132FLPS100134FLPS100136

1.151.151.551.551.551.551.551.552.352.352.352.352.35

hosesize

partnumber

listeach

58/6460/641-8/64 1-10/64 1-12/64 1-14/64 1-16/64 1-18/64 1-28/641-30/641-32/641-34/641-36/64

ferrulei.d.

All Campbell

UniversalsSection E

Single-Lock (Bowes)Section E

UniversaLockSection E

Double-Lock (Thor)

Section E

44


NEW!

H304 Stainless

1/23/43/43/43/43/43/411111

FLSS050058FLSS075108FLSS075110FLSS075112FLSS075114FLSS075116FLSS075118FLSS100128FLSS100130FLSS100132FLSS100134FLSS100136

2.512.912.912.912.912.912.914.284.284.284.284.28

hosesize

partnumber

listeach

58/641-8/64 1-10/64 1-12/64 1-14/64 1-16/64 1-18/64 1-28/641-30/641-32/641-34/641-36/64

ferrulei.d.

SLEEVES

SLEEVESfor use with products shown below:

Plated Steel

3/43/43/43/43/41111111111/41/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2

SPS075108SPS075112SPS075116SPS075120SPS075124SPS100116SPS100120SPS100124SPS100128SPS100132SPS100136SPS100140SPS100144SPS100148SPS125156SPS125200SPS150148SPS150152SPS150156SPS150160SPS150200SPS150204SPS150208SPS150212SPS150216SPS150220SPS150224

4.814.814.814.814.814.704.704.704.704.704.704.704.704.704.794.794.834.834.834.834.834.834.834.834.834.834.83

hosesize

partnumber

listeach

1-8/641-12/641-16/641-20/641-24/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/641-56/6421-48/641-52/641-56/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/64

sleevei.d.

Standard Cobra™

Parts C & ESection C

Campbell Cobra™

Parts C & E Section C

22222222222222-1/22-1/22-1/22-1/22-1/22-1/233333333333334444444444445556666666666888888888

SPS200216SPS200224SPS200228SPS200232SPS200236SPS200240SPS200244SPS200248SPS200252SPS200256SPS200260SPS200300SPS200302SPS250300SPS250308SPS250316SPS250324SPS250332SPS250334SPS300316SPS300324SPS300328SPS300332SPS300336SPS300340SPS300344SPS300348SPS300352SPS300356SPS300360SPS300400SPS300402SPS400416SPS400424SPS400432SPS400436SPS400440SPS400444SPS400448SPS400452SPS400456SPS400460SPS400500SPS400502SPS500536SPS500548SPS500560SPS600616SPS600624SPS600632SPS600640SPS600648SPS600656SPS600700SPS600708SPS600716SPS600724SPS800816SPS800832SPS800840SPS800848SPS800900SPS800916SPS800932SPS800940SPS800948

5.705.705.705.705.705.705.705.705.705.705.705.705.708.708.708.708.708.708.70

10.2410.2410.2410.2410.2410.2410.2410.2410.2410.2410.2410.2410.2413.8013.8013.8013.8013.8013.8013.8013.8013.8013.8013.8013.8033.6933.6933.6937.8637.8637.8637.8637.8637.8637.8637.8637.8637.8665.5865.5865.5865.5865.5865.5865.5865.5865.58

2-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-2/6433-8/643-16/643-24/643-32/643-34/643-16/643-24/643-28/643-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/644 4-2/644-16/644-24/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-2/645-36/645-48/645-60/646-16/646-24/646-32/646-40/646-48/646-56/646 76 7-8/646 7-16/646 7-24/648-16/648-32/648-40/648-48/6499-16/649-32/649-40/649-48/64

45


hosesize

partnumber

listeach

sleevei.d.

3/43/43/43/43/41111111111-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/222222222222222-1/22-1/22-1/22-1/22-1/22-1/23333333333334444444444

SSS075104SSS075108SSS075112SSS075116SSS075124SSS100116SSS100120SSS100124SSS100128SSS100132SSS100136SSS100140SSS100144SSS100148SSS125156SSS125200SSS150152SSS150156SSS150160SSS150200SSS150204SSS150208SSS150212SSS150216SSS150220SSS150224SSS200216SSS200224SSS200228SSS200232SSS200236SSS200240SSS200244SSS200248SSS200252SSS200256SSS200260SSS200300SSS200302SSS250300SSS250308SSS250316SSS250324SSS250332SSS250334SSS300324SSS300328SSS300332SSS300336SSS300340SSS300344SSS300348SSS300352SSS300356SSS300360SSS300400SSS300402SSS400432SSS400436SSS400440SSS400444SSS400448SSS400452SSS400456SSS400460SSS400500SSS400502

7.787.787.787.787.787.557.557.557.557.557.557.557.557.558.538.538.478.478.478.478.478.478.478.478.478.47

11.7411.7411.7411.7411.7411.7411.7411.7411.7411.7411.7411.7411.7416.5616.5616.5616.5616.5616.5617.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0428.3328.3328.3328.3328.3328.3328.3328.3328.3328.33

1-4/641-8/64 1-12/641-16/641-24/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/641-56/6421-52/641-56/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-2/6433-8/643-16/643-24/643-32/643-34/643-24/643-28/643-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-2/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-2/64

304 Stainless6666666668

SSS600616SSS600624SSS600632SSS600640SSS600648SSS600656SSS600700SSS600708SSS600716SSS800XXX

72.5672.5672.5672.5672.5672.5672.5672.5672.56POR

6-16/646-24/646-32/646-40/646-48/646-56/6477-8/647-16/64

222222222233333333334444444444

SAL200228SAL200232SAL200236SAL200240SAL200244SAL200248SAL200252SAL200256SAL200260SAL200300SAL300332SAL300336SAL300340SAL300344SAL300348SAL300352SAL300356SAL300360SAL300400SAL300404SAL400436SAL400440SAL400444SAL400448SAL400452SAL400456SAL400460SAL400500SAL400504SAL400508

10.9510.9510.9510.9510.9510.9510.9510.9510.9510.9516.5516.5516.5516.5516.5516.5516.5516.5516.5516.5522.1622.1622.1622.1622.1622.1622.1622.1622.1622.16

2-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-4/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-4/645-8/64

Aluminum

SLEEVESfor use with products shown below:

Plated Steel

1/23/43/43/43/43/4111111

SPS050100SSPS075108SSPS075112SSPS075116SSPS075120SSPS075124SSPS100128SSPS100132SSPS100136SSPS100140SSPS100144SSPS100148S

4.874.904.904.904.904.904.704.704.704.704.704.70

hosesize

partnumber

listeach

11-8/641-12/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/64

sleevei.d.

Combination Nipples

Section A

Suction Hose Couplings Section A

Ball & Socket Couplings Section A

46


SLEEVES (continued from previous page)

NEW!

H

1-1/41-1/41-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/222222222222222-1/22-1/22-1/22-1/22-1/22-1/22-1/23333333333333444444444445556666666666

SPS125140SSPS125148SSPS125152SSPS125156SSPS150160SSPS150200SSPS150204SSPS150208SSPS150212SSPS150216SSPS150220SSPS150224SSPS200208SSPS200216SSPS200224SSPS200228SSPS200232SSPS200236SSPS200240SSPS200244SSPS200248SSPS200252SSPS200256SSPS200260SSPS200300SSPS250248SSPS250256SSPS250300SSPS250308SSPS250316SSPS250324SSPS250332SSPS300308SSPS300316SSPS300324SSPS300328SSPS300332SSPS300336SSPS300340SSPS300344SSPS300348SSPS300352SSPS300356SSPS300360SSPS300400SSPS400416SSPS400424SSPS400432SSPS400436SSPS400440SSPS400444SSPS400448SSPS400452SSPS400456SSPS400460SSPS400500SSPS500536SPS500548SPS500560SPS600616SPS600624SPS600632SPS600640SPS600648SPS600656SPS600700SPS600708SPS600716SPS600724

4.944.944.944.944.944.944.944.944.944.944.944.94 5.995.995.995.995.995.995.995.995.995.995.995.995.998.188.188.188.188.188.188.18

10.0410.0410.0410.0410.0410.0410.0410.0410.0410.0410.0410.0410.0413.5313.5313.5313.5313.5313.5313.5313.5313.5313.5313.5333.6933.6933.6937.8637.8637.8637.8637.8637.8637.8637.8637.8637.86

1-40/641-48/641-52/641-56/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-8/642-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6432-48/642-56/6433-8/643-16/643-24/643-32/643-8/643-16/643-24/643-28/643-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-16/644-24/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-36/645-48/645-60/646-16/646-24/646-32/646-40/646-48/646-56/6477-8/647-16/647-24/64

888888888101010101010101212

SPS800816SPS800832SPS800840SPS800848SPS800900SPS800916SPS800932SPS800940SPS800948SPS101032SPS101048SPS101056SPS101100SPS101116SPS101132SPS101148SPS121232SPS121248

65.5865.5865.5865.5865.5865.5865.5865.5865.5890.9090.9090.9090.9090.9090.9090.90

141.11141.11

8-16/648-32/648-40/648-48/6499-16/649-32/649-40/649-48/6410-32/6410-48/6410-56/641111-16/6411-32/6411-48/6412-32/6412-48/64

304 Stainless1/23/43/43/43/43/43/43/4111111-1/41-1/41-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/22222222222222-1/22-1/22-1/22-1/22-1/2

SSS050100SSSS075104SSSS075108SSSS075112SSSS075116SSSS075120SSSS075124SSSS075128SSSS100132SSSS100136SSSS100140SSSS100144SSSS100148SSSS125140SSSS125148SSSS125152SSSS125156SSSS150150SSSS150200SSSS150204SSSS150208SSSS150212SSSS150216SSSS150220SSSS150224SSSS200208SSSS200216SSSS200224SSSS200228SSSS200232SSSS200236SSSS200240SSSS200244SSSS200248SSSS200252SSSS200256SSSS200260SSSS250300SSSS250308SSSS250316SSSS250324SSSS250332S

7.427.427.427.427.427.427.427.427.427.427.427.427.428.848.848.848.848.848.848.848.848.848.848.848.84

12.7012.7012.7012.7012.7012.7012.7012.7012.7012.7012.7012.7016.5616.5616.5616.5616.56

11-4/641-8/641-12/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/641-40/641-48/641-52/641-56/641-50/6422-4/642-8/642-12/642-16/642-20/642-24/642-8/642-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-8/643-16/643-24/643-32/64

333333333333344444444444666666666681012

SSS300308SSSS300316SSSS300324SSSS300328SSSS300332SSSS300336SSSS300340SSSS300344SSSS300348SSSS300352SSSS300356SSSS300360SSSS300400SSSS400416SSSS400424SSSS400432SSSS400436SSSS400440SSSS400444SSSS400448SSSS400452SSSS400456SSSS400460SSSS400500SSSS600616SSS600624SSS600632SSS600640SSS600648SSS600656SSS600700SSS600708SSS600716SSS600724SSS800XXXSSS101XXXSSS121XXX

17.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0428.3328.3328.3328.3328.3328.3328.3328.3328.3328.3328.3372.5672.5672.5672.5672.5672.5672.5672.5672.5672.56PORPORPOR

3-8/643-16/643-24/643-24/643-28/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-16/644-24/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6456-16/646-24/646-32/646-40/646-48/646-56/6477-8/647-16/647-24/64

47

hosesize

partnumber

listeach

sleevei.d.

NEW!

NEW!

NEW!

NEW!NEW!

48

Crimp Chart: a chart designed to assist in determining the crimp spec, which includes allowances for serration style, fitting and ferrule/sleeve O.D. and design.Crimp Spec (or specification): the outside diameter of the ferrule/sleeve after assembling and crimping.Cut-slots: notches cut into the turned-in end of a ferrule that allows the interlock portion to crimp straight down into the fitting interlock without opening outward during crimping.

Ferrule: a tube-like product with one end turned in, so as to affect an interlock into a groove on a mating fitting or coupling.Ferrule Length: the overall length of the ferrule as measured from the turn-in end to the open end.Ferrule/Sleeve I.D.: the inside bowl diameter of the ferrule; the inside diameter of the sleeve; the inside diameter of either where the hose is placed.Gauge: the thickness of the ferrule/sleeve material.

Interlock Groove: a groove designed into the fitting/coupling to accept the turn-in end of the ferrule.Shank Length: the hose barb area measured from the end of the fitting to the interlock groove.Sleeve: a tube-like product with no interlock provisions. Sleeve Length: the overall length of the sleeve from end to end.Turn-in: the interlocking end of the ferrule.

Glossary of Campbell Crimpnology™ Terms

ICampbell Fittings

49

c

Small Diameter Multi-Purpose Fittings

MALE & FEMALE INSERT FITTINGSInsert fittings are precision screw machined in steel, stainless steel and brass.

Recommended use• Low pressure air, waterRecommended hose attachment• Brass Crimp-on Ferrules • Worm Gear Clamps • Preformed Band Clamps

BRASS PUSH-ON FITTINGS

Recommended use• Low pressure air, water

Recommended hose attachment• None - When used with special Push-on

Hose, no clamp or ferrule is needed. The liner of the hose grabs securely onto the barb of the fitting.

DO NOT use Push-on Fittings with conventional hose.

BRASS GARDEN HOSE COUPLINGSPrecision screw machined from brass. Available with short shank or long shank.

Recommended use• Low pressure waterRecommended hose attachment• Brass Crimp-on Ferrules• Worm Gear Clamps• Preformed Band Clamps

BRASS FERRULESBrass ferrules are lightweight, easy to assemble, and provide a smooth outer surface.

Recommended use• Crimp-on hose assemblies to secure

hose and fittings for low-pressure air and water applications

I

50

I

MALE INSERT

Plated Steel

1/4 X 1/81/4 X 1/41/4 X 3/83/8 X 1/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/43/4 X 1/23/4 X 3/41 X 3/41 X 1

SM-0402SM-0404SM-0406SM-0602SM-0604SM-0606SM-0608SM-0804SM-0806SM-0808SM-0812SM-1208SM-1212SM-1612SM-1616

7.0911.488.879.19

10.9410.1312.8613.0212.6610.0718.2014.9814.9318.1818.87

hose xnpt

partnumber

listeach

316 Stainless1/4 X 1/81/4 X 1/41/4 X 3/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/45/8 X 1/23/4 X 1/23/4 X 3/43/4 X 11 X 3/41 X 1

SSM-0402SSM-0404SSM-0406SSM-0604SSM-0606SSM-0608SSM-0804SSM-0806SSM-0808SSM-0812SSM-1008SSM-1208SSM-1212SSM-1216SSM-1612SSM-1616

30.9725.3628.6525.0724.0143.6023.3928.3539.5054.5052.6552.6571.2398.1060.7091.35

BARBED HOSE INSERTS Brass

1/4 X 1/81/4 X 1/41/4 X 3/85/16 X 1/85/16 X 1/43/8 X 1/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/45/8 X 3/85/8 X 1/25/8 X 3/43/4 X 1/23/4 X 3/41 X 3/41 X 11-1/4 X 1

BM-0402BM-0404BM-0406BM-0502BM-0504BM-0602BM-0604BM-0606BM-0608BM-0804BM-0806BM-0808BM-0812BM-1006BM-1008BM-1012BM-1208BM-1212BM-1612BM-1616BM-2016

191.00207.00312.00208.00245.00240.00210.00316.00550.00315.00322.00490.00730.00364.00532.00735.00622.00675.00908.00

1481.001797.00

hose xnpt

partnumber

list/100

FEMALE INSERT

Brass

1/4 X 1/81/4 X 1/45/16 X 1/43/8 X 1/43/8 X 3/81/2 X 3/81/2 X 1/2

BF-0402BF-0404BF-0504BF-0604BF-0606BF-0806BF-0808

220.00284.00340.00282.00382.00420.00536.00

hose xnpt

partnumber

list/100

HOSE MENDER

Brass

1/4 X 1/45/16 X 5/163/8 X 3/81/2 X 1/25/8 X 5/83/4 X 3/4

BH-0404BH-0505BH-0606BH-0808BH-1010BH-1212

204.00257.00240.00336.00400.00560.00

hose size

partnumber

list/100

FEMALE SWIVEL(with ball seat)

Brass

1/4 X 1/45/16 X 1/43/8 X 1/43/8 X 3/81/2 X 3/81/2 X 1/23/4 X 3/4

BFS-0404BFS-0504BFS-0604BFS-0606BFS-0806BFS-0808BFS-1212

312.00453.00303.00420.00735.00637.00997.00

hose xnpsm

partnumber

list/100

252525252525252525252525252525252525252525

cartonqty

25252525252525

cartonqty

252525252525

cartonqty

25252525252525

cartonqty

51

BRASS PUSH-ON FITTINGS

MALE PUSH-ON

1/4 X 1/81/4 X 1/41/4 X 3/85/16 X 1/43/8 X 1/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/45/8 X 3/85/8 X 1/23/4 X 1/23/4 X 3/4

BMP-0402BMP-0404BMP-0406BMP-0504BMP-0602BMP-0604BMP-0606BMP-0608BMP-0804BMP-0806BMP-0808BMP-0812BMP-1008BMP-1012BMP-1208BMP-1212

221.00260.00341.00327.00353.00290.00336.00555.00411.00370.00535.00800.00727.00972.00842.00895.00

hose xnpt

partnumber

list/100

25252525252525252525252525252525

cartonqty

FEMALE PUSH-ON

1/4 X 1/81/4 X 1/45/16 X 1/43/8 X 1/43/8 X 3/81/2 X 3/81/2 X 1/2

BFP-0402BFP-0404BFP-0504BFP-0604BFP-0606BFP-0806BFP-0808

330.00346.00535.00387.00423.00507.00565.00

hose xnpt

partnumber

list/100

25252525252525

cartonqty

HOSE MENDER PUSH-ON

1/4 X 1/45/16 X 5/163/8 X 3/81/2 X 1/25/8 X 5/83/4 X 3/4

BHP-0404BHP-0505BHP-0606BHP-0808BHP-1010BHP-1212

300.00399.00340.00550.00786.00925.00

hosesize

partnumber

list/100

252525252525

cartonqty

MACHINED BRASS GARDEN HOSE COUPLINGS

GARDEN HOSE SET

3/81/25/83/41(NPSH)

GHS-06GHS-08GHS-10GHS-12NPS-16

13.1713.1713.4013.7026.85

hose size

partnumber

listeach

2525252525

cartonqty

GARDEN HOSE FEMALE

3/81/25/83/41(NPSH)

GHF-06GHF-08GHF-10GHF-12NPF-16

7.117.117.117.42

13.14

hose size

partnumber

listeach

2525252525

cartonqty

GARDEN HOSE MALE

3/81/25/83/41(NPSH)

GHM-06GHM-08GHM-10GHM-12NPM-16

6.756.596.816.81

14.25

hose size

partnumber

listeach

2525252525

cartonqty

WASHER

3/41(NPSH)

GHW-12GHW-16

25.0045.00

washersize

partnumber

list/100

100100

cartonqty

52


IBRASS FERRULES

0.410 X 0.5000.450 X 0.5630.478 X 0.6870.500 X 0.5000.500 X 1.0000.525 X 0.5000.525 X 1.0000.531 X 1.000

0.548 X 0.4840.562 X 1.0000.575 X 0.4840.593 X 1.0000.600 X 0.5000.625 X 0.5000.625 X 1.0000.650 X 0.500

0.656 X 1.0000.675 X 0.5160.687 X 1.0000.700 X 0.5160.718 X 1.0000.718 X 1.0000.725 X 0.5310.750 X 0.5310.750 X 1.0000.750 X 1.000

0.775 X 0.5630.782 X 1.0000.782 X 1.0000.812 X 1.0000.825 X 0.5470.875 X 0.8440.937 X 0.8440.975 X 0.8441.150 X 0.844

i.d. xlength

0.2660.3440.3280.3440.3440.3440.3750.438

0.3750.4380.4380.4380.5000.5000.4380.500

0.4380.5000.5000.5000.6250.5000.5000.5000.6250.500

0.5000.6250.5000.5620.6250.5620.6880.6880.875

piercedia.

F-222F-316F-157F-225F-265F-230F-268F-273

F-236F-278F-031F-284F-030F-028F-288F-025

F-294F-022F-300F-018F-302F-302BF-016F-013F-305F-305B

F-009F-310F-310BF-314F-001F-255F-242F-181F-241

partnumber

32.0032.0045.0033.0056.0033.0057.0056.00

34.0060.0036.0062.0037.0039.0063.0040.00

75.0043.0075.0080.9072.0072.0043.0044.0079.0076.00

67.0091.0093.0095.0088.2079.00

127.10105.00120.00

list/100

5050505050505050

5050505050505050

50505050505050505050

505050505050505050

bagqty.

53

54


JCampbell Fittings

55

Multi-Purpose Clamps & Tools

PREFORMED BAND CLAMPS

ULTRA-LOK® CLAMPSUltra-Lok® Clamps are manufactured from 201 Stainless Steel. The buckle is thicker and stronger than standard band clamps for superior holding strength. The powerful Ultra-Lok® Tool is portable which enables the operator to bring the tool to the hose, instead of the hose to the tool, for much easier assembly.

JR®-TYPE PREFORMED CLAMPSJr®-type preformed clamps are available in both galvanized carbon steel and 201 stainless steel. All buckles are stainless steel. Jr® clamps are designed for use with high production air tools, or the C001 Banding Tool.

PUNCH-TYPE PREFORMED CLAMPSPunch type preformed clamps are available in galvanized carbon steel and 201 stainless steel. All buckles are stainless steel. Punch clamps are designed for use with the punch style tool for the ultimate in field serviceability.

All band clamps, banding, tools and accessories are genuine Band-It products. Ultra-Lok® and Jr® are registered trademarks of Band-It®.

T-Bolt clamps provide 360 degrees of sealing surface, and are particularly useful for high torque applications.

T-BOLT CLAMPS

Banding is cartoned in 100 foot rolls and available in 201 stainless steel. Buckles, sold separately, are 201 stainless steel. Banding features specially rolled edges to reduce the possibility of injury. Use the C001 Banding Tool to install.

BANDING AND BUCKLES

WORM GEAR CLAMPSWorm gear clamps are available in standard 1/2” band, miniature 5/16” band and quick release 1/2” band. All are manufactured with stainless steel band and stainless steel housing, with your choice of a carbon steel or stainless steel screw.

J

56

JBAND CLAMPS, BANDING, AND BUCKLES

ULTRA-LOCK® SMOOTH I.D. CLAMPS

Band: 201 StainlessBuckle: 201 Stainless

3/43/43/43/43/43/43/43/43/43/43/43/43/4

clampwidth

22-3/433-1/244-1/255-1/266-1/2789

clampid.

UL227UL210UL211UL212UL213UL214UL215UL270UL216UL217UL218UL219UL228

partnumber

803.15875.36948.16

1009.101158.431243.081344.101394.861545.741703.061860.122094.222344.63

list/100

100505050252525252525252510

cartonqty.

JR®-TYPE PREFORMED-SMOOTH I.D.

Band: Galvanized SteelBuckle: 201 Stainless

3/83/83/83/83/83/83/83/8

1/21/21/21/21/21/21/21/21/21/2

clampwidth

13/1611-3/822-1/233-1/24

11-1/41-1/21-3/422-1/22-3/433-1/24

clampid.

JS301JS343JS302JS345JS321JS346JS355JS348

JS303JS304JS331JS336JS337JS333JS330JS334JS347JS349

partnumber

110.90115.64122.01151.33223.64195.20280.59308.32

154.61170.20192.40224.70233.08247.25268.19297.27334.96376.55

list/100

100100100100100100100100

100100100100100100100100100100

cartonqty.

5/85/85/85/85/8

3/43/43/43/43/43/43/43/43/43/43/4

1-1/21-3/422-1/42-1/2

22-3/433-1/244-1/255-1/4678

JS305JS306JS307JS308JS309

JS327JS310JS311JS312JS313JS314JS315JS370JS316JS318JS319

200.84222.35243.55259.07280.11

297.98334.48352.77380.67440.13464.48508.16625.28584.18692.92984.49

100100100100100

10050505025252525252525

Band: 201 StainlessBuckle: 201 Stainless

1/41/41/41/41/41/41/41/41/41/41/4

3/83/83/83/83/83/83/83/8

1/21/21/21/21/21/21/21/21/21/2

5/85/85/85/85/8

3/43/43/43/43/43/43/43/43/43/43/4

clampwidth

13-1611-3/81-1/222-1/22-3/433-1244-1/2

13/1611-3/822-1/233-1/24

11-1/41-1/21-3/422-1/22-3/433-1/24

1-1/21-3/422-1/42-1/2

22-3/433-1/244-1/255-1/4678

clampid.


JS201JS243JS202JS245JS221JS246JS255JS248

JS203JS204JS231JS236JS237JS233JS230JS234JS247JS249

JS205JS206JS207JS208JS209


partnumber

277.59278.79304.14301.88338.21376.00403.02399.13428.47519.08611.65

287.42330.68323.72366.46417.36469.64577.38555.90

400.51441.71508.42576.67605.18634.94666.28736.95809.20883.35

531.38587.43643.99684.84730.87

795.45866.99939.08999.50

1147.091230.971331.081381.461531.311842.462074.51

list/100

100100100100100100100100100100100

100100100100100100100100

100100100100100100100100100100

100100100100100

10050505025252525252525

cartonqty.

57

PUNCH-TYPE PREFORMED

Band: Galvanized SteelBuckle: 201 Stainless

3/83/8

5/85/85/85/85/85/85/85/85/85/85/85/85/85/85/85/8

clampwidth

13/161-3/8

11-1/41-1/21-3/422-1/42-1/22-3/433-1/244-1/25678

clampid.

CP3CP311

CP4CP5CP6CP7CP8CP9CP10CP11CP12CP14CP16CP18CP20CP24CP28CP32

partnumber

77.7492.25

96.29101.70108.70118.90127.12135.38163.49170.94181.57193.89223.54236.05248.93270.95312.73438.19

list/100

100100

10010010010010010050505050252525252525

cartonqty

Band: 201 StainlessBuckle: 201 Stainless3/83/8

5/85/85/85/85/85/85/85/85/85/85/85/85/85/85/85/8

13/161-3/8

11-1/41-1/21-3/422-1/42-1/22-3/433-1/244-1/25678

CP3-SCP311-S

CP4-SCP5-SCP6-SCP7-SCP8-SCP9-SCP10-SCP11-SCP12-SCP14-SCP16-SCP18-SCP20-SCP24-SCP28-SCP32-S

192.26220.54

291.96306.94325.86357.42377.68402.70436.38462.09482.98533.26605.31651.72700.63791.45942.18

1030.25

100100

10010010010010010050505050252525252525

I.D. TIE-LOK TIES

304 Stainless

1/41/41/41/41/4

widthin.

1016-1/222-1/22935

lengthin.

AS211AS212AS213AS214AS215

partnumber

249.34326.62404.67484.84557.28

list/100

100100100100100

cartonqty.

I.D. TAGS

304 Stainless

3/41-1/23/4

widthin.

22-1/23-1/2

lengthin.

ID100ID101ID102

partnumber

190.27260.55250.09

list/100

100100100

cartonqty.

YOUR NAME

ULTRA-LOK ELECTRIC INSTALLATION TOOL

UL9010part number

for Ultra-Lok Preformed Clampsdescription

PORlist each

STANDARD AIR TOOL & COMPONENTS

S750part number

with S180 headdescription

PORlist each

CENTER PUNCH TOOLS & ACCESSORIES

T300part number

for 5/8” wide clampsdescription

PORlist each

COMPACT TOOL SET

S38part number

PORlist each

58


JBAND TOOL

C001part number

PORlist each

BAND TOOL ADAPTER

J001J050

part numberPORPOR

list eachJr adapterheavy duty adapter

description

TIE-LOK TOOL

A920part number

PORlist each

BAND

1/43/81/25/83/4

bandwidth

C202C203C204C205C206

partnumber

129.78169.04228.47276.50340.98

list/100ft.

100 ft.100 ft.100 ft.100 ft.100 ft.

cartonqty.

304 Stainless

BUCKLES

1/43/81/25/83/4

bandwidth

C252C253C254C255C256

partnumber

105.52116.60157.67196.97238.17

list/100

100100100100100

cartonqty.

201 Stainless Steel

WORM GEAR CLAMPS

STANDARD WORM GEAR(5/16” screw, 1/2” band)

Screw: Galvanized SteelBand: 301 Stainless Steel

3/8 X 7/87/16 X 19/16 X 1-1/169/16 X 1-1/411/16 X 1-1/23/4 X 1-3/41-1/16 X 21-5/16 X 2-1/4

1-9/16 X 2-1/21-13/16 X 2-3/42-1/16 X 32-15/16 X 3-1/42-9/16 X 3-1/22-13/16 X 3-3/43-1/16 X 43-5/16 X 4-1/4

3-9/16 X 4-1/24-1/16 X 54-5/8 X 5-1/24-3/32 X 64-1/2 X 6-1/25 X 76-1/2 X 8-1/28 X 10

10-1/4 X 12-1/411 X 1311-3/4 X 13-3/412-1/2 X 14-1/214 X 1615-3/8 X 17-3/818 X 2019-1/8 X 21-1/422-7/8 X 24-7/8

size range

150.00150.00150.00155.00155.00155.00155.00160.00

160.00165.00200.00220.00220.00240.00240.00250.00

275.00292.00338.00344.00350.00355.00479.00514.00

575.00580.00590.00655.00745.00857.00910.00

1003.001015.00

list/100

1010101010101010

1010101010101010

1010101010101010

101010101010101010

cartonqty.

WGCS-6WGCS-8WGCS-10WGCS-12WGCS-16WGCS-20WGCS-24WGCS-28



WGCS-188WGCS-200WGCS-212WGCS-224WGCS-248WGCS-270WGCS-312WGCS-332WGCS-390

partnumber

59


Screw: 305 Stainless SteelBand: 301 Stainless Steel

3/8 X 7/87/16 X 19/16 X 1-1/169/16 X 1-1/411/16 X 1-1/23/4 X 1-3/41-1/16 X 21-5/16 X 2-1/4

1-9/16 X 2-1/21-13/16 X 2-3/42-1/16 X 32-15/16 X 3-1/42-9/16 X 3-1/22-13/16 X 3-3/43-1/16 X 43-5/16 X 4-1/4

3-9/16 X 4-1/24-1/16 X 54-5/8 X 5-1/24-3/32 X 64-1/2 X 6-1/25 X 76-1/2 X 8-1/28 X 10

10-1/4 X 12-1/411 X 1311-3/4 X 13-3/412-1/2 X 14-1/214 X 1615-3/8 X 17-3/818 X 20

size range

200.00200.00200.00200.00200.00205.00205.00205.00

205.00215.00245.00280.00280.00295.00295.00300.00

300.00330.00340.00375.00385.00335.00525.00580.00

635.00680.00715.00760.00940.00

1109.001075.00

list/100

1010101010101010

1010101010101010

1010101010101010

10101010101010

cartonqty

WGSS-6WGSS-8WGSS-10WGSS-12WGSS-16WGSS-20WGSS-24WGSS-28



WGSS-188WGSS-200WGSS-212WGSS-224WGSS-248WGSS-270WGSS-312

partnumber

STANDARD WORM GEAR (continued from previous page)

T-BOLT CLAMPS

T-BOLT CLAMPS

Bolt & Trunion: Galvanized SteelBand: Stainless Steel

1.34 X 1.561.59 X 1.811.72 X 1.941.84 X 2.06

sizerange

TBCS-21TBCS-25TBCS-27TBCS-29

partnumber

8.368.368.368.36

listeach

Bolt & Trunion: Stainless SteelBand: Stainless Steel

1.34 X 1.561.59 X 1.811.72 X 1.941.84 X 2.062.09 X 2.312.22 X 2.442.34 X 2.562.40 X 2.692.52 X 2.812.65 X 2.942.65 X 2.942.87 X 3.182.87 X 3.183.02 X 3.313.27 X 3.563.59 X 3.884.02 X 4.314.27 X 4.564.52 X 4.814.77 X 5.065.02 X 5.315.27 X 5.565.77 X 6.066.27 X 6.566.52 X 6.816.77 X 7.067.02 X 7.317.27 X 7.567.50 X 7.817.02 X 8.318.77 X 9.0610.65 X 10.9412.65 X 12.94

TBSS-21TBSS-25TBSS-27TBSS-29TBSS-33TBSS-35TBSS-37TBSS-38TBSS-39TBSS-41TBSS-43TBSS-45TBSS-47TBSS-49TBSS-53TBSS-58TBSS-65TBSS-69TBSS-73TBSS-77TBSS-81TBSS-85TBSS-93TBSS-101TBSS-105TBSS-109TBSS-113TBSS-117TBSS-121TBSS-125TBSS-129TBSS-170TBSS-202

9.579.579.579.689.689.689.359.359.359.359.469.469.469.799.799.799.909.90

10.5610.7810.7811.3311.3311.3311.3311.7711.8811.8811.8812.2112.2113.9713.97

10101010

bagqty

101010101010101010101010101010101010101010101010101010101010101010

sizerange

partnumber

listeach

bagqty

60

2.09 X 2.312.33 X 2.622.40 X 2.692.52 X 2.812.77 X 3.062.87 X 3.183.02 X 3.313.27 X 3.563.39 X 3.683.59 X 3.883.77 X 4.064.02 X 4.314.27 X 4.564.52 X 4.814.77 X 5.065.02 X 5.315.27 X 5.565.52 X 5.815.77 X 6.066.02 X 6.316.27 X 6.566.52 X 6.817.27 X 7.567.27 X 7.567.50 X 7.817.77 X 8.068.02 X 8.318.77 X 9.0610.65 X 10.9412.65 X 12.94

sizerange

TBCS-33TBCS-37TBCS-38TBCS-41TBCS-43TBCS-45TBCS-47TBCS-49TBCS-53TBCS-58TBCS-61TBCS-65TBCS-69TBCS-73TBCS-77TBCS-81TBCS-85TBCS-89TBCS-93TBCS-97TBCS-101TBCS-105TBCS-113TBCS-117TBCS-121TBCS-125TBCS-129TBCS-139TBCS-170TBCS-202

partnumber

8.368.368.148.148.258.258.368.368.698.808.808.808.808.808.918.919.469.469.579.579.689.689.79

11.1711.1711.1711.1712.0213.3713.73

listeach

101010101010101010101010101010101010101010101010101010101010

bagqty


J

61

DOUBLE BOLT CLAMPS

7/81-3/161-5/161-3/42-3/16 2-5/163-3/16 3-7/1644-1/24-11/165-1/26-1/86-7/87-3/88-1/48-15/169-5/1611-3/1613-3/1615-1/16

hoseo.d. min.

1-1/81-5/161-17/321-31/322-9/162-15/163-3/43-13/164-3/85-1/85-1/85-15/166-7/87-3/888-7/89-3/411-3/8131517-1/2

hoseo.d. max.

SL-29SL-34SL-40SL-49SL-60SL-76SL-944004635255506006757698188759881125127514501700

partnumber

3.233.454.646.426.917.63

13.5615.8215.8222.2222.2223.3326.3032.5250.9945.6548.9399.09

112.76186.28227.08

list each

IMPORTED CLAMPS

SPIRAL CLAMPS(right hand a.k.a. clockwise)

1-1/222-1/2345681012

hosesize

SC-150SC-200SC-250SC-300SC-400SC-500SC-600SC-800SC-1000SC-1200

partnumber

12.3113.8116.2917.3819.3226.7926.3230.1942.3543.55

list each

Plated Steel

Ductile Iron

62

4004635255506006757698188759881125127514501700206N206S206SSA-316A920AA-316AA-ALAA-BRA-ALA-BRA-DIAHWA-PPASA-SSASV-ALB-316B-ALB-ALSB-BRB-DIBFBFFBBFFB-NBFFSBFFS-NBFGSBFHBBFHB-NBFHSBFHS-NBFMBBFMB-NBFMSBFMS-NBFPBFSBGBGNBHBHPBHSBMBMFBBMFB-LBMFB-N

BMFSBMFS-LBMFS-NBMGSBMHBBMHB-LBMHB-NBMHSBMHS-LBMHS-NBMMBBMMB-LBMMB-NBMMSBMMS-LBMMS-NBMPB-PPBSGBSGSB-SSC&G-LOCKPINC001C2C25C-316C-316-CCABC-ALC-AL-CC-ALSCBBC-BRC-BR-CC-DICGSSCJDCCJDC-ACJDPCJDP-ACJFSCJFS-ACJFUCJHSCJMSCJNCJN-ACJSSCJTSCJVSCJVS-ACJWSCL-316-CCL-AL-CCLIPCPCP-SC-PPC-S-CCSB

C-SSD-316DA-316DA-ALDA-BRD-ALD-ALSD-BRDC-316DC-ALDC-ALSDC-BRDC-DIDC-PPDC-SSDD-316DD-ALD-DIDP-316DP-ALDP-BRDP-DID-PPDP-PPDP-SSD-SSDSV-ALE-316E-316-CE-ALE-AL-CE-BRE-BR-CE-DIE-PPE-S-CE-SSFF-BF-316FABF-ALFBBF-BRF-DIFEFF150SFF150SSFHAS-CFHASS-CFLPSFLSSF-PPFPS-SFPSFPS-LFPS-FFRAC-CFS150SFS150SS

partnumber

pagenumber

partnumber

pagenumber

partnumber

pagenumber

61616161616161616161616161611111111559191919

15,1915167

1658151916

16,1916161651303130318

30313031303130315251203051528

51303031

3030318

303030303030303031303031521688

162059595916157

1615167

1615161536363636363635353536363535353535151529585816157

1617191919

17,19171718181818181818191917181818181718181719171517151715171715175353177

18,197

18182912121212444518

43,4443,44

4444111212

PART NUMBER INDEX

FSBFSSF-SSFSS-WFT150SFT150SSFVGDCGDSGFSGFSSGHFGHMGHSGHWGJFGJF-HWGJFSGJMSGJMSSGJSGJSSGMSGNGWSSHAAHABHAGSHAGS-CHAGSS-CHAGSSHAHASTHAHAST-CHALPS-CHALPS-C SWHALSS-C SWHAPSHAPS-CHAPS-C SWHASHAS-BVHAS-C SQHASSHASS-BVHASS-CHASS-C SQHASS-C SWHCBHCPSHCSSHDSHEHEPSHESHESSHFSHJFHJSHMSHN

HRPBHRPSHRPSSHRSHRSSICIC-LIC-SIDIMSIMS-HWIMSSJJSLHRPSSMAMBMEMSNBHPCTNPFNPMNPSNSNSTANSTBNSTDPCTF-CPCTFBHPCTGBPCTGSPCTM-CRGJFRGJFSSRGNRGNSSRHJFRHNRHSRN-SRNRN-LRN-XLRNS-SRNSRNS-LRNS-XLSSALSANSCSGPCSHSSLSMSPS-SSPSSSMSSS-SSSS

SWTTBCSTBSSTC-CTC-C 316TCBTCCTCGBTCGSTCR-CTCR-C 316TFTF-NTFSSTGTGNTHAS-CTHASS-CTHSTLFTLF-LTLF-NTLFSSTLHTLH-LTLH-NTLHBTLHB-NTLHSSTLMTLM-LTLM-NTLMSSTMTM-NTMSSUFUFSSUGUHUH-iUH-CUHSSULUL9ULFULHULMULWUMUMSSVGVOWCWGCSWGSSWN

partnumber

pagenumber

partnumber

pagenumber

partnumber

pagenumber

743,44

174012128

242424245252525223232424242424242424555

111155

111111115

111155

1155

111111666

2529666

2525252525

205

2055

2626265823232359572077

297

405252526777

4040404040232324242525866666666

58463961158

6151

45,46,4745,46,47

5147

46,47

75860603939393939393939313231203212128

313132313131323132313131323131323129292929292929575829292929292920242659607

63

PHONE 800-367-3678FAX 800-367-3670

[email protected]

206 Hose UnionAir Hammer CouplingsBall & Socket CouplingsBand Clamps and ToolsBarbed Insert Fittings (Steel, Brass, Stainless)Brass Push-on FittingsCam & Groove Couplings, Standard COBRACam & Groove Couplings, Campbell COBRA Cam & Groove Gaskets and HandlesCampbell Coupling Selection Guide ChemJoint Male StemsChemJoint Viton Seal CouplingsClamps, BandClamps, Double-Bolt (imported)Clamps, Interlocking 360 U-BoltClamps, SpiralClamps, T-BoltClamps, Worm GearCombination NipplesCone Strainers (for use with Part C's)Crimpnology NipplesDouble-Lock CouplingsFerrules, All CrimpnologyFerrules, BrassFerrules for Campbell COBRAFerrules for ChemJoint Viton Seal CouplingsFerrules for Crimpnology NipplesFerrules, Light DutyFerrules for Viton Seal Ground Joint CouplingsFlangesFoot ValvesGarden Hose CouplingsGlossary of Campbell Crimpnology TermsGround Joint Couplings, Campbell Viton Seal Ground Joint Couplings with Staked FerruleHeatWaveInterlocking Male Stem with Staked FerruleInterlocking U-Bolt ClampsMale Stems, ChemJointMale Stems, InterlockingMale Swivel Crimpnology NipplesMendersNST Suction Hose CouplingsNitrogen CouplingsPCT FittingsReducing Nipples (TBE)Sanitary Tri-Clamp FittingsSanitary Tri-ClampsSanitary Machined FerrulesSight GlassSingle-Lock CouplingsSleeves for Cam & Groove CouplingsSleeves, All CrimpnologySleeves for Suction Hose CouplingsSleeves for Ball & Socket CouplingsStrainersSuction Hose CouplingsSuction Hose Couplings (imported)Swivel Crimpnology NipplesSwivel Male Stems

11258

57-595152

15-1915201

3535-3657-59

61266160

59-605-615

11-1234-3543-44

5343-4443-4443-4444-4530, 44

128

5248

23-242323232635231167

30-32406

39393915

30-3145-4645-4646-4746-47

877

1123

64

ALPHABETICAL INDEX

6292929264040

59-608

TOE NipplesUniversal Couplings, CampbellUniversal Couplings (standard imported)UniversaLock CouplingsWhip Check Safety CablesWine FittingsWine FerrulesWorm Gear ClampsWrenches (Spanner & Hydrant)

WE WORK GREAT UNDER

PRESSURE!

WARRANTY – Campbell Fittings, Inc. warrants the products described herein to be free from defects in materials or workmanship for a period of one year from the date of shipment by Campbell Fittings, Inc. under normal use and service. The obligation under this warranty is limited to replacing or repairing, without charge, any part supplied by Campbell Fittings, Inc. proven to have been defective at time of shipment, and is expressly conditioned on the Purchaser’s giving Campbell Fittings, Inc. immediate notice upon discovery of the defect. Campbell Fittings, Inc. shall have the option of requiring the return of the defective material (transportation prepaid) to establish the claim.

This warranty shall not apply if the product has been altered or repaired by others, and Campbell Fittings, Inc. shall make no allowance or credit for such repairs or alterations unless authorized in writing by Campbell Fittings, Inc.

The foregoing warranty is the only warranty applicable to the products described herein, and any previous agreements, representations or warranties, oral or written, are hereby cancelled. No other expressed or implied warranties shall apply, including but not limited to implied warranties of merchantability and fitness for a particular use.

Under no circumstances will Campbell Fittings, Inc. assume any liability whatsoever for any consequential or contingent damages.

PRODUCT CHANGES – The right is reserved to make changes in pattern, design or material when deemed necessary, without notice. Products which have become obsolete by reason of design change or discontinued as a manufactured item may not be returned for credit.

RETURNED GOODS – Materials must not be returned unless consent has first been obtained in writing from Campbell Fittings, Inc. All materials approved for return must arrive properly packaged and pass our inspection criteria before credit will be issued. Returned products are subject to restocking fees.

RESPONSIBILITY – We will not be responsible for delays resulting from strikes, accidents, negligence of carriers, or other causes beyond our control.

RISK – All goods are at the risk of the Purchaser after they have been delivered to the carrier and receipt obtained for same (in good order).

ORDERS – Are subject to acceptance at Campbell Fittings, Inc., Boyertown, PA 19512.

SPECIAL PRODUCTS – Requests for cancellation of orders made to customer’s specifications are not refundable and will not be considered if the manufacture of material is in process when the request is made.

ERRORS, SHORTAGES, ETC. – Claims for errors, shortages, etc. must be made on receipt of goods, otherwise no allowance will be made.

PRICES AND QUOTATIONS – All prices and quotations are subject to change without notice.

TAXES – Any tax that may be imposed by law on the sale of articles made or sold by this company shall be added to the sale price of such articles.

LIABILITY WARNING – Campbell Fittings, Inc. has no warranty applicable to fitness for the purpose of a particular use of any of the products it sells or issues as samples and shall not be responsible for any loss involving its products. It is entirely the responsibility of the end user or installer to be sure that fittings, hose, and their applications are compatible.

Our Guarantee of Quality

Campbell Fittings

65

Manufacturing & Offices:Campbell Fittings, Inc. Box 417 301 S. Washington St. Boyertown, PA 19512

Warehouse Locations:Boyertown, PA Houston, TX Ceres, CA

U.S. and Canada:phone 800.367.3678 fax 800.367.3670 email [email protected] campbellfittings.com

International:phone 610.367.6916 fax 610.367.0689 email [email protected]

M E M B E R

Affiliations:

THE LEADER IN HOSE SYSTEMS TECHNOLOGYcampbellfittings.com/pdfs/Campbell-Fittings-Catalog.pdf ·...

Documents

Transcript of THE LEADER IN HOSE SYSTEMS TECHNOLOGYcampbellfittings.com/pdfs/Campbell-Fittings-Catalog.pdf ·...