Raymond ChiuPrincipal Consultant

Automotive & Electronics Division

Hong Kong Productivity Council(raymondchiu@hkpc.org)

The Latest Update in the

Standardization in the LED Industry

http://hk.wrs.yahoo.com/_ylt=A3OyCEYGC1pM8_MAF_K.ygt./SIG=12mu2bsmb/EXP=1281055878/**http:/www.quasarelectronics.com/khxc/media/gbu0/prodxl/159900.jpg

STANDARDIZATION IN THE LED INDUSTRY

Why LED for General Lighting

Why Standardization for LED Lighting

Global Actions International Standardization Bodies

Categories of Standards: Measurement Standards

Performance Standards

Safety Standards

EMC Standards

International Standards: China: - GB U.S.A.: Energy Star

Standardization in Hong Kong Voluntary Schemes

Industry Support Organization:

Hong Kong Solid State Lighting Industry Consortium (HKSSLIC)

WHY LED FOR GENERAL LIGHTING

THE LED DIFFERENCE

LED lighting technology excels in almost all performance parameters

over existing lighting technologies, such as fluorescent lamp,

incandescent lamp, etc.

The technology continues to improve.

A typical comparison is shown below:

LED lamp CFL lamp Incandescent lamp

Wattage

(with light output ~450lm)

5 9 40

CRI > 85 > 80 > 99

Life time (hrs) 25,000/ 35,000/ 50,000

6,000/ 8,000 1,200

Efficacy (lm/W) 90 50 10

Power Factor > 0.7 > 0.5 ~1.0

Turn on instantly Yes Some Delay Yes

Hazardous material No 5mg mercury/bulb No

WHY STANDARDIZATION FOR

LED LIGHTING

CONSUMER AWARENESS AND CONFIDENCE

Weak public awareness of the benefits and

performances of LED lighting

Great variance in supplier / product performance is

turning away consumers

Weak correlation to existing Lighting solutions

INDUSTRY ADAPTATION AND MEASUREMENTS

Weak correlation to existing Lighting solutions

Weak in product standardization

New performance parameters / characteristics need

new measurement methods

Great variance in supplier / product performance need

standard and agreed measurement methods

GLOBAL ACTIONS

INTERNATIONAL STANDARDIZATION BODIES

ANSI - American National Standards Institute (www.ansi.org)

ASSIST - Alliance for Solid-State Illumination Systems and

Technologies (www.lrc.rpi.edu/programs/solidstate/assist)

CIE - International Commission on Illumination (www.cie.co.at)

FCC - Federal Communications Commission (www.fcc.gov)

IEC - International Electrotechnical Commission (www.iec.ch)

IESNA - Illuminating Engineering Society of North America (www.iesna.org)

NFPA - National Fire Protection Association (www.nfpa.org)

UL - Underwriters Laboratories Inc. (www.ul.com)

MEASUREMENT STANDARDS (1)

ANSI C82.XX (under development) - LED driver testing method

CIE 127: 2007 - Measurement of LEDs

CIE 13.3-1995 - Methods of measuring and specifying colour rendering of light sources

CIE TC 1-69 (under development) - Colour rendering of white light sources

CIE TC 2-50 (under development) - Measurement of the optical properties of LED clusters and arrays

CIE TC 2-63 (under development) - Optical measurement of high-power LEDs

CIE TC 2-64 (under development) - High speed testing methods for LEDs

IEC 61341 - Method of measurement of centre beam intensity and beam angle(s) of reflector lamps

IES TM-21 (under development) - Lumen depreciation lifetime estimation method for LED light sources

MEASUREMENT STANDARDS (2)

IES LM-79-08 - Approved method for electrical and photometric measurements of solid-state lighting products

IES LM-80-08 (under revision) - Approved method for measuring maintenance of LED light sources

IESNA LM-XX (under development) - Approved methods for electrical and photometric measurement of DC high power LEDs and arrays

IESNA LM-XX2 (under development) - Approved methods for electrical and photometric measurement of AC high power LEDs and arrays

IESNA LM-XX-201X (under development) - Approved methods for characterization of LED light engines and integrated LED lamps for

electrical and photometric properties as a function of temperatures

IES _______ (proposal) - Measurement of OLEDs

IES _______ (proposal) - LM-80 luminaire level

PERFORMANCE STANDARDS (1)

ANSI C82-SSL1-20XX (under development) - Driver performance standard

ANSI_NEMA_ANSLG C78.377-2008 (under revision) -American National Standard for Electric lamps specifications for the chromaticity of solid state lighting products

IEC 62384 - DC or AC supplied electronic control gear for LED modules - performance requirements

IEC 62XXX (under development) - Performance standard for LED modules & performance standard for LED luminaries

IEC PAS ANSI C78-377 (under development) - Publicly available specification of the existing ANSI_ANSLG C78.377 standard (including a translation table for the specification in terms of LED grid coordinates)

PERFORMANCE STANDARDS (2)

IEC/PAS 62612 ed. 1.0 (under development) - Self-ballasted LED lamps for general lighting services - performance requirements

IEC 62663-2 (under development) - Performance standard for self-ballasted LED lamps by voltage < 50 V

SAFETY STANDARDS (1)

ANSI/IESNA RP-27.1-05 (under development) - Photobiological safety for lamps and lamp systems general requirements

ANSI/IESNA RP-27.2-00 (under development) - Photobiological safety for lamps and lamp systems measurement systems

ANSI/IESNA RP-27.3-96 (under development) - Photobiological safety for lamps risk group classification and labeling

ANSI/UL 1012 - Power units other than Class 2

ANSI/UL 1310 - Standard for Class 2 power units

UL 1993 - the standard for safety of self-ballasted lamps and lamp adapters

(supplement to include devices using LEDs)

CIE TC 2-58 (under development) - Measurement of LED Radiance and Luminance

CIE TC 6-55 (under development) - Photobiological Safety of LEDs

SAFETY STANDARDS (2)

IEC 61347-2-16: 2006 (lamp control gear Part 2-13) Particular Requirements for D.C. or A.C. Supplied Electronic Control Gear for

LED Modules

IEC 62031- LED modules for general lighting safety requirements

IEC 62471 Ed. 1.0 b: 2006/CIE S 009 (CIE S 009: 2002) -Photobiological safety of lamps and lamp systems

IEC 62560 Ed. 1 (under development) - Self-ballasted LED lamps for

general lighting services > 50 V Safety specifications

IEC 62663 Ed. 1.0 (under development) Non-ballasted single

capped LED lamps for general lighting Part 1: Safety requirements

UL 8750 - Outline of investigation for LED light sources for use in

lighting products

EMC STANDARDS

ANSI C82.77-2002 (under review to include SSL) - Harmonic emission limits - related power quality requirements for lighting

CISPR 15 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar

equipment

IEC 61000-3-2 - Electromagnetic compatibility (EMC) Part 3-2: limits for harmonic current emissions (equipment input current 16A per phase)

IEC 61547 - 1995 - Equipment for general lighting purposes EMC

immunity requirements

INTERNATIONAL STANDARDS

- GB

GB 19510.14-200X (14LED; IEC 61347-2-13:2006 Ed.1.0)

GB 24819-2009 (LED; IEC 62031)

GB/T 24825-2009 (LED/)

GB/T 24826-2009 (LEDLED)

GB/T 24823-2009(LED)

GB 24906-2010 (50VLED)

OVERSEAS VOLUNTARY SCHEMESCountry Voluntary Scheme Authority

Korea Eco-labeling Program EL209. General Purpose LED Lamps

EL209-2008/1/2008-137

Korea Energy

Management

Corporation

Singapore Singapore Green label scheme - Solid State LED (SGLS 54) Environmental

Council

U.S. Lighting Facts - Partner Participation Manual, Version 1.0 Department of

Energy (DOE)

U.S. ENERGY STAR Program Requirements for Integral LED Lamps-

Eligibility Criteria, Version 1.1

Department of

Energy (DOE)

E.U. Commission Regulation (EC) No 244/2009 of 18 March 2009

Commission Regulation (EC) No 859/2009 of 18 September 2009

European

Commission

U.K. Energy Saving Trust - LED Requirements for Replacement

Lamps and Modules

Energy Saving Trust

ENERGY STAR

ENERGY STAR is the most recognized voluntary program

worldwide in dealing with various energy-saving concerns.

ENERGY STAR REQUIREMENTS FOR INTEGRAL LED LAMPS

Effective Date: 31 August 2010

Scope:

apply to integral LED lamps, defined as a lamp with LEDs, an integrated LED driver, and an ANSI standardized base designed to connect to the branch circuit via an ANSI standardized lamp holder/socket.

Classifications of lamp types:

- Replacement lamp:

(1) Omni-directional

(2) Directional

(3) Decorative

- Non-standard lamp

STANDARDIZATION IN HONG KONG

GREEN COUNCIL - HONG KONG GREEN LABEL SCHEME

Green Council: Environmental Association

Product Environmental Criteria for LED Lamps

Currently effective

Scope:

apply to integral LED lamp which is intended to replace fluorescent lamp, incandescent lamp, decorative (candelabra style) lamps and halogen lamp

Classifications of lamp types: Replacement lamp:

- Omni-directional

- Directional

- Decorative

Non-standard lamp

ELECTRICAL AND MECHANICAL SERVICES DEPARTMENT (EMSD) - HONG KONG GOVERNMENT

Hong Kong Voluntary Energy Efficiency Labeling Scheme (VEELS) for LED lamps

Tentative Scheme Document is ready for trade consultation

Scope:

apply to directional and non-directional LED lamps intended for general lighting purposes having the following characteristics:

- a rated voltage up to 240 Volt AC or DC; and

- a rated voltage frequency of 50 Hz for AC; and

- a rated lamp wattage up to 60 watts

apply to LED lamps designed with or without dimming operations

does not cover

(i) LED tubes

(ii) LED lamps that intentionally produce tinted or coloured light

(iii) organic LED (OLED)

The scheme is expected to commence in 2011

The scheme will operate as Recognition Type

INDUSTRY SUPPORT ORGANIZATION

HONG KONG SOLID STATE LIGHTING INDUSTRY CONSORTIUM (HKSSLIC)

HKSSLIC Steering Committee(rep: HKPC, Industry, Institution, Govt.)

Support &Coordination

Solution &Application

IP &Commercialization

Standard, Testing &Certification

TechnologySupport

HKPC - HKSSLICSupport Team

HKSSLIC Secretary

HKPC SupportHKSSLIC Sub-Com

Organization & Membership

MissionTo be the focal point to drive

for benefits of the Solid State Lighting (SSL)

Industry in Hong Kong

http://images.google.com.hk/imgres?imgurl=http://www.hkpc.org/bme2008/Supporting_Organizations/hkust_logo.gif&imgrefurl=http://www.hkpc.org/bme2008/Supporting_Organizations/Supporting_Organizations.html&usg=__okBezVizNLae2DS8vc1PK0e-BZI=&h=688&w=517&sz=8&hl=zh-TW&start=12&tbnid=UmgWgbnV9psKpM:&tbnh=139&tbnw=104&prev=/images?q=hkust&gbv=2&hl=zh-TW&safe=activehttp://images.google.com.hk/imgres?imgurl=http://www.thomascrampton.com/wp-content/uploads/hkulogo.png&imgrefurl=http://www.thomascrampton.com/tag/hku/&usg=__ZRBlSph-O0r29cyj35HiQgU-eI8=&h=520&w=461&sz=211&hl=zh-TW&start=76&tbnid=QoEbbcwg7GZ4qM:&tbnh=131&tbnw=116&prev=/images?q=hong+kong+university&gbv=2&ndsp=18&hl=zh-TW&safe=active&sa=N&start=72http://images.google.com.hk/imgres?imgurl=http://www.esa-conference.org/imgs/Kema.JPG&imgrefurl=http://www.esa-conference.org/article/view/2009Sponsors&usg=__z43MQ2LDdbyKjlCQdW1xZUT-A18=&h=185&w=484&sz=36&hl=zh-TW&start=11&tbnid=SC_XHK2OpguVtM:&tbnh=49&tbnw=129&prev=/images?q=kema&gbv=2&hl=zh-TW&safe=active

HKSSLIC MAJOR ACTIVITIES

- Support & Coordination Sub-Committee- Seminar, Forum- Training (electronics, optics, thermal, tools)- Showroom visit - Factory & Test Laboratory visits- Competitions

- Professional- School (primary & secondary)

- Representation in ITCs LED Task Force

- Standard, Testing & Certification Sub-Committee- International Standards- Local Standards / Adoption- Testing & Certification

- VEELS with EMSD- Voluntary Energy Efficiency Labeling Scheme

http://images.google.com.hk/imgres?imgurl=http://www.esa-conference.org/imgs/Kema.JPG&imgrefurl=http://www.esa-conference.org/article/view/2009Sponsors&usg=__z43MQ2LDdbyKjlCQdW1xZUT-A18=&h=185&w=484&sz=36&hl=zh-TW&start=11&tbnid=SC_XHK2OpguVtM:&tbnh=49&tbnw=129&prev=/images?q=kema&gbv=2&hl=zh-TW&safe=active

http://www.hkpc.org

HKPC Your Partner