The European Lighting Industry Position on How to Maximise the Potential Benefits of European Policy...
-
Upload
deshaun-easterling -
Category
Documents
-
view
215 -
download
1
Transcript of The European Lighting Industry Position on How to Maximise the Potential Benefits of European Policy...
The European Lighting Industry Position onHow to Maximise the Potential Benefits of
European Policyon Energy Efficiency in Lighting
January 2008
Page 2January 2008
A presentation
ELC & CELMA, together in RoMS
Why we need to achieve energy efficient lighting
The ELC & CELMA Joint Position on Lighting
Page 3January 2008
ELC & CELMA, TOGETHER IN ROMS
Page 4January 2008
European Lamp Companies Federation (ELC)
collectively employ over 50,000 people in Europe
annual turnover in Europe of €5 billion www.elcfed.org
HID
7 Member companies
HID
Page 5January 2008
European Luminaires and Ballasts Industry (CELMA)
18 National Manufacturers Associations for Luminaires and Electrotechnical Components for Luminaires in 13 EU countries
Represents more than 1000 companies (majority of small and medium-sized companies)
Directly employs more than 60 000 people in Europe
Generate over 12 billion Euro annually
http://www.celma.org
Page 6January 2008
ELC & CELMA, together in RoMS
ELC & CELMA work together in RoMS (Roll-Out Member States), the first joint lighting industry national outreach programme on energy efficiency
Currently, one of few such joint industry programmes in Europe
Currently operating actively in 12 countries and soon operating in more European countries
Page 7January 2008
Working together to..
Support European governments to develop policy and other measures that deliver significant CO2 emission reductions through increasing the uptake of energy efficient lighting.
Help governments to meet their National and European targets in a quick, practical and cost effective way.
Help to identify the barriers to change and assist end users to overcome these barriers.
Work with a range of stakeholders (our value chain, NGOs, retailers etc) to develop and communicate user friendly information to end consumers on how to achieve savings through energy efficient lighting technology.
Page 8January 2008
WHY WE NEED TO ACHIEVE ENERGY EFFICIENT
LIGHTING
Page 9January 2008
Lighting – a significant consumer of electricity
“Lighting consumes 14% of all electricity consumption within the EU and 19% of global electricity consumption”.
International Energy Agency
“Lighting requires as much electricity as is produced by all gas-fired generation and 15% more than produced by either hydro or nuclear power”.Light’s Labour’s Lost – Policies for Energy-efficient
Lighting. IEA
Page 10January 2008
The current pictureOver 60% of all Europe’s lighting = inefficient
1/3 of street lighting in Europe still based on old, outdated and inefficient technology current switch over rate is 3% per year - meaning it will take another
generation to upgrade average life-time of lighting installation = 40 years new technology available, more energy efficient and better quality light
More than 75% of office lighting systems still inefficient current switch over rate is 7% per year average life-time of lighting installation = 25 years huge differences in efficiency between old and new systems (energy
saving potential 30-80%)
Approximately 85% of lamps currently in EU homes are energy inefficient.
Page 11January 2008
The facts Costs for CO2-reduction
Source: Vattenfall
Page 12January 2008
THE ELC & CELMA JOINT POSITION ON LIGHTING
Page 13January 2008
The ELC & CELMA response
3 key issues:
1. EU-wide Product Standards
2. National measures to encourage renovation of existing lighting installations
3. EU-wide Lighting Design Legislation to improve light quality as well as the energy efficiency of the lighting installation
Page 14January 2008
Overview
Through its joint position, ELC and CELMA aim to ensure a quick and effective follow-up to the EU’s public commitments from March 2007 on developing a low carbon economy, in particular through a 20% increase in energy efficiency by 2020.
Lighting can contribute via…
EU-wide product standards
Renovation of existing installations
EU-wide lighting installation design criteria
Page 15January 2008
Issue 1: Product standards (I)
Goal: development of Implementing Measures under the EuP Directive
Timing: this is the first and quickest way to secure significant energy and CO2 savings for new lighting products placed in the EU market
Labelling: CE-marking, sole means of identification!
Page 16January 2008
Issue 1: Product standards (II)
Scope: IM’s should be formulated independentlyformulated independently for each of the lighting
EuP’s (lamps, ballasts, optical systems of luminaires and control systems - standby power)
Support for selected product technology-based categoriestechnology-based categories and application-independentapplication-independent
IM’s should contain generic energy efficiency criteriageneric energy efficiency criteria for the specific product categories listed in the Eco-profiles tables provided by ELC and CELMA, independent of the application independent of the application areaarea the products identified by the Commission will be removed from the total market!
Luminaire optical part tables should not lead to additional should not lead to additional requirementsrequirements for lamp categories for which no Eco-profiles have been defined
Page 17January 2008
Issue 2: Renovation of existing installations
Goal: adoption of complementary national legislation that encourage the renovation of existing low performing installations, starting with street and office lighting
nEEAPs under the ESD, a tool to achieve this!
Page 18January 2008
Issue 3: EU-wide Lighting Design Legislation
Goal: development of harmonized EU-wide energy saving and performance criteria for lighting installations, through authority certification of lighting designs, based on European Legislation
Such rules: Would ensure the improvement of light quality whilst achieving energy
savings
Could be part of building codes and public procurement rules in the Member States
Page 19January 2008
Conclusions
ELC & CELMA commit to policy-makers and regulators: To assist the development of workable
Implementing Measures under the EuP Directive by providing technical lighting expertise
To provide assistance to drive renovation through nEEAPs through our Roll Out Member State (ROMS) network
To build awareness for the need of harmonised lighting design criteria to push for larger savings in installations
Page 20January 2008
ROMS website
http://roms.elcfed.org/
ELC website
http:www.elcfed.org
CELMA website
http:www.celma.org
Page 21January 2008
Thank you