THE DOPE DIFFUSER Is in a leading position in the field of AUTOMATIC POSITIVE DOPING and offers advanced technology making it possible to apply correctly a determined weight of grease onto the threads of joints before screwing together connections. Casings/Tubing/Drill Pipe It is also particularly suitable for the Drill Pipe, giving unquestioned logistic and economic advantages ENVIRONMENT: The elimination of spills is essential for respect of the environment. The Dope Diffuser prevents anything of the greasing process from falling into the sea in Off Shore installations and into the ground On Shore. THREAD COMPOUND APPLICATION: Apply the correct amount and type of thread compound as per the pipe manufacturer recommendations.

• Apply an even coat of manufacturer recommended connection thread compound • Excessive thread dope may effect the connection performance • Thread compound should be applied as a continuous film, thread form outline should be clearly

visible • Keep the running compound container covered in order to avoid contamination from dust, water, or

other contaminants. • Thread compounds are all required to be regularly mixed during use.

SAFETY: The compound no longer SPILLS over the rig floor because the entire application process is enclosed. This keeps the work area clean which is of basic importance for safety and stops the operational personnel from slipping.

� Application using a brush gives uneven distribution and allows contamination: with resultant seizure and loss of the thread.

� The Dope Diffuser protects the compound from foreign bodies as it is enclosed in the

distributor and eliminates the risk of brushes falling accidentally down the well. SAVINGS: With the Dope Diffuser savings are made: the quantity is measured out for the connection only and excess application as the traditional method is eliminated. The excess that falls down the well creates blockages that make it difficult (and expensive) to send down work-over or drilling equipment. Estimation of compounds quantity per running is now possible with Dope Diffuser

THE CLEAN RECOVER TOOL

Is in a leading position in the field of C.R.T. is a mechanical pneumatically driven device which cleans Casings/Tubing/Drill Pipe- Pin and Box, using a harmless solvent and collects the resulting mud which can then be disposed of without contaminating the environment. C.R.T. It works by cleaning the Pin and Box threads with rotating brushes and the harmless solvent ENVIRONMENT: Thread cleaning procedures can thus be done without dispersing the residues into the environment. SAFETY: To help Oilfield Operators to protect the environment from pollution when preparing the casing and tubing we recommend using simple reliable tools as the “Clean Recover Tool”

THE ULTRA MUD VACUUM

Is in a leading position in the field of U.M.V. this is a device designed to remove all types of mud, liquid and solid with an extreme high vacuum. The device is entirely Pneumatic and constructed according to principles that confer great robustness. U.M.V. is ideal use in extreme conditions such as those present on the rig floor or down in the substructures of petroleum drilling rigs. SAFETY: Can remove slippery liquids from surfaces where personnel pass or stand reducing the risk of injury. ENVIRONMENT: Ultra Mud Vacuum for complete control of Environment and Safety to control mud on the rig floor.

MUD RECOVERY BUCKET “MRB”

Introduction The Mud Recovery Bucket is used to contain the violent outflow of mud when the drill pipe is disconnected during extraction of pipes in petroleum drilling operations as a protective measure for personnel and for controlled recovery of the mud. Functionality The two halves are opened and closed by hydraulic jacks installed inside the container in a position that does not interfere with the drill pipe or its tool joint. Safety For the safety of the worker and persons standing nearby, a safety bar is positioned on the opening of the container which blocks the closure of the two halves. Inside the container there are two buffers with rubber pads which ensure that the drill pipe is housed centrally.