THE DOOR STORE - Ballew SawDuty Spindle Shaper for arched top rail and arched panels. Has 4 Heavy...

Crown Rail and Panel PatternsCrown Rail and Panel PatternsPART DESCRIPTION PRICE

18CPP18CPP 10 Crown Panel Patterns $129.00$129.0018CRP18CRP 10 Crown Top Rail Patterns $129.00$129.00

Arc Rail and Panel PatternsArc Rail and Panel PatternsPART DESCRIPTION PRICE

18RPP18RPP 12 Round Panel Patterns $129.00$129.0018RRP18RRP 12 Round Top Rail Patterns $129.00$129.00

Set 1Set 1PART PRICE

DOORSTORESET1 $649.00

Includes: 18CRJ, 18CPJ, 18CRP and18CPP



Includes: 18CRJ, 18CPJ, 18RRP and18RPP



Includes: 18CRJ, 18CPJ, DS18CRP,18CPP, 18RRP and 18RPP

18CRJ features a built-in automatic pin-ion gear centering device for cabinetdoors. (18" opening for rail). $239.00

18CPJ features a built-in automatic piniongear centering device for cabinet doors.(18" opening for panels). $239.00

Patterns are made of hardwood and are interchangeable for making doors 9 -1/2" to 22", using 2" stiles. Patterns are 18” long.

18RRP18CRP 18RPP18CPP

Crown Rail JigCrown Panel Jig

THE DOOR STOREJigs for Cabinet Doors

2” Rise 1-1/4” to 1-3/8” Rise

90 MISCELLANEOUS DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.

www.ballewsaw.com [email protected] Fax: 1 (417) 865-3797

RELIABLE CUTTING TOOLS

The CopeCrafterThe CopeCrafterModels CC10-1, CC10-2, and CC16-1.

The Original CopeCrafter was designed by Reliable to complement the Panelcrafter for any shop thatdesires higher production. The CopeCrafter comes equipped with two clamping cylinders for superior holding.There are two methods of guiding the CopeCrafter in a longitudinal plane across the shaper table: a straight,plexiglass template to guide on the vertical wood shaper fence or rub collar; and a 3/4" x 3/8” miter steel barthat attaches to the base of the CopeCrafter with two allen cap screws to guide in the miter slot on the shapertable top. Nine placements for adjusting distance of cutter to spindle. The miter bar has 9 placement settings.

Safety: The material is clamped to the CopeCrafter by two powerful air cylinders. With all "Crafter" familyunits, the operator’s hands are away from the cutting tools.

Ease of Operation: The air flotation on the bottom of the CopeCrafter makes the unit very easy to guide acrossthe shaper table top. Converts an ordinary shaper into a sliding table shaper, with the addition of theCopeCrafter. Use to cut rails for rapid production.

CC-10-1 Specifications:• Max. Width material clamping: 11-1/2"• Max. Height material clamping: 2" • 2 Clamping Cylinders• Free Air Required: 1.0 CFM • Air Flotation• 1" Base to match PanelCrafter • Weight: 31 lbs.• 90-110 PSI • 1” base

CC-10-2 Specifications:• Max. Width material clamping: 11-1/2"• Max. Height material clamping: 2" • 1-1/2" Base• Free Air Required: 1.0 CFM • Air Flotation• 2 Clamping Cylinders • Approximate Weight: 35lbs.• Use with larger cutters and Insert tooling • 90-100 PSI

CC-16-1 Specifications:• Used for Wider Materials• Max. Width clamping: 16" • 1" Base• Use as Railcrafter for 16" material • Air Flotation• Cut Rails up to 16" quickly and safely • 2 Clamping Cylinder• 90-110 PSI • Weight: 40 lbs.• 1.0 CFM

CC-10-1 $750.00CC-10-1 $750.00

CC-10-2 $950.00CC-10-2 $950.00

CC-16-1 $950.00CC-16-1 $950.00

Copecrafter

Railcrafter

CALL TOLL FREE TO ORDER 1 (800) 288-7483 91

Ballew Saw & Tool, Inc. 325 South Kimbrough Ave. | Springfield, MO | 65806 1 (800) 288-7483

The PanelCrafterThe PanelCrafterModels 609 and 406. The PanelCrafter has easyoperation, glides on a cushion of air (.0005/.003”),and eliminates pre-bandsawing. It is also construct-ed of the finest aircraft-grade aluminum. For clari-ty, guards are not shown, but are recommended forsafe operation of machinery. With sufficient powerand the proper cutters, pre-band sawing is eliminat-ed. The X and Y movement is made easy by meansof a reverse air flow system.

With the control valve on the left, you can controlthe amount of air cushion through a series of air jetson the bottom of the unit, eliminating friction. Forsafety, hands are not near the cutters.

Coping is fast, easy and safe. The coping bar isattached to the base with two knob screws. Use ablowout or backer board with the cope bar to elimi-nate blowout. For rail cuts use a straight template torub against the fence or ball bearing rub collar.Make sure the cutters are to proper depth, thenclamp the material securely with the pneumaticclamping cylinders.

PC-406 $1,100.00$1,100.00

609 $1650.00

Specifications for Model 406 :• Max. Width material clamping: 16"• Max. Height material clamping: 1-5/16"• Air Flotation• Weight: 45 lbs.• Includes one set of Independence

Design Templates (shown below)• 2 Clamping Cylinders• Thumb Control On-Off Valve• Free Air Required: 1.0 CFM• Panel Width Minimum: 3-1/2”• Panel Width Maximum: 16”

Specifications for Model 609 :• Max. Width material clamping: 24"• Max. Height material clamping: 1-7/8"• Air Flotation• Weight: 63 lbs.• Includes one set of Independence Design

Templates (shown below)• 2 Clamping Cylinders• Thumb Control On-Off Valve• Free Air Required: 1.5 CFM• Panel Width Minimum: 4”• Panel Width Maximum: 24”

PC-762 $2,150.00$2,150.00

Specifications for Model PC-762 :• Max. Width material clamping: 30"• Max. Height material clamping: 1-5/16"• Free Air Required: 1.5 CFM• Weight: 75 lbs.• Starter set templates: 3M/3F

3” Indivdual ArchPC-609 - 16” Clamping Material PC-762 - 30” Clamping Material




The PanelCrafter Cabinet Door System Templates and AccessoriesThe PanelCrafter Cabinet Door System Templates and Accessories

Independence DesignStandard set furnished with

each panel crafter 609 consistsof 9 profiles and 9 counter pro-

files. 2 straight templates fortenon cut and general shaping

1-5/8" rise.

C60-001-1 - Even No.sC60-001 - Odd No.s

Liberty DesignCathedral 2" rise to top ofarch. Consists of 7 profiles

and 7 counter profiles. 2straight templates for tenon

cut and general shaping.

C60-002

Tiffany Design1" rise to top of flat. 9 pro-

files and 9 counter pro-files.

C60-005-2 - Odd No.s C60-005 - Even No.s

Reliable Cutting Tools handles all Template and Accessory orders.Call 1-800-424-9154 for Pricing, details and ordering information of the fol-lowing examples of templates available and many other accessories options.

Custom Templates Made to Customer Specifications

The DoorCrafter - 913The DoorCrafter - 913Starter Set Templates 3M/3F 4” Industrial ArchStarter Set Templates 3M/3F 4” Industrial Arch

Panels from 25” to 36” wide. Top Rail to 4-1/4”. For use on any HeavyDuty Spindle Shaper for arched top rail and arched panels. Has

4 Heavy Duty Pneumatic Clamping Cylinders with air flotation andthumb control with On/Off valve.

Applications do NOT include kitchen cabinets

Features:• Aircraft Aluminum • Pneumatic Clamping • 2.0 CFM• Full Guarantee • Fast and Safe• Made in the USA • 85 lbs.

DC-913$3,150.00$3,150.00

• 1-15/16” Tenon Thickness with Standard Handles• 3-1/2” Tenon Thickness 2 Handles - $400.00• 4-5/8” Tenon Thickness with 3 Handles - $550.00

Patriot Design

Referred to as "Point to Point"or "Eyebrow". 1" rise, gentle

curve from stile to stile.

IT

ITEM DECRIPTION

C60-000 9M/9F; Assorted C60-000-1 10M/10F; 3” to 7.5” C60-000-2 10M/10F; 8” to 12.5” C60-000-3 10M/10F; 13” to 17.5” C60-000-4 10M/10F; 18” to 22.5”




PART# DESCRIPTION PRICE

2 sided 1 HoleSI-201215SI-201215 20 x 12 x 1.520 x 12 x 1.5 $24.39 $24.39 SI-251215SI-251215 25 x 12 x 1.525 x 12 x 1.5 $38.88 $38.88

4 sided 1 HoleSI-121215SI-121215 12 x 12 x 1.512 x 12 x 1.5 $24.34 $24.34 SI-141420SI-141420 14 x 14 x 2.014 x 14 x 2.0 $22.58 $22.58 SI-14614625SI-14614625 14.6 x 14.6 x 2.514.6 x 14.6 x 2.5 $51.19 $51.19 SI-151525SI-151525 15 x 15 x 2.5 15 x 15 x 2.5 w/ 150mm Radius $53.95 $53.95

2 sided 2 HoleSI-301215SI-301215 30 x 12 x 1.5 14 CTC30 x 12 x 1.5 14 CTC $28.31 $28.31 SI-401215SI-401215 40 x 12 x 1.5 26 CTC40 x 12 x 1.5 26 CTC $40.61 $40.61 SI-501215SI-501215 50 x 12 x 1.5 26 CTC50 x 12 x 1.5 26 CTC $42.46 $42.46 SI-601215SI-601215 60 x 12 x 1.5 26 CTC60 x 12 x 1.5 26 CTC $61.09$61.09

4 sided 2 Hole (14 CTC) plungeSI-2958015SI-2958015 29.5 x 8 x 1.529.5 x 8 x 1.5 $69.53 $69.53 SI-2959015SI-2959015 29.5 x 9 x 1.529.5 x 9 x 1.5 $57.44 $57.44 SI-2951215SI-2951215 29.5 x 12 x 1.529.5 x 12 x 1.5 $57.44 $57.44 SI-301215PSI-301215P 30 x 12 x 1.530 x 12 x 1.5 $57.44$57.44

PART # DESCRIPTION PRICEradius Knives

SIR-121452LSIR-121452L 12 x 14.5 x 2 LH 12 x 14.5 x 2 LH 2mm Radius $182.03 $182.03 SIR-121452RSIR-121452R 12 x 14.5 x 2 RH 12 x 14.5 x 2 RH 2mm Radius $182.03 $182.03

radius KnivesSIR-151452LSIR-151452L 15 x 14.5 x 2 LH 15 x 14.5 x 2 LH 3mm Radius $168.80 $168.80 SIR-151452RSIR-151452R 15 x 14.5 x 2 RH 15 x 14.5 x 2 RH 3mm Radius $168.80$168.80

4 sided 2 Hole (26 CTC) plungeSI-3951215SI-3951215 39.5 x 12 x 1.539.5 x 12 x 1.5 $69.85 $69.85

4 sided 3 Hole (37 CTC)SI-501017SI-501017 50 x 10 x 1.750 x 10 x 1.7 $92.07 $92.07

2 sided Back grooveSI-305511BGSI-305511BG 30 x 5.5 x 1.1 30 x 5.5 x 1.1 Back Groove $38.02 $38.02 SI-405511BGSI-405511BG 40 x 5.5 x 1.1 40 x 5.5 x 1.1 Back Groove $40.61$40.61

2 sided face grooveSI-305511FGSI-305511FG 30 x 5.5 x 1.1 30 x 5.5 x 1.1 Face Groove $37.56 $37.56 SI-405511FGSI-405511FG 40 x 5.5 x 1.1 40 x 5.5 x 1.1 Face Groove $38.67$38.67SI-505511FGSI-505511FG 50 x 5.5 x 1.1 50 x 5.5 x 1.1 Face Groove $44.66$44.66

All insert Knives come in Boxes of 10

SOUTHEAST TOOL

Standard Reversible Insert Knives



ChUCK, STyLe 1For all types of machines where a 7/16˝-14 threaded shank is needed.

Threadedshank7/16˝-14 Drillisheldinplacewithasetscrew.Part Hole Outer Overall Rotational

Number Diameter Diameter Length Direction

SE11125R 1/8˝ 5/8˝ 1-1/2˝ rightSE11156R 5/32˝ 5/8˝ 1-1/2˝ rightSE11187L 3/16˝ 5/8˝ 1-1/2˝ leftSE11187R 3/16˝ 5/8˝ 1-1/2˝ rightSE11218L 7/32˝ 5/8˝ 1-1/2˝ leftSE11218R 7/32˝ 5/8˝ 1-1/2˝ rightSE11250L 1/4˝ 5/8˝ 1-1/2˝ leftSE11250R 1/4˝ 5/8˝ 1-1/2˝ rightSE11281L 9/32˝ 5/8˝ 1-1/2˝ leftSE11281R 9/32˝ 5/8˝ 1-1/2˝ rightSE11312L 5/16˝ 7/8˝ 2-3/8˝ leftSE11312R 5/16˝ 7/8˝ 2-3/8˝ rightSE11375L 3/8˝ 7/8˝ 2-3/8˝ leftSE11375R 3/8˝ 7/8˝ 2-3/8˝ rightSE11393L 10mm 7/8˝ 2-3/8˝ leftSE11393R 10mm 7/8˝ 2-3/8˝ rightSE11437L 7/16˝ 7/8˝ 2-3/8˝ leftSE11437R 7/16˝ 7/8˝ 2-3/8˝ rightSE11500L 1/2˝ 7/8˝ 2-3/8˝ leftSE11500R 1/2˝ 7/8˝ 2-3/8˝ right

Chuck,Style1

Your Choice $22.00 Each.

high-Speed Steel

M2Steel

SOUTHEAST TOOL

Carving Rougher BitsPart

Number Diameter Rotation Shank

1/4˝1/4˝SECR500LH 1/2˝ LH 1/4˝

1/4˝1/4˝SECR625LH 5/8˝ LH 1/4˝

111mm1mmSECR625RH-1SECR625RH-111 5/8˝5/8˝SECR625LH-11 5/8˝ LH 11mm

1/4˝1/4˝SECR750LH 3/4˝ LH 1/4˝

111mm1mmLH 11mm

1/2˝1/2˝

SECR750RH-1SECR750RH-111 3/4˝3/4˝SECR750LH-11 3/4˝SECR750RH-12SECR750RH-12 3/4˝3/4˝SECR750LH-12 3/4˝ LH 1/2˝

1/4˝1/4˝SECR1000LH 1˝ LH 1/4˝

SECR625RHSECR625RH 5/8˝5/8˝ RHRH

RHRH


RHRH

RHRH


SECR1000RHSECR1000RH 1˝1˝ RHRH

Price

$18.58$18.58$18.58$18.58$28.10$28.10$20.37$20.37$32.39$32.39$24.02$24.02$42.19$42.19

Roundnose Carving Bits

M2Steel

Part Number Diameter Rotation Shank

SERC500RH 1/2˝ RH 1/4˝SERC500LH 1/2˝ LH 1/4˝SERC750RH 3/4˝ RH 1/4˝SERC750LH 3/4˝ LH 1/4˝

Price

$29.03$29.03$43.47$43.47

high-Speed Steel

high-Speed SteelCarving Pod Bits

M2Steel

Part Cutting Overall Number Diameter Length Rotation Length

SEPD125LH 1/8˝ 3/4˝ LH 3˝SEPD125RH 1/8˝ 3/4˝ RH 3˝SEPD187LH 3/16˝ 1˝ LH 3˝SEPD187RH 3/16˝ 1˝ RH 3˝

3˝3˝SEPD250RH 1/4˝ 1˝ RH 3˝

3˝3˝SEPD375RH 3/8˝ 1˝ RH 3˝SEPD375LHSEPD375LH 3/8˝3/8˝ 1˝1˝ LHLH

SEPD250LHSEPD250LH 1/4˝1/4˝ 1˝1˝ LHLH

Price

$12.05$12.05$12.05$12.05$12.05$12.05$19.06$19.06

Square Corner Chisel

SE9600Part

Number Radius

SE9600 1/4˝Price

$19.06



PART QUANTITY PRICE

SPB 1000SPB 1000 1,000 $25.001,000 $25.00SPB 5000 5,000SPB 5000 5,000 $99.75 ($19.95/1000)$99.75 ($19.95/1000)SPB 10000 10,000SPB 10000 10,000 $175.00 ($17.50/1000)$175.00 ($17.50/1000)SPB 25000 25,000SPB 25000 25,000 $375.00 ($15.00/1000)$375.00 ($15.00/1000)SPB 50000SPB 50000 50,000 50,000 Call For Price

ATTENTION MAKERS OF SOLID PANEL CABINET DOORS

This simple accepted expansion joint is the inexpensive solution to your age-old problem!

In addition to making the assembly process for Solid Panel Cabinet Doors easier, Space Balls also offer the following features to assure perfect assembly each and every time:

Space Ball Features:• Automatically center panels in the assembling process.• Expand and contract as the panel does due to various temperature

conditions.• Eliminate panel Rattle.• Helps eliminate Cracking of glue joints.• Space Balls will cut out most major call-backs on solid or flat panel doors.

Space Balls are 1/4" neoprene rubber balls that are resilient to extreme temperatures. Typically in the winter, raised panels will shrink causing the fit between the panel and the frame to become lose. This addition of space between the two joints is enough to cause the frame to rattle, even from the slightest types of vibration such as walking. The materials used to make Space Balls allow for them to contract and expand when necessary allowing the cabinet door to retain it's true shape and fit.It is recommended that 8 to 10 Space Balls be used per door. Simply insert the balls into the groove between the panel and the frame, not between the fame pieces (see illustration on the left).

Cabinet Panel

Cabinet Frame

Cabinet Frame

Space Balls

Space Ball

Cabin

et F

ram

e

Cabinet Door Profiles and Space Balls shown are not Actual Size.

Space Balls are 1/4” neoprene rubber.



Flexible Hose Connector PiecesFlexible Hose Connector PiecesPART TYPE SIZE PRICE

W1011W1011 Reducer 4 to 34 to 3 $1.50W1020W1020 Reducer 3 to 23 to 2W1037W1037 Reducer 5 to 45 to 4 $4.30$4.30W1012W1012 T Shape 33W1013W1013 T Shape 44W1014W1014 Y Shape 33W1015W1015 Y Shape 44W1016W1016 Elbow 33 $4.40W1017W1017 Elbow 44W1018W1018 Splicer 33W1019W1019 Splicer 44W1041W1041 Adapter 2-1/2 x 32-1/2 x 3 $1.30$1.30W1044W1044 Adapter 2-1/2 x 42-1/2 x 4

Reducer T Shape Y Shape

Elbow Splicer Adapter

Floor SweepFloor SweepPART O.D. HEIGHT PRICE

W1003W1003 44 3-1/23-1/2

Universal Dust PortsUniversal Dust PortsPART SIZE PRICE

W1041W1041 2-1/2 x 3/4 2-1/2 x 3/4 wide $1.30$1.30

Universal Dust HoodUniversal Dust HoodPART W1010W1010SIZE 6-1/4 x 6-1/46-1/4 x 6-1/4THICKNESS 3-323-32O.D. 44FLANGE 3/43/4PRICE $1.80$1.80

Wire Hose ClampsWire Hose ClampsPART SIZE PRICE

W1315W1315 22 $0.54$0.54W1316W1316 33 $0.64$0.64W1317W1317 44 $0.84$0.84W1318W1318 55 $0.84$0.84W1319W1319 66 $0.94$0.94

Wire Reinforced Clear HoseWire Reinforced Clear Hose((Not GroundedNot Grounded))PART SIZE PRICE

W1034W1034 4" x 10'4" x 10' $54.10$54.10W1035W1035 5" x 10'5" x 10'W1036W1036 6" x 10'6" x 10' $66.30$66.30

CLEAR HOSES DO NOT QUALIFYFOR THE FREE FREIGHT OFFER, REGARDLESS OF PURCHASE TOTAL.

Universal AdapterUniversal AdapterPART OVERALL SIZE PRICE

W103W1039 L x 6 W x 6 D9 L x 6 W x 6 D $6.70$6.70

Seven-step adapter provides a multitude of dustcollection reducing options.Simply cut awayunneeded steps with a hacksaw. Outside diameterstep sizes include 1", 2", 2-1/2", 3", 4", 5" and 6".Wall thickness is 1/8”.

Table Saw Dust HoodTable Saw Dust HoodPART SIZE THICK O.D. FLANGE PRICE

W1004W1004 12-1/4 x12-1/4 x 2-1/2 3/32 412-1/4 x12-1/4 x 2-1/2 3/32 4 3/43/4W1005W1005 14 x 14 x 2-1/214 x 14 x 2-1/2 3/323/32 44 3/43/4 $4.90$4.90

These hoods are designed to fit most 8",10" and 12" con trac tor-typeta ble saws, for eign and do mes tic.

Jointer Dust HoodJointer Dust HoodPART SIZE THICKNESS O.D. FLANGE PRICE

W1001W1001 8-1/4 x 8-1/48-1/4 x 8-1/4 3/323/32 44 3/43/4 $2.30$2.30W1002W1002 8-1/2 x 10-1/48-1/2 x 10-1/4 3/323/32 44 3/43/4 $2.80$2.80

W1001 fits over a 6-1/2 x 6-1/2 chute and the W1002 fits over a 7x 8-1/2 chute.

$1.30

$4.20$7.60$4.40$7.30

$1.60

$3.40$2.00$6.30

$6.30 $5.00

$62.60



Quick DisconnectQuick DisconnectDesigned to attach to the end of a 4" diameter dust hood for a quickand easy friction fit. Ideal for use with smaller capacity, mobile dustcollectors to service multiple machines. Eliminates the need to con-nect and disconnect a hose clamp each time anew woodworking machine is used. Stayssecure and airtight.

• Material Thickness: 1/8"• Small Outside Diameter: 3-7/8"• Large Outside Diameter: 4-1/4"• Length: 4"• Weight: 21 lb W1038 $3.60$3.60

ABS Plastic Blast GatesABS Plastic Blast GatesPART SIZE PRICE

W1006W1006 33 $2.60$2.60W1007W1007 44W1008W1008 55 $6.80$6.80W1009W1009 66 $8.40$8.40

Aluminum Blast GatesAluminum Blast GatesPART SIZE PRICE

W1141W1141 33W1142W1142 44

W1049 Dust Collection SeparatorW1049 Dust Collection SeparatorIn creas es the ef fi cien cy and ca pac i ty of a stan dard 30-gal lon met al trash can*, this mold ed ABS fit ting is engineered touse cy clon ic ac tion to drop out larg erpar ti cles from the dust flow. The fitting

fea tures mold er in lets and out lets whichcan be easily con nect ed to stan dard sys tems us ing 4" flex i ble hose.

* Met al trash can must be used forground ing pur pose. Fits cans with 20"to 21" di am e ter open ing.

W1049 $34.30$34.30

W2049 Mini Dust Collections SeparatorW2049 Mini Dust Collections SeparatorDesigned to be used with any 2½" diameterShop-Vac® into a two-stage dust collectionsystem. The Mini Dust collection Separatorincreases the capacity and ef fi cien cy of the typical Shop-Vac® by allowing heavier particles to drop out of the system before they reach the main container. Finerparticles can also be trapped by adding a small amount of water to the bottom of thebucket. Clean-ups are easy because the Mini Dust Collection Separator just lifts off of the buck et. The Mini Dust Collection Separator makes shop clean-up a breeze!

W2049 $25.60$25.60

W2046 2-1/2" Hose AdapterW2046 2-1/2" Hose AdapterThis fitting allows you to use our standard 2-1/2" dustcol lec tion hose with the Mini Dust CollectionSeparator, giving you many use options. A 2-1/2" dust port is standard on many makes of band saws,belt sanders and other woodworking machines. Yourcustomers will be looking for use options, so don'tmiss this important item.

W2046 $4.10$4.10

W1050 Dust Collection HandbookThis book skillfully guides the wood work erthrough all the steps necessary in the design and con struc tion of an efficient dust collectionsystem and pro vides tips for easy in stal la tion.Fifty pages of con cise in for ma tion in clud ing photographs and il lus tra tions. A must forsetting up a dust col lec tion system.

W1050 $6.00$6.00

WOODSTOCK

Power Feeder WheelsPART # DESCRIPTION PRICE

PF3JR-24962891166289118

Small WheelsLarge Wheels Set of 3Large Wheels Set of 4

$20.00 ea$69.00$92.00

Specifications Small Wheels: Diameter - 3-1/8", Width - 1-1/8", Bore - 7/8".

Specifications Large Wheels:Diameter - 4-3/4", Width - 2-1/4", Bore - 1-1/4".

$3.20

$9.00$12.50



W1218A RotractorW1218A RotractorAdjust knifes and rollers on planers and drum sanders easily. The mag net ic base keeps the Rotractor firm ly in position. Thein di ca tor in dex es at 0°, 90°, 180°, 270°,

and mea sures to +-.001". An ex treme ly pre cise and use ful tool!

W1218 $114.00$114.00

WOODSTOCK Slickplane™

PART DESCRIPTION PRICE

W1100W1100 Slickplane-w/ W1101W1101W1101 CT radius blades/pair $10.70$10.70W1102W1102 CT chamfer blades/pair $10.70$10.70

Produces an ex cep tion al ly smooth 1/8" radius or a 45 degree cham -fer. Crafted from select rock maple and is designed to fit com fort ablyin your hand. A brass sole glides easily along the workpiece edgewhile two carbide-tipped cutters put on the finishing touch. The cut-ters are easily replaced and can be in de pen dent ly adjusted for com-plete depth of cut control.

Jointer Pal™ Magnetic Jointer Jointer Pal™ Magnetic Jointer Knife Setting JigsKnife Setting JigsPART DESCRIPTION PRICE

W1210AW1210A Polycarbonate Bodied Jig for 4"-8"Jointers w/ HSS knives $34.00$34.00W1211AW1211A Steel bodies Jig for 4"-8" Jointers w/ HSS knives $56.00$56.00W1212W1212 Carbide Jig for 4"-8" Jointers w/ Carbide or HSS knives $77.00$77.00

The Jointer Pal™ knife setting systemlets you set jointer knives in perfect

align ment every time! It also allows you to shift nicked knives to get a perfect cut to anaccuracy of +-.001". We offer knives-settingextensions for almost all jointers.

W1226A Mini Planer Pal®We have taken our patented magnetic technology and developed aknife setting jig for all portable planers with standard 1-7/8" to 2-1/8"cutter heads. With over 1 million of these planers on the market, theMini Planer Pal® is a very popular tool. The Mini Planer Pal® allowsyou to set knives perfectly every time to within + 001". Sold in pairsonly.

W1226A $30.00$30.00

$21.00

Planer Pal® JigsPART DESCRIPTION PRICE

WW11221166 Standard Jig for Steel Knives - PairW1215A Carbide Jig for Steel or Carbide Knives - Single $110.00

The patented knives-set ting systemlets you set planer knives in perfectalign ment every time! It also allowsyou to shift nicked knives in 2-1/2" - 4" cutter heads to get a perfect cut with an accuracy of +-.002". Two Jigs are needed for 15" to 20" plan ers; three jigs for plan ers over 20". For 12" and small er planers with 1-7/8" to 2-1/8" cutterheads, use the Plan erPal® W1226..

$99.00



WOODSTOCK Precision Stop BlockPrecision Stop BlockPART DESCRIPTION PRICE

W1205W1205 6' Left Reading Tape (Measures from right to left) $9.70$9.70W1206W1206 6' Right Reading Tape (Measures from left to right) $9.70$9.70W1109W1109 Broset Precision Stop Block $48.80$48.80

The BROSET® precision stop blocksare great labor-saving de vic es whencross cut ting on miter and radial armsaws. They can even be used onrouter tables and shapers to precise-ly limit the travel of the workpiece.Ideal for cutting mul ti ple pieces tothe same size, they also eliminate mea sur ing, marking and ad just ingthe work piece to the saw blade when cutting single piec es. TheBROSET® is designed for use with self-stick measuring tape (option-al) for instant positioning, and features micro-adjustable stops andtwo magnified hairline cursors for left and right of the blade operation.Works with fences from 1-1/2" to 2" wide.

Dial IndicatorsDial IndicatorsPART DESCRIPTION PRICE

D1056D1056 1/2" TRAVEL x 0.001"D1057D1057 1" TRAVEL x 0.001"

Dial indicators are a necessity in any shop - wood work ing and metalworking alike. Use them with magnetic bases for measuring run-out, setting up tools and check ing align ment.

CalipersCalipersPART DESCRIPTION PRICE

$45.20$45.20D1052 6" Dial Cal i per D1053 8" Dial Cal i per $70.00$70.00

These pre ci sion Dial and Ver ni er Cal i pers can mea sure small part siz es and thick ness of ev ery thing from lum berto sheets of pa per. Easy one-hand

op er a tion pro vides in side, out side anddepth mea sure ments in pre cise .001" in cre ments.

W1320 Router PadsW1320 Router PadsThese handy rubber workpads are in dis pens able forrouting. All pads are 24" widex 36" long and 1/8" thick.

W1320 $13.40$13.40

Dead Blow HammersDead Blow HammersPART WEIGHT PRICE

D1084D1084 8 oz.8 oz. $13.40$13.40D1085D1085 16 oz.16 oz. $17.00$17.00D1086D1086 24 oz.24 oz. $24.20$24.20D1087D1087 32 oz.32 oz. $33.30$33.30

These hammers belong in thetoolboxes of woodworkersand machinists alike. Unlikerubber mallet’s, dead blowhammers won’t bounce offyou work. Sealed lead shot inthe hammers head deliversall the kinetic force to thecontact point - exactly whereit should be.

D1058 Magnetic Bases for Dial IndicatorsD1058 Magnetic Bases for Dial IndicatorsThis high qual i ty base has a very strong mag -net that is easy ac ti vat ed with a con ve nientswitch. Mounts at any an gle and has a fine-ad just ment arm.

D1058 $32.20$32.20

$18.50$21.90



A necessity for the safety-conscious woodworker, our BOARD BUD DIES®maintain simultaneous, even pressure against the table and fence. Your customerswill find that using them will result in safer, clean er cutting operations. AllBOARD BUDDIES® are completely adjustable to ac com mo date various lumberthick ness es. BOARD BUD DIES® are shipped two per set and mount directlyonto your customers' shop-made wood fences. Optional sliding tracks avail able.For Radial Arm Saws these BOARD BUDDIES® feature orange wheels thatturn counter-clock wise to pre vent kickback on radial arm saws and router tables.Mounts to fences 3" - 31/2" high x 1" or wider.

W1104 For Table Saws and Router Tables. The yellow wheels on theseBOARD BUD DIES® turn clockwise to pre vent kick back on table saws androuter ta bles. Mounts to fences 3" to 3-1/2" high x 1" or wider. $65.30

W1105 For Shapers. These BOARD BUDDIES® are made from die-castaluminum and fea ture non-mar ring green neoprene rubber wheels. Because thewheels turn in both di rec tions, they function as hold-downs rather than anti-kickback de vic es. Mounts to fenc es 3" - 3½" high x 1" or wider. $65.30

W1106 For Radial Arm Saws. These BOARD BUDDIES® featureorange wheels that turn counter-clock wise to prevent kickback on radialarm saws. Mounts to fence 3" to 3-1/2" high x 1" or wider. $58.30

Optional Tracks for Board Buddies®W1107 - 12" Track $16.50W1108 - 24" Track $29.00

Shop Fox Right Angle JigShop Fox Right Angle JigPRICEPART DESCRIPTION

W1500 Shop Fox Right Angle Jig

Cut tenons, dadoes, rail ends, finger joints, etc. safely and with complete ac cu ra cy.

Other benefits includes:• Eliminates the need to construct many otherjigs and fixtures.

• Amazingly af ford able.• Simple to set up and use.• Extremely durable.• Easily adjustable.• Offers increased operator safety.

Specifications:Depth (Fully Extended): 13"Depth (Closed) 7-1/2"Width: 13"Height: 8"Miter Bar Size: 3/8" x 3/4" x 11"Handholds: 45°, MouldedMax. Horizontal Opening: 1-3/4" x 8"

W1301 6" Vice ClampW1301 6" Vice ClampOur Vise Clamps adjust quickly andeasily to lock your work piece in anypo si tion. The clamping pad pivots toconform to any work piece, ensuringuniform pres sure.

W1301

Woodworking Accessories - Board BuddiesWoodworking Accessories - Board Buddies®®

W1323A Clamping Miter GaugeW1323A Clamping Miter GaugeOur Clamping Miter Gauge is safer than stan dard miter gauges. Ithas a com fort able D-han dle grip, built-in sliding stop, and positivetrig ger clamp ing ac tion. It fits standard miter gauge slots, 3/8" x 3/4",with pos i tive angle stops at 90° and 45° both left and right. Bar ex -tends to 12".

W1323A

WOODSTOCK

$60.00

$15.50

$274.50



SteelexSteelex®® Sharpening Stone HolderSharpening Stone Holderwith Rubber Basewith Rubber BaseRubber body keeps sharpening stones from sliding around the benchtop during honing. Chrome plated hardware resists rust when usingwaterstones. Adjusts from 5 1/2” to 9” to fit a wide range of stonesizes.

D1091 $18.10$18.10

D1044 Honing GuideD1044 Honing GuideThe proper bevel angle is crucialfor keeping a sharp edge.OurSteelex® honing guide ensuresthe perfect angle every time.

D1044

WaterstonesWaterstonesPART GRIT PRICE

D1067D1067 800800D1068D1068 10001000 $36.00$36.00D1069D1069 12001200D1070D1070 60006000 $74.50$74.50D1071D1071 80008000 $145.90$145.90D1130D1130 1000 / 60001000 / 6000

Woodworkers of all skill levels are turning to Japanese waterstones to keep their tool edges sharp. This isbecause waterstones cut more aggressively, and a sharp edge can be achieved much faster. Waterstonesalso polish as they hone, allowing a mirror finish without the need for stropping or polishing compounds. Only water is needed to lubricate the cutting edge.

PRO-STICKPRO-STICK®® Abrasive Belt Abrasive Belt and Disc Cleanerand Disc CleanerPART SIZE PRICE

W1307W1307 2" x 2" x 12"2" x 2" x 12" $17.10$17.10W1307 Buy 2-5W1307 Buy 2-5 2" x 2" x 12"2" x 2" x 12" $14.54$14.54W1307 Buy 6 or moreW1307 Buy 6 or more 2" x 2" x 12"2" x 2" x 12" $12.83$12.83

SteelixSteelix®® Oilstone Sharpening KitOilstone Sharpening KitThis all-in-one handles most woodworkers’ honing chores. Includes a D1117 8" combination(coarse/medium) aluminum oxidesharpening stone, our D1044 honingguide, a 1 oz bottle of honing oil anda special non slip rubber pad.

D1118

W1053 Grounding KitW1053 Grounding KitAll dust collection systems build up static electricity, and if not grounded,that electricity becomes a hazard thatcould start a fire. Our grounding kit provides everything you need to ground a dust collection system, including directions for installation. Alarge system may need more than onekit, so keep plenty of these on hand.This safety accessory is essential toany complete dust collection assort-ment.

W1053 $12.50$12.50

W1400 Push BlockW1400 Push BlockPush blocks are constructed of high-impact molded plastic with natural rubberfriction pads that grip the work piece firm-ly. Woodworkers can work with confi-dence knowing that these pads arebetween their fingers and the cutting tool.Bright, safe ty-orange color makes themeasy to find.

W1400 $4.60$4.60

WOODSTOCK

$17.50

$11.50

$29.50

$37.50

$53.00



3/4" Bore Rub Collar3/4" Bore Rub CollarPART O.D. x I.D. PRICE

W1114W1114 1-5/8 x 3/41-5/8 x 3/4 $14.70$14.70W1115W1115 1-11/16 x 3/41-11/16 x 3/4 $16.20$16.20W1116W1116 1-3/4 x 3/41-3/4 x 3/4 $16.20$16.20W1117W1117 1-27//32 x 3/41-27//32 x 3/4 $16.20$16.20W1118W1118 1-7/8 x 3/41-7/8 x 3/4 $16.20$16.20W1119W1119 2 x 3/42 x 3/4 $17.10$17.10W1120W1120 2-1/8 x 3/42-1/8 x 3/4 $17.10$17.10W1121W1121 2-3/16 x 3/42-3/16 x 3/4 $18.00$18.00W1122W1122 2-5/8 x 3/42-5/8 x 3/4 $18.40$18.40W1123W1123 2-15/16 x 3/42-15/16 x 3/4 $18.90$18.90W1132W1132 2-1/16 x 3/42-1/16 x 3/4 $17.10$17.10W1133W1133 2-1/4 x 3/42-1/4 x 3/4 $18.40$18.40W1134W1134 2-5/16 x 3/42-5/16 x 3/4 $18.00$18.00W1135W1135 2-3/8 x 3/42-3/8 x 3/4 $18.00$18.00W1136W1136 2-7/16 x 3/42-7/16 x 3/4 $18.40$18.40W1137W1137 2-1/2 x 3/42-1/2 x 3/4 $18.40$18.40W1138W1138 2-9/16 x 3/42-9/16 x 3/4 $18.90$18.90W1139W1139 2-11/16 x 3/42-11/16 x 3/4 $18.90$18.90W1140W1140 2-3/4 x 3/42-3/4 x 3/4 $19.30$19.30W1143W1143 2-13/16 x 3/42-13/16 x 3/4 $18.90$18.90W1144W1144 2-7/8 x 3/42-7/8 x 3/4 $18.90$18.90

Custom size rub bearings are also available

upon request.

1/2" Bore Rub CollarPART O.D. x I.D. PRICE

W1110W1110 1-1/8 x 1/21-1/8 x 1/2 $9.10$9.10W1111W1111 1-1/4 x 1/21-1/4 x 1/2 $9.90$9.90W1112W1112 1-3/8 x 1/21-3/8 x 1/2 $12.90$12.90W1113W1113 1-1/2 x 1/21-1/2 x 1/2 $13.90$13.90

Double T-BushingsDouble T-BushingsPART O.D. x I.D. x O.A. HT. PRICE

W1179W1179 1-1/4 x 1 x 7/81-1/4 x 1 x 7/8 $5.10W1180W1180 1-1/4 x 3/4 x 7/81-1/4 x 3/4 x 7/8 $4.80$4.80W1181W1181 1 x 3/4 x 3/41 x 3/4 x 3/4 $4.50$4.50W1182W1182 3/4 x 1/2 x 11/163/4 x 1/2 x 11/16 $4.30$4.30

T-BushingsT-BushingsO.D. x I.D. x

PART SHANK HT. x O.A. HT. PRICE

W1151W1151 1-1/4 x 1 x 1/4 x 3/81-1/4 x 1 x 1/4 x 3/8 $3.50$3.50W1152W1152 1-1/4 x 3/4 x 1/4 x 3/8 $3.501-1/4 x 3/4 x 1/4 x 3/8 $3.50W1153W1153 1 x 3/4 x 1/4 x 3/81 x 3/4 x 1/4 x 3/8 $3.50$3.50W1154W1154 3/4 x 1/2 x 3/16 x 5/163/4 x 1/2 x 3/16 x 5/16 $2.40$2.40W1183W1183 Deluxe T-bushing Set of 88 $25.30$25.30

(2 of each size T-bushing)

1-1/4" Bore Rub Collar1-1/4" Bore Rub CollarPART O.D. x I.D. PRICE

W1124W1124 2-1/4 x 1-1/42-1/4 x 1-1/4 $25.20$25.20W1125W1125 2-1/2 x 1-1/42-1/2 x 1-1/4 $26.30$26.30W1126W1126 2-3/4 x 1-1/42-3/4 x 1-1/4 $26.30$26.30W1127W1127 3 x 1-1/43 x 1-1/4 $26.10$26.10W1128W1128 3-1/4 x 1-1/43-1/4 x 1-1/4 $26.10$26.10W1129W1129 3-3/8 x 1-1/43-3/8 x 1-1/4 $27.00$27.00W1130W1130 3-1/2 x 1-1/43-1/2 x 1-1/4 $28.40$28.40W1131W1131 4 x 1-1/44 x 1-1/4 $30.30$30.30

Custom size rub bearings are also available upon request.

Long T-BushingsLong T-BushingsO.D. x I.D. x

PART SHANK HT. x O.A. HT. PRICE

W1147W1147 1-1/4 x 1 x 1-3/16 x 1-5/16 $5.801-1/4 x 1 x 1-3/16 x 1-5/16 $5.80W1148 W1148 1-1/4 x 3/4 x 1-3/16 x 1-5/16 $5.801-1/4 x 3/4 x 1-3/16 x 1-5/16 $5.80W1149W1149 1 x 3/4 x 1-3/16 x 1-5/16 $5.701 x 3/4 x 1-3/16 x 1-5/16 $5.70W1150 3/4 x 1/2 x 1-3/16 x 1-5/16 $5.00W1150 3/4 x 1/2 x 1-3/16 x 1-5/16

Spacers for 1/2" SpindlesSpacers for 1/2" SpindlesPART O.D.xI.D.xO.A. HT. PRICE

W1159W1159 1 x 1/2 x 1/41 x 1/2 x 1/4 $2.30$2.30W1160W1160 1 x 1/2 x 3/81 x 1/2 x 3/8 $2.30$2.30W1161W1161 1 x 1/2 x 1/21 x 1/2 x 1/2 $2.50$2.50W1162W1162 1 x 1/2 x 3/41 x 1/2 x 3/4 $2.70$2.70W1163W1163 1 x 1/2 x 11 x 1/2 x 1 $2.90$2.90

Straight BushingsStraight BushingsPART O.D. x I.D. x O.A. HT. PRICE

W1155W1155 1-1/4 x 1 x 7/161-1/4 x 1 x 7/16 $2.80$2.80W1156W1156 1-1/4 x 3/4 x 7/161-1/4 x 3/4 x 7/16 $2.70$2.70W1157W1157 1 x 3/4 x 7/161 x 3/4 x 7/16 $2.50$2.50W1158W1158 3/4 x 1/2 x 7/163/4 x 1/2 x 7/16 $2.40$2.40

Spacers for 3/4" SpindlesSpacers for 3/4" SpindlesPART O.D.xI.D.xO.A. HT. PRICE

W1164W1164 1-1/4 x 3/4 x 1/41-1/4 x 3/4 x 1/4 $3.00$3.00W1165W1165 1-1/4 x 3/4 x 3/81-1/4 x 3/4 x 3/8 $2.90$2.90W1166W1166 1-1/4 x 3/4 x 1/21-1/4 x 3/4 x 1/2 $3.30$3.30W1167W1167 1-1/4 x 3/4 x 3/41-1/4 x 3/4 x 3/4 $3.20$3.20W1168W1168 1-1/4 x 3/4 x 11-1/4 x 3/4 x 1 $3.30$3.30

Spacers for 1" SpindlesSpacers for 1" SpindlesPART O.D.xI.D.xO.A. HT. PRICE

W1169W1169 1-1/2 x 1 x 1/41-1/2 x 1 x 1/4 $3.40$3.40W1170W1170 1-1/2 x 1 x 3/81-1/2 x 1 x 3/8 $3.40$3.40W1171W1171 1-1/2 x 1 x 1/21-1/2 x 1 x 1/2 $3.40$3.40W1172W1172 1-1/2 x 1 x 3/41-1/2 x 1 x 3/4 $3.60$3.60W1173 1-1/2 x 1 x 1W1173 1-1/2 x 1 x 1 $3.90$3.90

Spacers for 1-1/4" SpindlesSpacers for 1-1/4" SpindlesPART O.D.xI.D.xO.A. HT. PRICE

W1174W1174 1-3/4 x 1-1/4 x 1/41-3/4 x 1-1/4 x 1/4 $4.20$4.20W1175W1175 1-3/4 x 1-1/4 x 3/81-3/4 x 1-1/4 x 3/8 $4.20$4.20W1176W1176 1-3/4 x 1-1/4 x 1/21-3/4 x 1-1/4 x 1/2 $4.10$4.10W1177W1177 1-3/4 x 1-1/4 x 3/41-3/4 x 1-1/4 x 3/4 $4.50$4.50W1178W1178 1-3/4 x 1-1/4 x 11-3/4 x 1-1/4 x 1 $4.60$4.60

WOODSTOCK



THE DOOR STORE - Ballew SawDuty Spindle Shaper for arched top rail and arched panels. Has 4 Heavy...

Documents

Transcript of THE DOOR STORE - Ballew SawDuty Spindle Shaper for arched top rail and arched panels. Has 4 Heavy...