The Deputy General Manager Bank Of Baroda, Regional Office ...

To,

Date :

The Deputy General Manager

Bank Of Baroda,

Regional Office, Bengaluru Rural,

M.G.Road, Bangalore.560 001

BOQ OF THE INTERIOR FURNISHING WORK FOR BANK OF BARODA AT CHIKKABALLAPUR BRANCH

SI

NO

DESCERIPTION OF WORK QTY UNITS RATE AMOUNT

PARTITION

1.0 Fully Glazed Partition : -

Entrance Fully glazed partition and manager cabin

partition (north side) and door of size 3'0"x7'0",

main entrance door of size 3'6"x7'0" using 3"x21/2"

teak wood frame fixed with 12mm thick glass with

alround frames mounted. on heavy duty floor

spring (Everite / Hardwyn). 4"x3" wooden frames

alround side with melamine polish finish. The glass to

be fixed with 3/4" designed Teak wood beadings. All

exposed wooden partition to be in melamine polish

finish.Handles should be of size 12" in SS satin finish

approv ed by Architect.

85.00 Sft

2.0 Partly Glazed Partition : -

Partly glazed partition manager cabin (west side)

partitionto be done using Jindal aluminium

rectangular sections of 63.5mmx38.1mm Aluminium

frame 1.70 mm thickness fixed with 6mm plywood

on both sides finished with 1mm laminate sheet

(approved colour) for bottom 3'0" and upto ceiling

and middle portion with 8mm glass withetching

design/ bank logo for 4'0" ht. fixed with teak/beach

wood beading work and all the exposed wood

portion inmelamine polish finish.Doors to be provided

in the same manner with glass and SS handles 12"

height, locks, stopper, door closures to be provided.

150.00 Sft

3.0 Non Glazed Partition : -

Supplying and fixing of non glazed partition for

UPS,Dining, Entrance side,Records room & above

fully glazed partitions upto ceiling height & Strong

room @ 8' ht to be done using Jindal aluminium

rectangular sections of 63.5mmx38.1mm Aluminium

frame 1.70 mm thickness fixed with 6mm

plywood on both sides and 1mm laminated sheet

(approved colour) without glass.Doors to be

provided in the same manner with glass and

handles, locks stopper, door closures

to be provided.

290.00 Sft

4.0 Semi Partition : -

Semi partitions to be done at 4'0" ht,to be done using

Jindal aluminium rectangular sections of

63.5mmx38.1mm Aluminium frame 1.7 mm thickness

fixed with 6 mm plywood and both side 1mm

laminated sheet (approved

colour) for upto 3'0" ht and then balance 1'0" ht with

12 mm glass.

0.00 Sft

5.0 Wicket Gate: Size 4'-0" x 2'-6"

Wicket gate double door made of 2"x2" wooden

frame covered with 6mm plywood on both sides

finished with same lamination,edges are finished with

teak wood / beechwood beadings neatly polished.

1.00 Nos

FURNITURE & WOOD WORKS:-

6.0

Writing ledge: :Size : 5'0"x1'6"x3'6" ht

Writing desk to be done as per plan with 12mm

glass topped with 18mm plywood structure with

boxing as per

design by Architect, finished with 1mm laminate (

BOB ORANGE) outside and inside. Suggestion /

complaint box and cheque drop box with view glass

and locking provision in same manner to be

provided along with the writing desk.

1.00 Nos

7.0

Notice Board :Size : 5'0"x3'6" - (1 no) Fabrication and

fixing of notice board made of teak wood /beech

wood frame work alround filled with soft board and

covered with fur matching (BOB Orange). The outer

frame of the notice board is to be finished with

melamine polish.

1.00 Nos

8.0

Sub Staff Table:

Providing working top for sub staff using 18mm

plywood with lamination finished & fixed with Ebco

bracket supported on wall. Size: 3'3"x1'9" @ ht 2'6"

2.00 Nos

9.0

File cabinet :

Half Ht Size: 10'9"x1'6"x2'6" - 1no, Full ht 5'3"x1'6"x7'0" -

1no.

Providing and fixing 1'6" wide storage unit made of

18mm marine plywood finished with1mm lamination

of approved colour & pattern on top and all visible

sides with shelves inside laminated with 0.8mm

laminate. All exposed edges are finished with

hardwood lipping. Provided openable shutters with

SS handles, lock and auto closing hinges as per

design.

385.00 Sft

10.0

Dining Counter:

Size: 9'3"x1'9"x2'6" Supplying and fixing of pantry table

using 18mm plywood with proper support and

finished with matching lamination sheet, provided

for keeping bags and tiffin carriers.

0.00 Nos

11.0

Rolling Shutter Box:

Supplying & fixing of rolling shutter box using 18mm

thk, plywood with adequate support at the ends

and finished with lamination of approved make and

colour etc., complete.(If required)

65.00 Sft

12.0

OTHER WORKS :

Vertical Blinds: 100 mm wide Vertical Blinds of vista

levelor/Mac having top rail 39 mm x 34 mm (1.2 mm

thick ). The louver fabric shall be of polyster

viscose/polyster/ yarn as per approval. (colour-

need prior approval from Architect)

100.00 Sft

13.0

FALSE CEILING : -

False Ceiling with Gypsum Board:

Supply and erection of gypboard false ceiling for

Banking Hall& Manager Cabin as per design with

recessed ceiling in centre for manager cabin alone,

with framework of G.I. Section of spacing 4'0" x 2'0"

above with 12mm gypboard fixing. Rate is included

for cutouts for lights, smoke detectors and AC grills.

The ceiling is putty finished and sanded to form

clean and homogeneous surface. Rate is included

for two coats of acrylic emulsion painting.

1000.00 Sft

14.0

Step False Ceiling

4" verticals covered using 6mm plywood with

laminate finish (BOB ORANGE)

100.00 Rft

15.0

Grid Ceiling

Providing and fixing suspended false ceiling

consisting of Armstrong/ Decophone or equivalent

make 600mm x 600mm tiles suspended

on GI framework as per manufacturer specification

and as approved by Architects/ BOB. Rate quoted

to include cost of providing support

framework formed of perimeter channels for fixing

light fixtures, AC grills/diffusers etc. Also to provide

concealed perimeter channel

support as required to support modular grid ceiling

sections at junction between gypboard false ceiling

and modular grid tile ceiling.

Providing and fixing 50 mm Metal Axiom on periphry

of Modular ceiling as per the design and details of

the Architects.

150.00 Sft.

16.0

Cornice

Cornice as per Architects approval using imported

ready made design cornice to be fixed alround on

false ceiling inclusive of painting.

200.00 Rft

Wall Paneling: -

Wall panelling 4'0" height with 11/2"x1" hard wood

fixed to the walls and then covered with 6 mm

plywood and to be laminated with 1mm thk.laminate

of approved make and colour wooden cornice of

size 3"x2" has to be fixed on the top edge of wall

paneling as per design duly melamine polished of

approved colour etc.

17.0

80.00 Sft

TOTAL FURNISHING AMOUNT

To,

Date :


Bank Of Baroda,


M.G.Road, Bangalore.

BOQ FOR THE ELECTRICAL WORKS OF BANK OF BARODA AT CHIKKABALLAPUR BRANCH

SI NO

DESCERIPTION OF WORK QTY UNITS RATE AMOUNT

1.0 Main Electrical Panel Board (Factory made)

Supply, fabrication, erection, testing & commissioning of 1.00 Set

cubical type panel.

( Make:MDS/Hager/CRABTREE)

1 No.100A, 4 pole MCCB INCOMER

1 set TPN AL bus bar suitably rated

1 set 0-500 V voltmeter with selector switch & control fuses

1 set 0-100 A ammeter

1 set RYB phase indicating lamps with control fuses

OUTGOINGS

32 A 4 P MCB - 3 Nos

63 A 4 P MCB - 3 nos

B LIGHTING DB

Supply, Installation & Commisioing of the following

Three Phase,Phase segrigated Distribution board with

nuetral bar, earth bar, cables ties,top and bottom

removable gland plate and with

necessary adopter boxes if any. The DB should be

IP 42 metallic double door with provisioin of MCB &

ELCB etc as required including cuting of wall and

plastering the same with neat finish.It comprising as

follows:-


Incomer : 63A 4P MCB (DCMJCFPF063)

Outgoing: DCMJCSPF - 10/6A SP MCBs - 10 Nos

2.0 POWER DB

Three Phase, MCCB provision Distribution board with

neutral bar,earth bar,cables ties,top and bottom

removable gland plate and with necessary adopter

boxes if any.The DB should be IP 42 metallic double

door with provisioin of MCCB etc as

required including cuting of wall and plastering the

same with neat finish.It comprising as follows: -


Incomer : 63A TPN & Vertical MCCB

(DCDKTHDDCW04)

DCMJCFPF040 - 40A 4P MCCB - 1No

Outgoing: DCMJCSPF - 32A/25/20A SP MCBs - 10 Nos

1.00 Set

3.0 AC DB

Three Phase, MCCB provision Distribution board with

neutral bar,earth bar,cables ties,top and bottom

removable gland plate and with necessary adopter

boxes if any.The DB should be IP 42 metallic double

door with provisioin of MCCB etc as required

including cuting of wall and plastering the same with

neat It finish.comprising as follows: -

(Make:MDS/Hager/CRABTREE)

Incomer : 63A TPN &VerticalMCB (DCDKTHDDCW04)

40A 4 MCB - (DCMJCFPF040 )

Outgoings:

DCMJCSPF - 32/40 A SP MCB 6Nos

1.00 Set

4.0 CDB(12WAY SPN DB)

12 Way SPN Distribution board with nuetral bar,earth bar, 2.00 Set

cables ties,top and bottom removable gland plate and with

necessary adopter boxes if any. The DB should be IP 42 metallic

double door with provisioin of MCB&ELCB etc as required

including cuting of wall and plastering the same with ne at

finish.It comprising as


Incomer : 12Way SPN DB (DCDKTHDDCW12)

DCMJCFPF032 - 32 A DP - 1 No

Outgoing:

DCMJCSPF - 10/16A SP MCBs - 10Nos

5.0 Supply & Installation of 32A Metal Clad Socket with top in a

5.00 Set

specified company manufactured box with suitable rating MCB for

connecting A/C Split point & Strong room socket

6.0 Supply and fixing of 63A Rotter Switch for UPS input 2.00 Set

7.0 63A 4P Lever type Change Over Switch in Manual 1.00 Set

operation capable of making carrying and breaking courrents

under normal ( HCL/ Havells/GEM)


2.00 Set

specified company manufactured box with suitable rating DP MCB

breaker type for connecting UPS point & Strong room

socket

C LT CABLES

Supply & Laying of the following cables in built up trenches,on

wall, or in the ground as per the case may be,with proper clamping

with necessary fixing materials etc.Installing testing & commisioing

of 1100V grade UG cable as per IS 7098/1554

( Finolex/Universal)

1.0 3.5Corex70Sqmm Aluminium Armored cable 35.00 Mtr

2.0 4C x10Sqmm Copper Armoured Cable (UPS to ATM Power DB)

45.00 Mtr

3.0 4C x6Sqmm Copper Armoured Cable (VDB Panel to Power DB,

Lighting DB & Computer DB) 65.00 Mtr

End Termination of the above cables with proper Glands and Lugs

1.0 3.5Corex70Sqmm Aluminium Armored cable 4.00 Set

2.0 4C x10Sqmm Copper Armoured Cable 2.00 Set

3.0 4C x6Sqmm Copper Armoured Cable 6.00 Set

D WIRING

1.0 Light/Fan point wiring with 3 of 1.5 sqmm Finolex PVC insulated

copper conductor to be laid in 2mm suitable PVC conduit with

Bend,Couplings, etc.. And fixing with PVC clamps screws etc.All

conduits to be laid above theconduit with Bend,Couplings, etc..

And fixing with false ceiling/partition/concealed in the wall 6A

Modular type etc. plate and metal Box Wiring to be connected

with supply & fixing of switch (MK/ROMA/ CRABTREE) with

suitable Modular switches.

a) One light Controlled by One Switch 25.00 Pts

b) Two Lights Controlled by one Switch 10.00 Pts

c) 6A Switch box Sockets in the switch board itself 10.00 Pts

(combined position only)

d) 6A Switch box Sockets for wall fan point 8.00 Pts

e) Exhaust Fan points 1.00 Pts

f) Ceiling fan point with regulator 6.00 Pts

2.0 Supply & Wiring with Flame Retardant Insulated PVC copper wire

as per grade IS 994 for Circuits,Computer point,Power

points

within 2mm thk PVc conduits with necessary accessories and

with proper clamps and to be concealed below the false ceiling

It comprises as follows: -

a) 3Runs of 2.5Sqmm copper wire in PVC conduit for circuit

mains

240.00 Mtr

(Circuit mains LDB to All switch boards)

b) 3Runs of 2.5Sqmm copper wire in PVC conduit for Power

points

280.00 Mtr

(Power wiring for two table in one circuit)

c) 3Runs of 2.5Sqmm copper wire in PVC conduit for

computer points

310.00 Mtr

(UPS wiring for alternate UPS 1 & 2)

d) 4Runs of 6Sqmm copper wire+2.5Sqmm copper wire in

PVC

90.00 Mtr

conduit for (Split AC wiring)

e) 4Runs of 6Sqmm copper wire+2.5Sqmm copper wire in

PVC

25.00 Mtr

conduit ( UpS input/output)

f) 3Runs of 2.5Sqmm copper wire in UPS wiring for lights in 90.00 Mtr

Manager Cabin & Banking hall

E POWER POINT OUTLETS

1.0 Supply & Installation of 3 Nos of 6A Sockets controlled by 1No

14.00 Set

Switches with front plate with enclosure and other accessories etc..

(MK /ROMA/CRABTREE)

2.0 Supply & Installation of 1Nos of 6A Socket controlled by 1No 6A

8.00 Set

Switch with front plate with enclosure and other accessories etc..

(MK /ROMA/CRABTREE)


6.00 Set


(MK/ROMA/CRABTREE)

F LIGHTING FIXTURES

1.0 Supply, Fixing & Commisioning of Recess mounting type 15.00 Set

compact vertical Flat Panel 34W LED fitting in Down Rods with

white finish and other fixing accessories.,

2.0 Supply, Fixing & Commisioning of Recess mounting type 10.00 Set

compact vertical round shaped 1x15W LED downlighter fitting with

white finish and other fixing accessories.,

3.0 Supply & fixing of 22Watts LED tube light fiitings 12.00 Set

(Crompton / Havells)

4.0 Supply & Fixing of exhaust fan (Crompton / Havells) 1.00 Set

5.0 Supply & Fixing of Wall mounting Fan (Crompton / Havells)

8.00 Set

6.0 Supply & fixing of Orange/warm colour LED FLEXI Strip

Light

fittings in the stepped false ceiling area including the cost

of wiring etc., complete. 30.00 Mtr

7.0 Supply & fixing 7W LED bulb fitting including lamps. 3.00 Nos

8.0 Supply, Fixing & Commisioning of 48" ceiling fan with

necessary Down Rods andfan hook with all fixing

accessories., (Crompton / Havells) 6.00 Set

G EARTHING

1.0 Providing dedicated earthing with 600x600x3.15 mm copper plate

along with 50mm dia.10feet long G.I pipe with other accessories

in the earth filled with salt,charcoal,etc. It should be covered with

G.I Manhole cover with necessary civil works.etc.. 1.00 Set

2.0 Supplying of all materials and providing earth point, with

pipe earthling waste pipe earthling strips funnel etc. excavation

trenches, filling with alternate layers of charcoal, salt ands sand,

back filling as per BIS specifications and IS 3043/1987 2.00 Set

3.0 Supply & Laying of 10 Sqmm PVC Insulated Multi strand copper

conductor laid in 25mm dia PVC pipe for Dedicated earth leads

from the earth electrodes to the UPS system 30.00 Mtr

4.0 Supply & Laying of 8 SWG copper wire 40.00 Mtr

H TELECOMMUNICATION CABLING

1.0 Supply & Laying of 2 pair telephone cable in the 2mm Thk suitable

PVC conduit for all telephone points(delton) 160.00 Mtr

2.0 Supply & Fixing of RJ 11 Telephone Sockets 8.00 Set

3.0 Supply & Installation of 10Pair KRONE Box with Enclosure 1.00 Set

I DATA CABLING

1.0 Supplying & Fixing of D -Link CAT 6 10/100/1000 Mbps UTP Cable

including the cost of laying the cable etc.complete 320.00 Mtr

2.0 Supplying & Fixing of D -Link CAT 6 single information

outlet including the cost of punching & fixing etc., including ATM

12.00 Nos

3.0 Supplying & Fixing of D -Link 24 Port 10/100 Mbps Fast Ethernet

Switch 1.00 Nos

4.0 Supplying & Fixing of D -Link CAT 6 24 port patch panel including

punching & fixing etc., complete 1.00 Nos

5.0 Supplying & Fixing of D -Link CAT 6 3 Feet Patch cord 12.00 Nos


7.0 Supplying & Fixing of 9 U RACK 1.00 Nos

TOTAL ELECTRICAL AMOUNT FOR BRANCH

To, Date :


Bank Of Baroda,



BOQ FOR THE AIRCONDITIONING WORK OF BANK OF BARODA AT CHIKKABALLAPUR BRANCH

SI NO

DESCERIPTION OF WORK QTY

UNITS RATE

AMOUNT

SPLIT AIR CONDITIONER

3.0 Installation Charge for Split AC 6.00 Nos

4.0 Supply & Fixing of 4/ 5 K va Voltage Stabilizer 6.00 Nos

5.0 Out door unit stand 6.00 Set

6.0 Supply & Laying of PVC drain pipe 30.00 Mtr

7.0 Supply & Laying of Copper pipe 40.00 Mtr

8.0 Civil works like cutting AC hole,packing,drain pipe cutting and

packing with mortar etc. 1.00 Ls

TOTAL AIR-CONDITIONING AMOUNT

To, Date :


Bank Of Baroda,



BOQ FOR INTERIOR WORK IN BANK OF BARODA, MINI LOBBY AT CHIKKABALLAPUR BRANCH

SI NO DESCERIPTION OF WORK QTY UNITS RATE AMOUNT

PARTITION:-

1.0 Fully Glazed Partition :

Providing fully glazed partitions with patch fittings @8'6" ht. and door

size : 3'6"x7'0", using 12mm thk toughend glass for the Entrance by

supporting the glass by 3" thk partition from the true celling covered

by 8mm thk ply on both sides and finished with 1mm thk

lamination of approved colour upto a height of 1'0" only below the

false ceiling level.(above the false ceiling level measurement taken

as non glazed partition) Though the partiton frame work is supported

from the true ceiling measurement will be taken on ly below false

ceiling.The partiton glass will be supported by aluminium channel

10mm width which is fixed on the floor by cutting the floor. The

glass will be tightened by providing rubber gaskets on both sides.

The entire work to be done to the design & satisfication of the

Architect.The glass to be fitted with DORMA SS patch fittings

and the rates to be quoted inclusive of all the fittings and other

accessories.Door to be provided with SS handle ( satin fiernish)

of 12" length as per Architect's approval. 50.00 Sft

2.0 Non Glazed Partition:

Supplying and fixing of non glazed partition for E- Lobby

entrance & ups partition upto ceiling height to be done

using Jindal

aluminium rectangular sections of 63.5mmx38.1mm Aluminium

frame 1.70 mm thickness fixed with 6mm plywood on both sides

and 1mm laminated sheet (approved colour) without glass. Doors to

be provided in the same manner without glass and handles, locks,

stopper, door closures to be provided. 195.00 Sft

3.0 Solid Partition:

Providng and fixing of full ht solid partition made out of salwood frame

centre to centre section size 2"x 2" both ways rigidely fixed/covered

with wooden plug/raw plug with 9 mm thk comm. ply and MS Grill (

4"x4" c/c of 8 mm squre bar duly painted with enamel pait and metal

based perimer) sandwitchted between wooden frame and 9mm thk.

ply to strengten partition, finished with one side with 1 mm thick

laminate and other side with 6mm thick extra clear white back

painted glass in plumb line and level, fixed with groove, finished the

joints/grooves with matching colour silicon. M.S. grill shall be

fixed/grouted firmely at ground and ceiling at every 2' interval with

heavy duty hold fast or as directed by bank.rate shall be of inclusive

of P/f of silver metal coated laminates skirting of 75mm high &

groove at skirting level. Basic Rates of extra clear white

back painted glass is Rs. 175/- per sq.ft. 0.00 Sft

3.0 FALSE CEILING

GYPSUM BOARD:

Supply and erection of gypboard false ceiling for E-LOBBY as per

design with suspended ceiling in centre for manager cabin and

Banking hall, with framework of G.I. Section of spacing 4'0" x2'0"

above with 12mm gypboard fixing. Rate is included for cutouts for

lights .The ceiling is putty finished and sanded to form clean and

homogeneous surface. Rate is included for two coats of acrylic

emulsion painting. 130.00 Sft

4.0 WALL PANELING

Providing and fixing of wooden paneling made out of salwood frame

at 2' centre to centre bothways in section size 2"x2" & covered with

9mm thk plywood and finished with 6mm thk white back painted

glass approved colour, 3" skirting of above 1' ht from ffl lvl and

border of 3" at ceiling lvl in BOB orange) 85.00 Sft

5.0 DIVIDER PARTITION

Divider partition to be done between each machines using non

glazed partition for a ht of 1'3" and fixed with 12mm thk glass for

3'9" ht as per design, with ss brackets 2.00 Nos

6.0 ROLLING SHUTTER BOX

Supplying & fixing of rolling shutter box using 18mm thk, plywood

with adequate support at the ends and finished with lamination of

approved make and colour etc., complete. (If required) 100.00 Sft

7.0 Providing and making cheque drop box 1'3"x1'6"x(9" deep ) as per

design & pattern with 19 mm ply finished exterior surface with 6mm

thick extra clear white painted glass having 4"x1" slots with 3 mm

thick S.S. plat pasted with metal adhesive. Rate shall includes all

necessary hardwares an d locking and side opening arrangements.

1.00 Nos

8.0

Sandwitch acrylic pamplet holder (architect approved color)

2.00 Nos

TOTAL INTERIOR RENOVATION AMOUNT

To,


Bank Of Baroda,



SI NO DESCERIPTION OF WORK QTY

UNITS

A CDB (12WAY SPN DB)

1.0 12 Way SPN Distribution board with nuetral bar,earth bar,cables

ties,top and bottom removable gland plate and with necessary

adopter boxes if any. The DB should be IP 42 metallic double door

with provisioin of MCB & ELCB etc as required including cuting of

1 wall and plastering the same with neat finish.It comprising

as follows :-


Incomer : 12Way SPN DB (DCDKTHDDCW12)

DCMJCFPF032 - 32 A DP - 1 No

Outgoing:

DCMJCSPF - 10/16A SP MCBs - 6Nos 1.00 Set


specified company manufactured box with suitable rating MCB for

connecting A/C Split point 2.00 Set

3.0 Supply and fixing of 63A Rotter Switch for UPS input 1.00 Set

4.0 Supply & Installation of 32/20A Metal Clad Socket with top in a

specified company manufactured box with suitable rating DP MCB

breaker type for connecting UPS point . 1.00 Set

B LT CABLES

Supply & Laying of the following cables in built up

trenches,on wall,

or in the ground as per the case may be,with proper clamping with

necessary fixing materials etc.Installing testing&commisioing of

1100V grade UG cable as per IS 7098/1554 (Finolex/ Universal)

1.0 4C x10Sqmm Copper Armoured Aluminium Cable (VDB to E-lobby)

40.00 Mtr

2.0 End Termination of the above cable with proper Glands and Lugs:

4Cx10sqmm 2.00 Set

C WIRING

1.0 Light/Fan point wiring with 3 of 1.5 sqmm Finolex PVC insulated

copper conductor to be laid in 2mm suitable PVC conduit with Bend,

Couplings,etc.. And fixing with PVC clamps screws etc.All conduits

to be laid above theconduit with Bend,Couplings, etc.. And fixing

with false ceiling/partition/concealed in the wall 6A Modular type

etc. plate and metal Box Wiring to be connected with supply &

fixing of switch (MK/ROMA/ CRABTREE) with suitable Modular

switches

a) One light Controlled by One Switch 2.00 Pts

b) Two Lights Controlled by one Switch 1.00 Pts

c) 6A Switch box Sockets in the switch board itself (combined

position only) 1.00 Pts

2.0 Supply & Wiring with Flame Retardant Insulated PVC copper wire

2 as per grade IS 994 for Circuits,Computer point,Power points

within 2mm thk PVc conduits with necessary accessories and

with proper clamps and to be concealed below the false ceiling

It comprises as follows: -

a) 3Runs of 2.5Sqmm copper wire in PVC conduit for circuit mains

(Circuit mains LDB to All switch boards) 25.00 Mtr

b) 3Runs of 2.5Sqmm copper wire in PVC conduit for computer points

(UPS wiring) 50.00 Mtr

c) 2Runs of 4Sqmm copper wire+2.5Sqmm copper wire in PVC

conduit for (Split AC wiring) 65.00 Mtr

d) 2Runs of 6Sqmm copper wire+2.5Sqmm copper wire in PVC

conduit for (UPS Input & output m/c) 15.00 Mtr

D POWER POINT OUTLETS

1.0 Supply & Installation of 3 Nos of 6A Sockets controlled by 1No 5

A Switches with front plate with enclosure and other accessories

etc..(MK/ROMA/CRABTREE) 4.00 Set



(MK/ROMA/CRABTREE) 6.00 Set

E LIGHTING FIXTURES

1.0 Supply, Fixing & Commisioning of Recess mounting type compact

vertical Flat Panel 34W LED fitting in Down Rods with white finish 3.00 Set

and other fixing accessories.,

2.0 Supply, Fixing & Commisioning of Recess mounting type compact

vertical round shaped 1x15W LED downlighter fitting with white

finish and other fixing accessories., 2.00 Set

3.0 Supply & fixing of Orange/warm colour LED FLEXI Strip Light fittings

in the stepped false ceiling area including the cost of wiring etc.,

complete. 5.00 Mtr

F DATA CABLING

1.0 Supplying & Fixing of D -Link CAT 6 10/100/1000 Mbps UTP Cable

including the cost of laying the cable etc.complete 60.00 Mtr

2.0 Supplying & Fixing of D -Link CAT 6 single information outlet

including the cost of punching & fixing etc., 4.00 Nos


TOTAL ELECTRICAL AMOUNT FOR BRANCH

To, Date :


Bank Of Baroda,



BOQ FOR THE AIRCONDITIONING WORKS OF BANK OF BARODA, MINI-LOBBY AT CHIKKABALLAPUR BRANCH

SI NO DESCERIPTION OF WORK QTY UNITS RATE AMOUNT

SPLIT AIR CONDITIONER

1.0 Installation Charge for Split AC 2.00 Nos

2.0 V-Guard Make 5 K va Voltage Stabilizer 2.00 Nos

3.0 Out door unit stand 2.00 Set

4.0 Supply & Laying of PVC drain pipe 10.00 Mtr

5.0 Civil works like cutting AC hole,packing,drain pipe cutting and

packing with mortar etc. 1.00 Ls

6.0 Supply and fixing of timer 1.00 Nos

TOTAL AIR-CONDITIONING AMOUNT

Bank Of Baroda,



BOQ FOR THE MODULAR FURNITURE/CHAIRS WORKS FOR BANK OF BARODA AT CHIKKABALLAPUR BRANCH

S.NO. DESCRIPTION. QTY UNIT RATE AMOUNT

1.00 DM DESK of size 1800 x 900 x 750MM including

Keyboard

tray CPU trolly without any pedestal or credenza. 1.00 Nos.

2.00 LINEAR WORKSTATION OFFICER TABLE (1350MMx1100MM)

Providing designing and installing minimum 65 mm thk modular partition frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate section (minimum 40 mm x 40 mm) The frame structure covering and Top trim / side trim made out of MS with powder coating (50 microns). All MS Horizontal and vertical sections are extruded from AA 6063 American standard alloy with 12 HRC hardness of Architectural grade (IS 10259:1982) of 16 gauge minimum. The thicknesses of extruded sections vary based on its design and its point load bearing design engineering. The skinning / panels / tiles to be of 12mm thk MDF exterior grade with 1mm thk laminate till 1200mm height from the floor level for outside facia. Inside facia = fabric panel with MS sheet minimum 0.6mm thk and 12 mm MDF exterior grade panel with 1 mm laminate above table top (450 mm height). 12 mm MDF exterior grade panel and 1 mm 3.00 Nos.

The edges to be capped (as per approved design and drawing) MS end trim with powder coating. Cost to include that for provision of fixing switches & the necessary cut out for the same. The height of the partition to be 1200mm. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / MS race ways 2 nos / wire management cleats / runners etc. (Basic cost of fabric Rs. 200/- per running meter.)

3.00 LINEAR WORKSTATION STAFF TABLE (1200MMx600MM)



4.00 CASH CABIN TABLE/ PATIOTION (1300MMx600MM)



5.00 PEDESTAL

Providing and installing drawer boxes of size 585mm

ht., 390mm width and 500mm deep, top made out

of 25mm thk exterior grade MDF finished with 1.5mm

thk laminate, front and sides made of 12mm thk

MDF finished in 1mm thk laminate and back, drawer

bottom to be 10.00 Nos.

7.00 PULL OUT TRAY FOR KEYBOARD

Providing & Installing 480mm wide MS key board pull

out tray with (180mmx180mm) provision to house

mouse made out of MS with black matt finished

powder coating with telescopic channel. 10.00 Nos.

8.00 CPU TROLLEY

Providing & Installing 125mm to 225mm adjustable

CPU trolley made out of MS with black powder -

matt finish coating with lockable castors

(4 nos). 10.00 Nos.

9.00 GLASS DIVIDER

Providing & Installing quarter round (600mm radius)

12mm thk intermediate toughened frosted glass

divider with necessary fittings & hardware above

table top. The edges of the glass to be machine

polished as per drawing no 3731 - wd - 05 ñ 1.2 ñ

PROG 6.00 Nos.

10.00 LEG PANEL/GABLE END

Providing & Installing 600mm x 725mm Leg

panels/gable ends made up of 25mm thick MDF

exterior grade with 1mm thk laminate on both sides.

All edges to be lipped with minimum 2mm thick PVC

edging. Drawing number 3731 WD-02 -1.2-PROG 6.00 Nos.

11.00 SIDE CREDENZA 3'-0"x2'-6" 1.00 Nos.

12.00

MANAGER CHAIR 1.00 Nos.

Base: 5 star 680 mm dia M.S. Powder Coated.

Castors: 65 mm nylon twin castors with load

controlled braking. Class III Tested for minimum 1

lakh cycles.

Make MDI / WDF / of any equivalent.

Gas Lift: It is covered with telescope cover made of

polypropylene.

Seat: Cushion support is made of Polymide with steel

insert.Cushions are made of cold moulded Poly-

Urethane foam.

Density - app. 55-60 kg/m(, Shain hardness 6.8 kpa.

Special clip-on design enables removable cushion

assembly. Cushion seat in composite leather

upholstery(Basic Rs. 2000/Mts)

Multi position seat depth adjustmentSeat angle

adjustment- manual locking.

Back: Aluminium die cast back rest support-Silver

powder coated of polished. Polypropylene cushion

support.Cushions are made of cold moulded Poly-

Urethane foam. Back in composite leather

upholstery Density - app. 52-57 kg/m(, Shain

hardness 5.0 kpa. Special clip-on design enables

removable cushion assembly.

Lumbar support adjustable in height and curvature.

Back rest covered with PP injection molded shell.

Mechanism: Synchro mechanism. Back inclination

lockable in multi - position with safety clutch

features. Automatic back rest

tension control to suit user's body weight (45-100 kgs)

Diecast aluminium seat support.

Armrest: Multi functional arm rest with aluminium die

cast

support.(2 dimensional)

Head Rest : Height adjustment with no touch system

Lockable in multi positions Tilt adjustment by means

of 3 fold locking mechanism.

OFFICERS CHAIR 5.00 Nos.


Castors: 65 mm twin castors with load controlled

braking.

Gas Lift: Class III Tested for minimum 1 lakh cycles.

Make MDI / WDF / of any equivalent. It is covered

with telescope cover made of poly propylene.

Seat: Cushion support is made of injection moulded

plastic.

Cushions are made of cold moulded Poly-Urethane

13.00

foam with fabric upholstery Density - app. 55-60

kg/m(, Shain hardness

6.8 kpa. Special clip-on design enables removable

cushion assembly. Multi position seat depth

adjustment

Back: Back is moulded plastic frame with Net fabric

which enables air circulation -colour Black

Lumbar support adjustable in height and curvature.

Mechanism: Synchro mechanism. Back inclination

lockable in multi - position with safety clutch

features. Tension control -

Adjustment 45 to 90 Kgs. Most important features is

tension control knob is side activated telescopic

rotating motion which allows user a comfortable

way in seated position to regulate the

tension.Diecast aluminium seat support.It also has -

ve tilt features.

Armrest: Fixed / Height adjustable, arm rest with

aluminium

die cast support.

14.00 STAFF CHAIRS 4.00 Nos.


Castors: Twin castors 50 mm dia wheels made of

Poly Propylene

Gas Lift : Class III Tested for minimum 1 lakh cycles.

Make MDI / WDF / of any equivalent. It is covered

with telescope

cover made of poly propylene.

Seat: Cushion support is made of injection moulded

P.P. Support

& Cushions are covered by composite Fabric

upholstery cover.

Cushions are made of cold cured self-skinned

moulded Poly-

Urethane foam - Fire retardant. Density: min. 50

kgs/m(, Hardness

6.8 kpa. Seat depth adjustment (Optional)

Back: Cushion support is made of hot pressed

formed plywood.

Support & Cushions are covered by composite

leather upholstery

cover. Cushions are made of cold cured self-skinned

moulded

Poly-Urethane foam. Adjustable back height.

Mechanism: Synchro mechanism with forward

biased pivot location.

Back inclination lockable in multi - position with anti

shock features.

Support made of MS Powder Coated.- diecast and

plastic parts.

Additional features of -ve tilt. Tension control -

Adjustment 45 to

90 Kgs. Most important features is tension control

knob is side

activated telescopic rotating motion which allows

user a comfortable

way in seated position to regulate the tension.

Armrest: Moulded self-skinned PU/PP pads with steel

/ plastic bracket. Adjustable with 2D movements.

15.00

VISITORS CHAIRS 9.00 Nos.

Base: 620 mm dia GF Poly Propylene 5-star base

Castors: Twin castors 50 mm dia wheels made of

Poly Propylene.

Gas Lift: Class III Tested for minimum 1 lakh cycles.

Make MDI / WDF / of any equivalent.It is covered

with telescope

cover made of poly propylene.

Seat: Cushion support is made of hot pressed

plywood. Injection

moulded plastic seat shell with inbuilt stiffeners to

cover support

& cushions are made of cold cured self-skinned

moulded

foam having properties similar to Visco-Elastic foam

Density: 52-55 Kg/cm:, Tensile strength - 0.8-0.9

kg/cm:

Tear strength - 0.4 kg/cm:-(min), Resilience -

60%(min), Elongation

80% (minimum) Hardness - 8.5 to 9 kg at 25 %.

Dimension: seat depth 480 mm, width 620 mm with

arm.

Back: Cushion support is made of hot pressed

plywood.

Support & Cushions are covered with unique design

of half

upholstered & half plastic injection moulded shell.

Cushions are made of cold cured self-skinned

moulded Poly-

Urethane foam having properties similar to Visco-

Elastic foam.

Density: 52-55 Kg/cm:, Tensile strength - 0.8-0.9

kg/cm:

Tear strength - 0.4 kg/cm:-(min), Resilience -

60%(min), Elongation

80% (min) Hardness - 8.5 to 9 kg at 25 %.

Dimension: Back height 480 mm, width 515 mm.

Mechanism: 4 M Knee tilt synchro with pivot at front

edge of seat.

Back inclination lockable at Multi - positions with anti-shock

features Tension: Body weight control is 45-90 kgs.

Seat support: Embossed metal plate with powder coating.

Armrest: Fixed / Height adjustable, self skinned PP arms

with

steel bracket.

16.00

PERFORATED CHAIRS FOR CUSTOMER WAITING

Material: For Metro /Urban banking - Seating sofas

shall be with cushioned back and seatsahall be

made in black leather which makes the customer

waiting time more relaxing and comfortable.

Maintenance : Upholstery can be wiped with a

clean cloth daily and easy to maintain.

Location : Easily accessible and visible - Near Cashier

and front Office Staff.

For Rural/ Semi Urban - SS framed seat and back

with SS frame and base, finished.

Maintenance : Seat abd back can be wiped with a

clean cloth daily and easy to maintain.

3.00 Nos.

Modular Work &Chairs Total


Bank Of Baroda,



Sub: Summary for the Proposed Interior & Electrical AC, Data and Chairs At Chikkaballapura

Branch.

S.NO. DESCRIPTION TOTAL

1.00 Furnishing work for Branch

2.00 Electical works for Branch

3.00 Air conditioning works for Branch

4.00 Interior Work For Mini Lobby

5.00 Electrical Work For Mini Lobby

6.00 Air conditioning works for Mini Lobby

7.00 Modular Furniture / Chairs Works

TOTAL

GST.@18%.

GRAND TOTAL

Old Record Up

13'-7" x 12'-0"

Stationary 13'-0" x 9'-9"

Safe Room Strong Room 5'-0" x 9'-7" 8'-0" x 9'-7"

movable storage

The Deputy General Manager Bank Of Baroda, Regional Office ...

Documents

Transcript of The Deputy General Manager Bank Of Baroda, Regional Office ...