www.gabrielash.com

01829 271888

the coldframe assembly instructions

Screw Kit

Screw s-steel csk pozi 4.2mm x 65mm SC027

Screw s-steel panhead pozi 4.2mm x 25mm SC125

Screw s-steel csk pozi 4.2mm x 45mm SC025

Washer brass surface cup No. 8 WA301

Washer s-steel spring M6 WA600

Washer s-steel formg M6 x 18mm WA002

Nut s-steel wingnut M6 NU200

Bolt s-steel coachbolt M6 x 90mm BL427

1. Fix Stay Locating Block and Stays

I. II. III.

IV. V.

SC025 x 2

BL427

WA002

NU200

WA002

WA600

2. Fix Side Panels and Back Panel

I. II.

III. IV.

SC027 &

WA301 x 2

3. Fix Hinge Pieces to Back Panel and Lid at Pre-marked Pilot Holes

SC125x 2

SC125x 2

4. Fit Lid. Only when the lid is at the correct angle will the hinges slot together and hinge as normal.

SC125x 2

5. Additional Instructions for Grand Coldframe

The stays and locating blocks are

fitted as shown below A drainage channel is fixed through the pre marked

holes in the front and rear panel top rails.

The lids are handed – left hand and right hand. It is VITAL

that they are fitted correctly.

The underside of the left hand lid has the corner machined

away (rebated) along its right hand edge. The right hand lid

is rebated on the underside of its left hand edge.

6. Fit Lids

Left Lid

Right Lid

Rebates