THE CARY LOOM VAC/BLOW-OFF SYSTEM FOR DORNIER LOOMS · 3. Rapier Opening Area Blow-Off Nozzle blows...

4
C:\Internet\Cary\images\Dornier\flyer.505.wpd THE CARY LOOM VAC/BLOW-OFF SYSTEM FOR DORNIER LOOMS The CARY System utilizes the vacuum and exhaust air of a 1 HP regenerative blower to concentrate vacuum and exhaust air to specific areas of the loom that cause problems when lint and fly accumulate. The four (4) nozzles used are: 1. Elitex Guide Blow-Off Nozzle to prevent build-up of lint in the eyelets. 2. Selector Finger Suction Nozzle collects fly generated by fill yarn passing through finger guides. 3. Rapier Opening Area Blow-Off Nozzle blows air into this area and helps prevent rapier problems, as well as migration of fly to the fabric. 4. Right Hand Side Tail Suction Nozzle removes lint, but also controls tails with suction tension and prevent s loo p-backs of t he tail. The following phot os illustr ate t he nozzles and their locat ion.

Transcript of THE CARY LOOM VAC/BLOW-OFF SYSTEM FOR DORNIER LOOMS · 3. Rapier Opening Area Blow-Off Nozzle blows...

Page 1: THE CARY LOOM VAC/BLOW-OFF SYSTEM FOR DORNIER LOOMS · 3. Rapier Opening Area Blow-Off Nozzle blows air into this area and helps prevent rapier problems, as well as migration of fly

C:\Internet\Cary\images\Dornier\flyer.505.wpd

THE CARY LOOM VAC/BLOW-OFF SYSTEMFOR DORNIER LOOMS

The CARY System utilizes the vacuum and exhaust air of a 1 HP regenerative blower to concentrate

vacuum and exhaust air to specific areas of the loom that cause problems when lint and fly accumulate.

The four (4) nozzles used are:

1. Elitex Guide Blow-Off Nozzle to prevent build-up of lint in the eyelets.

2. Selector Finger Suction Nozzle collects fly generated by fill yarn passing through finger

guides.

3. Rapier Opening Area Blow-Off Nozzle blows air into this area and helps prevent rapier

problems, as well as migration of fly to the fabric.

4. Right Hand Side Tail Suction Nozzle removes lint, but also controls tails with suction

tension and prevents loop-backs of the tail.

The following photos illustrate the nozzles and their locat ion.

Page 2: THE CARY LOOM VAC/BLOW-OFF SYSTEM FOR DORNIER LOOMS · 3. Rapier Opening Area Blow-Off Nozzle blows air into this area and helps prevent rapier problems, as well as migration of fly

C:\Internet\Cary\images\Dornier\flyer.505.wpd

PHOTO 1

Dornier Loom Right Hand Side Tail Suction

Left Hand Side Rapier OpeningArea Blow-Off

PHOTO 2

Left Hand Side Rapier Opening Area Blow-Off

PHOTO 3

Left Hand Side Rapier OpeningArea Blow-Off

Left Hand Side Selector Suction Nozzle

Page 3: THE CARY LOOM VAC/BLOW-OFF SYSTEM FOR DORNIER LOOMS · 3. Rapier Opening Area Blow-Off Nozzle blows air into this area and helps prevent rapier problems, as well as migration of fly

C:\Internet\Cary\images\Dornier\flyer.505.wpd

PHOTO 4

Left Hand Side Eltex Guide Blow-Off

Left Hand Side Selector Suction Nozzle

PHOTO 5 & 6

15 Gallon Vacuum Receiver with 1 HP Vacuum Pump

Page 4: THE CARY LOOM VAC/BLOW-OFF SYSTEM FOR DORNIER LOOMS · 3. Rapier Opening Area Blow-Off Nozzle blows air into this area and helps prevent rapier problems, as well as migration of fly

C:\Internet\Cary\images\Dornier\flyer.505.wpd

PHOTO 7

Dornier Loom Right Hand SideTail Suction Nozzle

Left Hand Side Rapier OpeningArea Blow-Off

PHOTO 8 & 9

Right Hand Side Tail Suction Nozzle