The Canadian Leader in High Performance FRP Pipe, Fittings ......The Canadian Leader in High...
Transcript of The Canadian Leader in High Performance FRP Pipe, Fittings ......The Canadian Leader in High...
The Canadian Leader in High Performance FRP Pipe, Fittings, Flanges, and Valves
Fibreglass Solutions Inc. is a Canadian company that is dedicated to the specification, sales, and installation training of FRP piping systems, FRP valves, and specialty FRP components for corrosive or hazardous fluid handling applications.
We specialize in solving the corrosion problems of various end‐users by providing application specific solutions with emphasis on long‐term performance and capital costs.
We provide our customers with assistance in product selection, system design and layout, material supply as well as installation training, site start‐up supervision, and bonder quality control.
Stocking locations are in Edmonton, Estevan, and Woodstock. Additional technical sales support and field service is available out of Vancouver and Calgary.
Detailed technical literature is available on all of the piping products that we represent. Please contact us and tour our website.
Material Selection & Supply Component Design Installer Training & Certification
Clients include: Agrium, Apache, Areva, CNRL, Fiat Chrysler, Conoco Phillips, Crescent Point, Dofasco, Devon Energy, Dow Chemical, Encana, Enerplus, EOG Resources, Ford, Gulf Chemicals, General Motors, Harvest, Honda, Imperial Oil, MEG Energy, Mosaic, NAL Resources, Nova, Plains Midstream, Potash Corporation of Saskatchewan, Proctor & Gamble, Repsol, SaskPower, Seaspan, Shell, Suncor, Syncrude, Toyota, TransAlta, US Steel, Weyerhaeuser and many others.
Much of the material selection and component design service that we provide is done in conjunction with various Canadian engineering firms, whom we support through product recommendations, detail design, budget estimates, and technical presentations.
FRP PIPE & FITTINGS
Fibreglass Solutions is the Canadian authorized stocking distributor for Fiber Glass Systems, (www.fgspipe.com) and works to promote the specification, sales, and installation of FRP piping products recognized through the heritage brand names of Star™‐Smith™‐Fibercast™‐Bondstrand™.
STAR™ • SMITH™ • FIBERCAST™ • BONDSTRAND™
Fiber Glass Systems is headquartered in San Antonio, Texas, and manufactures FRP pipe and fittings in diameters ranging from 1” up to 72”. These products can be manufactured from a variety of resins to produce corrosion resistant piping systems that outperform steel pipe (carbon or stainless), composite flexible piping (steel/plastic/FRP) or thermoplastics.
Markets covered by Fibreglass Solutions;
Chemical & Industrial Brine, process water, industrial wastewater, hot water, cooling water, acids & caustics.
Hot hydrochloric acid District Heating Chilled Water Piping Hot Slurry Systems
Oilfield Vapour recovery, produced water, high pressure line pipe, acid piping, tubing & casing.
Produced Water Acid piping Line Piping Casing Insertion
Marine & Offshore Shipboard & platform piping, ballast water, grey water, waste water, caissons.
Fire fighting Water and Fire water Fire rated piping Offshore Platforms
Oil Sands Recycle water, brackish water, hot & warm water, produced water, acids, caustics, slurries.
Hot Water Supply Gland Water Recycle Cooling Water Warm Water Piping FRP BALL & BUTTERFLY VALVES
Fibreglass Solutions distributes FRP ball, butterfly, and check valves manufactured by Nil‐Cor LLC.
Nil‐Cor valves are an excellent compliment to any FRP piping system, particularly when long‐term performance in a corrosive environment is a concern. Applications that have been proven with an exemplary service record include H2S, hot hydrochloric acid, caustic, and brine.
These valves are available in wide range of diameters (½” to 42”), with pressure ratings from 25 to 275 psi. Canadian Registration Numbers apply for the 1” to 12” diameters. (www.nilcor.com)
Chemical/ Acid Systems Water Treatment Sulphuric Acid Service Vent Piping
Technical Tip: Backing Rings & Flange Spacers A common question arises when mating a compression molded style of flange to a raised face steel or polymer connection. We inventory epoxy coated backing rings that are used in conjunction with compression molded FRP flanges where increased stiffness is required to prevent bending at raised face steel flanges. (Filament‐wound flanges can be mated directly to raised‐face surfaces using a gasket without needing a spacer or backing flange).
2‐piece Backing Flange Spacer Ring
In addition, or in lieu of using backing rings if mating molded FRP flanges to raised face steel, a non‐metallic spacer ring can be used to effectively render the steel flange into a flat‐faced connection.
Fibreglass Solutions would be pleased to assist with any and all FRP pipe, fitting, and valve
requirements. Specific areas where our expertise is of particular value include;
Process Review. Material Selection. Design & Layout Recommendations. 3‐D Drawing Library (most products). Budget/ Capital Estimates. Specification/ Line Class Review. Line Class Preparation. Installation Training & Certification. Bonder Quality Control. ASME B31.3 Compliance. Confirmation of inputs for stress analysis. Start‐up Supervision.
Please visit our website at www.frpsolutions.com for more details and contact information, or
call us anytime to see how we can help solve most of the corrosion problems that are plaguing
industry today.
www.frpsolutions.com
Your partner in technical excellence.
Woodstock – Estevan – Calgary – Edmonton – Vancouver
The Canadian Leader in High Performance FRP Pipe, Fittings, Flanges, and Valves
FIBREGLASS PROCESS PIPE, FITTINGS, & FLANGES
Manufacturer Trade Name Diameter Pressure (psi) Temperature (°C)
NOV FiberGlass Systems Red Thread® HP 2” – 30” 150 / 300 Up to 99
NOV FiberGlass Systems Green Thread® HP 1” – 42” 150 / 290 / 464 / 580 Up to 107
NOV FiberGlass Systems Centricast® Plus RB‐2530 1” – 14” 150 Up to 120
NOV FiberGlass Systems Z‐Core® 1” – 8” 150 Up to 135
NOV FiberGlass Systems Centricast® Plus CL‐2030 1” – 14” 150 Up to 99
NOV FiberGlass Systems Silver Streak® 2” – 48” 150 / 225 Up to 99
NOV FiberGlass Systems Ceram Core® 6” – 16” 200 / 100 Up to 93
NOV FiberGlass Systems F‐Chem® 4” – 72” 150 Up to 99
NOV FiberGlass Systems Bondstrand® 2400 2” – 40” 150 – 725 Up to 121
NOV FiberGlass Systems Bondstrand® 2000/4000 1” – 16” 150 – 300 Up to 121
NOV FiberGlass Systems Bondstrand® 3000/3200 2” – 16” 150 – 450 Up to 99
NOV FiberGlass Systems Bondstrand® 2000M/7000M 2” – 16” 150 – 225 Up to 99
FIBREGLASS LINE PIPE & TUBING
Manufacturer Trade Name Diameter Pressure (psi) Temperature (°C)
NOV FiberGlass Systems Star® Fiberglass AH 1 ½” – 8” 800 – 3000 Up to 65
NOV FiberGlass Systems Star® Fiberglass AA 1 ½” – 8” 800 – 2500 Up to 100
FIBREGLASS BALL, BUTTERFLY, & CHECK VALVES
Manufacturer Trade Name Diameter Pressure (psi) Temperature (°C)
Nil‐Cor® LLC Nil‐Cor Ball Valve 1” – 8” 150 – 275 Up to 135
Nil‐Cor® LLC Nil‐Cor Slurry Ball Valve 1” – 6” 150 – 275 Up to 135
Nil‐Cor® LLC Nil‐Cor Threaded Ball ½” – 2” 150 – 275 Up to 135
Nil‐Cor® LLC Nil‐Cor Ball Check Valve 1” – 6” 150 – 275 Up to 135
Nil‐Cor® LLC Nil‐Cor 3‐Way Valve 1 ½” 150 – 275 Up to 135
Nil‐Cor® LLC Nil‐Cor Butterfly Valve 2” – 36” 150 Up to 120
Nil‐Cor® LLC Nil‐Cor Swing Check 3” – 12” 150 Up to 120 Notes: CRN’s available for fittings, flanges and valves. Fibreglass Solutions can provide bonder certification to ASME B31.3 and/or ISO 14692 standards. Conductive and Fire‐Protected Marine Offerings are available. We hold all major Marine/Offshore Certificates and Type Approvals.